ADXRS622WBBGZA [ADI]
±250°/sec Yaw Rate Gyroscope;型号: | ADXRS622WBBGZA |
厂家: | ADI |
描述: | ±250°/sec Yaw Rate Gyroscope |
文件: | 总12页 (文件大小:314K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
250°/sec Yaw Rate Gyroscope
ADXRS622
FEATURES
GENERAL DESCRIPTION
Complete rate gyroscope on a single chip
Z-axis (yaw rate) response
High vibration rejection over wide frequency
2000 g powered shock survivability
Ratiometric to referenced supply
5 V single-supply operation
The ADXRS622 is a complete angular rate sensor (gyroscope)
that uses the Analog Devices, Inc., surface-micromachining
process to make a functionally complete and low cost angular
rate sensor, integrated with all of the required electronics on
one chip. The manufacturing technique for this device is the
same high volume BiMOS process used for high reliability
automotive airbag accelerometers.
105°C operation
Self-test on digital command
Ultrasmall and light: <0.15 cc, <0.5 gram
Temperature sensor output
RoHS compliant
Qualified for automotive applications
The ADXRS622 is an automotive grade gyroscope that has
100% pin, package, temperature, and function compatible to the
available industrial grade ADXRS652 gyroscope. Automotive
grade gyroscopes have more extensive guaranteed minimum/
maximum specifications due to automotive testing.
The output signal, RATEOUT (1B, 2A), is a voltage proportional to
the angular rate about the axis that is normal to the top surface of
the package. The output is ratiometric with respect to a provided
reference supply. An external capacitor sets the bandwidth. Other
external capacitors are required for operation.
APPLICATIONS
Vehicle chassis rollover sensing
Inertial measurement units
Platform stabilization
A temperature output is provided for compensation techniques.
Two digital self-test inputs electromechanically excite the sensor
to test proper operation of both the sensor and the signal condi-
tioning circuits. The ADXRS622 is available in a 7 mm × 7 mm ×
3 mm BGA chip-scale package.
FUNCTIONAL BLOCK DIAGRAM
5V
(ADC REF)
100nF
5V
ST2 ST1
TEMP
V
RATIO
ADXRS622
AV
CC
100nF
25kΩ
SELF-TEST
25kΩ
@ 25°C
AGND
DEMOD
MECHANICAL
SENSOR
DRIVE
AMP
AC
AMP
VGA
5V
180kΩ ±1%
V
DD
CHARGE PUMP
AND VOLTAGE
REGULATOR
100nF
PGND
CP1 CP2 CP3 CP4 CP5 SUMJ
RATEOUT
100nF
22nF
22nF
C
OUT
Figure 1.
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ©2009–2010 Analog Devices, Inc. All rights reserved.
ADXRS622
TABLE OF CONTENTS
Features .............................................................................................. 1
Theory of Operation .........................................................................9
Setting Bandwidth.........................................................................9
Temperature Output and Calibration.........................................9
Calibrated Performance................................................................9
ADXRS622 and Supply Ratiometricity ................................... 10
Null Adjustment ......................................................................... 10
Self-Test Function ...................................................................... 10
Continuous Self-Test.................................................................. 10
Outline Dimensions....................................................................... 11
Ordering Guide .......................................................................... 11
Automotive Products................................................................. 11
Applications....................................................................................... 1
General Description ......................................................................... 1
Functional Block Diagram .............................................................. 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Absolute Maximum Ratings............................................................ 4
Rate Sensitive Axis ....................................................................... 4
ESD Caution.................................................................................. 4
Pin Configuration and Function Descriptions............................. 5
Typical Performance Characteristics ............................................. 6
REVISION HISTORY
9/10—Rev. B to Rev. C
Changes to Ordering Guide .......................................................... 11
8/10—Rev. A to Rev. B
Changes to Features Section and General Description Section . 1
Added Automotive Applications Section .................................... 11
2/10—Rev. 0 to Rev. A
Updated Outline Dimensions....................................................... 11
Changes to Ordering Guide .......................................................... 11
2/09—Revision 0: Initial Version
Rev. C | Page 2 of 12
ADXRS622
SPECIFICATIONS
All minimum and maximum specifications are guaranteed. Typical specifications are not guaranteed.
TA = −40°C to +105°C, VS = AVCC = VDD = 5 V, VRATIO = AVCC, angular rate = 0°/sec, bandwidth = 80 Hz (COUT = 0.01 µF), IOUT = 100 µA,
1 g, unless otherwise noted.
Table 1.
