ELVR-L01G-FNRJ-I-NS5H [AMPHENOL]
Peizoresistive Sensor, 0Psi Min, 0.036Psi Max, Rectangular, Surface Mount, SMT-8;型号: | ELVR-L01G-FNRJ-I-NS5H |
厂家: | Amphenol |
描述: | Peizoresistive Sensor, 0Psi Min, 0.036Psi Max, Rectangular, Surface Mount, SMT-8 |
文件: | 总21页 (文件大小:4912K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ELVR - Analog and Digital Low Pressure Sensors Series
Introduction
Table of Contents
The ELVR Series Mini Analog and Digital Output Sensor is
based on All Sensors’ CoBeam2 TM Technology. This reduces
Features & Applications ..........................2
Standard Pressure Ranges ................. . ......2
Pressure Sensor Maximum Ratings ........ . . .....2
Environmental Specifications ......................2
Analog Output (5V) Specifications............... 3
Analog Output (3V) Specifications................4
Digital Output (5V) Specifications ...... . . . ......5
Digital Output (3V) Specifications................6
Device Option Descriptions .........................7
I2C Interface .........................................8-9
SPI Interface ......................................10-11
How to Order Guide................................12
Dimensional Package Drawings
package stress susceptibility, resulting in improved overall
long term stability. The superior dual-die technology also
vastly improves position sensitivity compared to single die
devices. This technology breakthrough advances the state of
the art for piezoresistive pressure sensors beyond what has
been achieved for low pressure sensing using silicon based
strain technology.
The ELVR sensors can communicate directly with microcon-
trollers, eliminating the need for additional A/D converters.
ELVR series pressure sensors are available at 3V and 5V
supply voltage. The ELVR series provides a rapid update rate
at multiple resolutions. A wide range of miniature SIP and
DIP package options allows for flexible and space-saving
PCB-mounting. These calibrated and compensated sensors
provide accurate, stable output over a wide temperature
range. This series is intended for use with non-corrosive,
non-ionic working fluids such as air and dry gases. A pro-
tective parylene coating is optionally available for moisture/
harsh media protection for pressure ranges 10 inH2O and
above.
Non-Barbed SIL, DIP and SMT ....13-16
Barbed SIL, DIP and SMT ...........17-20
Product Labeling................................21
Suggested Pad Layouts .......................21
The ELVR Series is a direct replacement to First Sensors’
HCLA product line. Refer to the product web page for a
cross reference table:
https://www.allsensors.com/products/elvr-series
All Sensors
DS-0375 Rev A
Page 1
ELVR Series Analog & Digital Pressure Sensors
Features
Applications
• Pressure Ranges from 2.5 mbar to 75 mbar
(1 to 30 inH2O)
• Precision ASIC Conditioning
• Analog Output with Digital I2C and SPI
Interface
• Medical
• Industrial
• 3V and 5V Supply Voltage
Standard Pressure Ranges
Differential
Proof Pressure
Differential
Burst Pressure
Operating Range A
Device
mbar
inH2O
mbar
inH2O
mbar
inH2O
± 2.5
± 12.5
± 25
± 50
± 75
2.5
ELVR-L01D
ELVR-L05D
ELVR-L10D
ELVR-L20D
ELVR-L30D
ELVR-L01G
ELVR-L05G
ELVR-L10G
ELVR-L20G
ELVR-L30G
± 1
± 5
± 10
± 20
± 30
1
250
500
500
500
500
250
500
500
500
500
100
201
201
201
201
100
201
201
201
201
750
750
301
301
301
502
803
301
301
301
502
803
750
1250
2000
750
12.5
25
5
750
10
750
50
20
1250
75
30
2000
Note A: Operating range in inH2O is expressed as an approximate value. ELVR series is calibrated to mbar pressure units.
Pressure Sensor Maximum Ratings
Environmental Specifications
Supply Voltage (Vs)
2.7 to 5.5 Vdc
Temperature Ranges
Compensated:
Commercial
Industrial
0°C to 70°C
-20°C to 85°C
Analog-Output Current
Sink
1 mA
1 mA
Source
Operating
Storage
-25°C to 85°C
-40°C to 125°C
Common Mode Pressure
2000 mbar / 803 inH2O
Humidity Limits (non condensing)
0 to 95% RH
Equivalent Circuit
SMT Assembly Specifications
I2C
SPI
Average preheating temperature gradient
Soak Time
2.5 K/s
ca. 3 min
50 s
+Vs
+Vs
Time above 217°C
MISO
CLK
SS
Time above 230°C
40 s
Vout
SCL
Time above 250°C
15 s
Vout
SDA
MOSI
Peak Temperature
260°C
-3.5 K/s
Cooling Temperature Gradient
GND
GND
See package drawings for pinouts.
