HMC453ST89ETR [ADI]
HMC453ST89ETR;型号: | HMC453ST89ETR |
厂家: | ADI |
描述: | HMC453ST89ETR 射频 微波 |
文件: | 总23页 (文件大小:1141K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Typical Applications
Features
The HMC453ST89 / HMC453ST89E is ideal for
applications requiring a high dynamic range amplifier:
Output IP3: +49 dBm
20.5 dB Gain @ 400 MHz
7.5 dB Gain @ 2100 MHz
41% PAE @ +32.5 dBm Pout
• GSM, GPRS & EDGE
• CDMA & W-CDMA
• CATV/Cable Modem
• Fixed Wireless
+26 dBm CDMA2000
Channel Power @ -45 dBc ACP
9
Included in the HMC-DK002 Designer’s Kit
Functional Diagram
General Description
The HMC453ST89
& HMC453ST89E are high
dynamic range GaAs InGaP HBT 1.6 Watt MMIC power
amplifiers operating from 0.4 to 2.2 GHz and packaged
in industry standard SOT89 packages. Utilizing a
minimum number of external components and a single
+5V supply, the amplifier output IP3 can be optimized
to +47 dBm at 0.4 GHz or +49 dBm at 2.1 GHz. The
high output IP3 and PAE make the HMC453ST89 &
HMC453ST89E ideal power amplifiers for Cellular/
PCS/3G and Fixed Wireless applications.
Electrical Specifications, TA = +25°C, Vs= +5V [1]
Parameter
Frequency Range
Gain
Min.
Typ.
400 - 410
20.5
Max. Min.
Typ.
450 - 496
19
Max Min.
Typ.
810 - 960
14.5
Max. Min.
Typ.
1710 - 1990
8.5
Max. Min.
Typ.
2010 - 2170
7.5
Max. Units
MHz
18
16.5
12
6
6
dB
Gain Variation Over
Temperature
dB /
0.012 0.02
0.012 0.02
0.012 0.02
0.012 0.02
0.012 0.02
°C
dB
dB
Input Return Loss
Output Return Loss
20
12
14
12
20
13
15
15
13
18
Output Power for
1dB
Compression (P1dB)
28.5
44
31.5
29
45
32
28.5
44
31.5
29
46
32
29.5
46
32.5
dBm
Saturated Output
Power (Psat)
32
47
32.25
48
31.75
47
32.5
49
32.75
49
dBm
dBm
Output Third Order
Intercept (IP3) [2]
Noise Figure
9
9
6.5
7
6.5
dB
Supply Current (Icq)
725
725
725
725
725
mA
[1] Specifications and data reflect HMC453ST89 measured using the respective application circuits for each designated frequency band found herein.
Contact the HMC Applications Group for assistance in optimizing performance for your application.
[2] Two-tone input power of 0 dBm per tone, 1 MHz spacing.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
9 - 168
Application Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
HMC453ST89* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
REFERENCE MATERIALS
Quality Documentation
• Package/Assembly Qualification Test Report: 3 Lead
Plastic SOT89 Package (QTR: 10002 REV: 02)
EVALUATION KITS
• Semiconductor Qualification Test Report: GaAs HBT-B
(QTR: 2013-00229)
• HMC453ST89 Evaluation Board.
DOCUMENTATION
Application Notes
DESIGN RESOURCES
• HMC453ST89 Material Declaration
• PCN-PDN Information
• AN-1363: Meeting Biasing Requirements of Externally
Biased RF/Microwave Amplifiers with Active Bias
Controllers
• Quality And Reliability
• Broadband Biasing of Amplifiers General Application Note
• MMIC Amplifier Biasing Procedure Application Note
• Symbols and Footprints
DISCUSSIONS
View all HMC453ST89 EngineerZone Discussions.
• Thermal Management for Surface Mount Components
General Application Note
Data Sheet
• HMC453ST89 Data Sheet
SAMPLE AND BUY
Visit the product page to see pricing options.
