ADM6384YKSZ48D3-RL7 [ADI]
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4, LEAD FREE, EIAJ, SC-82, SC-70, 4 PIN;
| 型号： | ADM6384YKSZ48D3-RL7 |
| 厂家： | 
ADI |
| 描述： | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4, LEAD FREE, EIAJ, SC-82, SC-70, 4 PIN 输入元件 光电二极管 |
| 文件： | 总12页 (文件大小：197K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Microprocessor Supervisory
Circuit in 4-Lead SC70
ADM6384
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
Precision power supply monitoring
31 reset threshold options: 1.58 V to 5.0 V
Four reset timeouts: 1 ms, 20 ms, 140 ms, and 1120 ms
Manual reset input
Reset output stage
Push-pull active-low
ADM6384
V
CC
RESET
GENERATOR
RESET
GND
V
REF
Guaranteed reset output valid to VCC = 1 V
Power supply glitch immunity
MR
DEBOUNCE
Specified over the −40°C to +125°C temperature range
4-lead SC70 package
Figure 1.
APPLICATIONS
Microprocessor systems
Computers
Controllers
V
V
CC
CC
Intelligent instruments
Portable equipment
ADM6384
MICROPROCESSOR
RESET
MR
RESET
100kΩ
GENERAL DESCRIPTION
GND
GND
The ADM6384 is a supervisory circuit that monitors power supply
voltage levels in microprocessor-based systems. A power-on reset
signal is generated when the supply voltage rises to a preset
threshold level. The debounced manual reset input of the
ADM6384 can be used to initiate a reset by means of an external
push button or logic signal.
Figure 2.
The part is available in a choice of 31 reset threshold options,
from 1.58 V to 5.0 V. The minimum reset timeout periods are
1 ms, 20 ms, 140 ms, and 1120 ms.
The ADM6384 is available in a 4-lead SC70 package and typi-
cally consumes only 7 µA, making it suitable for use in low
power, portable applications.
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ©2005–2011 Analog Devices, Inc. All rights reserved.
ADM6384
TABLE OF CONTENTS
Features .............................................................................................. 1
Typical Performance Characteristics ..............................................7
Circuit Description............................................................................9
Reset Output ..................................................................................9
Manual Reset Input.......................................................................9
Applications Information.............................................................. 10
Negative-Going VCC Transients................................................ 10
Ensuring Reset Valid to VCC = 0 V........................................... 10
Outline Dimensions....................................................................... 11
Ordering Guide .......................................................................... 11
Applications....................................................................................... 1
General Description......................................................................... 1
Functional Block Diagrams............................................................. 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Absolute Maximum Ratings............................................................ 5
ESD Caution.................................................................................. 5
Pin Configuration and Function Descriptions............................. 6
REVISION HISTORY
4/11—Rev. B to Rev. C
Updated Outline Dimensions....................................................... 11
Changes to Ordering Guide .......................................................... 11
7/08—Rev. A to Rev. B
Changes to Figure 5, Figure 8, and Figure 9.................................. 7
Changes to Figure 10........................................................................ 8
Changes to Figure 15...................................................................... 11
Changes to Ordering Guide .......................................................... 11
1/07—Rev. 0 to Rev. A
Updated Format..................................................................Universal
Changes to Specifications Table...................................................... 3
Updated Outline Dimensions....................................................... 11
Changes to Ordering Guide .......................................................... 11
7/05—Revision 0: Initial Version
Rev. C | Page 2 of 12
ADM6384
SPECIFICATIONS
VCC = full operating range, TA = −40°C to +125°C, unless otherwise noted.
Table 1.
