ACS724LMATR-30AB-T [ALLEGRO]
Hall Effect Sensor,;型号: | ACS724LMATR-30AB-T |
厂家: | ALLEGRO MICROSYSTEMS |
描述: | Hall Effect Sensor, 信息通信管理 输出元件 传感器 换能器 |
文件: | 总23页 (文件大小:734K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ACS724LMA
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC with
Common-Mode Field Rejection in High-Isolation SOIC16 Package
DESCRIPTION
FEATURES AND BENEFITS
• AEC-Q100 automotive qualified
TheAllegro™ACS724LMAcurrentsensorICisaneconomical
andprecisesolutionforACorDCcurrentsensinginautomotive,
industrial,commercial,andcommunicationsystems.Thesmall
package is ideal for space-constrained applications while also
saving costs due to reduced board area. Typical applications
includeelectricvehicleson-boardchargers, motorcontrol,load
detection and management, switched-mode power supplies,
and overcurrent fault protection.
• Differential Hall sensing rejects common-mode fields
• Patented integrated digital temperature compensation
circuitry allows for near closed loop accuracy over
temperature in an open loop sensor
• UL60950-1 (ed. 2) certification (pending)
□ Dielectric Strength Voltage = 4.8 kVRMS
□ Basic Isolation Working Voltage = 1097 VRMS
□ Reinforced Isolation Working Voltage = 565 VRMS
• Industry-leading noise performance with greatly
improved bandwidth through proprietary amplifier and
filter design techniques
• Filter pin allows user to filter output for improved
resolution at lower bandwidth
• 0.85 mΩ primary conductor resistance for low power
loss and high inrush current withstand capability
• Low-profile SOIC16 package suitable for space-
constrained applications
The device consists of a precise, low-offset, linear Hall
sensor circuit with a copper conduction path located near the
surface of the die.Applied current flowing through this copper
conduction path generates a magnetic field which is sensed
by the integrated Hall IC and converted into a proportional
voltage. The current is sensed differentially in order to reject
common-mode fields, improving accuracy in magnetically
noisyenvironments.Theinherentdeviceaccuracyisoptimized
through the close proximity of the magnetic field to the Hall
transducer. A precise, proportional voltage is provided by the
low-offset,chopper-stabilizedBiCMOSHallIC,whichincludes
Allegro’spatenteddigitaltemperaturecompensation,resulting
inextremelyaccurateperformanceovertemperature.Theoutput
of the device has a positive slope when an increasing current
flows through the primary copper conduction path (from pins
1 through 4, to pins 5 through 8), which is the path used for
current sensing. The internal resistance of this conductive path
is 0.85 mΩ typical, providing low power loss.
• 4.5 to 5.5 V single supply operation
• Output voltage proportional to AC or DC current
• Factory-trimmed sensitivity and quiescent output voltage
for improved accuracy
• Chopper stabilization results in extremely stable
quiescent output voltage
• Nearly zero magnetic hysteresis
• Ratiometric output from supply voltage
PACKAGE: 16-pin SOICW (suffix MA)
The terminals of the conductive path are electrically isolated
from the sensor leads (pins 9 through 16). This allows the
ACS724LMAcurrent sensor IC to be used in high-side current
sense applications without the use of high-side differential
amplifiers or other costly isolation techniques.
Not to scale
Continued on the next page…
16
ACS724LMA NC
1
2
3
The ACS724LMA outputs an
IP+
IP+
IP+
IP+
15
analog signal, VIOUT, that
changes proportionally with
GND
NC
+IP
14
4
the bidirectional AC or DC
primary sensed current, IP,
within the specified measure-
ment range.
13
12
11
10
9
FILTER
IP
VIOUT
NC
CF
5
6
7
CL
1 nF
IP–
IP–
IP–
IP–
The FILTER pin can be used
to decrease the bandwidth in
order to optimize the noise
performance.
–IP
VCC
NC
8
CBYPASS
0.1 µF
Typical Application
ACS724LMA-DS, Rev. 6
MCO-0000322
March 9, 2018
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
DESCRIPTION (continued)
The ACS724LMA is provided in a low-profile surface-mount
SOIC16 package. The leadframe is plated with 100% matte tin,
whichiscompatiblewithstandardlead(Pb)freeprintedcircuitboard
assembly processes. Internally, the device is Pb-free. The device is
fully calibrated prior to shipment from the factory.
SELECTION GUIDE
Sens(Typ) at VCC = 5 V
Part Number
IPR (A)
TA (°C)
Packing [1]
(mV/A)
100
66
ACS724LMATR-20AB-T
ACS724LMATR-30AB-T
ACS724LMATR-30AU-T
ACS724LMATR-50AB-T
ACS724LMATR-50AU-T
ACS724LMATR-65AB-T
±20
±30
30
132
40
–40 to 150
Tape and Reel, 1000 pieces per reel
±50
50
80
±65
30.75
[1] Contact Allegro for additional packing options.
