1-332446-1 [AIC]
STRATO-THERM Terminals & Splices for High Temperature Applications;
| 型号： | 1-332446-1 |
| 厂家： | 
ANALOG INTERGRATIONS CORPORATION |
| 描述： | STRATO-THERM Terminals & Splices for High Temperature Applications 端子和端子排 |
| 文件： | 总24页 (文件大小：369K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Product Facts
■ Product available in tem-
perature ranges of 500°F
[260°C], 550°F [288°C],
650°F [343°C] and 1200°F
[649°C]
■ Product employs the
famous “W” and “C” crimp
■ Wide range of wire sizes
■ Complete line of related
application tooling
■ Accommodates solid
and/or stranded conductors
Heat…extreme heat…sear-
ing temperatures up to
1200°F [649°C]. This is one
of the most challenging
environments that electrical/
electronic circuitry has ever
entered.
Different types of high tem-
perature terminals and
splices found in this catalog
are as follows:
Need more information?
Call the AMP Product
Information Center:
1-800-522-6752
PIDG Terminals and
Splices, and Pre-Insulated
Spare Wire Caps — 550°F
[288°C] Range
The Product Information
Center is staffed with
specialists well versed in all
AMP products. The Center
can provide you with:
If heat is an unavoidable
dimension in your circuit
design and production, this
product is an important ally.
In this AMP line of
STRATO-THERM terminals
and splices, you’ll find high
temperature circuit hard-
ware. You’ll also find solu-
tions to other more familiar
circuit problems such as
vibration, corrosion and
flash-over, when they occur
at high temperatures.
PIDG Insulation Restriction
Terminals — 550°F [288°C]
Range
■
■
■
■
■
Technical Support
Catalogs
Technical Documents
Product Samples
AMP Authorized
Distributor Locations
Post-Insulated Terminals
and Splices— 550°F [288°C]
Range
Uninsulated Terminals and
Splices — 650°F [343°C]
Range
Uninsulated Terminals and
Splices — 1200°F [649°C]
Range
Specifications subject to change.
Consult AMP Incorporated for latest
design specifications.
© Copyright 1965, 1966, 1970, 1972,
1973, 1974, 1975, 1977, 1980, 1983,
1991 and 1998 by AMP Incorporated.
All Rights Reserved.
AMP, STRATO-THERM, PIDG,
DIAMOND GRIP, SOLISTRAND,
CERTI-CRIMP, AMP-TAPETRONIC,
DYNA-CRIMP are Trademarks.
TEFLON—Trademark of E.I. duPont, Inc.
1
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 4
Insulated Terminals and Splices:
PIDG (Pre-Insulated Diamond Grip)
Ring Tongue Terminals — 550°F [288°C] and 500°F [260°C] . . . . . . . . . . . . . . . . . 5, 6
Insulation Restriction Ring Tongue Terminals — 550°F [288°C] . . . . . . . . . . . . . . . . . 6
Splices — 500°F [260°C] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Spare Wire Caps — 550°F [288°C] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Post Insulated
Ring Tongue Terminals — 500°F [260°C] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Splices — 550°F [288°C] and 500°F [260°C] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Uninsulated Terminals and Splices:
Non-Insulation Support
Heat Resistant 650°F [343°C]—
Ring Tongue Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 10
Splices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
High Temperature 1200°F [649°C]—
Ring Tongue Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Spade Tongue Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Splices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Insulation Support
Heat Resistant 650°F [343°C]—
Ring Tongue Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Splices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
High Temperature 1200°F [649°C]—
Ring Tongue Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
Splices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-21
Numerical Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Introduction
Because of features such
as a one-piece constructed
inner sleeve and a wide
funnel entry design which
facilitates wire entry, stan-
dard STRATO-THERM PIDG
tooling may be used to ter-
minate this product.
PIDG Terminals and
Splices, and Pre-Insulated
Spare Wire Caps
Uninsulated Terminals
and Splices
1200°F [649°C] Range
550°F [288°C] Range
Post-Insulated
Terminals and Splices
550°F [288°C] Range
Nickel material is used for
the body of both the termi-
nal and splice. They are
available with or without
wire insulation support
sleeve of nickel-silver alloy
material. Accommodating
either solid or stranded con-
ductors in different combi-
nations, these terminals and
splices are made to cover a
broad wire size range, listed
in the tabular data section.
Designed for reliable perfor-
mance up to 550°F [288°C],
this line of ring-tongue
terminals, butt splices and
spare wire caps features a
pre-insulation sleeve of
TEFLON TFE insulation
material. A special funnel
entry feature has been
added to assure easy entry
and proper seating of wire.
The body is copper with a
choice of gold over nickel
plating or nickel plating.
The terminal and splice
barrel accommodates
The temperature range of
these terminals and splices
is 550°F [288°C] for nickel
plating and gold over nickel
plated copper, and 500°F
[260°C] for silver plating,
These terminals and splices
accommodate solid and/or
stranded conductors.
Terminals made of alumel
and chromel material with
nickel-silver alloy sleeves
are available for thermo-
couple applications. When
using either alumel or
chromel conductors, a ter-
minal of the same material
should be selected.
stranded wire conductors
only. The spare wire caps
are designed for unstripped
wire.
Uninsulated Terminals
and Splices
650°F [343°C] Range
PIDG Insulation
Restriction Terminals
550°F [288°C] Range
These terminals and splices
are available with and with-
out wire insulation support.
Both types are manufac-
tured from electrolytic cop-
per, plated with nickel. In the
insulation support type, the
support sleeve is fabricated
from nickel-silver alloy. Both
types accommodate solid or
stranded conductors in vari-
ous combinations. Wire size
range is listed in the tabular
data section.
These pre-insulated insula-
tion restriction terminals
prevent the insulation of
thin-wall insulation wire from
entering the terminal’s wire
crimp area during the
crimping process.
Designed for reliable perfor-
mance up to 550°F [288°C],
these terminals feature a
pre-insulation sleeve of
TEFLON (TFE) insulation
material.
3
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Introduction (Continued)
All terminals and splices are
Ordering Information
Wire Range
Standard Quantities
listed according to wire size
AWG
Loose Piece
Tape Mounted
and type of terminal or
26–14
1,000
—
5,000
2,500
2,500
—
splice. If the part number of
26–22
the terminal or splice is
12–10
500
100
50
known, refer to the
8, 6, 4
2, 1⁄0
Numerical Index, at the
back of this catalog, for
page location of tabular
data.
—
Note: Package quantities may vary with specific part numbers.
In the Tabular Data Section,
part numbers are available
in either loose piece or tape
mounted form.
When ordering tape mount-
ed part numbers, specify
the terminal or splice part
number, the total quantity of
parts desired (if applicable).
The chart to the right lists
by wire size the type of
packaging available and
the quantity per package.
STRATO-THERM PIDG
“W” Crimp
The Crimp
All five types of
terminals and splices
STRATO-THERM terminals
and splices provide opti-
mum corrosion and vibration
resistance plus outstanding
tensile characteristics.
employ the equally reliable
confined “C” crimp plus
multiple position insulation
support crimp for today’s
smaller insulated wires. This
“C” crimp is especially suit-
ed to crimping the terminal
barrel and insulation sleeve
to stranded wire conduc-
tors. The photomacrograph
shows the results of “C”
crimping. Virtually the same
electromechanical proper-
ties are obtained as in the
“W” crimp. Pre-insulated
spare wire caps and post-
insulated splices are
All types, except the
STRATO-THERM PIDG ter-
minals, splices and pre-
insulated spare wire caps,
employ the famous “W”
crimp which creates the
precise electromechanical
properties necessary for
solid and/or stranded con-
ductor combinations. A
proper crimp will provide a
uniform and permanent
attachment. When mechani-
cal pressure is applied to
the terminal barrel, the wire
inside is forced into the ser-
rations or dimples of the
barrel. Shown are four typi-
cal photomacrographs of
the “W” crimp, illustrating
the results of crimping vari-
ous conductor combina-
tions. In each case, the
action of the crimp has
compressed the conductors
and the barrel into a
One Solid
One Solid
Two Stranded
crimped with an “O” crimp
configuration.
