ADRF5021BCCZN-R7 [ADI]
Silicon SPDT Switch;型号: | ADRF5021BCCZN-R7 |
厂家: | ADI |
描述: | Silicon SPDT Switch 光电二极管 |
文件: | 总12页 (文件大小:356K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
9 kHz to 30 GHz,
Silicon SPDT Switch
ADRF5021
Data Sheet
FEATURES
FUNCTIONAL BLOCK DIAGRAM
RF2
Ultrawideband frequency range: 9 kHz to 30 GHz
Nonreflective 50 Ω design
ADRF5021
VSS
Low insertion loss: 2.0 dB to 30 GHz
High isolation: 60 dB to 30 GHz
EN
50Ω
RFC
High input linearity
CTRL
1 dB power compression (P1dB): 28 dBm typical
Third-order intercept (IP3): 52 dBm typical
High power handling
50Ω
VDD
RF1
24 dBm through path
24 dBm terminated path
Figure 1.
ESD sensitivity: Class 1, 1 kV human body model (HBM)
20-terminal, 3 mm × 3 mm land grid array package
No low frequency spurious
Radio frequency (RF) settling time (to 0.1 dB of final RF
output): 6.2 µs
APPLICATIONS
Test instrumentation
Microwave radios and very small aperture terminals (VSATs)
Military radios, radars, electronic counter measures (ECMs)
Broadband telecommunications systems
GENERAL DESCRIPTION
The ADRF5021 is a general-purpose single-pole, double-throw
(SPDT) switch manufactured using a silicon process. It comes
in a 3 mm × 3 mm, 20-terminal land grid array (LGA) package
and provides high isolation and low insertion loss from 9 kHz
to 30 GHz.
This broadband switch requires dual supply voltages, +3.3 V
and −2.5 V, and provides CMOS/LVTTL logic-compatible
control.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2016–2017 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
ADRF5021
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Interface Schematics .....................................................................6
Typical Performance Characterics ..................................................7
Insertion Loss, Return Loss, and Isolation ................................7
Input Power Compression and Third-Order Intercept (IP3)..8
Theory of Operation .........................................................................9
Applications Information .............................................................. 10
Evaluation Board ........................................................................ 10
Probe Matrix Board ................................................................... 11
Outline Dimensions....................................................................... 12
Ordering Guide .......................................................................... 12
Applications....................................................................................... 1
Functional Block Diagram .............................................................. 1
General Description......................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Absolute Maximum Ratings............................................................ 5
Power Derating Curves................................................................ 5
ESD Caution.................................................................................. 5
Pin Configuration and Function Descriptions............................. 6
REVISION HISTORY
2/2017—Rev. 0 to Rev. A
Changed VEN = 3.3 V to 5 V to VEN = 0 V or 3.3 V to 5 V .......... 3
7/2016—Revision 0: Initial Version
Rev. A | Page 2 of 12
Data Sheet
ADRF5021
SPECIFICATIONS
VDD = 3.3 V to 5 V, VSS = −2.5 V, VCTRL = 0 V or 3.3 V to 5 V, VEN = 0 V or 3.3 V to 5 V, TCASE = 25°C, 50 Ω system, unless otherwise noted.
Table 1.
Parameter
Symbol
Test Conditions/Comments
Min
Typ Max
30,000
Unit
FREQUENCY RANGE
INSERTION LOSS
0.009
MHz
Between RFC and RF1/RF2
9 kHz to 10 GHz
10 GHz to 20 GHz
20 GHz to 30 GHz
1.1
1.4
2.0
dB
dB
dB
ISOLATION
