A4053MSP8R [AITSEMI]
1A LINEAR LI-ION BATTERY CHARGER;型号: | A4053MSP8R |
厂家: | AiT Semiconductor |
描述: | 1A LINEAR LI-ION BATTERY CHARGER |
文件: | 总10页 (文件大小:427K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
A4053
BATTERY MANAGEMENT
AiT Semiconductor Inc.
www.ait-ic.com
1A LINEAR LI-ION BATTERY CHARGER
DESCRIPTION
FEATURES
The A4053 is a complete constant current & constant
voltage linear charger for single cell lithium-ion
batteries. Its P-MSOP package and low external
component count make the A4053 ideally suited for
portable applications. Furthermore, the A4053 is
specifically designed to work within USB power
specifications.
No external sense resistor is needed, and no blocking
diode is required due to the internal MOSFET
architecture. Thermal feedback regulates the charge
current to limit the die temperature during high power
operation or high ambient temperature. The charge
voltage is fixed at 4.2V, and the charge current can
be programmed externally with a single resistor. The
A4053 automatically terminates the charge cycle
when the charge current drops to 1/10th the
programmed value after the final float voltage is
reached.
When the input supply (wall adapter or USB supply)
is removed, the A4053 automatically enters a low
current state, dropping the battery drain current to
less than 2uA. The A4053 can be put into shutdown
mode, reducing the supply current to 50uA.
Other features include Battery temperature monitor,
under-voltage lockout, automatic recharge and two
status pins to indicate charge and charge termination.
Programmable Charge Current Up to 1000mA
No MOSFET, Sense Resistor or Blocking Diode
Required
Complete Linear Charger in MSOP Package for
single Cell Lithium-Ion Batteries
Constant-Current/Constant-Voltage Operation
with Thermal Regulation to Maximize Charge
Rate Without Risk of Overheating
Charges Single Cell Li-Ion Batteries Directly
from USB Port
Preset 4.2V Charge Voltage with ±1%
Accuracy
Charge Current Monitor Output for Gas Gauging
Automatic Recharge
Charge state pairs of output, no battery and fault
status display
C/10 Charge Termination
50uA Supply Current in Shutdown
2.9V Trickle Charge Threshold
Soft-Start Limits Inrush Current
Battery temperature monitoring function
Available in P-MSOP8 Package
APPLICATION
Cellular Telephones, PDAs, MP3 /MP4 Players
Charging Docks and Cradles
Bluetooth 、GPS Applications
The A4053 is available in P-MSOP8 Package
TYPICAL APPLICATION
ORDERING INFORMATION
Package Type
P-MSOP8
Part Number
A4053MSP8R
A4053MSP8VR
MSP8
R: Tape & Reel
V: Halogen free package
Note
AiT provides all RoHS products,
suffix “ V “ means Halogen free Package
REV2.1
- JUL 2012 RELEASED, SEP 2012 UPDATED -
- 1 -
A4053
BATTERY MANAGEMENT
AiT Semiconductor Inc.
www.ait-ic.com
1A LINEAR LI-ION BATTERY CHARGER
PIN DESCRIPTION
Top View
Function
Pin # Symbol
Battery temperature detection input. TEMP pin to receive the battery NTC sensor output. If
the TEMP pin voltage is less than the input voltage is greater than 45% or 80% of the input
1
TEMP voltage means the battery temperature is too low or too high, then the charge has been
suspended. If the TEMP direct access GND, battery temperature detection canceled, the
other charged and functioning properly.
Charge Current Program, Charge Current Monitor and Shutdown Pin. The charge current is
programmed by connecting a 1% resistor, RPROG, to ground. When charging in constant-current
mode, this pin servos to 1V. In all modes, the voltage on this pin can be used to measure the charge
current using the following formula: IBAT = (VPROG/RPROG) •1000. The PROG pin can also be used to
PROG shut down the charger. Disconnecting the program resistor from ground allows a 3uA current to pull
the PROG pin high. When it reaches the 1.21V shutdown threshold voltage, the charger enters
shutdown mode, charging stops and the input supply current drops to 50uA. This pin is also clamped
to approximately 2.4V. Driving this pin to voltages beyond the clamp voltage will draw currents as
high as 1.5mA. Reconnecting RPROG to ground will return the charger to normal operation.