All Sensors
DS-0375 Rev A
Page 2
Table of Contents
Performance Characteristics for ELVR Series Amplified Low Pressure Sensors
All parameters are measured at 5.0 volt excitation and 25°C unless otherwise specified. Pressure measurements
are with positive pressure applied to PORT B
Analog Performance Characteristics
Specification
Parameter
Minimum
Nominal
Maximum
Units
Notes
Full Scale Span (FSS)
Full Scale Output (FSO)
3.9
4.0
4.1
V
5
-
Min Pressure
Max Pressure
0.25
4.25
V
V
Span Temperature Shift
L01x
-
-
-
-
±2
±1
%FSS
%FSS
2
2
L05x though L30x
Offset Voltage @ zero differential pressure
LxxD
LxxG
2.15
0.15
2.25
0.25
2.35
0.35
V
V
-
-
Offset Temperature Shift
L01x
L05x
-
-
-
-
±1.5
±1
%FSS
%FSS
%FSS
2
2
2
L10x through L30x
-
-
±0.5
Offset Warm-up Shift
L01x
-
-
±10
±5
-
-
mV
mV
3
3
L05x thorugh L30x
Offset Long Term Drift (one year)
L01x
-
-
-
±15
±5
-
-
mV
mV
-
-
L05x thorugh L30x
Linearity, Hysteresis error (all products)
±0.05
±0.25
%FSS
4
Response Delay
-
-
-
0.5
-
-
11
-
ms
bit
1
-
D/A Resolution
Current Consumption (no load)
5.0
mA
6
Specification Notes
Note 1: For any pressure applied the output response time to reach 90% of pressure applied.
Note 2: Shift is relative to 25°C between standard or industrial compensated temperature
range endpoints.
Note 3: Shift is within the first hour of excitation applied to the device.
Note 4: Measured at one-half full scale rated pressure using best straight line curve fit.
Note 5: The span is the algebraic difference between full scale output voltage and the offset voltage.
Note 6: Parameter is characterized and not 100% tested.
ELVR Series Analog & Digital Pressure Sensors
Page 3
Table of Contents
Performance Characteristics for ELVR Series Amplified Low Pressure Sensors
All parameters are measured at 3.0 volt excitation and 25°C unless otherwise specified. Pressure measurements
are with positive pressure applied to PORT B
Analog Performance Characteristics
Specification
Parameter
Minimum
Nominal
Maximum
Units
Notes
Full Scale Span (FSS)
Full Scale Output (FSO)
1.9
2.0
2.10
V
5
-
Min Pressure
Max Pressure
0.25
2.25
V
V
Span Temperature Shift
L01x
-
-
-
-
±2
±1
%FSS
%FSS
2
2
L05x though L30x
Offset Voltage @ zero differential pressure
Offset Temperature Shift
LxxD
LxxG
1.15
0.15
1.25
0.25
1.35
0.35
V
V
-
-
L01x
L05x
-
-
-
-
±1.5
±1
%FSS
%FSS
%FSS
2
2
2
L10x through L30x
-
-
±0.5
Offset Warm-up Shift
L01x
-
-
±10
±5
-
-
mV
mV
3
3
L05x thorugh L30x
Offset Long Term Drift (one year)
L01x
-
-
-
±5
±5
-
-
mV
mV
-
-
L05x thorugh L30x
Linearity, Hysteresis error (all products)
±0.05
±0.25
%FSS
4
Response Delay
-
-
-
0.5
-
-
11
-
ms
bit
1
-
D/A Resolution
Current Consumption
5
mA
6
All Sensors
DS-0375 Rev A
Page 4
Table of Contents
Performance Characteristics for ELVR Series Amplified Low Pressure Sensors
All parameters are measured at 5.0 volt excitation and 25°C unless otherwise specified. Pressure measurements
are with positive pressure applied to PORT B
Digital Performance Characteristics in Decimal
Specification
Parameter
Minimum
Nominal
Maximum
Units
Notes
Full Scale Span (FSS)
Full Scale Output (FSO)
-
26214
-
Decimal
2
Min Pressure
Max Pressure
1638
Decimal
Decimal
5
5
27852
Span Temperature Shift
L01x
-
-
-
-
±2
±1
%FSS
%FSS
2
2
L05x though L30x
Offset Voltage @ zero differential pressure
Offset Temperature Shift
LxxD
LxxG
14090
983
14745
1638
15400
2294
Decimal
Decimal
-
-
L01x
L05x
-
-
-
-
±1.5
±1
%FSS
%FSS
%FSS
2
2
2
L10x through L30x
-
-
±0.5
Offset Warm-up Shift
L01x
-
-
66
33
-
-
Decimal
Decimal
3
3
L05x thorugh L30x
Offset Position Sensitivity (±1 g)
Offset Long Term Drift (one year)
L01x
-
-
99
33
-
-
Decimal
Decimal
-
-
L05x thorugh L30x
L01x
-
-
-
66
33
-
-
Decimal
Decimal
%FSS
-
-
L05x thorugh L30x
Linearity, Hysteresis error (all products)
±0.05
±0.25
4
Response Delay
0.5
12
5
ms
bit
1
-
A/D Resolution
-
-
-
-
Current Consumption
mA
6
ELVR Series Analog & Digital Pressure Sensors
Page 5
Table of Contents
Performance Characteristics for ELVR Series Amplified Low Pressure Sensors
All parameters are measured at 3.0 volt excitation and 25°C unless otherwise specified. Pressure measurements
are with positive pressure applied to PORT B