TOOLS AND SIMULATIONS
• HMC453ST89 S-Parameters
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
& Return Loss @ 400
Gain vs.Temperature @ 400 MHz
25
20
15
10
5
23
22
21
20
19
18
S21
S11
S22
0
17
+25 C
-5
16
15
14
13
12
+85 C
-40 C
-10
-15
-20
-25
9
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.35
0.37
0.39
0.41
0.43
0.45
0.45
0.45
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss
Output Return Loss
vs.Temperature @ 400 MHz
vs.Temperature @ 400 MHz
0
0
-5
-10
-15
-5
+25 C
-10
-15
-20
-25
+85 C
-40 C
-20
+25 C
+85 C
-40 C
-25
-30
0.35
0.37
0.39
0.41
0.43
0.45
0.35
0.37
0.39
0.41
0.43
FREQUENCY (GHz)
FREQUENCY (GHz)
P1dB vs.Temperature @ 400 MHz
Psat vs.Temperature @ 400 MHz
34
33
32
31
30
34
33
32
31
30
29
29
+25 C
+25 C
28
27
26
25
24
28
27
26
25
24
+85 C
-40 C
+85 C
-40 C
0.35
0.37
0.39
0.41
0.43
0.45
0.35
0.37
0.39
0.41
0.43
FREQUENCY (GHz)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 169
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Noise Figure
vs.Temperature @ 400 MHz
Output IP3 vs.Temperature @ 400 MHz
52
50
48
46
44
11
10
9
8
7
42
6
+25 C
+25 C
40
38
36
34
32
30
5
+85 C
-40 C
+85 C
-40 C
4
9
3
2
1
0
0.35
0.37
0.39
0.41
0.43
0.45
0.35
0.37
0.39
0.41
0.43
0.45
FREQUENCY (GHz)
FREQUENCY (GHz)
Reverse Isolation
Gain, Power & IP3
vs.Temperature @ 400 MHz
vs. Supply Voltage @ 400 MHz
55
50
45
40
35
30
25
20
15
10
0
-5
Gain
P1dB
Psat
-10
+25 C
OIP3
+85 C
-40 C
-15
-20
-25
-30
4.5
4.75
5
5.25
5.5
0.35
0.37
0.39
0.41
0.43
0.45
Vs (Vdc)
FREQUENCY (GHz)
ACPR vs. Supply Voltage @ 400 MHz
W-CDMA, 64 DPCH
Power Compression @ 400 MHz
45
-10
-15
40
Pout
-20
Gain
W-CDMA
Frequency: 400 MHz
35
30
25
20
15
10
5
PAE
-25
Integration BW: 3.84 MHz
64 DPCH
-35
-30
-40
-45
-50
-55
-60
-65
-70
4.5V
5V
5.5V
Source ACPR
0
0
2
4
6
8
10
12
14
16
8
10
12
14
16
18
20
22
24
26
28
INPUT POWER (dBm)
Channel Power (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 170
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
Gain vs.Temperature @ 470 MHz
& Return Loss @ 470 MHz
25
23
22
21
20
19
18
17
20
15
10
5
S21
S11
S22
0
16
+25 C
+85 C
-40 C
9
15
14
13
12
-5
-10
-15
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.43
0.45
0.47
0.49
0.51
0.53
0.53
0.53
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss
Output Return Loss
vs.Temperature @ 470 MHz
vs.Temperature @ 470 MHz
0
0
+25 C
+85 C
-40 C
+25 C
-5
-5
-10
-15
-20
+85 C
-40 C
-10
-15
-20
0.43
0.45
0.47
0.49
0.51
0.53
0.43
0.45
0.47
0.49
0.51
FREQUENCY (GHz)
FREQUENCY (GHz)
P1dB vs.Temperature @ 470 MHz
Psat vs.Temperature @ 470 MHz
34
33
32
31
30
34
33
32
31
30
29
29
+25 C
+25 C
28
27
26
25
24
28
27
26
25
24
+85 C
-40 C
+85 C
-40 C
