ADXRS620BBGZ-RL [ADI]
±300°/sec Yaw Rate Gyro; 为± 300A °/秒偏航角速度陀螺仪
| 型号： | ADXRS620BBGZ-RL |
| 厂家： | 
ADI |
| 描述： | ±300°/sec Yaw Rate Gyro |
| 文件： | 总12页 (文件大小：527K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
300°/sec Yaw Rate Gyro
ADXRS620
FEATURES
GENERAL DESCRIPTION
Qualified for automotive applications
Complete rate gyroscope on a single chip
Z-axis (yaw rate) response
High vibration rejection over wide frequency
2000 g powered shock survivability
Ratiometric to referenced supply
5 V single-supply operation
The ADXRS620 is a complete angular rate sensor (gyroscope)
that uses the Analog Devices, Inc., surface-micromachining
process to create a functionally complete and low cost angular
rate sensor integrated with all required electronics on one chip.
The manufacturing technique for this device is the same high
volume BiMOS process that is used for high reliability automotive
airbag accelerometers.
105°C operation
Self-test on digital command
Ultrasmall and light (<0.15 cc, <0.5 gram)
Temperature sensor output
The ADXRS620 is an automotive grade gyroscope that is 100%
pin, package, temperature, and function compatible to the
available industrial grade ADXRS652 gyro. Automotive grade
gyroscopes have more extensive guaranteed minimum/maximum
specifications due to automotive testing.
RoHS compliant
APPLICATIONS
The output signal, RATEOUT (1B, 2A), is a voltage that is
proportional to angular rate about the axis normal to the top
surface of the package. The output is ratiometric with respect
to a provided reference supply. An external capacitor sets the
bandwidth. Other external capacitors are required for operation.
Vehicle chassis rollover sensing
Inertial measurement units
Platform stabilization
A temperature output is provided for compensation techniques.
Two digital self-test inputs electromechanically excite the sensor
to test proper operation of both the sensor and the signal condi-
tioning circuits. The ADXRS620 is available in a 7 mm × 7 mm ×
3 mm BGA ceramic package.
FUNCTIONAL BLOCK DIAGRAM
+5V
(ADC REF)
100nF
+5V
ST2 ST1
TEMP
V
RATIO
ADXRS620
AV
CC
100nF
25kΩ
SELF-TEST
25kΩ
@ 25°C
AGND
DEMOD
MECHANICAL
SENSOR
DRIVE
AMP
AC
AMP
VGA
+5V
180kΩ ±1%
V
DD
CHARGE PUMP
AND VOLTAGE
REGULATOR
100nF
PGND
CP1 CP2 CP3 CP4 CP5 SUMJ
RATEOUT
100nF
22nF
22nF
C
OUT
Figure 1.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2010 Analog Devices, Inc. All rights reserved.
ADXRS620
TABLE OF CONTENTS
Features .............................................................................................. 1
Setting Bandwidth.........................................................................9
Temperature Output and Calibration.........................................9
Calibrated Performance................................................................9
ADXRS620 and Supply Ratiometricity ................................... 10
Null Adjustment ......................................................................... 10
Self-Test Function ...................................................................... 10
Continuous Self-Test.................................................................. 10
Outline Dimensions....................................................................... 11
Ordering Guide .......................................................................... 11
Automotive Products................................................................. 11
Applications....................................................................................... 1
General Description ......................................................................... 1
Functional Block Diagram .............................................................. 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Absolute Maximum Ratings............................................................ 4
Rate Sensitive Axis ....................................................................... 4
ESD Caution.................................................................................. 4
Pin Configuration and Function Descriptions............................. 5
Typical Performance Characteristics ............................................. 6
Theory of Operation ........................................................................ 9
REVISION HISTORY
9/10—Rev. A to Rev. B
Changes to Ordering Guide .......................................................... 11
7/10—Rev. 0 to Rev. A
Changes to Features Section and General Description Section . 1
Added Note 2 to Ordering Guide................................................. 11
Added Automotive Products Section........................................... 11
3/10—Revision 0: Initial Version
Rev. B | Page 2 of 12
ADXRS620
SPECIFICATIONS
All minimum and maximum specifications are guaranteed. Typical specifications are not guaranteed. TA = −40°C to +105°C, VS = AVCC
DD = 5 V, VRATIO = AVCC, angular rate = 0°/sec, bandwidth = 80 Hz (COUT = 0.01 µF), IOUT = 100 μA, 1 g, unless otherwise noted.
