AWCR-2.00MD-C30 [ABRACON]

Ceramic Resonator, 2MHz Nom,;


型号：	AWCR-2.00MD-C30
厂家：	ABRACON
描述：	Ceramic Resonator, 2MHz Nom, 晶体谐振器
文件：	总3页 (文件大小：2537K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

LEADED BUILT-IN CAPACITANCE CERAMIC RESONATOR

RoHS/RoHS II Compliant

Pb in ceramic, exemption (7c-I)

AWCR-MD

_|Size Varies _|

FEATURES:

APPLICATIONS:

• Built-in capacitors save space & components

• Low cost timing solution.

• Small size, Light weight

• Microprocessor clocks.

• Electric appliances.

• Remote controls.

• Industrial controllers.

• General timing.

ELECTRICAL CHARACTERISTICS:

Parameters

Frequency Range

Minimum

2.00

Typical

Maximum

Units

Notes

6.00

MHz

12.51

60.00

2.00 MHz ~ 2.99 MHz

3.00 MHz ~ 6.00 MHz

12.51 MHz ~ 60.00 MHz

2.00 MHz ~ 6.00 MHz

12.51 MHz ~ 13.00 MHz

13.01 MHz ~ 20.00 MHz

20.01 MHz ~ 25.99 MHz

26.00 MHz ~ 60.00 MHz

Resonant Impedance (Ro)

Ω

17.6

26.4

Standard Built-in Capacitance

(C1=C2)

Frequency Tolerance

Frequency Stability

Withstanding Voltage

-0.5

-0.3

+0.5

+0.3

-25ºC to +85ºC

DC , 1 min

Vdc

Vp-p.

MΩ

ºC

D.C. Voltage

Rating Voltage

A.C. Voltage

Insulation Resistance

Operation Temperature

Storage Temperature

Aging Rate (Fosc)

100

-25

-55

-0.3

10Vdc, 1min

+85

0.3

ºC

From initial value

Visit www.abracon.com for Terms & Conditions of Sale

Revised: 05.07.13

ABRACON IS

ISO9001:2008

CERTIFIED

30332 Esperanza, Rancho Santa Margarita, California92688

tel 949-546-8000 | fax 949-546-8001 | www.abracon.com

LEADED BUILT-IN CAPACITANCE CERAMIC RESONATOR

RoHS/RoHS II Compliant

Pb in ceramic, exemption (7c-I)

AWCR-MD

_|Size Varies _|

TEST CONDITION AND TEST CIRCUIT:

X: Ceramic Resonator

1. Input

2. Ground

3. Output

Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition

(Temp: 25±2°C, Humidity: 65±5% R.H.) is regulated to measure

OPTIONS AND PART IDENTIFICATION

AWCR -

MD - C -

Frequency

Frequency in MHz

Load Capacitance

Packaging

Blank: Bulk

A: AMMO package*

*AMMO package

lead length 13.5mm

Contact ABRACON for

Built-in Capacitance

options if not standard

Packaging:

Bulk: 500pcs/plastic bag

AMMO: 2000pcs/box

Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the prod-

uct will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according

to MSL 1 requirements to maintain solderability.

Visit www.abracon.com for Terms & Conditions of Sale

Revised: 05.07.13

ABRACON IS

ISO9001:2008

CERTIFIED

30332 Esperanza, Rancho Santa Margarita, California92688

tel 949-546-8000 | fax 949-546-8001 | www.abracon.com

LEADED BUILT-IN CAPACITANCE CERAMIC RESONATOR

RoHS/RoHS II Compliant

Pb in ceramic, exemption (7c-I)

AWCR-MD

_|Size Varies _|

OUTLINE DRAWING

Freq. Range: 1.79 ~ 6.00MHz (Low Proﬁle)

Bulk:

AMMO:

Freq. Range: 12.51 ~ 60.00MHz

Bulk:

AMMO:

**: 12.51 ~13.00MHz, 12.0mm max

13.01 ~ 60.00MHz, 10.0mm max

CAUTION

(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as

this will cause damage to the component.

(2) This component is not hermetically sealed. Do not clean or wash the component.

(3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering.

(4) Do not expose the component to open flame.

(5) This specification applies to the functionality of the component as a single unit.

(6) Storage Conditions: If the product is to be stored for a period greater than 1 year after the Delivery Date, it is recommended that

customers confirm the solderability and characteristics for the product prior to use.

(7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high-

reliabil,ity life dependant applications. ContactAbracon Corporation prior to using this product when in doubt.

ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications.

Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component

failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from

Abracon Corporation is required. Please contact Abracon Corporation for more information.

Visit www.abracon.com for Terms & Conditions of Sale

Revised: 05.07.13

ABRACON IS

ISO9001:2008

CERTIFIED

30332 Esperanza, Rancho Santa Margarita, California92688

tel 949-546-8000 | fax 949-546-8001 | www.abracon.com

相关型号：