HMC533LP4E [ADI]
SMT VCO with Divide-by-16, 23.8 - 24.8 GHz;型号: | HMC533LP4E |
厂家: | ADI |
描述: | SMT VCO with Divide-by-16, 23.8 - 24.8 GHz 振荡器 |
文件: | 总7页 (文件大小:378K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC533LP4 / 533LP4E
v00.0405
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
Typical Applications
Features
Low noise MMIC VCO w/Divide-by-16 for:
Pout: +12 dBm
• VSAT Radio
Phase Noise: -95 dBc/Hz @100 KHz Typ.
No External Resonator Needed
Single Supply: +5V @ 220 mA
24 Lead 4x4mm QFN Package: 9 mmꢀ
• Point to Point/Multipoint Radio
• Test Equipment & Industrial Controls
• Military End-Use
• Automotive Radar
Functional Diagram
General Description
The HMC533LP4 & HMC533LP4E are GaAs InGaP
Heterojunction Bipolar Transistor (HBT) MMIC VCOs.
The HMC533LP4 & HMC533LP4E integrate resona-
tors, negative resistance devices, varactor diodes and
feature a divide-by-16 output. T he VCO’s phase noise
performance is excellent over temperature, shock, and
process due to the oscillator’s monolithic structure.
Power output is +12 dBm typical from a +5V supply
voltage. Prescaler function can be disabled to con-
serve current if not required. The voltage controlled
oscillator is packaged in a leadless QFN 4 x 4 mm
surface mount package.
12
Electrical Specifications, TA = +25° C, Vcc1, Vcc2, Vcc3 = +5V
Parameter
Min.
Typ.
Max.
Units
GHz
Frequency Range
Power Output
23.8 - 24.8
RFOUT
RFOUT/16
+9
-7
+12
-4
+15
-1
dBm
dBm
SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RFOUT
Tune Voltage
-95
220
3
dBc/Hz
V
Vtune
Icc
2
13
260
10
Supply Current
180
mA
μA
Tune Port Leakage Current (Vtune= 13V)
Output Return Loss
dB
Harmonics/Subharmonics
1/2
3/2
26
37
dBc
dBc
Pulling (into a 2.0:1 VSWR)
Pushing @ Vtune= 5V
Frequency Drift Rate
13
80
MHz pp
MHz/V
MHz/°C
2.3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 150
HMC533* PRODUCT PAGE QUICK LINKS
Last Content Update: 11/29/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
DESIGN RESOURCES
• HMC533 Material Declaration
• PCN-PDN Information
EVALUATION KITS
• HMC533LP4 Evaluation Board.
• Quality And Reliability
• Symbols and Footprints
DOCUMENTATION
Data Sheet
DISCUSSIONS
View all HMC533 EngineerZone Discussions.
• HMC533 Data Sheet
SAMPLE AND BUY
REFERENCE MATERIALS
Visit the product page to see pricing options.
Product Selection Guide
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
• RF, Microwave, and Millimeter Wave IC Selection Guide
2017
Quality Documentation
• Package/Assembly Qualification Test Report: LP4, LP4B,
LP4C, LP4K (QTR: 2013-00487 REV: 04)
DOCUMENT FEEDBACK
• Package/Assembly Qualification Test Report: Plastic
Submit feedback for this data sheet.