Parameter
Min
Typ
Max
Unit
Test Conditions/Comments
SUPPLY
VCC Operating Voltage Range
Supply Current
1
5.5
13
11
7
V
7
6
4
3
µA
µA
µA
µA
VCC = 5.5 V, no load
VCC = 3.6 V, no load
VCC = 2.5 V, no load1
VCC = 1.8 V, no load1
6
RESET THRESHOLD VOLTAGE
ADM6384x50x
ADM6384x49x
ADM6384x48x
ADM6384x47x
ADM6384x46x
ADM6384x45x
ADM6384x44x
ADM6384x43x
ADM6384x42x
ADM6384x41x
ADM6384x40x
ADM6384x39x
ADM6384x38x
ADM6384x37x
ADM6384x36x
ADM6384x35x
ADM6384x34x
ADM6384x33x
ADM6384x32x
ADM6384x31x
ADM6384x30x
ADM6384x29x
ADM6384x28x
ADM6384x27x
ADM6384x26x
ADM6384x25x
ADM6384x24x
ADM6384x23x
ADM6384x22x
ADM6384x17x
ADM6384x16x
RESET THRESHOLD TEMPERATURE COEFFICIENT
VCC to Reset Delay
4.88
4.78
4.68
4.58
4.51
4.39
4.27
4.19
4.1
5.00
4.90
4.80
4.70
4.63
4.5
4.38
4.30
4.2
4.1
4.0
3.9
3.8
3.7
3.6
3.5
3.4
3.3
3.2
3.08
3.0
2.93
2.8
5.12
5.02
4.92
4.82
4.74
4.61
4.48
4.41
4.31
4.2
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
4.0
3.9
3.8
4.1
4.0
3.9
3.71
3.61
3.51
3.41
3.32
3.22
3.12
3.00
2.93
2.85
2.73
2.63
2.56
2.44
2.34
2.26
2.13
1.62
1.54
3.79
3.69
3.59
3.49
3.38
3.28
3.15
3.08
3.00
2.87
2.77
2.69
2.56
2.46
2.37
2.24
1.71
1.61
2.70
2.63
2.5
2.4
2.31
2.19
1.67
1.58
60
ppm/°C
µs
35
VCC falling at 10 mV/µs from VTH
100 mV to VTH − 100 mV
+
RESET THRESHOLD HYSTERESIS
RESET TIMEOUT PERIOD
ADM6384xxD1
ADM6384xxD2
ADM6384xxD3
2 × VTH
mV
1
20
140
1120
2
40
280
2240
ms
ms
ms
ms
ADM6384xxD4
Rev. C | Page 3 of 12
ADM6384
Parameter
Min
Typ
Max
Unit
Test Conditions/Comments
MANUAL RESET INPUT
MR Input Threshold
VIL
0.3 × VCC
0.8
V
V
V
V
µs
ns
kV
ns
VCC < 4 V
VCC > 4 V
VCC < 4 V
VCC > 4 V
VIH
0.7 × VCC
2.4
1
MR Input Pulse Width
MR Glitch Rejection
MR Pull-Up Resistance
MR to Reset Delay
RESET OUTPUT VOLTAGE
VOL
100
63
32
100
200
0.3
0.3
0.4
V
V
V
V
V
VCC ≥ 1.0 V, ISINK = 80 µA
VCC ≥ 2.5 V, ISINK = 1.2 mA
VCC ≥ 4.5 V, ISINK = 3.2 mA
VCC ≥ 2.5 V, ISOURCE = 500 µA
VCC ≥ 4.5 V, I SOURCE = 800 µA
VOH
0.8 × VCC
0.8 × VCC
1 TA = 25°C only.
Rev. C | Page 4 of 12
ADM6384
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Table 2.
Parameter
Rating
VCC
RESET
−0.3 V to +6 V
−0.3 V to +6 V
20 mA
Output Current (RESET)
Operating Temperature Range
Storage Temperature Range
θJA Thermal Impedance, SC70
Soldering Temperature
Sn/Pb
−40°C to +125°C
−65°C to +150°C
331°C/W
ESD CAUTION
240°C, 30 sec
260°C, 40 sec
Pb-Free
Rev. C | Page 5 of 12
ADM6384
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
1
GND
4
V
CC
ADM6384
TOP VIEW
(Not to Scale)
2
3
RESET
MR
Figure 3. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
Mnemonic
Description
1
2
GND
RESET
Ground.
Active-Low Reset Output. This is an active-low output that is asserted whenever VCC is
below the reset threshold (VTH). It features a push-pull output stage.
3
4
MR
VCC
Manual Reset Input. This is an active-low input that, when forced low for at least 1 µs,
generates a reset. It features a 52 kV internal pull-up.
Power Supply Voltage Being Monitored.
