AD9398/PCB [ADI]
HDMI⑩ Display Interface; HDMI ™显示器接口型号: | AD9398/PCB |
厂家: | ADI |
描述: | HDMI⑩ Display Interface |
文件: | 总44页 (文件大小:914K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HDMI™ Display Interface
AD9398
FEATURES
FUNCTIONAL BLOCK DIAGRAM
HDMI interface
Supports high bandwidth digital content protection
RGB to YCbCr 2-way color conversion
1.8 V/3.3 V power supply
R/G/B 8 × 3
SCL
SDA
SERIAL REGISTER
YCbCr (4:2:2
OR 4:4:4)
AND
POWER MANAGEMENT
2
DATACK
100-lead, Pb-free LQFP
HSOUT
RGB and YCbCr output formats
Digital video interface
HDMI 1.1, DVI 1.0
VSOUT
R/G/B 8 × 3
OR YCbCr
Rx0+
Rx0–
2
DATACK
Rx1+
150 MHz HDMI receiver
Supports high bandwidth digital content protection
(HDCP 1.1)
HSYNC
Rx1–
VSYNC
HDMI
Rx2+
RECEIVER
DE
Rx2–
DE
Digital audio interface
RxC+
RxC–
RTERM
S/PDIF OUT
8-CHANNEL
HDMI 1.1-compatible audio interface
SPDIF (IEC90658-compatible) digital audio output
Multichannel I2S audio output (up to 8 channels)
2
I S
MCLK
LRCLK
APPLICATIONS
MCL
MDA
Advanced TVs
HDTVs
Projectors
LCD monitors
HDCP
DDCSCL
DDCSDA
AD9398
Figure 1.
GENERAL DESCRIPTION
The AD9398 offers a high definition multimedia interface
(HDMI) receiver integrated on a single chip. Also included is
support for high bandwidth digital content protection (HDCP).
The AD9398 contains a HDMI 1.0-compatible receiver and
supports all HDTV formats (up to 1080p) and display resolu-
tions up to SXGA (1280 × 1024 @ 75 Hz). The receiver features
an intrapair skew tolerance of up to one full clock cycle. With
the inclusion of HDCP, displays can now receive encrypted
video content. The AD9398 allows for authentication of a video
receiver, decryption of encoded data at the receiver, and
renewability of that authentication during transmission as
specified by the HDCP 1.1 protocol.
Fabricated in an advanced CMOS process, the AD9398 is
provided in a space-saving 100-lead, surface-mount, Pb-free,
plastic LQFP and is specified over the 0°C to 70°C temperature
range.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
© 2005 Analog Devices, Inc. All rights reserved.
AD9398
TABLE OF CONTENTS
Features .............................................................................................. 1
4:4:4 to 4:2:2 Filter...................................................................... 11
Audio PLL Setup......................................................................... 12
Audio Board Level Muting........................................................ 13
Output Data Formats................................................................. 13
2-Wire Serial Register Map ........................................................... 14
2-Wire Serial Control Register Details ........................................ 25
Chip Identification..................................................................... 25
BT656 Generation...................................................................... 27
Macrovision................................................................................. 28
Color Space Conversion............................................................ 29
2-Wire Serial Control Port............................................................ 36
Data Transfer via Serial Interface............................................. 36
Serial Interface Read/Write Examples..................................... 37
PCB Layout Recommendations.................................................... 38
Power Supply Bypassing............................................................ 38
Outputs (Both Data and Clocks).............................................. 38
Digital Inputs .............................................................................. 38
Color Space Converter (CSC) Common Settings...................... 39
Outline Dimensions....................................................................... 41
Ordering Guide .......................................................................... 41
Applications....................................................................................... 1
Functional Block Diagram .............................................................. 1
General Description......................................................................... 1
Specifications..................................................................................... 3
Electrical Characteristics............................................................. 3
Digital Interface Electrical Characteristics ............................... 3
Absolute Maximum Ratings............................................................ 5
Explanation of Test Levels........................................................... 5
ESD Caution.................................................................................. 5
Pin Configuration and Function Descriptions............................. 6
Design Guide..................................................................................... 9
General Description..................................................................... 9
Digital Inputs ................................................................................ 9
Serial Control Port ....................................................................... 9
Output Signal Handling............................................................... 9
Power Management...................................................................... 9
Timing.......................................................................................... 10
VSYNC Filter and Odd/Even Fields ........................................ 10
HDMI Receiver........................................................................... 10
DE Generator .............................................................................. 10
REVISION HISTORY
10/05—Revision 0: Initial Version
Rev. 0 | Page 2 of 44
AD9398
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
VDD, VD = 3.3 V, DVDD = PVDD = 1.8 V, ADC clock = maximum.
Table 1.
AD9398KSTZ-100
Typ
AD9398KSTZ-150
Typ
Parameter
Temp
Test Level
Min
Max
Min
Max
Unit
DIGITAL INPUTS (5 V TOLERANT)
Input Voltage, High (VIH)
Input Voltage, Low (VIL)
Input Current, High (IIH)
Input Current, Low (IIL)
Input Capacitance
Full
Full
Full
Full
25°C
VI
VI
V
V
V
2.6
2.6
V
V
μA
μA
pF
0.8
0.8
−82
82
3
−82
82
3
DIGITAL OUTPUTS
Output Voltage, High (VOH)
Output Voltage, Low (VOL)
Duty Cycle, DATACK
Full
Full
Full
VI
VI
V
VDD − 0.1
45
VDD − 0.1
45
V
V
%
0.4
55
0.4
55
50
50
Output Coding
Binary
Binary
THERMAL CHARACTERISTICS
θJA Junction-to-Ambient
V
35
35
°C/W
DIGITAL INTERFACE ELECTRICAL CHARACTERISTICS
VDD = VD =3.3 V, DVDD = PVDD = 1.8 V, ADC clock = maximum.
Table 2.
AD9398KSTZ-100
AD9398KSTZ-150
Parameter
Test Level Conditions
Min
Typ Max
Min Typ Max Unit
RESOLUTION
8
8
Bit
DC DIGITAL I/O SPECIFICATIONS
High-Level Input Voltage (VIH)
Low-Level Input Voltage (VIL)
High-Level Output Voltage (VOH)
Low-Level Output Voltage (VOL)
DC SPECIFICATIONS
Output High Level
(IOHD) (VOUT = VOH)
Output Low Level
IOLD, (VOUT = VOL)
DATACK High Level
VOHC, (VOUT = VOH)
VI
VI
VI
VI
2.5
2.5
V
V
V
V
0.8
0.8
0.1
VDD − 0.1
VDD − 0.1
0.1
IV
IV
IV
IV
IV
IV
IV
IV
IV
Output drive = high
36
24
12
8
40
20
30
15
36
24
12
8
40
20
30
15
mA
mA
mA
mA
mA
mA
mA
mA
mV
Output drive = low
Output drive = high
Output drive = low
Output drive = high
Output drive = low
Output drive = high
Output drive = low
DATACK Low Level
VOLC, (VOUT = VOL)
Differential Input Voltage, Single-
Ended Amplitude
75
700
75
700
Rev. 0 | Page 3 of 44
AD9398
AD9398KSTZ-100
Typ Max
AD9398KSTZ-150
Min Typ Max Unit
Parameter
Test Level Conditions
Min
POWER SUPPLY
VD Supply Voltage
VDD Supply Voltage
IV
IV
IV
IV
V
3.15
1.7
1.7
3.3
3.3
1.8
1.8
80
3.47
347
1.9
3.15 3.3
3.47
347
1.9
1.9
110
V
V
V
V
1.7
1.7
1.7
3.3
1.8
1.8
80
DVDD Supply Voltage
PVDD Supply Voltage
IVD Supply Current (Typical Pattern)1
IVDD Supply Current (Typical Pattern)2
1.7
1.9
100
1003
110
mA
V
V
40
88
55
1751 mA
IDVDD Supply Current (Typical Pattern)1,
110 145
mA
4
IPVDD Supply Current (Typical Pattern)
Power-Down Supply Current (IPD)
AC SPECIFICATIONS
V
VI
26
130
35
30
130
40
mA
mA
Intrapair (+ to −) Differential Input
IV
IV
360
6
ps
Skew (TDPS
Channel to Channel Differential Input
Skew (TCCS
Low-to-High Transition Time for Data
and Controls (DLHT
)
Clock
period
ps
)
IV
IV
IV
IV
IV
IV
IV
IV
Output drive = high;
CL = 10 pF
Output drive = low;
CL = 5 pF
Output drive = high;
CL = 10 pF
Output drive = low;
CL = 5 pF
Output drive = high;
CL = 10 pF
Output drive = low;
CL = 5 pF
Output drive = high;
CL = 10 pF
900
)
1300 ps
650 ps
1200 ps
850 ps
1250 ps
800 ps
1200 ps
Low-to-High Transition Time for
DATACK (DLHT
)
High-to-Low Transition Time for Data
and Controls (DHLT
)
High-to-Low Transition Time for
DATACK (DHLT
)
Output drive = low;
CL = 5 pF
Clock-to-Data Skew5 (TSKEW
Duty Cycle, DATACK
DATACK Frequency (FCIP)
)
IV
IV
VI
−0.5
45
20
2.0
−0.5
2.0
55
150
ns
%
MHz
50
1 The typical pattern contains a gray scale area, output drive = high. Worst-case pattern is alternating black and white pixels.
2 The typical pattern contains a gray scale area, output drive = high.
3 Specified current and power values with a worst-case pattern (on/off).
4 DATACK load = 10 pF, data load = 5 pF.
5 Drive strength = high.
Rev. 0 | Page 4 of 44
AD9398
ABSOLUTE MAXIMUM RATINGS
Table 3.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Parameter
Rating
VD
3.6 V
VDD
3.6 V
DVDD
1.98 V
PVDD
1.98 V
Analog Inputs
Digital Inputs
VD to 0.0 V
5 V to 0.0 V
20 mA
−25°C to +85°C
−65°C to +150°C
150°C
EXPLANATION OF TEST LEVELS
Table 4.
Level Test
Digital Output Current
Operating Temperature Range
Storage Temperature Range
Maximum Junction Temperature
Maximum Case Temperature
I
100% production tested.
II
100% production tested at 25°C and sample tested at
specified temperatures.
150°C
III
Sample tested only.
IV
Parameter is guaranteed by design and characterization
testing.
V
Parameter is a typical value only.
VI
100% production tested at 25°C; guaranteed by design
and characterization testing.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. 0 | Page 5 of 44
AD9398
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
1
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
GND
NC
GND
PIN 1
2
3
GREEN 7
GREEN 6
GREEN 5
GREEN 4
GREEN 3
GREEN 2
GREEN 1
GREEN 0
NC
4
V
D
5
NC
6
NC
7
GND
NC
8
9
V
D
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
V
NC
AD9398
DD
TOP VIEW
GND
BLUE 7
BLUE 6
BLUE 5
BLUE 4
BLUE 3
BLUE 2
BLUE 1
BLUE 0
MCLKIN
MCLKOUT
SCLK
GND
GND
GND
GND
GND
GND
(Not to Scale)
PV
DD
GND
FILT
PV
DD
GND
PV
DD
LRCLK
GND
MDA
MCL
2
I S3
2
I S2
NC = NO CONNECT
Figure 2. Pin Configuration
Table 5. Complete Pinout List
Pin Type
Pin No.
81
Mnemonic Function
Value
3.3 V CMOS
TMDS
TMDS
TMDS
TMDS
TMDS
TMDS
TMDS
TMDS
VDD
INPUTS
PWRDN
Rx0+
Power-Down Control
DIGITAL VIDEO DATA INPUTS
35
34
38
37
41
40
Digital Input Channel 0 True
Rx0−
Rx1+
Digital Input Channel 0 Complement
Digital Input Channel 1 True
Rx1−
Rx2+
Digital Input Channel 1 Complement
Digital Input Channel 2 True
Rx2−
Digital Input Channel 2 Complement
Digital Data Clock True
DIGITAL VIDEO CLOCK INPUTS 43
44
RxC+
RxC−
Digital Data Clock Complement
Outputs of Red Converter, Bit 7 is MSB
OUTPUTS
92 to 99
RED [7:0]
2 to 9
12 to 19
89
87
85
GREEN [7:0] Outputs of Green Converter, Bit 7 is MSB
VDD
VDD
VDD
VDD
VDD
VDD
BLUE [7:0]
DATACK
HSOUT
VSOUT
FIELD
Outputs of Blue Converter, Bit 7 is MSB
Data Output Clock
HSYNC Output Clock (Phase-Aligned with DATACK)
VSYNC Output Clock (Phase-Aligned with DATACK)
Odd/Even Field Output
84
REFERENCES
57
FILT
Connection for External Filter Components For audio
PLL
PVDD
Rev. 0 | Page 6 of 44
AD9398
Pin Type
Pin No.
Mnemonic Function
Value
3.3 V
1.8 V to 3.3 V
1.8 V
1.8 V
0 V
POWER SUPPLY
80, 76, 72, 67, 45, 33 VD
Analog Power Supply and DVI Terminators
Output Power Supply
100, 90, 10
59, 56, 54
48, 32, 30
VDD
PVDD
PLL Power Supply
DVDD
GND
Digital Logic Power Supply
Ground
CONTROL
HDCP
83
82
49
50
51
52
28
27
26
25
24
20
21
22
23
88
46
SDA
SCL
Serial Port Data I/O
Serial Port Data Clock
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
3.3 V CMOS
VDD
VDD
VDD
VDD
VDD
DDCSCL
DDCSDA
MCL
HDCP Slave Serial Port Data Clock
HDCP Slave Serial Port Data I/O
HDCP Master Serial Port Data Clock
HDCP Master Serial Port Data I/O
S/PDIF Digital Audio Output
I2S Audio (Channel 1, Channel 2)
I2S Audio (Channel 3, Channel 4)
I2S Audio (Channel 5, Channel 6)
I2S Audio (Channel 7, Channel 8)
External Reference Audio Clock In
Audio Master Clock Output
Audio Serial Clock Output
MDA
S/PDIF
I2S0
AUDIO DATA OUTPUTS
I2S1
I2S2
I2S3
MCLKIN
MCLKOUT
SCLK
LRCLK
DE
VDD
VDD
VDD
VDD
Data Output Clock for Left and Right Audio Channels
Data Enable
DATA ENABLE
RTERM
3.3 V CMOS
500 Ω
RTERM
Sets Internal Termination Resistance
Table 6. Pin Function Descriptions
Mnemonic
INPUTS
Rx0+
Description
Digital Input Channel 0 True.
Rx0−
Rx1+
Digital Input Channel 0 Complement.
Digital Input Channel 1 True.
Rx1−
Rx2+
Digital Input Channel 1 Complement.
Digital Input Channel 2 True.
Rx2−
Digital input Channel 2 Complement.
These six pins receive three pairs of transition minimized differential signaling (TMDS) pixel data (at 10× the pixel
rate) from a digital graphics transmitter.
RxC+
RxC−
Digital Data Clock True.
Digital Data Clock Complement.
This clock pair receives a TMDS clock at 1× pixel data rate.
External Filter Connection.
FILT
For proper operation, the audio-clock generator PLL requires an external filter. Connect the filter shown in Figure 8
to this pin. For optimal performance, minimize noise and parasitics on this node. For more information see the
PCB Layout Recommendations section .
PWRDN
Power-Down Control/Three-State Control.
The function of this pin is programmable via Register 0x26 [2:1].
