C25601210MCCO [AMPHENOL]
Circular Connector, 10 Contact(s), Nickel Aluminum Bronze, Male, Crimp Terminal, Plug,;
| 型号： | C25601210MCCO |
| 厂家： | 
Amphenol |
| 描述： | Circular Connector, 10 Contact(s), Nickel Aluminum Bronze, Male, Crimp Terminal, Plug, 连接器 |
| 文件： | 总8页 (文件大小：568K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Amphenol
608 Series
Circular Environmental Connectors
Approved to BS9522 F0020 (Pattern 608)
CE30
Design Features
•
Keyway Polarisation.
•
•
•
•
•
Ni Aluminium Bronze Shells.
Threaded Anti Vibration coupling mechanism.
Crimp or Solder Contacts.
-55° to + 125° C Temp Range
High Impact Strength
The Amphenol 608 series is a range of nickel aluminium
bronze connectors with a 2 start acme thread coupling
mechanism. The rugged design features and highly
corrosion resistant materials make this connector series
ideal for marine applications where equipment is
continually exposed to rough treatment and salt laden
atmosphere.
Amphenol Limited
Connector Styles
Straight Plug
British Standard Part No C2560-xx-xx-xxxx
Amphenol Part No (Crimp) 608-36T-xx-xxxx
(Solder) 608-56T-xx-xxxx
A
MAX.
mm in.
A1
MAX.
mm in.
C D!A
MAX.
mm in.
E
MAX.
mm in.
F
H
MAX.
mm in.
SHELL
SIZE
THREAD
(CLASS 2A)
7
9
8
21.1 .83
23.8 .94
28.2 1.11
31.4 1.24
36.5 1.44
39.3 1.55
42.5 1.67
45.3 1.78
48.4 1.91
/
16 – 28 U.N.E.F.
10
12
14
16
18
20
22
24
/16 – 24 U.N.E.F.
11
13
15
14.8 .58
/
16 – 24 U.N.E.F.
16 – 20 U.N.E.F.
16 – 20 U.N.E.F.
/
/
22.98 .905
32.9 1.30
25.4 1.00
1 1
1 3
1 5
1 7
/
/
/
/
16 – 18 U.N.E.F.
16 – 18 U.N.E.F.
16 – 18 U.N.E.F.
16 – 18 U.N.E.F.
16.3 .64
24.89 .980
Wall Mount Receptacle
British Standard Part No C2561-xx-xx-xxxx
Amphenol Part No (Crimp) 608-30T-xx-xxxx
(Solder) 608-50T-xx-xxxx
Max Panel Thickness, Shell Size 8-18, 0.10in (2.6mm)
20-24, 0.24in (6.1 mm)
D DIA
± .13
.005
mm. in. mm in.
A
MAX.
A1
MAX.
B
MAX.
C
MAX
E
MAX.
F
MAX.
±
SHELL
SIZE
THREAD
mm. in. mm. in. mm. in. mm. in. mm. in.
(CLASS 2A)
7
9
8
21.1 .83
/
16 – 28 U.N.E.F.
16 – 24 U.N.E.F.
10
12
14
16
18
20
22
24
24.3 .96
/
11
13
15
26.6 1.05
/16 – 24 U.N.E.F.
32.9 1.30 25.6 1.01 11.7 46 29.0 1.15 1.8 .07
/
16 – 20 U.N.E.F. 22.98 .905 3.1 .12
16 – 20 U.N.E.F.
31.2 1.23
33.8 1.33
/
1 1
1 3
1 5
1 7
/
/
/
/
16 – 18 U.N.E.F.
37.0 1.46
16 – 18 U.N.E.F.
34.6 1.37 27.2 1.07 14.8 58 40.1 1.58 2.6 .10
15.5 61 43.3 1.71
16 – 18 U.N.E.F. 26.41 1.040
16 – 18 U.N.E.F.
3.9
.15
Jam Nut Receptacle
Single Hole Fixing (With Accessory Thread)
British Standard Part No C2562
Amphenol Part No (Crimp) 608-37T-xx-xxxx
(Solder) 608-57T-xx-xxxx
Max Panel Thickness, Shell Size 8-18, 0.10 in (2.6mm)
20-24, 0.24in (6.1 mm)
A
MAX.
