C01620D00311012 [AMPHENOL]
Circular DIN Connector;型号: | C01620D00311012 |
厂家: | Amphenol |
描述: | Circular DIN Connector |
文件: | 总20页 (文件大小:2062K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Amphenol
Amphenol-Tuchel Electronics GmbH
eco matem
|
Circular Connectors
www.industrial-amphenol.com
The Company
Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol
Corporation. With our own global presence we offer our customers exceptional
technical support and worldwide service in the areas of development, production and
distribution. Amphenol-Tuchel Electronics GmbH has a successful history
as a partner to our customers and sets standards for connector technology.
Quality
From the beginning of the development process, Amphenol-Tuchel Electronics GmbH
gives quality considerations the top priority. Meeting customer requirements is
the main focus of the product development process.
Interdisciplinary project teams with diverse backgrounds from marketing, product
engineering and production guarantee the development and production of robust and
reliable connector solutions.
Our quality assessment begins with the initial contact to the customer and extends
through the life of the product. A satisfied customer is the measure of our success.
We strive to use environmentally friendly processes that minimize the waste of natural
resources and introduction of toxins into the environment.
Certifications:
TS 16949
ISO 14001
ISO 9000:2000
General information
This catalogue must not be used in any form
or manner without our prior approval in writing
(Copyright Law, Fair Trading Law, Civil Code).
is a registered trademark.
Usage or modification is not allowed without
written permission of Amphenol-Tuchel.
We reserve the right to change the design due
to improvement in quality, development or
production requirements.
This release replaces all former releases.
2
Amphenol
clamping ring
• Strain relief and mounted gasket
all in one component
• Ergonomically shaped handle for
a better grip and safer handling
• Fastening for the protective caps
on the receptacle housing
• One cable housing for all cable
diameters (6 mm - 12,5 mm)
Content
Page
General Information
2
Product Description
4
Technical Data
5
5
Derating Curves / Order Information
Products
6
Technical Data 600V - Version
Products 600V - Version
Crimp Contacts
8
9
10
11
12
13
Accessories
Mounting Instructions
Technical Information
Remarks / Safety Classification
Summary of Part Numbers
16
17
Amphenol
3
Product Description
Product Description
In design and conception the
program meets the high
Advantages:
requirements for applications in industrial technology. Easy operation,
reduced dimensions and a more robust design are only a few of
the features of the series.
• Quick and easy assembly
• Screwed cable gland with clamping ring
• Strain relief and mounted gasket all in one component
• Cable housing, straight or angled, for the cable diameter 6 - 12,5 mm
• Robust thread for the screwed cable gland
The connector’s main area of application is in the fields of plant
construction and machine building. The connector is used for measuring
and controlling applications as well as for power supply.
technology. The series is comprised of a large selection of housings
and shapes and offers models with screw, solder and crimp
termination.
• Ergonomically designed product range for safe handling
• Pre-loaded ground contact
• Fastening for the protective caps on the housing of the receptacles
• The
program is compatible with the C16-1 series
Additional standards:
Features:
• The 6+PE model corresponds to DIN 9684-1 interface to the signal
transmission on inside cabin applications for agricultural machines
and tractors
• Circular Connectors with 3+PE and 6+PE contacts
• Housing components made from premium molding material
• Cable housing straight or angled
• Protection class IP 65/67 in mated condition in accordance with DIN EN 60526
• Clamping ring or internal strain relief
Testhouse
Characteristics
VDE
3+PE, 400 V, 16 A
6+PE, 250 V, 10 A (solder version)
6+PE, 250 V, 13 A (crimp version)
SEV
UL 1)
CSA
3+PE, 400 V, 16 A
6+PE, 250 V, 10 A (solder version)
6+PE, 250 V, 13 A (crimp version)
3+PE, 400V, 16A
6+PE, 250V, 13A
3+PE, 250 V, 12 A
6+PE, 250 V, 8 A
In general approvals refer to versions of the connector series. Test report upon request.
1) Please refer to „Conditions of Acceptability“
4
Amphenol
Technical Data
General Characteristics
Standard
Characteristics
Number of contacts
3 + PE
6 + PE
View on male mating side
Electrical Characteristics
screw type
solder type
250 V
crimp type
Rated voltage
DIN EN 60664-1 1)
400 V
250 V
DIN EN 60664-1 1)
DIN EN 60664-1 1)
6000 V
4000 V
Rated impulse withstand voltage
Pollution degree
3
3
DIN EN 60664-1 1)
DIN EN 60664-1 1)
III
II
Installation (overvoltage) category
Material group
III
II
Current carrying capacity
Insulation resistance
Contact resistance
12 A/ + 55 °C
13 A / + 55 °C
DIN EN 60512-5-2, Test 5b
DIN EN 60512-3-1, Test 3a
DIN EN 60512, Test 2a
16 A / + 55 °C
≥ 108 Ω
≤ 5 m Ω
≥ 108 Ω
≤ 5 m Ω
Climatic Characteristics
Climatic category
DIN EN 60068-1
40 / 100 / 56
40 / 125 / 56
Operating temperature
-40°C ... +100°C
-40°C ... +125°C
Mechanical Characteristics
Degree of protection
Insertion and withdrawal force
Mechanical operation
Materials
IP 65 / IP 67
DIN EN 60529
≤ 15 N
≤ 30 N
DINꢀEN 60512-13-2, Test 13b
DINꢀEN 60512, Test 9a
≥ 500 mating cycles
PA 6.6 / PA 6
PA 6.6 / PA 6
Neopren
Housing material
Dielectric material
Gasket material
Material lace for protective cap
Contact plating
TPE
silver plated / gold plated
Other Characteristics
Termination technique
Wire gauge / AWG
screw
0,75 - 2,5 mm2
solder
crimp
0,14 - 1,5 mm2
max. 0,75 mm2
AWG 18
AWG 18-14
AWG 26 - 16
UL 94
VO
round thread
Flammability
Locking system
1)
^
^
DINꢀEN 60664-1 = VDE 0110-1 = IEC 60664-1
The stated technical values refer to the use as connector without breaking capacity (COC). If these components are used as plug and socket device a
reduced current carrying capacity has to be considered. The characteristics have to be requested from the manufacturer.
