HMC480ST89TR [ADI]
InGaP HBT Gain Block Amplifier SMT, DC - 5 GHz;
| 型号： | HMC480ST89TR |
| 厂家： | 
ADI |
| 描述： | InGaP HBT Gain Block Amplifier SMT, DC - 5 GHz 射频 微波 |
| 文件： | 总7页 (文件大小：365K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC480ST89 / 480ST89E
v02.0710
InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Typical Applications
Features
The HMC480ST89 / HMC480ST89E is an ideal RF/IF
gain block & LO or PA driver for:
P1dB Output Power: +19 dBm to 2.5 GHz
8
Gain: 19 dB @ 1 GHz
16 dB @ 2 GHz
• Cellular / PCS / 3G
+34 dBm Output IP3
• Fixed Wireless & WLAN
Single Supply: +6V to +8V
• CATV, Cable Modem & DBS
• Microwave Radio & Test Equipment
Industry Standard SOT89 Package
Included in the HMC-DK001 Designer’s Kits
General Description
Functional Diagram
The HMC480ST89 & HMC480ST89E are InGaP HBT
Gain Block MMIC SMT amplifiers covering DC to
5 GHz and packaged in an industry standard
SOT89. The amplifier can be used as a cascadable
50 Ohm RF/IF gain stage as well as a LO or PA driver
with up to +20 dBm P1dB output power for cellular/3G,
FWA, CATV, microwave radio and test equipment
applications. The HMC480ST89(E) offers 19 dB
of gain with a +34 dBm output IP3 at 1 GHz while
requiring only 82 mA from a single positive supply.
The HMC480ST89(E) InGaP gain blocks offer
excellent output IP3 and flat +19 to +20dBm output
power performance through 5 GHz compared to
equivalent SiGe based products.
Electrical Specifications, Vs= 8.0 V, Rbias= 39 Ohm, TA = +25° C
Parameter
Min.
Typ.
Max.
Units
DC - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.0 GHz
3.0 - 4.0 GHz
4.0 - 5.0 GHz
17
14
12
10
8
19
17
15
13
11
dB
dB
dB
dB
dB
Gain
Gain Variation Over Temperature
Input Return Loss
DC - 5 GHz
0.008
0.016
dB/ °C
DC - 1.0 GHz
1.0 - 5.0 GHz
17
10
dB
dB
DC - 1.0 GHz
1.0 - 5.0 GHz
17
10
dB
dB
Output Return Loss
Reverse Isolation
DC - 5 GHz
20
dB
0.5 - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.5 GHz
3.5 - 5.0 GHz
16
15.5
14.5
13
20
18.5
17.5
16
dBm
dBm
dBm
dBm
Output Power for 1 dB Compression (P1dB)
0.5 - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.5 GHz
3.5 - 5.0 GHz
34
33
32
30
dBm
dBm
dBm
dBm
Output Third Order Intercept (IP3)
(Pout= 0 dBm per tone, 1 MHz spacing)
DC - 4 GHz
4.0 - 5.0 GHz
3.25
4.0
dB
dB
Noise Figure
Supply Current (Icq)
82
mA
Note: Data taken with broadband bias tee on device output.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
8 - 122
Application Support: Phone: 1-800-ANALOG-D
HMC480* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
REFERENCE MATERIALS
Quality Documentation
• Package/Assembly Qualification Test Report: 3 Lead
Plastic SOT89 Package (QTR: 10002 REV: 02)
EVALUATION KITS
• Semiconductor Qualification Test Report: GaAs HBT-B
(QTR: 2013-00229)
• HMC480ST89 Evaluation Board
DOCUMENTATION
Application Notes
DESIGN RESOURCES
• HMC480 Material Declaration
• PCN-PDN Information
• Quality And Reliability
• Symbols and Footprints
• AN-1363: Meeting Biasing Requirements of Externally
Biased RF/Microwave Amplifiers with Active Bias
Controllers
• Broadband Biasing of Amplifiers General Application Note
• MMIC Amplifier Biasing Procedure Application Note
DISCUSSIONS
View all HMC480 EngineerZone Discussions.
• Thermal Management for Surface Mount Components
General Application Note
Data Sheet
• HMC480 Data Sheet
SAMPLE AND BUY
Visit the product page to see pricing options.