Confined C
Two Solid
homogenous mass.
One Stranded
4
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Insulated Terminals and Splices
Temperature Rating,
Material and Finish
Related Product Data
PIDG (Pre-Insulated
Diamond Grip)
Ring Tongue Terminals
Application Tooling— pages 17-21
Insulation —TEFLON
Terminal Body— Copper per
ASTM B152
Plating — Nickel per QQ-N-290,
550°F [288°C]. Gold per MIL-G-
45204 over Nickel per QQ-N-290
500°F [260°C]
Metallic Sleeve— Copper per
ASTM B152
Plating — Nickel per QQ-N-290,
550°F [288°C]
Tongue
Wire
Dimensions
Part Numbers
Body
Terminal
Insulation
Color
Wire Size
Circular Mils
[mm2]
Material
Thickness
Max.
Stud
Size
Insulation
Diameter
Max.
C
E
Max.
L
Max.
Loose
Piece
Tape
Plating1
W
Min.
Mounted
.203
.211
.542
.646
.082
4
Black
Black
Nickel
Nickel
Nickel
Nickel
Gold
50829
50830
—
26-24
238-475
[0.12-0.24]
5.16
5.36
13.77
16.41
2.08
.020
0.51
6
M3.5
.250
6.35
.281
7.14
.612
15.54
.740
18.80
.082
2.08
—
.281
7.14
.250
6.35
.631
16.03
.774
19.66
.100
2.54
4
Green
Green
Green
Green
Green
Green
Green
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
Orange
White
50831
—
.281
7.14
.250
6.35
.631
16.03
.774
19.66
.100
2.54
50831-1
1-332433-0
50832
—
6
M3.5
.281
7.14
.250
6.35
.631
16.03
.774
19.66
.100
2.54
—
22-20
509-1,290
[0.26-0.65]
.025
0.64
.312
7.92
.281
7.14
.662
16.81
.821
20.85
.100
2.54
Nickel
Gold
50832-2
8
M4
.312
7.92
.281
7.14
.662
16.81
.821
20.85
.100
2.54
332434
50832-1
1-332434-0
50834
—
.312
7.92
.281
7.14
.662
16.81
.821
20.85
.100
2.54
Nickel
Gold
50832-3
10
4
.312
7.92
.281
7.14
.662
16.81
.821
20.85
.100
2.54
—
—
.218
5.54
.156
3.96
.560
14.22
.672
17.07
.135
3.43
Nickel
Nickel
Gold
.281
7.14
.250
6.35
.654
16.61
.797
20.24
.135
3.43
50835
50835-1
—
6
M3.5
.281
7.14
.250
6.35
.654
16.61
.797
20.24
.135
3.43
332453
50836
.312
7.92
.281
7.14
.685
17.40
.844
21.44
.135
3.43
Nickel
Gold
—
18-16
1,600-2,800
[0.81-1.42]
.033
0.84
8
M4
.312
7.92
.281
7.14
.685
17.40
.844
21.44
.135
3.43
332454
50836-1
1-332454-0
50837
—
.312
7.92
.281
7.14
.685
17.40
.844
21.44
.135
3.43
Nickel
Gold
50836-3
—
10
.312
7.92
.281
7.14
.685
17.40
.844
21.44
.135
3.43
1/4
M6
.468
11.89
.437
11.10
.841
21.36
1.078
27.38
.135
3.43
Nickel
Nickel
Nickel
Gold
—
.531
13.49
.531
13.49
.924
23.47
1.192
30.28
.135
3.43
3⁄8
50838
—
.250
6.35
.171
4.34
.575
14.61
.703
17.86
.150
3.81
50839-1
1-332438-0
50840
—
6
M3.5
.250
6.35
.171
4.34
.575
14.61
.703
17.86
.150
3.81
White
—
8
M4
.343
8.71
.281
7.14
.685
17.40
.859
21.82
.150
3.81
White
Nickel
Nickel
Gold
—
14
4,234
[2.15]
.033
0.84
.343
8.71
.281
7.14
.685
17.40
.859
21.82
.150
3.81
White
50840-1
1-332439-0
50841
—
10
.343
8.71
.281
7.14
.685
17.40
.859
21.82
.150
3.81
White
—
1/4
M6
.468
11.89
.437
11.10
.841
21.36
1.078
27.38
.150
3.81
White
Nickel
—
1Nickel plated parts are to be used with nickel plated wire. Gold plated parts are to be used with silver plated wire.
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
5
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Insulated Terminals and Splices (Continued)
Temperature Rating,
Material and Finish
Related Product Data
PIDG (Pre-Insulated
Diamond Grip)
Ring Tongue Terminals
(Continued)
Application Tooling— pages 17-21
Insulation —TEFLON
Terminal Body— Copper per
ASTM B152
Plating — Nickel per QQ-N-290,
550°F [288°C]. Gold per MIL-G-
45204 over Nickel per QQ-N-290
500°F [260°C]
Metallic Sleeve— Copper per
ASTM B152
Plating — Nickel per QQ-N-290,
550°F [288°C]
Tongue
Wire
Dimensions
Part Numbers
Body
Terminal
Insulation
Color
Wire Size
Circular Mils
[mm2]
Material
Thickness
Max.
Stud
Size
Insulation
Diameter
Max.
C
E
Max.
L
Max.
Loose
Piece
Tape
Plating1
W
Min.
Mounted
.281
.219
.794
.937
.214
4
Black
Black
Black
Black
Black
Black
Black
Black
Nickel
Nickel
Nickel
Nickel
Gold
50844
50845
—
—
—
—
—
—
—
—
7.14
5.56
20.17
23.80
5.44
6
M3.5
.375
9.53
.302
7.67
.893
22.68
1.083
27.51
.214
5.44
8
M4
.375
9.53
.302
7.67
.893
22.68
1.083
27.51
.214
5.44
50845-1
50845-2
1-332446-1
50846
.375
9.53
.302
7.67
.893
22.68
1.083
27.51
.214
5.44
12-10
5,180-13,100
[2.62-6.64]
.042
1.07
10
.375
9.53
.302
7.67
.893
22.68
1.083
27.51
.214
5.44
1/4
M6
.531
13.49
.437
11.10
1.012
25.70
1.280
32.51
.214
5.44
Nickel
Nickel
Nickel
5/16
M8
.531
13.49
.468
11.89
1.059
26.90
1.327
33.71
.214
5.44
50847
.593
15.06
.531
13.49
1.106
28.09
1.405
35.69
.214
5.44
3/8
50848
1Nickel plated parts are to be used with nickel plated wire. Gold plated parts are to be used with silver plated wire.
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
Temperature Rating,
Material and Finish
Related Product Data
PIDG (Pre-Insulated
Diamond Grip)
Ring Tongue Terminals
(Insulation Restricting)
Application Tooling— pages 17-21
Insulation —TEFLON
Terminal Body and Metallic
Sleeve —Copper per ASTM B152
Plating — Nickel per QQ-N-290,
550°F [288°C]
Tongue
Wire
Dimensions
Wire Size
Circular Mils
[mm2]
Terminal
Insulation
Color
Part Numbers
Loose Piece
Material
Thickness
Max.
Stud
Size
Insulation
Diameter
Max.
W
C
E
Max.
L
Max.
Min.