2
Ground
3
4
GND
Positive Input Supply Voltage. Provides power to the charger, VCC can range from 4.25V to
6.5V and should be bypassed with at least a 10uF capacitor. When VCC drops to within
30mV of the BAT pin voltage, the A4051 enters shutdown mode, dropping IBAT to less than
2uA.
VCC
Charge Current Output. Provides charge current to the battery and regulates the final float
voltage to 4.2V. An internal precision resistor divider from this pin sets the float voltage
which is disconnected in shutdown mode
5
6
7
8
BAT
The completion of battery charging instructions side. When the battery charge is complete,
STDBY STDBY pulled low by internal switches, indicating the completion of charging. In addition,
STDBY pin will be in a high-impedance state.
Open-Drain Charge Status Output. When the battery is charging, the CHRG pin is pulled
CHRG low by an internal N-channel MOSFET. When the charge cycle is completed, CHRG pin
will be in a high-impedance state.
Chip enable input High input level would A4051 is in normal working condition; low input
level so that A4051 is prohibited charging status. CE pin can be TTL or CMOS level-level
driver
CE
REV2.1
- JUL 2012 RELEASED, SEP 2012 UPDATED -
- 2 -
A4053
BATTERY MANAGEMENT
AiT Semiconductor Inc.
www.ait-ic.com
1A LINEAR LI-ION BATTERY CHARGER
ABSOLUTE MAXIMUM RATINGS
VCC, Input Supply Voltage
VPROG, PROG pin Voltage
VBAT, BAT pin Voltage
VSS-0.3 V~VSS+7V
VSS-0.3 V~VCC+0.3V
VSS-0.3 V~7 V
VSS-0.3V~VSS+7V
1400mA
VCHRG, CHAG pin Voltage
IBAT, BAT pin Current
IPROG, PROG pin Current
1400uA
TOPA, Operating Ambient Temperature
TSTR, Storage Temperature
Lead Temperature (Soldering, 10s)
-40℃~+85℃
-65℃~+125℃
260℃
Stresses above may cause permanent damage to the device. These are stress ratings only and functional operation of the device at
these or any other conditions beyond those indicated in the Electrical Characteristics are not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
REV2.1
- JUL 2012 RELEASED, SEP 2012 UPDATED -
- 3 -
A4053
BATTERY MANAGEMENT
AiT Semiconductor Inc.
www.ait-ic.com
1A LINEAR LI-ION BATTERY CHARGER
ELECTRICAL CHARACTERISTICS
Parameter
Symbol
VCC
Conditions
Min
Typ
Max
Unit
Input supply voltage
4.25
-
-
-
6.5
2000
500
V
uA
uA
Charge mode, RPROG =10K
Standby mode
350
150
Input supply current
Regulated Output Voltage
BAT pin Current
ICC
VFLOAT
IBAT
Shutdown mode
(RPROG not connected,
VCC<VBAT or VCC<VUV)
-
50
100
uA
0°C≤TA≤85°C, IBAT = 40mA 4.158
4.2
500
1000 1100
-2.5
1
4.242
550
V
R
PROG =2k,Current mode
450
900
0
-
-
mA
RPROG =1k,Current mode
Standby mode, VBAT=4.2V
Shutdown mode
Sleep mode, VCC=0V
VBAT<VTRIKL, RPROG=1k
-6
2.5
2.5
110
uA
0.3
100
Trickle charge current
Trickle charge Threshold
Voltage
Trickle voltage hysteresis
voltage
VCC Undervoltage lockout
Threshold
VCC undervoltage lockout
hysteresis
VCC-VBAT Lockout Threshold
voltage
ITRIKL
90
mA
V
VTRIKL
RPROG =10K,VBAT Rising
RPROG =10k
2.8
60
2.9
80
3.0
110
3.93
300
VTRHYS
VUV
VUVHYS
VASD
mV
V
From VCC low to high
3.7
150
3.8
200
mV
mV
V
CC from low to high
VCC from high to low
PROG=1k
50
5
100
40
140
50
R
0.085
0.1
0.115
C/10 Termination Current
Threshold
ITERM
mA/mA
RPROG=2k
RPROG =1k, Current mode
0.085
0.93
-
0.1
1.0
0.115
1.07
0.6
PROG pin Voltage
VPROG
VCHRG
VSTDBY
V
V
V
CHRG pin Output low voltage
STDBY pin Output low voltage
ICHRG=5mA
0.35
ISTDBY=5mA
-
0.35
0.6
Recharge Battery threshold
Voltage
ΔVRECG VFLOAT - VRECHRG
-
100
200
mV
CE high voltage
CE low voltage
VCE-H
VCE-L
1.2
-
-
-
-
V
V
0.6
TEMP pin voltage of the
high-end flip
VTEMP-H
VTEMP-L
TLIM
-
43
-
80
45
82
-
%VCC
%VCC
℃
TEMP pin voltage of the low-end flip
Limited temperature patterns in
the junction temperature
145
-
REV2.1
- JUL 2012 RELEASED, SEP 2012 UPDATED -
- 4 -
A4053
BATTERY MANAGEMENT
AiT Semiconductor Inc.
