HMC716LP3RTR [ADI]
IC,MICROWAVE/MILLIMETER WAVE AMPLIFIER,SINGLE,GAAS,LLCC,16PIN,PLASTIC;型号: | HMC716LP3RTR |
厂家: | ADI |
描述: | IC,MICROWAVE/MILLIMETER WAVE AMPLIFIER,SINGLE,GAAS,LLCC,16PIN,PLASTIC 放大器 |
文件: | 总10页 (文件大小:354K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC716LP3 / 716LP3E
v00.0808
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 3.1 - 3.9 GHz
5
Features
Typical Applications
The HMC716LP3(E) is ideal for:
• Fixed Wireless and LTE/WiMAX/4G
• BTS & Infrastructure
Noise Figure: 1 dB
Gain: 18 dB
Output IP3: +33 dBm
Single Supply: +3V to +5V
50 Ohm Matched Input/Output
16 Lead 3x3mm QFN Package: 9 mm2
• Repeaters and Femtocells
• Public Safety Radio
• Access Points
Functional Diagram
General Description
The HMC716LP3(E) is a GaAs PHEMT MMIC
Low Noise Amplifier that is ideal for fixed wireless
and LTE/WiMAX/4G basestation front-end receivers
operating between 3.1 and 3.9 GHz. The amplifier
has been optimized to provide 1 dB noise figure,
18 dB gain and +33 dBm output IP3 from a single
supply of +5V. Input and output return losses are
excellent and the LNA requires minimal external
matching and bias decoupling components. The
HMC716LP3(E) can be biased with +3V to +5V and
features an externally adjustable supply current
which allows the designer to tailor the linearity
performance of the LNA for each application.
Electrical Specifications
TA = +25° C, Rbias = 820 Ohms for Vdd = 5V, Rbias = 47k Ohms for Vdd = 3V [1]
Vdd = +3V
Vdd = +5V
Parameter
Units
Min.
13
Typ.
3.1 - 3.9
17
Max.
Min.
15.5
Typ.
3.1 - 3.9
18
Max.
1.3
Frequency Range
Gain
MHz
dB
Gain Variation Over Temperature
Noise Figure
0.01
1
0.01
1
dB/ °C
dB
1.3
Input Return Loss
25
30
dB
Output Return Loss
13
16
dB
Output Power for 1 dB Compression (P1dB)
Saturated Output Power (Psat)
Output Third Order Intercept (IP3)
Supply Current (Idd)
12
15
16
19
dBm
dBm
dBm
mA
16.5
26
20.5
33
41
55
65
90
[1] Rbias resistor sets current, see application circuit herein
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 306
HMC716LP3 / 716LP3E
v00.0808
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 3.1 - 3.9 GHz
5
[1] [2]
[1]
Broadband Gain & Return Loss
Gain vs. Temperature
30
26
20
24
S21
+25C
+85C
-40C
10
22
0
20
18
16
14
12
S22
-10
-20
-30
-40
S11
5V
3V
1
2
3
4
5
6
7
8
3
3.2
3.4
3.6
3.8
4
4
4
FREQUENCY (GHz)
FREQUENCY (GHz)
[2]
[1]
Gain vs. Temperature
Input Return Loss vs. Temperature
26
0
24
22
20
18
16
14
12
+25C
+85C
-40C
+25C
+85C
-40C
-10
-20
-30
-40
3
3.2
3.4
3.6
3.8
4
3
3.2
3.4
3.6
3.8
FREQUENCY (GHz)
FREQUENCY (GHz)
[1]
[1]
Reverse Isolation vs.Temperature
Output Return Loss vs. Temperature
0
-15
+25C
+25C
+85C
-40C
-20
+85C
-5
-10
-15
-20
-25
-40C
-25
-30
-35
-40
-45
3
3.2
3.4
3.6
3.8
4
3
3.2
3.4
3.6
3.8
FREQUENCY (GHz)
FREQUENCY (GHz)
[1] Vdd = 5V, Rbias =820 Ω [2] Vdd = 3V, Rbias = 47k Ω
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 307
HMC716LP3 / 716LP3E
v00.0808
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 3.1 - 3.9 GHz
5
[1] [2] [4]
[1] [2]
Noise Figure vs.Temperature
P1dB vs. Temperature
1.8
24
+85C
+25C
Vdd=5V
1.5
21
1.2
0.9
0.6
18
Vdd=3V
15
-40C
12
9
+25C
+85C
-40C
Vdd=5V
0.3
Vdd=3V
0
3
3.2
3.4
3.6
3.8
4
3
3.2
3.4
3.6
3.8
4
FREQUENCY (GHz)
FREQUENCY (GHz)
[1] [2]
[1] [2]
Psat vs. Temperature
Output IP3 vs.Temperature
24
45
Vdd=5V
+25C
+85C
41
37
21
18
15
-40C
Vdd=5V
33
29
25
Vdd=3V
12
+25C
+85C
-40C
Vdd=3V
9
21
3
3.2
3.4
3.6
3.8
4
3
3.2
3.4
3.6
3.8
4
FREQUENCY (GHz)
FREQUENCY (GHz)
Output IP3 and Supply Current vs.
