HMC453QS16GETR [ADI]
HMC453QS16GETR;
| 型号： | HMC453QS16GETR |
| 厂家： | 
ADI |
| 描述： | HMC453QS16GETR 射频 微波 |
| 文件： | 总23页 (文件大小：1119K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Typical Applications
Features
The HMC453QS16G / HMC453QS16GE is ideal for
applications requiring a high dynamic range amplifier:
Output IP3: +51 dBm
21.5 dB Gain @ 400 MHz
• GSM, GPRS & EDGE
• CDMA & W-CDMA
• CATV/Cable Modem
• Fixed Wireless & WLL
8 dB Gain @ 2100 MHz
45% PAE @ +32 dBm Pout
+25 dBm CDMA2000 Channel Power@ -45 dBc ACP
Single +5V Supply
11
Integrated Power Control (VPD)
QSOP16G SMT Package: 29.4 mm2
General Description
Functional Diagram
The HMC453QS16G & HMC453QS16GE are high
dynamic range GaAs InGaP Heterojunction Bipo-
lar Transistor (HBT) 1.6 watt MMIC power amplifiers
operating between 0.4 and 2.2 GHz. Packaged in a
miniature 16 lead QSOP plastic package, the amp-
lifier gain is typically 21.5 dB at 0.4 GHz and 8 dB
at 2.1 GHz. Utilizing a minimum number of external
components and a single +5V supply, the amplifier
output IP3 can be optimized to +47 dBm at 0.4 GHz
or +51 dBm at 2.1 GHz. The power control (VPD)
can be used for full power down or RF output power/
current control. The high output IP3 and PAE
make the HMC453QS16G(E) ideal power amplifiers
for Cellular/PCS/3G, WLL, ISM and Fixed Wireless
applications.
Electrical Specifications, TA = +25°C, Vs= +5V, VPD = +5V [1]
Parameter
Frequency Range
Gain
Min.
Typ.
400 - 410
21.5
Max. Min.
Typ.
450 - 496
20.5
Max. Min.
Typ.
810 - 960
15
Max. Min.
Typ. Max. Min. Typ. Max. Units
1710 - 1990
9
2010 - 2170
8
MHz
dB
19
18
12
6
6
Gain Variation Over
Temperature
dB /
°C
0.012 0.02
0.012 0.02
0.012 0.02
0.012 0.02
0.012 0.02
Input Return Loss
12
10
15
10
12
15
10
13
15
18
dB
dB
Output Return Loss
Output Power for 1dB
Compression (P1dB)
29
44
32
32.25
47
29
47
32
32.25
50
29
46
32
32.5
49
28.5 31.5
30
48
33
33.5
51
dBm
dBm
dBm
Saturated Output
Power (Psat)
32
50
Output Third Order
Intercept (IP3) [2]
44
Noise Figure
7
8.5
725
12
7
7.5
725
12
6.5
725
12
dB
mA
mA
Supply Current (Icq)
Control Current (IPD)
725
12
725
12
[1] Specifications and data reflect HMC453QS16G measured using the respective application circuits for each designated frequency band found
herein. Contact the HMC Applications Group for assistance in optimizing performance for your application.
[2] Two-tone input power of -10 dBm per tone, 1 MHz spacing.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
rights of third parties thatmay resultfromitsuse.Specificationssubject to changewithout notice. NoPOhnoenTee:c7h8n1o-3lo2g9y-4W7a0y0, •P.OOr.dBeorxon9l1in0e6,aNtworwwwoo.adn,aMloAg.0c2o0m62-9106
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
11 - 178
Application Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are the property of their respective owners.
HMC453QS16G* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
REFERENCE MATERIALS
Quality Documentation
• HMC Legacy PCN: QS##, QS##E and QS##G,QS##GE
packages - Relocation of pre-existing production
equipment to new building
EVALUATION KITS
• HMC453QS16G Evaluation Board.