Allegro MicroSystems, LLC
115 Northeast Cutoff
2
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
Characteristic
Symbol
VCC
Notes
Rating
6
Units
V
Supply Voltage
Reverse Supply Voltage
Output Voltage
VRCC
–0.1
V
VIOUT
VRIOUT
TA
VCC + 0.5
–0.1
V
Reverse Output Voltage
Operating Ambient Temperature
Junction Temperature
V
Range L
–40 to 150
165
°C
°C
TJ(max)
Storage Temperature
Tstg
–65 to 165
°C
ISOLATION CHARACTERISTICS
Characteristic
Symbol
Notes
Rating
Unit
Tested ±5 pulses at 2/minute in compliance to IEC 61000-4-5
1.2 µs (rise) / 50 µs (width).
Dielectric Surge Strength Test Voltage
Dielectric Strength Test Voltage [1]
VSURGE
10000
4800
V
Agency type-tested for 60 seconds per UL 60950-1
(edition 2). Production tested at 3000 VRMS for 1 second, in
accordance with UL 60950-1 (edition 2).
VISO
VRMS
1550
1097
800
VPK
VRMS or VDC
VPK
Maximum approved working voltage for basic (single) isolation
according to UL 60950-1 (edition 2).
Working Voltage for Basic Isolation [1]
VWVBI
Maximum approved working voltage for reinforced isolation
according to UL 60950-1 (edition 2).
Working Voltage for Reinforced Isolation [1]
VWVRI
565
7.5
VRMS or VDC
mm
Clearance
Creepage
Dcl
Dcr
Minimum distance through air from IP leads to signal leads.
Minimum distance along package body from IP leads to signal
leads
8.2
mm
[1] Certification pending.
THERMAL CHARACTERISTICS
Characteristic
Symbol
Test Conditions [2]
Value Units
Mounted on the Allegro 85-0738 evaluation board with 700 mm2 of 4 oz.
copper on each side, connected to pins 1 and 2, and to pins 3 and 4, with
thermal vias connecting the layers. Performance values include the power
consumed by the PCB.
Package Thermal Resistance
(Junction to Ambient)
RθJA
23
5
°C/W
°C/W
Package Thermal Resistance
(Junction to Lead)
RθJL
Mounted on the Allegro ASEK724 evaluation board.
[2] Additional thermal information available on the Allegro website.
Allegro MicroSystems, LLC
115 Northeast Cutoff
3
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
V
CC
VCC
Master Current
Supply
To All Subcircuits
POR
Programming
Control
Hall
Current
Drive
C
0.1 µF
BYPASS
EEPROM and
Control Logic
Temperature
Sensor
Offset
Control
IP+
IP+
IP+
IP+
Sensitivity
Control
+
–
+
VIOUT
R
F(int)
–
IP–
IP–
IP–
IP–
GND
FILTER
C
F
Functional Block Diagram
Terminal List Table
16 NC
IP+
IP+
IP+
IP+
IP-
1
2
3
4
5
6
7
8
Number
1, 2, 3, 4
5, 6, 7, 8
Name
Description
15 GND
14 NC
IP+
IP-
Terminals for current being sensed; fused internally
Terminals for current being sensed; fused internally
13 FILTER
12 VIOUT
11 NC
No internal connection; recommended to be left unconnected in order to
maintain high creepage
9, 16
10
NC
VCC
NC
Device power supply terminal
IP-
No internal connection; recommened to connect to GND for the best ESD
performance
IP-
10 VCC
11, 14
IP-
9 NC
12
13
15
VIOUT
FILTER
GND
Analog output signal
Terminal for external capacitor that sets bandwidth
Signal ground terminal
Pinout Diagram
Allegro MicroSystems, LLC
115 Northeast Cutoff
4
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
COMMON ELECTRICAL CHARACTERISTICS [1]: Valid through the full range of TA = –40°C to 150°C and VCC= 5 V,
unless otherwise specified
Characteristic
Symbol
VCC
Test Conditions
Min.
4.5
–
Typ.
5
Max.
5.5
14
10
–
Units
V
Supply Voltage
Supply Current
ICC
VCC within VCC(min) and VCC(max)
VIOUT to GND
10
–
mA
nF
Output Capacitance Load
Output Resistive Load
CL
–
RL
VIOUT to GND
4.7
–
–
kΩ
mΩ
kΩ
dB
Primary Conductor Resistance
Internal Filter Resistance [2]
Common Mode Field Rejection Ratio
Primary Hall Coupling Factor
Secondary Hall Coupling Factor
Hall Plate Sensitivity Matching
Rise Time
RIP
TA = 25°C
0.85
1.7
40
4.5
0.5
±1
3
–
RF(INT)
CMFRR
G1
–
–
Uniform external magnetic field
TA = 25°C
–
–
–
–
G/A
G/A
%
G2
TA = 25°C
–
–
SensMATCH
tr
TA = 25°C
–
–
IP = IP(max), TA = 25°C, CL = 1 nF
IP = IP(max), TA = 25°C, CL = 1 nF
IP = IP(max), TA = 25°C, CL = 1 nF
Small signal –3 dB, CL = 1 nF
–
–
μs
Propagation Delay
tpd
–
2
–
μs
Response Time
tRESPONSE
BW
–
4
–
μs
Internal Bandwidth
–
120
–
kHz
Input-referenced noise density;
TA = 25°C, CL = 1 nF
µARMS/
√Hz
Noise Density
IND
–
450
–
Input-referenced noise; CF = 4.7 nF,
CL = 1 nF, BW = 18 kHz, TA = 25°C
Noise
IN
–
–1
–
60
–
–
1
–
mARMS
Nonlinearity
ELIN
Through full range of IP
%
–
SENS_RAT_
COEF
Sensitivity Ratiometry Coefficient
V
V
CC = 4.5 to 5.5 V, TA = 25°C
CC = 4.5 to 5.5 V, TA = 25°C
1.3
QVO_RAT_
COEF
Zero-Current Output Ratiometry Coefficient
Saturation Voltage [3]
–
1
–
–
VOH
VOL
RL = 4.7 kΩ, TA = 25°C
RL = 4.7 kΩ, TA = 25°C
VCC – 0.5
–
–
–
–
V
V
0.5
Output reaches 90% of steady-state
level, TA = 25°C, IP = IPR(max) applied
Power-On Time
tPO
–
80
–
μs
Shorted Output to Ground Current
Shorted Output to VCC Current
ISC(GND)
ISC(VCC)
TA = 25°C
TA = 25°C
–
–
3.3
45
–
–
mA
mA
[1] Device may be operated at higher primary current levels, IP, ambient temperatures, TA, and internal leadframe temperatures, provided the Maximum Junction Tempera-
ture, TJ(max), is not exceeded.
