AD8692 [ADI]
Low Cost, High Performance, CMOS Rail-to-Rail Output Operational Amplifier; 低成本,高性能, CMOS轨到轨输出运算放大器型号: | AD8692 |
厂家: | ADI |
描述: | Low Cost, High Performance, CMOS Rail-to-Rail Output Operational Amplifier |
文件: | 总12页 (文件大小:266K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Low Cost, High Performance, CMOS
Rail-to-Rail Output Operational Amplifier
AD8692
FEATURES
PIN CONFIGURATIONS
Offset voltage: 400 µV typ
Low offset voltage drift: 6 µV/°C maximum
Very low input bias currents: 1 pA maximum
Low noise: 8 nV/√Hz
OUT A
–IN A
+IN A
V–
1
2
3
4
8
7
6
5
V+
AD8692
OUT B
–IN B
+IN B
TOP VIEW
(Not to Scale)
Low distortion: 0.0006%
Wide bandwidth: 10 MHz
Figure 1. 8-Lead MSOP Pin Configuration
Unity gain stable
Single-supply operation: 2.7 V to 6 V
OUT A
–IN A
+IN A
V–
1
2
3
4
8
7
6
5
V+
AD8692
OUT B
–IN B
+IN B
APPLICATIONS
TOP VIEW
(Not to Scale)
Photodiode amplification
Battery-powered instrumentation
Medical instruments
Multipole filters
Figure 2. 8-Lead SOIC Pin Configuration
Sensors
Portable audio devices
GENERAL DESCRIPTION
The AD8692 is a low cost, dual rail-to-rail output, single-supply
amplifier featuring low offset voltage, low input voltage and
current noise, and wide signal bandwidth. The combination of
low offset, low noise, very low input bias currents, and high
speed makes this amplifier useful in a wide variety of applica-
tions. Filters, integrators, photodiode amplifiers, and high
impedance sensors all benefit from the combination of
performance features. Audio and other ac applications benefit
from the wide bandwidth and low distortion.
Applications for this amplifier include PA controls, laser diode
control loops, portable and loop-powered instrumentation,
audio amplification for portable devices, and ASIC input and
output amplifiers.
The AD8692 is specified over the extended industrial tempera-
ture range of −40°C to +125°C. The AD8692 is available in the
micro-SOIC and 8-lead narrow SOIC surface-mount packages.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703
www.analog.com
© 2004 Analog Devices, Inc. All rights reserved.
AD8692
TABLE OF CONTENTS
Electrical Characteristics ................................................................. 3
Typical Performance Characteristics ..............................................6
Outline Dimensions....................................................................... 11
Ordering Guide .......................................................................... 11
Absolute Maximum Ratings............................................................ 5
Thermal Characteristics .............................................................. 5
ESD Caution.................................................................................. 5
REVISION HISTORY
10/04—Revision 0: Initial Version
Rev. 0 | Page 2 of 12
AD8692
ELECTRICAL CHARACTERISTICS
VS = 2.7 V, VCM = VS/2, TA = 25°C, unless otherwise noted.
Table 1.
Parameter
Symbol
Conditions
Min
Typ
0.4
Max Unit
INPUT CHARACTERISTICS
Offset Voltage
VOS
IB
VCM = −0.3 V to +1.6 V
VCM = −0.1 V to +1.6 V; −40°C < TA < +125°C
2.0
3.0
1
mV
mV
pA
Input Bias Current
0.2
−40°C < TA < +85°C
−40°C < TA < +125°C
50
pA
pA
pA
pA
260
0.5
20
Input Offset Current
IOS
0.1
−40°C < TA < +85°C
−40°C < TA < +125°C
75
pA
Input Voltage Range
Common-Mode Rejection Ratio
−0.3
70
+1.6
V
dB
CMRR
VCM = −0.3 V to +1.6 V
90
VCM = −0.1 V to +1.6 V; −40°C < TA < +125°C
RL = 2 kΩ, VO = 0.5 V to 2.2 V
65
90
85
250
1.3
dB
V/mV
µV/°C
Large Signal Voltage Gain
Offset Voltage Drift
AVO
∆VOS/∆T
6.0
OUTPUT CHARACTERISTICS
Output Voltage High
VOH
VOL
IL = 1 mA
−40°C < TA < +125°C
IL = 1 mA
2.64
2.6
2.66
25
V
V
mV
mV
mA
Ω
Output Voltage Low
40
50
−40°C < TA < +125°C
Short-Circuit Current
Closed-Loop Output Impedance
POWER SUPPLY
ISC
ZOUT
20
12
f = 1 MHz, AV = 1
Power-Supply Rejection Ratio
PSRR
ISY
VS = 2.7 V to 5.5 V
−40°C < TA < +125°C
VO = 0 V
80
75
95
95
0.85
dB
dB
mA
mA
Supply Current/Amplifier
0.95
1.2
−40°C < TA < +125°C
DYNAMIC PERFORMANCE
Slew Rate
Settling Time
SR
tS
RL = 2 kΩ
To 0.01%
5
1
V/µs
µs
Gain Bandwidth Product
Phase Margin
Total Harmonic Distortion + Noise
NOISE PERFORMANCE
Voltage Noise
GBP
Øo
THD+N
10
60
0.003
MHz
Degrees
%
G = 1, RL = 600 Ω, f = 1 kHz, VO = 250 mV p-p
en p-p
en
f = 0.1 Hz to 10 Hz
f = 1 kHz
1.6
8
3.0
12
µV p-p
nV/√Hz
nV/√Hz
pA/√Hz
Voltage Noise Density
en
f = 10 kHz
6.5
0.05
Current Noise Density
in
f = 1 kHz
Rev. 0 | Page 3 of 12
AD8692
VS = 5.0 V, VCM = VS/2, TA = 5°C, unless otherwise noted.
