OP400HS-REEL [ADI]
Quad Low Offset, Low Power Operational Amplifier; 四通道,低失调,低功耗运算放大器型号: | OP400HS-REEL |
厂家: | ADI |
描述: | Quad Low Offset, Low Power Operational Amplifier |
文件: | 总16页 (文件大小:400K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Quad Low Offset, Low Power
Operational Amplifier
OP400
FUNCTIONAL BLOCK DIAGRAMS
FEATURES
Low input offset voltage: 150 μV maximum
Low offset voltage drift over –55°C to +125°C: 1.2 pV/°C
maximum
Low supply current (per amplifier): 725 μA maximum
High open-loop gain: 5000 V/mV minimum
Input bias current: 3 nA maximum
Low noise voltage density: 11 nV/√Hz at 1 kHz
Stable with large capacitive loads: 10 nF typical
Pin-compatible to LM148, HA4741, RM4156, and LT1014,
with improved performance
OUTA
–IN A
+IN A
V+
1
2
3
4
5
6
7
8
16 OUT D
15 –IN D
14 +IN D
13 V–
OUT A
–IN A
+IN A
V+
1
2
3
4
5
6
7
14 OUT D
13 –IN D
12 +IN D
11 V–
–
+
–
+
–
–
+
–
–
+
OP400
+IN B
–IN B
OUT B
NC
12 +IN C
11 –IN C
10 OUT C
OP400
–
–
+
+
+IN B
–IN B
OUT B
10 +IN C
+
+
9
8
–IN C
9
NC
OUT C
NC = NO CONNECT
Figure 1. 14-Pin Ceramic DIP (Y-Suffix)
and 14-Pin Plastic DIP (P-Suffix)
Figure 2. 16-Pin SOIC (S-Suffix)
Available in die form
GENERAL DESCRIPTION
The OP400 is the first monolithic quad operational amplifier
that features OP77-type performance. Precision performance is
not sacrificed with the OP400 to obtain the space and cost
savings offered by quad amplifiers.
The OP400 features low power consumption, drawing less than
725 μA per amplifier. The total current drawn by this quad
amplifier is less than that of a single OP07, yet the OP400 offers
significant improvements over this industry-standard op amp.
Voltage noise density of the OP400 is a low 11 nV/√Hz at
10 Hz, half that of most competitive devices.
The OP400 features an extremely low input offset voltage of less
than 150 μV with a drift of less than 1.2 μV/°C, guaranteed over
the full military temperature range. Open-loop gain of the
OP400 is more than 5 million into a 10 kΩ load, input bias
current is less than 3 nA, CMR is more than 120 dB, and PSRR
is less than 1.8 μV/V. On-chip Zener zap trimming is used to
achieve the low input offset voltage of the OP400 and eliminates
the need for offset nulling. The OP400 conforms to the industry-
standard quad pinout, which does not have null terminals.
The OP400 is pin-compatible with the LM148, HA4741,
RM4156, and LT1014 operational amplifiers and can be used to
upgrade systems having these devices. The OP400 is an ideal
choice for applications requiring multiple precision operational
amplifiers and where low power consumption is critical.
V+
BIAS
VOLTAGE
LIMITING
NETWORK
OUT
+IN
–IN
V–
Figure 3. Simplified Schematic (One of Four Amplifiers Is Shown)
Rev. E
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights ofthird parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2007 Analog Devices, Inc. All rights reserved.