Parameter
Conditions
Min
250
Typ
300
7.0
2
Max
Unit
SENSITIVITY1
Clockwise rotation is positive output
Full-scale range over specifications range
−40°C to +105°C
Measurement Range2
Initial and Over Temperature
Temperature Drift3
Nonlinearity
°/sec
mV/°/sec
%
6.2
7.8
Best fit straight line
0.1
% of FS
NULL1
Null
−40°C to +105°C
Any axis
2.15
2.5
0.1
2.85
V
Linear Acceleration Effect
NOISE PERFORMANCE
Rate Noise Density
FREQUENCY RESPONSE
Bandwidth4
°/sec/g
0.06
14.5
TA ≤ 25°C
°/sec/√Hz
0.01
12
2500
17
Hz
kHz
Sensor Resonant Frequency
SELF-TEST1
ST1 RATEOUT Response
ST2 RATEOUT Response
ST1 to ST2 Mismatch5
Logic 1 Input Voltage
Logic 0 Input Voltage
Input Impedance
TEMPERATURE SENSOR1
VOUT at 25°C
ST1 pin from Logic 0 to Logic 1
ST2 pin from Logic 0 to Logic 1
−750
300
−5
−525
525
−300
750
+5
mV
mV
%
V
V
3.3
1.7
100
To common
40
50
kΩ
Load = 10 MΩ
@ 25°C, VRATIO = 5 V
2.35
2.5
9
25
25
2.65
50
V
Scale Factor6
mV/°C
kΩ
kΩ
Load to VS
Load to Common
TURN-ON TIME
Power on to ½°/sec of final
For rated specifications
ms
OUTPUT DRIVE CAPABILITY
Current Drive
Capacitive Load Drive
POWER SUPPLY
200
1000
µA
pF
Operating Voltage (VS)
Quiescent Supply Current
TEMPERATURE RANGE
Specified Performance
4.75
−40
5.00
3.5
5.25
4.5
V
mA
+105
°C
1 Parameter is linearly ratiometric with VRATIO
.
2 Measurement range is the maximum range possible, including output swing range, initial offset, sensitivity, offset drift, and sensitivity drift at 5 V supplies.
3 From +25°C to −40°C or +25°C to +105°C.
4 Adjusted by external capacitor, COUT. Reducing bandwidth below 0.01 Hz does not result in further noise improvement.
5 Self-test mismatch is described as (ST2 + ST1)/((ST2 − ST1)/2).
6 Scale factor for a change in temperature from 25°C to 26°C. VTEMP is ratiometric to VRATIO. See the Temperature Output and Calibration section for more information.
Rev. C | Page 3 of 12
ADXRS622
ABSOLUTE MAXIMUM RATINGS
RATE SENSITIVE AXIS
Table 2.
The ADXRS622 is a Z-axis rate-sensing device (also called a
yaw rate-sensing device). It produces a positive going output
voltage for clockwise rotation about the axis normal to the
package top, that is, clockwise when looking down at the
package lid.
Parameter
Acceleration (Any Axis, 0.5 ms)
Unpowered
Powered
VDD, AVCC
VRATIO
Rating
2000 g
2000 g
−0.3 V to +6.0 V
AVCC
ST1, ST2
Output Short-Circuit Duration
(Any Pin to Common)
Operating Temperature Range
Storage Temperature Range
AVCC
Indefinite
RATE
AXIS
RATE OUT
V
7
= 5V
CC
LONGITUDINAL
AXIS
4.75V
−55°C to +125°C
−65°C to +150°C
+
1
V
/2
RATIO
RATE IN
0.25V
A B C D E F G
LATERAL AXIS
A1
Stresses above those listed under the Absolute Maximum
Ratings may cause permanent damage to the device. This is a
stress rating only; functional operation of the device at these or
any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
GND
Figure 2. RATEOUT Signal Increases with Clockwise Rotation
ESD CAUTION
Drops onto hard surfaces can cause shocks of >2000 g and can
exceed the absolute maximum rating of the device. Exercise
care during handling to avoid damage.
Rev. C | Page 4 of 12
ADXRS622
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
V
CP5
CP3
DD
CP4
PGND
7
6
5
4
3
2
CP1
ST1
CP2
ST2
AV
TEMP
CC
1
AGND
RATEOUT
V
NC
D
SUMJ
C
RATIO
G
F
E
B
A
Figure 3. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
6D, 7D
6A, 7B
6C, 7C
5A, 5B
4A, 4B
3A, 3B
1B, 2A
1C, 2C
1D, 2D
1E, 2E
1F, 2G
3F, 3G
4F, 4G
5F, 5G
6G, 7F
6E, 7E
Mnemonic
Description
CP5
CP4
CP3
CP1
CP2
AVCC
RATEOUT
SUMJ
NC
VRATIO
AGND
TEMP
ST2
ST1
PGND
VDD
HV Filter Capacitor (0.1 µF).