Table 2.
A Grade
Typ
Parameter
Symbol
Conditions
Min
Max Unit
INPUT CHARACTERISTICS
Offset Voltage
VOS
IB
VCM = −0.3 V to +3.9 V
VCM = −0.1 V to +3.9 V; −40°C < TA < +125°C
0.4
0.2
2.0
3.0
1
mV
mV
pA
Input Bias Current
−40°C < TA < +85°C
−40°C < TA < +125°C
50
pA
pA
pA
pA
260
0.5
20
Input Offset Current
IOS
0.1
−40°C < TA < +85°C
−40°C < TA < +125°C
75
pA
Input Voltage Range
Common-Mode Rejection Ratio
−0.3
75
+3.9
V
dB
CMRR
VCM = −0.3 V to +3.9 V
95
VCM = −0.1 V to +3.9 V; −40°C < TA < +125°C
VO = 0.5 V to 4.5 V, RL = 2 kΩ, VCM = 0 V
70
250
95
2,000
1.3
dB
V/mV
µV/°C
Large Signal Voltage Gain
Offset Voltage Drift
AVO
6
∆VOS/∆T
OUTPUT CHARACTERISTICS
Output Voltage High
VOH
IL = 1 mA
4.96 4.98
V
IL = 10 mA
−40°C to +125°C
IL = 1 mA
IL = 10 mA
−40°C to +125°C
4.7
4.6
4.78
V
V
Voltage Low
VOL
16.5
165
40
210
290
mV
mV
mV
mA
Ω
Short-Circuit Current
Closed-Loop Output Impedance
POWER SUPPLY
ISC
ZOUT
80
10
f = 1 MHz, AV = 1
Power-Supply Rejection Ratio
PSRR
ISY
VS = 2.7 V to 5.5 V
−40°C < TA < +125°C
VO = 0 V
80
75
95
95
0.95
dB
dB
Supply Current/Amplifier
1.05 mA
−40°C < TA < +125°C
1.3
mA
DYNAMIC PERFORMANCE
Slew Rate
Settling Time
SR
tS
RL = 2 kΩ
To 0.01%
5
1
V/µs
µs
Full Power Bandwidth
Gain Bandwidth Product
Phase Margin
Total Harmonic Distortion + Noise
NOISE PERFORMANCE
Voltage Noise
BWP
GBP
Øo
<1% distortion
360
10
65
kHz
MHz
Degrees
%
THD+N
G = 1, RL = 600 Ω, f = 1 kHz, VO = 1 V p-p
0.0006
en p-p
en
f = 0.1 Hz to 10 Hz
f = 1 kHz
1.6
8
3.0
12
µV p-p
nV/√Hz
nV/√Hz
pA/√Hz
Voltage Noise Density
en
in
f = 10 kHz
f = 1 kHz
6.5
Current Noise Density
0.05
Rev. 0 | Page 4 of 12
AD8692
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 3.
Stresses above those listed under Absolute Maximum Ratings
Parameters
Ratings
may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or
any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Supply Voltage
Input Voltage
Differential Input Voltage
6 V
VSS − 0.3 V to VDD + 0.3 V
6 V
Output Short-Circuit Duration to Gnd1 Observe derating curves
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature Range
(Soldering, 60 s)
−65°C to +150°C
−40°C to +125°C
−65°C to +150°C
300°C
THERMAL CHARACTERISTICS
Table 4.