0.43
0.45
0.47
0.49
0.51
0.53
0.43
0.45
0.47
0.49
0.51
FREQUENCY (GHz)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 171
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Noise Figure
vs.Temperature @ 470 MHz
Output IP3 vs.Temperature @ 470 MHz
52
50
48
46
44
11
10
9
8
7
42
6
+25 C
+25 C
40
38
36
34
32
30
5
4
3
2
1
0
+85 C
-40 C
+85 C
-40 C
9
0.43
0.45
0.47
0.49
0.51
0.53
0.53
16
0.43
0.45
0.47
0.49
0.51
0.53
FREQUENCY (GHz)
FREQUENCY (GHz)
Reverse Isolation
vs.Temperature @ 470 MHz
Gain, Power & IP3
vs. Supply Voltage @ 470 MHz
50
0
45
40
35
30
25
20
15
10
-5
Gain
P1dB
Psat
OIP3
-10
+25 C
+85 C
-40 C
-15
-20
-25
-30
4.5
4.75
5
5.25
5.5
0.43
0.45
0.47
0.49
0.51
Vs (Vdc)
FREQUENCY (GHz)
ACPR vs. Supply Voltage @ 470 MHz
W-CDMA, 64 DPCH
Power Compression @ 470 MHz
50
-10
-15
45
-20
40
35
30
25
20
15
10
5
Pout
Gain
PAE
W-CDMA
Frequency: 470 MHz
Integration BW: 3.84 MHz
-25
-30
64 DPCH
-35
-40
4.5V
5V
-45
5.5V
-50
-55
-60
-65
Source ACPR
0
-70
0
2
4
6
8
10
12
14
8
10
12
14
16
18
20
22
24
26
28
INPUT POWER (dBm)
Channel Power (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 172
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
Gain vs.Temperature @ 900 MHz
& Return Loss @ 900 MHz
20
18
17
16
15
14
13
15
10
5
0
S21
S11
S22
12
-5
+25C
11
10
9
+85C
-40C
9
-10
-15
-20
8
0.4 0.5 0.6 0.7 0.8 0.9
1
1.1 1.2 1.3 1.4
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.05
1.05
1.1
1.1
1.1
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss
Output Return Loss
vs.Temperature @ 900 MHz
vs.Temperature @ 900 MHz
0
0
-5
+25C
+25C
-5
-10
-15
-20
+85C
+85C
-40C
-40C
-10
-15
-20
-25
-30
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
0.7
0.75
0.8
0.85
0.9
0.95
1
FREQUENCY (GHz)
FREQUENCY (GHz)
P1dB vs.Temperature @ 900 MHz
Psat vs.Temperature @ 900 MHz
34
33
32
31
30
34
33
32
31
30
29
29
+25C
+25C
28
27
26
25
24
28
27
26
25
24
+85C
-40C
+85C
-40C
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
0.7
0.75
0.8
0.85
0.9
0.95
1
FREQUENCY (GHz)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 173
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Noise Figure
vs. Temperature @ 900 MHz
Output IP3 vs. Temperature @ 900 MHz
55
10
9
50
8
7
45
6
5
+25C
40
35
30
4
+85C
-40C
+25C
3
2
1
0
+85C
-40C
9
0.75
0.8
0.85
0.9
0.95
1
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
FREQUENCY (GHz)
FREQUENCY (GHz)
Reverse Isolation
Gain, Power & IP3
vs. Temperature @ 900 MHz
vs. Supply Voltage @ 900 MHz
55
50
45
40
35
30
25
20
15
10
0
-5
Gain
P1dB
Psat
+25C
-10
-15
-20
-25
-30
+85C
-40C
OIP3
4.5
4.75
5
5.25
5.5
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
Vs (Vdc)
FREQUENCY (GHz)