Derating Curves
30,0
30,0
25,0
20,0
15,0
10,0
5,0
No. of contacts 3 + PE
No. of contacts 6 + PE
25,0
20,0
15,0
10,0
5,0
all contacts under load
a) wire gauge 2,5 mm²
b) wire gauge 1,5 mm²
all contacts under load
a) wire gauge 1,5 mm2,
stamped crimp contacts
b) wire gauge 0,75 mm2,
stamped solder contacts
a)
a)
b)
b)
0
0
20
40
80
20
40
80
Ambient6t0empera1t0u0re120
Ambient6t0empera1t0u0re120
Amphenol
5
Male Cable Connectors / Female Receptacles
Male cable connector straight
Version strain relief with
clamping ring: 6 - 12,5 mm
Version with internal cable clamping
and clamping ring: 6 - 10 mm
Part number
Part number
Internal cable clamping + clamping ring
Contact plating
Strain relief with clamping ring
Contact plating
Termination
technique
Back shell
color
No. of
contacts
Silver plated
Gold plated
Silver plated
Gold plated
C016 20H003 100 10 C016 20H003 200 10 C016 20H003 110 10 C016 20H003 210 10
C016 20H003 100 12 C016 20H003 200 12 C016 20H003 110 12 C016 20H003 210 12
C016 30H006 100 10 C016 30H006 200 10 C016 30H006 110 10 C016 30H006 210 10
C016 30H006 100 12 C016 30H006 200 12 C016 30H006 110 12 C016 30H006 210 12
C016 10H006 000 10 C016 10H006 000 10 C016 10H006 010 10 C016 10H006 010 10
C016 10H006 000 12 C016 10H006 000 12 C016 10H006 010 12 C016 10H006 010 12
screw
screw
solder
solder
crimp1)
crimp1)
blue
black
blue
black
blue
black
3 + PE
3 + PE
6 + PE
6 + PE
6 + PE
6 + PE
Male cable connector right angled,
strain relief with clamping ring
cable diameter 6 - 12,5 mm
Part number
Strain relief with clamping ring
Contact plating
Termination
technique
Back shell
color
No. of
contacts
Silver plated
Gold plated
C016 20K003 100 10 C016 20K003 200 10
C016 20K003 100 12 C016 20K003 200 12
C016 30K006 100 10 C016 30K006 200 10
C016 30K006 100 12 C016 30K006 200 12
C016 10K006 000 10 C016 10K006 000 10
C016 10K006 000 12 C016 10K006 000 12
3 + PE
3 + PE
6 + PE
6 + PE
6 + PE
6 + PE
screw
screw
solder
solder
crimp1)
crimp1)
blue
black
blue
black
blue
black
Female receptacle, screw termination
(3+PE), solder termination or
crimp version (6+PE)
Dimension A
Screw version: 13,5 mm
Solder version: 14,2 mm
Crimp version: 16,5 mm
Mounting
cut-out2)
Part number
Contact plating
No. of
Termination
technique
screw
solder
crimp1)
Back shell
color
For sealing reason
this surface needs
to be level and
free of burrs.
contacts
Silver plated
Gold plated
C016 20G003 100 12 C016 20G003 200 12
3 + PE
6 + PE
6 + PE
black
black
black
C016 30G006 200 12
C016 10G006 000 12
C016 30G006 100 12
C016 10G006 000 12
1) Crimp contacts see page 10 / Crimp tooling see catalogue “Tools”.
2) Mounting hole Ø 22 without chamfer, suitable sealing for screws is necessary. Tightening torque 0,8Nm.