[2]
R
forms an RC circuit via the FILTER pin.
F(INT)
[3] The sensor IC will continue to respond to current beyond the range of IP until the high or low saturation voltage; however, the nonlinearity in this region will be worse than
through the rest of the measurement range.
Allegro MicroSystems, LLC
115 Northeast Cutoff
5
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
xLMATR-20AB PERFORMANCE CHARACTERISTICS: TA Range L, valid at TA = 40°C to 150°C, VCC = 5 V,
unless otherwise specified
Characteristic
NOMINAL PERFORMANCE
Current Sensing Range
Sensitivity
Symbol
Test Conditions
Min.
Typ. [1]
Max.
Units
IPR
–20
–
–
20
–
A
Sens
IPR(min) < IP < IPR(max)
100
mV/A
VCC
0.5
×
Zero Current Output Voltage
VIOUT(Q)
Bidirectional; IP = 0 A
–
–
V
ACCURACY PERFORMANCE
IP = IPR(max), TA = 25°C to 150°C
IP = IPR(max), TA = –40°C to 25°C
–2.5
–6
±0.8
±2.7
2.5
6
%
%
Total Output Error [2]
ETOT
TOTAL OUTPUT ERROR COMPONENTS [3]: ETOT = ESENS + 100 × VOE/(Sens × IP)
TA = 25°C to 150°C, measured at IP = IPR(max)
–2
±0.7
±2.6
±7
2
%
%
Sensitivity Error
Offset Voltage
ESENS
TA = –40°C to 25°C, measured at IP = IPR(max)
IP = 0 A, TA = 25°C to 150°C
–5.5
–15
–30
5.5
15
30
mV
mV
VOE
IP = 0 A, TA = –40°C to 25°C
±15
LIFETIME DRIFT CHARACTERISTICS [4]
TA = 25°C to 150°C
TA = –40°C to 25°C
TA = 25°C to 150°C
TA = –40°C to 25°C
TA = 25°C to 150°C
TA = –40°C to 25°C
–3
–5.5
–3.5
–6
±1
±3
±1
±3
–
3
%
%
Sensitivity Error Including
Esens_drift
Lifetime Drift
5.5
3.5
6
%
Total Output Error Including
Etot_drift
Lifetime Drift
%
–20
–30
20
30
mV
mV
Offset Error Including Lifetime
Drift
EOff_Drift
±20
[1] Typical values with +/- are 3 sigma values.
[2] Percentage of IP, with IP = IPR(max).
[3] A single part will not have both the maximum/minimum sensitivity error and maximum/minimum offset voltage, as that would violate the maximum/minimum total output
error specification. Also, 3 sigma distribution values are combined by taking the square root of the sum of the squares. See Application Information section.
[4] Based on characterization data obtained during AEC-Q100 stress testing.
Allegro MicroSystems, LLC
115 Northeast Cutoff
6
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
xLMATR-30AB PERFORMANCE CHARACTERISTICS: TA Range L, valid at TA = 40°C to 150°C, VCC = 5 V,
unless otherwise specified
Characteristic
NOMINAL PERFORMANCE
Current Sensing Range
Sensitivity
Symbol
Test Conditions
Min.
Typ. [1]
Max.