Charge Pump Capacitor (22 nF).
Charge Pump Capacitor (22 nF).
Charge Pump Capacitor (22 nF).
Charge Pump Capacitor (22 nF).
Positive Analog Supply.
Rate Signal Output.
Output Amp Summing Junction.
No Connect.
Reference Supply for Ratiometric Output.
Analog Supply Return.
Temperature Voltage Output.
Self-Test for Sensor 2.
Self-Test for Sensor 1.
Charge Pump Supply Return.
Positive Charge Pump Supply.
Rev. C | Page 5 of 12
ADXRS622
TYPICAL PERFORMANCE CHARACTERISTICS
N > 1000 for all typical performance plots, unless otherwise noted.
35
30
25
20
15
10
5
20
18
16
14
12
10
8
6
4
2
0
0
PERCENT CHANGE FROM 25°C
(V)
Figure 7. Sensitivity Drift over Temperature
Figure 4. Null Output at 25°C (VRATIO = 5 V)
40
35
30
25
20
15
10
5
70
60
50
40
30
20
10
0
0
(mV)
mV DRIFT FROM 25°C
Figure 5. Null Drift over Temperature (VRATIO = 5 V)
Figure 8. ST1 Output Change at 25°C (VRATIO = 5 V)
30
25
20
15
10
5
40
35
30
25
20
15
10
5
0
0
(mV/°/sec)
(mV)
Figure 6. Sensitivity at 25°C (VRATIO = 5 V)
Figure 9. ST2 Output Change at 25°C (VRATIO = 5 V)
Rev. C | Page 6 of 12
ADXRS622
30
25
20
15
10
5
70
60
50
40
30
20
10
0
0
PERCENT MISMATCH
(V)
Figure 13. VTEMP Output at 25°C (VRATIO = 5 V)
Figure 10. Self-Test Mismatch at 25°C (VRATIO = 5 V)
3.3
3.1
2.9
2.7
2.5
2.3
2.1
1.9
1.7
1.5
600
400
200
0
ST2
200
400
600
ST1
–50
–25
0
25
50
75
100
–50
–30
–10
10
30
50
70
90
110
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 11. Typical Self-Test Change over Temperature
Figure 14. VTEMP Output over Temperature, 256 Parts (VRATIO = 5 V)
30
25
20
15
10
5
60
REF
50
40
Y
X
+45°
–45°
30
20
10
0
–10
0
–20
750
770
790
TIME (ms)
810
830
850
(mA)
Figure 12. Current Consumption at 25°C (VRATIO = 5 V)
Figure 15. g and g × g Sensitivity for a 50 g, 10 ms Pulse
Rev. C | Page 7 of 12
ADXRS622
0.10
0.05
2.0
LAT
LONG
RATE
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0
–0.05
–0.10
0
20
40
60
80
100
120
140
100
1k
10k
FREQUENCY (Hz)
TIME (Hours)
Figure 16. Typical Response to 10 g Sinusoidal Vibration
Figure 19. Typical Shift in 90 sec Null Averages Accumulated
over 140 Hours
(Sensor Bandwidth = 40 Hz)
400
300
0.10
DUT1 OFFSET BY +200°/sec
200
0.05
0
100
0
–100
–200
–300
–400
DUT2 OFFSET BY –200°/sec
–0.05
–0.10
0
50
100
150
200
250
0
600
1200
1800
2400
3000
3600
TIME (ms)
TIME (Seconds)
Figure 17. Typical High g (2500 g) Shock Response
Figure 20. Typical Shift in Short Term Null (Bandwidth = 1 Hz)
(Sensor Bandwidth = 40 Hz)
1
0.1
0.1
0.01
0.001
0.01
0.001
0.0001
0.01
0.1
1
10
100
1k
10k
100k
10
100
1k
10k
100k
AVERAGING TIME (Seconds)
(Hz)
Figure 21. Typical Noise Spectral Density (Bandwidth = 40 Hz)
Figure 18. Typical Root Allan Deviation at 25°C vs. Averaging Time
Rev. C | Page 8 of 12
ADXRS622
THEORY OF OPERATION
0.1
0.01
The ADXRS622 operates on the principle of a resonator gyro.
