HLMP-WLXX [AGILENT]

High Intensity AlInGaP LED Lamps; 高强度的AlInGaP LED灯
HLMP-WLXX
型号: HLMP-WLXX
厂家: AGILENT TECHNOLOGIES, LTD.    AGILENT TECHNOLOGIES, LTD.
描述:

High Intensity AlInGaP LED Lamps
高强度的AlInGaP LED灯

文件: 总7页 (文件大小:155K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
High Intensity AlInGaP  
LED Lamps  
SunPower Series  
HLMP-WLxx  
HLMP-WHxx  
HLMP-WGxx  
HLMP-NL06  
HLMP-NH04  
HLMP-NG07  
Technical Data  
Features  
Description  
This family of 3 mm and 5 mm  
LED lamps is specially designed  
for applications requiring higher  
levels of intensity than is  
• T-1 (3 mm) and T-1 3/4  
(5 mm) General Purpose  
LED Lamps  
• AlInGaP SunPower Intensity  
• High Light Output  
• Clear and Tinted Diffused  
Lens Options  
• Narrow and Wide Viewing  
Angles  
achieved with a standard lamp.  
The 5 mm lamp is available with  
15, 30, and 65 degree viewing  
angle options. The 3 mm lamp is  
available with a 60 degree  
viewing angle.  
• Amber, Red-Orange, and Red  
• Available on Tape and Reel  
Applications  
• General Purpose  
• Consumer Goods  
• Indicator Lights  
Device Selection Guides  
T-1 3/4 (5 mm) Lamp  
Package  
Diff. Tint  
Luminous Intensity  
Min. mcd, If @ 20 mA  
Viewing Angle  
2θ 1/2 (Degrees)  
Color  
Amber  
Part Number  
HLMP-WL12  
HLMP-WL27  
HLMP-WL02  
HLMP-WH12  
HLMP-WH27  
HLMP-WH02  
HLMP-WG12  
HLMP-WG27  
HLMP-WG02  
450  
205  
35  
270  
155  
35  
270  
155  
26  
15  
30  
65  
15  
30  
65  
15  
30  
65  
Amber  
Amber  
Red Orange  
Red Orange  
Red Orange  
Red  
X
X
X
X
X
Red  
Red  
X
T-1 (3 mm) Lamp  
Package  
Luminous Intensity  
Viewing Angle  
Color  
Part Number  
HLMP-NL06  
HLMP-NH04  
HLMP-NG07  
Diff.  
Tint  
Min. mcd, If @ 20 mA  
2θ 1/2 (Degrees)  
Amber  
Red Orange  
Red  
96.2  
90.2  
90.2  
60  
60  
60  
2
Technical Data  
Amber  
(λd = 590 nm)[1]  
Red-Orange  
(λd = 615 nm)[1]  
Red  
(λd = 626 nm)[1]  
Minimum  
Luminous  
Intensity  
Iv (mcd)[3,4]  
@ 20 mA  
Minimum  
Luminous  
Intensity  
Iv (mcd)[3,4]  
@ 20 mA  
Minimum  
Luminous  
Intensity  
Iv (mcd)[3,4]  
@ 20 mA  
Typical  
Viewing  
Angle, 2θ1/2  
(Deg.)[2] HLMP-  
Package  
Drawing/  
Nominal  
Part  
No.  
Part  
No.  
HLMP-  
Part  
No.  
HLMP-  
,
,
,
Epoxy Diameter  
15  
30  
65  
WL12  
WL27  
WL02  
450  
205  
35  
WH12  
WH27  
WH02  
270  
155  
35  
WG12  
WG27  
WG02  
270  
155  
26  
clear  
clear  
A/5 mm  
A/5 mm  
A/5 mm  
tinted  
diffused[5]  
60  
NL06  
96.2  
NH04  
90.2  
NG07  
90.2  
clear  
B/3 mm  
Notes:  
1. Dominant Wavelength, λd, is derived from the CIE Chromaticity Diagram, and represents the color of the lamp.  
2. Θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity.  
3. The luminous intensity is measured on the mechanical axis of the lamp package.  
4. The optical axis is closely aligned with the package mechanical axis.  
5. Tinting of amber lamps is yellow, red-orange lamps are tinted a reddish orange, and red lamps are tinted red.  
Package Dimensions  
B
A
3.80 ± 0.30  
3.10 ± 0.20  
5.00 ± 0.20  
(0.197 ± 0.008)  
3.35 ± 0.30  
1.14 ± 0.20  
(0.045 ± 0.008)  
8.71 ± 0.20  
(0.343 ± 0.008  
5.70 ± 0.5  
2.00  
0.8 MAX.  
(MENISCUS)  
2.35 (0.093)  
MAX.  
0.65 MAX.  
31.60  
(1.244)  
MIN.  
0.70 (0.028)  
MAX.  
23.0 MIN.  
5.80 ± 0.20  
(0.228 ± 0.008)  
CATHODE  
CATHODE  
FLAT  
LEAD  
0.44 ± 0.2  
2.54 ± 0.38  
(0.100 ± 0.015)  
1.0 MIN.  
0.50 ± 0.10  
(0.020 ± 0.004)  
3.60  
SQ. TYP.  
1.00  
(0.039)  
MIN.  
+ 0.1  
– 0  
2.54 ± 0.3  
0.4  
3
Absolute Maximum Ratings at TA = 25°C  
Parameter  
5 mm  
3 mm  
30 mA[2,3,4]  
50 mA  
DC Forward Current  
50 mA[1,3,4]  
Peak Pulsed Forward Current [3,4]  
Average Forward Current  
Reverse Voltage (IR = 100 µA)  
LED Junction Temperature  
Operating Temperature  
70 mA  
30 mA  
30 mA  
5 V  