Units
IPR
–30
–
–
30
–
A
Sens
IPR(min) < IP < IPR(max)
66
mV/A
VCC
0.5
×
Zero Current Output Voltage
VIOUT(Q)
Bidirectional; IP = 0 A
–
–
V
ACCURACY PERFORMANCE
IP = IPR(max), TA = 25°C to 150°C
IP = IPR(max), TA = –40°C to 25°C
–2.5
–6
±0.8
±2.7
2.5
6
%
%
Total Output Error [2]
ETOT
TOTAL OUTPUT ERROR COMPONENTS [3]: ETOT = ESENS + 100 × VOE/(Sens × IP)
TA = 25°C to 150°C, measured at IP = IPR(max)
–2
±0.7
±2.6
±7
2
%
%
Sensitivity Error
Offset Voltage
ESENS
TA = –40°C to 25°C, measured at IP = IPR(max)
IP = 0 A, TA = 25°C to 150°C
–5.5
–15
–30
5.5
15
30
mV
mV
VOE
IP = 0 A, TA = –40°C to 25°C
±15
LIFETIME DRIFT CHARACTERISTICS [4]
TA = 25°C to 150°C
TA = –40°C to 25°C
TA = 25°C to 150°C
TA = –40°C to 25°C
TA = 25°C to 150°C
TA = –40°C to 25°C
–3
–5.5
–3.5
–6
±1
±3
±1
±3
–
3
%
%
Sensitivity Error Including
Esens_drift
Lifetime Drift
5.5
3.5
6
%
Total Output Error Including
Etot_drift
Lifetime Drift
%
–20
–30
20
30
mV
mV
Offset Error Including Lifetime
Drift
EOff_Drift
±20
[1] Typical values with +/- are 3 sigma values.
[2] Percentage of IP, with IP = IPR(max).
[3] A single part will not have both the maximum/minimum sensitivity error and maximum/minimum offset voltage, as that would violate the maximum/minimum total output
error specification. Also, 3 sigma distribution values are combined by taking the square root of the sum of the squares. See Application Information section.
[4] Based on characterization data obtained during AEC-Q100 stress testing.
Allegro MicroSystems, LLC
115 Northeast Cutoff
7
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
xLMATR-30AU PERFORMANCE CHARACTERISTICS: TA Range L, valid at TA = 40°C to 150°C, VCC = 5 V,
unless otherwise specified
Characteristic
NOMINAL PERFORMANCE
Current Sensing Range
Sensitivity
Symbol
Test Conditions
Min.
Typ. [1]
Max.
Units
IPR
0
–
–
30
–
A
Sens
IPR(min) < IP < IPR(max)
132
mV/A
VCC
0.1
×
Zero Current Output Voltage
VIOUT(Q)
Unidirectional; IP = 0 A
–
–
V
ACCURACY PERFORMANCE
IP = IPR(max), TA = 25°C to 150°C
IP = IPR(max), TA = –40°C to 25°C
–2.5
–6
±0.7
±2.5
2.5
6
%
%
Total Output Error [2]
ETOT
TOTAL OUTPUT ERROR COMPONENTS [3]: ETOT = ESENS + 100 × VOE/(Sens × IP)
TA = 25°C to 150°C, measured at IP = IPR(max)
–2
±0.7
±2.5
±7
2
%
%
Sensitivity Error
Offset Voltage
ESENS
TA = –40°C to 25°C, measured at IP = IPR(max)
IP = 0 A, TA = 25°C to 150°C
–5.5
–15
–30
5.5
15
30
mV
mV
VOE
IP = 0 A, TA = –40°C to 25°C
±20
LIFETIME DRIFT CHARACTERISTICS [4]
TA = 25°C to 150°C
TA = –40°C to 25°C
TA = 25°C to 150°C
TA = –40°C to 25°C
TA = 25°C to 150°C
TA = –40°C to 25°C
–3
–5.5
–3.5
–6
±1
±3
±1
±3
–
3
%
%
Sensitivity Error Including
Esens_drift
Lifetime Drift
5.5
3.5
6
%
Total Output Error Including
Etot_drift
Lifetime Drift
%
–20
–30
20
30
mV
mV
Offset Error Including Lifetime
Drift
EOff_Drift
±20
[1] Typical values with +/- are 3 sigma values.
[2] Percentage of IP, with IP = IPR(max).
[3] A single part will not have both the maximum/minimum sensitivity error and maximum/minimum offset voltage, as that would violate the maximum/minimum total output
error specification. Also, 3 sigma distribution values are combined by taking the square root of the sum of the squares. See Application Information section.
[4] Based on characterization data obtained during AEC-Q100 stress testing.
Allegro MicroSystems, LLC
115 Northeast Cutoff
8
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
xLMATR-50AB PERFORMANCE CHARACTERISTICS: TA Range L, valid at TA = 40°C to 150°C, VCC = 5 V,
unless otherwise specified
Characteristic
NOMINAL PERFORMANCE
Current Sensing Range
Sensitivity
Symbol
Test Conditions
Min.
Typ. [1]
Max.