OUTPUTS
HSOUT
Horizontal Sync Output.
A reconstructed and phase-aligned version of the HSYNC input. Both the polarity and duration of this output can
be programmed via serial bus registers. By maintaining alignment with DATACK and DATA, data timing with
respect to horizontal sync can always be determined.
VSOUT
Vertical Sync Output.
The separated VSYNC from a composite signal or a direct pass through of the VSYNC signal. The polarity of this
output can be controlled via the serial bus bit (Register 0x24 [6]).
O/E FIELD
DE
Odd/Even Field Bit for Interlaced Video. This output identifies whether the current field (in an interlaced signal) is
odd or even. The polarity of this signal is programmable via Register 0x24[4].
Data Enable that defines valid video. Can be received in the signal or generated by the AD9398.
Rev. 0 | Page 7 of 44
AD9398
Mnemonic
Description
RTERM
RTERM is the termination resistor used to drive the AD9398 internally to a precise 50 Ω termination for TMDS lines.
This should be a 500 Ω 1% tolerance resistor.
AUDIO DATA OUTPUT
S/PDIF
Sony/Philips Digital Interface. Supports digital audio from 32 kbps to 192 kbps.
Inter-IC Sound Channel 0 through Channel 3. Each line supports two channels of digital audio.
Master Audio Clock External. Used if internal MCLK is not generated.
Master Audio Clock Output to Drive Audio DACs.
I2S0 to I2S3
MCLKIN
MCLKOUT
SCLK
Serial Clock Out to support Digital Audio.
LRCLK
Data Output Clock for Left and Right Audio Channels.
SERIAL PORT
SDA
SCL
Serial Port Data I/O for Programming AD9398 Registers—I2C Address is 0x98.
Serial Port Data Clock for Programming AD9398 Registers.
DDCSDA
DDCSCL
MDA
Serial Port Data I/O for HDCP Communications to Transmitter—I2C Address is 0x74 or 0x76.
Serial Port Data Clock for HDCP Communications to Transmitter.
Serial Port Data I/O to EEPROM with HDCP Keys—I2C Address is 0xA0.
Serial Port Data Clock to EEPROM with HDCP Keys.
MCL
DATA OUTPUTS
RED [7:0]
GREEN [7:0]
BLUE [7:0]
Data Output, Red Channel.
Data Output, Green Channel.
Data Output, Blue Channel.
The main data outputs. Bit 7 is the MSB. The delay from pixel sampling time to output is fixed, but is different if the
color space converter is used. When the sampling time is changed by adjusting the phase register, the output
timing is shifted as well. The DATACK and HSOUT outputs are also moved, so the timing relationship among the
signals is maintained.
DATA CLOCK OUTPUT
DATACK
Data Clock Output.
This is the main clock output signal used to strobe the output data and HSOUT into external logic. Four possible
output clocks can be selected with Register 0x25 [7:6]. These are related to the pixel clock (1/2× pixel clock,
1× pixel clock, 2× frequency pixel clock, and a 90° phase shifted pixel clock). They are produced either by the
internal PLL clock generator or EXTCLK and are synchronous with the pixel sampling clock. The polarity of DATACK
can also be inverted via Register 0x24 [0]. The sampling time of the internal pixel clock can be changed by
adjusting the phase register. When this is changed, the pixel-related DATACK timing is shifted as well. The DATA,
DATACK, and HSOUT outputs are all moved, so the timing relationship among the signals is maintained.
POWER SUPPLY1
VD (3.3 V)
Analog Power Supply.
These pins supply power to the ADCs and terminators. They should be as quiet and filtered as possible.
Digital Output Power Supply.
VDD (1.8 V to 3.3 V)
A large number of output pins (up to 27) switching at high speed (up to 150 MHz) generates many power supply
transients (noise). These supply pins are identified separately from the VD pins, so output noise transferred into the
sensitive analog circuitry can be minimized. If the AD9398 is interfacing with lower voltage logic, VDD may be
connected to a lower supply voltage (as low as 1.8 V) for compatibility.
PVDD (1.8 V)
Clock Generator Power Supply.
The most sensitive portion of the AD9398 is the clock generation circuitry. These pins provide power to the clock
PLL and help the user design for optimal performance. The designer should provide quiet, noise-free power to
these pins.
DVDD (1.8 V)
GND
Digital Input Power Supply.
This supplies power to the digital logic.
Ground.
The ground return for all circuitry on chip. It is recommended that the AD9398 be assembled on a single solid
ground plane, with careful attention to ground current paths.
1 The supplies should be sequenced such that VD and VDD are never less than 300 mV below DVDD. At no time should DVDD be more than 300 mV greater than VD or VDD
.
Rev. 0 | Page 8 of 44
AD9398
DESIGN GUIDE
GENERAL DESCRIPTION
SERIAL CONTROL PORT
The AD9398 is a fully integrated solution for receiving
DVI/HDMI signals and is capable of decoding HDCP-
encrypted signals through connections to an external
EEPROM. The circuit is ideal for providing an interface for
HDTV monitors or as the front end to high performance video
scan converters.
The serial control port is designed for 3.3 V logic. However, it is
tolerant of 5 V logic signals.
OUTPUT SIGNAL HANDLING
The digital outputs operate from 1.8 V to 3.3 V (VDD).
POWER MANAGEMENT
Implemented in a high performance CMOS process, the
interface can capture signals with pixel rates of up to 150 MHz.
The AD9398 uses the activity detect circuits, the active interface
bits in the serial bus, the active interface override bits, the
power-down bit, and the power-down pin to determine the
correct power state. There are four power states: full power, seek
mode, auto power-down, and power-down. Table 7 summarizes
how the AD9398 determines the power mode to use and which
circuitry is powered on/off in each of these modes. The power-
down command has priority and then the automatic circuitry.
The power-down pin (Pin 81—polarity set by Register 0x26[3])
can drive the chip into four power-down options. Bit 2 and Bit 1
of Register 0x26 control these four options. Bit 0 controls
whether the chip is powered down or the outputs are placed in
high impedance mode (with the exception of SOG). Bit 7 to
Bit 4 of Register 0x26 control whether the outputs, SOG, Sony
Philips digital interface (SPDIF ) or Inter-IC sound bus (I2S or
IIS) outputs are in high impedance mode. See the 2-Wire Serial
Control Register Detail section for the details.
The AD9398 includes all necessary circuitry for decoding
TMDS signaling including those encrypted with HDCP.
Included in the output formatting is a color space converter
(CSC), which accommodates any input color space and can
output any color space. All controls are programmable via a 2-
wire serial interface. Full integration of these sensitive mixed
signal functions makes system design straight-forward and less
sensitive to the physical and electrical environments.
DIGITAL INPUTS
The digital control inputs (I2C) on the AD9398 operate to 3.3 V
CMOS levels. In addition, all digital inputs, except the TMDS
(HDMI/DVI) inputs, are 5 V tolerant (applying 5 V to them
does not cause damage.) The TMDS input pairs (Rx0+/Rx0−,
Rx1+/Rx1−, Rx2+/Rx2−, and RxC+/RxC−) must maintain a
100 Ω differential impedance (through proper PCB layout)
from the connector to the input where they are internally
terminated (50 Ω to 3.3 V). If additional ESD protection is
desired, use of a California Micro Devices (CMD) CM1213
(among others) series low capacitance ESD protection offers 8
kV of protection to the HDMI TMDS lines.
Table 7. Power-Down Mode Descriptions
Inputs
Sync Detect2
Mode
Power-Down1
Auto PD Enable3 Power-On or Comments
Full Power
Seek Mode
Seek Mode
Power-Down
1
1
1
0
1
0
0
X
X
0
1
Everything
Everything
Serial bus, sync activity detect, SOG, band gap reference
Serial bus, sync activity detect, SOG, band gap reference
1 Power-down is controlled via Bit 0 in Serial Bus Register 0x26.
2 Sync detect is determined by OR’ing Bit 7 to Bit 2 in Serial Bus Register 0x15.
3 Auto power-down is controlled via Bit 7 in Serial Bus Register 0x27.
Rev. 0 | Page 9 of 44
AD9398
SYNC SEPARATOR THRESHOLD
TIMING
The output data clock signal is created so that its rising edge
always occurs between data transitions and can be used to latch
the output data externally.
FIELD 1
FIELD 0
FIELD 1
FIELD 0
QUADRANT
HSIN
2
3
4
1
2
3
4
1
VSIN
VSOUT
Figure 3 shows the timing operation of the AD9398.
tPER
O/E FIELD
tDCYCLE
ODD FIELD
DATACK
Figure 5. VSYNC Filter—Odd
HDMI RECEIVER
tSKEW
The HDMI receiver section of the AD9398 allows the reception
of a digital video stream, which is backward compatible with
DVI and able to accommodate not only video of various for-
mats (RGB, YCrCb 4:4:4, 4:2:2), but also up to eight channels of
audio. Infoframes are transmitted carrying information about
the video format, audio clocks, and many other items necessary
for a monitor to use fully the information stream available.
DATA
HSOUT
Figure 3. Output Timing
VSYNC FILTER AND ODD/EVEN FIELDS
The VSYNC filter is used to eliminate spurious VSYNCs, maintain
a consistent timing relationship between the VSYNC and
HSYNC output signals, and generate the odd/even field output.
The earlier digital visual interface (DVI) format was restricted
to an RGB 24-bit color space only. Embedded in this data
stream were HSYNCs, VSYNCs, and display enable (DE)
signals, but no audio information. The HDMI specification
allows transmission of all the DVI capabilities, but adds several
YCrCb formats that make the inclusion of a programmable
color space converter (CSC) a very desirable feature. With this,
the scaler following the AD9398 can specify that it always
wishes to receive a particular format—for instance, 4:2:2 YCrCb—
regardless of the transmitted mode. If RGB is sent, the CSC can
easily convert that to 4:2:2 YCrCb while relieving the scaler of
this task.
The filter works by examining the placement of VSYNC
with respect to HSYNC and, if necessary, slightly shifting
it in time at the VSOUT output. The goal is to keep the
VSYNC and HSYNC leading edges from switching at the
same time, eliminating confusion as to when the first line
of a frame occurs. Enabling the VSYNC filter is done with
Register 0x21[5]. Use of the VSYNC filter is recommended for
all cases, including interlaced video, and is required when using
the HSYNC per VSYNC counter. Figure 4 and Figure 5
illustrate even/odd field determination in two situations.
SYNC SEPARATOR THRESHOLD
In addition, the HDMI specification supports the transmission
of up to eight channels of S/PDIF or I2S audio. The audio
information is packetized and transmitted during the video
blanking periods along with specific information about the
clock frequency. Part of this audio information (audio
infoframe) tells the user how many channels of audio are being
transmitted, where they should be placed, information
regarding the source (make, model), and other data.
FIELD 1
FIELD 0
FIELD 1
FIELD 0
QUADRANT
HSIN
2
3
4
1
2
3
4
1
VSIN
VSOUT
O/E FIELD
DE GENERATOR
EVEN FIELD
The AD9398 has an on-board generator for DE, for start of
active video (SAV), and for end of active video (EAV), all of
which are necessary for describing the complete data stream for
a BT656-compatible output. In addition to this particular
output, it is possible to generate the DE for cases in which a
scaler is not used. This signal alerts the following circuitry as to
which are displayable video pixels.
Figure 4. VSYNC Filter—Even
Rev. 0 | Page 10 of 44
AD9398
4:4:4 TO 4:2:2 FILTER
The AD9398 contains a filter that allows it to convert a signal
from YCrCb 4:4:4 to YCrCb 4:2:2 while maintaining the
maximum accuracy and fidelity of the original signal.
One of the three channels is represented in Figure 6. In each
processing channel, the three inputs are multiplied by three
separate coefficients marked a1, a2, and a3. These coefficients
are divided by 4096 to obtain nominal values ranging from
−0.9998 to +0.9998. The variable labeled a4 is used as an offset
control. The CSC_Mode setting is the same for all three
processing channels. This multiplies all coefficients and offsets
Input Color Space to Output Color Space
The AD9398 can accept a wide variety of input formats and
either retain that format or convert to another. Input formats
supported are:
by a factor of 2CSC_Mode
.
•
•
•
4:4:4 YCrCb 8-bit
The functional diagram for a single channel of the CSC, as
shown in Figure 6, is repeated for the remaining G and B
channels. The coefficients for these channels are b1, b2, b3, b4,
c1, c2, c3, and c4.
4:2:2 YCrCb 8-, 10-, and 12-bit
RGB 8-bit
Output modes supported are:
CSC_Mode[1:0]
a4[12:0]
+
a1[12:0]
•
•
•
4:4:4 YCrCb 8-bit
×4
×2
2
1
0
1
4096
4:2:2 YCrCb 8-, 10-, and 12-bit
Dual 4:2:2 YCrCb 8-bit
R
G
B
[11:0]
[11:0]
[11:0]
×
×
×
×
+
+
IN
IN
IN
R
[11:0]
OUT
a2[12:0]
Color Space Conversion (CSC) Matrix
1
4096
×
The CSC matrix in the AD9398 consists of three identical
processing channels. In each channel, three input values are
multiplied by three separate coefficients. Also included are an
offset value for each row of the matrix and a scaling multiple for
all values. Each value has a 13-bit, twos complement resolution
to ensure the signal integrity is maintained. The CSC is
designed to run at speeds up to 150 MHz, supporting
resolutions up to 1080p at 60 Hz. With any-to-any color space
support, formats such as RGB, YUV, YCbCr, and others are
supported by the CSC.
a3[12:0]
1
4096
×
Figure 6. Single CSC Channel
A programming example and register settings for several
common conversions are listed in the Color Space Converter
(CSC) Common Settings section.
For a detailed functional description and more programming
examples, refer to Application Note AN-795, AD9880 Color
Space Converter User's Guide.
The main inputs, RIN, GIN, and BIN come from the 8- to 12-bit
inputs from each channel. These inputs are based on the input
format detailed in Table 10. The mapping of these inputs to the
CSC inputs is shown in Table 8.
Table 8. CSC Port Mapping
Input Channel
CSC Input Channel
R/CR
Gr/Y
B/CB
RIN
GIN
BIN
Rev. 0 | Page 11 of 44
AD9398
In order to provide the most flexibility in configuring the audio
sampling clock, an additional PLL is employed. The PLL
characteristics are determined by the loop filter design, the PLL
charge pump current, and the VCO range setting. The loop
filter design is shown in Figure 8.
AUDIO PLL SETUP
Data contained in the audio infoframes, among other registers,
define for the AD9398 HDMI receiver not only the type of
audio, but the sampling frequency (fS). The audio infoframe also
contains information about the N and CTS values used to
recreate the clock. With this information, it is possible to
regenerate the audio sampling frequency. The audio clock is
regenerated by dividing the 20-bit CTS value into the TMDS
clock, then multiplying by the 20-bit N value. This yields a
multiple of the sampling frequency of either 128 × fS or 256 × fS.
It is possible for this to be specified up to 1024 × fS.
PV
D
C
C
Z
P
8nF
80nF
R
Z
1.5kΩ
FILT
Figure 8. PLL Loop Filter Detail
SOURCE DEVICE
SINK DEVICE
To fully support all audio modes for all video resolutions up
to 1080p, it is necessary to adjust certain audio-related
registers from their power-on default values. Table 9
describes these registers and gives the recommended
settings.