OP400
TABLE OF CONTENTS
Features .............................................................................................. 1
Typical Performance Characteristics ..............................................6
Applications..................................................................................... 11
Dual Low Power Instrumentation Amplifier ......................... 11
Bipolar Current Transmitter..................................................... 12
Differential Output Instrumentation Amplifier .................... 12
Multiple Output Tracking Voltage Reference......................... 13
Outline Dimensions....................................................................... 14
Ordering Guide .......................................................................... 15
SMD Parts and Equivalents ...................................................... 15
Functional Block Diagrams............................................................. 1
General Description......................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Electrical Characteristics............................................................. 3
Absolute Maximum Ratings............................................................ 5
Thermal Resistance ...................................................................... 5
ESD Caution.................................................................................. 5
REVISION HISTORY
1/07—Rev. D to Rev. E
Updated Format..................................................................Universal
Changes to Figure 1 and Figure 2................................................... 1
Removed Figure 4............................................................................. 4
Changes to Table 3............................................................................ 4
Changes to Figure 16 through Figure 19, Figure 21..................... 8
Changes to Figure 27........................................................................ 9
Changes to Figure 28...................................................................... 10
Changes to Figure 33...................................................................... 13
Updated Outline Dimensions....................................................... 14
6/03—Rev. B to Rev. C
Edits to Specifications.......................................................................2
10/02—Rev. A to Rev. B
Addition of Absolute Maximum Ratings .......................................5
Edits to Outline Dimensions......................................................... 12
4/02—Rev. 0 to Rev. A
Edits to Features.................................................................................1
Edits to Ordering Information ........................................................1
Edits to Pin Connections..................................................................1
Edits to General Descriptions..................................................... 1, 2
Edits to Package Type .......................................................................2
3/06—Rev. C to Rev. D
Updated Format..................................................................Universal
Deleted Wafer Test Limits Table..................................................... 4
New Package Drawing: R-14......................................................... 15
Updated Outline Dimensions....................................................... 15
Changes to Ordering Guide .......................................................... 16
Rev. E | Page 2 of 16
OP400
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
@ VS = 15 V, TA = +25°C, unless otherwise noted.
Table 1.
OP400A/E
Min Typ
OP400F
Typ
OP400G/H
Typ Max Unit
Parameter
Symbol Conditions
Max Min
Max Min
INPUT CHARACTERISTICS
Input Offset Voltage
VOS
40
150
60
230
80
300
μV
Long-Term Input
Voltage Stability
0.1
0.1
0.1
μV/mo
Input Offset Current
Input Bias Current
Input Noise Voltage
Input Resistance
Differential Mode
IOS
IB
en p-p
RIN
VCM = 0 V
VCM = 0 V
0.1 Hz to 10 Hz
0.1
0.75
0.5
10
1.0
3.0
0.1
0.75
0.5
10
2.0
6.0
0.1
0.75
0.5
10
3.5
7.0
nA
nA
μV p-p
MΩ
Input Resistance
Common Mode
Large Signal Voltage
Gain
RINCM
AVO
200
200
200
GΩ
VO = 10 V
RL = 10 kΩ
RL = 2 kΩ
5000 12,000
2000 3500
3000
1500
12
7000
3000
13
3000
1500
12
7000
3000
13
V/mV
V/mV
V
Input Voltage Range1
IVR
12
13
Common-Mode
Rejection
CMR
V
CM = 12 V
120
140
115
140
110
135
dB
Input Capacitance
CIN
VO
3.2
3.2
3.2
pF
V
OUTPUT
CHARACTERISTICS
Output Voltage Swing
POWER SUPPLY
RL = 10 kΩ
12
12.6
12
12.6
12
12.6
Power Supply Rejection PSRR
Ratio
VS = 3V to 18V
No load
0.1
1.8
0.1
3.2
0.2
5.6
μV/V
μA
Supply Current per
Amplifier
ISY
600
725
600
725
600
725
DYNAMIC PERFORMANCE
Slew Rate
Gain Bandwidth
Product
SR
GBWP
0.1
0.15
500
0.1
0.15
500
0.1
0.15
500
V/μs
kHz
AV = 1
Channel Separation
CS
VO = 20 V p-p,
fO = 10 Hz2
AV = 1,
123
135
10
123
135
10
123
135
10
dB
nF
Capacitive Load
Stability
no oscillations
NOISE PERFORMANCE
Input Noise Voltage
Density3
Input Noise Current
Input Noise Current
Density
en
fO = 10 Hz3
22
36
18
22
11
15
0.6
36
18
22
11
15
0.6
nV/√Hz
nV/√Hz
pA p-p
pA/√Hz
fO = 1000 Hz3
0.1 Hz to 10 Hz
fO = 10 Hz
11
15
0.6
in p-p
in
1 Guaranteed by CMR test.
2 Guaranteed but not 100% tested.
3 Sample tested.
Rev. E | Page 3 of 16
OP400
@ VS = 15 V, −55°C ≤ TA ≤ +125°C for OP400A, unless otherwise noted.