Between RFC and RF1/RF2
9 kHz to 10 GHz
10 GHz to 20 GHz
20 GHz to 30 GHz
9 kHz to 10 GHz
10 GHz to 20 GHz
20 GHz to 30 GHz
65
60
60
70
65
60
dB
dB
dB
dB
dB
dB
Between RF1 and RF2
RETURN LOSS
RFC and RF1/RF2 (On)
9 kHz to 10 GHz
10 GHz to 20 GHz
20 GHz to- 30 GHz
9 kHz to 10 GHz
10 GHz to 20 GHz
20 GHz to 30 GHz
23
17
13
30
18
8
dB
dB
dB
dB
dB
dB
RF1/RF2 (Off)
SWITCHING
Rise and Fall Time
On and Off Time
RF Settling Time
0.1 dB
tRISE, tFALL
tON, tOFF
10% to 90% of RF output
50% VCTL to 90% of RF output
1.0
1.1
µs
µs
50% VCTL to 0.1 dB of final RF output
50% VCTL to 0.05 dB of final RF output
1 MHz to 30 GHz
6.2
10
µs
µs
0.05 dB
INPUT LINEARITY1
Power Compression
0.1 dB
P0.1dB
P1dB
IP3
27
28
52
dBm
dBm
dBm
1 dB
Third-Order Intercept
Two-tone input power = 14 dBm each tone,
Δf = 1 MHz
SUPPLY CURRENT
Positive
VDD, VSS pins
VDD = 3.3 V
VDD = 5 V
VSS = −2.5 V
CTRL, EN pins
IDD
ISS
80
100
<1
300
600
10
µA
µA
µA
Negative
DIGITAL CONTROL INPUTS
Voltage
Low
VINL
VINH
VDD = 3.3 V
VDD = 5 V
VDD = 3.3 V
VDD = 5 V
0
0.8
0.9
3.3
5.0
V
V
V
V
High
1.2
1.7
Current
Low and High
IINL, IINH
<1
µA
Rev. A | Page 3 of 12
ADRF5021
Data Sheet
Parameter
Symbol
Test Conditions/Comments
Min
Typ Max
Unit
RECOMMENDED OPERATING CONDITONS
Supply Voltage
Positive
Negative
Digital Control Voltage
RF Input Power2
Through Path
VDD
VSS
VCTL
PIN
3.0
−2.75
0
5.4
−2.25
VDD
V
V
V
f = 1 MHz to 30 GHz, TCASE = 85°C
RF signal is applied to RFC or through
connected RF1/RF2
24
dBm
Terminated Path
Hot Switching
RF signal is applied to terminated RF1/RF2
RF signal is present at RFC while switching
between RF1 and RF2
24
18
dBm
dBm
Case Temperature
TCASE
−40
+85
°C
1 For input linearity performance at frequencies less than 1 MHz, see Figure 15 to Figure 17.
2 For power derating at frequencies less than 1 MHz, see Figure 2 to Figure 4.
Rev. A | Page 4 of 12
Data Sheet
ADRF5021
ABSOLUTE MAXIMUM RATINGS
4
2
For recommended operating conditions, see Table 1.
T
= 85°C
CASE
Table 2.
Parameter
0
Rating
–2
Supply Voltage
Positive
−0.3 V to +5.5 V
–4
Negative
−2.75 V to +0.3 V
−0.3 V to VDD + 0.3 V
–6
Digital Control Input Voltage
RF Input Power1 (f = 1 MHz to 30 GHz,
–8
T
CASE = 85°C)
–10
–12
–14
Through Path
Terminated Path
Hot Switching
27 dBm
25 dBm
21 dBm
10k
100k
1M
10M
100M
1G
10G 30G
Temperature
FREQUENCY (Hz)
Junction (TJ)
135°C
Figure 3. Power Derating for Terminated Path vs. Frequency, TCASE = 85°C
Storage
−65°C to +150°C
260°C
4
T
= 85°C
CASE
Reflow (MSL3 Rating)
Junction to Case Thermal Resistance, θJC
Through Path
Terminated Path
ESD Sensitivity
HBM
2
0
420°C/W
160°C/W
–2
–4
1 kV (Class 1)
–6
1 For power derating at frequencies less than 1 MHz, see Figure 2 to Figure 4.
–8
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
–10
–12
–14
10k
100k
1M
10M
100M
1G
10G 30G
FREQUENCY (Hz)
Figure 4. Power Derating for Hot Switching vs. Frequency, TCASE = 85°C
ESD CAUTION
Only one absolute maximum rating can be applied at any one time.
POWER DERATING CURVES
4
T
= 85°C
CASE
2
0
–2
–4
–6
–8
–10
–12
–14
10k
100k
1M
10M
100M
1G
10G 30G
FREQUENCY (Hz)
Figure 2. Power Derating for Through Path vs. Frequency, TCASE = 85°C
Rev. A | Page 5 of 12
ADRF5021
Data Sheet
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
20
19
18
17
16
1
2
3
4
5
15
14
13
12
11
VSS
EN
GND
GND
RFC
GND
GND
ADRF5021
GND
CTRL
VDD
TOP VIEW
(Not to Scale)
6
7
8
9
10
NOTES
1. THE EXPOSED PAD MUST BE CONNECTED
TO THE RF/DC GROUND OF THE PRINTED
CIRCUIT BOARD (PCB).
Figure 5. Pin Configuration (Top View)
Table 3. Pin Function Descriptions
Pin No.
Mnemonic
Description
1, 2, 4 to 7, 9, 10,
13, 16, 17, 19, 20
GND
Ground. These pins must be connected to the RF/dc ground of the printed circuit board (PCB).