• Semiconductor Qualification Test Report: GaAs HBT-B
(QTR: 2013-00229)
DOCUMENTATION
Application Notes
DESIGN RESOURCES
• HMC453QS16G Material Declaration
• PCN-PDN Information
• AN-1363: Meeting Biasing Requirements of Externally
Biased RF/Microwave Amplifiers with Active Bias
Controllers
• Quality And Reliability
• Broadband Biasing of Amplifiers General Application Note
• MMIC Amplifier Biasing Procedure Application Note
• Symbols and Footprints
• Thermal Management for Surface Mount Components
DISCUSSIONS
General Application Note
Data Sheet
View all HMC453QS16G EngineerZone Discussions.
• HMC453QS16G Data Sheet
SAMPLE AND BUY
TOOLS AND SIMULATIONS
Visit the product page to see pricing options.
• HMC453QS16G S-Parameters
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
Gain vs.Temperature @ 400 MHz
& Return Loss @ 400 MHz
25
24
23
22
21
20
19
20
15
10
S21
S11
S22
5
18
+25 C
17
16
15
14
13
12
+85 C
-40 C
0
-5
11
-10
-15
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.35
0.37
0.39
0.41
0.43
0.45
0.45
0.45
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss
Output Return Loss
vs.Temperature @ 400 MHz
vs.Temperature @ 400 MHz
0
0
-5
+25 C
-5
-10
-15
+85 C
-40 C
-10
+25 C
-15
-20
+85 C
-40 C
0.35
0.37
0.39
0.41
0.43
0.45
0.35
0.37
0.39
0.41
0.43
FREQUENCY (GHz)
FREQUENCY (GHz)
P1dB vs.Temperature @ 400 MHz
Psat vs.Temperature @ 400 MHz
34
33
32
31
30
34
33
32
31
30
29
29
+25 C
+25 C
28
27
26
25
24
28
27
26
25
24
+85 C
-40 C
+85 C
-40 C
0.35
0.37
0.39
0.41
0.43
0.45
0.35
0.37
0.39
0.41
0.43
FREQUENCY (GHz)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
11 - 179
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Noise Figure
vs.Temperature @ 400 MHz
Output IP3 vs.Temperature @ 400 MHz
52
50
48
46
44
42
10
9
8
7
6
5
+25 C
40
+25 C
4
3
2
1
0
+85 C
-40 C
38
36
34
32
30
+85 C
-40 C
11
0.35
0.37
0.39
0.41
0.43
0.45
0.35
0.37
0.39
0.41
0.43
0.45
FREQUENCY (GHz)
FREQUENCY (GHz)
Reverse Isolation
Gain, Power & IP3
vs.Temperature @ 400 MHz
vs. Supply Voltage @ 400 MHz
0
55
50
45
-5
Gain
-10
-15
-20
-25
-30
-35
+25 C
+85 C
-40 C
P1dB
Psat
40
35
30
25
20
15
10
OIP3
0.35
0.37
0.39
0.41
0.43
0.45
4.5
4.75
5
5.25
5.5
FREQUENCY (GHz)
Vs (Vdc)
ACPR vs. Supply Voltage @ 400 MHz
W-CDMA, 64 DPCH
Power Compression @ 400 MHz
50
-10
-15
45
Pout
-20
40
35
30
25
20
15
10
5
Gain
PAE
W-CDMA
Frequency: 400 MHz
Integration BW: 3.84 MHz
-25
-30
64 DPCH
-35
-40
-45
-50
-55
-60
-65
-70
4.5V
5V
5.5V
Source ACPR
0
-10 -8 -6 -4 -2
0
2
4
6
8
10 12 14
8
10
12
14
16
18
20
22
24
26
28
INPUT POWER (dBm)
Channel Power (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
rights of third parties thatmay resultfromitsuse.Specificationssubject to changewithout notice. NoPOhnoenTee:c7h8n1o-3lo2g9y-4W7a0y0, •P.OOr.dBeorxon9l1in0e6,aNtworwwwoo.adn,aMloAg.0c2o0m62-9106
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
11 - 180
Application Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are the property of their respective owners.