Digital Performance Characteristics in Decimal
Specification
Parameter
Minimum
Nominal
Maximum
Units
Notes
Full Scale Span (FSS)
Full Scale Output (FSO)
21299
21845
22391
Decimal
2
Min Pressure
Max Pressure
-
-
2731
-
-
Decimal
Decimal
5
5
24576
Span Temperature Shift
L01x
-
-
-
-
±2
±1
%FSS
%FSS
2
2
L05x though L30x
Offset Voltage @ zero differential pressure
Offset Temperature Shift
LxxD
LxxG
12561
1638
13653
2731
14745
3823
Decimal
Decimal
-
-
L01x
L05x
-
-
-
-
±1.5
±1
%FSS
%FSS
%FSS
2
2
2
L10x through L30x
-
-
±0.5
Offset Warm-up Shift
L01x
-
-
66
33
-
-
Decimal
Decimal
3
3
L05x thorugh L30x
Offset Position Sensitivity (±1 g)
Offset Long Term Drift (one year)
L01x
-
-
99
33
-
-
Decimal
Decimal
-
-
L05x thorugh L30x
L01x
-
-
-
66
33
-
-
Decimal
Decimal
%FSS
-
-
L05x thorugh L30x
Linearity, Hysteresis error (all products)
±0.05
±0.25
4
Response Delay
-
-
-
0.5
12 or 14
5
-
-
-
ms
bit
1
-
A/D Resolution
Current Consumption
mA
6
All Sensors
DS-0375 Rev A
Page 6
Table of Contents
Device Options
The following is a list of factory programmable options. Consult the factory to learn more about the options.
Interface
I2C and SPI interfaces are available with eight (8) lead packages only.
Supply Voltage
Devices are characterized at either 3.0V or 5.0V depending on the options selected. It is suggested to select
the option that most closely matches the application supply voltage for best possible performance.
Speed/Power
There are two options of Speed/Power. These are Fast(F) and High Resolution(H).
Fast Mode(F) Is the fastest operating mode where the device operates with continuous sampling at the
fastest internal speed 12 bit resolution, 0.5ms update rate.
High Resolution(H): Also operates with continuous samples however the ADC is set for longer dura-
tion for higher resolution. The conversion times are resultantly longer than the Fast(F) mode with 1 ms
update rate.
Coating
Parylene Coating: Parylene coating provides a moisture barrier and protection form some harsh media. Con-
sult factory for applicability of Parylene for the target application and sensor type. This option is not available
for pressure ranges below 10 inH2O.
ELVR Series Analog & Digital Pressure Sensors
Page 7
Table of Contents
I2C Interface
Introduction
DATAvalid (D): State of data line represents valid data when,
after START condition, data line is stable for duration of
HIGH period of clock signal. Data on line must be
changed during LOW period of clock signal. There is
one clock pulse per bit of data.
The ELVR is capable of producing a digital output signal.
The device runs a cyclic program, which will store a corrected
pressure value with 12 or 13 bit resolution about every
250µs within the output registers of the internal ASIC. In order
to use the sensor for digital signal readout, it should be
connected to a bidirectional I2C-bus.
Acknowledge (A): Data is transferred in pieces of 8 bits
(1 byte) on serial bus, MSB first. After each byte the receiving
device – whether master or slave – is obliged to pull
data line LOW as acknowledge for reception of data.
Master must generate an extra clock pulse for this pur-
pose. When acknowledge is missed, slave transmitter
becomes inactive.Master must then either send last com-
mand again or generate STOP condition in that case.
According to the I2C-bus specification, the bus is controlled
by a master device, which generates the clock signal,
controls the bus access and generates START and STOP
conditions. The ELVR is designed to work as a slave, hence
it will only respond to requests from a master device.
Digital I2C interface
Slave address: The I2C-bus master-slave concept
requires a unique address for each device. The ELVR has
a preconfigured slave address, see table 2. The sensor
will then listen to both slave addresses. After generating a
START condition the master sends the address byte
containing a 7 bit address followed by a data direction
bit (R/W). A "0" indicates a transmission from master to
slave (WRITE), a "1" indicates a data request (READ).
The ELVR complies with the following protocol in Figure 1.
Bus not busy : During idle periods both data line (SDA) and
clock line (SCL) remain HIGH.
