5082-7650-F0000 [AGILENT]
7.6 mm (0.3 inch)/10.9 mm (0.43 inch) Seven Segment Displays; 7.6毫米（ 0.3英寸） /10.9毫米（ 0.43英寸）七段显示
| 型号： | 5082-7650-F0000 |
| 厂家： | 
AGILENT TECHNOLOGIES, LTD. |
| 描述： | 7.6 mm (0.3 inch)/10.9 mm (0.43 inch) Seven Segment Displays |
| 文件： | 总11页 (文件大小：193K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
7.6 mm (0.3 inch)/10.9 mm
(0.43 inch) Seven Segment
Displays
5082-761x Series
5082-762x Series
5082-765x Series
5082-766x Series
HDSP-360x Series
HDSP-460x Series
HDSP-E15x Series
Technical Data
Features
• Industry Standard Size
Left or Right Hand Decimal Point
± 1. Overflow Character
• Industry Standard Pinout
7.62 mm (0.300 inch) DIP Leads
on 2.54 mm (0.100 inch) Centers
• Choice of Colors
AlGaAs Red, High Efficiency Red,
Yellow, Green
• Excellent Appearance
Evenly Lighted Segments
± 50° Viewing Angle
Optimum Contrast Given by
Gray Top Surface for AlGaAs Red
and Green Devices
Red Top Surface for HER Devices
Yellow Top Surface for Yellow
Devices
• Categorized for Luminous
Intensity
Yellow and Green Categorized for
Color
Use of Like Categories Yields a
Uniform Display
• High Light Output
• High Peak Current
• Excellent for Long Digit String
Multiplexing
• Intensity and Color Selection
Available
See Intensity and Color Selected
Displays Data Sheet
Description
The 7.6 mm (0.3 inch) and 10.9
mm (0.43 inch) LED seven
segment displays are designed for
viewing distances up to 3 metres
(10 feet) and 5 metres (16 feet).
These devices use an industry
standard size package and
pinouts. All devices are available
as either common anode or
common cathode.
• Design Flexibility
Common Anode or
Common Cathode
Single Digits
• Sunlight Viewable AlGaAs
Devices
AlGaAs[1]
HER[1]
5082-
Yellow
5082-
Green
HDSP-
Package
Red HDSP-
Description
7.6 mm Common Anode Left Hand Decimal
Drawing
7610
7611
7613
7616
7650
7651
7653
7656
7620
7621
7623
7626
7660
7661
7663
7666
3600
3601
3603
3606
4600
4601
4603
4606
A
7.6 mm Common Anode Right Hand Decimal
7.6 mm Common Cathode Right Hand Decimal
7.6 mm Universal ± 1. Overflow Right Hand Decimal[2]
10.9 mm Common Anode Left Hand Decimal
10.9 mm Common Anode Right Hand Decimal
10.9 mm Common Cathode Right Hand Decimal
10.9 mm Universal ± 1. Overflow Right Hand Decimal[2]
B
C
D
E
F
E150
E151
E153
E156
G
H
Notes:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-E10X AlGaAs and HDSP-335X HER data
sheet for low current operation.
2. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram D.
3. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram H.
2
Part Numbering System
5082 -X X X X-X X X X X
HDSP-X X X X-X X X X X
Mechanical Options[1]
00: No Mechanical Option
Color Bin Options[1,2]
0: No Color Bin Limitation
4: Color Bin 4 Only (applicable for Green devices only)
B: Color Bins 2 and 3 (applicable for Yellow devices only)
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color[1]
0: Common Anode
1: Common Anode
3: Common Cathode
Device Specific Configuration[1]
Refer to Respective Datasheet
Package[1]
E: 10.9 mm (0.43 inch) Single Digit Seven Segment Display
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest
Agilent representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1
bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.
3
These displays are ideal for most
applications. Pin for pin equiva-
lent displays are also available in
a low current or high light
displays are ideal for portable
applications. The high light
ambient displays are ideal for
high light ambients or long string
lengths. For additional informa-
tion see the Low Current Seven
Segment Displays, or High Light
Ambient Seven Segment Displays
data sheets.
ambient design. The low current
Package Dimensions
NOTES;
1. DIMENSIONS IN
MILLIMETRES AND
(INCHES).
2. ALL UNTOLERANCED
DIMENSIONS ARE
FOR REFERENCE
ONLY.
3. REDUNDANT
ANODES.
4. UNUSED DP
POSITION.
5. SEE INTERNAL
CIRCUIT DIAGRAM.
6. REDUNDANT
CATHODE.
7. SEE PART NUMBER
TABLE FOR L.H.D.P.
