HMC602LP4ETR [ADI]
70 dB, Logarithmic Detector/Controller SMT, 1 - 8000 MHz;型号: | HMC602LP4ETR |
厂家: | ADI |
描述: | 70 dB, Logarithmic Detector/Controller SMT, 1 - 8000 MHz 射频 微波 |
文件: | 总9页 (文件大小:563K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC602LP4 / 602LP4E
v03.0209
70 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 1 - 8000 MHz
Typical Applications
Features
The HMC602LP4(E) is ideal for IF and RF applica-
tions in:
Wide Dynamic Range: up to 70 dB
High Accuracy: 1 dB with 60 dB Range Up To 6 GHz
Fast: 10ns Output Response Time
Supply Voltage: +5V
• Cellular/PCS/3G
• WiMAX, WiBro, WLAN, Fixed Wireless & Radar
• Power Monitoring & Control Circuitry
• Receiver Signal Strength Indication (RSSI)
• Automatic Gain & Power Control
Power-Down Mode
Excellent Stability over Temperature
Buffered Temperature Sensor Output
Compact 4x4mm Leadless SMT Package
Functional Diagram
General Description
12
The HMC602LP4(E) Logarithmic Detector/Controller
converts RF signals at its input, to a proportional DC
voltage at its output. The HMC602LP4(E) employs
a successive compression topology which delivers
extremely high dynamic range and conversion accuracy
over a wide input frequency range. As the input power
is increased, successive amplifiers move into saturation
one by one creating an accurate approximation of the
logarithm function. The output of a series of square law
detectors is summed, converted into voltage domain
and buffered to drive the LOGOUT output. For detection
mode, the LOGOUT pin is shorted to the VSET input,
and will provide a nominal logarithmic slope of -25mV/
dB and an intercept of 18 dBm (23 dBm for ƒ > 5.8 GHz).
The HMC602LP4(E) can also be used in the controller
mode where an external voltage is applied to the VSET
pin, to create an AGC or APC feedback loop.
[1]
Electrical Specifications, TA = +25C, EN= 5V, Vcc1, Vcc2, Vcc3= +5V
Parameter
Typ.
Typ.
100
70
Typ.
900
71
Typ.
1900
71
Typ.
2200
71
Typ.
3600
68
Typ.
5800
66
Typ.
7000
61
Typ.
8000
56
Units
MHz
dB
Input Frequency
50
3 dB Dynamic Range
3 dB Dynamic Range Center
1 dB Dynamic Range
69
-24.5
61
-25
61
-25.5
62
-25.5
62
-25.5
63
-24
-23
-20.5
56
-19
dBm
dB
62
63
49
Output Intercept
18.2
-25.6
16
18
18.7
-25.3
14
19.8
-25
20.2
-25
23.1
-24.6
16
24.4
-25.4
15
23
21.6
-30
22
dBm
mV/dB
mdB/°C
Output Slope
-25.5
16
-27.5
14
Temperature Sensitivity @ -10 dBm Input [2]
14
15
[1] Detector mode measurements; LOGOUT (Pin 15) is shorted to VSET (Pin 16).
[2] Measured from T = -40C to T = +85C
A
A
[3] C9 removed from production board
Parameter
LOGOUT Interface
Conditions
Min.
0
Typ.
Max.
Units
Output Voltage Range
Vcc -1.0
V
Output Fall Time
Output Rise Time
VSET Interface
-10 dBm Input Pulsed; Measured from 10% to 90% [3]
-10 dBm Input Pulsed; Measured from 10% to 70% [3]
9.5
10
ns
ns
Input Impedance
Input Voltage Range
Low Frequency Gain
30
kΩ
V
0.25 to 2.0
56
VSET to LOGOUT
dB
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 18
HMC602* PRODUCT PAGE QUICK LINKS
Last Content Update: 11/29/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
DESIGN RESOURCES
• HMC602 Material Declaration
• PCN-PDN Information
EVALUATION KITS
• HMC602LP4 Evaluation Board
• Quality And Reliability
• Symbols and Footprints
DOCUMENTATION
Data Sheet
DISCUSSIONS
View all HMC602 EngineerZone Discussions.
• HMC602 Data Sheet
SAMPLE AND BUY
TOOLS AND SIMULATIONS
Visit the product page to see pricing options.
• HMC602LP4E S-Parameters
TECHNICAL SUPPORT
REFERENCE MATERIALS
Product Selection Guide
Submit a technical question or find your regional support
number.
• RF, Microwave, and Millimeter Wave IC Selection Guide
DOCUMENT FEEDBACK
2017
Quality Documentation
Submit feedback for this data sheet.
• Package/Assembly Qualification Test Report: LP4, LP4B,
LP4C, LP4K (QTR: 2013-00487 REV: 04)
• Package/Assembly Qualification Test Report: Plastic
Encapsulated QFN (QTR: 05006 REV: 02)
• Semiconductor Qualification Test Report: BiCMOS-A (QTR:
2013-00235)
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
HMC602LP4 / 602LP4E
v03.0209
70 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 1 - 8000 MHz
Electrical Specifications, (continued)
Parameter
Conditions
Min.