Two polysilicon sensing structures each contain a dither frame
that is electrostatically driven to resonance, producing the neces-
sary velocity element to produce a Coriolis force during angular
rate. At two of the outer extremes of each frame, orthogonal to
the dither motion, are movable fingers that are placed between
fixed pickoff fingers to form a capacitive pickoff structure that
senses Coriolis motion. The resulting signal is fed to a series of
gain and demodulation stages that produce the electrical rate
signal output. The dual-sensor design rejects external g-forces and
vibration. Fabricating the sensor with the signal conditioning
electronics preserves signal integrity in noisy environments.
0.001
0.0001
0.00001
0.000001
10
100
1k
10k
100k
The electrostatic resonator requires 18 V to 20 V for operation.
Because only 5 V are typically available in most applications,
a charge pump is included onchip. If an external 18 V to 20 V
supply is available, the two capacitors on CP1 from CP4 can
be omitted, and this supply can be connected to the CP5 pin
(6D, 7D). Note that CP5 should not be grounded when power is
applied to the ADXRS622. Although no damage occurs, under
certain conditions the charge pump may fail to start up after the
ground is removed if power is not first removed from the
ADXRS622.
(Hz)
Figure 22. Noise Spectral Density with Additional 250 Hz Filter
TEMPERATURE OUTPUT AND CALIBRATION
It is common practice to temperature-calibrate gyros to improve
their overall accuracy. The ADXRS622 has a temperature propor-
tional voltage output that provides input to such a calibration
method. The temperature sensor structure is shown in Figure 23.
The temperature output is characteristically nonlinear, and any
load resistance connected to the TEMP output results in decreasing
the TEMP output and its temperature coefficient. Therefore,
buffering the output is recommended.
SETTING BANDWIDTH
External Capacitor COUT is used in combination with the on-
chip ROUT resistor to create a low-pass filter to limit the bandwidth
of the ADXRS622 rate response. The −3 dB frequency set by
The voltage at the TEMP pin (3F, 3G) is nominally 2.5 V at 25°C,
and VRATIO = 5 V. The temperature coefficient is ~9 mV/°C at
25°C. Although the TEMP output is highly repeatable, it has
only modest absolute accuracy.
ROUT and COUT is
fOUT = 1/ 2 × π × ROUT × COUT
(
)
V
RATIO
V
TEMP
and can be well controlled because ROUT has been trimmed
during manufacturing to be 180 kΩ 1%. Any external resistor
applied between the RATEOUT pin (1B, 2A) and SUMJ pin
(1C, 2C) results in
R
R
FIXED
TEMP
Figure 23. ADXRS622 Temperature Sensor Structure
ROUT
=
180 kΩ × REXT
/
180 kΩ + REXT
CALIBRATED PERFORMANCE
Using a three-point calibration technique, it is possible to
calibrate the ADXRS622 null and sensitivity drift to an overall
accuracy of nearly 200°/hour. An overall accuracy of 40°/hour
or better is possible using more points.
In general, an additional hardware or software filter is added to
attenuate high frequency noise arising from demodulation spikes
at the 14 kHz resonant frequency of the gyro. The noise spikes
at 14 kHz can be clearly seen in the power spectral density
curve, shown in Figure 21. Typically, this additional filter corner
frequency is set to greater than 5× the required bandwidth to
preserve good phase response.
Limiting the bandwidth of the device reduces the flat-band noise
during the calibration process, improving the measurement
accuracy at each calibration point.
Figure 22 shows the effect of adding a 250 Hz filter to the
output of an ADXRS622 set to 40 Hz bandwidth (as shown
in Figure 21). High frequency demodulation artifacts are
attenuated by approximately 18 dB.
Rev. C | Page 9 of 12
ADXRS622
ADXRS622 AND SUPPLY RATIOMETRICITY
NULL ADJUSTMENT
The ADXRS622 RATEOUT and TEMP signals are ratiometric
to the VRATIO voltage, that is, the null voltage, rate sensitivity, and
temperature outputs are proportional to VRATIO. Therefore, the
ADXRS622 is most easily used with a supply-ratiometric analog-
to-digital converter (ADC) that results in self-cancellation of errors
due to minor supply variations.
The nominal 2.5 V null is for a symmetrical swing range at
RATEOUT (1B, 2A). However, a nonsymmetric output swing
may be suitable in some applications. Null adjustment is possible
by injecting a suitable current to SUMJ (1C, 2C). Note that supply
disturbances may reflect some null instability. Digital supply noise
should be avoided, particularly in this case.