Units
IPR
–50
–
–
50
–
A
Sens
IPR(min) < IP < IPR(max)
40
mV/A
VCC
0.5
×
Zero Current Output Voltage
VIOUT(Q)
Bidirectional; IP = 0 A
–
–
V
ACCURACY PERFORMANCE
IP = IPR(max), TA = 25°C to 150°C
IP = IPR(max), TA = –40°C to 25°C
–2.5
–6
±1
±3
2.5
6
%
%
Total Output Error [2]
ETOT
TOTAL OUTPUT ERROR COMPONENTS [3]: ETOT = ESENS + 100 × VOE/(Sens × IP)
TA = 25°C to 150°C, measured at IP = IPR(max)
–2
±1
2
%
%
Sensitivity Error
Offset Voltage
ESENS
TA = –40°C to 25°C, measured at IP = IPR(max)
IP = 0 A, TA = 25°C to 150°C
–5.5
–15
–30
±2.8
±5
5.5
15
30
mV
mV
VOE
IP = 0 A, TA = –40°C to 25°C
±20
LIFETIME DRIFT CHARACTERISTICS [4]
TA = 25°C to 150°C
TA = –40°C to 25°C
TA = 25°C to 150°C
TA = –40°C to 25°C
TA = 25°C to 150°C
TA = –40°C to 25°C
–3
–5.5
–3.5
–6
±1
±3
±1
±3
–
3
%
%
Sensitivity Error Including
Esens_drift
Lifetime Drift
5.5
3.5
6
%
Total Output Error Including
Etot_drift
Lifetime Drift
%
–20
–30
20
30
mV
mV
Offset Error Including Lifetime
Drift
EOff_Drift
±20
[1] Typical values with +/- are 3 sigma values.
[2] Percentage of IP, with IP = IPR(max).
[3] A single part will not have both the maximum/minimum sensitivity error and maximum/minimum offset voltage, as that would violate the maximum/minimum total output
error specification. Also, 3 sigma distribution values are combined by taking the square root of the sum of the squares. See Application Information section.
[4] Based on characterization data obtained during AEC-Q100 stress testing.
Allegro MicroSystems, LLC
115 Northeast Cutoff
9
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
xLMATR-50AU PERFORMANCE CHARACTERISTICS: TA Range L, valid at TA = 40°C to 150°C, VCC = 5 V,
unless otherwise specified
Characteristic
NOMINAL PERFORMANCE
Current Sensing Range
Sensitivity
Symbol
Test Conditions
Min.
Typ. [1]
Max.
Units
IPR
0
–
–
50
–
A
Sens
IPR(min) < IP < IPR(max)
80
mV/A
VCC
0.1
×
Zero Current Output Voltage
VIOUT(Q)
Unidirectional; IP = 0 A
–
–
V
ACCURACY PERFORMANCE
IP = IPR(max), TA = 25°C to 150°C
IP = IPR(max), TA = –40°C to 25°C
–2.5
–6
±1
±3
2.5
6
%
%
Total Output Error [2]
ETOT
TOTAL OUTPUT ERROR COMPONENTS [3]: ETOT = ESENS + 100 × VOE/(Sens × IP)
TA = 25°C to 150°C, measured at IP = IPR(max)
–2
±1
2
%
%
Sensitivity Error
Offset Voltage
ESENS
TA = –40°C to 25°C, measured at IP = IPR(max)
IP = 0 A, TA = 25°C to 150°C
–5.5
–15
–30
±2.8
±5
5.5
15
30
mV
mV
VOE
IP = 0 A, TA = –40°C to 25°C
±20
LIFETIME DRIFT CHARACTERISTICS [4]
TA = 25°C to 150°C
TA = –40°C to 25°C
TA = 25°C to 150°C
TA = –40°C to 25°C
TA = 25°C to 150°C
TA = –40°C to 25°C
–3
–5.5
–3.5
–6
±1
±3
±1
±3
–
3
%
%
Sensitivity Error Including
Esens_drift
Lifetime Drift
5.5
3.5
6
%
Total Output Error Including
Etot_drift
Lifetime Drift
%
–20
–30
20
30
mV
mV
Offset Error Including Lifetime
Drift
EOff_Drift
±20
[1] Typical values with +/- are 3 sigma values.
[2] Percentage of IP, with IP = IPR(max).
[3] A single part will not have both the maximum/minimum sensitivity error and maximum/minimum offset voltage, as that would violate the maximum/minimum total output
error specification. Also, 3 sigma distribution values are combined by taking the square root of the sum of the squares. See Application Information section.
[4] Based on characterization data obtained during AEC-Q100 stress testing.
Allegro MicroSystems, LLC
115 Northeast Cutoff
10
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
xLMATR-65AB PERFORMANCE CHARACTERISTICS: TA Range L, valid at TA = 40°C to 150°C, VCC = 5 V,
unless otherwise specified
Characteristic
NOMINAL PERFORMANCE
Current Sensing Range
Sensitivity
Symbol
Test Conditions
Min.
Typ. [1]
Max.
Units
IPR
–65
–
–
65
–
A
Sens
IPR(min) < IP < IPR(max)
30.75
mV/A
VCC
0.5
×
Zero Current Output Voltage
VIOUT(Q)
Bidirectional; IP = 0 A
–
–
V
ACCURACY PERFORMANCE
IP = IPR(max), TA = 25°C to 150°C
IP = IPR(max), TA = –40°C to 25°C
–2.5
–6
±1
±3
2.5
6
%
%
Total Output Error [2]
ETOT
TOTAL OUTPUT ERROR COMPONENTS [3]: ETOT = ESENS + 100 × VOE/(Sens × IP)
TA = 25°C to 150°C, measured at IP = IPR(max)
–2
±1
2
%
%
Sensitivity Error
Offset Voltage
ESENS
TA = –40°C to 25°C, measured at IP = IPR(max)
IP = 0 A, TA = 25°C to 150°C
–5.5
–15
–30
±2.8
±5
5.5
15
30
mV
mV
VOE
IP = 0 A, TA = –40°C to 25°C
±20
LIFETIME DRIFT CHARACTERISTICS [4]
TA = 25°C to 150°C
TA = –40°C to 25°C
TA = 25°C to 150°C
TA = –40°C to 25°C
TA = 25°C to 150°C
TA = –40°C to 25°C
–3
–5.5
–3.5
–6
±1
±3
±1
±3
–
3
%
%
Sensitivity Error Including
Esens_drift
Lifetime Drift
5.5
3.5
6
%
Total Output Error Including
Etot_drift
Lifetime Drift
%
–20
–30
20
30
mV
mV
Offset Error Including Lifetime
Drift
EOff_Drift
±20
[1] Typical values with +/- are 3 sigma values.