3
RFC
RF1
RF Common Port. This pin is dc-coupled to 0 V and ac matched to 50 Ω. No dc blocking capacitor is
necessary when the RF line potential is equal to 0 V dc. See Figure 6 for the interface schematic.
RF1 Port. This pin is dc-coupled to 0 V and ac matched to 50 Ω. No dc blocking capacitor is necessary
when the RF line potential is equal to 0 V dc. See Figure 6 for the interface schematic.
8
11
12
14
15
18
VDD
CTRL
EN
VSS
RF2
Positive Supply Voltage.
Control Input. See Figure 7 for the interface schematic.
Enable Input. See Figure 7 for the interface schematic.
Negative Supply Voltage.
RF2 Port. This pin is dc-coupled to 0 V and ac matched to 50 Ω. No dc blocking capacitor is necessary
when the RF line potential is equal to 0 V dc. See Figure 6 for the interface schematic.
EPAD
Exposed Pad. The exposed pad must be connected to the RF/dc ground of the PCB.
INTERFACE SCHEMATICS
VDD
VDD
RFC,
RF1,
RF2
CTRL, EN
Figure 6. RFC, RF1, and RF2 Pins Interface Schematic
Figure 7. Digital Pins (CTRL and EN) Interface Schematic
Rev. A | Page 6 of 12
Data Sheet
ADRF5021
TYPICAL PERFORMANCE CHARACTERICS
INSERTION LOSS, RETURN LOSS, AND ISOLATION
Insertion loss and return loss measured on the probe matrix board using the ground, signal, ground (GSG) probes close to the RF pins;
isolation measured on an evaluation board because signal coupling between the probes limits the isolation performance of the ADRF5021
on the probe matrix board (see the Applications Information section for details of evaluation and probe matrix boards).
0
–0.5
–1.0
–1.5
–2.0
–2.5
–3.0
–3.5
–4.0
–4.5
–5.0
0
T
T
T
= +85°C
= +25°C
= –40°C
CASE
CASE
CASE
–5
–10
–15
–20
–25
–30
–35
–40
–45
–50
RFC
RF1 ON
RF2 OFF
0
5
10
15
20
25
30
35
40
0
5
10
15
20
25
30
35
40
FREQUENCY (GHz)
FREQUENCY (GHz)
Figure 8. Insertion Loss Between RFC and RF1/RF2 vs. Frequency over
Temperature
Figure 10. Return Loss vs. Frequency (RFC, RF1 On, and RF2 Off)
0
0
T
T
T
= +85°C
= +25°C
= –40°C
T
T
T
= +85°C
= +25°C
= –40°C
CASE
CASE
CASE
CASE
CASE
CASE
–10
–20
–30
–40
–50
–60
–70
–80
–90
–100
–10
–20
–30
–40
–50
–60
–70
–80
–90
–100
0
5
10
15
20
25
30
35
40
0
5
10
15
20
25
30
35
40
FREQUENCY (GHz)
FREQUENCY (GHz)
Figure 9. Isolation Between RFC and RF1/RF2 vs. Frequency over
Temperature
Figure 11. Isolation Between RF1 and RF2 vs. Frequency over
Temperature
Rev. A | Page 7 of 12
ADRF5021
Data Sheet
INPUT POWER COMPRESSION AND THIRD-ORDER INTERCEPT (IP3)
All large signal performance parameters were measured on the evaluation board.
32
30
28
26
24
22
20
18
16
14
12
10
32
30
28
26
24
22
20
18
16
14
12
10
T
T
T
= +85°C
T
T
T
= +85°C
= +25°C
= –40°C
CASE
CASE
CASE
CASE
= +25°C
CASE
= –40°C
CASE
0
5
10
15
20
25
30
10k
100k
1M
10M
100M
1G
FREQUENCY (GHz)
FREQUENCY (Hz)
Figure 12. Input 0.1 dB Power Compression (P0.1dB) vs. Frequency over
Temperature
Figure 15. Input 0.1 dB Power Compression (P0.1dB) vs. Frequency over
Temperature (Low Frequency Detail)
32
30
28
26
24
22
20
18
16
14
32
30
28
26
24
22
20
18
16
14
T
T
T
= +85°C
= +25°C
= –40°C
T
T
T
= +85°C
= +25°C
= –40°C
CASE
CASE
CASE
CASE
CASE
CASE
12
10
12
10
0
5
10
15
20
25
30
10k
100k
1M
10M
100M
1G
FREQUENCY (GHz)
FREQUENCY (Hz)
Figure 13. Input 1 dB Power Compression (P1dB) vs. Frequency over
Temperature
Figure 16. Input 1 dB Power Compression (P1dB) vs. Frequency over
Temperature (Low Frequency Detail)
60
60
55
50
45
40
35
30
T
T
T
= +85°C
= +25°C
= –40°C
CASE
CASE
CASE
55
50
45
40
35
30
25
20
T
T
T
= +85°C
= +25°C
= –40°C
CASE
CASE
CASE
25
20
10k
100k
1M
10M
100M
1G
0
5
10
15
20
25
30
FREQUENCY (Hz)
FREQUENCY (GHz)
Figure 14. Input IP3 vs. Frequency over Temperature
Figure 17. Input IP3 vs. Frequency over Temperature (Low Frequency Detail)
Rev. A | Page 8 of 12
Data Sheet
ADRF5021
THEORY OF OPERATION
The ADRF5021 requires a positive supply voltage applied to the
VDD pin and a negative supply voltage applied to the VSS pin.
