AD8694ARZ-REEL [ADI]

Low Cost, Low Noise, CMOS Rail-to-Rail Output Operational Amplifiers; 低成本,低噪声, CMOS轨到轨输出运算放大器
AD8694ARZ-REEL
型号: AD8694ARZ-REEL
厂家: ADI    ADI
描述:

Low Cost, Low Noise, CMOS Rail-to-Rail Output Operational Amplifiers
低成本,低噪声, CMOS轨到轨输出运算放大器

运算放大器 放大器电路 光电二极管
文件: 总12页 (文件大小:634K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Low Cost, Low Noise, CMOS Rail-to-Rail  
Output Operational Amplifiers  
AD8691/AD8692/AD8694  
FEATURES  
PIN CONFIGURATIONS  
Offset voltage: 400 µV typ  
AD8691  
OUT  
V–  
1
2
3
5
3
V+  
OUT A  
V–  
1
2
3
5
V+  
Low offset voltage drift: 6 µV/°C max (AD8692/AD8694)  
Very low input bias currents: 1 pA max  
Low noise: 8 nV/Hz  
AD8691  
TOP VIEW  
(Not to Scale)  
+IN  
–IN  
+IN A  
4
–IN  
Low distortion: 0.0006%  
Wide bandwidth: 10 MHz  
Unity-gain stable  
Figure 1. 5-Lead TSOT  
Figure 2. 5-Lead SC70  
Single-supply operation: 2.7 V to 6 V  
OUT A  
–IN A  
+IN A  
V–  
1
2
3
4
8
7
6
5
V+  
OUT A  
–IN A  
+IN A  
V–  
1
2
3
4
8
7
6
5
V+  
AD8692  
AD8692  
OUT B  
–IN B  
+IN B  
OUT B  
–IN B  
+IN B  
APPLICATIONS  
TOP VIEW  
TOP VIEW  
(Not to Scale)  
(Not to Scale)  
Photodiode amplification  
Battery-powered instrumentation  
Medical instruments  
Multipole filters  
Sensors  
Portable audio devices  
Figure 3. 8-Lead MSOP  
Figure 4. 8-Lead SOIC  
1
OUT A  
– IN A  
+IN A  
V+  
14  
13  
12  
11  
OUT D  
–IN D  
+IN D  
V–  
2
3
4
5
6
7
OUT A  
– IN A  
+IN A  
V+  
1
2
3
4
5
6
7
14 OUT D  
13 –IN D  
12 +IN D  
11 V–  
AD8694  
TOP VIEW  
(Not to Scale)  
AD8694  
TOP VIEW  
(Not to Scale)  
+IN B  
–IN B  
OUT B  
10 +IN C  
+IN B  
–IN B  
OUT B  
10 +IN C  
9
8
–IN C  
9
8
–IN C  
OUT C  
OUT C  
Figure 5. 14-Lead SOIC  
Figure 6. 14-Lead TSSOP  
GENERAL DESCRIPTION  
Applications for these amplifiers include PA controls, laser  
diode control loops, portable and loop-powered instrumentation,  
audio amplification for portable devices, and ASIC input and  
output amplifiers.  
The AD8691, AD8692, and AD8694 are low cost, single, dual,  
and quad rail-to-rail output, single-supply amplifiers featuring  
low offset and input voltages, low current noise, and wide signal  
bandwidth. The combination of low offset, low noise, very low  
input bias currents, and high speed make these amplifiers useful  
in a wide variety of applications. Filters, integrators, photodiode  
amplifiers, and high impedance sensors all benefit from this  
combination of performance features. Audio and other ac  
applications benefit from the wide bandwidth and low  
distortion of these devices.  
The small SC70 and TSOT package options for the AD8691  
allow it to be placed next to sensors, thereby reducing external  
noise pickup.  
The AD8691, AD8692, and AD8694 are specified over the  
extended industrial temperature range of −40°C to +125°C. The  
AD8691 single is available in 5-lead SC70 and TSOT packages.  
The AD8692 dual is available in 8-lead MSOP and narrow SOIC  
surface-mount packages. The AD8694 quad is available in  
14-lead TSSOP and narrow 14-lead SOIC packages.  
Rev. B  
Information furnished by Analog Devices is believed to be accurate and reliable.  
However, no responsibility is assumed by Analog Devices for its use, nor for any  
infringements of patents or other rights of third parties that may result from its use.  
Specifications subject to change without notice. No license is granted by implication  
or otherwise under any patent or patent rights of Analog Devices. Trademarks and  
registered trademarks are the property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
© 2005 Analog Devices, Inc. All rights reserved.  
AD8691/AD8692/AD8694  
TABLE OF CONTENTS  