1
CTS
DIVIDE
BY
N
CYCLE
TIME
COUNTER
128 × f
S
128 × f
MULTIPLY
DIVIDE
BY
S
TMDS
VIDEO
CLOCK
BY
N
CLOCK
CTS
1
N
REGISTER
N
N
1
N AND CTS VALUES ARE TRANSMITTED USING THE
AUDIO CLOCK REGENERATION PACKET. VIDEO
CLOCK IS TRANSMITTED ON TMDS CLOCK CHANNEL.
Figure 7. N and CTS for Audio Clock
Table 9. AD9398 Audio Register Settings
Recommended
Register Bits Setting
Function
Comments
0x01
0x02
0x03
7:0
7:4
7:6
5:3
2
0x00
0x40
01
010
1
PLL Divisor (MSBs)
PLL Divisor (LSBs)
VCO Range
Charge Pump Current
PLL Enable
The analog video PLL is also used for the audio clock circuit when in
HDMI mode. This is done automatically.
In HDMI mode, this bit enables a lower frequency to be used for
audio MCLK generation.
0x34
0x58
4
0
Audio Frequency Mode
Override
Allows the chip to determine the low frequency mode of the audio
PLL.
7
1
PLL Enable
This enables the analog PLL to be used for audio MCLK generation.
6:4
011
MCLK PLL Divisor
When the analog PLL is enabled for MCLK generation, another
frequency divider is provided. These bits set the divisor to 4.
3
0
N/CTS Disable
The N and CTS values should always be enabled.
2:0
0**
MCLK Sampling Frequency
000 = 128 × fS
001 = 256 × fS
010 = 384 × fS
011 = 512 × fS
Rev. 0 | Page 12 of 44
AD9398
AUDIO BOARD LEVEL MUTING
The audio can be muted through the infoframes or locally
via the serial bus registers. This can be controlled with
Register R0x57, Bits [7:4].
This information is the fundamental difference between DVI
and HDMI transmissions and is located in read-only registers
R0x5A to R0xEE. In addition to this information, registers are
provided to indicate that new information has been received.
Registers with addresses ending in 0xX7 or 0xXF beginning at
R0x87 contain the new data flag (NDF) information. These
registers contain the same information and all are reset once
any of them are read. Although there is no external interrupt
signal, it is very easy for the user to read any of these registers to
see if there is new information to be processed.
AVI Infoframes
The HDMI TMDS transmission contains infoframes with
specific information for the monitor such as:
•
Audio information
2 channels to 8 channels of audio identified
•
•
•
Audio coding
OUTPUT DATA FORMATS
Audio sampling frequency
The AD9398 supports 4:4:4, 4:2:2, double data rate (DDR), and
BT656 output formats. Register 0x25[3:0] controls the output
mode. These modes and the pin mapping are listed in Table 10.
•
•
•
•
Speaker placement
N and CTS values (for reconstruction of the audio)
Muting
Source information
•
CD
•
SACD
DVD
•
•
Video information
•
•
•
Video ID code (per CEA861B)
Color space
Aspect ratio
•
•
Horizontal and vertical bar information
MPEG frame information (I, B, or P frame)
•
Vendor (transmitter source) name and product model
Table 10.
Port
Red
7
Green
Blue
Bit
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
4:4:4
Red/Cr [7:0]
Green/Y [7:0]
Y [7:0]
Blue/Cb [7:0]
DDR 4:2:2 ↑ CbCr ↓ Y, Y
4:2:2
CbCr [7:0]
1
4:4:4 DDR
DDR ↑ G [3:0]
DDR ↑ B [7:4]
DDR ↑ B [3:0]
DDR ↓ G [7:4]
DDR 4:2:2 ↑ CbCr [11:0]
DDR 4:2:2 ↓ Y,Y [11:0]
Y [11:0]
DDR ↓ R [7:0]
4:2:2 to 12
CbCr [11:0]
1 Arrows in the table indicate clock edge. Rising edge of clock = ↑, falling edge = ↓.
Rev. 0 | Page 13 of 44
AD9398
2-WIRE SERIAL REGISTER MAP
The AD9398 is initialized and controlled by a set of registers that determines the operating modes. An external controller is employed to
write and read the control registers through the 2-wire serial interface port.
Table 11. Control Register Map
Read/Write
or Read
Default
Hex Address
0x00
Only
Bits Value
Register Name
Description
Read
[7:0] 00000000 Chip Revision
[7:0] 01101001 PLL Divider MSB
Chip revision ID. Revision is read [7:4]. [3:0].
PLL feedback divider value MSB.
PLL feedback divider value.
VCO range.
Charge pump current control for PLL.
This bit enables a lower frequency to be used for audio
MCLK generation.
0x001
Read/Write
Read/Write
Read/Write
0x02
[7:4] 1101****
[7:6] 01******
[5:3] **001***
PLL Divider
VCO Range
Charge Pump
PLL Enable
0x03
[2]
*****0**
0x11
Read/Write
[7]
0*******
HSYNC Source
0 = HSYNC.
1 = SOG.
[6]
*0******
HSYNC Source
Override
0 = auto HSYNC source.
1 = manual HSYNC source.
0 = VSYNC.
1 = VSYNC from SOG.
[5]
[4]
[3]
[2]
**0*****
***0****
****0***
*****0**
VSYNC Source
VSYNC Source Override 0 = auto HSYNC source.
1 = manual HSYNC source.
Channel Select
0 = Channel 0.
1 = Channel 1.
0 = auto-channel select.
Channel Select
Override
1 = manual channel select.
0 = analog interface.
1 = digital interface.
0 = auto-interface select.
1 = manual interface select.
0 = active low.
[1]
[0]
[7]
[6]
******0*
*******0
1*******
*0******
Interface Select
Interface Override
Input HSYNC Polarity
0x12
Read/Write
1 = active high.
0 = auto HSYNC polarity.
HSYNC Polarity
Override
1 = manual HSYNC polarity.
0 = active low.
1 = active high.
[5]
[4]
**1*****
***0****
Input VSYNC Polarity
VSYNC Polarity
Override
0 = auto VSYNC polarity.
1 = manual VSYNC polarity.
MSB of HSYNCs per VSYNC.
0x17
Read
[3:0] ****0000
HSYNCs per VSYNC
MSB
0x18
0x22
0x23
Read
[7:0] 00000000 HSYNCs per VSYNC
HSYNCs per VSYNC count.
VSYNC duration.
Read/Write
Read/Write
[7:0]
4
VSYNC Duration
HSYNC Duration
[7:0] 32
HSYNC duration. Sets the duration of the output HSYNC
in pixel clocks.
0x24
Read/Write
[7]
[6]
1*******
HSYNC Output Polarity Output HSYNC polarity.
0 = active low out.
1 = active high out.
*1******
VSYNC Output Polarity
Output VSYNC polarity
0 = active low out.
1 = active high out.
Rev. 0 | Page 14 of 44
AD9398
Read/Write
or Read
Only
Default
Bits Value
Hex Address
Register Name
Description
[5]
[4]
[0]
**1*****
***1****
*******0
DE Output Polarity
Output DE polarity.
0 = active low out.
1 = active high out.
Output field polarity.
0 = active low out.
1 = active high out.
0 = don’t invert clock out.
1 = invert clock out.
Field Output Polarity
Output CLK Invert
Output CLK Select
0x25
Read/Write
[7:6] 01******
Select which clock to use on output pin. 1× CLK is
divided down from TMDS clock input when pixel
repetition is in use.
00 = ½× CLK.
01 = 1× CLK.
10 = 2× CLK.
11 = 90° phase 1× CLK.
[5:4] **11****
[3:2] ****00**
Output Drive Strength
Output Mode
Set the drive strength of the outputs.
00 = lowest, 11 = highest.
Selects the data output mapping.
00 = 4:4:4 mode (normal).
01 = 4:2:2 + DDR 4:2:2 on blue.
10 = DDR 4:4:4 + DDR 4:2:2 on blue.
11 = 12-bit 4:2:2 (HDMI option only)
[1]
[0]
******1*
*******0
Primary Output Enable Enables primary output.
Secondary Output
Enable
Enables secondary output (DDR 4:2:2 in Output Mode 1
and Mode 2).
0x26
Read/Write
[7]
[5]
[4]
[3]
0*******
**0*****
***0****
****1***
Output Three-State
SPDIF Three-State
I2S Three-State
Power-Down Pin
Polarity
Three-state the outputs.
Three-state the SPDIF output.
Three-state the I2S output and the MCLK out.
Sets polarity of power-down pin.
0 = active low.
1 = active high.
[2:1] *****00*
Power-Down Pin
Function
Selects the function of the power-down pin.
00 = power-down.
01 = power-down and three-state SOG.
10 = three-state outputs only.
11 = three-state outputs and SOG.
0 = normal.
[0]
[7]
*******0
1*******
Power-Down
1 = power-down.
0x27
Read/Write
Auto Power-Down
Enable
0 = disable auto low power state.
1 = enable auto low power state.
[6]
[5]
*0******
**0*****
HDCP A0
Sets the LSB of the address of the HDCP I2C. Set to 1 only
for a second receiver in a dual-link configuration.
0 = use internally generated MCLK.
1 = use external MCLK input.
If an external MCLK is used, it must be locked to the
video clock according to the CTS and N available in the
I2C. Any mismatch between the internal MCLK and the
input MCLK results in dropped or repeated audio
samples.
MCLK External Enable
Rev. 0 | Page 15 of 44
AD9398
Read/Write
or Read
Only
Default
Bits Value
Hex Address
Register Name
Description
[4]
***0****
BT656 EN
Enables EAV/SAV codes to be inserted into the video
output data.
[3]
****0***
Force DE Generation
Interlace Offset
Allows use of the internal DE generator in DVI mode.
Sets the difference (in HSYNCs) in field length between
Field 0 and Field 1.
[2:0] *****000
[7:2] 011000**
[1:0] ******01
0x28
0x29
Read/Write
Read/Write
VS Delay
Sets the delay (in lines) from the VSYNC leading edge to
the start of active video.
MSB, Register 0x29.
HS Delay MSB
[7:0] 00000100 HS Delay
Sets the delay (in pixels) from the HSYNC leading edge
to the start of active video.
0x2A
0x2B
0x2C
0x2D
0x2E
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
[3:0] ****0101
Line Width MSB
MSB, Register 0x2B.
[7:0] 00000000 Line Width
Sets the width of the active video line in pixels.
MSB, Register 0x2D.
[3:0] ****0010
Screen Height MSB
[7:0] 11010000 Screen Height
Sets the height of the active screen in lines.
Allows Ctrl [3:0] to be output on the I2S data pins.
00 = I2S mode.
[7]
0*******
Ctrl EN
[6:5] *00*****
I2S Out Mode
01 = right-justified.
10 = left-justified.
11 = raw IEC60958 mode.
Sets the desired bit width for right-justified mode.
Detects a TMDS DE.
Detects a TMDS clock.
Gives the status of AV mute based on general control
packets.
[4:0] ***11000
I2S Bit Width
TMDS Sync Detect
TMDS Active
AV Mute
0x2F
0x30
Read
Read
[6]
[5]
[4]
*0******
**0*****
***0****
[3]
****0***
HDCP Keys Read
HDMI Quality
Returns 1 when read of EEPROM keys is successful.
Returns quality number based on DE edges.
[2:0] *****000
[6]
*0******
HDMI Content
Encrypted
This bit is high when HDCP decryption is in use (content
is protected). The signal goes low when HDCP is not
being used. Use this bit to allow copying of the content.
The bit should be sampled at regular intervals because it
can change on a frame-by-frame basis.
[5]
[4]
**0*****
***0****
DVI HSYNC Polarity
DVI VSYNC Polarity
HDMI Pixel Repetition
Returns DVI HSYNC polarity.
Returns DVI VSYNC polarity.
Returns current HDMI pixel repetition amount. 0 = 1×,
1 = 2×, ... The clock and data outputs automatically
de-repeat by this value.
[3:0] ****0000
0x31
0x32
Read/Write
Read/Write
[7:4] 1001****
[3:0] ****0110
MV Pulse Max
MV Pulse Min
MV Oversample En
MV Pal En
Sets the maximum pseudo sync pulse width for
Macrovision detection.
Sets the minimum pseudo sync pulse width for
Macrovision detection.
[7]
[6]
0*******
*0******
Tells the Macrovision detection engine whether
oversampling occurs.
Tells the Macrovision detection engine to enter PAL
mode.
[5:0] **001101
MV Line Count Start
MV Detect Mode
Sets the start line for Macrovision detection.
0 = standard definition.
0x33
0x34
Read/Write
Read/Write
[7]
1*******
1 = progressive scan mode.
[6]
*0******
MV Settings Override
0 = use hard-coded settings for line counts and pulse
widths.
1 = use I2C values for these settings.
[5:0] **010101
[7:6] 10******
MV Line Count End
MV Pulse Limit Set
Sets the end line for Macrovision detection.
Sets the number of pulses required in the last 3 lines
(SD mode only).
Rev. 0 | Page 16 of 44
AD9398
Read/Write
or Read
Only
Default
Bits Value
Hex Address
Register Name
Description
[5]
[4]
[3]
**0*****
***0****
****0***
Low Freq Mode
Sets audio PLL to low frequency mode. Low frequency
mode should only be set for pixel clocks <80 MHz.
Allows the previous bit to be used to set low frequency
mode rather than the internal auto-detect.
Low Freq Override
Up Conversion Mode
0 = repeat Cr and Cb values.
1 = interpolate Cr and Cb values.
Enables the FIR filter for 4:2:2 CrCb output.
Enables the color space converter (CSC). The default
settings for the CSC provide HDTV-to-RGB conversion.
[2]
[1]
*****0**
******0*
CrCb Filter Enable
CSC_Enable
Sets the fixed point position of the CSC coefficients,
including the A4, B4, C4 offsets.
0x35
0x36
Read/Write
Read/Write
[6:5] *01* ****
[4:0] ***01100
CSC_Mode
00 = 1.0, −4096 to +4095.
01 = 2.0, −8192 to +8190.
1× = 4.0, −16384 to +16380.
MSB, Register 0x36.
CSC_Coeff_A1 MSB
[7:0] 01010010 CSC_Coeff_A1 LSB
Color space converter (CSC) coefficient for equation:
ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4
GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4
BOUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4
MSB, Register 0x38.
0x37
0x38
Read/Write
Read/Write
[4:0] ***01000
CSC_Coeff_A2 MSB
[7:0] 00000000 CSC_Coeff_A2 LSB
CSC coefficient for equation:
ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4
GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4
BOUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4
MSB, Register 0x3A.
0x39
0x3A
Read/Write
Read/Write
[4:0] ***00000
CSC_Coeff_A3 MSB
[7:0] 00000000 CSC_Coeff_A3 LSB
CSC coefficient for equation:
ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4
GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4
BOUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4
MSB, Register 0x3C.
0x3B
0x3C
Read/Write
Read/Write
[4:0] ***11001
CSC_Coeff_A4 MSB
[7:0] 11010111 CSC_Coeff_A4
CSC coefficient for equation:
R
OUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4
GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4
BOUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4
MSB, Register 0x3E.
0x3D
0x3E
Read/Write
Read/Write
[4:0] ***11100
CSC_Coeff_B1 MSB
[7:0] 01010100 CSC_Coeff_B1 LSB
CSC coefficient for equation:
ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4
GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4
BOUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4
MSB, Register 0x40.