There is some small error due to nonratiometric behavior. Typical
ratiometricity error for null, sensitivity, self-test, and temperature
output is outlined in Table 4.
SELF-TEST FUNCTION
The ADXRS622 includes a self-test feature that actuates each of
the sensing structures and associated electronics as if subjected
to angular rate. It is activated by standard logic high levels applied
to Input ST1 (5F, 5G), Input ST2 (4F, 4G), or both. ST1 causes
the voltage at RATEOUT to change about 0−.5 V, and ST2 causes
an opposite change of +0.5 V. The self-test response follows the
viscosity temperature dependence of the package atmosphere,
approximately 0.25%/°C.
Note that VRATIO must never be greater than AVCC
.
Table 4. Ratiometricity Error for Various Parameters
Parameter
ST1
VS = VRATIO = 4.85 V
VS = VRATIO = 5.15 V
Mean
Sigma
ST2
0.3%
0.21%
0.09%
0.19%
Activating both ST1 and ST2 simultaneously is not damaging.
ST1 and ST2 are fairly closely matched ( 5%), but actuating
both simultaneously may result in a small apparent null bias
shift proportional to the degree of self-test mismatch.
Mean
Sigma
Null
−0.15%
0.22%
−0.2%
0.2%
Mean
Sigma
Sensitivity
Mean
Sigma
VTEMP
−0.3%
0.2%
−0.05%
0.08%
ST1 and ST2 are activated by applying a voltage equal to VRATIO
to the ST1 pin and the ST2 pin. The voltage applied to ST1 and
ST2 must never be greater than AVCC
.
0.003%
0.06%
−0.25%
0.06%
CONTINUOUS SELF-TEST
The on-chip integration of the ADXRS622 gives it higher reliability
than is obtainable with any other high volume manufacturing
method. In addition, it is manufactured under a mature BIMOS
process that has field-proven reliability. As an additional failure
detection measure, power-on self-test can be performed.
However, some applications may warrant continuous self-test
while sensing rate. Details outlining continuous self-test
techniques are also available in the AN-768 Application Note.
Mean
Sigma
−0.2%
0.05%
−0.04%
0.06%
Rev. C | Page 10 of 12
ADXRS622
OUTLINE DIMENSIONS
7.05
6.85 SQ
6.70
*
A1 CORNER
INDEX AREA
A1 BALL
CORNER
7
6
5
4
3
2
1
A
B
C
D
E
F
4.80
BSC SQ
0.80
BSC
G
TOP VIEW
BOTTOM VIEW
DETAIL A
DETAIL A
3.80 MAX
3.20 MAX
2.50 MIN
0.60 MAX
0.25 MIN
0.60
0.55
0.50
COPLANARITY
0.15
SEATING
PLANE
BALL DIAMETER
*
BALL A1 IDENTIFIER IS GOLD PLATED AND CONNECTED
TO THE D/A PAD INTERNALLY VIA HOLES.
Figure 24. 32-Lead Ceramic Ball Grid Array [CBGA]
(BG-32-3)
Dimensions shown in millimeters
ORDERING GUIDE
Model1, 2
Temperature Range
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
Package Description
Package Option
ADXRS622BBGZ
ADXRS622BBGZ-RL
ADXRS622WBBGZA
ADXRS622WBBGZA-RL
EVAL-ADXRS622Z
32-Lead Ceramic Ball Grid Array [CBGA]
32-Lead Ceramic Ball Grid Array [CBGA]
32-Lead Ceramic Ball Grid Array [CBGA]
32-Lead Ceramic Ball Grid Array [CBGA]
Evaluation Board
BG-32-3
BG-32-3
BG-32-3
BG-32-3
1 Z = RoHS Compliant Part.
2 W = Qualified for Automotive Applications.
AUTOMOTIVE PRODUCTS
The ADXRS622W models are available with controlled manufacturing to support the quality and reliability requirements of automotive
applications. Note that these automotive models may have specifications that differ from the commercial models; therefore, designers
should review the Specifications section of this data sheet carefully. Only the automotive grade products shown are available for use in
automotive applications. Contact your local Analog Devices account representative for specific product ordering information and to
obtain the specific Automotive Reliability reports for these models.
Rev. C | Page 11 of 12
ADXRS622
NOTES
©2009–2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D07754-0-9/10(C)
Rev. C | Page 12 of 12
相关型号:
©2020 ICPDF网 联系我们和版权申明