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
Gain vs.Temperature @ 470 MHz
& Return Loss @ 470 MHz
25
23
22
21
20
19
18
20
15
10
5
S21
S11
S22
17
+25C
0
16
15
14
13
12
+85C
-40C
11
-5
-10
-15
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.43
0.45
0.47
0.49
0.51
0.53
0.53
0.53
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss
vs.Temperature @ 40 MHz
Output Return Loss
vs.Temperature @ 470 MHz
0
0
-2
+25C
-5
+85C
-4
-6
+25C
+85C
-40C
-40C
-10
-8
-10
-12
-14
-15
-20
0.43
0.45
0.47
0.49
0.51
0.53
0.43
0.45
0.47
0.49
0.51
FREQUENCY (GHz)
FREQUENCY (GHz)
P1dB vs.Temperature @ 470 MHz
Psat vs.Temperature @ 470 MHz
34
33
32
31
30
34
33
32
31
30
29
29
+25C
+25C
28
27
26
25
24
28
27
26
25
24
+85C
-40C
+85C
-40C
0.43
0.45
0.47
0.49
0.51
0.53
0.43
0.45
0.47
0.49
0.51
FREQUENCY (GHz)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
11 - 181
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Noise Figure
vs.Temperature @ 470 MHz
Output IP3 vs.Temperature @ 470 MHz
58
56
54
52
50
48
46
10
9
8
7
6
5
+25C
4
3
2
1
0
+85C
-40C
44
+25C
11
42
40
38
36
+85C
-40C
0.43
0.45
0.47
0.49
0.51
0.53
0.43
0.45
0.47
0.49
0.51
0.53
5.5
28
FREQUENCY (GHz)
FREQUENCY (GHz)
Reverse Isolation
vs.Temperature @ 470 MHz
Gain, Power & IP3
vs. Supply Voltage @ 470 MHz
55
50
45
40
35
30
25
20
15
10
0
-5
Gain
P1dB
Psat
-10
OIP3
+25C
+85C
-40C
-15
-20
-25
-30
4.5
4.75
5
5.25
0.43
0.45
0.47
0.49
0.51
0.53
Vs (Vdc)
FREQUENCY (GHz)
ACPR vs. Supply Voltage @ 470 MHz
W-CDMA, 64 DPCH
Power Compression @ 470 MHz
55
-10
-15
50
Pout
-20
45
40
35
30
25
20
15
10
5
Gain
PAE
W-CDMA
Frequency: 470 MHz
Integration BW: 3.84 MHz
-25
-30
64 DPCH
-35
-40
4.5V
5V
-45
5.5V
-50
-55
-60
-65
Source ACPR
0
-70
-10 -8 -6 -4 -2
0
2
4
6
8
10 12 14
8
10
12
14
16
18
20
22
24
26
INPUT POWER (dBm)
Channel Power (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
rights of third parties thatmay resultfromitsuse.Specificationssubject to changewithout notice. NoPOhnoenTee:c7h8n1o-3lo2g9y-4W7a0y0, •P.OOr.dBeorxon9l1in0e6,aNtworwwwoo.adn,aMloAg.0c2o0m62-9106
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
11 - 182
Application Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are the property of their respective owners.