Table 2.
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
INPUT CHARACTERISTICS
Input Offset Voltage
Average Input Offset Voltage Drift
Input Offset Current
Input Bias Current
VOS
TCVOS
IOS
70
0.3
0.1
1.3
270
1.2
2.5
5.0
μV
μV/°C
nA
VCM = 0 V
VCM = 0 V
IB
nA
Large Signal Voltage Gain
AVO
VO = 10 V, RL = 10 kΩ
RL = 2 kΩ
3000
1000
12
9000
2300
12.5
115
V/mV
Input Voltage Range1
Common-Mode Rejection
OUTPUT CHARACTERISTICS
Output Voltage Swing
IVR
CMR
V
dB
VCM = 12 V
RL = 10 kΩ
130
VO
12
12.4
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current per Amplifier
DYNAMIC PERFORMANCE
Capacitive Load Stability
PSRR
ISY
VO = 3 V to 18 V
No load
0.2
600
3.2
775
μV/V
μA
AV = 1, no oscillations
8
nF
1 Guaranteed by CMR test.
@ VS = 15 V, −25°C ≤ TA ≤ +85°C for OP400E/F, 0°C ≤ TA ≤ 70°C for OP400G, −40°C ≤ TA ≤ +85°C for OP400H, unless otherwise noted.
Table 3.
OP400E
Typ
OP400F
Typ
OP400G/H
Typ Max Unit
Parameter
Symbol Conditions
Min
Max Min
Max Min
INPUT CHARACTERISTICS
Input Offset Voltage
Average Input Offset
Voltage Drift
VOS
TCVOS
60
0.3
220
1.2
80
0.3
350
2.0
110
0.6
400
2.5
μV
μV/°C
Input Offset Current
IOS
VCM = 0 V
E, F, G grades
H grade
0.1
0.9
2.5
5.0
0.1
0.9
3.5
0.2
0.2
6.0
12.0 nA
nA
Input Bias Current
IB
VCM = 0 V
E, F, G grades
H grade
10.0
1.0
1.0
12.0 nA
20.0 nA
Large-Signal Voltage Gain
AVO
VCM = 0 V
RL = 10 kΩ
RL = 2 kΩ
3000 10,000
1500 2700
2000 5000
1000 2000
2000 5000
1000 2000
V/mV
V/mV
V
Input Voltage Range1
Common-Mode Rejection
OUTPUT CHARACTERISTICS
Output Voltage Swing
IVR
CMR
12
115
12.5
135
12
110
12.5
135
12
105
12.5
130
VCM = 12 V
dB
VO
RL = 10 kΩ
RL = 2 kΩ
12
11
12.4
12
12
11
12.4
12
12
11
12.6
12.2
V
V
POWER SUPPLY
Power Supply Rejection
Ratio
Supply Current per
Amplifier
PSRR
ISY
VS = 3 V to
18 V
No load
0.15
3.2
0.15
5.6
0.3
10.0 μV/V
600
775
600
775
600
775
μA
DYNAMIC PERFORMANCE
Capacitive Load Stability
No oscillations
10
10
10
nF
1 Guaranteed by CMR test.
Rev. E | Page 4 of 16
OP400
ABSOLUTE MAXIMUM RATINGS
Table 4.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Parameter
Rating
Supply Voltage
Differential Input Voltage
Input Voltage
Output Short-Circuit Duration
Storage Temperature Range
P, Y Packages
Lead Temperature (Soldering 60 sec)
Junction Temperature (TJ) Range
Operating Temperature Range
OP400A
20 V
30 V
Supply voltage
Continuous
Absolute maximum ratings apply to both dice and packaged
parts, unless otherwise noted.
−65°C to +150°C
300°C
−65°C to +150°C
THERMAL RESISTANCE
θJA is specified for worst-case mounting conditions, that is, θJA is
specified for device in socket for CERDIP and PDIP packages;
−55°C to +125°C
−25°C to +85°C
0°C to 70°C
OP400E, OP400F
OP400G
OP400H
θJA is specified for device soldered to printed circuit board for
SOIC package.