Electrical Characteristics................................................................. 3  
Typical Performance Characteristics ..............................................6  
Outline Dimensions....................................................................... 11  
Ordering Guide .......................................................................... 12  
Absolute Maximum Ratings............................................................ 5  
Thermal Characteristics .............................................................. 5  
ESD Caution.................................................................................. 5  
REVISION HISTORY  
3/05—Rev. A to Rev. B  
Added AD8694 ...................................................................Universal  
1/05—Rev. 0 to Rev. A  
Added AD8691 ...................................................................Universal  
Changes to Features.......................................................................... 1  
Added Figure 1 and Figure 2........................................................... 1  
Changes to Electrical Characteristics ............................................ 3  
Changes to Figure 6 caption............................................................ 6  
Changes to Figure 9.......................................................................... 6  
Updated Outline Dimensions....................................................... 11  
Changes to Ordering Guide .......................................................... 11  
10/04—Revision 0: Initial Version  
Rev. 0 | Page 2 of 12  
AD8691/AD8692/AD8694  
ELECTRICAL CHARACTERISTICS  
VS = 2.7 V, VCM = VS/2, TA = 25°C, unless otherwise noted.  
Table 1.  
Parameter  
Symbol  
Conditions  
Min  
Typ  
0.4  
Max Unit  
INPUT CHARACTERISTICS  
Offset Voltage  
VOS  
IB  
VCM = −0.3 V to +1.6 V  
VCM = −0.1 V to +1.6 V; −40°C < TA < +125°C  
2.0  
3.0  
1
mV  
mV  
pA  
Input Bias Current  
0.2  
−40°C < TA < +85°C  
−40°C < TA < +125°C  
50  
pA  
pA  
pA  
pA  
260  
0.5  
20  
Input Offset Current  
IOS  
0.1  
−40°C < TA < +85°C  
−40°C < TA < +125°C  
75  
pA  
Input Voltage Range  
Common-Mode Rejection Ratio  
−0.3  
68  
60  
90  
60  
+1.6  
V
dB  
dB  
V/mV  
V/mV  
CMRR  
AVO  
VCM = −0.3 V to +1.6 V  
90  
85  
250  
VCM = −0.1 V to +1.6 V; −40°C < TA < +125°C  
RL = 2 kΩ, VO = 0.5 V to 2.2 V  
RL = 2 kΩ, VO = 0.5 V to 2.2 V  
Large Signal Voltage Gain  
AD8694  
Offset Voltage Drift  
∆VOS/∆T  
AD8691  
AD8692/AD8694  
2
1.3  
12  
6
µV/°C  
µV/°C  
INPUT CAPACITANCE  
Common-Mode Input Capacitance  
Differential Input Capacitance  
OUTPUT CHARACTERISTICS  
Output Voltage High  
CCM  
CDM  
5
2.5  
pF  
pF  
VOH  
VOL  
IL = 1 mA  
−40°C < TA < +125°C  
IL = 1 mA  
2.64  
2.6  
2.66  
25  
V
V
mV  
mV  
mA  
Output Voltage Low  
40  
60  
−40°C < TA < +125°C  
Short-Circuit Current  
Closed-Loop Output Impedance  
POWER SUPPLY  
ISC  
ZOUT  
20  
12  
f = 1 MHz, AV = 1  
Power Supply Rejection Ratio  
PSRR  
ISY  
VS = 2.7 V to 5.5 V  
−40°C < TA < +125°C  
VO = 0 V  
80  
75  
95  
95  
0.85  
dB  
dB  
mA  
mA  
Supply Current/Amplifier  
0.95  
1.2  
−40°C < TA < +125°C  
DYNAMIC PERFORMANCE  
Slew Rate  
Settling Time  
SR  
tS  
RL = 2 kΩ  
To 0.01%  
5
1
V/µs  
µs  
Gain Bandwidth Product  
Phase Margin  
Total Harmonic Distortion + Noise  
GBP  
ØO  
THD + N  
10  
60  
0.003  
MHz  
Degrees  
%
G = 1, RL = 600 , f = 1 kHz, VO = 250 mV p-p  
NOISE PERFORMANCE  
Voltage Noise  
Voltage Noise Density  
en p-p  
en  
en  
f = 0.1 Hz to 10 Hz  
f = 1 kHz  
f = 10 kHz  
1.6  
8
6.5  
0.05  
3.0  
12  
µV p-p  
nV/√Hz  
nV/√Hz  
pA/√Hz  
Current Noise Density  
in  
f = 1 kHz  
Rev. 0 | Page 3 of 12  
 