START condition (S) : HIGH to LOW transition of SDA line
while clock (SCL) is HIGH is interpreted as START con-
dition. START conditions are always generated by the
master. Each initial request for a pressure value has to
begin with a START condition.
DATA operation : The sensor starts to send 2 data bytes
containing the current pressure value as a 15 bit
value placed in the output registers.
STOP condition (P) :LOW to HIGH transition of SDA line while
clock (SCL) is HIGH determines STOP condition. STOP
conditions are always generated by the master. More than
one request for the current pressure value can be trans-
mitted without generation of intermediate STOP condition.
SCL
SDA
START
condition
Data
valid
Data allowed
to change
STOP
condition
1
S
SlaveAddress R/W A Data Byte 1
Data Byte 2
A
Data Byte 1
P
A
Read out of ꢀrst pressure value
Read out of n pressure values (optional)
S = STARTcondition
A=Acknowledge
P= STOPcondition
Data Byte 1 = High Byte (MSB ꢀrst)
Data Byte 2 = Low Byte (LSB last)
generated by master
generated by slave
Figure1: I²C bus protocol
All Sensors
DS-0375 Rev A
Page 8
Table of Contents
I2C BUS INTERFACE (Cont'd)
I2C Interface Parameters
Parameter
Symbol
Minimum
Nominal
Maximum
Unit
Input High Level
-
90
-
100
% of Vs
Input Low Level
-
0
-
-
-
-
-
-
10
10
-
% of Vs
% of Vs
Ω
Output Low Level
-
-
-
500
-
Pull-Up Resistor
CSDA
Load Capacitance @ SDA
Input Capacitance @ SDA/SCL
Signal Clock Frequency
400
10
400
pF
CI2C_IN
FSCL
-
pF
100*
kHZ
tBUF
Bus Free Time Between STOP and START Condition
Hold Time (Repeated) START Condition, to First Clock Pulse
Low Period of SCL
1.3
0.8
1.3
0.6
1
-
-
-
-
-
-
-
-
-
-
µs
µs
µs
µs
µs
tHD.STA
tLow
tHigh
High Period of SCL
tSU.STA
Setup Time Repeated START Condition
Note: All Sensors recommends communication speeds of at least 100 kHz (max. 640 kHz).
Please contact your nearest All Sensors sales office for further information.
tSU;DAT
tHD;DAT
tSU;STA
tHD;STA
tR
tF
SCL
SDA
tHIGH
tLOW
tSU;STO
tBUF
tHD;STA
SCL
SDA
Figure 2. Timing Characteristics
ELVR Series Analog & Digital Pressure Sensors
Page 9
Table of Contents
SPI - SERIAL PERIPHERAL INTERFACE
Introduction
The ELVR series supports all clock phase (CPHA)=0
and polarity (CPOL)=0. CPOL which means that data transm-
ission starts with the rising first clock edge (see Figure 3).
The ELVR series is capable of producing a digital output
signal. The device runs a cyclic program, which will store a
corrected sensor value with 12 or 13 bit resolution about
every 9 ms within the output registers of the internal ASIC.
This cyclic program runs independent from the bus com-
munication. In order to use the pressure sensor for digital
Slave select
signal readout, it should be connected to a SPI Master device. The falling edge of the SS line indicates the beginning of
the transfer. Additionally the SS line must not be negated
SPI specifies four signals: The clock (CLK) is generated by
the master and input to all slaves. MOSI carries data from
master to slave. MISO carries data from slave back to mas-
ter. A slave select line (SS) allows individual selection of a
slave device.
and reasserted between the three bytes to be transmitted.
Data operation
The MOSI line should always be set to high level. So there
is no data transmission from master to slave. Because of
internal configuration the slave will answer the first byte
with an FFxh. The second and third byte contain the 15 bit
pressure information (see Figure 4).
SPI Modes
A pair of parameters called clock polarity (CPOL) and clock
phase (CPHA) determine the edges of the clock signal on
which the data are driven and sampled. Each of the two
parameters has two possible states, which allows for four
possible combinations, all of which are incompatible with
one another.
1
2
3
4
5
6
7
8
SCK Cycle
SCK
(CPOL=0)
MOSI
MISO
MSB
LSB
LSB
MSB
SS
Sampling
Figure 3: Example of a standard 1 byte SPI data transfer for CPHA=0 and CPOL=0
Data Byte 1
Data Byte 2
Data Byte 3
MOSI
MISO
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
P15P14P12 P11 P10 P9 P8 P7 P6 P5 P4 P3 P2 P1 P0
Relevant data
Figure 4: 3 byte data stream between ELVR sensor and master containing the pressure value as a 15 bit value.