−40°C to +85°C
Table 5. Thermal Resistance
Package Type
θJA
94
76
88
θJC
10
33
23
Unit
°C/W
°C/W
°C/W
14-Pin Ceramic DIP (Y)
14-Pin Plastic DIP (P)
16-Pin SOIC (S)
ESD CAUTION
Rev. E | Page 5 of 16
OP400
TYPICAL PERFORMANCE CHARACTERISTICS
3
V
= ±15V
S
T
= 25°C
A
120
110
100
90
V
= ±15V
S
2
1
0
80
–75
–50
–25
0
25
50
75
100
125
0
1
2
3
4
5
TEMPERATURE (°C)
TIME (Minutes)
Figure 7. Input Offset Current vs. Temperature
Figure 4. Warmup Drift
1.1
1.0
0.9
0.8
0.7
0.6
70
60
50
40
30
20
10
V
= ±15V
S
–15
–10
–5
0
5
10
15
–75
–50
–25
0
25
50
75
100
125
COMMON-MODE VOLTAGE (V)
TEMPERATURE (°C)
Figure 8. Input Bias Current vs. Common-Mode Voltage
Figure 5. Input Offset Voltage vs. Temperature
140
2.0
T
V
= 25°C
= ±15V
A
V
= ±15V
S
S
120
100
80
60
40
20
0
1.6
1.2
0.8
0.4
0
1
10
100
1k
10k
100k
–75
–50
–25
0
25
50
75
100
125
FREQUENCY (Hz)
TEMPERATURE (°C)
Figure 9. Common-Mode Rejection vs. Frequency
Figure 6. Input Bias Current vs. Temperature
Rev. E | Page 6 of 16
OP400
2.5
2.4
2.3
2.2
2.1
100
FOUR AMPLIFIERS
= 25°C
T
A
10
±2
±4
±6
±8
±10
±12
±14
±16
±18
±20
1
10
100
FREQUENCY (Hz)
1k
SUPPLY VOLTAGE (V)
Figure 13. Total Supply Current vs. Supply Voltage
Figure 10. Noise Voltage Density vs. Frequency
2.5
2.4
2.3
2.2
2.1
1k
800
600
400
200
0
FOUR AMPLIFIERS
T
V
= 25°C
= ±15V
A
V
= ±15V
S
S
–75
–50
–25
0
25
50
75
100
125
150
1
10
100
FREQUENCY (Hz)
1k
TEMPERATURE (°C)
Figure 14. Total Supply Current vs. Temperature
Figure 11. Current Noise Density vs. Frequency
140
120
100
80
NEGATIVE
SUPPLY
POSITIVE
SUPPLY
60
40
20
0
0
2
4
6
8
10
0.1
1
10
100
FREQUENCY (Hz)
1k
10k
100k
TIME (Seconds)
Figure 12. 0.1 Hz to 10 Hz Noise
Figure 15. Power Supply Rejection vs. Frequency
Rev. E | Page 7 of 16
OP400
144
T
V
= 25°C
= ±15V
A
V
= ±15V
S
S
80
60
142
A
= 1000
V
140
A
A
= 100
= 10
V
V
40
138
136
134
20
0
A
= 1000
V
1
10
100
1k
10k
100k
1M
–75
–50
–25
0
25
50
75
100
125
150
FREQUENCY (Hz)
TEMPERATURE (°C)
Figure 19. Closed-Loop Gain vs. Frequency
Figure 16. Power Supply Rejection vs. Temperature
5k
4k
T
V
= 25°C
= ±15V
A
V
=
±15V
S
S
25
20
R
= 2kΩ
L
3k
15
2k
1k
0
10
5
10
100
1k
10k
100k
–75
–50
–25
0
25
50
75
100
125
150
FREQUENCY (Hz)
TEMPERATURE (°C)
Figure 17. Open-Loop Gain vs. Temperature
Figure 20. Maximum Output Swing Frequency
T
V
= 25°C
= ±15V
A
T
= 25°C
= ±15V
A
120
100
80
S
V
V
S
10
= 10V p-p
OUT
R
= 2kΩ
L
A
= 100
V
1
0
A
A
= 10
= 1
V
GAIN
V
45
90
135
180
60
0.1
PHASE
40
20
0
0.01
0.001
10
100
1k
10k
100k
1M
100
1k
10k
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 18. Open-Loop Gain and Phase Shift vs. Frequency