ACPR vs. Supply Voltage @ 910 MHz
CDMA IS95, 9 Channels Forward
Power Compression @ 900 MHz
55
-10
-15
50
-20
45
Pout
CDMA IS95
Frequency: 910 MHz
Integration BW: 1.228 MHz
-25
40
35
30
25
20
15
10
5
Gain
PAE
-30
Forward Link, 9 Channels
-35
-40
-45
4.5V
-50
-55
5V
5.5V
-60
-65
Source ACPR
0
-70
8
10
12
14
16
18
20
22
24
26
4
6
8
10
12
14
16
18
20
Channel Power (dBm)
INPUT POWER (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 174
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
Gain vs.Temperature @ 1900 MHz
& Return Loss @ 1900 MHz
15
12
11
10
9
10
5
8
0
7
-5
6
5
-10
-15
-20
-25
+25 C
+85 C
-40 C
4
3
2
1
0
9
S21
S11
S22
1
1.2 1.4 1.6 1.8
2
2.2 2.4 2.6 2.8
3
1.7
1.8
1.9
FREQUENCY (GHz)
2
2.1
2.1
2.1
FREQUENCY (GHz)
Input Return Loss
vs.Temperature @ 1900 MHz
Output Return Loss
vs.Temperature @ 1900 MHz
0
0
+25 C
+85 C
-40 C
+25 C
+85 C
-40 C
-5
-10
-15
-20
-25
-5
-10
-15
-20
-25
1.7
1.8
1.9
FREQUENCY (GHz)
2
2.1
1.7
1.8
1.9
FREQUENCY (GHz)
2
P1dB vs.Temperature @ 1900 MHz
Psat vs.Temperature @ 1900 MHz
36
35
34
33
32
31
30
29
36
35
34
33
32
31
30
29
+25 C
28
28
27
26
25
24
+85 C
-40 C
+25 C
+85 C
-40 C
27
26
25
24
1.7
1.8
1.9
FREQUENCY (GHz)
2
2.1
1.7
1.8
1.9
FREQUENCY (GHz)
2
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 175
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Noise Figure
vs.Temperature @ 1900 MHz
Output IP3 vs.Temperature @ 1900 MHz
52
50
48
46
44
42
40
10
9
8
7
6
5
4
3
2
1
0
+25 C
+85 C
-40 C
38
+25 C
+85 C
-40 C
9
36
34
32
30
1.7
1.8
1.9
FREQUENCY (GHz)
2
2.1
1.7
1.8
1.9
FREQUENCY (GHz)
2
2.1
Reverse Isolation
Gain, Power & IP3
vs.Temperature @ 1900 MHz
vs. Supply Voltage @ 1900 MHz
55
50
45
40
35
30
0
-5
+25 C
-10
-15
-20
+85 C
-40 C
25
Gain
P1dB
20
15
Psat
OIP3
10
5
4.5
4.75
5
5.25
5.5
1.7
1.8
1.9
FREQUENCY (GHz)
2
2.1
Vs (Vdc)
ACPR vs. Supply Voltage @ 1960 MHz
Power Compression @ 1900 MHz
CDMA 2000, 9 Channels Forward
40
-30
-35
35
Pout
Gain
-40
-45
-50
-55
-60
-65
-70
-75
-80
CDMA2000
PAE
30
Frequency: 1.96 GHz
Integration BW: 1.228 MHz
Forward Link, SR1, 9 Channels
4.5V
5V
5.5V
25
20
15
10
5
0
10
12
14
16
18
20
22
24
26
28
14
16
18
20
22
24
26
28
INPUT POWER (dBm)
OUTPUT CHANNEL POWER (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 176
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
Gain vs.Temperature @ 2100 MHz
& Return Loss @ 2100 MHz
10
10
9
5
0
8
7
6
-5
5
-10
4
3
2
1
0
+25 C
+85 C
-40 C
9
-15
-20
S21
S11
S22
-25
1
1.2 1.4 1.6 1.8
2
2.2 2.4 2.6 2.8
3
1.9
2
2.1
FREQUENCY (GHz)
2.2
2.3
2.3
2.3
FREQUENCY (GHz)
Input Return Loss
vs.Temperature @ 2100 MHz
Output Return Loss
vs.Temperature @ 2100 MHz
0
0
-5
+25 C
+85 C
-40 C
-5
-10
-15
-20
+25 C
+85 C
-40 C