A1
MAX.
B
MAX.
C
MAX.
D
MAX.
E
MAX.
K
MAX.
SHELL
SIZE
mm. in.
mm.
in.
mm.
in.
mm.
in. mm.
24.3
in. mm.
.96
in. mm.
in.
8
27.4 1.08
30.5 1.20
35.4 1.39
38.4 1.51
41.7 1.64
44.7 1.76
49.6 1.95
57.6 2.07
55.8 2.20
19.3
22.7
.76
.89
10
12
14
16
18
20
22
24
27.4 1.08
32.2 1.27
35.4 1.39
38.5 1.52
41.6 1.64
46.5 1.83
49.7 1.96
52.8 2.08
32.9 1.30 30.0 1.18 17.7
.70
27.2 1.07
30.5 1.20
33.6 1.32
36.9 1.45
39.9 1.57
43.2 1.70
46.3 1.82
3.3 .13
34.6 1.37 32.7 1.29 22.5
23.6
.89
.93
4.1 .16
Jam Nut Receptacle
Single Hole Fixing (No Accessory Thread, Solder
Contacts only)
British Standard Part No C2563-xx-xx-xxxx
Amphenol Part No (Solder) 608-57A-xx-xxxx
Max Panel Thickness, Shell Size 8-18, 0.10in (2.6mm)
20-24, 0.24in (6.1 mm)
A
MAX.
B
MAX.
C
MAX.
D
MAX.
E
MAX.
H
MAX.
K
MAX.
SHELL
SIZE
mm. in. mm. in. mm. in.
27.4 1.08
mm.
24.3
27.4
32.2
35.4
38.5
41.6
46.5
49.7
52.8
in.
mm. in. mm. in.
mm.
in.
.76
8
.96
19.3
22.7
27.2
30.5
33.6
36.9
39.9
43.2
46.3
10
12
14
16
18
20
22
24
30.5 1.2
1.08
1.27
1.4
.89
35.4 1.39
25.6 1.01 17.7 .70
38.4 1.51
1.07
1.2
3.3 .13 21.4 .84
41.7 1.64
44.7 1.76
1.52
1.64
1.83
1.96
2.08
1.32
1.45
1.57
1.7
49.6 1.95
22.5 .89
27.0 1.06
4.1 .16
27.2 1.07
52.6 2.07
23.6 .93 55.8 2.20
28.0 1.10
1.82
Insert Arrangements
Panel Mounting Details
Arrangement Crimp Solder No Contacts
Contact
Size Rating
08-33
10-02
10-06
12-03
12-10
14-05
14-15
14-19
16-08
16-26
18-11
18-32
20-16
20-41
22-21
22-55
24-61
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
3
20
1
2
16
2
1
2
1
2
1
1
2
1
2
1
2
1
2
1
1
6
20
16
20
16
20
20
16
20
16
20
16
20
16
20
20
3
10
5
15
19
8
16
26
11
32
16
41
21
55
61
a dia
W DIA
X
Y DIA
Z
Voltage
Rating
T CRS
MIN
V CRS
MIN
1
2
SHELL
SIZE
CRS (T.P.)
± .13
±.005
±.25 ±.010
±.13 ±.005 ±.13 ±.005
mm.
in.
mm. in. mm. in. mm. in. mm. in. mm. in. mm. in.