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
Gain vs.Temperature @ 900 MHz
& Return Loss @ 900 MHz
20
18
17
16
15
14
13
15
10
5
0
S21
S11
S22
12
+25 C
11
10
9
+85 C
-40 C
-5
11
-10
-15
8
0.4 0.5 0.6 0.7 0.8 0.9
1
1.1 1.2 1.3 1.4
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.05
1.05
1.1
1.1
1.1
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss
Output Return Loss
vs.Temperature @ 900 MHz
vs.Temperature @ 900 MHz
0
0
+25 C
-5
-10
-15
-20
-25
+85 C
-40 C
+25 C
-5
-10
-15
+85 C
-40 C
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
0.7
0.75
0.8
0.85
0.9
0.95
1
FREQUENCY (GHz)
FREQUENCY (GHz)
P1dB vs.Temperature @ 900 MHz
Psat vs.Temperature @ 900 MHz
34
33
32
31
30
34
33
32
31
30
29
29
+25 C
+25 C
28
27
26
25
24
28
27
26
25
24
+85 C
-40 C
+85 C
-40 C
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
0.7
0.75
0.8
0.85
0.9
0.95
1
FREQUENCY (GHz)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
11 - 183
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Output IP3 vs.Temperature @ 900 MHz
Noise Figure vs.Temperature @ 900 MHz
54
52
50
48
46
10
9
8
7
6
44
5
+25 C
+25 C
42
40
38
36
34
4
3
2
1
0
+85 C
-40 C
+85 C
-40 C
11
0.75
0.8
0.85
0.9
0.95
1
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
FREQUENCY (GHz)
FREQUENCY (GHz)
Reverse Isolation
Gain, Power & IP3
vs.Temperature @ 900 MHz
vs. Supply Voltage @ 900 MHz
0
55
50
45
40
35
30
25
20
15
10
-5
-10
+25 C
+85 C
-40 C
-15
Gain
-20
-25
-30
P1dB
Psat
OIP3
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
4.5
4.75
5
5.25
5.5
FREQUENCY (GHz)
Vs (Vdc)
Gain, Power & IP3
vs. Supply Current @ 900 MHz*
ACPR vs. Supply Voltage @ 910 MHz
CDMA IS95, 9 Channels Forward
55
50
45
40
35
30
25
20
15
10
-25
-30
CDMA IS95
-35
Frequency: 910 MHz
Integration BW: 1.228 MHz
-40
Forward Link, 9 Channels
-45
4.5V
-50
5.5V
Gain
5V
-55
P1dB
Psat
OIP3
-60
-65
Source ACPR
-70
480
520
560
600
640
680
720
760
800
12
14
16
18
20
22
24
26
28
30
Icq (mA)
Channel Power (dBm)
* Icq is controlled by varying VPD.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
rights of third parties thatmay resultfromitsuse.Specificationssubject to changewithout notice. NoPOhnoenTee:c7h8n1o-3lo2g9y-4W7a0y0, •P.OOr.dBeorxon9l1in0e6,aNtworwwwoo.adn,aMloAg.0c2o0m62-9106
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
11 - 184
Application Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are the property of their respective owners.
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
Gain vs.Temperature @ 1900 MHz
& Return Loss @ 1900 MHz
15
12
11
10
9
10
5
8
S21
7
S11
S22
0
6
5
-5
-10
-15
4
+25 C
+85 C
-40 C
11
3
2
1
0
1.2
1.4
1.6
1.8
2
2.2
2.1
2.1
1.7
1.8
1.9
FREQUENCY (GHz)
2
2.1
2.1
2.1
FREQUENCY (GHz)
Input Return Loss
Output Return Loss
vs.Temperature @ 1900 MHz
vs.Temperature @ 1900 MHz
0
0
+25 C
-5
-10
-15
-20
+85 C
-40 C
+25 C
-5
+85 C
-40 C
-10
-15
1.7
1.8
1.9
2
1.7
1.8
1.9
FREQUENCY (GHz)
2
FREQUENCY (GHz)
P1dB vs.Temperature @ 1900 MHz
Psat vs.Temperature @ 1900 MHz
34
33
32
31
30
34
33
32
31
30
29
29
+25 C
+25 C
+85 C
28
27
26
25
24
28
27
26
25
24
+85 C
-40 C
-40 C
1.7
1.8
1.9
FREQUENCY (GHz)
2
1.7
1.8
1.9
FREQUENCY (GHz)
2
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
11 - 185
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Noise Figure
vs.Temperature @ 1900 MHz