AD8691/AD8692/AD8694  
VS = 5.0 V, VCM = VS/2, TA = 5°C, unless otherwise noted.  
Table 2.  
A Grade  
Typ  
Parameter  
Symbol  
Conditions  
Min  
Max Unit  
INPUT CHARACTERISTICS  
Offset Voltage  
VOS  
IB  
VCM = −0.3 V to +3.9 V  
VCM = −0.1 V to +3.9 V; −40°C < TA < +125°C  
0.4  
0.2  
2.0  
3.0  
1
mV  
mV  
pA  
Input Bias Current  
−40°C < TA < +85°C  
−40°C < TA < +125°C  
50  
pA  
pA  
pA  
pA  
260  
0.5  
20  
Input Offset Current  
IOS  
0.1  
−40°C < TA < +85°C  
−40°C < TA < +125°C  
75  
pA  
Input Voltage Range  
+3.9  
V
0.3  
70  
67  
250  
150  
Common-Mode Rejection Ratio  
CMRR  
AVO  
VCM = −0.3 V to +3.9 V  
95  
95  
2000  
dB  
dB  
V/mV  
V/mV  
VCM = −0.1 V to +3.9 V; −40°C < TA < +125°C  
VO = 0.5 V to 4.5 V, RL = 2 kΩ, VCM = 0 V  
VO = 0.5 V to 4.5 V, RL = 2 kΩ, VCM = 0 V  
Large Signal Voltage Gain  
AD8694  
Offset Voltage Drift  
AD8691  
AD8692/AD8694  
INPUT CAPACITANCE  
VOS/T  
2
1.3  
12  
6
µV/°C  
µV/°C  
Common-Mode Input Capacitance CCM  
5
2.5  
pF  
pF  
Differential Input Capacitance  
OUTPUT CHARACTERISTICS  
Output Voltage High  
CDM  
VOH  
IL = 1 mA  
4.96 4.98  
V
IL = 10 mA  
−40°C to +125°C  
IL = 1 mA  
4.7  
4.6  
4.78  
V
V
Voltage Low  
AD8691/AD8692  
AD8694  
AD8691/AD8692  
AD8694  
Short-Circuit Current  
Closed-Loop Output Impedance  
POWER SUPPLY  
VOL  
20  
40  
mV  
mV  
mV  
mV  
mV  
mA  
IL = 10 mA  
IL = 10 mA  
−40°C to +125°C  
−40°C to +125°C  
165  
185  
210  
240  
290  
370  
ISC  
ZOUT  
80  
10  
f = 1 MHz, AV = 1  
Power Supply Rejection Ratio  
PSRR  
ISY  
VS = 2.7 V to 5.5 V  
−40°C < TA < +125°C  
VO = 0 V  
80  
75  
95  
95  
0.95  
dB  
dB  
Supply Current/Amplifier  
1.05 mA  
−40°C < TA < +125°C  
1.3  
mA  
DYNAMIC PERFORMANCE  
Slew Rate  
Settling Time  
SR  
tS  
RL = 2 kΩ  
To 0.01%  
5
1
V/µs  
µs  
Full Power Bandwidth  
Gain Bandwidth Product  
Phase Margin  
BWP  
GBP  
ØO  
<1% distortion  
360  
10  
65  
kHz  
MHz  
Degrees  
%
Total Harmonic Distortion + Noise  
THD + N  
0.0006  
G = 1, RL = 600 , f = 1 kHz, VO = 1 V p-p  
NOISE PERFORMANCE  
Voltage Noise  
Voltage Noise Density  
en p-p  
en  
f = 0.1 Hz to 10 Hz  
f = 1 kHz  
1.6  
8
3.0  
12  
µV p-p  
nV/Hz  
nV/Hz  
pA/Hz  
en  
f = 10 kHz  
6.5  
0.05  
Current Noise Density  
in  
f = 1 kHz  
Rev. 0 | Page 4 of 12  
AD8691/AD8692/AD8694  
ABSOLUTE MAXIMUM RATINGS  
TA = 25°C, unless otherwise noted.  
Table 3.  
Parameters  
Stresses above those listed under Absolute Maximum Ratings  
may cause permanent damage to the device. This is a stress  
rating only; functional operation of the device at these or any  
other conditions above those indicated in the operational  
section of this specification is not implied. Exposure to absolute  
maximum rating conditions for extended periods may affect  
device reliability.  
Ratings  
Supply Voltage  
Input Voltage  
Differential Input Voltage  
Output Short-Circuit Duration  
to GND  
Storage Temperature Range  
Operating Temperature Range  
Junction Temperature Range  
6 V  
VSS − 0.3 V to VDD + 0.3 V  
6 V  
Observe derating curves  
−65°C to +150°C  
−40°C to +125°C  
−65°C to +150°C  
THERMAL CHARACTERISTICS  
Lead Temperature Range  
(Soldering, 60 sec)  
Table 4.  
Package Type  
300°C  
1
θJA  
θJC  
45  
43  
61  
126  
35  
36  
Unit  
°C/W  
°C/W  
°C/W  
°C/W  
°C/W  
°C/W  
8-Lead MSOP (RM)  
8-Lead SOIC (R)  
5-Lead TSOT (UJ-5)  
5-Lead SC70 (KS)  
14-Lead TSSOP (RU)  
14-Lead SOIC (R)  
210  
158  
207  
376  
180  
120  
1 θJA is specified for the worst-case conditions, that is, the device soldered in  
the circuit board for surface-mount packages.  
ESD CAUTION  
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on  
the human body and test equipment and can discharge without detection. Although this product features  
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy  
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance  
degradation or loss of functionality.  
Rev. 0 | Page 5 of 12  
 