24
.020
.300
.281
.652
.807
.055
475
10
4
Blue
55114-1
53572-1
53587-1
0.51
7.62
7.14
16.56
20.50
1.40
[0.24]
22
.025
0.64
.281
7.14
.250
6.35
.666
16.92
.809
20.55
.110
2.79
754
Green
Yellow
[0.38]
12
6,654
[3.37]
.042
1.07
.375
9.53
.302
7.67
.933
23.70
1.123
28.52
.200
5.08
10
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
6
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Insulated Terminals and Splices (Continued)
Related Product Data
Temperature Rating,
Material and Finish
Pre-Insulated
Butt Splices
Application Tooling— pages 17-21
Insulation —TEFLON
Splice Body—Copper per
ASTM B152
Plating — Gold per MIL-G-45204
over Nickel per QQ-N-290, 500°F
[260°C]
Metallic Sleeve— Copper per
ASTM B152
Plating — Nickel per QQ-N-290,
550°F [288°C]
Wire
Wire Size
Circular Mils
[mm2]
Metallic
Sleeve
Color
Dimension
L Max.
Part Numbers
Insulation
Diameter
Max.
Loose Piece
22-20
1.156
.100
509-1,290
[0.26-0.65]
Natural
Red
330377
29.36
2.54
18-16
1,600-2,800
[0.81-1.42]
1.531
38.89
.140
3.56
330378
14-12
3,831-6,654
[1.94-3.37]
1.781
45.24
.170
4.32
Blue
330379
Temperature Rating,
Material and Finish
Related Product Data
Pre-Insulated
Spare Wire Caps
(For Unstripped Wire)
Application Tooling— shown this
page
Insulation —TEFLON
Ring — Copper per ASTM B152
Plating — Nickel per QQ-N-290,
550°F [288°C]
Wire
Tool
Dimension
Insulation
Diameter
Range
Ring
Part
Color
Color
Numbers
L Max.
Guide
Green
Green
Green
Green
Green
Orange
Orange
White
.036–.043
0.91–1.09
.500
12.70
Red and Green
Blue and Green
Yellow and Green
Brown and Green
Violet and Green
Black and Orange
Gray and Orange
Nickel and Nickel
328854
328855
328856
328857
328858
328859
328860
328861
.044–.051
1.12–1.30
.500
12.70
.052–.056
1.32–1.42
.500
12.70
.056–.064
1.42–1.63
.500
12.70
.065–.074
1.65–1.88
.500
12.70
.075–.087
1.91–2.21
.500
12.70
.088–.110
2.24–2.79
.500
12.70
.125–.138
3.18–3.51
.500
12.70
Tool Part No.
69272-1
7
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Insulated Terminals and Splices (Continued)
Post-Insulated
Ring Tongue Terminals
Temperature Rating,
Material and Finish
Plating — Silver per QQ-S-365,
500°F [260°C], Gold per MIL-G-
45204 over Nickel per QQ-N-290,
500°F [260°C]
Ring — Copper per ASTM B152,
Aluminum per QQ-A-250/1
Plating — Nickel per QQ-N-290,
550°F [288°C]
Insulation —TEFLON
Terminal Body— Copper per
ASTM B152
Related Product Data
Application Tooling— pages 17-21
Dimensions
Stud
Tongue
Wire
Part No.
Wire Size
Circular Mils
[mm2]
Ring
Color
Code
Body
Plating
Ring
Material
Ring
Plating
Material
Thickness
Max.
Insulation
W
L Dim.
Approx.
Loose
Piece
Size
Diameter
Range
(After Crimping)
22-20
.025
8
.312
.906
.046-.063
326760
509-1,290
[0.26-0.65]
Silver
Gold
Gold
Copper
Nickel
—
Natural
Red
0.64
M4
7.92
23.01
1.17-1.60
8
.051
1.30
.469
11.91
1.560
39.62
.215-.255
329580
13,100-20,800
[6.64-10.5]
10
10
Aluminum
Aluminum
5.46-6.48
6
.060
1.52
.468
11.89
1.870
47.50
.270-.310
329583
20,800-33,100
[10.5-16.8]
—
Blue
6.86-7.87
Post-Insulated
Splices
Temperature Rating,
Material and Finish
Plating — Gold per MIL-G-45204
over Nickel per QQ-N-290, 500°F
[260°C], Nickel per QQ-N-290,
550°F [288°C], Silver per QQ-S-
365, 500°F [260°C]
Ring — Aluminum per QQ-A-250/1,
Copper per ASTM B152
Plating — Nickel per QQ-N-290,
550°F [288°C]
Insulation —TEFLON
Bushing —TEFLON
Splice Body—Copper per
ASTM B152
Related Product Data
Application Tooling— pages 17-21
Dimension
Part No.
Wire Size
Circular Mils
[mm2]
Ring
Color
Code
Splice
Plating
Ring
Material
Ring
Plating
Wire Insulation
Diameter Range
L Dim. Approx.
(After Crimping)
Loose
Piece
26-24
.937
.040-.050
238-475
Gold
Aluminum
Copper
—
Yellow
Natural
324370
23.80
1.02-1.27
[0.12-0.24]
1.062
26.97
.080-.100
2.03-2.54
Silver
Nickel
3268351
22-20
509-1,290
[0.26-0.65]
1.650
41.91
.050-.068
1.27-1.73
Nickel
Gold
Aluminum
Aluminum
—
—
Red
Red
55235-1
329647
18-16
1,600-2,800
[0.81-1.42]
1.312
33.32
.064-.088
1.63-2.24
8
1.921
48.79
.215-.255
5.46-6.48
13,100-20,800
[6.64-10.5]
Gold
Aluminum
—
Red
329716
1No bushing
8
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices
Temperature Rating,
Solistrand
Heat Resistant
Ring Tongue Terminals
Material and Finish
Terminal Body— Copper per
ASTM B152
Plating — Nickel per QQ-N-290,
650°F [343°C]
Related Product Data
Application Tooling— pages 17-21
Non-Insulation Support
Non-Insulation Support
(Wire Range 2 & 1/0)
Tongue
Wire Size
Dimensions
Style
Part Numbers
Material
Stud
Size
Circular Mils
Thickness
[mm2]
W
C
E
L
Max.
Loose
Piece
Tape
Mounted
Max.
Max.
.218
.156
.337
.449
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
322797
323219
322798
322799
322693
322805
322694
—
—
—
—
—
—
—
5.54
3.96
8.56
11.40
6
M3.5
.281
7.14
.250
6.35
.436
11.07
.574
14.58
22-16
.033
0.84
509-3,260
8
M4
.281
7.14
.250
6.35
.436
11.07
.574
14.58
[0.26-1.65]
.281
7.14
.250
6.35
.436
11.07
.574
14.58
10
.343
8.71
.281
7.14
.462
11.73
.636
16.15
6
M3.5
.250
6.35
.171
4.34
.352
8.94
.480
12.19
16-14
.033
8
M4
.343
8.71
.281
7.14
.462
11.73
.636
16.15
2,050-5,180
0.84
[1.04-2.62]
.343
8.71
.281
7.14
.462
11.73
.636
16.15
10
322695* 2-322695-2
1/4
M6
.469
11.91
.437
11.10 15.70
.618
.855
21.72
322733
323060
323061
—
—
—
6
M3.5
.375
9.53
.302
7.67
.575
14.61
.765
19.43
8
M4
.375
9.53
.302
7.67
.575
14.61
.765
19.43
.375
9.53
.302
7.67
.575
14.61
.765
19.43
10
323062 2-323062-2
12-10
.042
5,180-13,100
1.07
1/4
M6
.531
13.49
.468
11.89 18.69
.736
1.004
25.50
[2.62-6.64]
323063
323064
323065
2-324061-5
323165
323166
323167
323168
323169
323170
323171
323172
—
—
—
—
—
—
—
—
—
—
—
—
5/16
M8
.531
13.49
.468
11.89 18.69
.736
1.004
25.50
.593
15.06
.531 .799
13.49 20.29
1.098
27.89
3/8
8
M4
.406
10.31
.359
9.12
.743
18.87
.949
24.10
.406
10.31
.359
9.12
.743
18.87
.949
24.10
10
8
1/4
M6
.469
11.91
.359
9.12
.696
17.68
.933
23.70
.051
1.30
13,100-20,800
[6.64-10.5]
5/16
M8
.562
14.27
.406
10.31 20.07
.790
1.074
27.28
.594
15.09
.531
13.49 22.05
.868
1.168
29.67
3/8
10
.468
11.89
.531 .931
13.49 23.65
.531 .931
13.49 23.65
.531 .931
13.49 23.65
.531 .931
13.49 23.65
1.168
29.67
1/4
M6
.468
11.89
1.168
29.67
6
.060
1.52
20,800-33,100
[10.5-16.8]
5/16
M8
.625
15.88
1.246
31.65
.625
15.88
1.246
31.65
3/8
*Available in small packaging quantities.