Figure 21. Total Harmonic Distortion vs. Frequency
Rev. E | Page 8 of 16
OP400
50
45
40
35
T
= 25°C
= ±15V
= +1
T
= 25°C
= ±15V
= +1
A
A
V
V
S
S
A
A
V
V
FALLING
RISING
30
25
20
15
10
5
5V
100μs
0
0
0.5
1.0
1.5
2.0
2.5
3.0
CAPACITIVE LOAD (nF)
Figure 22. Overshoot vs. Capacitive Load
Figure 25. Large Signal Transient Response
T
= 25°C
A
T
= 25°C
A
34
32
V
= ±15V
S
V
= ±15V
= +1
S
A
V
SINKING
30
28
SOURCING
20mV
5μs
0
1
2
3
4
5
TIME (Minutes)
Figure 23. Short Circuit vs. Time
Figure 26. Small Signal Transient Response
140
T
= 25°C
T = 25°C
A
A
V
V
= ±15V
S
V
= ±15V
= +1
S
= 20V p-p
IN
130
120
110
A
V
100
90
20mV
5μs
10
100
1k
10k
100k
FREQUENCY (Hz)
Figure 27. Small Signal Transient Response, CLOAD = 1 nF
Figure 24. Channel Separation vs. Frequency
Rev. E | Page 9 of 16
OP400
100Ω
10kΩ
–
1/4
eOUT
–
OP400
+
1/4
–
TO SPECTRUM ANALYZER
OP400
1/4
–
+
OP400
+
1/4
OP400
+
nV
~
nV
e
(
)
2 × e
(
) × 101
Hz
=
OUT
n
Hz
Figure 28. Noise Test Schematic
–18V
14
13
12
11
V–
10
9
8
–
+
+
–
–
4
3
+
+
1
2
–
V+
1
2
3
4
5
6
7
GND
+18V
Figure 29. Burn-In Circuit
Rev. E | Page 10 of 16
OP400
APPLICATIONS
The OP400 is inherently stable at all gains and is capable of
driving large capacitive loads without oscillating. Nonetheless,
good supply decoupling is highly recommended. Proper supply
decoupling reduces problems caused by supply line noise and
improves the capacitive load-driving capability of the OP400.
Table 6. Gain Bandwidth
Gain
5
10
100
1000
Bandwidth
150 kHz
67 kHz
7.5 kHz
500 Hz
Total supply current can be reduced by connecting the inputs of
an unused amplifier to V−. This turns the amplifier off,
lowering the total supply current.
+
+
V
OUT
1/4
V
IN
DUAL LOW POWER INSTRUMENTATION
AMPLIFIER
OP400A
–
+
–
1/4
OP400A
A dual instrumentation amplifier that consumes less than
33 mW of power per channel is shown in Figure 30. The linear-
ity of the instrumentation amplifier exceeds 16 bits in gains of 5 to
200 and is better than 14 bits in gains from 200 to 1000. CMRR
is above 115 dB (G = 1000). Offset voltage drift is typically
0.4 ꢀV/°C over the military temperature range, which is
comparable to the best monolithic instrumentation amplifiers.
The bandwidth of the low power instrumentation amplifier is
a function of gain and is shown in Table 6.
–
REFERENCE
5kΩ
5kΩ
20kΩ
20kΩ
V
R
G
OUT
40,000
R
G
= 5 +
V
IN
+
+
V
OUT
1/4
OP400A
V
IN
–
+
The output signal is specified with respect to the reference
input, which is normally connected to analog ground. The
reference input can be used to offset the output from −10 V to
+10 V if required.