AD8691/AD8692/AD8694  
TYPICAL PERFORMANCE CHARACTERISTICS  
VS = +5 V or 2.5 V, unless otherwise noted.  
2.5k  
300  
250  
200  
150  
100  
50  
V
V
= 5V  
S
V
= 5V AND 2.7V  
S
= –0.3V TO +3.9V  
CM  
2.0k  
1.5k  
1.0k  
500  
0
0
–50  
–2.0  
–1.5  
–1.0  
–0.5  
0
0.5  
1.0  
1.5  
2.0  
–40 –30 –20 –10  
0
10 20 30 40 50 60 70 80 90 100 110 120  
V
(mV)  
OS  
TEMPERATURE (°C)  
Figure 7. Input Offset Voltage Distribution  
Figure 10. Input Bias Current vs. Temperature  
1.0  
0.8  
0.6  
0.4  
0.2  
0
30  
25  
20  
15  
10  
5
V
V
= 5V AND 2.7V  
S
= 2.5V  
CM  
T
= –40°C TO +125°C  
A
0
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0  
(µV/°C)  
0
1
2
3
4
5
6
7
T
V
OS  
V
(V)  
C
SY  
Figure 8. AD8692/AD8694 Input Offset Voltage Drift Distribution  
Figure 11. Supply Current vs. Supply Voltage  
2.0k  
1.6k  
1.2k  
800  
2.5  
V
T
= 5V  
= 25°C  
V
= ±2.5V AND ±1.35V  
S
S
I
@
I
±
2.5V  
SY  
A
2.0  
1.5  
1.0  
@ ±1.35V  
SY  
400  
0
–400  
–800  
–1.2k  
–1.6k  
–2.0k  
0.5  
0
–0.3  
0
0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 3.3 3.6 3.9  
COMMON-MODE VOLTAGE (V)  
–40  
–20  
0
20  
40  
60  
80  
C)  
100  
120  
140  
TEMPERATURE (  
°
Figure 12. Supply Current vs. Temperature  
Figure 9. Input Offset Voltage vs. Common-Mode Voltage  
Rev. 0 | Page 6 of 12  
 