Bypassing capacitors are recommended on the supply lines to
minimize RF coupling.
conducts the RF signal equally well in both directions between
its throw port (for example, RF1) and common port (RFC). The
isolation path (for example, RF2 to RFC) provides high loss
between the insertion loss path and its throw port (for example,
RF2) terminated to an internal 50 Ω resistor.
The ADRF5021 is internally matched to 50 Ω at the RF common
port (RFC) and the RF throw ports (RF1 and RF2); therefore,
no external matching components are required. All of the RF
ports are dc-coupled to 0 V, and no dc blocking is required at the
RF ports when the RF line potential is equal to 0 V. The design
is bidirectional; the RF input signal can be applied to the RFC
port while the RF throw port (RF1 or RF2) is output or vice versa.
When the EN pin is logic high, both the RF1 to RFC path and
the RF2 to RFC path are in an isolation state regardless of the
logic state of CTRL. RF1 and RF2 ports are terminated to
internal 50 Ω resistors, and RFC becomes open reflective.
The ideal power-up sequence is as follows:
1. Power up GND.
2. Power up VDD and VSS. The relative order is not
important.
3. Power up the digital control inputs. The relative order of
the logic control inputs is not important. However,
powering the digital control inputs before the VDD supply
can inadvertently forward bias and damage the internal
ESD protection structures.
The ADRF5021 incorporates a driver to perform logic functions
internally and to provide the user with the advantage of a simplified
control interface. The driver features two digital control input
pins, CTRL and EN.
When the EN pin is logic low, the RF1 to RFC path is in an
insertion loss state, and the RF2 to RFC path is in an isolation
state, or vice versa, depending on the logic level applied to the
CTRL pin. The insertion loss path (for example, RF1 to RFC)
4. Apply an RF input signal.
Table 4. Control Voltage Truth Table
Digital Control Input
RF Paths
EN
CTRL
Low
High
Low
RF1 to RFC
RF2 to RFC
Low
Low
High
High
Isolation (off)
Insertion loss (on)
Isolation (off)
Isolation (off)
Insertion loss (on)
Isolation (off)
Isolation (off)
Isolation (off)
High
Rev. A | Page 9 of 12
ADRF5021
Data Sheet
APPLICATIONS INFORMATION
Figure 20 shows the actual ADRF5021 evaluation board with
component placement. Two power supply ports are connected
to the VDD and VSS test points, TP5 and TP2, and the ground
reference is connected to the GND test point, TP1. On each
supply trace, a 100 pF bypass capacitor is used, and unpopulated
components positions are available for applying extra bypass
capacitors.
EVALUATION BOARD
Figure 18 and Figure 19 show the top and cross sectional views
of the evaluation board, which uses 4-layer construction with a
copper thickness of 0.5 oz (0.7 mil) and dielectric materials
between each copper layer.
EDGE PLATING 5 × 520mil
R 32mil
570mil
40mil
40mil
1500mil
Figure 18. Evaluation Board Layout (Top View)
G = 5mil
W = 14mil
0.5oz Cu (0.7mil)
0.5oz Cu (0.7mil)
0.5oz Cu (0.7mil)
T = 0.7mil
H = 8mil
RO4003
0.5oz Cu (0.7mil)
Figure 20. Populated Evaluation Board
Two control ports are connected to the EN and CTRL test
points, TP3 and TP4. On each control trace, a resistor position
is available to improve the isolation between the RF and control
signals. The RF ports are connected to the RFC, RF1, and RF2
connectors (J1, J2, and J3) that are end launch 2.4 mm RF
connectors. A through transmission line that connects
unpopulated RF connectors (J7 and J8) is also available to
measure the loss of the PCB. Figure 21 and Table 5 are the
evaluation board schematic and bill of materials, respectively.