www.ait-ic.com
1A LINEAR LI-ION BATTERY CHARGER
TYPICAL CHARACTERISTICS
1. VPROG vs VIN
2. VFLOAT vs VCC
3. ITRICKL vs VCC (VBAT=2.5V)
4. IBAT vs VCC (VBAT=3.8V)
5. IBAT vs VBAT
6. Regulated Output (Float) Voltage vs Temp.
REV2.1
- JUL 2012 RELEASED, SEP 2012 UPDATED -
- 5 -
A4053
BATTERY MANAGEMENT
AiT Semiconductor Inc.
www.ait-ic.com
1A LINEAR LI-ION BATTERY CHARGER
7. PROG Pin Voltage vs Temperature
8. Charge Current vs PROG Pin Voltage
9. Trickle Charge Threshold vs Temperature
10. Recharge Voltage Threshold vs Temperature
12. PROG Pin Pull-Up Current vs Temperature and
Supply Voltage
11. Charge Current vs Ambient Temperature
REV2.1
- JUL 2012 RELEASED, SEP 2012 UPDATED -
- 6 -
A4053
BATTERY MANAGEMENT
AiT Semiconductor Inc.
www.ait-ic.com
1A LINEAR LI-ION BATTERY CHARGER
13. PROG Pin Current vs PROG Pin Voltage
(Pull-Up Current)
14. PROG Pin Current vs PROG Pin Voltage
(Clamp Current)
REV2.1
- JUL 2012 RELEASED, SEP 2012 UPDATED -
- 7 -
A4053
BATTERY MANAGEMENT
AiT Semiconductor Inc.
www.ait-ic.com
1A LINEAR LI-ION BATTERY CHARGER
BLOCK DIAGRAM
REV2.1
- JUL 2012 RELEASED, SEP 2012 UPDATED -
- 8 -
A4053
BATTERY MANAGEMENT
AiT Semiconductor Inc.
www.ait-ic.com
1A LINEAR LI-ION BATTERY CHARGER
PACKAGE INFORMATION
Dimension in P-MSOP8 (Unit: mm)
Symbol
Min
Max
A
A1
A2
b
0.820
0.020
0.750
0.250
0.090
2.900
1.100
0.150
0.950
0.380
0.230
3.100
c
D
e
0.650(BSC)
E
2.900
4.750
0.400
0°
3.100
5.050
0.800
6°
E1
L
θ
REV2.1
- JUL 2012 RELEASED, SEP 2012 UPDATED -
- 9 -
A4053
BATTERY MANAGEMENT
AiT Semiconductor Inc.
www.ait-ic.com
1A LINEAR LI-ION BATTERY CHARGER
IMPORTANT NOTICE
AiT Semiconductor Inc. (AiT) reserves the right to make changes to any its product, specifications, to
discontinue any integrated circuit product or service without notice, and advises its customers to obtain the
latest version of relevant information to verify, before placing orders, that the information being relied on is
current.
AiT Semiconductor Inc.'s integrated circuit products are not designed, intended, authorized, or warranted to
be suitable for use in life support applications, devices or systems or other critical applications. Use of AiT
products in such applications is understood to be fully at the risk of the customer.
As used herein may
In order to
involve potential risks of death, personal injury, or servere property, or environmental damage.
minimize risks associated with the customer's applications, the customer should provide adequate design and
operating safeguards.
AiT Semiconductor Inc. assumes to no liability to customer product design or application support. AiT
warrants the performance of its products of the specifications applicable at the time of sale.
REV2.1
- JUL 2012 RELEASED, SEP 2012 UPDATED -
- 10 -
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明