[2] Percentage of IP, with IP = IPR(max).
[3] A single part will not have both the maximum/minimum sensitivity error and maximum/minimum offset voltage, as that would violate the maximum/minimum total output
error specification. Also, 3 sigma distribution values are combined by taking the square root of the sum of the squares. See Application Information section.
[4] Based on characterization data obtained during AEC-Q100 stress testing.
Allegro MicroSystems, LLC
115 Northeast Cutoff
11
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
CHARACTERISTIC PERFORMANCE
xLMATR-20AB
Offset Voltage vs. Temperature
Zero Current Output Voltage vs. Temperature
25
20
15
10
5
2525
2520
2515
2510
2505
2500
2495
2490
2485
2480
2475
0
-5
-10
-15
-20
-25
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
Sensitivity Error vs. Temperature
Sensitivity vs. Temperature
5
4
105
104
103
102
101
100
99
3
2
1
0
-1
-2
-3
-4
-5
98
97
96
95
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
Linearity Error vs. Temperature
Total Error vs. Temperature
1.5
1.0
5
4
3
2
0.5
1
0.0
0
-1
-2
-3
-4
-5
-0.5
-1.0
-1.5
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
+3 Sigma
Average
-3 Sigma
Allegro MicroSystems, LLC
115 Northeast Cutoff
12
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
CHARACTERISTIC PERFORMANCE
xLMATR-30AB
Offset Voltage vs. Temperature
Zero Current Output Voltage vs. Temperature
20
15
10
5
2520
2515
2510
2505
2500
2495
2490
2485
2480
0
-5
-10
-15
-20
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
Sensitivity Error vs. Temperature
Sensitivity vs. Temperature
4
3
70
69
68
67
66
65
64
63
62
2
1
0
-1
-2
-3
-4
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
Linearity Error vs. Temperature
Total Error vs. Temperature
1.0
0.5
4
3
2
1
0.0
0
-1
-2
-3
-4
-0.5
-1.0
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
+3 Sigma
Average
-3 Sigma
Allegro MicroSystems, LLC
115 Northeast Cutoff
13
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
CHARACTERISTIC PERFORMANCE
xLMATR-30AU
Offset Voltage vs. Temperature
Zero Current Output Voltage vs. Temperature
20
15
10
5
525
520
515
510
505
500
495
490
485
480
475
0
-5
-10
-15
-20
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
Sensitivity Error vs. Temperature
Sensitivity vs. Temperature
3
2
136
135
134
133
132
131
130
129
128
1
0
-1
-2
-3
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
Linearity Error vs. Temperature
Total Error vs. Temperature
1.0
0.5
3
2
1
0.0
0
-1
-2
-3
-0.5
-1.0
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
+3 Sigma
Average
-3 Sigma
Allegro MicroSystems, LLC
115 Northeast Cutoff
14
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
CHARACTERISTIC PERFORMANCE
xLMATR-50AB
Offset Voltage vs. Temperature
Zero Current Output Voltage vs. Temperature
15
10
5
2520
2515
2510
2505
2500
2495
2490
2485
2480
0
-5
-10
-15
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
Sensitivity Error vs. Temperature
Sensitivity vs. Temperature
4
3
42
41
41
40
40
39
2
1
0
-1
-2
-3
-4
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
Linearity Error vs. Temperature
Total Error vs. Temperature
1.0
0.5
4
3
2
1
0.0
0
-1
-2
-3
-4
-0.5
-1.0
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
+3 Sigma
Average
-3 Sigma
Allegro MicroSystems, LLC
115 Northeast Cutoff
15
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
CHARACTERISTIC PERFORMANCE
xLMATR-50AU
Offset Voltage vs. Temperature
Zero Current Output Voltage vs. Temperature
20
15
10
5
520
515
510
505
500
495
490
485
480
0
-5
-10
-15
-20
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
Sensitivity Error vs. Temperature
Sensitivity vs. Temperature
4
3
84
83
82
81
80
79
78
77
76
2
1
0
-1
-2
-3
-4
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
Linearity Error vs. Temperature
Total Error vs. Temperature
1.0
4
3
0.5
0.0
2
1
0
-1
-2
-3
-4
-0.5
-1.0
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
+3 Sigma
Average
-3 Sigma
Allegro MicroSystems, LLC
115 Northeast Cutoff
16
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
CHARACTERISTIC PERFORMANCE
xLMATR-65AB
Offset Voltage vs. Temperature
Zero Current Output Voltage vs. Temperature
15
10
5
2520
2515
2510
2505
2500
2495
2490
2485
2480
0
-5
-10
-15
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
Sensitivity Error vs. Temperature
Sensitivity vs. Temperature
4
3
32
31
30
29
2
1
0
-1
-2
-3
-4
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
Nonlinearity vs. Temperature
Total Error vs. Temperature
1
0.5
0
4
3
2
1
0
-1
-2
-3
-4
-0.5
-1
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
+3 Sigma
Average
-3 Sigma
Allegro MicroSystems, LLC
115 Northeast Cutoff
17
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
DEFINITIONS OF ACCURACY CHARACTERISTICS
sensitivity error, and at relatively low currents, ETOT will be mostly
due to Offset Voltage (VOE). In fact, at IP = 0, ETOT approaches
infinity due to the offset. This is illustrated in Figure 1 and Figure 2.