=
V
Table 1.
Parameter
Conditions
Min
300
Typ
Max
Unit
SENSITIVITY1
Clockwise rotation is positive output
Full-scale range over specifications range
−40°C to +105°C
Measurement Range2
Initial and Over Temperature
Temperature Drift3
Nonlinearity
°/sec
mV/°/sec
%
5.52
6
2
0.1
6.48
Best fit straight line
% of FS
NULL1
Null
−40°C to +105°C
Any axis
2.2
2.5
0.1
2.8
V
Linear Acceleration Effect
NOISE PERFORMANCE
Rate Noise Density
FREQUENCY RESPONSE
Bandwidth4
°/sec/g
0.05
14.5
TA ≤ 25°C
°/sec/√Hz
0.01
12
2500
17
Hz
kHz
Sensor Resonant Frequency
SELF-TEST1
ST1 RATEOUT Response
ST2 RATEOUT Response
ST1 to ST2 Mismatch5
Logic 1 Input Voltage
Logic 0 Input Voltage
Input Impedance
TEMPERATURE SENSOR1
VOUT at 25°C
ST1 pin from Logic 0 to Logic 1
ST2 pin from Logic 0 to Logic 1
−650
250
−5
−450
450
−250
650
+5
mV
mV
%
V
V
3.3
1.7
100
To common
40
50
kΩ
Load = 10 MΩ
@ 25°C, VRATIO = 5 V
2.35
2.5
9
25
25
2.65
50
V
Scale Factor6
mV/°C
kΩ
Load to VS
Load to Common
TURN-ON TIME
OUTPUT DRIVE CAPABILITY
Current Drive
Capacitive Load Drive
POWER SUPPLY
kΩ
Power on to ½°/sec of final
For rated specifications
ms
200
1000
µA
pF
Operating Voltage (VS)
Quiescent Supply Current
TEMPERATURE RANGE
Specified Performance
4.75
−40
5.00
3.5
5.25
4.5
V
mA
+105
°C
1 Parameter is linearly ratiometric with VRATIO
.
2 The maximum range possible, including output swing range, initial offset, sensitivity, offset drift, and sensitivity drift at 5 V supplies.
3 From +25°C to −40°C or from +25°C to 105°C.
4 Adjusted by external capacitor, COUT. Reducing bandwidth below 0.01 Hz does not reduce noise further.
5 Self-test mismatch is described as (ST2 + ST1)/((ST2 − ST1)/2).
6 For a change in temperature from 25°C to 26°C. VTEMP is ratiometric to VRATIO. See the Temperature Output and Calibration section for more details.
Rev. B | Page 3 of 12
ADXRS620
ABSOLUTE MAXIMUM RATINGS
Table 2.
RATE SENSITIVE AXIS
The ADXRS620 is a Z-axis rate-sensing device (also called
a yaw rate sensing device). It produces a positive going output
voltage for clockwise rotation about the axis normal to the
package top, that is, clockwise when looking down at the
package lid.