Package Type
8-Lead MSOP (RM)
8-Lead SOIC (R)
θJA
θJC
45
43
Unit
°C/W
°C/W
210
158
1 θJA is specified for the worst-case conditions, that is, the device soldered in
the circuit board for surface-mount packages.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. 0 | Page 5 of 12
AD8692
TYPICAL PERFORMANCE CHARACTERISTICS
VS = +5 V or 2.5 V.
2.5k
300
250
200
150
100
50
V
V
= 5V
S
V
= 5V AND 2.7V
S
= –0.3V TO +3.9V
CM
2.0k
1.5k
1.0k
500
0
0
–50
–2.0
–1.5
–1.0
–0.5
0
0.5
1.0
1.5
2.0
–40 –30 –20 –10
0
10 20 30 40 50 60 70 80 90 100 110 120
V
(mV)
OS
TEMPERATURE (°C)
Figure 3. Input Offset Voltage Distribution
Figure 6. Input Bias Current vs. Temperature
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
30
25
20
15
10
5
V
V
= 5V AND 2.7V
S
= 2.5V
CM
T
= –40°C TO +125°C
A
0
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0
0
1
2
3
4
5
6
7
T
V
(µV/°C)
OS
V
(V)
C
SY
Figure 4. Input Offset Voltage Drift Distribution
Figure 7. Supply Current vs. Supply Voltage
2.0k
1.6k
1.2k
800
2.5
2.0
1.5
1.0
V
T
= 5V
= 25°C
V
= ±2.5V AND ±1.35V
S
A
S
I
@ ±2.5V
SY
I
@ ±1.35V
SY
400
0
–400
–800
–1.2k
–1.6k
–2.0k
0.5
0
–0.3
0
0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 3.3 3.6 3.9
COMMON-MODE VOLTAGE (V)
–40
–20
0
20
40
60
80
100
120
140
TEMPERATURE (°C)
Figure 5. Input Offset Voltage vs. Common-Mode Voltage
Figure 8. Supply Current vs. Temperature
Rev. 0 | Page 6 of 12
AD8692
10k
1k
100
80
60
40
20
V
R
C
= ±2.5V, ±1.35V
= 2kΩ
SY
L
L
= 15pF
SOURCE
SINK
100
10
90
45
0
0
–20
–40
1
–45
–90
0.1
0.001
1k
10k
100k
1M
10M
0.01
0.1
1
10
100
FREQUENCY (Hz)
LOAD CURRENT (mA)
Figure 12. Open-Loop Gain and Phase vs. Frequency
Figure 9. Output Voltage to Supply Rail vs. Load Current
35
30
25
20
15
10
5
120
100
80
V
= 5V
V
= 5V AND 2.7V
S
S
V
– V
@ 1mA
DD
OH
60
V
@ 1mA
OL
40
20
0
0
–40
1k
10k
100k
FREQUENCY (Hz)
1M
10M
–20
0
20
40
60
80
C)
100
120
140
TEMPERATURE (
°
Figure 10. Output Voltage Swing vs. Temperature
(IL = 1 mA)
Figure 13. CMRR vs. Frequency
350
300
250
200
150
100
50
120
100
80
V
= 5V
V
= 5V AND 2.7V
S
S
V
– V
@ 10mA
DD
OH
60
V
@ 10mA
OL
40
20
0
0
–40
10
100
1k
10k
100k
1M
10M
–20
0
20
40
60
80
C)
100
120
140
FREQUENCY (Hz)
TEMPERATURE (
°
Figure 11. Output Voltage Swing vs. Temperature
(IL = 10 mA)
Figure 14. PSRR vs. Frequency
Rev. 0 | Page 7 of 12
AD8692
10k
1k
V
= ±2.5V
V
= 5V
= 200pF
= ∞
S
S
C
R
A
L
L
V
= 1
A
= 100
100
10
V
A
= 10
V
1
A
= 1
V
0.1
0.01
0.001
0.0001
100
1k
10k
100k
1M
10M
FREQUENCY (Hz)
TIME (400nV/DIV)
Figure 15. Closed-Loop Output Impedance vs. Frequency
Figure 18. Large Signal Transient Response
40
35
30
25
20
15
10
5
V
R
A
= 5V AND 2.7V
= ∞
= 1
S
V
A
= ±2.5V
= –50
S
L
V
V
0
–2.5
100
0
0
1
10
100
1k
LOAD CAPACITANCE (pF)
TIME (400ns/DIV)
Figure 16. Small Signal Overshoot vs. Load Capacitance
Figure 19. Positive Overload Recovery
V
= ±2.5V, ±1.35V
= 10kΩ
= 200pF
= 1
S
V
A
= ±2.5V
= –50
S
R
C
A
L
L
V
V
2.5
0
0
–100
TIME (200ns/DIV)
TIME (400ns/DIV)
Figure 17. Small Signal Transient Response
Figure 20. Negative Overload Recovery
Rev. 0 | Page 8 of 12
AD8692
1k
0.1
0.01
V
= ±2.5V AND ±1.35V
V
A
V
=
= 1
±
2.5V
S
S
V
= 1V p-p
IN
BW = 20kHz
100
R
= 600Ω
L
R
= 1k
Ω
L
10
0.001
R
= 100kΩ
L
1
0.0001
1
10
100
FREQUENCY (Hz)
1k
10k
20
100
1k
10k 20k
FREQUENCY (Hz)
Figure 21. THD + N vs. Frequency
Figure 23. Voltage Noise Density
150
140
130
120
110
+2.5V
R1
V
= 5V AND 2.7V
S
10kΩ
V+
A
V–
R2
100Ω
V
IN
V–
28mV p-p
B
V
OUT
V+
–2.5V
100
90
80
1k
10k
100k
FREQUENCY (Hz)
1M
10M
TIME (1s/DIV)
Figure 22. 0.1 Hz to 10 Hz Input Voltage Noise
Figure 24. Channel Separation
Rev. 0 | Page 9 of 12
AD8692
VS = +2.7 V or 1.35 V.