AD8691/AD8692/AD8694  
10k  
1k  
100  
80  
60  
40  
20  
V
R
C
= ±2.5V, ±1.35V  
= 2kΩ  
SY  
V
= 5V  
S
L
L
= 15pF  
100  
10  
90  
45  
AD8691_92 SINK  
AD8694 SINK  
0
0
–20  
–40  
AD8691_92 SOURCE  
1
–45  
AD8694 SOURCE  
–90  
0.1  
0.001  
1k  
10k  
100k  
1M  
10M  
0.01  
0.1  
1
10  
100  
FREQUENCY (Hz)  
LOAD CURRENT (mA)  
Figure 16. Open-Loop Gain and Phase vs. Frequency  
Figure 13. Output Voltage to Supply Rail vs. Load Current  
35  
30  
25  
20  
15  
10  
5
120  
100  
80  
V
= 5V  
S
V
= 5V AND 2.7V  
S
AD8691_92 (V -V  
DD OH  
)
AD8694 (V -V  
DD OH  
)
AD8691_92 (V  
)
OL  
60  
AD8694 (V  
)
OL  
40  
20  
0
0
–40  
–20  
0
20  
40  
60  
80  
100  
120  
1k  
10k  
100k  
FREQUENCY (Hz)  
1M  
10M  
TEMPERATURE (  
°
C)  
Figure 14. Output Voltage Swing vs. Temperature (IL = 1 mA)  
Figure 17. CMRR vs. Frequency  
350  
300  
250  
200  
150  
100  
50  
120  
100  
80  
V
= 5V  
S
V
= 5V AND 2.7V  
AD8691_92 (V -V  
DD OH  
)
S
AD8694 (V -V  
DD OH  
)
AD8691_92 (V  
)
OL  
60  
AD8694 (V  
)
OL  
40  
20  
0
0
–40  
–20  
0
20  
40  
60  
80  
100  
120  
10  
100  
1k  
10k  
100k  
1M  
10M  
TEMPERATURE (  
°
C)  
FREQUENCY (Hz)  
Figure 15. Output Voltage Swing vs. Temperature (IL = 10 mA)  
Figure 18. PSRR vs. Frequency  
Rev. 0 | Page 7 of 12  
AD8691/AD8692/AD8694  
10k  
1k  
V
= ±2.5V  
V
= 5V  
= 200pF  
= ∞  
S
S
C
R
A
L
L
V
= 1  
A
= 100  
V
100  
10  
A
= 10  
V
1
A
= 1  
V
0.1  
0.01  
0.001  
0.0001  
100  
1k  
10k  
100k  
1M  
10M  
FREQUENCY (Hz)  
TIME (400ns/DIV)  
Figure 19. Closed-Loop Output Impedance vs. Frequency  
Figure 22. Large Signal Transient Response  
40  
35  
30  
25  
20  
15  
10  
5
V
R
A
= 5V AND 2.7V  
= ∞  
= 1  
S
V
A
= ±2.5V  
= –50  
S
L
V
V
0
–2.5  
100  
0
0
1
10  
100  
1k  
LOAD CAPACITANCE (pF)  
TIME (400ns/DIV)  
Figure 20. Small Signal Overshoot vs. Load Capacitance  
Figure 23. Positive Overload Recovery  
V
= ±2.5V, ±1.35V  
= 10kΩ  
= 200pF  
= 1  
S
V
A
= ±2.5V  
= –50  
S
R
C
A
L
L
V
V
2.5  
0
0
–100  
TIME (400ns/DIV)  
TIME (200ns/DIV)  
Figure 24. Negative Overload Recovery  
Figure 21. Small Signal Transient Response  
Rev. 0 | Page 8 of 12  
AD8691/AD8692/AD8694  
1k  
0.1  
0.01  
V
= ±2.5V AND ±1.35V  
V
A
= ±2.5V  
= 1  
= 1V p-p  
S
S
V
V
IN  
BW = 20kHz  
100  
R
= 600Ω  
L
R
= 1kΩ  
L
10  
0.001  
R
= 100kΩ  
L
1
0.0001  
1
10  
100  
FREQUENCY (Hz)  
1k  
10k  
20  
100  
1k  
FREQUENCY (Hz)  
10k 20k  
Figure 25. THD + N vs. Frequency  
Figure 27. Voltage Noise Density  
150  
140  
130  
120  
110  
+2.5V  
R1  
V
= 5V AND 2.7V  
S
10kΩ  
V+  
A
V–  
R2  
100Ω  
V
IN  
28mV p-p  
V–  
B
V
OUT  
V+  
–2.5V  
100  
90  
80  
1k  
10k  
100k  
FREQUENCY (Hz)  
1M  
10M  
TIME (1s/DIV)  
Figure 26. 0.1 Hz to 10 Hz Input Voltage Noise  
Figure 28. AD8692/AD8694 Channel Separation  
Rev. 0 | Page 9 of 12  
AD8691/AD8692/AD8694  
VS = +2.7 V or 1.35 V, unless otherwise noted.  
1.2k  
60  
50  
40  
V
V
= 2.7V  
S
V
= 2.7V  
S
= –0.3V TO +1.6V  
CM  
AD8691_92 (V -V  
DD OH  
)
1.0k  
800  
600  
400  
200  
0
AD8694 (V -V  
DD OH  
)
30  
20  
AD8691_92 (V  
)
OL  
AD8694 (V  
)
OL  
10  
0
–2.0  
–1.5  
–1.0  
–0.5  
0
0.5  
1.0  
1.5  
2.0  
–40  
–20  
0
20  
40  
60  
80  
100  
120  
V
(mV)  
OS  
TEMPERATURE (°C)  
Figure 32. Output Voltage Swing vs. Temperature (IL = 1 mA)  
Figure 29. Input Offset Voltage Distribution  
2.0k  
1.6k  
1.2k  
800  
V
= 2.7V  
= 200pF  
= ∞  
S
V
T
= 2.7V  
= 25°C  
C
R
A
S