Parameter
Acceleration (Any Axis, 0.5 ms)
Unpowered
Powered
VDD, AVCC
VRATIO
Rating
2000 g
2000 g
−0.3 V to +6.0 V
AVCC
RATE
RATE OUT
AXIS
ST1, ST2
AVCC
V
= 5V
CC
LONGITUDINAL
AXIS
4.75V
Output Short-Circuit Duration
(Any Pin to Common)
Operating Temperature Range
Storage Temperature Range
Indefinite
+
1
V
/2
RATIO
7
RATE IN
0.25V
−55°C to +125°C
−65°C to +150°C
A B C D E F G
LATERAL AXIS
A1
GND
Stresses above those listed under the Absolute Maximum
Ratings may cause permanent damage to the device. This is a
stress rating only; functional operation of the device at these or
any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Figure 2. RATEOUT Signal Increases with Clockwise Rotation
ESD CAUTION
Drops onto hard surfaces can cause shocks of greater than
2000 g and can exceed the absolute maximum rating of the
device. Exercise care during handling to avoid damage.
Rev. B | Page 4 of 12
ADXRS620
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
V
CP5
CP3
DD
CP4
PGND
7
6
5
4
3
2
CP1
ST1
CP2
ST2
AV
TEMP
CC
1
AGND
RATEOUT
V
NC
D
SUMJ
C
RATIO
G
F
E
B
A
Figure 3. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
6D, 7D
6A, 7B
6C, 7C
5A, 5B
4A, 4B
3A, 3B
1B, 2A
1C, 2C
1D, 2D
1E, 2E
1F, 2G
3F, 3G
4F, 4G
5F, 5G
6G, 7F
6E, 7E
Mnemonic
Description
CP5
CP4
CP3
CP1
CP2
AVCC
RATEOUT
SUMJ
NC
VRATIO
AGND
TEMP
ST2
ST1
PGND
VDD
HV Filter Capacitor (0.1 µF)
Charge Pump Capacitor (22 nF)
Charge Pump Capacitor (22 nF)
Charge Pump Capacitor (22 nF)
Charge Pump Capacitor (22 nF)
Positive Analog Supply
Rate Signal Output
Output Amp Summing Junction
No Connect
Reference Supply for Ratiometric Output
Analog Supply Return
Temperature Voltage Output
Self-Test for Sensor 2
Self-Test for Sensor 1
Charge Pump Supply Return
Positive Charge Pump Supply
Rev. B | Page 5 of 12
ADXRS620
TYPICAL PERFORMANCE CHARACTERISTICS
N > 1000 for all typical performance plots, unless otherwise noted.
20
18
30
25
16
14
12
10
8
20
15
10
5
6
4
2
0
0
–10 –8
–6
–4
–2
0
2
4
6
8
10
DRIFT (%)
RATE OUT (V)
Figure 7. Sensitivity Drift over Temperature
Figure 4. Null Output at 25°C (VRATIO = 5 V)
35
30
45
40
35
25
20
30
25
20
15
10
5
15
10
5
0
0
–0.5 –0.4 –0.3 –0.2 –0.1
0
0.1 0.2
0.3 0.4 0.5
–650 –610 –570 –530 –490 –450 –410 –370 –330 –290 –250
ST1 Δ (mV)
(°/sec°/C)
Figure 8. ST1 Output Change at 25°C (VRATIO = 5 V)
Figure 5. Null Drift over Temperature (VRATIO = 5 V)
40
16
14
12
35
30
25
20
10
8
15
10
5
6
4
2
0
0
250 290 330 370 410 450 490 530 570 610 650
5.5 5.6 5.7 5.8 5.9
6
6.1 6.2 6.3 6.4 6.5
SENSITIVITY (mV/°/sec)
ST2 Δ (mV)
Figure 6. Sensitivity at 25°C (VRATIO = 5 V)
Figure 9. ST2 Output Change at 25°C (VRATIO = 5 V)
Rev. B | Page 6 of 12
ADXRS620
70
60
40
35
30
25
20
15
10
5
50
40
30
20
10
0
0
2.40 2.42 2.44 2.46 2.48 2.50 2.52 2.54 2.56 2.58 2.60
–5
–4 –3
–2
–1
0
1
2
3
4
5
SELF-TEST MISMATCH (%)
VOLTAGE (V)
Figure 10. Self-Test Mismatch at 25°C (VRATIO = 5 V)
Figure 13. VTEMP Output at 25°C (VRATIO = 5 V)
600
400
200
0
3.3
3.1
2.9
2.7
2.5
2.3
2.1
1.9
1.7
1.5
ST2
–200
–400
–600
ST1
256 PARTS
100 120
–40
–20
0
20
40
60
80
–40
–20