Output IP3 vs.Temperature @ 1900 MHz
52
50
48
46
44
42
10
9
8
7
6
5
+25 C
40
+25 C
4
3
2
1
0
+85 C
-40 C
38
36
34
32
30
+85 C
-40 C
11
1.7
1.8
1.9
FREQUENCY (GHz)
2
2.1
1.7
1.8
1.9
FREQUENCY (GHz)
2
2.1
Gain, Power & IP3
Reverse Isolation
vs. Supply Voltage @ 1900 MHz
vs.Temperature @ 1900 MHz
0
55
50
45
40
35
30
25
20
15
10
5
-5
+25 C
-10
+85 C
-40 C
Gain
P1dB
Psat
-15
OIP3
-20
1.7
1.8
1.9
2
2.1
4.5
4.75
5
5.25
5.5
FREQUENCY (GHz)
Vs (Vdc)
Gain, Power & IP3
ACPR vs. Supply Voltage @ 1960 MHz
vs. Supply Current @ 1900 MHz*
CDMA 2000, 9 Channels Forward
55
50
45
40
35
30
25
20
15
10
5
-30
-35
CDMA2000
Frequency: 1.96 GHz
-40
-45
-50
-55
-60
-65
-70
Integration BW: 1.228 MHz
Forward Link, SR1, 9 Channels
5V
4.5V
5.5V
Gain
P1dB
Psat
OIP3
Source ACPR
22
480
520
560
600
640
680
720
760
800
14
16
18
20
24
26
28
Icq (mA)
Channel Power (dBm)
* Icq is controlled by varying VPD.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
rights of third parties thatmay resultfromitsuse.Specificationssubject to changewithout notice. NoPOhnoenTee:c7h8n1o-3lo2g9y-4W7a0y0, •P.OOr.dBeorxon9l1in0e6,aNtworwwwoo.adn,aMloAg.0c2o0m62-9106
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
11 - 186
Application Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are the property of their respective owners.
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
Gain vs.Temperature @ 2100 MHz
& Return Loss @ 2100 MHz
10
10
9
5
0
8
7
6
-5
5
+25 C
4
3
2
1
0
+85 C
-40 C
-10
11
S21
S11
S22
-15
-20
1
1.2 1.4 1.6 1.8
2
2.2 2.4 2.6 2.8
3
1.9
2
2.1
FREQUENCY (GHz)
2.2
2.3
2.3
2.3
FREQUENCY (GHz)
Input Return Loss
vs.Temperature @ 2100 MHz
Output Return Loss
vs.Temperature @ 2100 MHz
0
0
+25 C
-5
-10
-15
-20
-25
-5
+85 C
-40 C
+25 C
+85 C
-40 C
-10
-15
-20
-25
1.9
2
2.1
2.2
2.3
1.9
2
2.1
2.2
FREQUENCY (GHz)
FREQUENCY (GHz)
P1dB vs.Temperature @ 2100 MHz
Psat vs.Temperature @ 2100 MHz
36
34
32
30
36
34
32
30
28
26
24
22
20
+25 C
+85 C
-40 C
28
26
24
22
20
+25 C
+85 C
-40 C
1.9
2
2.1
2.2
2.3
1.9
2
2.1
2.2
FREQUENCY (GHz)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
11 - 187
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Noise Figure
vs.Temperature @ 2100 MHz
Output IP3 vs.Temperature @ 2100 MHz
60
10
9
55
50
8
7
6
45
5
4
+25 C
+25 C
40
35
30
+85 C
-40 C
3
2
1
0
+85 C
-40 C
11
1.9
2
2.1
FREQUENCY (GHz)
2.2
2.3
1.9
2
2.1
FREQUENCY (GHz)
2.2
2.3
Reverse Isolation
Gain, Power & IP3
vs.Temperature @ 2100 MHz
vs. Supply Voltage @ 2100 MHz
0
60
50
40
-5
+25 C
-10
30
+85 C
-40 C
Gain
P1dB
20
Psat
OIP3
-15
10
-20
0
1.9
2
2.1
2.2
2.3
4.5
4.75
5
5.25
5.5
FREQUENCY (GHz)
Vs (Vdc)
ACPR vs. Supply Voltage @ 2140 MHz
W-CDMA, 64 DPCH
Power Compression @ 2100 MHz
50
-20
45
Pout
40
-25
Gain
4.5V
PAE
W-CDMA
-30
35
Frequency: 2.14 GHz
30
25
20
15
10
5
Integration BW: 3.84 MHz
-35
5V
64 DPCH
-40
5.5V
-45
-50
-55
-60
-65
0
Source ACPR
18 20
10
12
14
16
18
20
22
24
26
28
12
14
16
22
24
26
28
INPUT POWER (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
rights of third parties thatmay resultfromitsuse.Specificationssubject to changewithout notice. NoPOhnoenTee:c7h8n1o-3lo2g9y-4W7a0y0, •P.OOr.dBeorxon9l1in0e6,aNtworwwwoo.adn,aMloAg.0c2o0m62-9106
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
11 - 188
Application Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are the property of their respective owners.