AND R.H.D.P.
DESIGNATION.
8. FOR YELLOW AND
GREEN DEVICES
ONLY.
4
Internal Circuit Diagram
Absolute Maximum Ratings
AlGaAs Red
HDSP-E150
Series
HER
5082-7610/
7650 Series
Yellow
5082-7620/
7660 Series
Green
HDSP-3600/
4600 Series
Description
Units
mW
Average Power per Segment or DP
96
105
80
105
Peak Forward Current per
Segment or DP
160[1]
90[3]
60[5]
90[7]
mA
DC Forward Current per
Segment or DP
40[2]
30[4]
20[6]
30[8]
mA
Operating Temperature Range
Storage Temperature Range
-20 to +100[9]
-40 to +100
°C
°C
V
-55 to +100
Reverse Voltage per
Segment or DP
3.0
Wave Soldering Temperature for
3 Seconds (1.59 mm [0.063 in.]
below Body)
250
°C
Notes:
1. See Figure 1 to establish pulsed conditions.
2. Derate above 46°C at 0.54 mA/°C.
3. See Figure 6 to establish pulsed conditions.
4. Derate above 53°C at 0.45 mA/°C.
5. See Figure 7 to establish pulsed conditions.
6. Derate above 81°C at 0.52 mA/°C.
7. See Figure 8 to establish pulsed conditions.
8. Derate above 39°C at 0.37 mA/°C.
9. For operation below -20°C, contact your local Agilent components sales office or an authorized distributor.
5
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red
Device
Series
Parameter
Symbol Min.
Typ. Max.
Units
Test Conditions
Luminous Intensity/Segment[1,2,5]
(Digit Average)
IV
8.5
15.0
mcd
IF = 20 mA
1.8
V
IF = 20 mA
Forward Voltage/Segment or DP
VF
2.0
645
637
15
3.0
V
nm
IF = 100 mA
HDSP-
E15x
Peak Wavelength
λPEAK
λd
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
nm
VR
3.0
V
IR = 100 µA
Temperature Coefficient of
VF/Segment or DP
∆VF/°C
-2
mV/°C
Thermal Resistance LED Junction-
RθJ-PIN
340
°C/W/Seg
to-Pin
High Efficiency Red
Device
Series
Parameter
Symbol Min.
Typ. Max.
Units
Test Conditions
5082-761x Luminous Intensity/Segment[1,2,6]
340
800
µcd
IF = 5 mA
(Digit Average)
5082-765x
IV
340
1115
µcd
V
IF = 5 mA
Forward Voltage/Segment or DP
Peak Wavelength
VF
λPEAK
λd
2.1
635
626
30
2.5
IF = 20 mA
nm
nm
V
Dominant Wavelength[3]
All
Reverse Voltage/Segment or DP[4]
VR
3.0
IR = 100 µA
Temperature Coefficient of
VF/Segment or DP
∆VF/°C
-2
mV/°C
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
280
°C/W
6
Yellow
Device
Series
Parameter
Symbol Min.
Typ. Max.
Units
Test Conditions
5082-762x Luminous Intensity/Segment[1,2]
(Digit Average)
205
620
µcd
IF = 5 mA
IV
5082-766x
290
835
µcd
V
IF = 5 mA
Forward Voltage/Segment or DP
Peak Wavelength
VF
2.2
2.5
IF = 20 mA
λPEAK
583
nm
nm
V
Dominant Wavelength[3,7]
All
λd
VR
581.5
3.0
586 592.5
Reverse Voltage/Segment or DP[4]
40
-2
IR = 100 µA
Temperature Coefficient of
VF/Segment or DP
∆VF/°C
mV/°C
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
280
°C/W/Seg
High Performance Green
Device
Test
Series
Parameter
Symbol Min.
Typ. Max.
Units
Conditions
HDSP-360x Luminous Intensity/Segment[1,2]
(Digit Average)
860
2700
µcd
IF = 10 mA
IV
HDSP-460x
1030 4000
µcd
V
IF = 10 mA
IF = 10 mA
Forward Voltage/Segment or DP
Peak Wavelength
VF
λPEAK
λd
2.1
566
571
50
2.5
nm
nm
V
Dominant Wavelength[3,7]
All
577
Reverse Voltage/Segment or DP[4]
VR
3.0
IR = 100 µA
Temperature Coefficient of
VF/Segment or DP
∆VF/°C
-2
mV/°C
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
280
°C/W/Seg
Notes:
1. Device case temperature is 25°C prior to the intensity measurement.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of
the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-E10X series displays are recommended. They are tested at 1 mA dc/segment and are pin
for pin compatible with the HDSP-E15X series.