6
Amphenol
Female Cable Connectors / Male Receptacles
Female cable connector straight
Version strain relief with
clamping ring: 6 - 12,5 mm
Version with internal cable clamping
and clamping ring: 6 - 10 mm
Part number
Part number
Internal cable clamping + clamping ring
Contact plating
Strain relief with clamping ring
Contact plating
Termination
technique
Back shell
color
No. of
contacts
Gold plated
Silver plated
Silver plated
Gold plated
blue
black
blue
black
blue
black
3 + PE
3 + PE
6 + PE
6 + PE
6 + PE
6 + PE
screw
screw
solder
solder
crimp1)
C016 20D003 100 10 C016 20D003 200 10 C016 20D003 110 10 C016 20D003 210 10
C016 20D003 100 12 C016 20D003 200 12 C016 20D003 110 12 C016 20D003 210 12
C016 30D006 100 10 C016 30D006 200 10 C016 30D006 110 10 C016 30D006 210 10
C016 30D006 100 12 C016 30D006 200 12 C016 30D006 110 12 C016 30D006 210 12
C016 10D006 000 10 C016 10D006 000 10 C016 10D006 010 10 C016 10D006 010 10
C016 10D006 000 12 C016 10D006 000 12 C016 10D006 010 12 C016 10D006 010 12
crimp1
)
Female cable connector right angled,
strain relief with clamping ring
cable diameter 6 - 12,5 mm
Part number
Strain relief with clamping ring
Contact plating
Termination
technique
Back shell
color
No. of
contacts
Silver plated
Gold plated
blue
black
blue
black
blue
black
C016 20F003 100 10 C016 20F003 200 10
C016 20F003 100 12 C016 20F003 200 12
C016 30F006 100 10 C016 30F006 200 10
C016 30F006 100 12 C016 30F006 200 12
C016 10F006 000 10 C016 10F006 000 10
C016 10F006 000 12 C016 10F006 000 12
3 + PE
3 + PE
6 + PE
6 + PE
6 + PE
6 + PE
screw
screw
solder
solder
crimp1)
crimp1)
Male receptacle, screw termination
(3+PE), solder termination or
crimp version (6+PE)
Dimension A
Screw version: 14,0 mm
Solder version: 12,0 mm
Crimp version: 16,5 mm
Mounting
cut-out2)
Part number
Contact plating
No. of
contacts
Termination
technique
Back shell
color
For sealing reason
this surface needs
to be level and
free of burrs.
Silver plated
Gold plated
black
black
black
C016 20C003 100 12 C016 20C003 200 12
3 + PE
6 + PE
6 + PE
screw
solder
crimp1)
C016 30C006 100 12 C016 30C006 200 12
C016 10C006 000 12
C016 10C006 000 12
1) Crimp contacts see page 10 / Crimp tooling see catalogue “Tools”.
2) Mounting hole Ø 22 without chamfer, suitable sealing for screws is necessary. Tightening torque 0,8 Nm.
Amphenol
7
High Voltage
Technical Data
General Characteristics
Standard
Characteristics
Number of contacts
3 + PE
6 + PE
View on male mating side
Electrical Characteristics
crimp type
600 V
Rated voltage
DIN EN 60664-1 1)
DIN EN 60664-1 1)
DIN EN 60664-1 1)
DIN EN 60664-1 1)
DIN EN 60664-1 1)
6000 V
3 (mated)
III
Rated impulse withstand voltage
Pollution degree
Installation (overvoltage) category
Material group
II
Current carrying capacity
Insulation resistance
Contact resistance
14 A / + 40 °C
≥ 108 Ω
≤ 5 m Ω
DIN EN 60512-5-2, Test 5b
DIN EN 60512-3-1, Test 3a
DIN EN 60512, Test 2a
Climatic Characteristics
Climatic category
DIN EN 60068-1
40 / 125 / 56
Operating temperature
-40°C ... +125°C
Mechanical Characteristics
Degree of protection
Insertion and withdrawal force
Mechanical operation
Materials
IP 65
DIN EN 60529
≤ 35 N
DINꢀEN 60512-13-2, Test 13b
DINꢀEN 60512, Test 9a
≥ 500 mating cycles
PA 6.6 / PA 6
PA 6.6 / PA 6
Housing material
Dielectric material
Gasket material
Neopren
Contact plating
silver plated / gold plated
Other Characteristics
Termination technique
Wire gauge / AWG
crimp
0,14 - 1,5 mm2
AWG 26 - 16
UL 94
VO
Flammability
round thread
Locking system
1)
^
^
DINꢀEN 60664-1 = VDE 0110-1 = IEC 60664-1
The stated technical values refer to the use as connector without breaking capacity (COC). If these components are used as plug and socket device a
reduced current carrying capacity has to be considered. The characteristics have to be requested from the manufacturer.
Derating Curves
Testhouse
Characteristics
30,0
25,0
3+PE, 600 V, 13 A at AWG 16
3+PE, 600 V, 5 A at AWG 26
6+PE, 600 V, 13 A at AWG 16
6+PE, 600 V, 5 A at AWG 26
3+PE, 600 V, 10,5 A at AWG 16
6+PE, 600 V, 10,5 A at AWG 16
No. of contacts 6 + PE
UL 1)
all contacts under load
wire gauge 1,5 mm2,
stamped crimp contacts
20,0
15,0
10,0
5,0
CSA
0
In general approvals refer to versions of the connector series. Test report
upon request.
20
40
60
80 100 120
Ambient temperature
1) Please refer to „Conditions of Acceptability“
8
Amphenol
High Voltage
Female Cable Connectors / Male Receptacles
Female cable connector straight,
with clamping ring,
cable diameter 6 - 12,5 mm
Termination
No. of
Back shell
color
black
black
Part number
technique
contacts
Strain relief with clamping ring
3 + PE
6 + PE
crimp1)
C016 10D003 806 12
C016 10D006 806 12
crimp1)
Male receptacle,
crimp version
Mounting
cut-out
No. of
Termination
technique
Back shell
color
black
Part number
For sealing reason
this surface needs
to be level and
free of burrs.
contacts
crimp1)
C016 10P003 806 12
C016 10P006 806 12
3 + PE
6 + PE
crimp1)
black
1) Crimp contacts see page 10 / Crimp tooling see catalogue “Tools”.