Rev. C | Page 6 of 12
ADM6384
TYPICAL PERFORMANCE CHARACTERISTICS
10.0
9.5
1.05
1.04
1.03
1.02
1.01
1.00
0.99
0.98
0.97
0.96
0.95
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
V
= 5V
CC
V
= 3.3V
CC
V
= 1.5V
CC
–40
–20
0
20
40
60
80
100
120
–40
–20
0
20
40
60
80
100
120
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 4. Supply Current vs. Temperature
Figure 7. Normalized Reset Threshold vs. Temperature
1.20
1.15
1.10
1.05
1.00
0.95
0.90
0.85
0.80
0.20
V
CC
= 2.9V
0.15
0.10
0.05
0
–40
–20
0
20
40
60
80
100
120
0
1
2
3
4
5
6
7
TEMPERATURE (°C)
I
(mA)
SINK
Figure 5. Normalized Reset Timeout Period vs. Temperature
Figure 8. Output Voltage Low vs. ISINK
2.92
2.90
2.88
2.86
2.84
2.82
100
V
CC
= 2.9V
90
80
70
60
50
40
30
20
10
0
0
0.2
0.4
I
0.6
(mA)
0.8
1.0
–40
–20
0
20
40
60
80
100
120
TEMPERATURE (°C)
SOURCE
Figure 9. Output Voltage High vs. ISOURCE
Figure 6. VCC to Reset Output Delay vs. Temperature
Rev. C | Page 7 of 12
ADM6384
160
140
120
RESET OCCURS ABOVE CURVE
340
320
300
280
260
240
220
200
180
160
140
120
100
V
= 3.3V
CC
100
V
= 4.63V
TH
80
60
40
V
= 5V
CC
20
V
= 2.93V
TH
0
10
100
1000
–40
–20
0
20
40
60
80
100
120
OVERDRIVE V
(mV)
TEMPERATURE (°C)
OD
Figure 10. Maximum VCC Transient Duration vs. Reset Threshold Overdrive
Figure 11. Manual Reset Minimum Pulse Width vs. Temperature
Rev. C | Page 8 of 12
ADM6384
CIRCUIT DESCRIPTION
The ADM6384 provides microprocessor supply voltage supervi-
sion by controlling the microprocessor reset input. Code execution
errors are avoided during power-up, power-down, and brownout
conditions by asserting a reset signal when the supply voltage is
below a preset threshold. In addition, the ADM6384 allows
supply voltage stabilization with a fixed timeout before the reset
deasserts after the supply voltage rises above the threshold. If the
user detects a problem with the system operation, a manual reset
input is available to reset the microprocessor by means of an
external push-button, for example.
V
CC
V
V
TH
TH
V
CC
1V
0V
V
CC
RESET
tRP
tRD
0V
Figure 12. Reset Timing Diagram
MANUAL RESET INPUT
MR
The ADM6384 features a manual reset input (
driven low, asserts the reset output. When
) that, when
MR
transitions from
low to high, reset remains asserted for the duration of the reset
MR
RESET OUTPUT
active timeout period before deasserting. The
input has a
The ADM6384 features an active-low, push-pull reset output.
The reset signal is guaranteed to be logic low for VCC down to 1 V.
52 kΩ internal pull-up so that the input is always high when
unconnected. An external push-button switch can be connected
MR
between
Debounce circuitry for this purpose is integrated on-chip. Noise
MR
and ground so that the user can generate a reset.
The reset output is asserted when VCC is below the reset threshold
MR
(VTH) or when
duration of the reset active timeout period (tRP) after VCC rises
MR
is driven low. Reset remains asserted for the
immunity is provided on the
transients of up to 100 ns (typical) are ignored. A 0.1 µF capacitor
MR
input, and fast, negative-going
above the reset threshold or after
transitions from low to high.
between
and ground provides additional noise immunity.
Figure 12 illustrates the behavior of the reset outputs.
Rev. C | Page 9 of 12
ADM6384
APPLICATIONS INFORMATION
NEGATIVE-GOING VCC TRANSIENTS
ENSURING RESET VALID TO VCC = 0 V
To avoid unnecessary resets caused by fast power supply tran-
sients, the ADM6384 is equipped with glitch rejection circuitry.
The typical performance characteristic shown in Figure 10 plots
Both active-low and active-high reset outputs are guaranteed to
be valid for VCC as low as 1 V. However, by using an external
resistor with push-pull configured reset outputs, valid outputs
for VCC as low as 0 V are possible. For an active-low reset out-
V
CC transient duration vs. the transient magnitude. The curves
show combinations of transient magnitude and duration for which
a reset is not generated for 4.63 V and 2.93 V reset threshold
parts. For example, with the 2.93 V threshold, a transient that
goes 100 mV below the threshold and lasts 8 µs typically does not
cause a reset, but if the transient is any greater in magnitude or
duration, a reset is generated. An optional 0.1 µF bypass capacitor
mounted close to VCC provides additional glitch rejection.
