800E-15YE112 [ALLEN-BRADLEY]
Push Buttons; 按钮
| 型号： | 800E-15YE112 |
| 厂家： | 
Allen-Bradley |
| 描述： | Push Buttons |
| 文件： | 总7页 (文件大小：162K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Emergency Stop Devices
Push Buttons
800 E-Stops !
Back of Panel Com ponents
Electrical Ratings
Specifications—22.5mm
Front of Panel (O perators)
Mechanical Ratings
Description
Standard contact block
ratings➋
2-Across Style
3-Across Style
NEMA, A600,
Q600, 600V AC;
NEMA, EEMAC
A600, Q600, VDE
Plastic
(800EP/ES)
Metal
(800EM/EB)
Description
0660; AC15, DC 13 AC15, DC 13 to
to IEC 947
10A max.
continuous current enclosure (40°C
to UL508, CSA22.2 (104°F) ambient) 6A
#14, IEC 947, VDE with enclosure
IEC 947
10A max. without
Thermal current
Vibration (assembled to
panel)
Shock
10 to 2000Hz, 1.52mm displacement
(peak-to-peak) max./10g max.
1/2 cycle sine wave for 11ms and no
damage at 100g
0660, part 200
(60°C (140°F))
Degree of protection
IP66 (NEMA Type 3, IP66 (NEMA Type 3,
Terminal marking
Wire capacity (screw
terminal)
Conforming to CENELEC EN50013
Min of (1) #20AWG #18 to #12AWG
3R, 4, 4X, 12, 13)
500,000 cycles:
100,000 cycles:
3R, 4, 12, 13)
mushroom
operators
mushroom key
operators (plastic),
push-pull/twist
operators
Mechanical design life
(typical)
2
Max of (2)
(0.75 to 2.5mm )
Max (2) #14AWG
or (1) #12 AWG
#14AWG or (1)
#12AWG
Dielectric strength (min)
Electrical design life cycles 1,000,000 at 2A
2,200V for one minute
50,000 cycles:
mushroom key
operators (metal)
Electrical shock
Finger-safe conforming to IP2X
protection: Per IEC 529
Mechanical Ratings
Vibration
Environm ental
Temperature range
(operating): per IEC 947-1
-25°C to +55°C (-13°F to +131°F) ➋
10 to 2000Hz
1.52mm
10 to 150Hz
0.15mm
Temperature range (short -40°C to +70°C (85°C max. for 24 hours)
displacement (peak- displacement (peak-
term storage): per IEC
947-1
-40°F to +158°F (185°F max. for 24 hours)
to-peak) max./10g
max. 6hr
to-peak) max./2g
max. 6hr
Materials
Shock
1/2 cycle sine wave 1/2 cycle sine wave
for 11ms and no for 11ms and no
damage at 100g min damage at 50g max
Bushings, mounting rings
Glass-filled
Die-cast zinc; dark
olive chromate
finish
thermoplastic
polyester, rated
UL94 V-O
Contact block mechanical 5,000,000 cycles
design
Bezels
Glass-filled
Anodized aluminum
(EB, EM, ES line)
Contact operation
N.C. slow make, double break (positive
opening); N.C.L.B. late break, double
break (positive opening)
thermoplastic
polyester, rated
UL94 V-O
Silicone rubber
Nitrile rubber
Operating forces (typical) 2.78N: all contact
blocks
Environm ental
2.6N: each N.C.
contact block
Seals: diaphragm style
Seals: lip and flat gasket
styles
Temperature range
Illuminated lenses
Transparent nylon Type 12
Operating ➋➋
-25°C to +55°C (-13°F to +131°F)
Short term storage ➋ -25°C to +55°C (70°C max for 24 hrs)
(-13°F to +131°F (158°F max for 24 hrs))
Materials
Springs
Stainless steel and zinc coated music wire
Electrical contacts:
Standard
Low voltage
Silver nickel alloy
Palladium silver
Fine silver
Gold-plated over
alloy: spanner; gold- silver
plated silver nickel:
stationary contacts
Terminals:
Screw type Plated steel
Push-on type
Agency approvals
Approvals
UL listed ➋/CSA certified
Standard conformity
UL508, UL486E
CSA22.2 #14,
NEMA ICS-1 and
ICS-2 (1983), IEC
144, IEC 947-1, IEC 0660 Part 201; BS
947-5, VDE 0550, 4794; CEE 24; UL
NEMA ICS-1 and
!