9
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices (Continued)
Temperature Rating,
Solistrand
Material and Finish
Heat Resistant
Ring Tongue Terminals
(Continued)
Terminal Body— Copper per
ASTM B152
Plating — Nickel per QQ-N-290,
650°F [343°C]
Related Product Data
Application Tooling— pages 17-21
Non-Insulation Support
Non-Insulation Support
(Wire Range 2 & 1/0)
Tongue
Wire Size
Dimensions
Part Numbers
Material
Stud
Size
Style
Circular Mils
Thickness
[mm2]
W
C
E
Max.
L
Max.
Loose
Piece
Tape
Mounted
Max.
1/4
M6
.500
.437
.946
1.199
A
A
A
323173
323174
323175
—
—
—
12.70
11.10 24.03
30.45
4
.073
5/16
M8
.625
15.88
.500
12.70 25.63
1.009
1.324
33.63
33,100-52,600
1.85
[16.8-26.7]
.625
15.88
.500 1.009
12.70 25.63
.540 1.212
13.72 30.78
1.324
33.63
3/8
2
.073
.625
15.88
1.527
38.79
52,600-83,700
1.85
3/8
B
B
323177
323180
—
—
[26.7-42.4]
1/0
.073
.807
20.50
.625
15.88 38.58
1.519
1.925
48.90
83,700-119,500
1.85
3/8
[42.4-60.6]
Temperature Rating,
Material and Finish
Solistrand
Heat Resistant
Splices
Splice Body—Copper per
ASTM B152
Plating — Nickel per QQ-N-290,
650°F [343°C]
Style-A
Non-Insulation
Support
Style-B
Non-Insulation
Support
Style-C
Non-Insulation
Support
Butt Splice
Parallel Splice
Butt Splice
Related Product Data
Application Tooling— pages 17-21
Dimensions
Part Numbers
Wire Size
Circular Mils
[mm2]
Material
Thickness
Max.
Style
L
Max.
ID
Min.
OD
Max.
Loose
Piece
.578
.061
.141
A
B
C
A
B
C
A
B
C
323796
323030
322822
323795
323794
322824
323755
323754
323756
14.68
1.55
3.58
22-16
509-3,260
[0.26-1.65]
.033
0.84
.301
7.65
.061
1.55
.141
3.58
.591
15.01
.061
1.55
.141
3.58
.567
14.40
.085
2.16
.165
4.19
16-14
2,050-5,180
[1.04-2.62]
.033
0.84
.301
7.65
.085
2.16
.165
4.19
.529
13.44
.085
2.16
.165
4.19
.565
14.35
.129
3.28
.226
5.74
12-10
5,180-13,100
[2.62-6.64]
.042
1.07
.333
8.46
.129
3.28
.226
5.74
.703
17.86
.129
3.28
.226
5.74
8
.051
1.30
.375
9.53
.172
4.37
.296
7.52
13,100-20,800
[6.64-10.5]
B
2-34318-1
10
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices (Continued)
Temperature Rating
and Material
Related Product Data
Solistrand
High Temperature
Ring Tongue Terminals
Application Tooling— pages 17-21
Terminal Body— Nickel per
ASTM B162, 1200°F [649°C]
Non-Insulation Support
Tongue
Material
Dimensions
Part Numbers
Wire Size
Circular Mils
[mm2]
Color
Stud
Size
W
C
E
Max.
L
Max.
Loose
Piece
Tape
Mounted
Thickness Code
Max.
Min.
.218
.156
.337
.449
4
321884 2-321884-2
321885
321889* 2-321889-3
5.54
3.96
8.56
11.40
5
M3
.218
5.54
.156
3.96
.337
8.56
.449
11.40
—
.281
7.14
.250
6.35
.431
10.95
.574
14.58
6
M3.5
.312
7.92
.281
7.14
.462
11.73
.621
15.77
322872
321890*
321895
321891*
—
—
—
—
22-16
509-3,260
[0.26-1.65]
.033
Orange
0.84
.281
7.14
.250
6.35
.431
10.95
.574
14.58
8
M4
.312
7.92
.281
7.14
.462
11.73
.621
15.77
.281
7.14
.250
6.35
.431
10.95
.574
14.58
10
4
.312
7.92
.281
7.14
.462
11.73
.621
15.77
321896 2-321896-4
322328
.250
6.35
.171
4.34
.352
8.94
.480
12.19
—
.250
.171
.352
.480
322329 2-322329-2
322333 2-322333-3
6.35
4.34
8.94
12.19
6
M3.5
.343
8.71
.281
7.14
.462
11.73
.636
16.15
8
.343
.281
.462
.636
322334*
—
16-14
2,050-5,180
[1.04-2.62]
M4
8.71
7.14
11.73
16.15
.033
Orange
0.84
.343
8.71
.281
7.14
.462
11.73
.636
16.15
10
322335* 2-322335-5
1/4
M6
.468
.437
.618
.855
322339
322340
322343
323059
323745*
—
—
—
—
—
11.89
11.10 15.70
21.72
5/16
M8
.468
11.89
.437
11.10 15.70
.618
.855
21.72
.531
13.49
.546 .727
13.87 18.47
.995
25.27
3/8
6
M3.5
.375
9.53
.281
7.14
.549
13.94
.739
18.77
8
M4
.375
9.53
.281
7.14
.549
13.94
.739
18.77
.375
.281
.549
.739
10
323680* 2-323680-5
323683* 2-323683-2
12-10
5,180-13,100
[2.62-6.64]
9.53
7.14
13.94
18.77
.042
Orange
1.07
1/4
M6
.531
13.49
.468
11.89 18.69
.736
1.004
25.50
5/16
M8
.531
.468
.736
1.004
323746
323747
—
—
13.49
11.89 18.69
25.50
.593
15.06
.531 .799
13.49 20.29
1.098
27.89
3/8
8
.051
.406
10.31
.359
9.12
.743
18.87
.949
24.10
13,100-20,800
[6.64-10.5]
Orange
1.30
10
328822
—
*Available in small packaging quantities.
11
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices (Continued)
Temperature Rating
and Material
Related Product Data
Solistrand
High Temperature
Spade Tongue Terminals
Application Tooling— pages 17-21
Terminal Body— Nickel per
ASTM B162, 1200°F [649°C]
Non-Insulation Support
Tongue
Dimensions
Wire Size
Circular Mils
[mm2]
Part Number
Material
Thickness
Max.
Color
Code
Stud
Size
W
C
E
L
X
Loose Piece
Min. Max. Max.
16-14
2,050-5,180
[1.04-2.62]
.033
0.84
8
M4
.385 .312 .493
.685 .187
Orange
323905
9.78 7.92 12.52 17.40 4.75
Temperature Rating
and Material
Solistrand
High Temperature
Splices
Splice Body—Nickel per
ASTM B162, 1200°F [649°C]
Style-A
Non-Insulation
Support
Style-B
Non-Insulation
Support
Style-C
Non-Insulation
Support
Related Product Data
Application Tooling— pages 17-21
Butt Splice
Parallel Splice
Butt Splice
Dimensions
Part Numbers
Wire Size
Circular Mils
[mm2]
Material
Thickness
Max.