Output IP3 and Supply Current vs.
Supply Voltage @ 3300 MHz [3]
Supply Voltage @ 3800 MHz [3]
95
80
65
50
35
20
5
95
80
65
50
35
20
5
36
36
34
32
30
34
32
30
Idd
IP3
Idd
IP3
28
26
28
26
24
24
2.7
3.1
3.5
3.9
4.3
4.7
5.1
5.5
2.7
3.1
3.5
3.9
4.3
4.7
5.1
5.5
Voltage Supply (V)
Voltage Supply (V)
[1] Vdd = 5V, Rbias = 820 Ω
[2] Vdd = 3V, Rbias = 47kΩ
[3] Rbias = 820 Ohms for Vdd = 5V, Rbias = 47kΩ for Vdd = 3V
[4] Measurement reference plane shown on evaluation PCB drawing.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 308
HMC716LP3 / 716LP3E
v00.0808
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 3.1 - 3.9 GHz
5
[2]
[1]
Power Compression @ 3300 MHz
Power Compression @ 3300 MHz
35
30
25
20
15
10
40
35
30
25
20
15
10
5
Pout
Gain
PAE
5
Pout
Gain
PAE
0
0
-5
-5
-20 -18 -16 -14 -12 -10 -8
-6
-4
-2
0
2
-20
-15
-10
-5
0
5
INPUT POWER (dBm)
INPUT POWER (dBm)
[1]
[2]
Power Compression @ 3300 MHz
Power Compression @ 3800 MHz
35
30
25
20
15
10
5
32
26
20
14
8
2
Pout
Gain
PAE
0
Pout
Gain
PAE
-4
-5
-10
-10
-20
-16
-12
-8
-4
0
4
8
-20
-15
-10
-5
0
5
INPUT POWER (dBm)
INPUT POWER (dBm)
Gain, Power & Noise Figure
vs. Supply Voltage @ 3300 MHz
Gain, Power & Noise Figure
vs. Supply Voltage @ 3800 MHz
[3]
[3]
1.4
1.3
1.2
1.1
1
1.4
1.3
1.2
1.1
1
24
23
22
20
18
16
14
12
P1dB
Gain
21
19
17
15
13
11
P1dB
Gain
0.9
0.8
0.9
0.8
NF
NF
2.7
3.1
3.5
3.9
4.3
4.7
5.1
5.5
2.7
3.1
3.5
3.9
4.3
4.7
5.1
5.5
Voltage Supply (V)
Voltage Supply (V)
[1] Vdd = 5V, Rbias = 820 Ω [2] Vdd = 3V, Rbias = 47kΩ [3] Rbias = 820 Ohms for Vdd = 5V, Rbias = 47k for Vdd 3V
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 309
HMC716LP3 / 716LP3E
v00.0808
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 3.1 - 3.9 GHz
5
Output IP3 vs. Rbias @ 3300 MHz
Gain, Noise Figure & Rbias @ 3300 MHz
40
36
32
28
24
20
1.3
1.25
1.2
1.15
1.1
1.05
1
22
20
18
16
14
12
10
Vdd=3V
Vdd=5V
Vdd=3V
Vdd=5V
100
1000
10000
Rbias (Ohms)
100000
100
1000
10000
100000
Rbias (Ohms)
Output IP3 vs. Rbias @ 3800 MHz
Gain, Noise Figure & Rbias @ 3800 MHz
40
1.25
20
18
16
14
12
10
8
Vdd=3V
Vdd=5V
1.2
1.15
1.1
1.05
1
Vdd=3V
Vdd=5V
36
32
28
24
20
0.95
100
1000
10000
Rbias (Ohms)
100000
100
1000
10000
100000
Rbias (Ohms)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 310
HMC716LP3 / 716LP3E
v00.0808
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 3.1 - 3.9 GHz
Absolute Bias Resistor
Range & Recommended Bias Resistor Values
5
Rbias (Ohms)
Vdd (V)
Idd (mA)
Min
Max
Recommended
2.2k
5.6k
47k
270
820
2.2k
20
30
41
48
65
81
3V
5V
2k [1]
Open Circuit
0
Open Circuit
[1] With Vdd= 3V and Rbias < 2kΩ may result in the part becoming conditionally stable which is not recommended.