-10
-15
-20
-25
-30
1.9
2
2.1
FREQUENCY (GHz)
2.2
2.3
1.9
2
2.1
FREQUENCY (GHz)
2.2
P1dB vs.Temperature @ 2100 MHz
Psat vs.Temperature @ 2100 MHz
35
34
33
32
31
30
29
35
34
33
32
31
30
29
28
27
26
25
+25 C
+85 C
-40 C
28
+25 C
+85 C
27
26
25
-40 C
1.9
2
2.1
FREQUENCY (GHz)
2.2
2.3
1.9
2
2.1
FREQUENCY (GHz)
2.2
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 177
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Noise Figure
vs.Temperature @ 2100 MHz
Output IP3 vs.Temperature @ 2100 MHz
52
50
48
46
44
10
9
8
7
6
42
5
+25 C
+85 C
-40 C
40
38
36
34
32
30
4
3
2
1
0
+25 C
+85 C
-40 C
9
1.9
2
2.1
FREQUENCY (GHz)
2.2
2.3
1.9
2
2.1
FREQUENCY (GHz)
2.2
2.3
Reverse Isolation
Gain, Power & IP3
vs.Temperature @ 2100 MHz
vs. Supply Voltage @ 2100 MHz
55
50
45
40
35
30
0
-5
+25 C
-10
+85 C
-40 C
25
Gain
P1dB
20
15
Psat
-15
OIP3
10
5
-20
4.5
4.75
5
5.25
5.5
1.9
2
2.1
2.2
2.3
Vs (Vdc)
FREQUENCY (GHz)
ACPR vs. Supply Voltage @ 2140 MHz
W-CDMA, 64 DPCH
Power Compressions @ 2100 MHz
45
-20
40
-25
Pout
4.5V
Gain
W-CDMA
-30
PAE
35
30
25
20
15
10
5
Frequency: 2.14 GHz
Integration BW: 3.84 MHz
-35
5V
64 DPCH
-40
5.5V
-45
-50
-55
-60
Source ACPR
0
-65
12
14
16
18
20
22
24
26
28
10
12
14
16
18
20
22
24
26
28
OUTPUT CHANNEL POWER (dBm)
INPUT POWER (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 178
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Power Dissipation
Absolute Maximum Ratings
4.5
Collector Bias Voltage (Vcc)
RF Input Power (RFIN)(Vs +5Vdc)
Junction Temperature
+6.0 Vdc
+32 dBm
150 °C
Max Pdiss @ +85 C
4
3.5
3
Continuous Pdiss (T = 85 °C)
(derate 58.5 mW/°C above 85 °C)
3.8 W
2100 MHz
Thermal Resistance
2.5
2
17.1 °C/W
(junction to ground paddle)
9
Storage Temperature
Operating Temperature
-65 to +150 °C
-40 to +85 °C
1900 MHz
1.5
1
0
5
10
15
20
25
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
INPUT POWER (dBm)
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL:
MOLDING COMPOUND MP-180S OR EQUIVALENT.
2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING.
3. LEAD PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS]
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H453
XXXX
HMC453ST89
Low Stress Injection Molded Plastic
Sn/Pb Solder
H453
XXXX
MSL1 [2]
HMC453ST89E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 179
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
This pin is DC coupled.
1
RFIN
RFOUT
GND
Off chip matching components are required.
See Application Circuit herein.
RF output and DC Bias input for the amplifier.
Off chip matching components are required.
See Application Circuit herein.
3
9
These pins & package bottom must be connected to
RF/DC ground.