0
20
40
60
80
100
120
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 11. Typical Self-Test Change over Temperature
Figure 14. VTEMP Output over Temperature (VRATIO = 5 V)
30
25
20
15
10
5
60
50
REF
Y
X
40
+45°
–45°
30
20
10
0
–10
–20
0
750
770
790
TIME (ms)
810
830
850
2.5 2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5
CURRENT CONSUMPTION (mA)
Figure 12. Current Consumption at 25°C (VRATIO = 5 V)
Figure 15. g and g × g Sensitivity for a 50 g, 10 ms Pulse
Rev. B | Page 7 of 12
ADXRS620
0.10
0.05
2.0
LAT
LONG
RATE
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0
–0.05
–0.10
0
20
40
60
80
100
120
140
100
1k
10k
FREQUENCY (Hz)
TIME (Hours)
Figure 16. Typical Response to 10 g Sinusoidal Vibration
Figure 19. Typical Shift in 90 sec Null Averages Accumulated
over 140 Hours
(Sensor Bandwidth = 2 kHz)
0.10
400
300
DUT1 OFFSET BY +200°/sec
0.05
0
200
100
0
–100
–200
–300
–400
DUT2 OFFSET BY –200°/sec
–0.05
–0.10
0
600
1200
1800
2400
3000
3600
0
50
100
150
200
250
TIME (Seconds)
TIME (ms)
Figure 20. Typical Shift in Short-Term Null (Bandwidth = 1 Hz)
Figure 17. Typical High g (2500 g) Shock Response
(Sensor Bandwidth = 40 Hz)
0.1
1
0.01
0.001
0.1
0.01
0.0001
0.001
10
100
1k
10k
100k
0.01
0.1
1
10
100
1k
10k
100k
FREQUENCY (Hz)
AVERAGE TIME (Seconds)
Figure 21. Typical Noise Spectral Density (Bandwidth = 40 Hz)
Figure 18. Typical Root Allan Deviation at 25°C vs. Averaging Time
Rev. B | Page 8 of 12
ADXRS620
THEORY OF OPERATION
The ADXRS620 operates on the principle of a resonator gyro.
Two polysilicon sensing structures each contain a dither frame
that is electrostatically driven to resonance, producing the
necessary velocity element to produce a Coriolis force during
angular rate. At two of the outer extremes of each frame,
orthogonal to the dither motion, are movable fingers that are
placed between fixed pickoff fingers to form a capacitive pickoff
structure that senses Coriolis motion. The resulting signal is fed
to a series of gain and demodulation stages that produces the
electrical rate signal output. The dual-sensor design rejects
external g-forces and vibration. Fabricating the sensor with the
signal conditioning electronics preserves signal integrity in
noisy environments.
Figure 22 shows the effect of adding a 250 Hz filter to the output
of an ADXRS620 set to 40 Hz bandwidth (as shown in Figure 21).
High frequency demodulation artifacts are attenuated by
approximately 18 dB.
0.1
0.01
0.001
0.0001
0.00001
0.000001
The electrostatic resonator requires 18 V to 20 V for operation.
Because only 5 V are typically available in most applications,
a charge pump is included on chip. If an external 18 V to 20 V
supply is available, the two capacitors on CP1 through CP4 can
be omitted and this supply can be connected to CP5 (Pin 6D,
Pin 7D). Note that CP5 should not be grounded when power is
applied to the ADXRS620. Although no damage occurs, under
certain conditions the charge pump may fail to start up after the
ground is removed without first removing power from the
ADXRS620.