See Performance Data: refer to page Important-2 of the A113 Industrial Controls
catalogue.
ICS-2 IEC 204-1,
947; SEV 1005,
1093; VDE 0113,
➋ Operating temperature below 0°C (32°F) are based on the absence of freezing
moisture and liquids.
➋ Per IEC 947-1.
➋ UL File & Guide Number E14840.
VDE 0660, Part 200 486E, UL 508,
CSA22.2 #14
6-14
Emergency Stop Devices
Push Buttons
800 E-Stops
Product Selection—22.5mm
2-Position Push-Pull Operators, Non Illum inated—Twist-to-Release, Push-Pull
800E-15YE112
Legend Plate for 40mm Ca
40mm Trigger Action
Twist-to-Release Mushroom
40mm Twist-to-Release Mushroom
40mm Push-Pull Mushroom
Colour
O perator Material 40m m Mushroom O perator
Catalogue Num ber
Plastic
Metal
Plastic
Metal
Plastic
Metal
800EP-MTS44
800EM-MTS44
800EP-MT4
Twist-to-Release — Round (Trigger Action) !
Push-Pull Twist-to-Release — Round ➋
Push-Pull — Round ➋
Red
800EM-MT4
800ES-MP24
800EM-MP24
2-Position Trigger Action Operators, Non Illum inated—Key Release ➋
800E-16YE112
Legend Plate for 60mm Cap
40mm Key Release Mushroom
2 Position Trigger Action !
60mm Key Release Mushroom
Colour
Mushroom O perator
Size
Catalogue Num ber
800EP-MKR44
40mm—Round
Ronis Key Lock
60mm—Round
40mm—Round
60mm—Round
800EP-MKR64
800EP-MKZ44
800EP-MKZ64
Red
Zadi Key Lock
Back-of-Panel Com ponents, Non Illum inated Operators
Mounting Latch and
Contact Block Com bination
Mounting
Contact ➋➋
Catalogue Num ber
800E-2LX01L
1 N.C. Late break
1 N.O. - 1 N.C. Late break
1 N.C. Late break
2-Across
3-Across
2-Across
3-Across
800E-2LX11L
800E-3LX01L
800E-3LX11L
1 N.O. - 1 N.C. Late break
800E-2LX01LS
800E-3LX01S
2-Across
3-Across
1 N.C. Self-monitoring
!
Trigger action operators are compliant with EN418 standards using standard N.C., N.C. Late Break, or N.C. Self-Monitoring contact blocks. Key Release operators are
IP66, Type 4/13.
➋ Emergency stop push buttons are compliant with EN 418 standard when using N.C. Late break (N.C.L.B.) contact blocks.
➋ Key release operators are IP66, Type 4 and 13.
6-15
Emergency Stop Devices
Push Buttons
800 E-Stops
Product Selection—22.5mm
2-Position Red Push-Pull O perators, Illum inated —Mushroom ➋
800E-15YE112
Legend Plate for 40mm Cap
40mm Mushroom Push-Pull
O perator Material
60mm Jumbo Mushroom Push-Pull
Size
Catalogue Num ber
800ES-LMP24
800ES-LMJP24
800EM-LMP24
800EM-LMJP24
40mm
60mm
40mm
60mm
Plastic
Metal
Back-of-Panel Com ponents,
Illum inated O perators
Mounting
Type
Volts
Catalogue Num ber
800E-2DL3
800E-2DL5
800E-2DL3R
800E-2DL5R
800E-3DL3
800E-3DL5
800E-3DL3R
2-Across
(5 ckts. m ax.)
24 AC/DC
3-Across
(4 ckts. m ax.)
Incandescent
120 AC/DC
24 AC/DC
120 AC
2-Across
LED (red)
24 AC/DC
120 AC/DC
24 AC/DC
Incandescent
LED (red)
3-Across
Full Voltage Power Module with Latch
800E-3DL5R
800E-2TL5
120 AC
24 AC/DC
120 AC/DC
24 AC/DC
120 AC
Incandescent
LED (red)
3-Across
(2 ckts. m ax.)
2-Across (3 ckts. m ax.)
