HMC534LP5TR [HITTITE]
Voltage Controlled Oscillator, 10600MHz Min, 11800MHz Max, PLASTIC, LEADLESS, QFN-32;
| 型号： | HMC534LP5TR |
| 厂家： | 
HITTITE MICROWAVE CORPORATION |
| 描述： | Voltage Controlled Oscillator, 10600MHz Min, 11800MHz Max, PLASTIC, LEADLESS, QFN-32 振荡器 压控振荡器 输出元件 |
| 文件： | 总6页 (文件大小：379K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC534LP5 / 534LP5E
v03.0811
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 10.6 - 11.8 GHz
Typical Applications
Features
Low noise MMIC VCO w/Half Frequency, Divide-by-4
Outputs for:
Dual Output: Fo = 10.6 - 11.8 GHz
Fo/2 = 5.3 - 5.9 GHz
• Point to Point/Multipoint Radio
• Test Equipment & Industrial Controls
• SATCOM
Pout: +11 dBm
Phase Noise: -110 dBc/Hz @100 kHz Typ.
No External Resonator Needed
32 Lead 5x5mm SMT Package: 25mm²
• Military End-Use
Functional Diagram
General Description
The HMC534LP5 & HMC534LP5E are GaAs InGaP
Heterojunction Bipolar Transistor (HBT) MMIC VCOs.
The HMC534LP5 & HMC534LP5E integrate resona-
tors, negative resistance devices, varactor diodes
and feature half frequency and divide-by-4 outputs.
The VCO’s phase noise performance is excellent over
temperature, shock, and process due to the oscillator’s
monolithic structure. Power output is +11 dBm typical
from a +5V supply voltage. The prescaler and RF/2
functions can be disabled to conserve current if not
required. The voltage controlled oscillator is packaged
in a leadless QFN 5x5 mm surface mount package,
and requires no external matching components.
8
Electrical Specifications, TA = +25° C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V
Parameter
Min.
Typ.
Max.
Units
Fo
Fo/2
10.6 - 11.8
5.3 - 5.9
GHz
GHz
Frequency Range
Power Output
RFOUT
RFOUT/2
RFOUT/4
+9
+8
-9
+14
+14
-3
dBm
dBm
dBm
SSB Phase Noise @ 100 kHz Offset,
Vtune= +5V @ RFOUT
-110
dBc/Hz
Tune Voltage
Vtune
2
12
380
10
V
Supply Current
Icc(Dig) + Icc(Amp) + Icc(RF)
310
350
2
mA
µA
dB
Tune Port Leakage Current (Vtune= 12V)
Output Return Loss
Harmonics/Subharmonics
1/2
3/2
2nd
3rd
27
23
17
31
dBc
dBc
dBc
dBc
Pulling (into a 2.0:1 VSWR)
Pushing @ Vtune= 5V
Frequency Drift Rate
2
MHz pp
MHz/V
MHz/°C
20
1.3
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
8 - 1
HMC534LP5 / 534LP5E
v03.0811
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 10.6 - 11.8 GHz
Frequency vs. Tuning Voltage, Vcc = +5V
Frequency vs. Tuning Voltage, T= 25°C
12.4
12.4
12
12
11.6
11.2
10.8
11.6
11.2
10.8
10.4
10.4
+25C
+85C
10
9.6
9.2
8.8
-40C
10
4.75V
5.00V
9.6
9.2
8.8
5.25V
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
Output Power
vs. Tuning Voltage, Vcc = +5V
Sensitivity vs. Tuning Voltage, Vcc = +5V
700
16
14
12
10
8
600
8
500
+25C
+85C
-40C
400
300
200
100
0
6
4
2
0
+25C
+85C
-40C
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
SSB Phase Noise vs. Tuning Voltage
SSB Phase Noise @ Vtune = +5V
0
-70
-20
-80
-40
-60
+25C
+85C
-40C
-90
-80
10kHz OFFSET
100kHz OFFSET
-100
-120
-140
-160
-180
-100
-110
-120
103
104
105
106
107
0
1
2
3
4
5
6
7
8
9
10 11 12 13
OFFSET FREQUENCY (Hz)
TUNING VOLTAGE (VOLTS)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
8 - 2
HMC534LP5 / 534LP5E
v03.0811
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 10.6 - 11.8 GHz
RFOUT/2 Frequency
RFOUT/2 Output Power
vs. Tuning Voltage, Vcc = +5V
vs. Tuning Voltage, Vcc = +5V
6.2
16
6
14
12
10
5.8
5.6
5.4
8
+25C
5.2
+25C
+85C
+85C
-40C
6
4
2
0
5
4.8
4.6
4.4
-40C