Color
Code
Style
L
Max.
ID
Min.
OD
Max.
Loose
Piece
.578
.061
.141
A
B
C
A
B
C
A
B
C
322324*
322326
323876
322345
322347
323878
323696*
323672
323698
14.68
1.55
3.58
22-16
509-3,260
[0.26-1.65]
.033
0.84
.301
7.65
.061
1.55
.141
3.58
Orange
Orange
Orange
.529
13.44
.061
1.55
.141
3.58
.567
14.40
.085
2.16
.165
4.19
16-14
2,050-5,180
[1.04-2.62]
.033
0.84
.301
7.65
.085
2.16
.165
4.19
.529
13.44
.085
2.16
.165
4.19
.567
14.40
.129
3.28
.226
5.74
12-10
5,180-13,100
[2.62-6.64]
.042
1.07
.333
8.46
.129
3.28
.226
5.74
.703
17.86
.129
3.28
.226
5.74
*Available in small packaging quantities.
12
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices (Continued)
Temperature Rating,
Material and Finish
Related Product Data
Diamond Grip
Heat Resistant
Application Tooling— pages 17-21
Terminal Body— Copper per
ASTM B152
Ring Tongue Terminals
Plating — Nickel per QQ-N-290,
650°F [343°C]
Metallic Sleeve— Nickel Silver per
ASTM B122
Insulation Support
Tongue
Dimensions
Wire
Part Numbers
Wire Size
Material
Thickness
Max.
Stud
Size
Insulation
Circular Mils
W
C
Min.
E
Max.
L
Max.
Loose
Piece
Tape
Mounted
Diameter
Max.
[mm2]
.218
.156
.512
.624
.140
4
322363
322364
323151
323199
322365
—
—
—
—
5.54
3.96
13.00 15.85
3.56
.218
5.54
.156
3.96
.512
13.00 15.85
.624
.140
3.56
6
M3.5
.218
5.54
.156
3.96
.530 .645
13.46 16.38
.611 .749
15.52 19.02
.611 .749
15.52 19.02
.629 .770
15.98 19.56
.611 .749
15.52 19.02
.629 .770
15.98 19.56
.793 1.031
20.14 26.19
.810 1.051
20.57 26.70
.527 .655
13.39 16.64
.637 .811
16.18 20.60
.549 .680
13.94 17.27
.637 .811
16.18 20.60
.659 .836
16.74 21.23
.637 .811
16.18 20.60
.659 .836
16.74 21.23
.793 1.030
20.14 26.16
.815 1.055
20.70 26.80
.841 1.034
21.36 26.26
.841 1.034
21.36 26.26
.841 1.034
21.36 26.26
.110
2.79
.281
7.14
.250
6.35
.140
3.56
.281
7.14
.250
6.35
.140
3.56
22-16
509-3,260
[0.26-1.65]
—
.033
0.84
8
M4
.281
7.14
.250
6.35
.110
2.79
323152 323152-1
.281
7.14
.250
6.35
.140
3.56
322366
323153
322367
323154
322371
322373
323158
322374
323160
322375
323161
322376
323162
323066
323067
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
10
.281
7.14
.250
6.35
.110
2.79
.469
11.91 11.10
.437
.140
3.56
1/4
M6
.469
11.91 11.10
.437
.110
2.79
.250
6.35
.171
4.34
.170
4.32
4
.343
8.71
.281
7.14
.170
4.32
6
M3.5
.250
6.35
.171
4.34
.130
3.30
.343
8.71
.281
7.14
.170
4.32
8
M4
16-14
2,050-5,180
[1.04-2.62]
.033
0.84
.343
8.71
.281
7.14
.130
3.30
.343
8.71
.281
7.14
.170
4.32
10
.343
8.71
.281
7.14
.130
3.30
.469
11.91 11.10
.437
.170
4.32
1/4
M6
.469
11.91 11.10
.437
.130
3.30
6
M3.5
.375
9.53
.302
7.67
.230
5.84
8
M4
.375
9.53
.302
7.67
.230
5.84
12-10
5,180-13,100
[2.62-6.64]
.042
1.07
.375
9.53
.302
7.67
.230
5.84
323068 323068-1
10
.375
9.53
.302
7.67
.840
21.34 26.16
1.030
.250
6.35
325154
323069
—
—
1/4
M6
.531
13.49 11.89
.468
1.002 1.273
25.45 32.33
.230
5.84
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
13
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices (Continued)
Temperature Rating,
Material and Finish
Related Product Data
Diamond Grip
Heat Resistant
Splices
Application Tooling— pages 17-21
Splice Body—Copper per
ASTM B152
Insulation
Support
Butt Splice
Plating — Nickel per QQ-N-290,
650°F [343°C]
Metallic Sleeve— Nickel Silver per
ASTM B122
Wire
Dimension
Part Numbers
Wire Size
Material
Thickness
Max.
Insulation
Circular Mils
L
Max.
Loose
Piece
Diameter
Max.
[mm2]
22-16
509-3,260
[0.26-1.65]
.033
0.84
.889
22.58
.140
3.56
322823
322825
323757
16-14
.033
0.84
.889
.170
2,050-5,180
[1.04-2.62]
22.58
4.32
12-10
5,180-13,100
[2.62-6.64]
.042
1.07
1.261
32.03
.230
5.84
Temperature Rating and
Material
Related Product Data
Diamond Grip
High Temperature
Ring Tongue Terminals
Application Tooling— pages 17-21
Terminal Body— See table, 1200°F
[649°C], Nickel per ASTM B162,
Alumel —, Chromel —
Metallic Sleeve— Nickel Silver per
ASTM B122
Insulation Support
Tongue
Wire
Dimensions
Part Numbers
Sleeve
Wire Size
Circular Mils
[mm2]
Material
Thickness
Max.
Stud
Size
Body
Insulation
Color
C
Min.
E
Max.
L
Loose
Piece
Tape
Mounted
Material
Diameter
Max.
W
Code
Orange
Orange
Orange
Gray
Max.
.218
5.54
.156
3.96
.512
13.00
.624
15.85
.140
3.56
4
Nickel
Nickel
321887
321892
—
—
—
—
—
—
—
—
—
—
—
—
—
—
.281
7.14
.250
6.35
.611
15.52
.749
19.02
.140
3.56
6
M3.5
.312
7.92
.281
7.14
.637
16.18
.796
20.22
.140
3.56
Nickel
322873
.312
7.92
.281
7.14
.637
16.18
.796
20.22
.140
3.56
Chromel
Nickel
2-322873-1
321893
.281
7.14
.250
6.35
.611
15.52
.749
19.02
.140
3.56
Orange
Orange
Gray
.312
7.92
.281
7.14
.637
16.18
.796
20.22
.140
3.56
Nickel
321897
8
M4
.312
7.92
.281
7.14
.637
16.18
.796
20.22
.140
3.56
Chromel
Alumel
Nickel
1-321897-0
1-321897-3
184204-1
321894
22-16
509-3,260
[0.26-1.65]
.033
0.84
.312
7.92
.281
7.14
.637
16.18
.796
20.22
.140
3.56
Green
Orange
Orange
Orange
Gray
.468
11.89
.437
11.10
.793
20.14
1.031
26.19
.140
3.56
.281
7.14
.250
6.35
.611
15.52
.749
19.02
.140
3.56
Nickel
.312
7.92
.281
7.14
.637
16.18
.796
20.22
.140
3.56
10
Nickel
321898
.312
7.92
.281
7.14
.637
16.18
.796
20.22
.140
3.56
Chromel
Alumel
Nickel
1-321897-4
1-321898-0
322320
.312
7.92
.281
7.14
.637
16.18
.796
20.22
.140
3.56
Green
Orange
1/4
M6
.468
11.89
.437
11.10
.793
20.14
1.031
26.19
.140
3.56
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
14
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices (Continued)
Diamond Grip
High Temperature
Ring Tongue Terminals
(Continued)
Tongue
Wire
Insulation
Diameter
Max
Dimensions
Part Numbers
Wire Size
Circular Mils
[mm2]
Sleeve
Color
Code
Material
Thickness
Max.