22.7 .89 14.3 .56 15.09 .954 27.4 1.08 15.90 .626 14.94 .588
25.4 1.00 17.3 .68 18.26 .719 30.5 1.2 18.92 .745 17.91 .705
29.8 1.18 21.4 .84 20.62 .812 35.4 1.39 23.70 .933 22.33 .879
33.0 1.30 24.4 .96 23.01 .906 38.4 1.51 26.77 1.054 25.45 1.002
38.1 1.50 27.7 1.09 24.61 .969 41.7 1.64 29.95 1.179 28.65 1.128
40.9 1.61 30.8 1.21 26.97 1.062 44.7 1.76 33.12 1.304 31.83 1.253
44.0 1.74 3.41 1.34 29.36 1.156 49.3 1.94 36.30 1.429 35.00 1.378
46.8 1.85 37.1 1.46 31.75 1.250 52.8 2.08 39.47 1.554 38.18 1.503
50.0 1.97 40.1 1.59 34.93 1.375 55.8 2.20 42.65 1.679 41.35 1.628
Sea Level
8
Working Voltage DC
Voltage Proof DC
700
1250
3000
10
12
14
16
18
20
22
24
2100
3.3
4.2
.13
.17
*Please note that the establishment of electrical safety factors is left entirely in the designer's hands,
since he is in the best position to know what peak voltages, switching surges, transients, etc . can be
expected in a particular circuit
Connector
Accessories
Ordering Codes
Amphenol Part No
British Standard Part No
Accessory and Tool Ordering Code
Keyway Orientation
ANGLE
SHELL SIZE
µ °
‘C’
‘N’
`B’
‘E’
‘F’
08
10
12
14
16
18
20
22
24
105
-
-
118
82
105
105
105
105
105
105
105
105
85
89
91
93
95
95
97
97
125
121
119
117
115
115
113
113
115
115
75
85
85
120
120
120
120
120
120
75
75
75
75
75
Connectors are supplied with a full
complement of contacts but can be
supplied separately.
Assembly Instructions
Contact
Size
Colour
Code
Contact Part Nos
Quantity
Per Pack
Suitable Wire Sizes
Permissible Insulation
O.D. range for Grommet
Stripping
Lengths
sealing
A W G
2012224
in
mm
in
mm
in
mm
20
16
RED
pin: 162GB-149-20,000-05-pk25
skt: 16268-101-20,000-05-pk25
pin: 162GB-149-16,000-05-pk25
skt: 16268-101-16.000-05-pk25
25
25
25
25
0.032 - 0.020
0.047 – 0.085
1.19 – 2.16
0.220 – 0.260
5.6 – 6.6
0.81 - 0.51
BLUE
0.051 - 0.032
0.066 – 0.109
1.675 - 2.77
0.220 – 0.260
5.6 – 6.6
16:18:20 1.295 - 0.81
Wire Stripping
Strip 5 6mm ( 220 in ) to 6 6mm (.260 in ) of insulation from end of wire for both
size 20 and 16 contacts taking care not to cut or nick strands. If ends fray twist
them back to their original lay
Crimp Wire to Contact
Use (M22520 1-01) with Turret Head (M22520/1-02). Release and rotate Turret
Knob to proper contact size (as per colour code) and lock adjust Selector Knob on
handle to correct wire size (see table) Insert stripped wire into Contact Pocket until
it is visible through inspection hole Fully seat Contact in Crimp Tool Positioner and
close handles in one full stroke (The Rachel will not release until tool has completed
full stroke) Inspect Crimp for wire visibility through Inspection Hole
Crimping Jaw Setting
Contact Size
Wire Size
24
Crimp Jaw Setting
Removal Tool
Part No
Contact Insertion Tool
Grommet
Sealing Plug
Size
Part No
No 2
No 3
No 4
No 4
No 5
No 6
20
MS 24256A-20
(T 2594-20)
MS 242568-20
(T 2018-20)
162GB-130-20000
20
22
20
16
MS 24256A-16
(T 2594-16)
MS24256R-16
(T 2018-16)
162GB-130-16000
20
16
18
16
Contact Insertion
Contact Removal
Select the proper insertion tool for the size of contact as per table The insertion tool
and procedure are the same for both pin and socket contacts Slide rear accessory
and sleeve over wire bundle Lay wire in groove of insertion tool and slide contact
into front of 1001 until it is properly located in tool probe Insert contact into the
correct hole in the rear face of the grommet Keeping contact in line with the axis of
the hole, apply a smooth even push on the tool until the contact is fully seated in
position Note it is essential that the contact and tool are correctly aligned with the
axis of hole during insertion to prevent damage to contacts Withdraw tool at right
angles to grommet surface until completely free of connector All contacts must be
inserted whether in circuit or not and the appropriate size sealing plug used behind
any contacts that are not wired. Push the sealing plug by hand until it is fully seated.