Typ.
700
Max.
Units
kHz
Open Loop Corner Frequency
Power Down (EN) Interface
Voltage Range for Normal Mode
Voltage Range for Powerdown Mode
Threshold Voltage
0.8 x Vcc [4]
0
Vcc [4]
0.2 x Vcc [4]
V
V
V
Vcc [4]/2
Power Supply (Vcc1, Vcc2, Vcc3)
Operating Voltage Range
4.5
5.5
V
Supply Current in Normal Mode
Supply Current in Power Down Mode
113
1
mA
mA
[4] Vcc= Vcc1= Vcc2= Vcc3= +5V
Test Conditions
12
Parameter
Condition
+5V
Vcc1, Vcc2, Vcc3
Input Zo
TA
50Ω
+25C
Fin
900 MHz
LOGOUT Voltage & Error
LOGOUT Voltage & Error
vs. Input Power, Fin = 50 MHz
vs. Input Power, Fin = 100 MHz
4
2
0
4
2.6
2.6
ERR +25C
ERR +85C
ERR +25C
ERR +85C
ERR -40C
ERR -40C
2
2
2
0
1.4
1.4
-2
-4
-2
0.8
0.2
0.8
0.2
Ideal
Ideal
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
-4
-70
-60
-50
-40
-30
-20
-10
0
10
-70
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
INPUT POWER (dBm)
LOGOUT Voltage & Error
LOGOUT Voltage & Error
vs. Input Power, Fin = 900 MHz
vs. Input Power, Fin = 1900 MHz
4
4
2.6
2.6
ERR +25C
ERR +85C
ERR -40C
ERR +25C
ERR +85C
ERR -40C
2
2
2
2
0
0
1.4
1.4
-2
-4
-2
0.8
0.2
Ideal
0.8
0.2
Ideal
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
-4
-70
-60
-50
-40
-30
-20
-10
0
10
-70
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
INPUT POWER (dBm)
Unless otherwise noted: Vcc1, Vcc2, Vcc3 = +5V, TA = +25C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 19
HMC602LP4 / 602LP4E
v03.0209
70 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 1 - 8000 MHz
LOGOUT Voltage & Error
vs. Input Power, Fin = 2200 MHz
LOGOUT Voltage & Error
vs. Input Power, Fin = 3600 MHz
4
4
2.6
2.6
ERR +25C
ERR +85C
ERR -40C
ERR +25C
ERR +85C
ERR -40C
2
2
2
2
0
0
1.4
1.4
0.8
0.2
-2
-4
-2
-4
0.8
0.2
Ideal
Ideal
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
12
-70
-60
-50
-40
-30
-20
-10
0
10
10
10
-70
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
INPUT POWER (dBm)
LOGOUT Voltage & Error
vs. Input Power, Fin = 5800 MHz
LOGOUT Voltage & Error
vs. Input Power, Fin = 7000 MHz
4
6
2.6
2.6
Ideal
ERR +25C
LOGOUT +25C
LOGOUT +85C
ERR +85C
ERR -40C
LOGOUT -40C
2
3
2
1.4
0.8
0.2
2
0
0
1.4
-2
-4
-3
-6
0.8
Ideal
ERR +25C
ERR +85C
ERR -40C
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
0.2
-70
-60
-50
-40
-30
-20
-10
0
-70
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
INPUT POWER (dBm)
LOGOUT Voltage & Error
vs. Input Power, Fin = 8000 MHz
LOGOUT vs. Frequency Over Input Power
10
5
2.4
2.4
-70dBm
-60dBm
ERR +25C
ERR +85C
ERR -40C
-50dBm
1.8
1.2
0.6
0
1.8
1.2
0.6
0
-40dBm
-30dBm
0
-20dBm
-10dBm
-5
-10
0dBm
Ideal
LOGOUT +25C
LOGOUT +85C
LOGOUT -40C
10dBm
0
1
2
3
4
5
6
7
8
-70
-60
-50
-40
-30
-20
-10
0
FREQUENCY (GHz)
INPUT POWER (dBm)
Unless otherwise noted: Vcc1, Vcc2, Vcc3 = +5V, T = +25C
A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 20
HMC602LP4 / 602LP4E
v03.0209
70 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 1 - 8000 MHz
LOGOUT Slope vs. Frequency
LOGOUT Slope vs. Supply Voltage
-20
-20
0.1GHz
1.9GHz
-22
-22
-24
-26
-28
3.6GHz
5.8GHz
8GHz
-24
-26
-28
-30
+25C
+85C
-40C
-30
-32
-32
4.5
12
0
1
2
3
4
5
6
7
8
5
5.5
FREQUENCY (GHz)
Vcc1, Vcc2, Vcc3 (Volts)
LOGOUT Intercept vs. Frequency
LOGOUT Intercept vs. Supply Voltage
30
26
24
22
20
18
27
24
21
18
+25C
+85C
-40C
0.1GHz
1.9GHz
3.6GHz
5.8GHz
8GHz
16
14
12
15
12
0
1
2
3
4
5
6
7
8
4.5
5
5.5
FREQUENCY (GHz)
Vcc1, Vcc2, Vcc3 (Volts)
LOGOUT Error vs. Input Power,
LOGOUT Voltage
vs. Input Power & Frequency
Normalized [2], Fin= 1900 MHz
2
2.4
2
1
0
1.6
1.2
0.8
0.4
0
50 MHz
100 MHz
900 MHz
1900 MHz
2200 MHz
3600MHz
5800MHz
8000MHz
+85C
-40C
-1
-2
-70
-60
-50
-40
-30
-20
-10
0
10
-70
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
INPUT POWER (dBm)
[1] Unless otherwise noted: Vcc1, Vcc2, Vcc3 = +5V, T = +25C
A
[2] This data is relative to the room temperature performance of the HMC602LP4(E)
[3] Reference plane at J1 connector on Evaluation PCB