2) Tightening torque 4 -5 Nm.
* standard dust cups don’t fit on high voltage versions special caps upon request
* Thread size M20 x 1,5 2)
* If turn protection is required, we recommend to glue receptacles
Amphenol
9
Crimp Contacts
Stamped single contacts
Stamped contacts on reel
for hand crimping tools
200 pcs.
Stamped contacts on reel for crimping machines
2000 pcs. feeds to the left
2000 pcs. feeds to the right
Crimp Contacts, Pin for Standard Versions
Contact Ø
in mm
Insulation Ø
in mm
No. of
Wire
Supplied
as
Pieces
Part number
Contact plating
Silver plated Gold plated
contacts gauge
1,6
1,6
1,0 - 2,0
1,8 - 2,8
6 + PE
6 + PE
0,14 - 0,5 mm2 Single contact
Contact on reel 200
100
VN 01 016 0011 (1)
ZN 01 016 0011 (1)
HN 01 016 0011 (1)
TN 01 016 0011 (1)
VN 01 016 0004 (1)
ZN 01 016 0004 (1)
HN 01 016 0004 (1)
TN 01 016 0004 (1)
VN 01 016 0011 (2)
ZN 01 016 0011 (2)
HN 01 016 0011 (2)
TN 01 016 0011 (2)
VN 01 016 0004 (2)
ZN 01 016 0004 (2)
HN 01 016 0004 (2)
TN 01 016 0004 (2)
right
2000
2000
100
left
0,5 - 1,5 mm2
Single contact
Contact on reel 200
right
left
2000
2000
Crimp Contacts, Pin for High Voltage Versions
Contact Ø
in mm
Insulation Ø
in mm
No. of
Wire
Supplied
as
Pieces
Part number
Contact plating
contacts gauge
Silver plated
Gold plated
1,6
1,6
1,0 - 2,0
1,8 - 2,8
6 + PE
6 + PE
0,14 - 0,5 mm2 Single contact
100
VN 01 016 0003 (1)
ZN 01 016 0003 (1)
HN 01 016 0003 (1)
TN 01 016 0003 (1)
VN 01 016 0002 (1)
ZN 01 016 0002 (1)
HN 01 016 0002 (1)
TN 01 016 0002 (1)
VN 01 016 0003 (2)
ZN 01 016 0003 (2)
HN 01 016 0003 (2)
TN 01 016 0003 (2)
VN 01 016 0002 (2)
ZN 01 016 0002 (2)
HN 01 016 0002 (2)
TN 01 016 0002 (2)
Contact on reel 200
right
left
2000
2000
100
0,5 - 1,5 mm2
Single contact
Contact on reel 200
right
left
2000
2000
Crimp Contacts, Socket for Standard and High Voltage Version
Contact Ø
in mm
Insulation Ø
in mm
No. of
Wire
Supplied
as
Pieces
Part number
Contact plating
contacts gauge
Silver plated
Gold plated
1,6
1,6
1,0 - 2,0
1,8 - 2,8
6 + PE
6 + PE
0,14 - 0,5 mm2 Single contact
100
VN 02 016 0003 (1)
ZN 02 016 0003 (1)
HN 02 016 0003 (1)
TN 02 016 0003 (1)
VN 02 016 0002 (1)
ZN 02 016 0002 (1)
HN 02 016 0002 (1)
TN 02 016 0002 (1)
VN 02 016 0003 (2)
ZN 02 016 0003 (2)
HN 02 016 0003 (2)
TN 02 016 0003 (2)
VN 02 016 0002 (2)
ZN 02 016 0002 (2)
HN 02 016 0002 (2)
TN 02 016 0002 (2)
Contact on reel 200
right
left
2000
2000
100
0,5 - 1,5 mm2
Single contact
Contact on reel 200
right
left
2000
2000
Find our tools in the catalogue “Tools”.
10
Amphenol
Accessories
Description
Figure
Part number
Figure
Part number
Protecitve cover for male cable
connector and male receptacle
for male cable
connector
for male receptacle
C016 00U000 000 12
C016 00U000 010 12
Protective cover for female
cable connector and female
receptacle
for female cable
connector
for female receptacle
C016 00V000 000 12
C016 00V000 010 12
Protective caps for 600V version upon request
Mounting of the protective covers on the back shell, male or female receptacles
Description
Figure
Part number
Back shell,
right angled with clamping ring
Packaging unit 10 pcs.
Back shell color:
1)
blue:
C016 G09 042 G10 X
black:
C016 G09 041 G10 X 1)
Cable clamp
for all straight cable connectors,
Packaging units 10 pcs.
Cable clamp diameter
Ø 6 - 10 mm
1)
N 16 110 2000 X
1) X is synonymous for packaging unit 10 pcs.