5 V  
130°C  
110°C  
-40°C to +100°C  
-40°C to +120°C  
-40°C to +80°C  
-40°C to +85°C  
Storage Temperature  
Dip/Drag Solder Temperature  
Wave Solder Temperature  
260°C for 5 seconds  
245°C for 3 seconds  
[1.59 mm (0.060 in.) below seating plane]  
Notes:  
1. Derate linearly as shown in Figure 4.  
2. Derate linearly as shown in Figure 5.  
3. For long term performance with minimal light output degradation, drive currents between 10 and 30 mA are recommended.  
4. Please contact your Agilent sales representative about operating currents below 10 mA.  
Electrical/Optical Characteristics at TA = 25°C  
Parameter  
Symbol  
Min.  
Typ.  
Max.  
Units  
Test Conditions  
IF = 20 mA  
Forward Voltage  
Amber (λd = 590 nm)  
Red-Orange (λd = 615 nm)  
Red (λd = 626 nm)  
2.02  
1.94  
1.90  
VF  
VR  
2.4  
V
V
Reverse Voltage  
5
20  
IR = 100 µA  
Peak Wavelength  
Amber  
Red-Orange  
Red  
Peak of Wavelength of  
Spectral Distribution  
at IF = 20 mA  
592  
621  
635  
λPEAK  
∆λ1/2  
nm  
nm  
Spectral Halfwidth  
17  
Wavelength Width at  
Spectral Distribution  
1/2 Power point at  
IF = 20 mA  
Speed of Response  
τs  
20  
ns  
Exponential Time  
Constant, e-t/τ  
s
Capacitance  
C
40  
pF  
VF = 0, f = 1 MHz  
Thermal Resistance  
RΘJ-PIN  
240  
°C/W  
LED Junction-to-Cathode  
Lead  
Luminous Efficacy[5]  
Amber  
Red-Orange  
Red  
Emitted Luminous  
Power/Emitted Radiant  
Power  
500  
235  
155  
ηv  
lm/W  
Note:  
1. The radiant intensity, Ie, in watts per steridian, may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in  
candelas and ηv is the luminous efficacy in lumens/watt.  
4
1.0  
70  
60  
50  
40  
30  
RED-ORANGE  
RED  
AMBER  
AMBER  
0.5  
RED  
20  
10  
0
0
550  
600  
650  
700  
1.0  
1.5  
2.0  
2.5  
3.0  
WAVELENGTH – nm  
V
– FORWARD VOLTAGE – V  
F
Figure 1. Relative Intensity vs. Peak Wavelength.  
Figure 2. Forward Current vs.  
Forward Voltage.  
3.0  
50  
2.5  
2.0  
1.5  
1.0  
40  
30  
20  
Rθ = 585° C/W  
JA  
Rθ = 780° C/W  
JA  
10  
0
0.5  
0
0
20  
40  
60  
0
20  
40  
60  
80  
100  
I
– DC FORWARD CURRENT – mA  
T
– AMBIENT TEMPERATURE – °C  
F
A
Figure 3. Relative Luminous Intensity  
vs. Forward Current.  
Figure 4. Maximum Forward Current  
vs. Ambient Temperature for 5 mm  
Lamps. Derating Based on T JMAX  
=
130°C.  
30  
Rθ = 500° C/W  
JA  
20  
10  
0
Rθ = 660° C/W  
JA  
0
10 20 30 40 50 60 70 80 90  
T
– AMBIENT TEMPERATURE – °C  
A
Figure 5. Maximum Forward Current  
vs. Ambient Temperature for 3 mm  
Lamps. Derating Based on T JMAX  
110°C.  
=
5
1.0  
0.9  
0.8  
0.7  
0.6  
0.5  
0.4  
0.3  
0.2  
0.1  
0
-25  
-20  
-15  
-10  
-5  
0
5
10  
15  
20  
25  
ANGULAR DISPLACEMENT – DEGREES  
Figure 6. Representative Spatial Radiation Pattern for 15°  
Viewing Angle T-1 3/4 (5 mm) Lamps (HLMP-WX12).  
1.0  
0.9  
0.8  
0.7  
0.6  
0.5  
0.4  
0.3  
0.2  
0.1  
0
-25  
-20  
-15  
-10  
-5  
0
5
10  
15  
20  
25  
ANGULAR DISPLACEMENT – DEGREES  
Figure 7. Representative Spatial Radiation Pattern for 30°  
Viewing Angle T-1 3/4 (5 mm) Lamps (HLMP-WX27).  
1.0  
0.9  
0.8  
0.7  
0.6  
0.5  
0.4  
0.3  
0.2  
0.1  
0
-100  
-80  
-60  
-40  
-20  
0
20  
40  
60  
80  
100  
ANGULAR DISPLACEMENT – DEGREES  
Figure 8. Representative Spatial Radiation  
Pattern for 65° Viewing Angle Tinted/Diffused  
T-1 3/4 (5 mm) Lamps (HLMP-WX02).  
6
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
-90 -80 -70 -60 -50 -40 -30 -20 -10  
0
10 20 30 40 50 60 70 80 90  
ANGULAR DISPLACEMENT – DEGREES  
Figure 9. Representative Spatial Radiation  
Pattern for 60°Viewing Angle T-1 (3 mm) Lamps  
(HLMP-NL06/NH04/NG07).  
www.semiconductor.agilent.com  
Data subject to change.  
Copyright © 1999 Agilent Technologies, Inc.  
Obsoletes 5965-9780E (7/97)  
5968-0947E (11/99)  