2, 4
400 MHz Application Circuit
This circuit was used to specify the performance for 400-410 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
TL1
50 Ohm
0.16”
4°
TL2
50 Ohm
0.04”
1°
TL3
50 Ohm
0.06”
1°
TL4
50 Ohm
0.21”
5°
TL5
50 Ohm
0.04”
1°
TL6
50 Ohm
0.10”
2°
Recommended Component Values
Impedance
C1, C4
C2, C3
C5
10 pF
8.2 pF
39 pF
Physical Length
Electrical Length
PCB Material: 10 mil Rogers 4350, Er = 3.48
C6
100 pF
12 pF
C7
C8
2.2 μF
47 nH
40 nH
4.3 nH
5.1 nH
5.1 Ohm
L1
L2
L3
L4
R1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 180
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
400 MHz Evaluation PCB
9
List of Materials for Evaluation PCB 110957-400 [1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
Item
J1 - J2
J3
Description
PCB Mount SMA Connector
2 mm DC Header
C1, C4
C2, C3
C5
10 pF Capacitor, 0402 Pkg.
8.2 pF Capacitor, 0402 Pkg.
39 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
12 pF Capacitor, 0402 Pkg.
2.2 μF Capacitor, Tantalum
47 nH Inductor, 0603 Pkg.
40 nH Inductor, 0402 Pkg.
4.3 nH Inductor, 0402 Pkg.
5.1 nH Inductor, 0402 Pkg.
5.1 Ohm Resistor, 0402 Pkg.
C6
C7
C8
L1
L2
L3
L4
R1
HMC453ST89 / HMC453ST89E
Linear Amp
U1
[2]
PCB
110955 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 181
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
470 MHz Application Circuit
This circuit was used to specify the performance for 450-496 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
9
TL1
50 Ohm
0.16”
4°
TL2
50 Ohm
0.04”
1°
TL3
50 Ohm
0.06”
2°
TL4
50 Ohm
0.21”
6°
TL5
50 Ohm
0.04”
1°
TL6
50 Ohm
0.10”
3°
Recommended Component Values
Impedance
C1
C2, C3
C4
10 pF
6.8 pF
12 pF
Physical Length
Electrical Length
PCB Material: 10 mil Rogers 4350, Er = 3.48
C5
39 pF
C6
100 pF
5.6 pF
2.2 μF
47 nH
40 nH
4.7 nH
2.4 nH
5.1 Ohm
C7
C8
L1
L2
L3
L4
R1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 182
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
470 MHz Evaluation PCB
9
List of Materials for Evaluation PCB 110961-470 [1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
Item
J1 - J2
J3
Description
PCB Mount SMA Connector
2 mm DC Header
C1
10 pF Capacitor, 0402 Pkg.
6.8 pF Capacitor, 0402 Pkg.
12 pF Capacitor, 0402 Pkg.
39 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
5.6 pF Capacitor, 0402 Pkg.
2.2 μF Capacitor, Tantalum
47 nH Inductor, 0603 Pkg.
40 nH Inductor, 0402 Pkg.
4.7 nH Inductor, 0402 Pkg.
2.4 nH Inductor, 0402 Pkg.
5.1 Ohm Resistor, 0402 Pkg.
C2, C3
C4
C5
C6
C7
C8
L1
L2
L3
L4
R1
HMC453ST89 / HMC453ST89E
Linear Amp
U1
[2]
PCB
110955 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 183
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
900 MHz Application Circuit
This circuit was used to specify the performance for 810-960 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
9
TL1
50 Ohm
0.25”
13°
TL2
50 Ohm
0.08”
4°
TL3
50 Ohm
0.31”
16°
Recommended Component Values
Impedance
C1
C2
C3
C4
C5
C6
C7
L1
5 pF
3.3 pF
2.7 pF
8.2 pF
12 pF
Physical Length
Electrical Length
PCB Material: 10 mil Rogers 4350, Er = 3.48
100 pF
2.2 μF
15 nH
R1
5.1 Ohm
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 184
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
900 MHz Evaluation PCB
9
List of Materials for Evaluation PCB 110387-900 [1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
Item
J1 - J2
J3
Description
PCB Mount SMA Connector
2 mm DC Header
C1
5 pF Capacitor, 0402 Pkg.