0x3F
0x40
Read/Write
Read/Write
[4:0] ***01000
CSC_Coeff_B2 MSB
[7:0] 00000000 CSC_Coeff_B2 LSB
CSC coefficient for equation:
ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4
G
OUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4
BOUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4
MSB, Register 0x42.
0x41
0x42
Read/Write
Read/Write
[4:0] ***11110
CSC_Coeff_B3 MSB
[7:0] 10001001 CSC_Coeff_B3 LSB
CSC coefficient for equation:
ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4
GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4
BOUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4
MSB, Register 0x44.
0x43
Read/Write
[4:0] ***00010
CSC_Coeff_B4 MSB
Rev. 0 | Page 17 of 44
AD9398
Read/Write
or Read
Only
Default
Bits Value
Hex Address
Register Name
Description
0x44
Read/Write
[7:0] 10010010 CSC_Coeff_B4 LSB
CSC coefficient for equation:
ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4
GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4
BOUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4
MSB, Register 0x46.
0x45
0x46
Read/Write
Read/Write
[4:0] ***00000
CSC_Coeff_C1 MSB
[7:0] 00000000 CSC_Coeff_C1 LSB
CSC coefficient for equation:
ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4
GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4
BOUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4
0x47
0x48
Read/Write
Read/Write
[4:0] ***01000
CSC_Coeff_C2 MSB
MSB, Register 0x48.
[7:0] 00000000 CSC_Coeff_C2 LSB
CSC coefficient for equation:
ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4
GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4
BOUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4
MSB, Register 0x4A.
0x49
0x4A
Read/Write
Read/Write
[4:0] ***01110
CSC_Coeff_C3 MSB
[7:0] 10000111 CSC_Coeff_C3 LSB
CSC coefficient for equation:
ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4
GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4
BOUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4
MSB, Register 0x4C.
0x4B
0x4C
Read/Write
Read/Write
[4:0] ***11000
CSC_Coeff_C4 MSB
[7:0] 10111101 CSC_Coeff_C4 LSB
CSC coefficient for equation:
ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4
GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4
BOUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4
Must be written to 0x20 for proper operation.
Must be written to default of 0x0F for proper operation.
A1 overrides the AV mute value with Bit 6.
Sets AV mute value if override is enabled.
Disables mute of video during AV mute.
Disables mute of audio during AV mute.
MCLK PLL enable—uses analog PLL.
MCLK PLL N [2:0]—this controls the division of the MCLK
out of the PLL: 0 = /1, 1 = /2, 2 = /3, 3 = /4, and so on.
Prevents the N/CTS packet on the link from writing to
the N and CTS registers.
Controls the multiple of 128 fS used for MCLK out.
0 = 128 fS, 1 = 256 fS, 2 = 384 fS, 7 = 1024 fS.
0x50
0x56
0x57
Read/Write
Read/Write
Read/Write
[7:0] 00100000 Test
[7:0] 00001111 Test
[7]
[6]
[3]
[2]
0*******
*0******
****0***
*****0**
A/V Mute Override
AV Mute Value
Disable Video Mute
Disable Audio Mute
MCLK PLL Enable
MCLK PLL_N
0x58
0x59
Read/Write
Read/Write
[7]
[6:4]
[3]
N_CTS_Disable
MCLK FS_N
[2:0]
[6]
[5]
MDA/MCL PU
CLK Term O/R
This disables the MDA/MCL pull-ups.
Clock termination power-down override: 0 = auto,
1 = manual.
[4]
[2]
[1]
[0]
Manual CLK Term
FIFO Reset UF
FIFO Reset OF
MDA/MCL Three-State
Packet Detected
Clock termination: 0 = normal, 1 = disconnected.
This bit resets the audio FIFO if underflow is detected.
This bit resets the audio FIFO if overflow is detected.
This bit three-states the MDA/MCL lines.
0x5A
Read
[6:0]
These 7 bits are updated if any specific packet has been
received since last reset or loss of clock detect. Normal is
0x00.
Bit Data Packet Detected
0
1
2
3
AVI infoframe.
Audio infoframe.
SPD infoframe.
MPEG source infoframe.
Rev. 0 | Page 18 of 44
AD9398
Read/Write
or Read
Only
Default
Bits Value
Hex Address
Register Name
Description
4
5
6
ACP packets.
ISRC1 packets.
ISRC2 packets.
0x5B
0x5E
Read
Read
[3]
HDMI Mode
0 = DVI, 1 = HDMI.
[7:6]
[5:3]
Channel Status
Mode = 00. All others are reserved.
When Bit 1 = 0 (linear PCM):
000 = 2 audio channels without pre-emphasis.
001 = 2 audio channels with 50/15 μs pre-emphasis.
010 = reserved.
011 = reserved.
2
1
0 = software for which copyright is asserted.
1 = software for which no copyright is asserted.
0 = audio sample word represents linear PCM samples.
1 = audio sample word used for other purposes.
0 = consumer use of channel status block.
0
Audio Channel Status
0x5F
0x60
Read
Read
[7:0]
Channel Status
Category Code
[7:4]
[3:0]
[5:4]
Channel Number
Source Number
Clock Accuracy
0x61
Read
Clock accuracy.
00 = Level II.
01 = Level III.
10 = Level I.
11 = reserved.
0011 = 32 kHz.
0000 = 44.1 kHz.
1000 = 88.2 kHz.
1100 = 176.4 kHz.
0010 = 48 kHz.
1010 = 96 kHz.
1110 = 192 kHz.
Word length.
[3:0]
[3:0]
Sampling
Frequency
0x62
Read
Word Length
0000 = not specified.
0100 = 16 bits.
0011 = 17 bits.
0010 = 18 bits.
0001 = 19 bits.
0101 = 20 bits.
1000 = not specified.
1100 = 20 bits.
1011 = 21 bits.
1010 = 22 bits.
1001 = 23 bits.
1101 = 24 bits.
0x7B
Read
[7:0]
CTS [19:12]
Cycle time stamp—this 20-bit value is used with the N
value to regenerate an audio clock. For remaining bits,
see Register 0x7C and Register 0x7D.
0x7C
0x7D
Read
Read
Read
[7:0]
[7:4]
[3:0]
CTS [11:4]
CTS [3:0]
N [19:16]
20-bit N used with CTS to regenerate the audio clock. For
remaining bits, see Register 0x7E and Register 0x7F.
0x7E
Read
[7:0]
N [15:8]
Rev. 0 | Page 19 of 44
AD9398
Read/Write
or Read
Only
Default
Bits Value
Hex Address
Register Name
Description
0x7F
Read
[7:0]
N [7:0]
AVI Infoframe
0x80
0x81
Read
Read
[7:0]
[6:5]
AVI Infoframe Version
Y [1:0] Indicates RGB, 4:2:2, or 4:4:4.
00 = RGB.
01 = YCbCr 4:2:2.
10 = YCbCr 4:4:4.
4
Active Format
Information Status
Active format information present.
0 = no data.
1 = active format information valid.
B [1:0].
[3:2]
Bar Information
00 = no bar information.
01 = horizontal bar information valid.
10 = vertical bar information valid.
11 = horizontal and vertical bar information valid.
S [1:0].
00 = no information.
01 = overscanned (television).
10 = underscanned (computer).
C [1:0].
00 = no data.
01 = SMPTE 170M, ITU601.
10 = ITU709.
M [1:0].
00 = no data.
[1:0]
[7:6]
[5:4]
[3:0]
Scan Information
Colorimetry
0x82
Read
Picture Aspect Ratio
01 = 4:3.
10 = 16:9.
R [3:0].
Active Format Aspect
Ratio
1000 = same as picture aspect ratio.
1001 = 4:3 (center).
1010 = 16:9 (center).
1011 = 14:9 (center).
SC[1:0].
0x83
Read
[1:0]
Nonuniform Picture
Scaling
00 = no known nonuniform scaling.
01 = picture has been scaled horizontally.
10 = picture has been scaled vertically.
11 = picture has been scaled horizontally and vertically.
0x84
0x85
Read
Read
[6:0]
[3:0]
Video Identification
Code
VIC [6:0] video identification code—refer to CEA EDID
short video descriptors.
Pixel Repeat
PR [3:0]—This specifies how many times a pixel has been
repeated.
0000 = no repetition (pixel sent once).
0001 = pixel sent twice (repeated once).
0010 = pixel sent 3 times.
1001 = pixel sent 10 times.
0xA—0xF reserved.
0x86
Read
[7:0]
Active Line Start LSB
This represents the line number of the end of the top
horizontal bar. If 0, there is no horizontal bar. Combines
with Register 0x88 for a 16-bit value.
Rev. 0 | Page 20 of 44
AD9398
Read/Write
or Read
Only
Default
Bits Value
Hex Address
Register Name
Description
0x87
Read
[6:0]
New Data Flags
New data flags. These 8 bits are updated if any specific
data changes. Normal (no NDFs) is 0x00. When any NDF
register is read, all bits reset to 0x00. All NDF registers
contain the same data.
Bit Data Packet Changed
0
1
2
3
4
5
6
AVI infoframe.
audio infoframe.
SPD infoframe.
MPEG source infoframe.
ACP packets.
ISRC1 packets.
ISRC2 packets.
0x88
0x89
Read
Read
[7:0]
[7:0]
Active Line Start MSB
Active Line End LSB
Active line start MSB (see Register 0x86).
This represents the line number of the beginning of a
lower horizontal bar. If greater than the number of active
video lines, there is no lower horizontal bar. Combines
with Register 0x8A for a 16-bit value.
0x8A
0x8B
Read
Read
[7:0]
[7:0]
Active Line End MSB
Active Pixel Start LSB
Active line end MSB. See Register 0x89.
This represents the last pixel in a vertical pillar bar at the
left side of the picture. If 0, there is no left bar. Combines
with Register 0x8C for a 16-bit value.
0x8C
0x8D
Read
Read
[7:0]
[7:0]
Active Pixel Start MSB
Active Pixel End LSB
Active pixel start MSB. See Register 0x8B.
This represents the first horizontal pixel in a vertical
pillar-bar at the right side of the picture. If greater than
the maximum number of horizontal pixels, there is no
vertical bar. Combines with Register 0x8E for a16-bit
value.
0x8E
0x8F
0x90
Read
Read
Read
[7:0]
[6:0]
[7:0]
Active Pixel End MSB
New Data Flags
Active pixel end MSB. See Register 0x8D.
New data flags (see 0x87).
Audio Infoframe
Version
0x91
Read
[7:4]
Audio Coding Type
CT [3:0]. Audio coding type.
0x00 = refer to stream header.
0x01 = IEC60958 PCM.
0x02 = AC3.
0x03 = MPEG1 (Layers 1 and 2).
0x04 = MP3 (MPEG1 Layer 3).
0x05 = MPEG2 (multichannel).
0x06 = AAC.
0x07 = DTS.
0x08 = ATRAC.
[2:0]
[4:2]
Audio Coding Count
Sampling Frequency
CC [2:0]. Audio channel count.
000 = refer to stream header.
001 = 2 channels.
010 = 3 channels.
111 = 8 channels
0x92
Read
SF [2:0]. Sampling frequency.
000 = refer to stream header.
001 = 32 kHz.
010 = 44.1 kHz (CD).
011 = 48 kHz.
100 = 88.2 kHz.
101 = 96 kHz.
Rev. 0 | Page 21 of 44
AD9398
Read/Write
or Read
Only
Default
Bits Value
Hex Address
Register Name
Description
110 = 176.4 kHz.
111 = 192 kHz.
SS [1:0]. Sample size.
00 = refer to stream header.
01 = 16-bit.
[1:0]
Sample Size
10 = 20-bit.
11 = 24-bit.
0x93
0x94
Read
Read
[7:0]
Max Bit Rate
Max bit rate (compressed audio only). The value of this
field multiplied by 8 kHz represents the maximum bit
rate.
[7:0]
7
Speaker Mapping
Down-Mix
CA [7:0]. Speaker mapping or placement for up to
8 channels. See Table 33.
DM_INH—down-mix inhibit.
0 = permitted or no information.
1 = prohibited.
0x95
Read
[6:3]
Level Shift
LSV [3:0]—level shift values with attenuation
information.
0000 = 0 dB attenuation.
0001 = 1 dB attenuation.
. . .
1111 = 15 dB attenuation.
Reserved.
0x96
0x97
Read
Read
[7:0]
[6:0]
New Data Flags
New data flags (see 0x87).
Source Product Description (SPD) Infoframe
0x98
0x99
Read
Read
[7:0]
[7:0]
Source Product
Description (SPD)
Infoframe Version
Vender Name
Character 1
Vender Name Character 1 (VN1) 7-bit ASCII code. The
first of 8 characters naming the product company.
0x9A
0x9B
0x9C
0x9D
0x9E
0x9F
0xA0
0xA1
0xA2
Read
Read
Read
Read
Read
Read
Read
Read
Read
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[6:0]
[7:0]
[7:0]
[7:0]
VN2
VN2.
VN3
VN3.
VN4
VN4.
VN5
VN5.
VN6
VN6.
New Data Flags
New data flags (see 0x87).
VN7
VN8
VN7.
VN8.
Product Description
Character 1
Product Description Character 1 (PD1) 7-bit ASCII code.
The first of 16 characters that contain the model number
and a short description.
0xA3
0xA4
0xA5
0xA6
0xA7
0xA8
0xA9
0xAA
0xAB
0xAC
0xAD
0xAE
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[6:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
PD2
PD2.
PD3
PD3.
PD4
PD4.
PD5
PD5.
New Data Flags
PD6
New data flags (see 0x87).
PD6.
PD7
PD7.
PD8
PD8.
PD9
PD9.
PD10
PD11
PD12
PD10.
PD11.
PD12.
Rev. 0 | Page 22 of 44
AD9398
Read/Write
or Read
Only
Default
Bits Value
Hex Address
0xAF
Register Name
New Data Flags
PD13
Description
Read
Read
Read
Read
Read
Read
[6:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
New data flags (see 0x87).
PD13.
0xB0
0xB1
PD14
PD14.
0xB2
PD15
PD15.
0xB3
PD16
PD16.
0xB4
Source Device
Information Code
This code classifies the source device.
0x00 = unknown.
0x01 = digital STB.
0x02 = DVD.
0x03 = D-VHS.
0x04 = HDD video.
0x05 = DVC.
0x06 = DSC.
0x07 = video CD.
0x08 = game.
0x09 = PC general.
New data flags (see 0x87).
0xB7
Read
[6:0]
New Data Flags
MPEG Source Infoframe
0xB8
0xB9
Read
Read
[7:0]
[7:0]
MPEG Source
Infoframe Version
MB(0)
MB[0] (lower byte of MPEG bit rate: Hz). This is the lower
8 bits of 32 bits (4 bytes) that specify the MPEG bit rate
in Hz.
0xBA
0xBB
0xBC
Read
Read
Read
[7:0]
[7:0]
[7:0]
4
MB[1]
MB[2]
MB[1].
MB[2].
MB[3] (upper byte).
FR—new field or repeated field.
0 = new field or picture.
1 = repeated field.
Field Repeat
MPEG Frame
0xBD
Read
[1:0]
MF[1:0] This identifies whether frame is an I, B, or P
picture.
00 = unknown.
01 = I picture.
10 = B picture.
11 = P picture.
0xBE
0xBF
0xC0
Read
Read
Read
[7:0]
[6:0]
[7:0]
Reserved.
New Data Flags
New data flags (see 0x87).
Audio content protection packet (ACP) type.
Audio Content
Protection Packet
(ACP) Type
0x00 = generic audio.