Stud
Size
Body
Material
C
E
Max.
L
Max.
Loose
Tape
Mounted
W
Min.
Piece
.250
.171
.527
.655
.170
Nickel
Nickel
Orange
Orange
Orange
Gray
322332
—
6.35
4.34
13.39
16.64
4.32
6
M3.5
.343
8.71
.281
7.14
.637
16.18
.811
20.60
.170
4.32
322336 2-322336-2
322337 1-322337-2
.343
8.71
.281
7.14
.637
16.18
.811
20.60
.170
4.32
Nickel
8
M4
.343
8.71
.281
7.14
.637
16.18
.811
20.60
.170
4.32
Chromel
Alumel
Nickel
1-322337-0
1-322338-1
—
—
.343
8.71
.281
7.14
.637
16.18
.811
20.60
.170
4.32
Green
Orange
Gray
16-14
2,050-5,180
[1.04-2.62]
.033
0.84
.343
8.71
.281
7.14
.637
16.18
.811
20.60
.170
4.32
322338 1-322338-2
.343
8.71
.281
7.14
.637
16.18
.811
20.60
.170
4.32
10
Chromel
Alumel
Nickel
1-322337-1
1-322338-0
322341
—
—
—
—
—
—
—
.343
8.71
.281
7.14
.637
16.18
.811
20.60
.170
4.32
Green
Orange
Orange
Orange
Orange
Gray
1/4
M6
.468
11.89
.437
11.10
.793
20.14
1.030
26.16
.170
4.32
.531
13.49
.546
13.87
.902
22.91
1.170
29.72
.170
4.32
3/8
Nickel
322344
6
M3.5
.375
9.53
.281
7.14
.815
20.70
1.008
25.60
.230
5.84
Nickel
323748
.375
9.53
.281
7.14
.815
20.70
1.008
25.60
.230
5.84
Nickel
323749
8
M4
.375
9.53
.281
7.14
.815
20.70
1.008
25.60
.230
5.84
Chromel
Nickel
2-323749-1
12-10
5,180-13,100
[2.62-6.64]
.042
1.07
.375
9.53
.281
7.14
.815
20.70
1.008
25.60
.230
5.84
Orange
Green
Orange
Orange
323750 2-323750-5
10
.375
9.53
.281
7.14
.815
20.70
1.008
25.60
.230
5.84
Alumel
Nickel
2-323750-1
323751
—
—
—
1/4
M6
.531
13.49
.468
11.89
1.002
25.45
1.273
32.33
.230
5.84
5/16
M8
.531
13.49
.468
11.89
1.002
25.45
1.273
32.33
.230
5.84
Nickel
323752
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
15
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices (Continued)
Temperature Rating
and Material
Related Product Data
Diamond Grip
High Temperature
Splices
Application Tooling— pages 17-21
Splice Body—See table, 1200°F
[649°C], Nickel per ASTM B162,
Insulation
Support
Alumel —, Chromel —
Butt Splice
Metallic Sleeve— Nickel Silver per
ASTM B122
Wire
Dimension
Part Numbers
Wire Size
Circular Mils
[mm2]
Splice
Body
Material
Sleeve
Color
Code
Material
Thickness
Max.
Insulation
L
Max.
Loose
Piece
Diameter
Max.
.889
.140
Nickel
Alumel
Chromel
Nickel
Orange
Green
Gray
322325
22.58
3.56
22-16
509-3,260
[0.26-1.65]
.033
0.84
.889
22.58
.140
3.56
1-322325-0
1-322325-1
322346
.889
22.58
.140
3.56
.889
22.58
.170
4.32
Orange
Green
Gray
16-14
2,050-5,180
[1.04-2.62]
.033
0.84
.889
22.58
.170
4.32
Alumel
Chromel
1-322346-0
1-322346-1
.889
22.58
.170
4.32
12-10
5,180-13,100
[2.62-6.64]
.042
1.07
1.261
32.03
.230
5.84
Nickel
Orange
323699
16
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Application Tooling Information for STRATO-THERM Insulated Heat
Resistant and High Temperature Terminals and Splices
Wire Size Range
AWG 26-10
Pneumatic
Tooling
Tooling For
Tape Mounted Products
Dies for 69875
AMP
Wire
Size
Dies for 626 Pneumatic Tools
189721-[ ] and 189722-[ ]
AMP-TAPETRONIC
Product
Type
Hand
Tools
require Straight Action Adapter1
AMP-O-LECTRIC2
Requires Applicator
AMPOMATOR CLS IV2
Requires Applicators
217200-1 or “C” Head Adapter 318161-1
Dies also fit 69710-1 Hand Tool
26-24
22-20
18-16
14
69731
69732
69733
69734
69735
69327
69328
69329
—
69936
69937
—
69692-1
69693-1
Pre-Insulated
Terminals
12-10
22-20
18-16
14-12
—
—
—
—
—
—
Pre-Insulated
Splices
—
—
1Straight Action Adapter 217200-1 is used with Tools 189721-1 or 189722-1. “C”Head Adapter 318161-1 is used with
Tools 189721-2 or 189722-2. Both adapters require the use of non-ratchet tool holder 189928-1 or ratchet tool holder
356304-1.
2Call Tooling Assistance Center for Machine and Applicator part numbers.
Wire Size Range
AWG 26-6
Hydraulic and Battery Powered
Tools With Interchangeable Dies
AMP
Product
Type
Hand
Tools
Wire
Size
690972
690992
“C”
“C” Head
Head
Nest
Indent
—
26-24
22-20
18-16
8
45730
46467, 464681
—
—
—
—
—
Post Insulated
Terminals
and Splices
46468
—
—
—
—
46146
46134
46145
46133
69216
69217
6
—
1Part Number 55235-1 only
2These crimping heads are recommended for use only with AMP Hydraulic Hand Pump 314979-1, DYNA-CRIMP
Hydraulic Power Units 69120-1 (115 VAC) and 69120-2 (230 VAC), and with DYNA-CRIMP II Battery Operated
Hydraulic Power Unit 122271-1. See pages 20 & 21.
17
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Application Tooling Information for STRATO-THERM Uninsulated Heat
Resistant and High Temperature Terminals and Splices
Wire Size Range
AWG 22-10
Pneumatic
Tooling
Tooling For
Tape Mounted Products
Dies for 69875
AMP
Wire
Size
AMP-TAPETRONIC
Product
Type
Hand
Tools
Crimping Heads for
626 Pneumatic Tool
189721-1 and 189722-11
AMP-O-LECTRIC2
Requires Applicator
AMPOMATOR CLS IV2
Requires Applicators
46673
Uninsulated
Terminals
and Splices
with Insulation
Support
22-16
356744-1
69930
46673-1
46988
59294
16-14
12-10
22-16
356744-2
904870-1
69931
69932
69954
59461
Uninsulated
Terminals
and Splices
16-14
12-10
46447
217206-1
69955
69956
with Non-Insulation
Support
1Crimping Heads require the use of non-ratchet tool holder 189767-1 or ratchet tool holder 356302-1.
2Call Tooling Assistance Center for Machine and Applicator part numbers.
Wire Size Range
AWG 8-1/0
Pneumatic
Tooling
Hydraulic Tools WIth
Self Contained Dies
Hydraulic and Battery Powered
Tools with Interchangeable Dies
Product
Type
AMP
Wire
Size
Hand
Tools
59973-1 Hand Tool,
690652 & 690672
Latch Heads
690992
“C”
Head
69015
Head
690972
Hand
Tool
Latch
Head
“C” Head
Nest
Indent
Nest
Indent
8
6
693551
49956
48172
48126
48355
—
—
69216
69217
59083
No CERTI-
CRIMP
Uninsulated
Terminals
and Splices
with
Non-Insulation
Support
48128
—
—
59975-1
690692
48127
48131
4
2
—
—
—
48173
48174
48183
48129
48130
48132
46135
46136
46138
69218
45433
45436
46133
46137
1/0
—
—
1CERTI-CRIMPHand Tool.