–
1/4
OP400A
–
REFERENCE
5kΩ
5kΩ
20kΩ
20kΩ
R
G
Figure 30. Dual Low Power Instrumentation Amplifier
Rev. E | Page 11 of 16
OP400
DIFFERENTIAL OUTPUT INSTRUMENTATION
AMPLIFIER
BIPOLAR CURRENT TRANSMITTER
In the circuit of Figure 31, which is an extension of the standard
three op amp instrumentation amplifier, the output current is
proportional to the differential input voltage. Maximum output
current is 5 mA, with voltage compliance equal to 10 V when
using 15 V supplies. Output impedance of the current
transmitter exceeds 3 Mꢁ, and linearity is better than 16 bits
with gain set for a full-scale input of 100 μV.
The output voltage swing of a single-ended instrumentation
amplifier is limited by the supplies, normally at 15 V, to
a maximum of 24 V p-p. The differential output instrumenta-
tion amplifier shown in Figure 32 can provide an output voltage
swing of 48 V p-p when operated with 15 V supplies. The
extended output swing is due to the opposite polarity of the
outputs. Both outputs swing 24 V p-p, but with opposite
polarity, for a total output voltage swing of 48 V p-p. The reference
input can be used to set a common-mode output voltage over the
range 10 V. The PSRR of the amplifier is less than 1 μV/V with
CMRR (G = 1000) better than 115 dB. Offset voltage drift is
typically 0.4 μV/°C over the military temperature range.
–
+
25kΩ
25kΩ
1/4
OP400E
–
V
–
OUT
1/4
200Ω
IOUT
5mA
OP400E
25kΩ
25kΩ
+
V
R
IN
G
–
+
1/4
1/4
25kΩ
25kΩ
OP400E
OP400E
–
+
+
V
IN
200Ω
50,000
–
R
G
–
1
IOUT
Figure 31. Bipolar Current Transmitter
22pF
+
–
1/4
25kΩ
25kΩ
OP400A
–
+
25kΩ
1/4
OP400A
V
R
G
IN
–
25kΩ
22pF
–
1/4
25kΩ
25kΩ
OP400A
22pF
+
+
25kΩ
22pF
V
50kꢀ + R
IN
G
=
V
R
G
OUT
25kΩ
V
OUT
–
1/4
OP400A
REFERENCE
INPUT
+
Figure 32. Differential Output Instrumentation Amplifier
Rev. E | Page 12 of 16
OP400
under 25 μV/mA. Line regulation is better than 15 μV/V,
MULTIPLE OUTPUT TRACKING VOLTAGE
REFERENCE
and output voltage drift is under 20 μV/°C. Output voltage
noise from 0.1 Hz to 10 Hz is typically 75 μV p-p from the
10 V output and proportionately less from the 7.5 V, 5 V, and
2.5 V outputs.
Figure 33 shows a circuit that provides outputs of 10 V, 7.5 V, 5 V,
and 2.5 V for use as a system voltage reference. Maximum
output current from each reference is 5 mA with load regulation
10V
15V
10kΩ
22kΩ
1N4002
+
1/4
7.5V
OP400A
–
1μF
10kΩ
2
10kΩ
10kΩ
REF 43
2.5V
REFERENCE
6
+
1/4
OP400A
+
1/4
OP400A
4
5V
–
10kΩ
2μF
–
10kΩ
10kΩ
+
1/4
2.5V
OP400A
–
1μF
Figure 33. Multiple Output Tracking Voltage Reference
Rev. E | Page 13 of 16
OP400
OUTLINE DIMENSIONS
10.50 (0.4134)
10.10 (0.3976)
0.098 (2.49) MAX
0.005 (0.13) MIN
14
8
0.310 (7.87)
0.220 (5.59)
16
1
9
8
7.60 (0.2992)
7.40 (0.2913)
1
7
10.65 (0.4193)
10.00 (0.3937)
PIN 1
0.100 (2.54) BSC
0.785 (19.94) MAX
0.320 (8.13)