A
L
L
V
= 1  
400  
0
–400  
–800  
–1.2k  
–1.6k  
–2.0k  
–0.3  
0
0.3  
0.6  
0.9  
1.2  
1.5 1.6  
TIME (400ns/DIV)  
COMMON-MODE VOLTAGE (V)  
Figure 33. Large Signal Transient Response  
Figure 30. Input Offset Voltage vs. Common-Mode Voltage  
10k  
1k  
V
= 2.7V  
S
100  
10  
AD8691_92 SINK  
AD8694 SINK  
AD8691_92 SOURCE  
1
AD8694 SOURCE  
0.1  
0.001  
0.01  
0.1  
1
10  
LOAD CURRENT (mA)  
Figure 31. Output Voltage to Supply Rail vs. Load Current  
Rev. 0 | Page 10 of 12  
AD8691/AD8692/AD8694  
OUTLINE DIMENSIONS  
2.90 BSC  
3.00  
BSC  
5
1
4
3
2.80 BSC  
0.95 BSC  
1.60 BSC  
2
8
1
5
4
4.90  
BSC  
3.00  
BSC  
PIN 1  
1.90  
BSC  
*
0.90  
0.87  
0.84  
PIN 1  
0.65 BSC  
*
1.00 MAX  
0.20  
0.08  
1.10 MAX  
0.15  
0.00  
8°  
4°  
0°  
0.80  
0.60  
0.40  
8°  
0°  
0.10 MAX  
0.38  
0.22  
0.60  
0.45  
0.30  
0.50  
0.30  
0.23  
0.08  
SEATING  
PLANE  
COPLANARITY  
0.10  
SEATING  
PLANE  
*
COMPLIANT TO JEDEC STANDARDS MO-193-AB WITH  
THE EXCEPTION OF PACKAGE HEIGHT AND THICKNESS.  
COMPLIANT TO JEDEC STANDARDS MO-187-AA  
Figure 34. 8-Lead Mini Small Outline Package [MSOP]  
(RM-8)  
Figure 37. 5-Lead Thin Small Outline Transistor Package [TSOT]  
(UJ-5)  
Dimensions shown in millimeters  
Dimensions shown in millimeters  
2.20  
2.00  
1.80  
8.75 (0.3445)  
8.55 (0.3366)  
14  
1
8
7
4.00 (0.1575)  
3.80 (0.1496)  
6.20 (0.2441)  
5.80 (0.2283)  
1.35  
1.25  
1.15  
2.40  
2.10  
1.80  
5
1
4
3
2
1.27 (0.0500)  
BSC  
PIN 1  
1.00  
0.90  
0.70  
0.50 (0.0197)  
0.25 (0.0098)  
1.75 (0.0689)  
1.35 (0.0531)  
× 45°  
0.65 BSC  
0.25 (0.0098)  
0.10 (0.0039)  
0.40  
0.10  
1.10  
0.80  
8°  
0°  
0.51 (0.0201)  
0.31 (0.0122)  
SEATING  
1.27 (0.0500)  
0.40 (0.0157)  
COPLANARITY  
0.10  
0.25 (0.0098)  
0.17 (0.0067)  
PLANE  
0.30  
0.10  
0.30  
0.15  
0.22  
0.08  
0.10 M  
AX  
SEATING  
PLANE  
COMPLIANT TO JEDEC STANDARDS MS-012-AB  
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS  
0.10 COPLANARITY  
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR  
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN  
COMPLIANT TO JEDEC STANDARDS MO-203AA  
Figure 35. 5-Lead Thin Shrink Small Outline Package [SC70]  
Figure 38. 14-Lead Standard Small Outline Package [SOIC]  
Narrow Body (R-14)  
(KS-5)  
Dimensions shown in millimeters  
Dimensions shown in millimeters  
5.10  
5.00  
4.90  
5.00 (0.1968)  
4.80 (0.1890)  
8
1
5
4
14  
8
7
6.20 (0.2440)  
5.80 (0.2284)  
4.00 (0.1574)  
3.80 (0.1497)  
4.50  
4.40  
4.30  
6.40  
BSC  
1.27 (0.0500)  
BSC  
0.50 (0.0196)  
0.25 (0.0099)  
1
× 45°  
1.75 (0.0688)  
1.35 (0.0532)  
PIN 1  
0.25 (0.0098)  
0.10 (0.0040)  
0.65  
BSC  
1.05  
1.00  
0.80  
8°  
0.51 (0.0201)  
0.31 (0.0122)  
0.20  
0.09  
0° 1.27 (0.0500)  
1.20  
MAX  
COPLANARITY  
0.10  
0.25 (0.0098)  
0.17 (0.0067)  
SEATING  
PLANE  
0.75  
0.60  
0.45  
0.40 (0.0157)  
8°  
0°  
0.15  
0.05  
0.30  
0.19  
SEATING  
PLANE  
COMPLIANT TO JEDEC STANDARDS MS-012-AA  
COPLANARITY  
0.10  
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS  
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR  
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN  
COMPLIANT TO JEDEC STANDARDS MO-153AB-1  
Figure 39. 14-Lead Thin Shrink Small Outline Package [TSSOP]  
(RU-14)  
Figure 36. 8-Lead Standard Small Outline Package [SOIC]  
Narrow Body (R-8)  
Dimensions shown in millimeters  
Dimensions shown in millimeters and (inches)  
Rev. 0 | Page 11 of 12  
 