6. For low current operation, the HER HDSP-335X series displays are recommended. They are tested at 2 mA dc/segment and are pin for
pin compatible with the 5082-7650 series.
7. The Yellow (5082-7620/7660) and Green (HDSP-3600/4600) displays are categorized for dominant wavelength. The category is
designated by a number adjacent to the luminous intensity category letter.
7
AlGaAs Red
50
45
Rθ
= 770°C/W
J-A
AlGaAs RED
40
35
30
25
20
15
10
5
0
20 30 40 50 60 70 80 90 100 110 120
T
– AMBIENT TEMPERATURE – °C
A
Figure 1. Maximum Allowed Peak Current vs. Pulse
Duration – AlGaAs Red.
Figure 2. Maximum Allowable DC Current vs.
Ambient Temperature.
2.00
160
140
1.75
1.50
120
AlGaAs RED
100
1.25
1.00
80
60
40
AlGaAs RED
0.75
0.50
20
0
0.25
0
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
– FORWARD VOLTAGE – V
0
F
5
10
15
20
25
30
35
40
V
I
– FORWARD CURRENT PER SEGMENT – mA
F
Figure 3. Forward Current vs. Forward Voltage.
Figure 4. Relative Luminous Intensity vs. DC
Forward Current.
1.4
1.2
1.0
AlGaAs RED
0.8
0.6
0.5
5.0
50.0 150.0
I
– PEAK FORWARD CURRENT
PER SEGMENT – mA
PEAK
Figure 5. Relative Efficiency (Luminous Intensity
per Unit Current) vs. Peak Current.
8
HER, Yellow, Green
Figure 6. Maximum Tolerable Peak Current vs.
Pulse Duration – HER Series.
Figure 7. Maximum Tolerable Peak Current vs.
Pulse Duration – Yellow Series.
Figure 8. Allowable Peak Current vs.
Pulse Duration – Green Series.
Figure 9. Maximum Allowable DC Current vs.
Ambient Temperature.
Figure 10. Forward Current vs.
Forward Voltage.
Figure 11. Relative Luminous
Intensity vs. DC Forward Current.
Figure 12. Relative Luminous
Efficiency (Luminous Intensity per
Unit Current) vs. Peak Current.
9
Intensity Bin Limits (mcd)
AlGaAs Red
Yellow
HDSP-E15x
5082-762x
Min.
IV Bin Category
Min.
8.67
13.00
19.50
29.30
43.90
Max.
15.90
23.80
35.80
53.60
80.50
IV Bin Category
Max.
0.387
0.582
0.872
1.311
1.967
2.950
4.425
L
M
N
O
P
B
C
D
E
F
0.229
0.317
0.476
0.714
1.073
1.609
2.413
G
H
HER
5082-761x
Min.
5082-766x
Min.
IV Bin Category
Max.
0.630
0.946
1.418
2.127
3.190
4.785
7.177
IV Bin Category
Max.
0.543
0.817
1.225
1.838
2.758
4.137
B
C
D
E
F
0.369
0.516
0.774
1.160
1.740
2.610
3.915
C
D
E
F
G
H
0.297
0.445
0.669
1.003
1.504
2.256
G
H
Green
5082-765x
Min.
HDSP-360x
Min.
IV Bin Category
Max.
0.593
0.890
1.333
2.000
3.000
4.500
6.751
IV Bin Category
Max.
1.58
2.37
3.55
5.33
8.01
B
C
D
E
F
0.347
0.485
0.728
1.091
1.636
2.454
3.682
H
I
J
K
L
0.86
1.29
1.94
2.90
4.37
G
H
HDSP-460x
Min.
IV Bin Category
Max.
1.88
2.82
4.23
6.34
9.50
14.26
G
H
I
J
K
L
1.03
1.54
2.31
3.46
5.18
7.78
10
Color Categories
Dominant Wavelength (nm)
Color
Yellow
Bin
1
3
2
4
2
3
4
5
Min.
Max.
581.50
584.00
586.50
589.00
573.00
570.00
567.00
564.00
585.00
587.50
590.00
592.50
577.00
574.00
571.00
568.00
Green
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your Agilent
representatives for further clarification/information.
Contrast Enhancement
For information on contrast
enhancement, please see
Application Note 1015.
Soldering/Cleaning
For information on soldering
LEDs, please refer to Application
Note 1027.
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152 (Domestic/Interna-
tional), or 0120-61-1280 (Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2004 Agilent Technologies, Inc.
Obsoletes 5963-7394E
July 17, 2004
5988-3325EN
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明