0x01 = IEC 60958-identified audio.
0x02 = DVD-audio.
0x03 = reserved for super audio CD (SACD).
0x04 = 0xFF reserved.
ACP Packet Byte 0 (ACP_PB0).
ACP_PB1.
0xC1
0xC2
0xC3
0xC4
0xC5
0xC6
0xC7
Read
Read
Read
Read
Rea
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[6:0]
ACP Packet Byte 0
ACP_PB1
ACP_PB2
ACP_PB2.
ACP_PB3
ACP_PB3.
ACP_PB4
ACP_PB4.
Read
Read
ACP_PB5
ACP_PB5.
NDF
New data flags (see 0x87).
Rev. 0 | Page 23 of 44
AD9398
Read/Write
or Read
Only
Default
Bits Value
Hex Address
Register Name
Description
0xC8
7
ISRC1 Continued
International standard recording code (ISRC1).
continued. This indicates an ISRC2 packet is being
transmitted.
Read
6
ISRC1 Valid
0 = ISRC1 status bits and PBs not valid.
1 = ISRC1 status bits and PBs valid.
001 = starting position.
010 = intermediate position.
100 = final position.
ISRC1 Packet Byte 0 (ISRC1_PB0).
ISRC1_PB1.
[2:0]
ISRC1 Status
0xC9
0xCA
0xCB
0xCC
0xCD
0xCE
0xCF
0xD0
0xD1
0xD2
0xD3
0xD4
0xD5
0xD6
0xD7
0xD8
0xD9
0xDA
0xDB
0xDC
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[6:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[6:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
ISRC1 Packet Byte 0
ISRC1_PB1
ISRC1_PB2
ISRC1_PB3
ISRC1_PB4
ISRC1_PB5
NDF
ISRC1_PB2.
ISRC1_PB3.
ISRC1_PB4.
ISRC1_PB5.
New data flags (see 0x87).
ISRC1_PB6.
ISRC1_PB6
ISRC1_PB7
ISRC1_PB8
ISRC1_PB9
ISRC1_PB10
ISRC1_PB11
ISRC1_PB12
NDF
ISRC1_PB7.
ISRC1_PB8.
ISRC1_PB9.
ISRC1_PB10.
ISRC1_PB11.
ISRC1_PB12.
New data flags (see 0x87).
ISRC1_PB13.
ISRC1_PB13
ISRC1_PB14
ISRC1_PB15
ISRC1_PB16
ISRC2 Packet Byte 0
ISRC1_PB14.
ISRC1_PB15.
ISRC1_PB16.
ISRC2 Packet Byte 0 (ISRC2_PB0). This is transmitted only
when the ISRC_ continue bit (Register 0xC8, Bit 7) is set
to 1.
0xDD
0xDE
0xDF
0xE0
0xE1
0xE2
0xE3
0xE4
0xE5
0xE6
0xE7
0xE8
0xE9
0xEA
0xEB
0xEC
0xED
0xEE
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
[7:0]
[7:0]
[6:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[6:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
[7:0]
ISRC2_PB1
ISRC2_PB2
New Data Flags
ISRC2_PB3
ISRC2_PB4
ISRC2_PB5
ISRC2_PB6
ISRC2_PB7
ISRC2_PB8
ISRC2_PB9
New Data Flags
ISRC2_PB10
ISRC2_PB11
ISRC2_PB12
ISRC2_PB13
ISRC2_PB14
ISRC2_PB15
ISRC2_PB16
ISRC2_PB1.
ISRC2_PB2.
New data flags (see 0x87).
ISRC2_PB3.
ISRC2_PB4.
ISRC2_PB5.
ISRC2_PB6.
ISRC2_PB7.
ISRC2_PB8.
ISRC2_PB9.
New data flags (see 0x87).
ISRC2_PB10.
ISRC2_PB11.
ISRC2_PB12.
ISRC2_PB13.
ISRC2_PB14.
ISRC2_PB15.
ISRC2_PB16.
Rev. 0 | Page 24 of 44
AD9398
2-WIRE SERIAL CONTROL REGISTER DETAILS
CHIP IDENTIFICATION
0x12—Bit[4] VSYNC Polarity Override
0 = auto VSYNC polarity, 1 = manual VSYNC polarity. Manual
VSYNC polarity is defined in Register 0x11, Bit 5. The power-
up default is 0.
0x00—Bits[7:0] Chip Revision
An 8-bit value that reflects the current chip revision.
0x11—Bit[7] HSYNC Source
0x17—Bits[3:0] HSYNCs per VSYNC MSBs
0 = HSYNC, 1 = SOG. The power-up default is 0. These
selections are ignored if Register 0x11, Bit 6 = 0.
The 4 MSBs of the 12-bit counter that reports the number of
HSYNCs/VSYNC on the active input. This is useful in
determining the mode and aid in setting the PLL divide ratio.
0x11—Bit[6] HSYNC Source Override
0 = auto HSYNC source, 1 = manual HSYNC source. Manual
HSYNC source is defined in Register 0x11, Bit 7. The power-up
default is 0.
0x18—Bit[7:0] HSYNCs per VSYNC LSBs
The 8 LSBs of the 12-bit counter that reports the number of
HSYNCs/VSYNC on the active input.
0x11—Bit[5] VSYNC Source
0x21—Bit[5] VSYNC Filter Enable
0 = VSYNC, 1 = VSYNC from SOG. The power-up default is 0.
These selections are ignored if Register 0x11, Bit 4 = 0.
The purpose of the VSYNC filter is to guarantee the position of
the VSYNC edge with respect to the HSYNC edge and to
generate a field signal. The filter works by examining the
placement of VSYNC and regenerating a correctly placed
VSYNC one line later. The VSYNC is first checked to see
whether it occurs in the Field 0 position or the Field 1 position.
This is done by checking the leading edge position against the
sync separator threshold and the HSYNC position. The HSYNC
width is divided into four quadrants with Quadrant 1 starting at
the HSYNC leading edge plus a sync separator threshold. If the
VSYNC leading edge occurs in Quadrant 1 or Quadrant 4, the
field is set to 0 and the output VSYNC is placed coincident with
the HSYNC leading edge. If the VSYNC leading edge occurs in
Quadrant 2 or Quadrant 3, the field is set to 1 and the output
VSYNC leading edge is placed in the center of the line. In this
way, the VSYNC filter creates a predictable relative position
between HSYNC and VSYNC edges at the output.
0x11—Bit[4] VSYNC Source Override
0 = auto VSYNC source, 1 = manual VSYNC source. Manual
VSYNC source is defined in Register 0x11, Bit 5. The power-up
default is 0.
0x11—Bit[3] Channel Select
0 = Channel 0, 1 = Channel 1. The power-up default is 0. These
selections are ignored if Register 0x11, Bit 2 = 0.
0x11—Bit[2] Channel Select Override
0 = auto channel select, 1 = manual channel select. Manual
channel select is defined in Register 0x11, Bit 3. The power-up
default is 0.
0x11—Bit[1] Interface Select
0 = analog interface, 1 = digital interface. The power-up default
is 0. These selections are ignored if Register 0x11, Bit 0 = 0.
If the VSYNC occurs near the HSYNC edge, this guarantees
that the VSYNC edge follows the HSYNC edge. This performs
filtering also in that it requires a minimum of 64 lines between
VSYNCs. The VSYNC filter cleans up extraneous pulses that
might occur on the VSYNC. This should be enabled whenever
the HSYNC/VSYNC count is used. Setting this bit to 0 disables
the VSYNC filter. Setting this bit to 1 enables the VSYNC filter.
Power-up default is 0.
0x11—Bit[0] Interface Select Override
0 = auto interface select, 1 = manual interface select. Manual
interface select is defined in Register 0x11, Bit 1. The power-up
default is 0.
0x12—Bit[7] Input HSYNC Polarity
0 = active low, 1 = active high. The power-up default is 1. These
selections are ignored if Register 10x2, Bit 6 = 0.
0x21—Bit[4] VSYNC Duration Enable
This enables the VSYNC duration block which is designed to
be used with the VSYNC filter. Setting the bit to 0 leaves the
VSYNC output duration unchanged; setting the bit to 1 sets the
VSYNC output duration based on Register 0x22. The power-up
default is 0.
0x12—Bit[6] HSYNC Polarity Override
0 = auto HSYNC polarity, 1 = manual HSYNC polarity.
Manual HSYNC polarity is defined in Register 0x11, Bit 7.
The power-up default is 0.
0x12—Bit[5] Input VSYNC Polarity
0x22—Bits[7:0] VSYNC Duration
0 = active low, 1 = active high. The power-up default is 1. These
selections are ignored if Register 0x11, Bit 4 = 0.
This is used to set the output duration of the VSYNC, and is
designed to be used with the VSYNC filter. This is valid only if
Register 0x21, Bit 4 is set to 1. Power-up default is 4.
Rev. 0 | Page 25 of 44
AD9398
0x23—Bits[7:0] HSYNC Duration
0x25—Bits[5:4] Output Drive Strength
An 8-bit register that sets the duration of the HSYNC output
pulse. The leading edge of the HSYNC output is triggered by
the internally generated, phase-adjusted PLL feedback clock.
The AD9398 then counts a number of pixel clocks equal to the
value in this register. This triggers the trailing edge of the
HSYNC output, which is also phase-adjusted. The power-up
default is 32.
These two bits select the drive strength for all the high speed
digital outputs (except VSOUT, A0, and O/E FIELD). Higher
drive strength results in faster rise/fall times and in general
makes it easier to capture data. Lower drive strength results in
slower rise/fall times and helps to reduce EMI and digitally
generated power supply noise. The power-up default setting is 11.
Table 13. Output Drive Strength
0x24—Bit[7] HSYNC Output Polarity
Output Drive
Result
00
01
10
11
Low output drive strength
Medium low output drive strength
Medium high output drive strength
High output drive strength
This bit sets the polarity of the HSYNC output. Setting this bit
to 0 sets the HSYNC output to active low. Setting this bit to 1
sets the HSYNC output to active high. The power-up default
setting is 1.
0x24—Bit[6] VSYNC Output Polarity
0x25—Bits[3:2] Output Mode
This bit sets the polarity of the VSYNC output (both DVI and
analog). Setting this bit to 0 sets the VSYNC output to active
low. Setting this bit to 1 sets the VSYNC output to active high.
Power-up default is 1.
These bits choose between four options for the output mode,
one of which is exclusive to an HDMI input. 4:4:4 mode is
standard RGB; 4:2:2 mode is YCrCb, which reduces the number
of active output pins from 24 to 16; 4:4:4 is double data rate
(DDR) output mode; and the data is RGB mode that changes on
every clock edge. The power-up default setting is 00.
0x24—Bit[5] Display Enable Output Polarity
This bit sets the polarity of the display enable (DE) for both
DVI and analog. 0 = DE output polarity is negative. 1 = DE
output polarity is positive. The power-up default is 1.
Table 14. Output Mode
Output
Mode
Result
0x24—Bit[4] Field Output Polarity
00
4:4:4 RGB mode
This bit sets the polarity of the field output signal on Pin 21.
0 = active low = even field; active high = odd field. 1 = active
low = odd field; active high = even field. The power-up default
setting is 1.
01
10
4:2:2 YCrCb mode + DDR 4:2:2 on blue (secondary)
DDR 4:4:4: DDR mode + DDR 4:2:2 on blue
(secondary)
11
12-bit 4:2:2 (HDMI option only)
0x24—Bit[0] Output Clock Invert
0x25—Bit[1] Primary Output Enable
This bit allows inversion of the output clock as specified by
Register 0x25, Bit 7 to Bit 6. 0 = noninverted clock. 1 = inverted
clock. The power-up default setting is 0.
This bit places the primary output in active or high impedance
mode. The primary output is designated when using either 4:2:2
or DDR 4:4:4. In these modes, the data on the red and green
output channels is the primary output, while the output data
on the blue channel (DDR YCrCb) is the secondary output.
0 = primary output is in high impedance mode. 1 = primary
output is enabled. The power-up default setting is 1.
0x25—Bits[7:6] Output Clock Select
These bits select the clock output on the DATACLK pin. They
include ½× clock, a 2× clock, a 90° phase shifted clock, or the
normal pixel clock. The power-up default setting is 01.
Table 12. Output Clock Select
0x25—Bit[0] Secondary Output Enable
Select
Result
This bit places the secondary output in active or high impe-
dance mode. The secondary output is designated when using
either 4:2:2 or DDR 4:4:4. In these modes, the data on the blue
output channel is the secondary output, while the output data
on the red and green channels is the primary output. Secondary
output is always a DDR YCrCb data mode. 0 = secondary
output is in high impedance mode. 1 = secondary output is
enabled. The power-up default setting is 0.
00
01
10
11
½× pixel clock
1× pixel clock
2× pixel clock
90° phase 1× pixel clock
Rev. 0 | Page 26 of 44
AD9398
0x27—Bit[5] MCLK External Enable
0x26—Bit[7] Output Three-State
This bit enables the MCLK to be supplied externally. If an
external MCLK is used, then it must be locked to the video
clock according to the CTS and N available in the I2C. Any
mismatch between the internal MCLK and the input MCLK
results in dropped or repeated audio samples. 0 = use internally
generated MCLK. 1 = use external MCLK input. The power-up
default setting is 0.
When enabled, this bit puts all outputs (except SOGOUT) in a
high impedance state. 0 = normal outputs. 1 = all outputs
(except SOGOUT) in high impedance mode. The power-up
default setting is 0.
0x26—Bit[5] S/PDIF Three-State
When enabled, this bit places the S/PDIF audio output pins in a
high impedance state. 0 = normal S/PDIF output. 1 = S/PDIF
pins in high impedance mode. The power-up default setting is
0.
BT656 GENERATION
0x27—Bit[4] BT656 Enable
This bit enables the output to be BT656 compatible with the
defined start of active video (SAV) and the end of active video
(EAV) controls to be inserted. These require specification of the
number of active lines, active pixels per line, and delays to place
these markers. 0 = disable BT656 video mode. 1 = enable BT656
video mode. The power-up default setting is 0.
0x26—Bit[4] I2S Three-State
When enabled, this bit places the I2S output pins in a high
impedance state. 0 = normal I2S output. 1 = I2S pins in high
impedance mode. The power-up default setting is 0.
0x26—Bit[3] Power-Down Polarity
0x27—Bit[3] Force DE Generation
This bit defines the polarity of the input power-down pin.
0 = power-down pin is active low. 1 = power-down pin is active
high. The power-up default setting is 1.
This bit allows the use of the internal DE generator in DVI
mode. 0 = internal DE generation disabled. 1 = force DE
generation via programmed registers. The power-up default
setting is 0.
0x26—Bits[2:1] Power-Down Pin Function
These bits define the different operational modes of the power-
down pin. These bits are functional only when the power-down
pin is active; when it is not active, the part is powered up and
functioning. 0 = the chip is powered down and all outputs are in
high impedance mode. 1 = the chip remains powered up, but all
outputs are in high impedance mode. The power-up default
setting is 00.
0x27—Bits[2:0] Interlace Offset
These bits define the offset in HSYNCs from Field 0 to Field 1.
The power-up default setting is 000.
0x28—Bits[7:2] VSYNC Delay
These bits set the delay (in lines) from the leading edge of
VSYNC to active video. The power-up default setting is 24.