All Sensors
DS-0375 Rev A
Page 10
Table of Contents
SPI - SERIAL PERIPHERAL INTERFACE (Cont'd)
Interface Parameters
Parameter
Symbol
Minimum
Nominal
Maximum
Unit
-
90
-
100
% of Vs
Input High Level
-
0
-
-
-
-
-
-
10
10
-
% of Vs
% of Vs
Ω
Input Low Level
-
-
-
500
-
Output Low Level
Pull-Up Resistor
CMISO
400
10
640
pF
Load Capacitance @ MISO
Input Capacitance @ Each Pin
Signal Clock Frequency
CSPI_IN
fSCK
-
pF
100*
kHZ
tSPI_HD_MISO
tSPI_SU_MOSI
tSPI_SU_SS
tSPI_HD_SS
MISO Hold Time after SCK Sample Slope
MOSI Setup Time Before SCK Sample Slope
/SS Setup Time Before SCK Sample Slope
/SS Hold Time After SCK Sample Slope
200
2/fCLK
10
-
-
-
-
-
-
-
-
ns
-
ns
-
1/fCLK
Note: All Sensors recommends communication speeds of at least 100 kHz (max. 640 kHz).
Please contact your nearest All Sensors sales office for further information.
tSPI
tSPI
_HD
_SU_SS
_SS
tSPI
_SU_MOSI
tSPI
_HD_MISO
SCK
(CPOL=0)
MOSI
MISO
SS
Figure 5: Timing characteristics
ELVR Series Analog & Digital Pressure Sensors
Page 11
Table of Contents
How to Order
Refer to Table 1 for configuring a standard base part number which includes the pressure range, package and tempera-
ture range. Table 2 shows the available configuring options. The option identifier is required to complete the device part
number. Refer to Table 3 for the available device package options.
Example P/N with options: ELVR-L01D-F1RS-C-NI3F
Table 1 - How to configure a base part number
SERIES
PRESSURE RANGE
ID Description
PACKAGE
Lid Style
ID Description
TEMPERATURE RANGE
Base
ID
Port Orientation
ID Description
Lead Type
ID
ID Description
ID Description
SIL(see note 7)
ELVR
L01D ±1 inH2O
L05D ±5 inH2O
F
1
Dual Port Same Side
Single Port
R
S
Long Non-Barbed
Long Barbed
T
D
J
C
I
Commercial
Industrial
N
DIP
J-Lead SMT
L-Lead SMT
L10D ±10 inH2O
L20D ±20 inH2O
L30D ±30 inH2O
L01G 0 to 1 inH2O
L05G 0 to 5 inH2O
L10G 0 to 10 inH2O
L20G 0 to 20 inH2O
L30G 0 to 30 inH2O
L
ELVR - L01D
-
F
1
R
S
-
C
Example
Table 2 - How to configure an option identifier
DIGITAL RESOLUTION,
UPDATE RATE
ID Description
COATING
ID Description
INTERFACE
SUPPLY VOLTAGE
Address ID Description
ID Description
A
Analog Only (see note 7)
N
P
No Coating
Parylene Coating(see note 8)
N/A
3
5
3.0V
5.0V
F
Fast Mode
I
I2C & Analog
0x78
(12bit, 0.5ms)
S
2
3
4
5
6
Option- SPI & Analog
Option- I2C & Analog
Option- I2C & Analog
Option- I2C & Analog
Option- I2C & Analog
Option- I2C & Analog
N/A
0x28
0x38
0x48
0x58
0x68
H
High Resolution
(14bit, 1ms)
Example
N
I
3
F
TABLE 3: Available F-Series Package Configurations
Non-Barbed Lid
Lead Style
Barbed Lid
Lead Style
Port
Orientation
SIL
DIP
SMT-J
SMT-L
SIL
DIP
SMT-J
SMT-L
Dual Port
Same Side
F1RT
F1RD
F1RJ
F1RL
F1ST
F1SD
NOT OFFERED
F1SL
Single Port
FNRT
Specification Notes (Cont.)
FNRD
FNRJ
FNRL
FNST
FNSD
FNSJ
FNSL
note 7: LEADFRAME “T” HAS ONLY ANALOG OUTPUT CAPABILITY. ALL LEAD TYPES EXCEPT FOR “T” HAVE SIMULTANEOUS DIGITAL AND
ANALOG OUTPUT CAPABILITY.
note 8: PARYLene CoAtInG not oFFeReD In J-LeAD SMt ConFIGURAtIon. PARYLene CoAtInG IS not oFFeReD FoR PReSSURe
RAnGeS BeLoW 10 InH2o.
All Sensors
DS-0375 Rev A
Page 12
Table of Contents
Package Drawings
Pin
1
Definition
Vs
B Port
High Pressure
A Port
Low Pressure
2
Gnd
3
Vout
4
Do not connect
6.95
.274
12.7
.500
4.57
.180
1
.039
6.5
.256
2.65
.104
10.7
.421
3
.118
16
.630
1
2
3
4
1.93
.076
26.3
1.036
2.54
.100
3.13
.123
2.54
.100
1.57
.062
7.62
.300
0.25
.010
15.9
.626
3
.118
11.84
.466
0.7
.028
All Sensors
2
.079
TITLE:
F-Series Package
NOTES
SIZE FILE NAME
1) Dimensions are in inches [mm].