Figure 1 shows a distribution of output voltages versus IP at 25°C
and across temperature. Figure 2 shows the corresponding ETOT
versus IP.
Sensitivity (Sens)
The change in sensor IC output in response to a 1A change
through the primary conductor. The sensitivity is the product
of the magnetic coupling factor (G/A) (1 G = 0.1 mT) and the
linear IC amplifier gain (mV/G). The linear IC amplifier gain is
programmed at the factory to optimize the sensitivity (mV/A) for
the full-scale current of the device.
Accuracy Across
Temperature
Increasing
V
(V)
IOUT
Nonlinearity (ELIN
)
Accuracy at
25°C Only
The nonlinearity is a measure of how linear the output of the sen-
sor IC is over the full current measurement range. The nonlinear-
ity is calculated as:
Ideal V
IOUT
Accuracy Across
Temperature
Accuracy at
25°C Only
V
IOUT (IPR(max)) – VIOUT(Q)
× 100 (%)
1–
ELIN
=
[ {
2 × VIOUT (IPR(max)/2) – VIOUT(Q)
I
(min)
PR
+I (A)
P
V
IOUT(Q)
where VIOUT(IPR(max)) is the output of the sensor IC with the
maximum measurement current flowing through it and
VIOUT(IPR(max)/2) is the output of the sensor IC with half of the
maximum measurement current flowing through it.
–I (A)
P
Full Scale I
P
I (max)
PR
Zero Current Output Voltage (V
)
0 A
IOUT(Q)
The output of the sensor when the primary current is zero. For
a unipolar supply voltage, it nominally remains at 0.5 × VCC for
a bidirectional device and 0.1 × VCC for a unidirectional device.
Accuracy at
25°C Only
Decreasing
(V)
V
Accuracy Across
Temperature
IOUT
For example, in the case of a bidirectional output device, VCC
=
Figure 1: Output Voltage versus Sensed Current
5.0 V translates into VIOUT(Q) = 2.50 V. Variation in VIOUT(Q) can
be attributed to the resolution of the Allegro linear IC quiescent
voltage trim and thermal drift.
+E
TOT
Offset Voltage (VOE)
The deviation of the device output from its ideal quiescent value
of 0.5 × VCC (bidirectional) or 0.1 × VCC (unidirectional) due to
nonmagnetic causes. To convert this voltage to amperes, divide
by the device sensitivity, Sens.
Across Temperature
25°C Only
Total Output Error (ETOT
)
The difference between the current measurement from the sensor
IC and the actual current (IP), relative to the actual current. This
is equivalent to the difference between the ideal output voltage
and the actual output voltage, divided by the ideal sensitivity,
relative to the current flowing through the primary conduction
path:
–I
P
+I
P
V
IOUT_ideal(IP) – VIOUT(IP)
ETOT(IP) =
× 100 (%)
–E
TOT
Sensideal(IP)
× IP
The Total Output Error incorporates all sources of error and is a
function of IP. At relatively high currents, ETOT will be mostly due to
Figure 2: Total Output Error versus Sensed Current
Allegro MicroSystems, LLC
115 Northeast Cutoff
18
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
APPLICATION INFORMATION
Here, ESENS and VOE are the ±3 sigma values for those error
terms. If there is an average sensitivity error or average offset
voltage, then the average Total Error is estimated as:
Estimating Total Error versus Sensed Current
The Performance Characteristics tables give distribution
(±3 sigma) values for Total Error at IPR(max); however, one often
wants to know what error to expect at a particular current. This
can be estimated by using the distribution data for the compo-
nents of Total Error, Sensitivity Error, and Offset Voltage. The
±3 sigma value for Total Error (ETOT) as a function of the sensed
current (IP) is estimated as:
100 × VOE
AVG
ETOT (IP) = ESENS
+
AVG
AVG
Sens × IP
The resulting total error will be a sum of ETOT and ETOT_AVG
.
Using these equations and the 3 sigma distributions for Sensitiv-
ity Error and Offset Voltage, the Total Error versus sensed current
(IP) is shown here for the ACS724LMATR-20AB. As expected,
as one goes towards zero current, the error in percent goes
towards infinity due to division by zero.