Amphenol
11
Mounting Instructions
Mounting Instruction, straight cable connector
Stripping Lengths
Screw contacts
Measure a 1) Measure b
pay attention at keying
2)
2)
with internal cable clamping
18+1
7+1
7+1
without internal cable clamping 25+1
Solder contacts
with internal cable clamping
14+1
4+1
4+1
without internal cable clamping 22+1
Crimp contacts 0,14 – 0,50 mm2
3+0,5
clamping ring with mounted gasket
0,50 – 1,5 mm2
3,5+1
14+1
22+1
back shell
with internal cable clamping
without internal cable clamping
tightening torque
1,5 - 2 Nm
1) PE + 2mm 2) end splice recommended
internal
cable clamping
additionally
included gasket
male contact
TR 22 x 2
insert with
locking ring
cable nut
tightening torque
1,5 - 2 Nm 1)
tightening torque max. 0,3 Nm 1)
female contact
insert with
locking ring
Mounting Instruction, right angled cable connector
Stripping Lengths
Measure a 1) Measure b
Screw contacts
2)
without internal cable clamping 35+1
7+1
4+1
pay attention at keying
Solder contacts
without internal cable clamping 32+1
3+0,5
Crimp contacts
0,14 – 0,5 mm2
3,5+1
0,50 – 1,5 mm2
32+1
without internal cable clamping
1) PE + 2mm 2) end splice recommended
right angled back shell
tightening torque
1 - 2 Nm
clamping ring with
mounted gasket
male contact
insert with
locking ring
TR 22 x 2
shell
cable nut
tightening torque
additionally
included
gasket
female contact
insert with
locking ring
1,5 - 2 Nm 1)
1) The tightening torque figures can vary depending on the cable you use.
12
Amphenol
Technical Information
Order Information
Color coding
Crimp version
Backshells of cable connectors are available in different colors upon
request. Min order quantity = 1000 pcs. per type.
Order number do not include crimp contacts. Please order separately (see
page 10).
Mechanical coding
Achieved by special coding pins which are inserted into contact cavities.
Min. order quantitiy = 1000 pcs. per type.
Crimp tooling
Ask for our catalogue “Tools”
Aufbau der Bestellnummer
C016
30
D
006
1
00
10
Version
Serie
10 = Cable connector in blue/black
12 = Cable connector or receptacle in black
Termination Technique
10= Crimp (6 + PE)
20= Screw (3 + PE)
30= Solder (6 + PE)
Strain relief
Contact Plating
1 = silver plated
2 = gold plated
00 = Receptacle or
Number of Poles
003 = 3 + PE
cable connector with clamping ring
10 = Cable connector with internal
cable clamp
0 = without contacts
006 = 6 + PE
Style
H = Male cable connector
D = Female cable connector
K = Right angled male cable connector
F = Right angled female cable connector
C = Male receptacle
The example shows a female
cable connector 6 + PE.
G = Female receptacle
P = Male receptacle
Screw Termination
Screw clamps are designed acc. to EN 60999-1/VDE
06095.1. Chart 1 below shows the screw size depending
on wire size and the required clamping and testing
torque.
Chart 2
AWG Wire composition Wire diameter Wire size
30
28
26
1 x 0,25
7 x 0,10
1 x 0,32
7 x 0,13
1 x 0,40
7 x 0,16
19 x 0,10
0,25 mm
0,36 mm
0,32 mm
0,38 mm
0,40 mm
0,48 mm
0,51 mm
0,05 mm2
0,06 mm2
Chart 1
0,08 mm2
0,09 mm2
Wire size (mm2)
1,5
M 3
2,5
M 3
0,13 mm2
0,14 mm2
0,15 mm2
Screw size
Test torque (Ncm)
max. 50
max. 50
24
22
20
18
1 x 0,51
7 x 0,20
19 x 0,13
1 x 0,64
7 x 0,25
19 x 0,16
1 x 0,81
7 x 0,32
19 x 0,20
0,51 mm
0,61 mm
0,64 mm
0,64 mm
0,76 mm
0,81 mm
0,81 mm
0,97 mm
1,02 mm
1,02 mm
1,27 mm
0,21 mm2
0,23 mm2
0,24 mm2
0,33 mm2
0,36 mm2
0,38 mm2
Diagram 1 below shows the range of tensile strength for a screw
connection with a clamp screw M3, fastened with a torque of 50 Ncm,
depending on the wire size.
Diagram 1
0,52 mm2
0,56 mm2
0,62 mm2
1 x 1,02
19 x 0,25
0,79 mm2
0,96 mm2
16
14
12
10
8
19 x 0,29
19 x 0,36
19 x 0,46
37 x 0,40
133 x 0,29
133 x 0,36
1,44 mm
1,80 mm
2,29 mm
3,10 mm
4,0 mm
1,23 mm2
1,95 mm2
3,09 mm2
4,60 mm2
8,80 mm2
13,5 mm2
Wire gauge
6
5,5 mm
This comparison chart allows a cross reference between American Wire
Gauge (AWG) and metric wire sizes (mm2).
It is to be noted that wires of the same AWG number but with different
composition have slightly different mm2.
Amphenol
13
Technical Information
Crimp Termination
Assembly instructions
A crimp connection is a non-detachable electrical connection between a
wire and a crimp contact produced with the crimp technology.
Precise crimping dies which are matched to the crimp barrel and the
wire size and a defined deformation result in a reliable electrical
connection.
For crimp contacts use the released crimp tool.
The insertion and extraction of crimp contacts shall only be approved with
the corresponding insertion/extraction tool.
There are open crimp barrels (stamped contacts) and closed crimp
barrels (turned contacts).
A detailed description of the crimp technology can be found in
our crimp tooling catalogues.
The main advantages of crimp connections are:
• Efficient termination of contacts
Crimp contacts are in this catalogue on page 10.