RESET
put, a resistor connected between
and ground pulls the
output low when it is unable to sink current. A large resistance
such as 100 kΩ should be used to avoid overloading the reset
output when VCC is above 1 V.
V
CC
ADM6384
RESET
100kΩ
GND
Figure 13. Ensuring Reset Valid to VCC = 0 V
Rev. C | Page 10 of 12
ADM6384
OUTLINE DIMENSIONS
2.20
1.80
1.35
1.15
4
1
3
2.40
1.80
2
0.65 BSC
1.00
0.50 BSC
0.40
0.10
1.10
0.80
0.80
0.18
0.10
0.30
0.10
SEATING
PLANE
0.10 MAX
*
0.70
0.50
COPLANARITY
0.10
0.30
0.15
*
PACKAGE OUTLINE CORRESPONDS IN FULL TO EIAJ SC82
EXCEPT FOR WIDTH OF PIN 2 AS SHOWN.
Figure 14. 4-Lead Thin Shrink Small Outline Transistor Package [SC70]
(KS-4)
Dimensions shown in millimeters
ADM6384YKS x D x x -RL7
GENERIC NUMBER
ORDERING QUANTITY
RL7: 3,000 PIECE REEL
R7: 3,000 PIECE REEL RoHS COMPLIANT
TEMPERATURE RANGE
Y: –40°C TO +125°C
Z: RoHS COMPLIANT
PACKAGE CODE
KS: 4-LEAD SC70
RESET TIMEOUT PERIOD
1: 1ms (MIN)
2: 20ms (MIN)
RESET THRESHOLD NUMBER
(16 TO 50)
3: 140ms (MIN)
4: 1120ms (MIN)
Figure 15. Ordering Code Structure
ORDERING GUIDE
Reset
Threshold (V)
Reset
Temperature
Package
Description
Package
Option
Standard Models1, 2
Timeout (ms) Range
Quantity
Branding
N0R
N0R
N0R
N0R
N0R
N0R
N0R
N0R
ADM6384YKS23D3Z-R7
ADM6384YKS26D3Z-R7
ADM6384YKS29D1Z-R7
ADM6384YKS29D3Z-R7
ADM6384YKS31D1Z-R7
ADM6384YKS31D2Z-R7
ADM6384YKS34D2Z-R7
ADM6384YKS39D2Z-R7
ADM6384YKS45D3Z-R7
ADM6384YKS46D2Z-R7
2.31
2.63
2.93
2.93
3.08
3.08
3.4
3.9
4.5
4.63
140
140
1
140
1
20
20
20
140
20
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
3k
3k
3k
3k
3k
3k
3k
3k
3k
3k
4-Lead SC70
4-Lead SC70
4-Lead SC70
4-Lead SC70
4-Lead SC70
4-Lead SC70
4-Lead SC70
4-Lead SC70
4-Lead SC70
4-Lead SC70
KS-4
KS-4
KS-4
KS-4
KS-4
KS-4
KS-4
KS-4
KS-4
KS-4
N0R
N0R
1 If ordering nonstandard models, complete the ordering code shown in Figure 15 by inserting reset timeout and reset threshold suffixes. Contact sales for availability of
nonstandard models.
2 Z = RoHS Compliant Part.
Rev. C | Page 11 of 12
ADM6384
NOTES
©2005–2011 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D05305-0-4/11(C)
Rev. C | Page 12 of 12
相关型号：
ADM660AN
SWITCHED CAPACITOR CONVERTER, 120kHz SWITCHING FREQ-MAX, PDIP8, PLASTIC, MO-095AA, DIP-8
ROCHESTER
ADM660AR-REEL
IC SWITCHED CAPACITOR CONVERTER, 120 kHz SWITCHING FREQ-MAX, PDSO8, MS-012AA, SOIC-8, Switching Regulator or Controller
ADI
ADM660ARU
SWITCHED CAPACITOR CONVERTER, 120 kHz SWITCHING FREQ-MAX, PDSO16, MO-153AB, TSSOP-16
ROCHESTER
ADM660ARU-REEL
SWITCHED CAPACITOR CONVERTER, 120 kHz SWITCHING FREQ-MAX, PDSO16, MO-153AB, TSSOP-16
ROCHESTER
©2020 ICPDF网 联系我们和版权申明