2
100 × VOE
(Sens × I )
2
ETOT(IP) = ESENS
+
P
Allegro MicroSystems, LLC
115 Northeast Cutoff
19
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
DEFINITIONS OF DYNAMIC RESPONSE CHARACTERISTICS
Power-On Time (tPO)
V
V
CC
V
(typ)
CC
When the supply is ramped to its operating voltage, the device
requires a finite time to power its internal components before
responding to an input magnetic field.
V
IOUT
90% V
IOUT
Power-On Time (tPO) is defined as the time it takes for the output
voltage to settle within ±10% of its steady-state value under an
applied magnetic field, after the power supply has reached its
minimum specified operating voltage (VCC(min)) as shown in the
chart at right (refer to Figure 3).
V
CC
(min)
t
PO
t
t
1
2
t = time at which power supply reaches
1
minimum specified operating voltage
t = time at which output voltage settles
2
within ±10% of its steady state value
under an applied magnetic field
Rise Time (tr)
The time interval between: a) when the sensor IC reaches 10%
of its full-scale value; and b) when it reaches 90% of its full-
scale value (refer to Figure 4). The rise time to a step response is
used to derive the bandwidth of the current sensor IC, in which
ƒ(–3 dB) = 0.35/tr . Both tr and tRESPONSE are detrimentally
affected by eddy current losses observed in the conductive IC
ground plane.
0
t
Figure 3: Power-On Time
Primary Current
(%)
90
V
IOUT
Propagation Delay (tpd)
Rise Time, t
r
20
10
0
The propagation delay is measured as the time interval between:
a) when the primary current signal reaches 20% of its final value,
and b) when the device reaches 20% of its output corresponding
to the applied current (refer to Figure 4).
t
Propagation Delay, t
pd
Figure 4: Rise Time and Propagation Delay
Response Time (tRESPONSE
)
The time interval between: a) when the primary current signal
reaches 90% of its final value, and b) when the device reaches
90% of its output corresponding to the applied current (refer to
Figure 5).
Primary Current
(%)
90
V
IOUT
Response Time, t
RESPONSE
0
t
Figure 5: Response Time
Allegro MicroSystems, LLC
115 Northeast Cutoff
20
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
NOT TO SCALE
All dimensions in millimeters.
15.75
9.54
1.27
0.65
Package Outline
Slot in PCB to maintain >8 mm creepage
once part is on PCB
2.25
7.25
1.27
3.56
17.27
Current
In
Current
Out
Perimeter holes for stitching to the other,
matching current trace design, layers of
the PCB for enhanced thermal capability.
21.51
Figure 6: High-Isolation PCB Layout
Allegro MicroSystems, LLC
115 Northeast Cutoff
21
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
PACKAGE OUTLINE DRAWING
For Reference Only – Not for Tooling Use
(Reference MS-013AA)
NOT TO SCALE
Dimensions in millimeters
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
8°
10.30 0.20
0°
16
0.33
0.20
7.50 0.10
10.30 0.33
A
1.27
0.40
1.40 REF
1
2
Branded Face
0.25 BSC
SEATING PLANE
16X
CC
GAUGE PLANE
2.65 MAX
0.10
C
SEATING
PLANE
0.30
0.10
1.27 BSC
0.51
0.31
1.27
0.65
16
NNNNNNN
LLLLLLLL
2.25
1
B
Standard Branding Reference View
L
9.50
N = Device part number
= Assembly Lot Number, first eight characters
A
Terminal #1 mark area
B
C
Branding scale and appearance at supplier discretion
1
2
Reference land pattern layout (reference IPC7351 SOIC127P600X175-8M);
all pads a minimum of 0.20 mm from all adjacent pads; adjust as necessary
to meet application process requirements and PCB layout tolerances
C
PCB Layout Reference View
Figure 7: Package MA, 16-Pin SOICW
Allegro MicroSystems, LLC
115 Northeast Cutoff
22
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Automotive Grade, High-Accuracy, Hall-Effect-Based Current Sensor IC
with Common-Mode Field Rejection in High-Isolation SOIC16 Package
ACS724LMA
Revision History
Number
Date
Description
–
1
October 16, 2017
October 31, 2017
Initial release
Updated Lifetime Drift Characteristics (pages 6-10)
Added Sensitivity Ratiometry Coefficient and Zero-Current Output Ratiometry Coefficient to Electrical
Characteristics table (page 5).
2
November 27, 2017
3
4
5
6
January 8, 2018
January 12, 2018
January 22, 2018
March 9, 2018
Corrected certification status (page 1 and 3)
Added Dielectric Surge Strength Test Voltage to Isolation Characteristics table (page 3).
Added Common Mode Field Rejection Ratio characteristic (page 5).
Added -65AB part option.
Copyright ©2018, Allegro MicroSystems, LLC
Allegro MicroSystems, LLC reserves the right to make, from time to time, such departures from the detail specifications as may be required to
permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that
the information being relied upon is current.
Allegro’s products are not to be used in any devices or systems, including but not limited to life support devices or systems, in which a failure of
Allegro’s product can reasonably be expected to cause bodily harm.
The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, LLC assumes no responsibility for its
use; nor for any infringement of patents or other rights of third parties which may result from its use.
For the latest version of this document, visit our website:
www.allegromicro.com
Allegro MicroSystems, LLC
115 Northeast Cutoff
23
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明