2These crimping heads are recommended for use only with AMP Hydraulic Hand Pump 314979-1, DYNA-CRIMP Hydraulic Power Units 69120-1 (115 VAC)
and 69120-2 (230 VAC), and with DYNA-CRIMP II Battery Operated Hydraulic Power Unit 122271-1. See Pages 20 & 21.
For additional tooling information, call 1-800-722-1111.
18
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Application Tooling Information for STRATO-THERM Heat Resistant and
High Temperature Terminals and Splices
Loose Form Terminal
and Splice Tooling
CERTI-CRIMP Hand Tools
Double Action
Hand Tool
Heavy Head Hand Tool
Part No. 69355
Straight Action Double
Action Hand Tool
“C” Head Straight
Action Hand Tool
Part No. 69710-1
T-Head Tool
Pneumatic Tools
Part No. 69015
6-26 Pneumatic Tool
Part No. 189721-1
Hydraulic Hand Tools
Part No. 59975-1
(Self Contained Dies)
Part No. 59973-1
(Dies Required)
For additional tooling information, call 1-800-722-1111.
19
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Application Tooling Information for STRATO-THERM Heat Resistant and
High Temperature Terminals and Splices (Continued)
Tape Mounted
AMP-TAPETRONIC Machine
69875, 68250-1
AMP-O-LECTRIC, Model “G” Machine
AMPOMATOR CLS IV Machine 217500-1
(Requires Applicator and Dies)
(Requires Applicators and Dies)
(Requires Dies)
Latch Heads and Dies
Part No.
69065
Part No.
69067
Part No.
69099
Part No. 69069
(Self Contained Dies)
Part No.
69097
For additional tooling information, call 1-800-722-1111.
20
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Application Tooling Information for STRATO-THERM Heat Resistant and
High Temperature Terminals and Splices
DYNA-CRIMP II
Battery Operated
Hydraulic Power Unit
Hand Operated Power Unit
DYNA-CRIMP Electric
Hydraulic Power Unit
Typical interchangable hose,
head and dies not included
Part No. 122271-14
314979-12 (Hose, head and dies not included)
Power Unit Only
(Includes Pressure Release)
115 Volts (60 Hz) — 69120-13
230 Volts (60 Hz) — 69120-23
Refer to the table below for accessories.
AMP application tools are designed to
produce a carefully controlled uniform
pressure crimp, regardless of how they
are powered. All tools shown are
specially designed for AMP products
and are precision machined from hard
tool steel.
Handle
Control
Hose
Assembly
Foot
Control
Multidirectional
Valve
Power Units Accessories
For Use With
Power Unit No.
Accessory
Part No.
Accessory Description
Remarks
7' Handle Control Assembly—Hose & Cord
15' Handle Control Assembly—Hose & Cord
21' Handle Control Assembly—Hose & Cord
28' Handle Control Assembly—Hose & Cord
59907-7
1-59907-5
2-59907-1
2-59907-8
15' Foot Switch Assembly
68284-1
Need Hose Assembly
369120-13
369120-23
314979-12
122271-14
3' Hose Assembly
7' Hose Assembly
15' Hose Assembly
21' Hose Assembly
59909-3
59909-7
1-59909-5
2-59909-1
68284-1 Foot Switch
Assembly needed with
these Hose Assemblies
and 69120
2' Hose Assembly (1/4" I.D.)
3' Hose Assembly (1/4" I.D.)
7' Hose Assembly (1/4" I.D.)
15' Hose Assembly (1/4" I.D.)
314990-1
314990-2
314990-3
314990-4
More Flexible, Lighter Weight.
Recommended for use with
DYNA-CRIMP II Battery
Operated Hydraulic Power Unit
69120-13
69120-23
3-Way Multi-Directional Valve
3-Way Multi-Directional Valve (Elec.Ctl.)
592201
For use with
Foot Switch only
59220-21
1 Contact AMP Incorporated for usage recommendations.
2 Also see AMP Customer Manual 409-5860.
3 Also see AMP Customer Manual 409-1950.
4 Also see AMP Customer Manual 409-5869.
Note: All Hoses and Handle Control Assemblies have a 3/8" high flow male coupler (311470-1) on each end.
All Power Units and Heads have a 3/8" high flow female coupler (311471-1).
For additional tooling information, call 1-800-722-1111.
21
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Part Number Index
Note: This index lists all cataloged parts by
base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
Part No.
34318
Page
10
5
Part No.
322367
322371
322373
322374
322375
322376
322693
322694
322695
322733
322797
322798
322799
322805
322822
322823
322824
322825
322872
322873
323030
323059
323060
323061
323062
323063
323064
323065
323066
323067
323068
323069
323151
323152
323153
323154
323158
323160
323161
323162
323165
323166
323167
323168
323169
323170
323171
323172
323173
323174
323175
323177
323180
323199
323219
323672
323680
323683
323696
323698
323699
Page
13
13
13
13
13
13
9
Part No.
323745
323746
323747
323748
323749
323750
323751
323752
323754
323755
323756
323757
323794
323795
323796
323876
323878
323905
324061
324370
325154
326760
326835
328822
328854
328855
328856
328857
328858
328859
328860
328861
329580
329583
329647
329716
330377
330378
330379
332433
332434
332438
332439
332446
332453
332454
Page
11
11
11
15
15
15
15
15
10
10
10
14
10
10
10
12
12
12
9
50829
50830
5
50831
5
50832
5
50834
5
50835
5
50836
5
9
50837
5
9
50838
5
9
50839
5
9
50840
5
9
50841
5
9
50844
6
9
50845
6
10
14
10
14
11
14
10
11
9
50846
6
50847
6
50848
6
53572
6
53587
6
8
55114
6
13
8
55235
8
184204
321884
321885
321887
321889
321890
321891
321892
321893
321894
321895
321896
321897
321898
322320
322324
322325
322326
322328
322329
322332
322333
322334
322335
322336
322337
322338
322339
322340
322341
322343
322344
322345
322346
322347
322363
322364
322365
322366
14
11
11
14
11
11
11
14
14
14
11
11
14
14
14
12
16
12
11
11
15
11
11
11
15
15
15
11
11
15
11
15
12
16
12
13
13
13
13
8
9
11
7
9
9
7
9
7
9
7
13
13
13
13
13
13
13
13
13
13
13
13
9
7
7
7
7
8
8
8
8
7
7
7
5
5
9
5
9
5
9
6
9
5
9
5
9
9
10
10
10
10
10
13
9
12
11
11
12
12
16
22
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
STRATO-THERM
Terminals & Splices for High Temperature Applications
Catalog 82011
Revised 3-98
Engineering Notes
23
AMP Incorporated, Harrisburg, PA 17105; Phone: 717-564-0100; FAX: 717-986-7575
Product Information Center; Phone: 1-800-522-6752
www.amp.com
AMP Business Centers, Worldwide
Americas
Related Businesses
Argentina – Buenos Aires
Phone: + 54-1-733-2000
Fax: + 54-1-717-0988
AMP Circuits Division
Greenville, SC, USA
Chile – Santiago
United States – Harrisburg, PA
Phone: + 1-717-564-0100
Fax: + 1-717-986-7575
Phone: + 56-2-236-4267
Fax: + 56-2-235-0061
Phone: + 1-864-297-4100
Fax: + 1-864-675-7099
Brazil – Sao Paulo
Phone: + 55-11-861-1311
Fax: + 55-11-861-0397
Columbia – Bogata
Phone: + 57-1-369-0045
Fax: + 57-1-269-7525
AMP Circuits and Packaging,
EMEA
For Latin/South American
Countries not shown
Phone: +54-1-733-2015
Fax: +54-1-733-2083
Dublin, Ireland
Canada – Toronto
Phone: + 1-905-475-6222
Fax: + 1-905-474-5520
Mexico – Mexico City
Phone: + 52-5-398-76-11
Fax: + 52-5-398-79-64
Phone: + 353-1-820-6500
Fax: + 353-1-820-6501
AMP Packaging and
Carroll Touch Systems Division
Round Rock TX, USA
Phone: + 1-512-244-5100
Fax: + 1-512-244-7040
Asia/Pacific
AMP-Simel S.A.