AD8691/AD8692/AD8694  
ORDERING GUIDE  
Model  
Temperature Range  
Package Description  
5-Lead TSOT  
5-Lead TSOT  
5-Lead TSOT  
5-Lead SC70  
5-Lead SC70  
5-Lead SC70  
8-Lead MSOP  
8-Lead MSOP  
8-Lead SOIC  
Package Option  
UJ-5  
UJ-5  
UJ-5  
KS-5  
Branding  
ACA  
ACA  
ACA  
ACA  
AD8691AUJZ-R2  
1
−40°C to +125°C  
−40°C to +125°C  
−40°C to +125°C  
−40°C to +125°C  
−40°C to +125°C  
−40°C to +125°C  
−40°C to +125°C  
−40°C to +125°C  
−40°C to +125°C  
−40°C to +125°C  
−40°C to +125°C  
−40°C to +125°C  
−40°C to +125°C  
−40°C to +125°C  
−40°C to +125°C  
−40°C to +125°C  
AD8691AUJZ-REEL  
AD8691AUJZ-REEL7  
AD8691AKSZ-R2  
AD8691AKSZ-REEL  
1
1
1
1
KS-5  
KS-5  
ACA  
ACA  
AD8691AKSZ-REEL7  
AD8692ARMZ-R21  
1
RM-8  
RM-8  
R-8  
R-8  
R-8  
APA  
APA  
AD8692ARMZ-REEL  
AD8692ARZ  
AD8692ARZ-REEL  
AD8692ARZ-REEL7  
AD8694ARUZ  
AD8694ARUZ-REEL  
AD8694ARZ  
AD8694ARZ-REEL  
1
1
1
8-Lead SOIC  
8-Lead SOIC  
1
1
14-Lead TSSOP  
14-Lead TSSOP  
14-Lead SOIC  
14-Lead SOIC  
14-Lead SOIC  
RU-14  
RU-14  
R-14  
R-14  
R-14  
1
1
1
AD8694ARZ-REEL7  
1
1 Z = Pb-free part.  
©
2005 Analog Devices, Inc. All rights reserved. Trademarks and  
registered trademarks are the property of their respective owners.  
D04991–0–3/05(B)  
Rev. 0 | Page 12 of 12  
 