1.2k
60
50
40
30
20
10
0
V
V
= 2.7V
S
V
= 2.7V
S
= –0.3V TO +1.6V
CM
1.0k
800
600
400
200
0
V
– V @ 1mA
OH
DD
V
@ 1mA
OL
–2.0
–1.5
–1.0
–0.5
0
0.5
1.0
1.5
2.0
–40
–20
0
20
40
60
80
100
120
140
V
(mV)
OS
TEMPERATURE (°C)
Figure 28. Output Voltage Swing vs. Temperature
Figure 25. Input Offset Voltage Distribution
2.0k
1.6k
1.2k
800
V
= 2.7V
= 200pF
= ∞
S
V
T
= 2.7V
= 25°C
C
R
A
S
A
L
L
V
= 1
400
0
–400
–800
–1.2k
–1.6k
–2.0k
–0.3
0
0.3
0.6
0.9
1.2
1.5 1.6
TIME (400ns/DIV)
COMMON-MODE VOLTAGE (V)
Figure 29. Large Signal Transient Response
Figure 26. Input Offset Voltage vs. Common-Mode Voltage
10k
1k
V
= 2.7V
S
SOURCE
100
10
SINK
1
0.1
0.001
0.01
0.1
1
10
100
LOAD CURRENT (mA)
Figure 27. Output Voltage to Supply Rail vs. Load Current
Rev. 0 | Page 10 of 12
AD8692
OUTLINE DIMENSIONS
3.00
BSC
8
5
4
4.90
BSC
3.00
BSC
PIN 1
0.65 BSC
1.10 MAX
0.15
0.00
0.80
0.60
0.40
8°
0°
0.38
0.22
0.23
0.08
COPLANARITY
0.10
SEATING
PLANE
COMPLIANT TO JEDEC STANDARDS MO-187AA
Figure 30. 8-Lead Mini Small Outline Package [MSOP]
(RM-8)
Dimensions shown in millimeters
5.00 (0.1968)
4.80 (0.1890)
8
1
5
4
6.20 (0.2440)
5.80 (0.2284)
4.00 (0.1574)
3.80 (0.1497)
1.27 (0.0500)
BSC
0.50 (0.0196)
0.25 (0.0099)
× 45°
1.75 (0.0688)
1.35 (0.0532)
0.25 (0.0098)
0.10 (0.0040)
8°
0.51 (0.0201)
0.31 (0.0122)
0° 1.27 (0.0500)
COPLANARITY
0.10
0.25 (0.0098)
0.17 (0.0067)
SEATING
PLANE
0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-012AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
Figure 31. 8-Lead Standard Small Outline Package [SOIC]
(R-8)
Dimensions shown in millimeters and (inches)
ORDERING GUIDE
Model
Temperature Range
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
Package Description
Package Option
Branding
AD8692ARMZ-R21
AD8692ARMZ-REEL1
AD8692ARZ1
AD8692ARZ-REEL1
AD8692ARZ-REEL71
8-Lead MSOP
8-Lead MSOP
8-Lead SOIC
8-Lead SOIC
8-Lead SOIC
RM-8
RM-8
R-8
R-8
R-8
APA
APA
1 Z = Pb-free part.
Rev. 0 | Page 11 of 12
AD8692
NOTES
©
2004 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D04991–0–10/04(0)
Rev. 0 | Page 12 of 12
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明