F1RT Package
2) For suggested pad layout, see drawing: PAD-01.
A
Pin
1
Definition
B Port
High Pressure
Vs
Gnd
2
3
Vout
4
Do not connect
12.7
.500
1
.039
2.68
.106
6.5
.256
2.65
.104
10.7
.421
16
.630
1
2
3
4
1.93
.076
26.3
1.036
2.54
.100
3.13
.123
2.54
.100
1.57
.062
7.62
.300
0.25
.010
15.9
.626
3
.118
11.84
.466
0.7
.028
All Sensors
2
.079
TITLE:
F-Series Package
NOTES
1) Dimensions are in inches [mm].
2) For suggested pad layout, see drawing: PAD-01.
SIZE FILE NAME
FNRT Package
A
ELVR Series Analog & Digital Pressure Sensors
Page 13
Table of Contents
Package Drawings (Cont’d)
I2C
Definition
Vs
SPI
Definition
Vs
Pin
1
B Port
High Pressure
2
Gnd
Gnd
A Port
Low Pressure
3
Vout
Vout
MISO
CLK
6.95
.274
12.7
.500
4.57
.180
1
.039
Do not Connect
SCL
4
8
7
6
5
5
6.5
2.65
.104
.256
Do not Connect
6
SS
10.7
.421
16.5
.650
7
Do not Connect Do not Connect
SDA MOSI
3
.118
16
.630
8
1
2
3
4
1.93
.076
2.54
.100
0.25
.010
2.54
.100
3.13
.123
7.62
.300
15.9
.626
3
.118
11.84
.466
0.7
.028
2
.079
6.29
.248
9.98
.393
All Sensors
0.46
.018
1.27
.050
TITLE:
F-Series Package
NOTES
1) Dimensions are in inches [mm].
2) For suggested pad layout, see drawing: PAD-27.
SIZE FILE NAME
F1RD Package
A
I2C
Definition
Vs
SPI
Definition
Vs
B Port
High Pressure
Pin
1
2
3
4
5
6
7
8
Gnd
Gnd
Vout
Vout
MISO
CLK
12.7
.500
Do not Connect
SCL
1
.039
2.68
.106
8
7
6
5
6.5
.256
Do not Connect
SS
2.65
.104
10.7
.421
16.5
.650
Do not Connect Do not Connect
SDA MOSI
16
.630
1
2
3
4
1.93
.076
2.54
.100
0.25
.010
2.54
.100
3.13
.123
7.62
.300
15.9
.626
3
.118
11.84
.466
0.7
.028
2
.079
6.29
.248
9.98
.393
All Sensors
0.46
.018
1.27
.050
TITLE:
F-Series Package
NOTES
1) Dimensions are in inches [mm].
2) For suggested pad layout, see drawing: PAD-27.
SIZE FILE NAME
FNRD Package
A
All Sensors
DS-0375 Rev A
Page 14
Table of Contents
Package Drawings (Cont’d)
I2C
Definition
Vs
SPI
Definition
Vs
B Port
High Pressure
Pin
1
A Port
Low Pressure
2
Gnd
Gnd
3
Vout
Vout
MISO
CLK
6.95
.274
12.7
.500
Do not Connect
SCL
4
4.57
.180
1
.039
8
7
6
5
5
6.5
.256
Do not Connect
6
SS
2.65
.104
15.12
.595
10.7
.421
7
Do not Connect Do not Connect
SDA MOSI
16.5
.650
3
.118
16
.630
8
1
2
3
4
1.93
.076
2.54
.100
2.54
.100
0.25
.010
3.13
.123
7.62
.300
15.9
.626
3
.118
11.84
.466
0.7
.028
2
.079
4.76
.188
0.46
.018
All Sensors
1.27
.050
TITLE:
F-Series Package
NOTES
1) Dimensions are in inches [mm].
2) For suggested pad layout, see drawing: PAD-28.
SIZE FILE NAME
F1RJ Package
A
B Port
I2C
Definition
Vs
SPI
Definition
Vs
High Pressure
Pin
1
2
3
4
5
6
7
8
Gnd
Gnd
Vout
Vout
MISO
CLK
12.7
.500
1
.039
2.68
.106
Do not Connect
SCL
8
7
6
5
6.5
.256
Do not Connect
SS
2.65
.104
15.12
.595
10.7
.421
Do not Connect Do not Connect
SDA MOSI
16.5
.650
16
.630
1
2
3
4
1.93
.076
2.54
.100
2.54
.100
0.25
.010
3.13
.123
7.62
.300
15.9
.626
3
.118
11.84
.466
0.7
.028
2
.079
4.76
.188
All Sensors
0.46
.018
TITLE:
1.27
.050
F-Series Package
NOTES
1) Dimensions are in inches [mm].