• Reproducible terminations achieve consistent
electrical and mechanical results
The requirements for crimp connections are defined
in IEC 60352 Part 2 / DIN EN 60352 Part 2.
An important point of the quality of a crimp connection is the achieved
tensile strength of the termination.
Easily measured, the tensile strength is a practible means for quality
control purposes.
Diagram 2 below shows the required minimum tensile strength for open
and closed barrels depending on the wire size.
Diagram 2
N
lb
1000
4000
3000
500
400
2000
300
200
1000
500
400
100
300
50
40
200
30
100
20
50
40
10
5
30
20
mm2 0,05
AWG
0,1
28
0,2
24
0,5
20
1,0 1,5
16
14
2,5
4,0 6,0 10,0
8
26
22
12
10
18
Wire gauge in mm2 / AWG
14
Amphenol
Technical Information
Degree of Protection
Electrical devices to which connectors belong to have to be protected for
safety reasons from outside influences like dust, foreign objects, direct
contact, moisture and water. This protection is provided on industrial
connectors by its housings with their latching devices and sealed cable
entries. The degree of protection can be selected depending on the type of
intended use. The standard IEC 60529 and/or DIN EN 60529/VDE 0470
Part 1 has specified the degree of protection and divided into several classes.
Chart 5
2nd charact. Brief description
numeral
Definition
0
1
Non-protected
–
Protected against vertically Vertically falling drops shall
falling water drops
have no harmful effects.
The degree of protection is indicated in the following way:
IP65
2
Code letters
Protected against vertically
Vertically falling drops shall
(Internat. Protection)
falling water drops when have no harmful effects when
enclosure tilted up to 15°
the enclosure is tilted at any
angel up to 15° on either side
of the vertical.
1st charact. numeral (degree of protection against access
to hazardous parts and against solid foreign objects)
2nd charact. numeral (degree of protection against ingress of water)
The following charts 4 an 5 give an overview about all protection degrees.
3
Protected against spraying
water
Water sprayed at an angle up
to 60° on either side of the
vertical shall have no harmful
effects.
Chart 4
1st charact. Brief description
numeral
Definition
4
5
6
Water splashed against the
enclosure from any direction
shall have no harmful effects.
Protected against splashing
water
0
Non-protected
–
1
Protected against access to The probe, sphere of 50mm
hazardous parts with the back Ø, shall not fully penetrate and
of a hand. Protected against shall have adequate clearance
Water projected in jets against
the enclosure from any
direction shall have no harmful
effects.
Protected against water jets
solid foreign objects of
≥ 50mm Ø.
from hazardous parts.
Water projected in powerful
jets against the enclosure
from any direction shall have
no harmful effects.
Protected against powerful
water jets
The jointed test finger of
12mm Ø, 80mm length,
shall have adequate clearance
from hazardous parts. The
probe, sphere of 12,5mm Ø,
shall not fully penetrate.
2
Protected against access to
hazardous parts with a finger.
Protected against solid
foreign objects of
≥ 12,5mm Ø.
7
8
Intrusion of water in quantities
causing harmful effects
shall not be possible when
the enclosure is temporalily
immersed in water for 30 min.
in 1m depth.
Protected against the effects
of temporary immersion in
water
3
Protected against access
to hazardous parts with a
tool. Protected against solid
foreign objects of
The probe of 2,5mm Ø shall
not penetrate at all.
≥ 2,5mm Ø.
Protected against the effects
of continous immersion in
water
Intrusion of water in quantities
causing harmful effects shall
not be possible when the
enclosure is continuously
immersed in water under
conditions which shall be
agreed between manufacturer
and user but which are more
severe than for numeral 7.
The probe of 1mm Ø shall
not penetrate at all.
4
5
Protected against access to
hazardous parts with a wire.
Protected against solid
foreign objects of ≥ 1mm Ø.
Protected against access to The probe of 1mm Ø shall
hazardous parts with a wire. not penetrate.
Dust-protected.
Intrusion of dust is not
totally prevented, but dust shall
not penetrate in a quantity
to interfere with satisfactory
operation of the device or to
impair safety.
9K 1)
Protected against water
Water projected in powerful
during high pressure/steam jets with high pressure against
jet cleaning
the enclosure from any
direction shall have no harmful
effects.
Protected against access to The probe of 1mm Ø shall
hazardous parts with a wire not penetrate.
Dust-tight.
6
No intrussion of dust.
1) Remark: Numeral acc. to DIN 40050 part 9, vehicles IP code.
Amphenol
15
Remarks / Safety Classification
1. General Remarks
All rated data for the connectors listed in this catalogue are based on over-
voltage category III and pollution degree 3 for electronic applications if
not stated differently. Connectors were completely mated according to their
respective safety locking mechanism. Selection and testing of connectors
with / without breaking capacity to meet specific product or industrial
requirements such as rated voltage and the related clearances and creepage
distances are the responsibility of the user.
These connectors are designed and produced in conformity with the
low voltage directive (73/23/EWG) respectively Gerätesicherheitsgesetz
(German law) and are especially in accordance with the standards
DIN EN 61984 / IEC 61984 (VDE0627); IEC 60664-1 (VDE 0110-1)
and IEC 60529.
The connectors may be used only within the technical ratings.
All technical data refer to mated connectors under live conditions.
The safety of the connector system depends on the correct selection of
products, proper assembly of the connector device and a precise fit of
the connectors.