TOOLS AND SIMULATIONS
• HMC480 S-Parameter
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
HMC480ST89 / 480ST89E
v02.0710
InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Broadband Gain & Return Loss
Gain vs. Temperature
25
20
15
10
5
22
20
18
16
14
12
10
8
S21
S11
S22
0
-5
-10
-15
-20
-25
-30
8
+25 C
6
4
2
0
+85 C
-40 C
0
1
2
3
4
5
6
7
8
6
6
0
1
2
3
4
5
6
6
5
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss vs. Temperature
Output Return Loss vs. Temperature
0
0
-5
-5
-10
-10
-15
-15
+25 C
+25 C
+85 C
+85 C
-40 C
-40 C
-20
-20
-25
-25
0
1
2
3
4
5
0
1
2
3
4
5
FREQUENCY (GHz)
FREQUENCY (GHz)
Reverse Isolation vs. Temperature
Noise Figure vs. Temperature
0
10
9
-5
8
+25 C
7
6
5
4
3
2
1
0
+85 C
-40 C
+25 C
-10
-15
-20
-25
+85 C
-40 C
0
1
2
3
4
5
0
1
2
3
4
FREQUENCY (GHz)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
8 - 123
Application Support: Phone: 1-800-ANALOG-D
HMC480ST89 / 480ST89E
v02.0710
InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
P1dB vs. Temperature
Psat vs. Temperature
24
22
20
18
16
14
12
10
8
24
22
20
18
16
8
14
+25 C
12
10
8
+85 C
-40 C
+25 C
+85 C
-40 C
6
6
4
4
0
1
2
3
4
5
0
1
2
3
4
5
FREQUENCY (GHz)
FREQUENCY (GHz)
Gain, Power & OIP3 vs. Supply Voltage
Output IP3 vs. Temperature
@ 850 MHz, Rbias= 39 Ohms
36
40
38
36
34
32
30
32
28
24
20
16
28
+25 C
Gain
12
P1dB
Psat
26
24
22
20
+85 C
-40 C
8
OIP3
4
0
7.6
8
8.4
0
1
2
3
4
5
Vs (Vdc)
FREQUENCY (GHz)
Vcc vs. Icc Over Temperature for
Fixed Vs= 8V, RBIAS= 39 Ohms
90
88
86
84
82
80
78
76
74
72
70
+85 C
+25 C
-40 C
4.6
4.7
4.8
4.9
5
Vcc (Vdc)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
8 - 124
Application Support: Phone: 1-800-ANALOG-D
HMC480ST89 / 480ST89E
v02.0710
InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Absolute Maximum Ratings
Collector Bias Voltage (Vcc)
RF Input Power (RFIN)(Vcc = +5 Vdc)
Junction Temperature
+6.0 Vdc
8
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
+11 dBm
150 °C
Continuous Pdiss (T = 85 °C)
(derate 8.25 mW/°C above 85 °C)
0.536 W
Thermal Resistance
(junction to ground paddle)
122 °C/W
Storage Temperature
Operating Temperature
-65 to +150 °C
-40 to +85 °C
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL:
MOLDING COMPOUND MP-180S OR EQUIVALENT.
2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING.
3. LEAD PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS]
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H480
XXXX
HMC480ST89
Low Stress Injection Molded Plastic
Sn/Pb Solder
H480
XXXX
MSL1 [2]
HMC480ST89E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
8 - 125
Application Support: Phone: 1-800-ANALOG-D
HMC480ST89 / 480ST89E
v02.0710
InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
8
This pin is DC coupled.
An off chip DC blocking capacitor is required.
1
RFIN
3
RFOUT
GND
RF output and DC Bias (Vcc) for the output stage.
These pins and package bottom must be connected to RF/
DC ground.
2, 4
Application Circuit
Recommended Bias Resistor Values
for Icc= 82 mA, Rbias= (Vs - Vcc) / Icc
Supply Voltage (Vs)
6V
8V
Note:
1. External blocking capacitors are required on
RFIN and RFOUT.
2. RBIAS provides DC bias stability over temperature.
RBIAS VALUE
12 Ω
1/8 W
39 Ω
1/4 W
RBIAS POWER RATING
Recommended Component Values for Key Application Frequencies
Frequency (MHz)
Component
50
900
1900
18 nH
100 pF
2200
18 nH
100 pF
2400
15 nH
100 pF
3500
8.2 nH
100 pF
5000
6.8 nH
100 pF
L1
270 nH
0.01 μF
56 nH
100 pF
C1, C2
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
8 - 126
Application Support: Phone: 1-800-ANALOG-D
HMC480ST89 / 480ST89E
v02.0710
InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Evaluation PCB
8
List of Materials for Evaluation PCB 108371 [1]
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 Ohm impedance while the
package ground leads and package bottom should
be connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
Item
J1 - J2
J3 - J4
C1, C2
C3
Description
PCB Mount SMA Connector
DC Pin
Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
2.2 μF Capacitor, Tantalum
Resistor, 1210 Pkg.
C4
C5
R1
L1
Inductor, 0603 Pkg.
U1
HMC480ST89 / HMC480ST89E
108370 Evaluation PCB
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedbyAnalog Devices foritsuse,norforanyinfringements of patents orother
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
8 - 127
Application Support: Phone: 1-800-ANALOG-D
相关型号：
©2020 ICPDF网 联系我们和版权申明