0x26—Bit[0] Power-Down
0x28—Bits[1:0] HSYNC Delay MSBs
This bit is used to put the chip in power-down mode. In this
mode, the power dissipation is reduced to a fraction of the
typical power (see Table 1 for exact power dissipation). When in
power-down, the HSOUT, VSOUT, DATACK, and all 30 of the
data outputs are put into a high impedance state. Note that the
SOGOUT output is not put into high impedance. Circuit blocks
that continue to be active during power-down include the
voltage references, sync processing, sync detection, and the
serial register. These blocks facilitate a fast start-up from power-
down. 0 = normal operation. 1 = power-down. The power-up
default setting is 0.
Together with Register 0x29, these 10 bits set the delay (in
pixels) from the HSYNC leading edge to the start of active
video. The power-up default setting is 0x104.
0x29—Bits[7:0] HSYNC Delay LSBs
See the HSYNC Delay MSBs section.
0x2A—Bits[3:0] Line Width MSBs
Together with Register 0x2B, these 12 bits set the width of
the active video line (in pixels). The power-up default setting
is 0x500.
0x27—Bit[7] Auto Power-Down Enable
0x2B—Bits[7:0] Line Width LSBs
This bit enables the chip to go into low power mode, or seek
mode if no sync inputs are detected. 0 = auto power-down
disabled. 1 = chip powers down if no sync inputs present. The
power-up default setting is 1.
See the Line Width MSBs section.
0x2C—Bits[3:0] Screen Height MSBs
Along with the 8 bits following these 12 bits, set the height of
the active screen (in lines). The power-up default setting is
0x2D0.
0x27—Bit[6] HDCP A0 Address
This bit sets the LSB of the address of the HDCP I2C. This
should be set to 1 only for a second receiver in a dual-link
configuration. The power-up default is 0.
0x2D—Bits[7:0] Screen Height LSBs
See the Screen Heights MSBs section.
Rev. 0 | Page 27 of 44
AD9398
0x2E—Bit[7] Ctrl Enable
0x30—Bit[5] DVI HSYNC Polarity
When set, this bit allows Ctrl [3:0] signals decoded from the
DVI to be output on the I2S data pins. 0 = I2S signals on I2S
lines. 1 = Ctrl[3:0] output on I2S lines. The power-up default
setting is 0.
This read-only bit indicates the polarity of the DVI HSYNC.
0 = DVI HSYNC polarity is low active. 1 = DVI HSYNC
polarity is high active.
0x30—Bit[4] DVI VSYNC Polarity
0x2E—Bits[6:5] I2S Output Mode
This read-only bit indicates the polarity of the DVI VSYNC.
0 = DVI VSYNC polarity is low active. 1 = DVI VSYNC polarity
is high active.
These bits select between four options for the I2S output: I2S,
right-justified, left-justified, or raw IEC60958 mode. The
power-up default setting is 00.
0x30—Bits[3:0] HDMI Pixel Repetition
Table 15. I2S Output Select
These read-only bits indicate the pixel repetition on DVI.
0 = 1×, 1 = 2×, 2 = 3×, up to a maximum repetition of
10× (0x9).
I2S Output Mode
Result
00
01
10
11
I2S mode
Right-justified
Left-justified
Raw IEC60958 mode
Table 16.
Select
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
Repetition Multiplier
1×
2×
3×
4×
5×
6×
7×
8×
9×
10×
0x2E—Bits[4:0] I2S Bit Width
These bits set the I2S bit width for right-justified mode. The
power-up default setting is 24 bits.
0x2F—Bit[6] TMDS Sync Detect
This read-only bit indicates the presence of a TMDS DE.
0 = no TMDS DE present. 1 = TMDS DE detected.
0x2F—Bit[5] TMDS Active
This read-only bit indicates the presence of a TMDS clock.
0 = no TMDS clock present. 1 = TMDS clock detected.
MACROVISION
0x31—Bits[7:4] Macrovision Pulse Max
0x2F—Bit[4] AV Mute
These bits set the pseudo sync pulse width maximum for
Macrovision detection in pixel clocks. This is functional for
13.5 MHz SDTV or 27 MHz progressive scan. Power-up
default is 9.
This read-only bit indicates the presence of AV mute based on
general control packets. 0 = AV not muted. 1 = AV muted.
0x2F—Bit[3] HDCP Keys Read
This read-only bit reports if the HDCP keys were read
successfully. 0 = failure to read HDCP keys. 1 = HDCP keys
read.
0x31—Bits[3:0] Macrovision Pulse Min
These bits set the pseudo sync pulse width maximum for
Macrovision detection in pixel clocks. This is functional for
13.5 MHz SDTV or 27 MHz progressive scan. Power-up
default is 6.
0x2F—Bits[2:0] HDMI Quality
These read-only bits indicate a level of HDMI quality based on
the DE (display enable) edges. A larger number indicates a
higher quality.
0x32—Bit[7] Macrovision Oversample Enable
Tells the Macrovision detection engine whether oversampling
is used. This accommodates 27 MHz sampling for SDTV and
54 MHz sampling for progressive scan and is used as a
correction factor for clock counts. Power-up default is 0.
0x30—Bit[6] HDMI Content Encrypted
This read-only bit is high when HDCP decryption is in use
(content is protected). The signal goes low when HDCP is not
being used. Customers can use this bit to determine whether to
allow copying of the content. The bit should be sampled at
regular intervals because it can change on a frame-by-frame
basis. 0 = HDCP not in use. 1 = HDCP decryption in use.
0x32—Bit[6] Macrovision PAL Enable
Tells the Macrovision detection engine to enter PAL mode when
set to 1. Default is 0 for NTSC mode.
0x32—Bit[5:0] Macrovision Line Count Start
Set the start line for Macrovision detection. Along with
Register 0x33, Bits [5:0], they define the region where MV
pulses are expected to occur. The power-up default is Line 13.
Rev. 0 | Page 28 of 44
AD9398
0x33—Bit[7] Macrovision Detect Mode
0x35—Bits[6:5] Color Space Converter Mode
0 = standard definition. 1 = progressive scan mode.
These two bits set the fixed-point position of the CSC
coefficients, including the A4, B4, and C4 offsets.
0x33—Bit[6] Macrovision Settings Override
Table 17. CSC Fixed Point Converter Mode
This defines whether preset values are used for the MV line
counts and pulse widths or the values stored in I2C registers.
0 = use hard-coded settings for line counts and pulse widths.
1 = use I2C values for these settings.
Select
Result
00
01
1×
1.0, −4096 to +4095
2.0, −8192 to +8190
4.0, −16384 to +16380
0x33—Bits[5:0] Macrovision Line Count End
0x35—Bits[4:0] Color Space Conversion Coefficient A1
MSBs
Set the end line for Macrovision detection. Along with
Register 0x32, Bits[5:0], they define the region where MV
pulses are expected to occur. The power-up default is Line 21.
These 5 bits form the 5 MSBs of the Color Space Conversion
Coefficient A1. This combined with the 8 LSBs of the following
register form a 13-bit, twos complement coefficient that is user
programmable. The equation takes the form of:
0x34—Bits[7:6] Macrovision Pulse Limit Select
Set the number of pulses required in the last three lines (SD
mode only). If there is not at least this number of MV pulses,
the engine stops. These 2 bits define the following pulse counts:
ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4
GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4
00 = 6
01 = 4
10 = 5 (default)
B
OUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4
The default value for the 13-bit A1 coefficient is 0x0C52.
11 = 7
0x36—Bits[7:0] Color Space Conversion Coefficient A1
LSBs
0x34—Bit[5] Low Frequency Mode
See the Register 0x35[4:0] section.
Sets whether the audio PLL is in low frequency mode or
not. Low frequency mode should only be set for pixel clocks
< 80 MHz.
0x37—Bits[4:0] CSC A2 MSBs
These five bits form the 5 MSBs of the Color Space Conversion
Coefficient A2. Combined with the 8 LSBs of the following
register, they form a 13-bit, twos complement coefficient that is
user programmable. The equation takes the form of:
0x34—Bit[4] Low Frequency Override
Allows the previous bit to be used to set low frequency mode
rather than the internal auto-detect.
ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4
GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4
0x34—Bit[3] Up Conversion Mode
0 = repeat Cb/Cr values. 1 = interpolate Cb/Cr values.
B
OUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4
0x34—Bit[2] CbCr Filter Enable
The default value for the 13-bit A2 coefficient is 0x0800.
Enables the FIR filter for 4:2:2 CbCr output.
0x38—Bits[7:0] CSC A2 LSBs
COLOR SPACE CONVERSION
See the Register 0x37 section.
The default power-up values for the color space converter
coefficients (R0x35 through R0x4C) are set for ATSC RGB-to-
YCbCr conversion. They are completely programmable for
other conversions.
0x39—Bits[4:0] CSC A3 MSBs
The default value for the 13-bit A3 is 0x0000.
0x3A—Bits[7:0] CSC A3 LSBs
0x34—Bit[1] Color Space Converter Enable
0x3B—Bits[4:0] CSC A4 MSBs
This bit enables the color space converter. 0 = disable color
space converter. 1 = enable color space converter. The power-up
default setting is 0.
The default value for the 13-bit A4 is 0x19D7.
0x3C—Bits[7:0] CSC A4 LSBs
0x3D—Bits[4:0] CSC B1 MSBs
The default value for the 13-bit B1 is 0x1C54.
0x3E—Bits[7:0] CSC B1 LSBs
0x3F—Bits[4:0] CSC B2 MSB
The default value for the 13-bit B2 is 0x0800.
Rev. 0 | Page 29 of 44
AD9398
0x40—Bits[7:0] CSC B2 LSBs
0x58—Bits[2:0] MCLK fS_N
0x41—Bits[4:0] CSC B3 MSBs
These bits control the multiple of 128 fS used for MCLK out.
The default value for the 13-bit B3 is 0x1E89.
Table 19.
MCLK fS_N [2:0]
fS Multiple
128
256
384
512
640
768
896
1024
0x42—Bits[7:0] CSC B3 LSBs
0
1
2
3
4
5
6
7
0x43—Bits[4:0] CSC B4 MSBs
The default value for the 13-bit B4 is 0x0291.
0x44—Bits[7:0] CSC B4 LSBs
0x45—Bits[4:0] CSC C1 MSBs
The default value for the 13-bit C1 is 0x0000.
0x46—Bit[7:0] CSC C1 LSBs
0x47—Bit[4:0] CSC C2 MSBs
0x59—Bit[6] MDA/MCL PU Disable
The default value for the 13 bit C2 is 0x0800.
This bit disables the inter-MDA/MCL pull-ups.
0x48—Bits[7:0] CSC C2 LSBs
0x59—Bit[5] CLK Term O/R
0x49—Bits[4:0] CSC C3 MSBs
This bit allows for overriding during power down.
0 = auto, 1 = manual.
The default value for the 13-bit C3 is 0x0E87.
0x4A—Bits[7:0] CSC C3 LSBs
0x59—Bit[4] Manual CLK Term
0x4B—Bits[4:0] CSC C4 MSBs
This bit allows normal clock termination or disconnects this.
0 = normal, 1 = disconnected.
The default value for the 13-bit C4 is 0x18BD.
0x4C—Bits[7:0] CSC C4 LSBs
0x59—Bit[2] FIFO Reset UF
0x57—Bit[7] AV Mute Override
0x57—Bit[6] AV Mute Value
This bit resets the audio FIFO if underflow is detected.
0x59—Bit[1] FIFO Reset OF
0x57—Bit[3] Disable AV Mute
0x57—Bit[2] Disable Audio Mute
0x58—Bit[7] MCLK PLL Enable
This bit enables the use of the analog PLL.
This bit resets the audio FIFO if overflow is detected.
0x59—Bit[0] MDA/MCL Three-State
This bit three-states the MDA/MCL lines to allow in-circuit
programming of the EEPROM.
0x58—Bits[6:4] MCLK PLL_N
These bits control the division of the MCLK out of the PLL.
Table 18.
0x5A—Bits[6:0] Packet Detect
This register indicates if a data packet in specific sections has
been detected. These seven bits are updated if any specific
packet has been received since last reset or loss of clock detect.
Normal is 0x00.
PLL_N [2:0]
MCLK Divide Value
0
1
2
3
4
5
6
7
/1
/2
/3
/4
/5
/6
/7
/8
Table 20.
Packet Detect Bit
Packet Detected
AVI infoframe
Audio infoframe
SPD infoframe
MPEG source infoframe
ACP packets
0
1
2
3
4
5
6
0x58—Bit[3] N_CTS_Disable
ISRC1 packets
ISRC2 packets
This bit makes it possible to prevent the N/CTS packet on the
link from writing to the N and CTS registers.
0x5B—Bit[3] HDMI Mode
0 = DVI, 1 = HDMI.
Rev. 0 | Page 30 of 44
AD9398
0x5E—Bits[7:6] Channel Status Mode
0x5E—Bits[5:3] PCM Audio Data
0x81—Bits[1:0] Scan Information
Table 24.
S [1:0]
Scan Type
0x5E—Bit[2] Copyright Information
0x5E—Bit[1] Linear PCM Identification
0x5E—Bit[0] Use of Channel Status Block
0x5F—Bits[7:0] Channel Status Category Code
0x60—Bits[7:4] Channel Number
00
No information
01
10
Overscanned (television)
Underscanned (computer)
0x82—Bits[7:6] Colorimetry
Table 25.
0x60—Bits[3:0] Source Number
C [1:0]
Colorimetry
No data
SMPTE 170M, ITU601
ITU 709
0x61—Bits[5:4] Clock Accuracy
00
01
10
0x61—Bits[3:0] Sampling Frequency
Table 21.
Code
0x0
0x2
0x3
0x8
0xA
0xC
0xE
Frequency (kHz)
44.1
48
32
88.2
96
176.4
192
0x82—Bits[5:4] Picture Aspect Ratio
Table 26.
M[1:0]
Aspect Ratio
No data
4:3
00
01
10
16:9
0x82—Bits[3:0] Active Format Aspect Ratio
Table 27.
0x62—Bits[3:0] Word Length
0x7B—Bits[7:0] CTS (Cycle Time Stamp) (19:12)
R [3:0]
Active Format A/R
Same as picture aspect ratio (M [1:0])
4:3 (center)
These are the most significant 8 bits of a 20-bit word used in the
20-bit N term in the regeneration of the audio clock.
0x8
0x9
0xA
0xB
16:9 (center)
14:9 (center)
0x7C—Bits[7:0] CTS (11:4)
0x7D—Bits[7:4] CTS (3:0)
0x7D—Bits[3:0] N (19:16)
0x83—Bits[1:0] Nonuniform Picture Scaling
Table 28.
These are the most significant 4 bits of a 20-bit word used along
with the 20-bit CTS term to regenerate the audio clock.
SC [1:0]
Picture Scaling
0x80—AVI Infoframe Version
0x81—Bits[6:5] Y[1:0]
00
01
10
11
No known nonuniform scaling
Has been scaled horizontally
Has been scaled vertically
This register indicates whether data is RGB, 4:4:4, or 4:2:2.
Table 22.
Has been scaled both horizontally and vertically
Y
Video Data
0x84—Bits[6:0] Video ID Code
00
01
10
RGB
YCbCr 4:2:2
YCbCr 4:4:4
See CEA EDID short video descriptors.
0x85—Bits[3:0] Pixel Repeat
This value indicates how many times the pixel was repeated. 0x0
= no repeats, sent once, 0x8 = 8 repeats, sent 9 times, and so on.
0x81—Bit[4] Active Format Information Present
0 = no data.1 = active format information valid.