FR4
0.5oz Cu (0.7mil)
FR4
0.5oz Cu (0.7mil)
Figure 19. Evaluation Board (Cross Sectional View)
All RF and dc traces are routed on the top copper layer whereas
the inner and bottom layers are grounded planes that provide
a solid ground for the RF transmission lines. Top dielectric
material is 8 mil Rogers RO4003, offering good high frequency
performance. The middle and bottom dielectric materials are
FR-4 type materials to achieve an overall board thickness of
62 mil.
The evaluation board shown in Figure 20 is available from
Analog Devices, Inc., upon request.
The RF transmission lines were designed using a coplanar
waveguide (CPWG) model with a width of 14 mil and ground
spacing of 5 mil to have a characteristic impedance of 50 Ω. For
good RF and thermal grounding, as many plated through vias
as possible are arranged around transmission lines and under
the exposed pad of the package.
Rev. A | Page 10 of 12
Data Sheet
ADRF5021
THR_CAL
RF2
J7
J8
DEPOP
DEPOP
J3
TP1
TP2
VSS
C4
100pF
C3
100nF
DEPOP
C6
10µF
DEPOP
20
19
18
17
16
VSS
EN
GND
GND
RFC
GND
GND
1
2
3
4
15
14
13
12
11
R1
0Ω
EN
TP3
RFC
GND
CTRL
VDD
U1
J1
R2
0Ω
CTRL
VDD
TP4
TP5
5
C5
100pF
C2
100pF
DEPOP
C1
6
7
8
9
10
10µF
DEPOP
RF1
J2
Figure 21. Evaluation Board Schematic
PROBE MATRIX BOARD
Table 5. Bill of Materials, Evaluation Board Components
Figure 22 and Figure 23 show the top and cross sectional views
of the probe matrix board that measures the s-parameters of the
ADRF5021 at close proximity to RF pins using the GSG probes.
The actual board duplicates the same layout in matrix form to
assemble multiple devices and uses RF traces for through,
reflect, and line (TRL) calibration.
Component Description
J1, J2, J3
J7, J8
End launch connectors, 2.4 mm
Unpopulated end launch connectors, 2.4 mm
Through hole mount test points
100 pF capacitors, 0402 package
Unpopulated capacitors, 0402 package
Unpopulated capacitors, 0603 package
0 Ω resistors, 0402 package
TP1 to TP5
C4, C5
C2, C3
C1, C6
R1, R2
U1
ADRF5021 SPDT switch
PCB
600-01583-00-1 evaluation PCB
220mil
340mil
Figure 22. Probe Board Layout (Top View)
G = 5mil
W = 14mil
0.5oz Cu
0.5oz Cu
0.5oz Cu
T = 0.7mil
H = 8mil
RO4003
0.5oz Cu
Figure 23. Probe Matrix Board (Cross Sectional View)
Rev. A | Page 11 of 12
ADRF5021
Data Sheet
OUTLINE DIMENSIONS
3.10
3.00
2.90
0.25
0.20
0.15
0.30
0.25
0.20
CHAMFERED
PIN 1 (0.3 × 45°)
PIN 1
CORNER AREA
16
20
0.70
REF
1
15
1.70
1.60 SQ
1.50
1.60 REF
SQ
EXPOSED
PAD
11
5
0.40
BSC
10
6
TOP VIEW
SIDE VIEW
BOTTOM VIEW
0.13
REF
FOR PROPER CONNECTION OF
THE EXPOSED PADS, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
0.776
0.726
0.676
0.530 REF
SECTION OF THIS DATA SHEET.
0.236
0.196
0.156
Figure 24. 20-Terminal Land Grid Array [LGA]
3 mm × 3 mm Body and 0.72 mm Package Height
(CC-20-3)
Dimensions shown in millimeters
ORDERING GUIDE
Model1
Temperature Range
MSL Rating2
Package Description
Package Option
Branding3
021
ADRF5021BCCZN
−40°C to +85°C
MSL3
20-Terminal Land Grid Array [LGA]
CC-20-3
XXXX
021
XXXX
ADRF5021BCCZN-R7
−40°C to +85°C
MSL3
20-Terminal Land Grid Array [LGA]
Evaluation Board
CC-20-3
ADRF5021-EVALZ
1 Z = RoHS-Compliant Part.
2 See the Absolute Maximum Ratings section.
3 XXXX is the 4-digit lot number.
©2016–2017 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D14580-0-2/17(A)
Rev. A | Page 12 of 12
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明