3. Assembling Remarks
Protection against electrical shock of the termination of the connectors
shall be secured by correct mounting. Connectors of the same or different
series being mounted side by side may be protected against incorrect
mating by the use of coding options. Care must be taken to ensure the
parts are correctly mated and screws are tightened with the proper torque.
2. Application Remarks
Connectors with / without breaking capacity must be used according to
specified technical ratings.
The technical data represents the initial value of mated parts under
predetermined conditions and length of time.These values could change
with different test parameters or product requirements.
4. Termination Remarks
Cable connectors are effectively secured when using the strain relief (internal
clamping ring). All cable properties or specifications must becompatible
with the connector design and materials.
The connectors of the
series are designed for the areas of
Please make sure that the usability of the cable in conjunction with the clamping
ring is given.
Designated wire conductors must be terminated to the correct poles in the
connector.
Crimp contacts must be fully inserted into the plastic housing and strain relief
assured with a slight tug on the wire.
application including the construction and installation of controlling
and electrical devices.
The product has been tested for the intended purposes only. If the
connection is used other than originally intended, or in another
manner that we have not previously tested, the consumer assumes full
responsibility.
Wire should be stripped correctly according to printed specifications to insure
no electrical contact can be made between the conductors. There should be no
nicked or cut strains during the stripping action.
16
Amphenol
Summary of Part Numbers
Part No.
Page Part No.
Page Part No.
C016 30H006 100 10
Page Part No.
TN 01 016 0011 (1)
Page
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
C016 00U000 000 12
C016 00U000 010 12
C016 00V000 000 12
C016 00V000 010 12
C016 10C006 000 12
C016 10D003 806 12
C016 10D006 000 10
C016 10D006 000 12
C016 10D006 010 10
C016 10D006 010 12
C016 10D006 806 12
C016 10F006 000 10
C016 10F006 000 12
C016 10G006 000 12
C016 10H006 000 10
C016 10H006 000 12
C016 10H006 010 10
C016 10H006 010 12
C016 10K006 000 10
C016 10K006 000 12
C016 10P003 806 12
C016 10P006 806 12
C016 20C003 100 12
C016 20C003 200 12
C016 20D003 100 10
C016 20D003 100 12
C016 20D003 110 10
C016 20D003 110 12
C016 20D003 200 10
C016 20D003 200 12
C016 20D003 210 10
C016 20D003 210 12
C016 20F003 100 10
11 C016 20F003 100 12
11 C016 20F003 200 10
11 C016 20F003 200 12
11 C016 20G003 100 12
7
7
7
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
6
6
6
6
6
6
6
6
6
6
6
6
6
6
C016 30H006 100 12
C016 30H006 110 10
C016 30H006 110 12
C016 30H006 200 10
C016 30H006 200 12
C016 30H006 210 10
C016 30H006 210 12
C016 30K006 100 10
C016 30K006 100 12
C016 30K006 200 10
C016 30K006 200 12
C016 G09 041 G10 X
C016 G09 042 G10 X
HHN 01 016 0002 (1)
HN 01 016 0002 (2)
HN 01 016 0003 (1)
HN 01 016 0003 (2)
HN 01 016 0004 (1)
HN 01 016 0004 (2)
HN 01 016 0011 (1)
HN 01 016 0011 (2)
HN 02 016 0002 (1)
HN 02 016 0002 (2)
HN 02 016 0003 (1)
HN 02 016 0003 (2)
N 16 110 2000 X
TN 01 016 0011 (2)
TN 02 016 0002 (1)
TN 02 016 0002 (2)
TN 02 016 0003 (1)
TN 02 016 0003 (2)
VN 01 016 0002 (1)
VN 01 016 0002 (2)
VN 01 016 0003 (1)
VN 01 016 0003 (2)
VN 01 016 0004 (1)
VN 01 016 0004 (2)
7
9
7
7
7
7
9
7
7
6
6
6
6
6
6
6
9
9
7
7
7
7
7
7
7
7
7
7
7
C016 20G003 200 12
C016 20H003 100 10
C016 20H003 100 12
C016 20H003 110 10
C016 20H003 110 12
C016 20H003 200 10
C016 20H003 200 12
C016 20H003 210 10
C016 20H003 210 12
C016 20K003 100 10
C016 20K003 100 12
C016 20K003 200 10
C016 20K003 200 12
C016 30C006 100 12
C016 30C006 200 12
C016 30D006 100 10
C016 30D006 100 12
C016 30D006 110 10
C016 30D006 110 12
C016 30D006 200 10
C016 30D006 200 12
C016 30D006 210 10
C016 30D006 210 12
C016 30F006 100 10
C016 30F006 100 12
C016 30F006 200 10
C016 30F006 200 12
C016 30G006 100 12
C016 30G006 200 12
11 VN 01 016 0011 (1)
11 VN 01 016 0011 (2)
10
10
10
10
10
10
10
10
10
10
10
10
11
10
10
10
10
10
10
VN 02 016 0002 (1)
VN 02 016 0002 (2)
VN 02 016 0003 (1)
VN 02 016 0003 (2)
ZN 01 016 0002 (1)
ZN 01 016 0002 (2)
ZN 01 016 0003 (1)
ZN 01 016 0003 (2)
ZN 01 016 0004 (1)
ZN 01 016 0004 (2)
ZN 01 016 0011 (1)
ZN 01 016 0011 (2)
ZN 02 016 0002 (1)
ZN 02 016 0002 (2)
ZN 02 016 0003 (1)
ZN 02 016 0003 (2)
TN 01 016 0002 (1)
TN 01 016 0002 (2)
TN 01 016 0003 (1)
TN 01 016 0003 (2)
TN 01 016 0004 (1)
TN 01 016 0004 (2)
Amphenol
17
For Notes
18
Amphenol
For Notes
Amphenol
19
International
Amphenol Argentina
Av. Callao 930
2nd Floor Office B “Plaza“
C1023 AAP Buenos Aires
Phone +54 11 4815 68 86
www.amphenol.com.ar
Argentina
Germany
Singapore
Turkey
Amphenol-Tuchel Electronics GmbH
August-Haeusser-Str. 10
74080 Heilbronn
Asia Pacific Sales Operations
72 Bendemeer Rd, No.03-32/33
Hiap Huat House, Luzerne, 339941
Singapore
Amphenol Turkey
Sun Plaza Kat: 15
Maslak Mah. Bilim Sok.No:15
34398 Sisli - Istanbul
Phone: +90 2123 679 220
www.amphenol.com.tr
Phone +49 7131 929 0
www.amphenol.de
Phone +65 6294 2128
www.amphenol.com
Australia
India
South Africa
United Kingdom
Amphenol Australia Pty. Ltd.