3.3 pF Capacitor, 0402 Pkg.
2.7 pF Capacitor, 0402 Pkg.
8.2 pF Capacitor, 0402 Pkg.
12 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
2.2 μF Capacitor, Tantalum
15 nH Inductor, 0603 Pkg.
5.1 Ohm Resistor, 0402 Pkg.
C2
C3
C4
C5
C6
C7
L1
R1
HMC453ST89 / HMC453ST89E
Linear Amp
U1
[2]
PCB
110385 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 185
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
1900 MHz Application Circuit
This circuit was used to specify the performance for 1710-1990 MHz operation. Contact the HMC
Applications Group for assistance in optimizing performance for your application.
9
TL1
50 Ohm
0.04”
4°
TL2
50 Ohm
0.07”
8°
Recommended Component Values
Impedance
C1
C2
C3
C4
C5
C6
L1
1.2 pF
1.5 pF
3.9 pF
15 pF
Physical Length
Electrical Length
PCB Material: 10 mil Rogers 4350, Er = 3.48
100 pF
2.2 μF
20 nH
12 nH
L2
R1
5.1 Ohm
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 186
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
1900 MHz Evaluation PCB
9
List of Materials for Evaluation PCB 108718-1900 [1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
Item
J1 - J2
J3
Description
PCB Mount SMA Connector
2 mm DC Header
C1
1.2 pF Capacitor, 0402 Pkg.
1.5 pF Capacitor, 0402 Pkg.
3.9 pF Capacitor, 0402 Pkg.
15 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
2.2 μF Capacitor, Tantalum
20 nH Inductor, 0402 Pkg.
12 nH Inductor, 0402 Pkg.
5.1 Ohm Resistor, 0402 Pkg.
C2
C3
C4
C5
C6
L1
L2
R1
HMC453ST89 / HMC453ST89E
Linear Amp
U1
[2]
PCB
108716 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 187
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
2100 MHz Application Circuit
This circuit was used to specify the performance for 2010-2170 MHz operation. Contact the HMC Applications Group
for assistance in optimizing performance for your application.
9
Note: C2 and C3 should be placed as close to pins as possible.
Recommended Component Values
TL1
50 Ohm
0.04”
5°
TL2
50 Ohm
0.04”
5°
TL3
50 Ohm
0.04”
5°
C1
C2
C3
C4
C5
C6
C7
L1
0.8 pF
1 pF
Impedance
Physical Length
Electrical Length
3.3 pF
15 pF
PCB Material: 10 mil Rogers 4350, Er = 3.48
100 pF
0.5 pF
2.2 μF
20 nH
12 nH
5.1 Ohm
L2
R1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 188
Application Support: Phone: 1-800-ANALOG-D
HMC453ST89 / 453ST89E
v02.0710
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
2100 MHz Evaluation PCB
9
List of Materials for Evaluation PCB 109942-2100 [1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
Item
J1 - J2
J3
Description
PCB Mount SMA Connector
2 mm DC Header
C1
0.8 pF Capacitor, 0402 Pkg.
1 pF Capacitor, 0402 Pkg.
3.3 pF Capacitor, 0402 Pkg.
15 pF Capacitor, 0402 Pkg.
C2
C3
C4
C5
100 pF Capacitor, 0402 Pkg.
C6
C7
L1
0.5 pF Capacitor, 0402 Pkg.
2.2 μF Capacitor, Tantalum
20 nH Inductor, 0402 Pkg.
12 nH Inductor, 0402 Pkg.
5.1 Ohm Resistor, 0402 Pkg.
L2
R1
HMC453ST89 / HMC453ST89E
Linear Amp
U1
[2]
PCB
109940 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
9 - 189
Application Support: Phone: 1-800-ANALOG-D
相关型号:
©2020 ICPDF网 联系我们和版权申明