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Power Dissipation
Absolute Maximum Ratings
4.5
Collector Bias Voltage (Vcc)
+6.0 Vdc
+5.4 Vdc
+32 dBm
150 °C
Control Voltage (Vpd)
4
Max Pdiss @ +85C
RF Input Power (RFIN)(Vs = Vpd = +5Vdc)
Junction Temperature
3.5
3
1900 MHz
Continuous Pdiss (T = 85 °C)
(derate 58.5 mW/°C above 85 °C)
3.8 W
2.5
2
Thermal Resistance
(junction to ground paddle)
17.1 °C/W
11
900 MHz
Storage Temperature
Operating Temperature
-65 to +150 °C
-40 to +85 °C
1.5
1
0
5
10
15
20
25
INPUT POWER (dBm)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H453
XXXX
HMC453QS16G
HMC453QS16GE
Low Stress Injection Molded Plastic
Sn/Pb Solder
H453
XXXX
MSL1 [2]
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
11 - 189
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1, 2, 4, 5,
7-10, 13-16
These pins & package bottom must be connected to
RF/DC ground.
GND
Power control pin. For maximum power, this pin should be
connected to 5V. A higher voltage is not recommended. For
lower idle current, this voltage can be reduced.
3
VPD
11
This pin is DC coupled.
Off chip matching components are required.
See Application Circuit herein.
6
RFIN
RF output and DC Bias input for the output amplifier stage.
Off chip matching components are required.
See Application Circuit herein.
11, 12
RFOUT
400 MHz Application Circuit
This circuit was used to specify the performance for 400-410 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
Recommended Component Values
C1, C5
C2, C10
C3
12 pF
8.2 pF
6.8 pF
100 pF
39 pF
C4, C7
C6
TL1
TL2
TL3
TL4
TL5
TL6
C8, C9
L1
2.2 μF
47 nH
Impedance
50 Ohm 50 Ohm 50 Ohm 50 Ohm 50 Ohm 50 Ohm
Physical Length
Electrical Length
0.22”
5°
0.04”
1°
0.04”
1°
0.16”
4°
0.04”
1°
0.05”
1°
L2
40 nH
4.3 nH
5.1 Ohm
L3, L4
R1
PCB Material: 10 mil Rogers 4350, Er = 3.48
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
rights of third parties thatmay resultfromitsuse.Specificationssubject to changewithout notice. NoPOhnoenTee:c7h8n1o-3lo2g9y-4W7a0y0, •P.OOr.dBeorxon9l1in0e6,aNtworwwwoo.adn,aMloAg.0c2o0m62-9106
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
11 - 190
Application Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are the property of their respective owners.
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
400 MHz Evaluation PCB
11
List of Materials for Evaluation PCB 110865-400 [1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of VIA holes should be used
to connect the top and bottom ground planes. The
evaluation board should be mounted to an appropri-
ate heat sink. The evaluation circuit board shown is
available from Hittite upon request.
Item
Description
J1 - J2
J3
PCB Mount SMA Connector
2 mm DC Header
C1, C5
C2, C10
C3
12 pF Capacitor, 0402 Pkg.
8.2 pF Capacitor, 0402 Pkg.
6.8 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
39 pF Capacitor, 0402 Pkg.
2.2 μF Capacitor, Tantalum
47 nH Inductor, 0603 Pkg.
40 nH Inductor, 0402 Pkg.
4.3 nH Inductor, 0402 Pkg.