10
100
1k
10k
100k
FREQUENCY (Hz)
Figure 22. Noise Spectral Density with Additional 250 Hz Filter
TEMPERATURE OUTPUT AND CALIBRATION
It is common practice to temperature-calibrate gyros to improve
their overall accuracy. The ADXRS620 has a temperature propor-
tional voltage output that provides input to such a calibration
method. The temperature sensor structure is shown in Figure 23.
The temperature output is characteristically nonlinear, and any
load resistance connected to the TEMP output results in decreasing
the TEMP output and temperature coefficient. Therefore, buf-
fering the output is recommended.
SETTING BANDWIDTH
External Capacitor COUT is used in combination with the on-
chip ROUT resistor to create a low-pass filter to limit the
bandwidth of the ADXRS620 rate response. The −3 dB
frequency set by ROUT and COUT is
1
The voltage at the TEMP pin (3F, 3G) is nominally 2.5 V at 25°C,
and VRATIO = 5 V. The temperature coefficient is ~9 mV/°C at
25°C. Although the TEMP output is highly repeatable, it has
only modest absolute accuracy.
fO
=
UT
2 × π × ROUT × COUT
This frequency can be well controlled because ROUT has been
trimmed during manufacturing to be 180 kΩ 1%. Any
external resistor applied between the RATEOUT pin (1B, 2A)
and SUMJ pin (1C, 2C) results in
V
RATIO
V
TEMP
R
R
FIXED
TEMP
(
180 kΩ× REXT
)
Figure 23. Temperature Sensor Structure
RO
=
UT
180 kΩ + REXT
CALIBRATED PERFORMANCE
In general, an additional hardware or software filter is added
to attenuate high frequency noise arising from demodulation
spikes at the gyro’s 14 kHz resonant frequency. (The noise spikes
at 14 kHz can be clearly seen in the power spectral density curve
shown in Figure 21). Typically, this additional filter’s corner
frequency is set to greater than 5× the required bandwidth to
preserve good phase response.
Using a three-point calibration technique, it is possible to
calibrate the null and sensitivity drift of the ADXRS620 to
an overall accuracy of nearly 200°/hour. An overall accuracy
of 40°/hour or better is possible using more points.
Limiting the bandwidth of the device reduces the flat-band
noise during the calibration process, improving the measure-
ment accuracy at each calibration point.
Rev. B | Page 9 of 12
ADXRS620
ADXRS620 AND SUPPLY RATIOMETRICITY
NULL ADJUSTMENT
The ADXRS620 RATEOUT and TEMP signals are ratiometric
to the VRATIO voltage, that is, the null voltage, rate sensitivity, and
temperature outputs are proportional to VRATIO. Thus, the
ADXRS620 is most easily used with a supply-ratiometric ADC
that results in self-cancellation of errors due to minor supply
variations. There is some small error due to nonratiometric
behavior. Typical ratiometricity error for null, sensitivity, self-
test, and temperature output is outlined in Table 4.
The nominal 2.5 V null is for a symmetrical swing range at
RATEOUT (1B, 2A). However, a nonsymmetrical output swing
may be suitable in some applications. Null adjustment is possible
by injecting a suitable current to SUMJ (1C, 2C). Note that supply
disturbances may reflect some null instability. Digital supply
noise should be avoided, particularly in this case.
SELF-TEST FUNCTION
The ADXRS620 includes a self-test feature that actuates each of
the sensing structures and associated electronics as if subjected
to angular rate. It is activated by standard logic high levels applied
to Input ST1 (5F, 5G), Input ST2 (4F, 4G), or both. ST1 causes
the voltage at RATEOUT to change about −0.450 V, and ST2
causes an opposite change of +0.450 V. The self-test response
follows the viscosity temperature dependence of the package
atmosphere, approximately 0.25%/°C.
Note that VRATIO must never be greater than AVCC.
Table 4. Ratiometricity Error for Various Parameters
Parameter
VS = VRATIO = 4.85 V
VS = VRATIO = 5.15 V
ST1
Mean
Sigma
ST2
0.3%
0.21%
0.09%
0.19%
Mean
Sigma
Null
Mean
Sigma
Sensitivity
Mean
Sigma
VTEMP
−0.15%
0.22%
−0.2%
0.2%
Activating both ST1 and ST2 simultaneously is not damaging.
