ACE346NHBNH [ACE]
Low Loss Power Distribution Switch;型号: | ACE346NHBNH |
厂家: | ACE TECHNOLOGY CO., LTD. |
描述: | Low Loss Power Distribution Switch |
文件: | 总4页 (文件大小:286K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ACE346N
Low Loss Power Distribution Switch
Description
ACE346N is an ultra-low RDS(ON) switch with current limiting function to protect the power source from
over current and short circuit conditions.
Features
⚫
⚫
⚫
⚫
⚫
⚫
⚫
⚫
⚫
⚫
Distribution voltages: 2.5V to 5.5V
Over temperature shutdown and automatic retry
Reverse blocking (no body diode)
At shutdown, OUT can be forced higher than IN
Fault flag (OCB) output for over current and fault conditions
Automatic output discharge at shutdown
Built-in soft-start
1.6ms rise time at 3.3Vin condition
RoHS Compliant and Halogen Free
Compact packages minimize board space: SOT-23-5
Absolute Maximum Ratings (Note1)
Parameter
Value
6V
All pins
Power Dissipation, PD@TA=25°C
0.4W
θJA
θJC
250°C/W
130°C/W
150°C
Package Thermal Resistance (Note 2)
Junction Temperature Range
Lead Temperature (Soldering, 10sec.)
Storage Temperature Range
ESD Susceptibility (Note 2)
260°C
-65°C to 150°C
HBM (Human Body Mode)
2kV
MM (Machine Mode)
200V
Note 1: Stresses beyond the “Absolute Maximum Ratings” may cause permanent damage to the device.
These are stress ratings only. Functional operation of the device at these or any other conditions beyond
those indicated in the operational sections of the specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note 2: θJA is measured in the natural convection at TA = 25°C on a low effective single layer thermal
conductivity test board of JEDEC 51-3 thermal measurement standard. Pin 2 of SOT23-5 packages is the
case position for θJC JC measurement.
VER 1.1
1
ACE346N
Low Loss Power Distribution Switch
Recommended Operating Conditions (Note 3)
Parameter
IN
Value
2.5V to5.5V
0V to 5.5V
All other pins
Junction Temperature Range
Ambient Temperature Range
-40°C to 125°C
-40°C to 85°C
Note 3: The device is not guaranteed to function outside its operating conditions.
Ordering information
ACE346N X XX + H
Halogen - free
Pb - free
BN: SOT-23-5
H:Active high
L:Active low
VER 1.1
2
ACE346N
Low Loss Power Distribution Switch
Typical Applications
Block Diagram
VER 1.1
3
ACE346N
Low Loss Power Distribution Switch
Notes
ACE does not assume any responsibility for use as critical components in life support devices or systems
without the express written approval of the president and general counsel of ACE Technology Co., LTD.
As sued herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and shoes failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be reasonably expected to result in
a significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can
be reasonably expected to cause the failure of the life support device or system, or to affect its safety
or effectiveness.
ACE Technology Co., LTD.
http://www.ace-ele.com/
VER 1.1
4
相关型号:
ACE358
The ACE358 consists of two independent high gain, internally frequency compensated operational amplifier. It can be operated from a Single power supply and also split power supplies.
ACE
©2020 ICPDF网 联系我们和版权申明