5.1 Ohm Resistor, 0402 Pkg.
C4, C7
C6
C8, C9
L1
L2
L3, L4
R1
HMC453QS16G / HMC453QS16GE
Linear Amp
U1
[2]
PCB
110863 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
11 - 191
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.2 - 2.4 GHz
470 MHz Application Circuit
This circuit was used to specify the performance for 450-496 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
11
Recommended Component Values
C1
C2
12 pF
8.2 pF
6.8 pF
100 pF
10 pF
C3
C4, C7
C5
C6
39 pF
C8, C9
C10
L1
2.2 μF
5.6 pF
47 nH
TL1
TL2
TL3
TL4
TL5
TL6
Impedance
50 Ohm 50 Ohm 50 Ohm 50 Ohm 50 Ohm 50 Ohm
Physical Length
Electrical Length
0.22”
6°
0.04”
1°
0.04”
1°
0.16”
4°
0.04”
1°
0.05”
1°
L2
40 nH
4.3 nH
5.1 Ohm
L3, L4
R1
PCB Material: 10 mil Rogers 4350, Er = 3.48
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
rights of third parties thatmay resultfromitsuse.Specificationssubject to changewithout notice. NoPOhnoenTee:c7h8n1o-3lo2g9y-4W7a0y0, •P.OOr.dBeorxon9l1in0e6,aNtworwwwoo.adn,aMloAg.0c2o0m62-9106
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
11 - 192
Application Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are the property of their respective owners.
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.2 - 2.4 GHz
470 MHz Evaluation PCB
11
List of Materials for Evaluation PCB 110976-470 [1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropri-
ate heat sink. The evaluation circuit board shown is
available from Hittite upon request.
Item
J1 - J2
J3
Description
PCB Mount SMA Connector
2 mm DC Header
C1
12 pF Capacitor, 0402 Pkg.
8.2 pF Capacitor, 0402 Pkg.
6.8 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
10 pF Capacitor, 0402 Pkg.
39 pF Capacitor, 0402 Pkg.
2.2 μF Capacitor, Tantalum
5.6 pF Capacitor, 0402 Pkg.
47 nH Inductor, 0603 Pkg.
40 nH Inductor, 0402 Pkg.
4.3 nH Inductor, 0402 Pkg.
5.1 Ohm Resistor, 0402 Pkg.
C2
C3
C4, C7
C5
C6
C8, C9
C10
L1
L2
L3, L4
R1
HMC453QS16G / HMC453QS16GE
Linear Amp
U1
[2]
PCB
110863 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
11 - 193
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.2 - 2.4 GHz
900 MHz Application Circuit
This circuit was used to specify the performance for 810-960 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
11
TL1
TL2
TL3
TL4
Recommended Component Values
Impedance
50 Ohm 50 Ohm 50 Ohm 50 Ohm
C1
C2, C3
C4, C7
C5
5 pF
3.3 pF
100 pF
8.2 pF
56 pF
Physical Length
Electrical Length
0.26”
14°
0.08”
4°
0.12”
6°
0.15”
8°
PCB Material: 10 mil Rogers 4350, Er = 3.48
C6
C8, C9
C10
L1
2.2 μF
1 pF
30 nH
20 nH
5.6 Ohm
L2
R1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
rights of third parties thatmay resultfromitsuse.Specificationssubject to changewithout notice. NoPOhnoenTee:c7h8n1o-3lo2g9y-4W7a0y0, •P.OOr.dBeorxon9l1in0e6,aNtworwwwoo.adn,aMloAg.0c2o0m62-9106
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
11 - 194
Application Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are the property of their respective owners.
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.2 - 2.4 GHz
900 MHz Evaluation PCB
11
List of Materials for Evaluation PCB 108709-900 [1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropri-
ate heat sink. The evaluation circuit board shown is
available from Hittite upon request.
Item
J1 - J2
J3
Description
PCB Mount SMA Connector
2 mm DC Header
C1
5.0 pF Capacitor, 0402 Pkg.
3.3 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
8.2 pF Capacitor, 0402 Pkg.
56 pF Capacitor, 0402 Pkg.
2.2 μF Capacitor, Tantalum
1.0 pF Capacitor, 0402 Pkg.
30 nH Inductor, 0402 Pkg.
20 nH Inductor, 0402 Pkg.