0x86—Bits[7:0] Active Line Start LSB
0x81—Bits[3:2] Bar Information
Table 23.
Combined with the MSB in Register 0x88, these bits indicate
the beginning line of active video. All lines before this comprise
a top horizontal bar. This is used in letter box modes. If the 2-
byte value is 0x00, there is no horizontal bar.
B
Bar Type
00
01
10
11
No bar information
Horizontal bar information valid
Vertical bar information valid
Horizontal and vertical bar information valid
Rev. 0 | Page 31 of 44
AD9398
0x91—Bits[7:4] Audio Coding Type
0x87—Bit[6:0] New Data Flags (NDF)
These bits identify the audio coding so that the receiver may
process audio properly.
Table 30.
This register indicates whether data in specific sections has
changed. In the address space from 0x80 to 0xFF, each register
address ending in 0b111 (for example, 0x87, 0x8F, 0x97, 0xAF)
is an NDF register. They all have the same data and all are reset
upon reading any one of them.
CT [3:0]
Audio Coding
Refer to stream header
IEC60958 PCM
AC-3
0x0
0x1
0x2
Table 29.
NDF Bit Number
Changes Occurred
AVI infoframe
Audio infoframe
SPD infoframe
MPEG source infoframe
ACP packets
ISRC1 packets
0x3
0x4
0x5
0x6
MPEG1 (Layers 1 and 2)
MP3 (MPEG1 Layer 3)
MPEG2 (multichannel)
AAC
0
1
2
3
4
5
6
0x7
DTS
0x8
ATRAC
ISRC2 packets
0x91—Bits[2:0] Audio Channel Count
0x88—Bits[7:0] Active Line Start MSB
These bits specify how many audio channels are being sent—
2 channels to 8 channels.
Table 31.
See Register 0x86.
0x89—Bits[7:0] Active Line End LSB
CC [2:0]
Channel Count
Combined with the MSB in Register 0x8A these bits indicate
the last line of active video. All lines past this comprise a lower
horizontal bar. This is used in letter-box modes. If the 2-byte
value is greater than the number of lines in the display, there is
no lower horizontal bar.
000
001
010
011
100
101
110
111
Refer to stream header
2
3
4
5
6
7
8
0x8A—Bits[7:0] Active Line End MSB
See Register 0x89.
0x8B—Bits[7:0] Active Pixel Start LSB
0x92—Bits[4:2] Sampling Frequency
0x92—Bits[1:0] Ample Size
Combined with the MSB in Register 0x8C, these bits indicate
the first pixel in the display which is active video. All pixels
before this comprise a left vertical bar. If the 2-byte value is
0x00, there is no left bar.
0x93—Bits[7:0] Max Bit Rate
For compressed audio only, when this value is multiplied by
8 kHz, it represents the maximum bit rate. A value of 0x08 in
this field yields a maximum bit rate of (8 kHz × 8 kHz = 64 kHz).
0x8C—Bits[7:0] Active Pixel Start MSB
See Register 0x8B.
0x94—Bits[7:0] Speaker Mapping
0x8D—Bits[7:0] Active Pixel End LSB
These bits define the suggested placement of speakers.
Table 32.
Combined with the MSB in Register 0x8E, these bits indicate
the last active video pixel in the display. All pixels past this
comprise a right vertical bar. If the 2-byte value is greater than
the number of pixels in the display, there is no vertical bar.
Abbreviation
Speaker Placement
Front left
FL
FC
Front center
0x8E—Bits[7:0] Active Pixel End MSB
FR
Front right
FCL
FCR
RL
Front center left
Front center right
Rear left
See Register 0x8D.
0x8F—Bits[6:0] NDF
See Register 0x87.
RC
Rear center
RR
Rear right
0x90—Bits[7:0] Audio Infoframe Version
RCL
RCR
LFE
Rear center left
Rear center right
Low frequency effect
Rev. 0 | Page 32 of 44
AD9398
Table 33.
Bit 3
CA
Bit 2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
Channel Number
Bit 4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Bit 1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
Bit 0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Bit 8
Bit 7
Bit 6
Bit 5
Bit 4
–
Bit 3
–
LFE
–
LFE
–
LFE
–
LFE
–
LFE
–
LFE
–
LFE
–
LFE
–
LFE
–
LFE
v
LFE
–
LFE
–
LFE
–
LFE
v
LFE
–
Bit 2
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
FR
Bit 1
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
FL
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
–
FC
FC
–
RC
RC
RC
RC
RL
RL
RL
RL
RL
RL
RL
RL
RL
RL
RL
RL
–
–
FC
FC
–
RR
RR
RR
RR
RR
RR
RR
RR
RR
RR
RR
RR
–
–
–
–
–
–
–
–
–
FC
FC
–
–
–
–
–
–
RC
RC
RC
–
FC
FC
–
–
RC
RRC
RRC
RRC
RRC
FRC
FRC
FRC
FRC
FRC
FRC
FRC
FRC
FRC
FRC
FRC
FRC
RLC
RLC
RLC
RLC
FLC
FLC
FLC
FLC
FLC
FLC
FLC
FLC
FLC
FLC
FLC
FLC
–
FC
FC
–
–
v
–
–
FC
FC
–
RC
RC
RC
RC
RL
RL
RL
RL
–
FC
FC
–
–
FC
FC
RR
RR
RR
RR
1
LFE
0x95—Bit[7] Down-Mix Inhibit
0x95—Bits[6:3] Level Shift Values
0x9A—Bits[7:0] VN2
0x9B—Bits[7:0] VN3
0x9C—Bits[7:0] VN4
0x9D—Bits[7:0] VN5
0x9E—Bits[7:0] VN6
These bits define the amount of attenuation. The value directly
corresponds to the amount of attenuation: for example, 0000 =
0 dB, 0001 = 1 dB to 1111 = 15 dB attenuation.
0x9F—Bits[6:0] New Data Flags
0x96—Bits[7:0] Reserved
See Register 0x87 for a description.
0x97—Bits[6:0] New Data Flags
See Register 0x87 for a description.
0xA0—Bits[7:0] VN7
0xA1—Bits[7:0] VN8
0x98—Bits[7:0] Source Product Description (SPD)
Infoframe Version
0xA2—Bits[7:0] Product Description Character 1 (PD1)
0x99—Bits[7:0] Vender Name Character 1 (VN1)
This is the first character of 16 that contain the model number
and a short description of the product. The data characters are
7-bit ASCII code.
This is the first character in eight that is the name of the
company that appears on the product. The data characters are
7-bit ASCII code.
Rev. 0 | Page 33 of 44
AD9398
0xA3—Bits[7:0] PD2
0xBD—Bit[4] Field Repeat
0xA4—Bits[7:0] PD3
This defines whether the field is new or repeated. 0 = new field
or picture. 1 = repeated field.
0xA5—Bits[7:0] PD4
0xA6—Bits[7:0] PD5
0xBD—Bits[1:0] MPEG Frame
This identifies the frame as I, B, or P.
Table 35.
0xA7—Bits[6:0] New Data Flags
See Register 0x87 for a description.
0xA8—Bits[7:0] PD6
MF[1:0]
Frame Type
Unknown
I—picture
B—picture
P—picture
0xA9—Bits[7:0] PD7
00
01
10
11
0xAA—Bits[7:0] PD8
0xAB—Bits[7:0] PD9
0xAC—Bits[7:0] PD10
0xAD—Bits[7:0] PD11
0xAE—Bits[7:0] PD12
0xAF—Bits[6:0] New Data Flags
See Register 0x87 for a description.
0xBE—Bits[7:0] Reserved
0xBF—Bits[6:0] New Data Flags
See Register 0x87 for a description.
0xC0—Bits[7:0] Audio Content Protection Packet (ACP
Type)
0xB0—Bits[7:0] PD13
0xB1—Bits[7:0] PD14
These bits define which audio content protection is used.
0xB2—Bits[7:0] PD15
Table 36.
0xB3—Bits[7:0] PD16
Code
ACP Type
0xB4—Bits[7:0] Source Device Information Code
These bytes classify the source device.
0x00
0x01
0x02
0x03
Generic audio
IEC 60958-identified audio
DVD-audio
Reserved for super audio CD (SACD)
Reserved
Table 34.
SDI Code
0x00
0x01
0x02
0x03
0x04
0x05
0x06
0x07
0x08
0x09
Source
Unknown
Digital STB
DVD
D-VHS
HDD video
DVC
DSC
Video CD
Game
0x04—0xFF
0xC1—ACP Packet Byte 0 (ACP_PB0)
0xC2—Bits[7:0] ACP_PB1
0xC3—Bits[7:0] ACP_PB2
0xC4—Bits[7:0] ACP_PB3
0xC5—Bits[7:0] ACP_PB4
0xC7—Bits[6:0] New Data Flags
See Register 0x87 for a description.
PC general
0xC8—Bit[7] International Standard Recording Code
(ISRC1) Continued
0xB7—Bits[6:0] New Data Flags
See Register 0x87 for a description.
This bit indicates that a continuation of the 16 ISRC1 packet
bytes (an ISRC2 packet) is being transmitted.
0xB8—Bits[7:0] MPEG Source Infoframe Version
0xB9—Bits[7:0] MPEG Bit Rate Byte 0 (MB0)
0xC8—Bit[6] ISRC1 Valid
This is the lower 8 bits of 32 bits that specify the MPEG bit rate
in Hz.
This bit is an indication of the whether ISRC1 packet bytes are
valid. 0 = ISRC1 status bits and PBs not valid. 1 = ISRC1 status
bits and PBs valid.
0xBA—Bits[7:0] MB1
0xC8] 2:0] ISRC Status
0xBB—Bits[7:0] MB2
These bits define where in the ISRC track the samples are: at
least two transmissions of 001 occur at the beginning of the
track, while continuous transmission of 010 occurs in the
middle of the track, followed by at least two transmissions of
100 near the end of the track.
0xBC—Bits[7:0] MB3—Upper Byte
Rev. 0 | Page 34 of 44
AD9398
0xC9—Bits[7:0] ISRC1 Packet Byte 0 (ISRC1_PB0)
0xCA—Bits[7:0] ISRC1_PB1
0xDD—Bits[7:0] ISRC2_PB1
0xDE—Bits[7:0] ISRC2_PB2
0xDF—Bits[6:0] New Data Flags
See Register 0x87 for a description.
0xCB—Bits[7:0] ISRC1_PB2
0xCC—Bits[7:0] ISRC1_PB3
0xCD—Bits[7:0] ISRC1_PB4
0xE0—Bits[7:0] ISRC2_PB3
0xE1—Bits[7:0] ISRC2_PB4
0xE2—Bits[7:0] ISRC2_PB5
0xE3—Bits[7:0] ISRC2_PB6
0xE4—Bits[7:0] ISRC2_PB7
0xE5—Bits[7:0] ISRC2_PB8
0xE6—Bits[7:0] ISRC2_PB9
0xE7—Bits[6:0] New Data Flags
See Register 0x87 for a description.
0xCE—Bits[7:0] ISRC1_PB5
0xCF—Bits[6:0] New Data Flags
See Register 0x87 for a description.
0xD0—Bits[7:0] ISRC1_PB6
0xD1—Bits[7:0] ISRC1_PB7
0xD2—Bits[7:0] ISRC1_PB8
0xD3—Bits[7:0] ISRC1_PB9
0xD4—Bits[7:0] ISRC1_PB10
0xD5—Bits[7:0] ISRC1_PB11
0xD6—Bits[7:0] ISRC1_PB12
0xD7—Bits[6:0] New Data Flags
See Register 0x87 for a description.
0xE8—Bits[7:0] ISRC2_PB10
0xE9—Bits[7:0] ISRC2_PB11
0xEA—Bits[7:0] ISRC2_PB12
0xEB—Bits[7:0] ISRC2_PB13
0xEC—Bits[7:0] ISRC2_PB14
0xED—Bits[7:0] ISRC2_PB15
0xEE—Bits[7:0] ISRC2_PB16
0xD8—Bits[7:0] ISRC1_PB13
0xD9—Bits[7:0] ISRC1_PB14
0xDA—Bits[7:0] ISRC1_PB15
0xDB—Bits[7:0] ISRC1_PB16
0xDC—Bits[7:0] ISRC2 Packet Byte 0 (ISRC2_PB0)
This is transmitted only when the ISRC continue bit
(Register 0xC8 Bit 7) is set to 1.
Rev. 0 | Page 35 of 44
AD9398
DATA TRANSFER VIA SERIAL INTERFACE
2-WIRE SERIAL CONTROL PORT
For each byte of data read or written, the MSB is the first bit of
the sequence.
A 2-wire serial interface control interface is provided in the
AD9398. Up to two AD9398 devices can be connected to the
2-wire serial interface, with a unique address for each device.
If the AD9398 does not acknowledge the master device during a
write sequence, the SDA remains high so the master can gener-
ate a stop signal. If the master device does not acknowledge the
AD9398 during a read sequence, the AD9398 interprets this as
the end of data. The SDA remains high, so the master can
generate a stop signal.
The 2-wire serial interface comprises a clock (SCL) and a
bidirectional data (SDA) pin. The analog flat panel interface
acts as a slave for receiving and transmitting data over the serial
interface. When the serial interface is not active, the logic levels
on SCL and SDA are pulled high by external pull-up resistors.
To write data to specific control registers of the AD9398, the 8-
bit address of the control register of interest must be written
after the slave address has been established. This control register
address is the base address for subsequent write operations. The
base address auto-increments by 1 for each byte of data written
after the data byte intended for the base address. If more bytes
are transferred than there are available addresses, the address
does not increment and remains at its maximum value. Any
base address higher than the maximum value does not produce
an acknowledge signal.
Data received or transmitted on the SDA line must be stable for
the duration of the positive-going SCL pulse. Data on SDA must
change only when SCL is low. If SDA changes state while SCL is
high, the serial interface interprets that action as a start or stop
sequence.
There are six components to serial bus operation:
•
•
•
•
•
•
Start signal
Slave address byte
Base register address byte
Data byte to read or write
Stop signal
Data are read from the control registers of the AD9398 in a
similar manner. Reading requires two data transfer operations:
Acknowledge (Ack)
•
The base address must be written with the R/W bit of the
slave address byte low to set up a sequential read
operation.
When the serial interface is inactive (SCL and SDA are high),
communications are initiated by sending a start signal. The start
signal is a high-to-low transition on SDA while SCL is high.
This signal alerts all slave devices that a data transfer sequence
is coming.
•
Reading (the R/ bit of the slave address byte high) begins
W
at the previously established base address. The address of
the read register auto-increments after each byte is
transferred.
The first 8 bits of data transferred after a start signal comprise a
7-bit slave address (the first 7 bits) and a single R/ bit (the 8th
W
To terminate a read/write sequence to the AD9398, a stop signal
must be sent. A stop signal comprises a low-to-high transition
of SDA while SCL is high.
bit). The R/ bit indicates the direction of data transfer, read
W
from (1) or write to (0) the slave device. If the transmitted slave
address matches the address of the device (set by the state of the
SA0 input pin as shown in Table 37), the AD9398 acknowledges
by bringing SDA low on the 9th SCL pulse. If the addresses do
not match, the AD9398 does not acknowledge.
A repeated start signal occurs when the master device driving
the serial interface generates a start signal without first genera-
ting a stop signal to terminate the current communication. This
is used to change the mode of communication (read, write)
between the slave and master without releasing the serial
interface lines.