2 Fiveways Blvd
Amphenol Interconnect India Pvt Ltd
105, Bhosari Industrial Area
Pune – 411 026
Amphenol International Ltd
Chislehurston
Amphenol Limited
Thanet Way, Whitstable
Kent, CT53JF
Keysborough
30 Impala Road
Victoria 31 73
Phone +61 3 8796 88 88
www.amphenol.com.au
Phone +91 20 2712 04 81
www.amphenol-in.com
2196 Chislehurston
Sandton, 2146
Phone +27 11 7839 517
www.amphenol.co.za
Phone +44 1227 773 200
www.amphenol.co.uk
Brazil
Italy
Spain
USA
Amphenol do Brasil Ltda.
Rua Diogo Moreira 132, 20th Floor
CEP 05423-101 Sao Paulo SP
Phone +55 11 3815 10 03
www.amphenol.com.br
Amphenol-Tuchel Italy
Via Barbaiana n. 5
20020 Lainate (MI)
Phone +39 02 9325 41
www.amphenol.info
Amphenol Espana
Amphenol-Tuchel Electronics
6900 Haggerty Road
Suite 200
Edificio Burgosol, Oficina 55
C/Comunidad de Madrid, 35 bis
Las Rozas (Madrid), 28230
Phone +34 91 6407 302
www.amphenol.com
Canton, Michigan 48187
Phone +1 7344 516 400
www.amphenol.info
Amphenol Corporation
Corporate Headquarters
358 Hall Avenue
Wallingford, CT 06492
Phone +1 877 2674 366
Phone +1 203 2658 900
www.amphenol.com
China
Korea
Taiwan
Amphenol-Tuchel Electronics
China Branch
Amphenol DaeShin Elect and
Precision Co.,Ltd
Amphenol East Asia Limited-Taiwan
5F, No 361, Fusing 1st Rd
Gueishan Township,
20 Taishan Road
558 Songnae-Dong, Sosa-Gu
Bucheon-City, Kyunggi-Do
Korea 422-130
Phone +82 32 6103 800
www.amphenol.co.kr
Changzhou 213022
Phone +86 0519 511 03 01
www.amphenol.info
Taoyuan County 333
Phone +886 3 2647 200
www.amphenol.com
France
Mexico
Amphenol Socapex S.A.S.
948, Promenade de l’Arve, BP 29
Thyez Cedex, 74311
Amphenol Mexico
Prolongacion Reforma 61 - 6 B2
Col. Paseo de las Lomas
C.P. 01330 Mexico D.F.
Phone +52 55 5258 99 84
www.amphenolmexico.com
Phone +33 4 5089 28 00
www.amphenol-socapex.com
More Amphenol companies can be
found here: www.amphenol.com
Important Notice
All technical data have been measured in a laboratory environment and can be different during practical usage of the product. Any product information is for descriptive usage only and not legally
binding; particularly the information does not constitute or provide any legal guaranties (“Beschaffenheitsgarantie” or “Haltbarkeitsgarantie”).
We reserve the right to change the design due to improvement in quality, development or production requirements. This catalogue must not be used in any form or manner without our prior approval
in writing (Copyright Law, Fair Trading Law, Civil Code).
Your engineering sales representative:
Amphenol-Tuchel Electronics GmbH August-Haeusser Strasse 10 74080 Heilbronn, Germany
|
|
Telephone: +49 (0)7131 929-0 Fax: +49 (0)7131 929-486 www.amphenol.info
|
|
相关型号:
C01620G00310012
Circular Connector, 4 Contact(s), Polyamide66/Polyamide6, Female, Screw Terminal, Receptacle,
AMPHENOL
C01620H00310010
Circular Connector, 4 Contact(s), Polyamide66/Polyamide6, Male, Screw Terminal,
AMPHENOL
C01620H00310012
Circular Connector, 4 Contact(s), Polyamide66/Polyamide6, Male, Screw Terminal,
AMPHENOL
©2020 ICPDF网 联系我们和版权申明