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
Divide-by-4 Frequency
Divide-by-4 Output Power
vs. Tuning Voltage, Vcc = +5V
vs. Tuning Voltage, Vcc = +5V
3.1
0
-1
-2
3
2.9
2.8
2.7
2.6
8
-3
-4
+25C
+85C
-40C
-5
-6
2.5
+25C
-7
+85C
2.4
2.3
2.2
-40C
-8
-9
-10
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
Absolute Maximum Ratings
Typical Supply Current vs. Vcc
Vcc(Dig), Vcc(Amp), Vcc(RF)
+5.5 Vdc
0 to +15V
135 °C
Vcc (V)
Icc (mA)
Vtune
4.75
320
Junction Temperature
5.00
350
Continuous Pdiss (T=85 °C)
(derate 43.5 mW/C above 85 °C
5.25
380
2.17 W
Note: VCO will operate over full voltage range shown above.
Thermal Resistance
(junction to ground paddle)
23 °C/W
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
-65 to +150 °C
-40 to +85 °C
Class 1A
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
8 - 3
HMC534LP5 / 534LP5E
v03.0811
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 10.6 - 11.8 GHz
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
8
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL3 [1]
Package Marking [3]
H534
XXXX
HMC534LP5
Low Stress Injection Molded Plastic
Sn/Pb Solder
H534
XXXX
MSL3 [2]
HMC534LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1 - 3, 8 - 10, 13 - 18,
20, 22 - 28, 30 - 32
No Connection. These pins may be connected to RF/
DC ground. Performance will not be affected.
N/C
Divide-by-4 output.
DC block required
4
6
RFOUT/4
Supply voltage for prescaler. If prescaler is not
required, this pin may be left open to conserve
approximately 65 mA of current.
Vcc (Dig)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
8 - 4
HMC534LP5 / 534LP5E
v03.0811
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 10.6 - 11.8 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
Supply voltage, for RFOUT/2 output. If RFOUT/2
is not required. This pin may be left open to
conserve approximately 30 mA of current.
7
Vcc (Amp)
12
19
RFOUT/2
RF OUT
Half frequency output (AC coupled).
RF output (AC coupled).
21
Vcc (RF)
Supply Voltage, +5V
8
Control voltage and modulation input. Modulation
bandwidth dependent on drive source impedance. See
“Determining the FM Bandwidth of a Wideband Varac-
tor Tuned VCO” application note.
29
VTUNE
GND
Package bottom has an exposed metal paddle that
must be connected to RF/DC ground.
5, 11, Paddle
Typical Application Circuit
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
8 - 5
HMC534LP5 / 534LP5E
v03.0811
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 10.6 - 11.8 GHz
Evaluation PCB
8
List of Materials for Evaluation PCB 110227 [1]
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 Ohm impedance while the
package ground leads and backside ground paddle
should be connected directly to the ground plane
similar to that shown. A sufficient number of via
holes should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
Item
Description
J1 - J4
J5 - J6
C1 - C3
C4
PCB Mount SMA RF Connector
2 mm DC Header
100 pF Capacitor, 0402 Pkg.
1,000 pF Capacitor, 0402 Pkg.
2.2 µF Tantalum Capacitor
HMC534LP5 / HMC534LP5E VCO
110225 Eval Board
C5 - C7
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
8 - 6
相关型号：
HMC535LP4ETR
Voltage Controlled Oscillator, 14700MHz Min, 15400MHz Max, ROHS COMPLIANT, PLASTIC, LEADLESS, QFN-24
HITTITE
HMC535LP4TR
Voltage Controlled Oscillator, 14700MHz Min, 15400MHz Max, PLASTIC, LEADLESS, QFN-24
HITTITE
©2020 ICPDF网 联系我们和版权申明