Encapsulated QFN (QTR: 05006 REV: 02)
• Semiconductor Qualification Test Report: GaAs HBT-A
(QTR: 2013-00228)
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
HMC533LP4 / 533LP4E
v00.0405
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
Frequency vs. Tuning Voltage, T= 25°C
Frequency vs. Tuning Voltage, Vcc= +5V
26
25.5
25
26
25.5
25
24.5
24
24.5
24
Vcc=4.75V
Vcc=5.0V
Vcc=5.25V
23.5
23
23.5
23
+25 C
+85 C
-40 C
22.5
22
22.5
22
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
Output Power
vs. Tuning Voltage, Vcc= +5V
Sensitivity vs. Tuning Voltage, Vcc= +5V
12
15
600
500
12
+25 C
+85 C
-40 C
400
300
200
100
0
9
+25 C
+85 C
-40 C
6
3
0
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 151
HMC533LP4 / 533LP4E
v00.0405
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
SSB Phase Noise vs. Tuning Voltage
SSB Phase Noise @ Vtune= +5V
-60
-65
-70
-75
0
-20
+25 C
+85 C
-40 C
-40
-60
-80
-80
10kHz offset
100kHz offset
-85
-90
-95
-100
-120
-140
-160
-100
-105
-110
1
2
3
4
5
6
7
8
9
10 11 12 13
103
104
105
106
107
TUNING VOLTAGE (VOLTS)
OFFSET FREQUENCY (Hz)
Divide-by-16 Frequency
vs. Tuning Voltage, Vcc= +5V
1.625
Divide-by-16 Output
Power vs. Tuning Voltage, Vcc= +5V
12
0
-2
-4
-6
1.562
1.5
+25 C
+85 C
-40 C
+25 C
+85 C
-40 C
1.437
1.375
-8
-10
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
Absolute Maximum Ratings
Typical Supply Current vs. Vcc
Vcc1, Vcc2
5.5 V
Vcc (V)
Icc (mA)
Vtune
0 to 15V Max.
135 °C
4.75
200
Junction Temperature
5.0
220
Continuous Pdiss (T=85 °C)
(derate 28 mW/C above 85 °C
5.25
240
1.4 W
Note: VCO will operate over full voltage range shown above.
Thermal Resistance
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
36 °C/W
-65 to +150 °C
-40 to +85 °C
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 152
HMC533LP4 / 533LP4E
v00.0405
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
Outline Drawing
NOTES:
11. LEADFRAME MATERIAL: COPPER ALLOY
12
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H533
XXXX
HMC533LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
H533
XXXX
MSL1 [2]
HMC533LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1, 15, 17,
21, 23
Package bottom has an exposed metal paddle that
must also be connected to RF/DC ground.
GND
2
RFOUT/16
Divided-by-16 Output
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 153
HMC533LP4 / 533LP4E
v00.0405
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
Supply voltage for prescaler.
3, 4
VCC2, VCC3
If prescaler is not required, these pins may be
left open to conserve 100 mA of current
5-14, 18,
19, 24
No Connection. These pins may be connected to RF/
DC ground. Performance will not be affected.
N/C
16
RFOUT
RF output (AC coupled).
12
20
22
VCC1
Supply Voltage, +5V
Control Voltage Input. Modulation port bandwidth
dependent on drive source impedance.
VTUNE
Typical Application Circuit
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 154
HMC533LP4 / 533LP4E
v00.0405
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
Evaluation PCB
12
List of Materials for Evaluation PCB 106651 [1]
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and backside ground slug should be
connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
Item
Description
J1 - J2
J3
PCB Mount SMA RF Connector
2.92 mm PCB mount k-connector
2 mm DC Header
J4 - J5
C1 - C2
C3
4.7 μF Tantalum Capacitor
100 pF Capacitor, 0402 Pkg.
1,000 pF Capacitor, 0603 Pkg.
HMC533LP4 / HMC533LP4E VCO
106546 Eval Board
C4 -C5
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 155
相关型号:
HMC533LP4ETR
Voltage Controlled Oscillator, 23800MHz Min, 24800MHz Max, ROHS COMPLIANT, PLASTIC, LEADLESS, QFN-24
HITTITE
HMC533LP4TR
Voltage Controlled Oscillator, 23800MHz Min, 24800MHz Max, PLASTIC, LEADLESS, QFN-24
HITTITE
HMC534LP5ETR
Voltage Controlled Oscillator, 10600MHz Min, 11800MHz Max, ROHS COMPLIANT, PLASTIC, LEADLESS, QFN-32
HITTITE
HMC534LP5TR
Voltage Controlled Oscillator, 10600MHz Min, 11800MHz Max, PLASTIC, LEADLESS, QFN-32
HITTITE
©2020 ICPDF网 联系我们和版权申明