800E-2TL7
800E-2TL5R
800E-2TL7R
800E-3TL5
800E-3TL7
800E-3TL5R
2-Across
3-Across
24 AC/DC
120 AC/DC
24 AC/DC
Incandescent
LED (red)
Transformer Power Module with Latch
2-Across 3-Across
800E-3TL7R
120 AC
800E-2X01L
2-Across
3-Across
1 N.C. Late break
Late Break !
800E-3X01L
Contact Blocks
!
Emergency stop push buttons are compliant with EN 418 standard when using N.C.L.B. contact blocks.
6-16
Emergency Stop Devices
Push Buttons
800 E-Stops !
Specifications—30.5mm
Electrical Ratings
Dielectric strength
2200V for one minute
Electrical design life cycles 1,000,000 at max. rated load
Mechanical Ratings
Vibration
10 to 2000Hz 1.52mm displacement
(peak-to-peak) max./10g max. (except
Logic Reed)
Shock
1/2 cycle sine wave for 11ms ≥25g
(contact fragility) and no damage at 100g
Type 1, 4, 4X, 12, 13; watertight/oiltight
IEC 529 IP66/65
Degree of protection
Mechanical design life
cycles
250,000 min.
(Push-pull/twist-to-release)
Contact operation
Shallow, mini, and low voltage contact
blocks: Slow, double make and break.
7.5lbs max. push or pull
Typical operating forces
2-position push-pull
Environm ent
Temperature range
Operating➋
Storage
-40°C to +55°C (-40°F to +131°F)
-40°C to +85°C (-40°F to +185°F)
Standard Contact Ratings
Maximum thermal continuous current Ith 10A AC/2.5A DC.
Bulletin 800T units with 800T-XA contacts have ratings as follows:
Max.
O pertnl.
Volts Ue
Utilization
Categor y
Rated O perational Currents
IEC
NEMA Volts Ue
Make
Break
720VA
720VA
10A
120 to 600 7200VA
AC 600
DC 600
AC-15
A600
Q600
72 to 120
24 to 72
60A
60A
28 to 600
24 to 28 ➋
69VA
2.5A
DC-13
!
Performance Data: see publication A113, page Important-2.
➋ Operating temperatures below freezing are based on the absence of moisture
and liquids.
➋ For applications below 24V/24mA, PenTUFF contacts are recommended.
6-17
Emergency Stop Devices
Push Buttons
800 E-Stops
Product Selection—30.5mm
Em ergency Stop Operators — 2-Position Red Non Illum inated
2-Position Push-Pull/Twist
2-Position Push-Pull
O perator Position
Enclosure
Protection
Contacts Maintained Out Maintained In
Release
Catalogue Num ber
800T-FX6D4
Push-Pull
Type 4 & 13
N.C.L.B. ! Closed Open
800T-FXT6D4
Push-Pull/Twist
800H-FRXT6D4
800T-FX6A1
Type 4, 4X & 13
Type 4 & 13
Push-Pull
Push-Pull/Twist
Push-Pull
N.O. Open Closed
N.C.L.B. ! Closed Open
800T-FXT6A1
800H-FRXT6A1
800T-FX6A5
Type 4, 4X & 13
Type 4 & 13
N.C.L.B.! Closed Open
N.C.L.B.! Closed Open
800T-FXT6A5
Push-Pull/Twist
Push-Pull
800H-FRXT6A5
800TC-FX6D4S
800TC-FXT6D4S
800HC-FRXT6D4S
800TC-FX6A1S
800TC-FXT6A1S
800HC-FRXT6A1S
800TC-FX6A5S
800TC-FXT6A5S
800HC-FRXT6A5S
Type 4, 4X & 13
Type 4 & 13
S.M.C.B. ➋➋ Closed Open
Push-Pull/Twist
Push-Pull
Type 4, 4X & 13
Type 4 & 13
N.O. Open Closed
S.M.C.B. ➋➋ Closed Open
Push-Pull/Twist
Push-Pull
Type 4, 4X & 13
Type 4 & 13
S.M.C.B. Closed Open
S.M.C.B.➋➋ Closed Open
Push-Pull/Twist
Type 4, 4X & 13
Note: Emergency stop push buttons are compliant with EN-418 and IEC 60947-5-5 Standards when using N.C.L.B. contact blocks.