0.290 (7.37)
0.50 (0.0197)
0.25 (0.0
098)
0.060 (1.52)
0.015 (0.38)
1.27 (0.0500)
BSC
45°
2.65 (0.1043)
2.35 (0.0925)
0.200 (5.08)
MAX
0.30 (0.0118)
0.10 (0.0039)
8°
0°
0.150
(3.81)
MIN
0.200 (5.08)
0.125 (3.18)
COPLANARITY
0.10
SEATING
PLANE
0.51 (0.0201)
0.31 (0.0122)
1.27 (0.0500)
0.40 (0.0157)
0.33 (0.0130)
0.20 (0.0079)
0.015 (0.38)
0.008 (0.20)
SEATING
PLANE
15°
0°
0.070 (1.78)
0.030 (0.76)
0.023 (0.58)
0.014 (0.36)
COMPLIANT TO JEDEC STANDARDS MS-013-AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 36. 16-Lead Standard Small Outline Package [SOIC_W]
Wide Body (R-16)
Figure 34. 14-Lead Ceramic Dual In-Line Package [CERDIP]
(Q-14)
[Y-Suffix]
[S-Suffix]
Dimensions shown in millimeters and (inches)
Dimensions shown in inches and (millimeters)
0.775 (19.69)
0.750 (19.05)
0.735 (18.67)
14
1
8
7
0.280 (7.11)
0.250 (6.35)
0.240 (6.10)
0.325 (8.26)
0.310 (7.87)
0.300 (7.62)
0.100 (2.54)
BSC
0.060 (1.52)
MAX
0.195 (4.95)
0.130 (3.30)
0.115 (2.92)
0.210 (5.33)
MAX
0.015
(0.38)
MIN
0.150 (3.81)
0.130 (3.30)
0.110 (2.79)
0.015 (0.38)
GAUGE
PLANE
0.014 (0.36)
0.010 (0.25)
0.008 (0.20)
SEATING
PLANE
0.022 (0.56)
0.018 (0.46)
0.014 (0.36)
0.430 (10.92)
MAX
0.005 (0.13)
MIN
0.070 (1.78)
0.050 (1.27)
0.045 (1.14)
COMPLIANT TO JEDEC STANDARDS MS-001
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
CORNER LEADS MAY BE CONFIGURED AS WHOLE OR HALF LEADS.
Figure 35. 14-Lead Plastic Dual In-Line Package [PDIP]
(N-14)
[P-Suffix]
Dimensions shown in inches and (millimeters)
Rev. E | Page 14 of 16
OP400
ORDERING GUIDE
Model
OP400AY
OP400EY
OP400FY
OP400GP
OP400GPZ1
OP400HP
OP400HPZ1
OP400GS
OP400GS-REEL
OP400GSZ1
OP400GSZ-REEL1
OP400HS
OP400HS-REEL
OP400HSZ1
OP400HSZ-REEL1
OP400GBC
Temperature Range
−55°C to +125°C
−25°C to +85°C
−25°C to +85°C
0°C to +70°C
Package Description
14-Lead CERDIP
14-Lead CERDIP
14-Lead CERDIP
14-Lead PDIP
14-Lead PDIP
14-Lead PDIP
14-Lead PDIP
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
16-Lead SOIC_W
Die
Package Option
Y-Suffix (Q-14)
Y-Suffix (Q-14)
Y-Suffix (Q-14)
P-Suffix (N-14)
P-Suffix (N-14)
P-Suffix (N-14)
P-Suffix (N-14)
S-Suffix (RW-16)
S-Suffix (RW-16)
S-Suffix (RW-16)
S-Suffix (RW-16)
S-Suffix (RW-16)
S-Suffix (RW-16)
S-Suffix (RW-16)
S-Suffix (RW-16)
0°C to +70°C
−40°C to +85°C
−40°C to +85°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
1 Z = Pb-free part.
SMD PARTS AND EQUIVALENTS
SMD Part Number1
5962-8777101M3A
5962-8777101MCA
Analog Devices Equivalent
OP400ATCMDA
OP400AYMDA
1 For military processed devices, please refer to the standard microcircuit drawing (SMD) available at the Defense Supply Center Columbus website.
Rev. E | Page 15 of 16
OP400
NOTES
©2007 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
C00304-0-1/07(E)
Rev. E | Page 16 of 16
相关型号:
©2020 ICPDF网 联系我们和版权申明