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 21
HMC602LP4 / 602LP4E
v03.0209
70 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 1 - 8000 MHz
Input Return Loss vs Frequency [4]
Absolute Maximum Ratings
0
-10
-20
-30
-40
-50
Vcc1, Vcc2, Vcc3
+5.5V
+5.5V
+5.5V
3 mA
EN
VSET Input Voltage
LOGOUT Output Current
RF Input Power
Junction Temperature
+15 dBm
125 °C
Continuous Pdiss (T = 85°C)
(Derate 7.95 mW/°C above 85°C)
1.55 Watts
42 °C/W
Thermal Resistance (Rth)
(junction to lead)
0
1
2
3
4
5
6
7
8
Storage Temperature
Operating Temperature
-65 to +150 °C
-40 to +85 °C
12
FREQUENCY (GHz)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
[4] Reference plane at J1 connector on Evaluation PCB
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
7. REFER TO HMC APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H602
XXXX
HMC602LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
H602
XXXX
MSL1 [2]
HMC602LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 22
HMC602LP4 / 602LP4E
v03.0209
70 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 1 - 8000 MHz
Pin Descriptions
Pin Number
Function
Description
These pins are not connected internally.
Interface Schematic
1, 6, 7, 13,
17, 18
N/C
2
TEMP
Temperature sensor output pin.
12
RF Input pins. Connect RF to INP, and AC couple
INN to ground for single-ended operation.
3, 4
INP, INN
Enable pin, connect to Vcc1, Vcc2, Vcc3 for normal operation.
Applying voltage <0.2 x (Vcc1, Vcc2, Vcc3) will initiate power
saving mode.
5
EN
8 - 12, 19, 20,
23, 24
Vcc1, Vcc2,
Vcc3
Bias supply. Connect supply voltage to
these pins with appropriate filtering.
14
CLPF
Loop filter capacitor for output ripple filtering.
Logarithmic output that converts the input power
to a DC level in detector mode. Short this pin to
VSET for detector mode.
15
16
LOGOUT
VSET input in controller mode. Short this
pin to LOGOUT for detector mode.
VSET
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 23
HMC602LP4 / 602LP4E
v03.0209
70 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 1 - 8000 MHz
Pin Descriptions (Continued)
Pin Number
Function
Description
Interface Schematic
21, 22
N/C
The user should not connect to these pins.
Package Base
GND
Exposed paddle must be connected to RF and DC ground.
Application & Evaluation PCB Schematic
12
Notes
Note 1: The HMC602LP4 & HMC602LP4E evaluation boards are pre-assembled for single-ended input, and detector/RSSI mode.
Note 2: For detector mode, connect high impedance volt meter to the LOGOUT port, and make no connection to VSET. LOGOUT
is shorted to VSET by R9, as required for detector mode.
Note 3: For controller mode, remove R9 and install 0 ohm resistor (R11), then make appropriate connection to LOGOUT and VSET.
In controller mode, the LOGOUT output can be used to drive a variable gain amplifier, or a variable attenuator, either
directly or through a buffer or microcontroller. VSET should be connected to an external supply, typically between +0.6
and +1.9V.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 24
HMC602LP4 / 602LP4E
v03.0209
70 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 1 - 8000 MHz
Evaluation PCB
12
List of Materials for Evaluation PCB 121492 [1]
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
Item
Description
J1 - J3
J4
PC Mount SMA Connector
Molex Connector Header
DC Pin
J5 - J9
C1, C2, C3, C5, C7 100 pF Capacitor, 0402 Pkg.
C4, C6, C8
0.1μF Capacitor, 0402 Pkg.
220 pF Capacitor, 0402 Pkg.
68Ω Resistor, 0402 Pkg.
1k Ω Resistor, 0402 Pkg.
10k Ω Resistor, 0402 Pkg.
0Ω Resistor, 0402 Pkg.
C9
R1
R2
R3
R4 - R6, R9, R12
R13
R14
R15
R16
180Ω Resistor, 0402 Pkg.
27.4Ω Resistor, 0402 Pkg.
15Ω Resistor, 0402 Pkg.
49.9Ω Resistor, 0402 Pkg.
HMC602LP4 / HMC602LP4E
Logarithmic Detector / Controller
U1
[2]
PCB
121490 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
12 - 25
相关型号:
©2020 ICPDF网 联系我们和版权申明