CAUTION extra care is required in this operation to prevent damage to the
connector Remove the rear accessory and sleeve and slide back on wire bundle
Select the proper removal tool for the size of contact from table The same tool is
used for both pin and socket contacts Position the removal tool over the contacts to
be removed and push until tool probe is fully bottomed, shown when indicator band
enters insert hole Tool is inserted to first band only when removing pin contacts and
to second band for socket contacts removal Slide the plunger knob forward to
remove contact N B removed tool is inserted into hole of connector.
AmphenolÒ 608 Specials
Hermetic Receptacles
Wall Mount, Jam Nut, Soldermount
Combat Serial Highway
100W Data Bus, DEF Stan 00-19
Amphenol 716 Series
Consult Factory for Availability.
Full Range Tooled - Consult Factory for Data.
Low Pass EMI Filter Receptacles
Through Bulkhead Receptacles
Consult Factory for Availability.
Consult Factory for Availability.
NOTICE
Products are sold subject to Amphenol's conditions of sale ("the standard conditions"). All specifications and statements contained herein are believed to be correct at the time of printing, but no
representation or warranty, express or implied, is given as to any specification or statement contained herein. Product specifications including performance characteristics are typical only and
subject to deviation. Specifications are also subject to change without notice. User should not assume that all safety measures are indicated or that other measures may not be required. No
representation or Warranty, express or implied, is given that any use of products (including any stated or suggested use) does not infringe any patent, registered design or other third party rights
and no stated or suggested use of products can be taken to recommend any such infringement.
Amphenol Limited
Thanet Way, Whitstable, Kent, CT5 3JF, England.
Telephone: (01227) 773200
Fax: (01227) 276571
Amphenol
608 Series
RFI sealed backshells for
608 crimp connectors
Shell size
Dia ‘A’ max
21.00
Length ‘B’ max
106.70
Dia ‘C’ max
21.03
8
10
12
14
16
18
20
22
24
23.8
28.15
31.30
36.45
39.25
42.40
45.34
48.00
106.70
106.70
106.70
111.70
111.70
113.40
113.40
113.40
23.80
28.27
31.34
36.50
39.27
42.42
45.21
48.39
Nato No 5935-99-654-
Shell size Thread ‘A’ Thread ‘B’
Part No
608-146-08
11
7
8
/
16 x 20
/
16 X 28
6250
UN-2A
UNEF-2B
13
9
10
12
14
16
18
20
22
24
/
16 X 20
/
16 X 24
608-146-10
608-146-12
608-146-14
608-146-16
608-146-18
608-146-20
608-146-22
608-146-24
6251
6252
6253
6254
6255
6256
6257
6258
UNEF-2A
UNEF-2B
11
11
/
16 X 20
/16 X 24
UNEF-2A
1 1/16 X 20
UN-2A
UNEF-2B
13
/
16 X 20
UNEF-2B
1 1/4 X 20
UN-2A
/16 X 20
15
UNEF-2B
1 1/16 X 18
UNEF-2B
1 3/8 X 20
UN-2A
1 1/2 X 20 1 3/16 X 18
UN-2A
1 9/16 X 20 1 5/16 X 18
UN-2A UNEF-2B
1 11 16 X 20 1 7/16 X 18
UN-2A UNEF-2B
UNEF-2B
/
Shell size
Thread 'A' Thread 'B'
Part No
Nato No.