Absolute Maximum Ratings
Drain Bias Voltage (Vdd)
+5.5V
RF Input Power (RFIN)
(Vdd = +5 Vdc)
+10 dBm
150 °C
0.72 W
Channel Temperature
Continuous Pdiss (T= 85 °C)
(derate 11.1 mW/°C above 85 °C)
Thermal Resistance
(channel to ground paddle)
90 °C/W
Storage Temperature
Operating Temperature
-65 to +150 °C
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Typical Supply Current vs. Supply Voltage
(Rbias = 820 Ohms for Vdd = 5V, Rbias = 47kΩ for Vdd = 3V)
Vdd (V)
2.7
Idd (mA)
31
3.0
41
3.3
51
4.5
51
5.0
65
5.5
80
Note: Amplifier will operate over full voltage ranges shown above.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 311
HMC716LP3 / 716LP3E
v00.0808
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 3.1 - 3.9 GHz
5
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE
MUST BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR
SUGGESTED LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
716
XXXX
HMC716LP3
Low Stress Injection Molded Plastic
Sn/Pb Solder
716
XXXX
MSL1 [2]
HMC716LP3E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 312
HMC716LP3 / 716LP3E
v00.0808
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 3.1 - 3.9 GHz
5
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1, 3 - 7, 9, 10,
12 - 14, 16
No connection required. These pins may be connected
to RF/DC ground without affecting performance.
N/C
This pin is DC coupled. An off chip
DC blocking capacitor is required.
2
RFIN
This pin is DC coupled and matched to 50 Ohms.
An off chip DC blocking capacitor is required.
11
8
RFOUT
RES
This pin is used to set the DC current of the amplifier by
selection of external bias resistor. See application circuit.
Power supply voltage. Bypass capacitors are required.
See application circuit.
15
Vdd
GND
Ground paddle must be connected to RF/DC ground.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 313
HMC716LP3 / 716LP3E
v00.0808
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 3.1 - 3.9 GHz
5
Application Circuit
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 314
HMC716LP3 / 716LP3E
v00.0808
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 3.1 - 3.9 GHz
5
Evaluation PCB
List of Material for Evaluation PCB 122540 [1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
Item
Description
PCB Mount SMA Connector
DC Pin
J1, J2
J3, J4
C1
10 nF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
0.47μF Capacitor, 0603 Pkg.
100 pF Capacitor, 0402 Pkg.
820Ω Resistor, 0402 Pkg.
0 Ohm Resistor, 0402 Pkg.
HMC716LP3(E) Amplifier
122490 Evaluation PCB
C2
C3
C4
R1
R2
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 315
相关型号:
©2020 ICPDF网 联系我们和版权申明