Gevrey-Chambertin, France
Phone: + 33-3-8058-3200
Fax: + 33-3-8034-1015
Australia – Sidney
Phone: + 61-2-9840-8200
Fax: + 61-2-9899-5649
Malaysia – Kuala Lampur
Phone: + 603-705-3055
Fax: + 603-705-3066
Philippines – Manila
Phone: + 632-811-0437
Fax: + 632-811-0441
India – Bangalore
New Zealand – Auckland
Phone: + 64-9-634-4580
Fax: 64-9-634-4586
Singapore – Singapore
Phone: + 65-482-0311
Fax: + 65-482-1012
ARA-Applied Robotics Division
Rousset, France
Phone: + 91-80-845-3014
Fax: + 91-80-845-3038
Phone: + 33-4-42-29-1200
Fax: + 33-4-42-29-1212
Indonesia – Jakarta
Phone: + 6221-526-7852
Fax: + 6221-526-7856
Peoples Republic of China
Hong Kong
Phone: + 852-2-35-1628
Fax: + 852-2-35-0243
Shangha
Phone: + 86-21-6485-0602
Fax: + 86-21-6485-0728
Shunde
Phone: + 86-765-7751368
Fax: + 86-765-7752823
Taiwan – Taipei
Phone: + 886-2-704-4815
Fax: + 886-2-704-4940
Carroll Touch International, Ltd.
Tokyo, Japan
Phone: + 81-03-5306-2100
Fax: + 81-03-5306-2105
Japan – Tokyo
Phone: + 81-44-844-8111
Fax: + 81-44-812-3207
Thailand – Bangkok
Phone: + 91-662-513-9888
Fax: + 91-662-513-9889
DSM Decolletage S.A.
Saint-Maurice
Korea – Seoul
Phone: + 82-3274-0535
Fax: + 82-3274-0524
Vietnam – Ho Chi Minh City
Phone: + 84-8823-2546
Fax: + 84-8823-1443
Phone: + 41-24-486-2486
Fax: + 41-24-486-2400
Fibernet Division
Rowville, Australia
Phone: + 61-3-9764-2111
Fax: + 61-3-9764-2120
Wellington, New Zealand
Phone: + 64-4-237-9195
Fax: + 64-4-237-9195
Europe/Middle East/Africa
Great Britain – London
Phone: + 44-181-954-2356
Fax: + 44-181-954-6234
Austria – Vienna
Inside: Phone: + 0222-277-97-0
Fax: + 0222-270-26-61
Outside: Phone: + 43-1-277-97-0
Fax: + 43-1-270-26-61
Romania – Bucharest
HTS Elektrotechnik GmbH
Neunkirchen, Germany
Phone: + 49-2247-305-0
Fax: + 49-2247-305-22
Phone: + 40-1-311-3479/3596
Fax: + 40-1-312-0574
Greece – Athens
Phone: + 30-1-902-5515
Fax: + 30-1-902-4237
Russia
Moscow
M/A-COM Division
Americas
Phone: + 7-095-926-5506/07/08/09
Fax: + 7-095-926-5505
Belgium – Brussels
Phone: + 32-2-719-2511
Fax: + 32-2-725-4928
Holland – ’s-Hertogenbosch
Phone: + 31-73-624-6246
Fax: + 31-73-621-2365
Lowell, MA, USA
St. Petersburg
Phone: + 7-812-325-3083
Fax: + 7-812-326-3288
Phone: + 1- 978-442-5000
Fax: + 1-978-442-5354
Bulgaria – Sofia
Phone: + 359-2-971-2152
Fax: + 395-2-971-2153
Europe/Middle East/Africa
Bracknell, England
Phone: + 44-1344-869-595
Fax: + 44-1344-300-020
Asia/Pacific
Hong Kong
Phone: + 85-2-2111-8088
Fax: + 85-2-2111-8087
Hungary – Budapest
Phone: + 36-1-344-2633
Fax: + 36-1-344-2634
Slovakia – Bystrica
Phone: + 421-88-761-120/121
Fax: + 421-88-761-122
Croatia – Zagreb
Phone: + 385-1-67-04-46
Fax: + 385-1-69-16-04
Ireland – Dublin
Phone: + 353-1-820-3000
Fax: + 353-1-820-9790
Slovenia – Ljubljana
Phone: + 386-61-161-3270
Fax: + 386-61-161-3240
Czech Republic – Kurim
Phone: + 420-5-41-162-111
Fax: + 420-5-41-162-223
Israel – Tel Aviv
Phone: + 972-3-645-07-07
Fax: + 972-3-649-24-13
Madison Cable Corporation
Worcester, MA, USA
Phone: + 1-508-752-7320
Fax: + 1-508-752-4230
South Africa – Johannesburg
Phone: + 27-11-805-65-35
Fax: + 27-11-805-65-40
Denmark – Viby
Phone: + 45-86-295-055
Fax: + 45-86-295-133
Italy – Torino
Phone: + 39-11-4012-111
Fax: + 39-11-4031-116
Spain – Barcelona
Phone: + 34-3-291-0330
Fax: + 34-3-201-7879
Madison Cable Ltd.
Egypt – Cairo
Phone: + 202-417-76-47
Fax: + 202-419-23-34
Dundee, Scotland
Lithuania – Vilnius
Phone: + 370-2-231402
Fax: + 370-2-231403
Phone: + 44-1382-508080
Fax: + 44-1382-505060
Sweden – Stockholm
Phone: + 46-8-580-833-00
Fax: + 46-8-580-194-70
Estonia – Tallinn
Phone: + 372-6205-800
Fax: + 372-6205-804
Precision Interconnect Division
Portland, OR, USA
Phone: + 1-503-620-9400
Fax: + 1-503-620-7131
Norway – Oslo
Phone: + 47-66-77-88-50
Fax: + 47-66-77-88-55
Switzerland – Steinach
Phone: + 41-71-447-0447
Fax: + 41-71-447-0444
Finland – Helsinki
Phone: + 358-9-512-3420
Fax: + 358-9-512-34250
Poland – Warsaw
Phone: + 48-22-672-47-90/91/92
Fax: + 48-22-672-47-88
Turkey – Istanbul
Phone: + 90-212-281-8181
Fax: + 90-212-281-8184
France – Pontoise
Phone: + 33-1-34-20-88-88
Fax: + 33-1-34-20-86-00
Portugal – Lisbon
Phone: + 351-1-387-70-16
Fax: + 351-1-387-71-72
For Middle East/African
Countries not shown
Phone: +33-1-34-20-83-83
7F1a7x-5:6+43-031-10-03.4C-2a0na-8d6a-09905-470-4425.
Germany – Langen
Phone: + 49-6103-709-0
Fax: + 49-6103-709-223
AMP Incorporated, Harrisburg, PA 17105-3608. Contact your regional center: USA
United Kingdom 44-1753- 676800. Singapore 65-482-0311. Japan 81-44-813-8502. On the internet at http://www.amp.com
82011—1.5M—AG—AMP—3-98—1405
AMP and Connecting at a Higher Level are trademarks.
Rev. 1, 10/97
Printed in USA
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明