5935-99-654
Connector
Outlet
11
9
10
12
14
16
18
20
22
24
8
/
16 x 20
/
18 x 24
608-147-10
608-147-12
608-147-14
608-147-16
6268
6269
6270
6271
6272
6273
6274
6275
UN-2A
UNEF-2B
13
11
10
10
12
14
16
16
18
/
16 x 20
/16 x 24
UNEF-2A
UNEF-2B
13
13
/
16 x 20
/16 x 20
UNEF-2A
UNEF-2B
15
15
/
16 X 20
/16 X 20
UNEF-2A
UNEF-2B
1 13 16 X 20 1 1/16 X 20 608-147-18
/
UN-2A
1 1/4 X 20
UN-2A
UNEF-2B
1 5/16 X 18 608-147-20
UNEF-2B
1 1/4 X 20
UN-2A
1 5/16 X 18 608-147-22
UNEF-2B
3/8 X 20
UN-2A
1 11
UNEF-2B
/16 X 18 608-147-24
Marine Products
608 Series RFI sealed backshells for 608 crimp connectors
Shell ‘A’ dia Length
Size max. ‘A’ max.
Thread
'C'
16 x 20 UN-2B
16 X 20 UNEF-2B
16 X 20 UNEF-2B
Part No
Nato No
5935-99-654-
6284
11
8
21.00
23.80
28.15
31.30
36.45
39.25
42.40
45.34
48.00
65.55
65.55
65.55
65.55
70.55
70.55
70.55
70.55
70.55
/
608-148-08
608-148-10
608-148-12
608-148-14
608-148-16
608-148-18
608-148-20
608-148-22
608-148-24
13
15
10
12
14
16
18
20
22
24
/
/
6285
6286
6287
6288
6289
6290
6291
6292
1 1/16 X 20 UN-2B
1 1/4 X 20 UN-2B
1 3/8 X 20 UN-2B
1 1/2 X 20 UN-2B
1 9/16 X 20 UN-2B
1 11
/
16 X 20 UN-2B
Rear section
Shell size
Cable diameter (mm)
Part Number
Nato number
5935-99-654
6302
6303
6305
6310
6311
6537
6314
6316
6320
6322
6325
6538
6360
6361
6539
6541
6542
6543
6335
6337
6544
6545
6343
6546
6344
6547
6548
6549
6550
6348
6349
6551
8
10
8mm to 4mm
11mm to 7mm
8mm to 4mm
608-149-6302
608-149-6303
608-149-6305
608-149-6310
608-149-6311
608-149-6537
608-149-6314
608-149-6316
608-149-6320
608-149-6322
608-149-6325
608-149-6538
608-149-6360
608-149-6361
608-149-6539
608-149-6541
608-149-6542
608-149-6543
608-149-6335
608-149-6337
608-149-6544
608-149-6545
608-149-6343
608-149-6546
608-149-6344
608-149-6547
608-149-6548
608-149-6549
608-149-6550
608-149-6348
608-149-6349
608-149-6551
12
14
14mm to 10mm
11 mm to 7mm
17mm to 13mm
14mm to 10mm
11mm to 7mm
20mm to 16mm
17mm to 13mm
14mm to 10mm
11 mm to 7mm
23mm to 19mm
20mm to 16mm
17mm to 13mm
14mm to 10mm
26mm to 22mm
23mm to 19mm
20mm to 16mm
17mm to 13mm
14mm to 10mm
29mm to 25mm
26mm to 22mm
23mm to 19mm
20mm to 16mm
17mm to 13mm
32mm to 28mm
29mm to 25mm
26mm to 22mm
23mm to 19mm
20mm to 16mm
17mm to 13mm
16
18
20
22
24
Note: Size 20 seal plugs are supplied with each seal kit
Notice: Products are sold subject to AMPHENOL’s condition of sale ("the standard conditions'). All specifications and statements are
believed to be correct at the lime of printing, but no representation of warranty, express or Implied Is given as to any specification or
statement contained herein. Product specifications including performance characteristics are typical only, and subject to deviation.
Specifications are also subject to change without notice. User should not assume that all safety measures are indicated or that any other
measures may not be required. No representation or warranty, express or Implied, Is given that any use of products (Including any stated
or suggested use) does not Infringe any patent, registered design or other third party rights and no suggested use of products can be
taken to recommend such infringement.
AMPHENOL LIMITED
Thanet Way, Whitstable, Kent CT5 3JF
Amphenol
Tel. 0227 773200
Fax 0227 276571
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明