FWFTV22G [AMPHENOL]

Telecom and Datacom Connector;


型号：	FWFTV22G
厂家：	Amphenol
描述：	Telecom and Datacom Connector
文件：	总4页 (文件大小：1554K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

ROHS

COMPLIANT

FWF TV

IEEE 1394A Connection System for Harsh Environments

With FW Field, you can insert a standard IEEE1394A cordset into a metallic

plug which will protect it from shocks, dust and fluids.

No hazardous on-field cabling and grounding!

This metallic plug is connected into a receptacle, using a Tri Start Thread

coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling

device for high vibrations.

Main characteristics

No assembly tools required

Sealed against fluids and dusts (IP68)

ꢀNo time-consuming in-field cabling operation necessary

ꢀꢀTri-start thread coupling mechanism (MIL-DTL-38999 series III type)

with anti-decoupling device

Applications

Embedded Computers

Video

Railways

Battelfield Communication Systems

Naval & Shipboard Systems

Robotics & Automation

Process Control

ꢀFW plug retention in the receptacle: 100 N in the axis

ꢀMating cycles: 500 minimum

ꢀImproved EMI protection

Rugged Communications

Environmental Protection

ꢀSealing (mated): IP68 (Temporary immersion - 1 meter up to 30 minutes)

ꢀSalt Spray:

48 h with Nickel plating

> 500 h with Olive Drab Cadmium

ꢀFire Retardant / Low Smoke: UL94 V0 and NF F 16 101 & 16 102

ꢀVibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s

ꢀꢀShocks: IK06: weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated

pair)

ꢀHumidity: 21 days, 43°C, 98% humidity

ꢀTemperature Range: - 40°C / +85°C

Data Transmission

IEEE 1394a-2000

400 Mbits/second over 4.5 meters

Part Number Code

Series

IEEE1394 Field TV

FWF TV

Shell Type

Plug

Square Flange Receptacle

2PE:

Square flange receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2)

Jam Nut Receptacle

Jam nut receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2)

7PE:

Back Terminations (Receptacles only)

IEEE 1394 receptacle

Solder Board (6 tinned holes)

Shell Plating

Nickel - ROHS Compliant

Olive Drab Cadmium

Examples:

- Olive Drab Cadmium Plug: FWF TV 6G

- Olive Drab Cadmium Square Flange Receptacle, IEEE 1394 front & back: FWF TV 21G

- Olive Drab Cadmium Jam Nut Receptacle, IEEE 1394 front and back: FWF TV 71G

- Nickel Jam Nut Receptacle, solder board termination: FWF TV 72N

140

Plug

Shell type 6

FWF TV 6 X

Receptacles

Square flange receptacle

4 mounting holes: Shell type 2

FWF TV 2 XX

Panel Drilling

33.8 [1.332]

ꢀJam nut receptacle

Hexagonal Nut mounting: Shell type 7

FWF TV 7 XX

Panel Drilling

86.9 [3.422]

Receptacles with backshell:

Shell type 2PE and 7PE

Backshell used with IEEE 1394

Receptacle with back-termination - (Type 1)

Non sealed version

Backshell used with PCB

Receptacle with back-termination - (Type 2)

Receptacle back- termination - (Type 2)

Sealed version - IP67

Non sealed version

Sealed version – IP67

Same panel drilling as FWFTV 2xx

FWF TV 2PE & 7PE Type 1

FWF TV 2PE & 7PE Type 2

Panel Drilling (for type 2 only)

Back Terminations

View of the PCB Type 2

version - with 6 tinned holes for

solder termination

Type 1: IEEE 1394 Receptacle

Type 2: Solder 6 Tinned holes for soldering

141

Assembly Instructions

Can be used with most IEEE 1394 cordset brands: No tools required!

Plug Assembly

1. If a fully sealed (IP68) assembly is required: Install the white tape

around the plug to cover the 4 holes of the overmolding. If there

are no holes omit this step.

2. Insert the black O Ring around the front face of the IEEE 1394

plug. This O Ring will ensure the seal.

3. Insert the IEEE 1394 cordset into the metallic backshell.

4. Insert the retention spacer laterally onto the cable (this spacer is

soft so as to adapt to various overmolding styles) and slide the

IEEE 1394 plug into this retention spacer.

5. Insert the friction ring laterally onto the cable cordset.

6. Insert the IEEE 1394 plug into the metallic circular shell. Note at

this step that the main key is used for polarization.

7. Screw the backshell on the plug body. A spanner may be required

to fully close the backshell to the circular shell.

Important Note: The sealing of the connector is not done by the

black retention spacers which are slotted, but rather by the front

face O-Ring (Fig 2).

Receptacle Assembly

To Solder your cable onto the PCB:

1. Attach the 2 metallized plastic inserts around the PCB (Fig 1a &

1b).

2. Insert the IEEE 1394 module from the rear of the connector.

Removing Modules

1. Insert the removal tool FWF ODE

from the front

2. Push the module back with thumb.

Accessories

Metallic Caps

FWF TVC

Connector Type

Plug

Square Flange Receptacle

Jam Nut Receptacle

Shell plating

Nickel - ROHS Compliant

Olive Drab Cadmium

Panel Gasket for square flange receptacle

(Thickness: 0,8 mm [.031]): JE15

Receptacle Insert removal tool: FWF ODE

142

ROHS

COMPLIANT

N & B

IEEE1394 Receptacle with Self Closing Cap

This Self Closing Cap automatically protects the IEEE1394 square flange receptacles (MIL-C-26482 type), protecting your

system from dust and water projections. The same cap can be used to protect RJ45, USB and USBB receptacles. A spring

automatically closes the upper part of the cap when either the RJ Field plug, RJ45 cordset, USB or IEEE1394 cordset, or USB

key are removed from the receptacle.

FWF 21 X SCC

[1.417]

Version IEEE1394

Plating

Black coated

Metallized inserts (EMI)

Part

number *

FWF 21B SCC

FWF 21N SCC

FWF 21G SCC

No (blank insert)

Nickel plated

Yes

Olive drab cadmium plated

* The part number includes the receptacle + the self closing cap

n Note: Panel gasket with any of these receptacles: JE18

RJF 21 X SCC, USBF 21 X SCC, USBBF 21 X SCC

RJ45 version

USB-B version

USB2.0 & 3.0 - A version

(see page 25)

(see pages 94 & 107)

(see page 118)

143

相关型号：