AMER54-30180KZ-C1 [AIMTEC]
up to2000mA | AC-DC LED driver; 达to2000mA | AC- DC LED驱动器
| 型号： | AMER54-30180KZ-C1 |
| 厂家： | 
AIMTEC |
| 描述： | up to2000mA | AC-DC LED driver |
| 文件： | 总2页 (文件大小：246K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Series AMER45/54/60-KZ
up to2000mA | AC-DC LED driver
FEATURES:
• AC-DC Constant Current LED Driver
• Universal Input: 90-264VAC, 47-63Hz
• Short circuit protection
•
•
•
•
Waterproof IP67
Over current protection
Over voltage protection
Power Factor Correction
• RoHS compliant
Models
Single output
Max Output
Power (W) *
45.0
Output Voltage
Range (V)
15-30
Output Current
(mA)
Input Voltage
(VAC/Hz)
90-264/ 47-63
90-264/ 47-63
90-264/ 47-63
Efficiency
Model
(%)
85
85
AMER45-30150KZ-C1
AMER54-30180KZ-C1
AMER60-30200KZ-C1
1375 ± 125
1725 ± 75
1925 ± 75
54.0
60.0
15-30
15-30
85
* Exceeding the maximum output power will permanently damage the converter
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Input Specifications
Parameters
Conditions
Typical
90-264VAC
20
Maximum
Units
VAC
Voltage range
115V
230V
230V
115V
230V
Inrush current <2ms
Leakage current
AC current
A
mA
A
30
0.25
0.4
0.25
No-load consumption
External fuse
2.5
W
250V/1.5A
Power Factor
0.95
Output Specifications
Parameters
Current accuracy
Line regulation
Conditions
Typical
±10
±5
Maximum
Units
%
%
LL-HL
Load regulation
Ripple & Noise
Hold-up time (min)
0% to 100% load
20MHz Bandwidth
100% load
±10
150
4
%
mV p-p
ms
8
Isolation Specifications
Parameters
Tested I/O voltage
Input FG
Conditions
5mA/60Sec
Typical
3000
1500
Maximum
Units
VAC
VAC
MΩ
3750
Isolation resistance
>50
General Specifications
Parameters
Switching frequency
Over current protection
Over voltage protection
Short circuit protection
Operating temperature *
Maximum case temperature
Storage temperature
Conditions
Typical
100
115
Zener Diode clamp
Continuous, Auto recovery
-30 to +55
Maximum
Units
KHz
%
oC
oC
oC
90
-40 to +80
www.aimtec.com
F 052.1e R1.C
Tel: +1 514 620 2722
1 of 2
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMER45/54/60-KZ
up to2000mA | AC-DC LED driver
General Specifications (continued)
Parameters
Temperature coefficient
Cooling
Conditions
Typical
0.05
Maximum
Units
% / oC
Free air convection
Humidity
95
% RH
Case material
Potting
Wires
Aluminum
White epoxy (IP67 rated)
UL1015 18AWG *20CM
750
Weight
g
Dimensions (L X H X W)
MTBF
5.90 x 2.68 x 1.97 inches 150.00 x 68.00 x 50.00 mm
50,000 hrs (MIL-HDBK-217 F at +25 oC)
* NOTE: Converters do not have Over Temperature Protection and will be damaged if their maximum case temperature is
exceeded.
Safety Specifications
Parameters
Agency approvals
CE
Standards
GB195110.1-2004/IEC61347-1:2003, EN55015, EN61000, EN61547
Dimensions
Top View
150.00
(5.90)
120.00
(4.72)
15.00
(0.59)
15.00
(0.59)
4.00
(0.16)
136.00
(5.35)
200.00
(8.00)
200.00
(8.00)
Input Wires are 18 AWG at 20cm
Output Wires are 18AWG at 20cm
Side View
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 052.1e R1.C
Tel: +1 514 620 2722
2 of 2
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
相关型号：
©2020 ICPDF网 联系我们和版权申明