ST1 and ST2 are fairly closely matched ( 5%), but actuating
both simultaneously may result in a small apparent null bias
shift proportional to the degree of self-test mismatch.
−0.3%
0.2%
−0.05%
0.08%
ST1 and ST2 are activated by applying a voltage equal to VRATIO
to the ST1 and ST2 pins. The voltage applied to ST1 and ST2
0.003%
0.06%
−0.25%
0.06%
must never be greater than AVCC
.
CONTINUOUS SELF-TEST
Mean
Sigma
−0.2%
0.05%
−0.04%
0.06%
The on-chip integration of the ADXRS620 gives it higher reliability
than is obtainable with any other high volume manufacturing
method. In addition, it is manufactured under a mature BiMOS
process with field-proven reliability. As an additional failure
detection measure, a power-on self-test can be performed.
However, some applications may warrant continuous self-test
while sensing rate. Details outlining continuous self-test techniques
are also available in the AN-768 Application Note at analog.com.
Rev. B | Page 10 of 12
ADXRS620
OUTLINE DIMENSIONS
7.05
6.85 SQ
6.70
*
A1 CORNER
INDEX AREA
A1 BALL
CORNER
7
6
5
4
3
2
1
A
B
C
D
E
F
4.80
BSC SQ
0.80
BSC
G
TOP VIEW
BOTTOM VIEW
DETAIL A
DETAIL A
3.80 MAX
3.20 MAX
2.50 MIN
0.60 MAX
0.25 MIN
0.60
0.55
COPLANARITY
0.15
SEATING
PLANE
0.50
BALL DIAMETER
*
BALL A1 IDENTIFIER IS GOLD PLATED AND CONNECTED
TO THE D/A PAD INTERNALLY VIA HOLES.
Figure 24. 32-Lead Ceramic Ball Grid Array [CBGA]
(BG-32-3)
Dimensions shown in millimeters
ORDERING GUIDE
Model1, 2
Temperature Range
–40°C to +105°C
–40°C to +105°C
–40°C to +105°C
–40°C to +105°C
Package Description
Package Option
ADXRS620BBGZ
ADXRS620BBGZ-RL
ADXRS620WBBGZA
ADXRS620WBBGZA-RL
EVAL-ADXRS620Z
32-Lead Ceramic Ball Grid Array (CBGA)
32-Lead Ceramic Ball Grid Array (CBGA)
32-Lead Ceramic Ball Grid Array (CBGA)
32-Lead Ceramic Ball Grid Array (CBGA)
Evaluation Board
BG-32-3
BG-32-3
BG-32-3
BG-32-3
1 Z = RoHS Compliant Part.
2 W = Qualified for Automotive Applications.
AUTOMOTIVE PRODUCTS
The ADXRS620W models are available with controlled manufacturing to support the quality and reliability requirements of automotive
applications. Note that these automotive models may have specifications that differ from the commercial models; therefore, designers
should review the Specifications section of this data sheet carefully. Only the automotive grade products shown are available for use in
automotive applications. Contact your local Analog Devices account representative for specific product ordering information and to
obtain the specific Automotive Reliability reports for these models.
Rev. B | Page 11 of 12
ADXRS620
NOTES
©2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D08887-0-9/10(B)
Rev. B | Page 12 of 12
相关型号：
ADXRS622WBBGZ
IC SPECIALTY ANALOG CIRCUIT, CBGA32, ROHS COMPLIANT, CERAMIC, BGA-32, Analog IC:Other
ADI
ADXRS622WBBGZ-RL
IC SPECIALTY ANALOG CIRCUIT, CBGA32, ROHS COMPLIANT, CERAMIC, BGA-32, Analog IC:Other
ADI
©2020 ICPDF网 联系我们和版权申明