➋ Normally closed late break contact. When button is pushed from the OUT to IN position, the mechanical detent action of the operator occurs before electrical contacts
change state. When the button is pulled from the IN to the OUT position, the electrical contacts change state before the mechanical detent occurs.
➋ The Self-Monitoring Contact Block (S.M.C.B.) is composed of a N.C.L.B. contact wired in series with a N.O. monitoring contact. The N.O. monitoring contact automatically
closes when the S.M.C.B. is properly installed onto the E-Stop operator. If the S.M.C.B. is separated from the E-Stop operator, the N.O. monitoring contact will
automatically open.
6-18
Emergency Stop Devices
Push Buttons
800 E-Stops
Product Selection—30.5mm
2-Position Red Illum inated, Push-Pull and Push-Pull/Twist Release Units
Illuminated 2-Position Push-Pull/Twist
Illuminated 2-Position Push-Pull
O perator Position
Maintained Maintained
Enclosure
Protection
Contacts
N.O.
O ut
In
Type
La m p
Vo lts
Release
Catalogue Num ber
800T-FXQ 10RA1
Push-Pull
N.C.L.B.➋➋
Type 4 & 13
120
AC/DC
800T-FXTQ 10RA1
Push-Pull/
Twist
Type 4, 4X &
13
800H-FRXTQ 10RA1
Incan-descent
800T-FXQ 24RA1
800T-FXTQ 24RA1
Push-Pull
Type 4 & 13
24
AC/DC
Push-Pull/
Twist
Type 4, 4X &
13
800H-FRXTQ 24RA1
Full
Voltage
800T-FXQ H10RA1
800T-FXTQ H10RA1
Push-Pull
Type 4 & 13
120 AC
Push-Pull/
Twist
Type 4, 4X &
13
800H-FRXTQ H10RA1
LED
Incan-descent
LED
800T-FXQ H24RA1
800T-FXTQ H24RA1
Push-Pull
Type 4 & 13
24
AC/DC
Push-Pull/
Twist
Type 4, 4X &
13
800H-FRXTQ H24RA1
Open
Closed
Closed
Open
800T-FXP16RA1
800T-FXTP16RA1
Push-Pull
Type 4 & 13
120
AC
Push-Pull/
Twist
Type 4, 4X &
13
800H-FRXTP16RA1
800T-FXP26RA1
800T-FXTP26RA1
Type 4 & 13
Push-Pull
240
AC
Type 4, 4X & Push-Pull/
800H-FRXTP26RA1
13
Twist
Trans-
former
800T-FXPH16RA1
800T-FXTPH16RA1
Type 4 & 13
Push-Pull
120 AC
Type 4, 4X & Push-Pull/
800H-FRXTPH16RA1
13
Twist
800T-FXPH26RA1
800T-FXTPH26RA1
Type 4 & 13
Push-Pull
240
AC
Type 4, 4X & Push-Pull/
13 Twist
800H-FRXTPH26RA1
Note: A jumbo or large legend plate is recommended if space allows.
Note: Emergency stop push buttons are compliant with EN-418 and IEC 60947-5-5 Standards when using N.C.L.B. contact blocks.
➋ Normally closed late break contact. When button is pushed from the OUT to IN position, the mechanical detent action of the operator occurs before electrical contacts
change state. When the button is pulled from the IN to the OUT position, the electrical contacts change state before the mechanical detent occurs.
➋ Consult your local Allen-Bradley sales office for availability of illuminated E-Stops with Self Monitoring Contact Blocks (S.M.C.B.s).
6-19
Emergency Stop Devices
Push Buttons
800 E-Stops
Accessories
Catalogue
Num ber
Typ e
Styl e
Co lou r
800E-1PY
800E-2PY
800E-3PY
800E-5PY
1 Hole
Enclosure
Plastic
(IP66, NEMA 4/4X/13
Base Mount
For use with 22.5mm
Push Buttons
2 Hole
3 Hole
5 Hole
Yellow
For 800E Buttons
Aluminum
800E-19AE100
800E-15YE112
Square Legend Plate
Aluminum, Blank
40mm Circular Legend Plate
60mm Circular Legend Plate
Yellow,
Emergency Stop
For 800 E Buttons
For 800T Buttons
For 800H
800E-16YE112
800T-X646
Yellow, Blank
Yellow,
Emergency Stop
800T-X646EM
800H-W 690
Circular Legend Plate
Yellow, Blank
6-20
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明