2) For suggested pad layout, see drawing: PAD-28.
SIZE FILE NAME
FNRJ Package
A
ELVR Series Analog & Digital Pressure Sensors
Page 15
Table of Contents
Package Drawings (Cont’d)
I2C
Definition
Vs
SPI
Definition
Vs
B Port
Pin
1
High Pressure
A Port
Low Pressure
2
Gnd
Gnd
3
Vout
Vout
MISO
CLK
6.95
.274
12.7
.500
Do not Connect
SCL
4
4.57
.180
1
.039
5
8
7
6
5
Do not Connect
6
SS
6.5
.256
2.65
.104
12.52
.493
7
Do not Connect Do not Connect
SDA MOSI
10.7
.421
3
.118
16.5
.650
16
.630
8
1
2
3
4
1.93
.076
2.54
.100
0.25
.010
2.54
.100
3.13
.123
7.62
.300
15.9
.626
3
.118
11.84
.466
0.7
.028
2
.079
6.29
.248
7.99
.315
All Sensors
0.46
.018
1.27
.050
TITLE:
F-Series Package
NOTES
1) Dimensions are in inches [mm].
2) For suggested pad layout, see drawing: PAD-29.
SIZE FILE NAME
F1RL Package
A
B Port
I2C
Definition
Vs
SPI
Definition
Vs
High Pressure
Pin
1
2
3
4
5
6
7
8
Gnd
Gnd
12.7
.500
Vout
Vout
MISO
CLK
1
.039
2.68
.106
8
7
6
5
Do not Connect
SCL
6.5
.256
2.65
.104
12.52
.493
10.7
.421
Do not Connect
SS
16.5
.650
16
.630
Do not Connect Do not Connect
SDA MOSI
1
2
3
4
1.93
.076
2.54
.100
0.25
.010
2.54
.100
3.13
.123
7.62
.300
15.9
.626
3
.118
11.84
.466
0.7
.028
2
.079
6.29
.248
7.99
.315
0.46
.018
All Sensors
1.27
.050
TITLE:
F-Series Package
NOTES
1) Dimensions are in inches [mm].
2) For suggested pad layout, see drawing: PAD-29.
SIZE FILE NAME
FNRL Package
A
All Sensors
DS-0375 Rev A
Page 16
Table of Contents
Package Drawings (Cont’d)
Pin
1
Definition
Vs
B Port
High Pressure
A Port
Low Pressure
2
Gnd
3
Vout
4
Do not connect
6.95
.274
12.7
.500
5.05
.199
1
.039
8
7
6
5
5.5
.217
2.65
.104
10.7
.421
5
.197
16
.630
1
2
3
4
2.17
.086
2.54
.100
3.12
.123
2.54
.100
0.25
.010
7.62
.300
1.57
.062
17.7
.697
3
.118
14.2
.559
0.7
.028
All Sensors
2.1
.083
TITLE:
F-Series Package
NOTES
SIZE FILE NAME
1) Dimensions are in inches [mm].
2) For suggested pad layout, see drawing: PAD-01.
F1ST Package
A
Pin
1
Definition
B Port
High Pressure
Vs
Gnd
2
3
Vout
4
Do not connect
12.7
.500
2.68
.106
1
.039
8
7
6
5
5.5
.217
2.65
.104
10.7
.421
16
.630
1
2
3
4
2.17
.086
2.54
.100
3.12
.123
2.54
.100
0.25
.010
7.62
.300
1.57
.062
17.7
.697
3
.118
14.2
.559
0.7
.028
All Sensors
TITLE:
2.1
.083
F-Series Package
NOTES
1) Dimensions are in inches [mm].
2) For suggested pad layout, see drawing: PAD-01.
SIZE FILE NAME
FNST Package
A
ELVR Series Analog & Digital Pressure Sensors
Page 17
Table of Contents
Package Drawings (Cont’d)
I2C
Definition
Vs
SPI
Definition
Vs
B Port
High Pressure
Pin
1
A Port
Low Pressure
2
Gnd
Gnd
3
Vout
Vout
MISO
CLK
6.95
.274
12.7
.500
5.05
.199
Do not Connect
SCL
4
1
.039
8
7
6
5
5
5.5
.217
2.65
.104
Do not Connect
6
SS
10.7
.421
5
.197
16.5
.650
Do not Connect Do not Connect
SDA MOSI
7
16
.630
8
1
2
3
4
2.17
.086
2.54
.100
0.25
.010
2.54
.100
3.12
.123
7.62
.300
17.7
.697
3
.118
14.2
.559
0.7
.028
2.1
.083
6.29
.248
9.98
.393
All Sensors
0.46
.018
1.27
.050
TITLE:
F-Series Package
NOTES
1) Dimensions are in inches [mm].
2) For suggested pad layout, see drawing: PAD-27.