相关型号:

HLMP-Y402-G0000

T-1 (3 mm) GaP/GaAsP LED Lamps
AVAGO

HLMP-Y502-F0000

T-1 SINGLE COLOR LED, GREEN, 3mm, ROHS COMPLIANT PACKAGE-2
AVAGO

HLMP-Y601

The junction temperature of the device determines
AVAGO

HLMP-Y601-J00XX

T-1 (3 mm) AlInGaP LED Lamps
BOARDCOM

HLMP-Y651

The junction temperature of the device determines
AVAGO

HLMP-Y651-G0000

T-1 SINGLE COLOR LED, DEEP RED, 3mm, ROHS COMPLIANT, PLASTIC PACKAGE-2
AVAGO

HLMP-Y651-G00XX

T-1 (3 mm) AlInGaP LED Lamps
BOARDCOM

HLMP-Y701

The junction temperature of the device determines
AVAGO

HLMP-Y701-G0000

T-1 SINGLE COLOR LED, AMBER, 3mm, ROHS COMPLIANT, PLASTIC PACKAGE-2
AVAGO

HLMP-Y701-G00DD

GENERAL PURPOSE VISIBLE DOME-STYLE LED,AMBER,LED-2B
AVAGO

HLMP-Y701-G00XX

T-1 (3 mm) AlInGaP LED Lamps
BOARDCOM

HLMP-Y801

The junction temperature of the device determines
AVAGO