Table 37. Serial Port Addresses
Bit 7
A6 (MSB)
1
Bit 6
Bit 5
Bit 4
Bit 3
A2
1
Bit 2
A1
0
Bit 1
A0
0
A5
0
A4
0
A3
1
SDA
tBUFF
tSTAH
tDSU
tDHO
tSTOSU
tSTASU
tDAL
SCL
tDAH
Figure 9. Serial Port Read/Write Timing
Rev. 0 | Page 36 of 44
AD9398
SERIAL INTERFACE READ/WRITE EXAMPLES
Write to one control register:
Read from one control register:
•
•
•
•
•
Start signal
•
•
•
•
•
•
•
Start signal
W
Slave address byte (R/ bit = low)
W
Slave address byte (R/ bit = low)
Base address byte
Base address byte
Data byte to base address
Stop signal
Start signal
W
Slave address byte (R/ bit = high)
Data byte from base address
Stop signal
Write to four consecutive control registers:
•
•
•
•
•
•
•
•
Start signal
W
Slave address byte (R/ bit = LOW)
Base address byte
Read from four consecutive control registers:
•
•
•
•
•
•
•
•
•
•
Start signal
Data byte to base address
Data byte to (base address + 1)
Data byte to (base address + 2)
Data byte to (base address + 3)
Stop signal
W
Slave address byte (R/ bit = low)
Base address byte
Start signal
W
Slave address byte (R/ bit = high)
Data byte from base address
Data byte from (base address + 1)
Data byte from (base address + 2)
Data byte from (base address + 3)
Stop signal
SDA
SCL
BIT 7 BIT 6
BIT 5 BIT 4 BIT 3 BIT 2 BIT 1 BIT 0
ACK
Figure 10. Serial Interface—Typical Byte Transfer
Rev. 0 | Page 37 of 44
AD9398
PCB LAYOUT RECOMMENDATIONS
The AD9398 is a high precision, high speed digital device. To
achieve the maximum performance from the part, it is impor-
tant to have a well designed board. The following is a guide for
designing a board using the AD9398.
In some cases, using separate ground planes is unavoidable;
therefore, it is recommended to place a single ground plane
under the AD9398. The location of the split should be at the
receiver of the digital outputs. In this case, it is even more
important to place components wisely because the current
loops are much longer (current takes the path of least
resistance). An example of a current loop is: power plane to
AD9398 to digital output trace to digital data receiver to digital
ground plane to analog ground plane .
POWER SUPPLY BYPASSING
It is recommended to bypass each power supply pin with a
0.1 μF capacitor. The exception is in the case where two or more
supply pins are adjacent to each other. For these groupings of
powers/grounds, it is only necessary to have one bypass
capacitor. The fundamental idea is to have a bypass capacitor
within about 0.5 cm of each power pin. Also, avoid placing the
capacitor on the opposite side of the PC board from the
AD9398, since that interposes resistive vias in the path.
OUTPUTS (BOTH DATA AND CLOCKS)
Try to minimize the trace length that the digital outputs have to
drive. Longer traces have higher capacitance requiring more
current that causes more internal digital noise.
The bypass capacitors should be physically located between the
power plane and the power pin. Current should flow from the
power plane to the capacitor to the power pin. Do not make the
power connection between the capacitor and the power pin.
Placing a via underneath the capacitor pads down to the power
plane is generally the best approach.
Shorter traces reduce the possibility of reflections.
Adding a 50 Ω to 200 Ω series resistor suppresses reflections,
reduces EMI, and reduces the current spikes inside the AD9398.
If series resistors are used, place them as close as possible to the
AD9398 pins (although try not to add vias or extra length to the
output trace to move the resistors closer).
It is particularly important to maintain low noise and good
stability of PVDD (the clock generator supply). Abrupt changes
in PVDD can result in similarly abrupt changes in sampling clock
phase and frequency. This can be avoided by careful attention to
regulation, filtering, and bypassing. It is highly desirable to
provide separate regulated supplies for each of the analog
circuitry groups (VD and PVDD).
If possible, limit the capacitance that each of the digital outputs
drives to less than 10 pF. This is easily accomplished by keeping
traces short and connecting the outputs to only one device.
Loading the outputs with excessive capacitance increases the
current transients inside the AD9398 and creates more digital
noise on its power supplies.
DIGITAL INPUTS
Some graphic controllers use substantially different levels of
power when active (during active picture time) and when idle
(during HSYNC and VSYNC periods). This can result in a
measurable change in the voltage supplied to the analog supply
regulator, which can in turn produce changes in the regulated
analog supply voltage. This is mitigated by regulating the analog
supply, or at least PVDD, from a different, cleaner power source
(for example, from a 12 V supply).
The digital inputs on the AD9398 are designed to work with
3.3 V signals, but tolerate 5.0 V signals. Therefore, no extra
components need to be added if using 5.0 V logic.
Any noise that enters the HSYNC input trace adds jitter to the
system. Therefore, minimize the trace length and do not run
any digital or other high frequency traces near it.
It is recommended to use a single ground plane for the entire
board. Experience has repeatedly shown that noise performance
is the same or better with a single ground plane. Using multiple
ground planes is detrimental because each separate ground
plane is smaller, resulting in long ground loops.
Rev. 0 | Page 38 of 44
AD9398
COLOR SPACE CONVERTER (CSC) COMMON SETTINGS
Table 38. HDTV YCrCb (0 to 255) to RGB (0 to 255) (Default Setting for AD9398)
Register
Address
Value
Red/Cr Coeff 1
Red/Cr Coeff 2
Red/Cr Coeff 3
Red/Cr Offset
0x35
0x0C
0x36
0x52
0x37
0x08
0x38
0x00
0x39
0x00
0x3A
0x00
0x3B
0x19
0x3C
0xD7
Register
Address
Value
Green/Y Coeff 1
0x3E
Green/Y Coeff 2
0x40
Green/Y Coeff 3
0x42
Green/Y Offset
0x44
0x3D
0x1C
0x3F
0x08
0x41
0x3E
0x43
0x02
0x54
0x00
0x89
0x91
Register
Address
Value
Blue/Cb Coeff 1
0x46
Blue/Cb Coeff 2
0x48
Blue/Cb Coeff 3
0x4A
Blue/Cb Offset
0x4C
0x45
0x00
0x47
0x08
0x49
0x0E
0x4B
0x18
0x00
0x00
0x87
0xBD
Table 39. HDTV YCrCb (16 to 235) to RGB (0 to 255)
Register
Address
Value
Red/Cr Coeff 1
Red/Cr Coeff 2
Red/Cr Coeff 3
0x3A
Red/Cr Offset
0x3C
0x35
0x47
0x36
0x2C
0x37
0x04
0x38
0xA8
0x39
0x00
0x3B
0x1C
0x00
0x1F
Register
Address
Value
Green/Y Coeff 1
0x3E
Green/Y Coeff 2
0x40
Green/Y Coeff 3
0x42
Green/Y Offset
0x44
0x3D
0x1D
0x3F
0x04
0x41
0x1F
0x43
0x01
0xDD
0xA8
0x26
0x34
Register
Address
Value
Blue/Cb Coeff 1
0x46
Blue/Cb Coeff 2
0x48
Blue/Cb Coeff 3
0x4A
Blue/Cb Offset
0x4C
0x45
0x00
0x47
0x04
0x49
0x08
0x4B
0x1B
0x00
0xA8
0x 75
0x7B
Table 40. SDTV YCrCb (0 to 255) to RGB (0 to 255)
Register
Address
Value
Red/Cr Coeff 1
Red/Cr Coeff 2
Red/Cr Coeff 3
0x3A
Red/Cr Offset
0x3C
0x35
0x2A
0x36
0xF8
0x37
0x08
0x38
0x00
0x39
0x00
0x3B
0x1A
0x00
0x84
Register
Address
Value
Green/Y Coeff 1
0x3E
Green/Y Coeff 2
0x40
Green/Y Coeff 3
0x42
Green/Y Offset
0x44
0x3D
0x1A
0x3F
0x08
0x41
0x1D
0x43
0x04
0x6A
0x00
0x50
0x23
Register
Address
Value
Blue/Cb Coeff. 1
0x46
Blue/Cb Coeff 2
0x48
Blue/Cb Coeff 3
0x4A
Blue/Cb Offset
0x4C
0x45
0x00
0x47
0x08
0x49
0x0D
0x4B
0x19
0x00
0x00
0xDB
0x12
Table 41. SDTV YCrCb (16 to 235) to RGB (0 to 255)
Register
Address
Value
Red/Cr Coeff 1
Red/Cr Coeff 2
Red/Cr Coeff 3
0x3A
Red/Cr Offset
0x3C
0x35
0x46
0x36
0x63
0x37
0x04
0x38
0xA8
0x39
0x00
0x3B
0x1C
0x00
0x84
Register
Address
Value
Green/Y Coeff 1
0x3E
Green/Y Coeff 2
0x40
Green/Y Coeff 3
0x42
Green/Y Offset
0x44
0x3D
0x1C
0x3F
0x04
0x41
0x1E
0x43
0x02
0xC0
0xA8
0x6F
0x1E
Register
Address
Value
Blue/Cb Coeff 1
0x46
Blue/Cb Coeff 2
0x48
Blue/Cb Coeff 3
0x4A
Blue/Cb Offset
0x4C
0x45
0x00
0x47
0x04
0x49
0x08
0x4B
0x1B
0x00
0xA8
0x11
0xAD
Rev. 0 | Page 39 of 44
AD9398
Table 42. RGB (0 to 255) to HDTV YCrCb (0 to 255)
Register
Address
Value
Red/Cr Coeff 1
Red/Cr Coeff 2
Red/Cr Coeff
0x3A
Red/Cr Offset
0x3C
0x35
0x08
0x36
0x2D
0x37
0x18
0x38
0x93
0x39
0x1F
0x3B
0x08
0x3F
0x00
Register
Address
Value
Green/Y Coeff 1
0x3E
Green/Y Coeff 2
0x40
Green/Y Coeff 3
0x42
Green/Y Offset
0x44
0x3D
0x03
0x3F
0x0B
0x41
0x01
0x43
0x00
0x68
0x71
0x27
0x00
Register
Address
Value
Blue/Cb Coeff 1
0x46
Blue/Cb Coeff 2
0x48
Blue/Cb Coeff 3
0x4A
Blue/Cb Offset
0x4C
0x45
0x1E
0x47
0x19
0x49
0x08
0x4B
0x08
0x21
0xB2
0x2D
0x00
Table 43. RGB (0 to 255) to HDTV YCrCb (16 to 235)
Register
Address
Value
Red/Cr Coeff 1
Red/Cr Coeff 2
Red/Cr Coeff 3
0x3A
Red/Cr Offset
0x3C
0x35
0x07
0x36
0x06
0x37
0x19
0x38
0xA0
0x39
0x1F
0x3B
0x08
0x5B
0x00
Register
Address
Value
Green/Y Coeff 1
0x3E
Green/Y Coeff 2
0x40
Green/Y Coeff 3
0x42
Green/Y Offset
0x44
0x3D
0x02
0x3F
0x09
0x41
0x00
0x43
0x01
0xED
0xD3
0xFD
0x00
Register
Address
Value
Blue/Cb Coeff 1
0x46
Blue/Cb Coeff 2
0x48
Blue/Cb Coeff 3
0x4A
Blue/Cb Offset
0x4C
0x45
0x1E
0x47
0x1A
0x49
0x07
0x4B
0x08
0x64
0x96
0x06
0x00
Table 44. RGB (0 to 255) to SDTV YCrCb (0 to 255)
Register
Address
Value
Red/Cr Coeff 1
Red/Cr Coeff 2
Red/Cr Coeff 3
0x3A
Red/Cr Offset
0x3C
0x35
0x08
0x36
0x2D
0x37
0x19
0x38
0x27
0x39
0x1E
0x3B
0x08
0xAC
0x00
Register
Address
Value
Green/Y Coeff 1
0x3E
Green/Y Coeff 2
0x40
Green/Y Coeff 3
0x42
Green/Y Offset
0x44
0x3D
0x04
0x3F
0x09
0x41
0x01
0x43
0x00
0xC9
0x64
0xD3
0x00
Register
Address
Value
Blue/Cb Coeff 1
0x46
Blue/Cb Coeff 2
0x48
Blue/Cb Coeff 3
0x4A
Blue/Cb Offset
0x4C
0x45
0x1D
0x47
0x1A
0x49
0x08
0x4B
0x08
0x3F
0x93
0x2D
0x00
Table 45. RGB (0 to 255) to SDTV YCrCb (16 to 235)
Register
Address
Value
Red/Cr Coeff 1
Red/Cr Coeff 2
Red/Cr Coeff 3
0x3A
Red/Cr Offset
0x3C
0x35
0x07
0x36
0x06
0x37
0x1A
0x38
0x1E
0x39
0x1E
0x3B
0x08
0xDC
0x00
Register
Address
Value
Green/Y Coeff 1
0x3E
Green/Y Coeff 2
0x40
Green/Y Coeff 3
0x42
Green/Y Offset
0x44
0x3D
0x04
0x3F
0x08
0x41
0x01
0x43
0x01
0x1C
0x11
0x91
0x00
Register
Address
Value
Blue/Cb Coeff 1
0x46
Blue/Cb Coeff 2
0x48
Blue/Cb Coeff 3
0x4A
Blue/Cb Offset
0x4C
0x45
0x1D
0x47
0x1B
0x49
0x07
0x4B
0x08
0xA3
0x57
0x06
0x00
Rev. 0 | Page 40 of 44
AD9398
OUTLINE DIMENSIONS
16.00
BSC SQ
1.60 MAX
0.75
0.60
0.45
100
1
76
75
PIN 1
14.00
BSC SQ
TOP VIEW
(PINS DOWN)
1.45
1.40
1.35
0.20
0.09
7°
3.5°
0°
0.08 MAX
COPLANARITY
25
51
50
0.15
0.05
26
SEATING
PLANE
0.27
0.22
0.17
VIEW A
0.50
BSC
LEAD PITCH
VIEW A
ROTATED 90° CCW
COMPLIANT TO JEDEC STANDARDS MS-026-BED
Figure 11. 100-Lead Low Profile Quad Flat Package [LQFP]
(ST-100)
Dimensions shown in millimeters
ORDERING GUIDE
Max Speed (MHz)
Temperature
Package
Option
ST-100
Model
Analog Digital
Range
Package Description
AD9398KSTZ-1001
AD9398KSTZ-150
AD9398/PCB
100
150
100
150
0°C to 70°C
0°C to 70°C
100-Lead Low Profile Quad Flat Package (LQFP)
100-Lead Low Profile Quad Flat Package (LQFP)
Evaluation Board
ST-100
1 Z = Pb-free part.
Rev. 0 | Page 41 of 44
AD9398
NOTES
Rev. 0 | Page 42 of 44
AD9398
NOTES
Rev. 0 | Page 43 of 44
AD9398
NOTES
©
2005 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D05678-0-10/05(0)
Rev. 0 | Page 44 of 44
相关型号:
AD9410BSQZ
IC 1-CH 10-BIT FLASH METHOD ADC, PARALLEL ACCESS, PQFP80, POWER, HEAT SINK, PLASTIC, LQFP-80, Analog to Digital Converter
ADI
AD9411BSVZ-170
1-CH 10-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, PQFP100, PLASTIC, MS-026AED-HD, TQFP-100
ROCHESTER
©2020 ICPDF网 联系我们和版权申明