SIZE FILE NAME
F1SD Package
A
I2C
Definition
Vs
SPI
Definition
Vs
B Port
High Pressure
Pin
1
2
3
4
5
6
7
8
Gnd
Gnd
Vout
Vout
MISO
CLK
12.7
.500
Do not Connect
SCL
2.68
.106
1
.039
8
7
6
5
5.5
.217
Do not Connect
SS
2.65
.104
10.7
.421
16.5
.650
Do not Connect Do not Connect
SDA MOSI
16
.630
1
2
3
4
2.17
.086
2.54
.100
0.25
.010
2.54
.100
3.12
.123
7.62
.300
17.7
.697
3
.118
14.2
.559
0.7
.028
2.1
.083
6.29
.248
9.98
.393
All Sensors
0.46
.018
1.27
.050
TITLE:
F-Series Package
NOTES
1) Dimensions are in inches [mm].
2) For suggested pad layout, see drawing: PAD-27.
SIZE FILE NAME
FNSD Package
A
All Sensors
DS-0375 Rev A
Page 18
Table of Contents
Package Drawings (Cont’d)
I2C
Definition
Vs
SPI
Definition
Vs
B Port
High Pressure
Pin
1
A Port
Low Pressure
2
Gnd
Gnd
3
Vout
Vout
MISO
CLK
6.95
.274
12.7
.500
5.05
.199
4
Do not Connect
SCL
1
.039
8
7
6
5
5
5.5
.217
2.65
.104
6
Do not Connect
SS
12.52
.493
10.7
.421
5
.197
7
Do not Connect Do not Connect
SDA MOSI
16
.630
16.5
.650
8
1
2
3
4
2.17
.086
2.54
.100
0.25
.010
2.54
.100
3.12
.123
7.62
.300
17.7
.697
3
.118
14.2
.559
0.7
.028
2.1
.083
6.29
.248
7.99
.315
0.46
.018
All Sensors
1.27
.050
TITLE:
F-Series Package
NOTES
1) Dimensions are in inches [mm].
2) For suggested pad layout, see drawing: PAD-29.
SIZE FILE NAME
F1SL Package
A
I2C
Definition
Vs
SPI
Definition
Vs
B Port
High Pressure
Pin
1
2
3
4
5
6
7
8
Gnd
Gnd
Vout
Vout
MISO
CLK
12.7
.500
Do not Connect
SCL
2.68
.106
1
.039
8
7
6
5
5.5
.217
Do not Connect
SS
2.65
.104
12.52
.493
10.7
.421
Do not Connect Do not Connect
SDA MOSI
16
.630
16.5
.650
1
2
3
4
2.17
.086
2.54
.100
0.25
.010
2.54
.100
3.12
.123
7.62
.300
17.7
.697
3
.118
14.2
.559
0.7
.028
2.1
.083
6.29
.248
7.99
.315
All Sensors
0.46
.018
TITLE:
1.27
.050
F-Series Package
NOTES
1) Dimensions are in inches [mm].
2) For suggested pad layout, see drawing: PAD-29.
SIZE FILE NAME
FNSL Package
A
ELVR Series Analog & Digital Pressure Sensors
Page 19
Table of Contents
Package Drawings (Cont’d)
B Port
High Pressure
I2C
Definition
Vs
SPI
Definition
Vs
Pin
1
2
Gnd
Gnd
3
Vout
Vout
MISO
CLK
12.7
.500
Do not Connect
SCL
4
2.68
.106
1
.039
8
7
6
5
5
5.5
.217
Do not Connect
6
SS
2.65
.104
15.12
.595
Do not Connect Do not Connect
SDA MOSI
10.7
.421
7
16.5
.650
16
.630
8
1
2
3
4
2.17
.086
2.54
.100
2.54
.100
0.25
.010
3.12
.123
7.62
.300
17.7
.697
3
.118
14.2
.559
0.7
.028
4.76
.188
2.1
.083
All Sensors
0.46
.018
TITLE:
1.27
.050
F-Series Package
NOTES
1) Dimensions are in inches [mm].
2) For suggested pad layout, see drawing: PAD-28.
SIZE FILE NAME
FNSJ Package
A
All Sensors
DS-0375 Rev A
Page 20
Table of Contents
Product Labeling
Company
All Sensors
ELVR-L01D-
F1RS-C-
Part Number
NI3F
R18D21-12
Lot Number
Example Device Label
Suggested Pad Layouts
.035 .039 inch
~
(Finished Size)
0.035~0.039 inch
(Finished Size)
16.26
0.640
PAD-01
PAD-27
3.05
0.120
2.29
0.090
14.48
0.570
15.24
0.600
PAD-29
PAD-28
All Sensors reserves the right to make changes to any products herein. All Sensors does not assume any liability arising out of the application or use of any product or circuit
described herein, neither does it convey any license under its patent rights nor the rights of others.
ELVR Series Analog & Digital Pressure Sensors
Page 21
Table of Contents
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明