 
 
 

相关型号:

AD8694ARZ-REEL7

Low Cost, Low Noise, CMOS Rail-to-Rail Output Operational Amplifiers
ADI

AD8694WAC-P3

Low Cost, Low Noise, CMOS Rail-to-Rail Output Quad Op Amp
ADI

AD8694WAC-P7

Low Cost, Low Noise, CMOS Rail-to-Rail Output Quad Op Amp
ADI

AD8694WARUZ

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers
ADI

AD8694WARUZ-REEL

Low Cost, Low Noise, CMOS, RRO Operational Amplifiers
ADI

AD8698

Dual Precision, Rail-to-Rail Output Operational Amplifier
ADI

AD8698AR

Dual Precision, Rail-to-Rail Output Operational Amplifier
ADI

AD8698AR

DUAL OP-AMP, 300 uV OFFSET-MAX, 1 MHz BAND WIDTH, PDSO8, MS-012AA, SOIC-8
ROCHESTER

AD8698AR-REEL

Dual Precision, Rail-to-Rail Output Operational Amplifier
ADI

AD8698AR-REEL7

Dual Precision, Rail-to-Rail Output Operational Amplifier
ADI

AD8698ARM-R2

Dual Precision, Rail-to-Rail Output Operational Amplifier
ADI

AD8698ARM-R2

DUAL OP-AMP, 300 uV OFFSET-MAX, 1 MHz BAND WIDTH, PDSO8, MO-187AA, MSOP-8
ROCHESTER