5.6 Ohm Resistor, 0402 Pkg.
C2, C3
C4, C7
C5
C6
C8, C9
C10
L1
L2
R1
HMC453QS16G / HMC453QS16GE
Linear Amp
U1
[2]
PCB
108707 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
11 - 195
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.2 - 2.4 GHz
1900 MHz Application Circuit
Thiscircuitwasusedtospecifytheperformancefor1710-1990MHzoperation. ContacttheHMCApplications
Group for assistance in optimizing performance for your application.
11
TL1
50 Ohm
0.04”
4°
TL2
50 Ohm
0.04”
4°
Recommended Component Values
Impedance
C1
C2
0.8 pF
1.2 pF
Physical Length
Electrical Length
C3, C6
C4
100 pF
4.7 pF
15 pF
PCB Material: 10 mil Rogers 4350, Er = 3.48
C5
C7, C8
L1
2.2 μF
18 nH
L2
20 nH
R1
5.6 Ohms
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
rights of third parties thatmay resultfromitsuse.Specificationssubject to changewithout notice. NoPOhnoenTee:c7h8n1o-3lo2g9y-4W7a0y0, •P.OOr.dBeorxon9l1in0e6,aNtworwwwoo.adn,aMloAg.0c2o0m62-9106
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
11 - 196
Application Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are the property of their respective owners.
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.2 - 2.4 GHz
1900 MHz Evaluation PCB
11
List of Materials for Evaluation PCB 108721-1900 [1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropri-
ate heat sink. The evaluation circuit board shown is
available from Hittite upon request.
Item
J1 - J2
J3
Description
PCB Mount SMA Connector
2 mm DC Header
C1
0.8 pF Capacitor, 0402 Pkg.
1.2 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
4.7 pF Capacitor, 0402 Pkg.
15 pF Capacitor, 0402 Pkg.
2.2 μF Capacitor, Tantalum
18 nH Inductor, 0402 Pkg.
20 nH Inductor, 0402 Pkg.
5.6 Ohm Resistor, 0402 Pkg.
C2
C3, C6
C4
C5
C7, C8
L1
L2
R1
HMC453QS16G / HMC453QS16GE
Linear Amp
U1
[2]
PCB
108719 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
11 - 197
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.2 - 2.4 GHz
2100 MHz Application Circuit
This circuit was used to specify the performance for 2100-2170 MHz operation. Contact the HMC
Applications Group for assistance in optimizing performance for your application.
11
TL1
50 Ohm
0.04”
5°
TL2
50 Ohm
0.04”
5°
Recommended Component Values
Impedance
C1
C2
0.8 pF
1 pF
Physical Length
Electrical Length
C3, C6
C4
100 pF
3.9 pF
15 pF
PCB Material: 10 mil Rogers 4350, Er = 3.48
C5
C7, C8
L1
2.2 μF
12 nH
20 nH
5.1 Ohm
L2
R1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
rights of third parties thatmay resultfromitsuse.Specificationssubject to changewithout notice. NoPOhnoenTee:c7h8n1o-3lo2g9y-4W7a0y0, •P.OOr.dBeorxon9l1in0e6,aNtworwwwoo.adn,aMloAg.0c2o0m62-9106
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
11 - 198
Application Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are the property of their respective owners.
HMC453QS16G / 453QS16GE
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.2 - 2.4 GHz
2100 MHz Evaluation PCB
11
List of Materials for Evaluation PCB 109994-2100 [1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropri-
ate heat sink. The evaluation circuit board shown is
available from Hittite upon request.
Item
J1 - J2
J3
Description
PCB Mount SMA Connector
2 mm DC Header
C1
0.8 pF Capacitor, 0402 Pkg.
1.0 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
3.9 pF Capacitor, 0402 Pkg.
15 pF Capacitor, 0402 Pkg.
2.2 μF Capacitor, Tantalum
12 nH Inductor, 0402 Pkg.
20 nH Inductor, 0402 Pkg.
5.1 Ohm Resistor, 0402 Pkg.
C2
C3, C6
C4
C5
C7, C8
L1
L2
R1
HMC453QS16G / HMC453QS16GE
Linear Amp
U1
[2]
PCB
108719 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
11 - 199
相关型号：
©2020 ICPDF网 联系我们和版权申明