LMD-06RJ7 [AMPHENOL]
Connector Accessory;型号: | LMD-06RJ7 |
厂家: | Amphenol |
描述: | Connector Accessory 连接器 连接器支架 |
文件: | 总5页 (文件大小:1063K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Amphenol® LMD and LMS Modular Connectors
for Rack & Panel or Cable Attachment
INTRODUCTION: FEATURES, BENEFITS, PERFORMANCE
LMD Modular Connectors
The LMD Connector Series was designed by Amphe-
nol Pyle-National to provide flexibility in the assembly
of wire harnesses that are used in instrumentation and
avionic control environments. The modular design of
the LMD provides rack and panel or cable to cable
attachment.
Design Features of LMD Connectors
•
An LMD Connector is comprised of a housing,
modules and contacts - each ordered separately,
requiring assembly
•
Lightweight housings are offered in two materials
• standard black thermoplastic
LMD Receptacle and Plug
• high performance composite material for EMI
shielding
• white thermoplastic nylon material with increased
solvent resistance
LMD Benefits
•
•
•
•
•
•
Reduces assembly and production costs
Eliminates costly PC board and associated hardware
Reduces inventory levels and associated costs
Allows for a variety of circuit configurations
Permits ease of circuit upgrading
•
Four standard modules are available with the
following contact arrangements: 1 #8, 4 #16, 9 #20,
16 #22
•
•
•
Modules are available in sealed and unsealed
versions
Facilitates equipment maintenance
Linear module design may be used for rack and
panel or cable to cable applications
LMD Performance Characteristics
Bussing modules available to allow for a plurality of
circuit network configurations without extra
hardware
Temperature Rating
–55° C to +140° C (-67 ° F to + 284° F)
Insulation Resistance
(min.)
5000 megohms initial: 1000 megohms after 96
hours humidity
•
•
Diode modules provide a current protection system
for avionic instrumentation packages and eliminate
the need for dedicated PC boards and other
hardware
Durability
Vibration
250 cycles (mating and unmating)
Maximum discontinuity of one microsecond
when subjected to sinusoidal vibration of 10 to
2000 Hz at 15 gravity units
Maximum discontinuity of one microsecond
when subjected to 1/2 -sine-wave transient
shock of 50 gravity units with pulse duration of
11 milliseconds
Miniature relay modules can be added which
eliminate the need for printed circuit boards and
hardware
Physical Shock
Module Insertion &
Removal Force
5 lbs. maximum
70 lbs. minimum
Module Retention
LMS Modular Connectors
Supplementing the LMD connector family, Amphenol/Pyle
National offers the LMS in-line splice connector; a low cost
interconnects that incorporates the LMD modules and contacts.
•
•
Standard LMS splice connector - 3-piece assembly with
module removal tool access
Tool-less splice connector - 3-piece assembly with a
push-button module release for easy module removal
•
•
Two-piece bracket available for panel mounting
Used in wire harness, instrument and equipment
terminations and test points
LMS Tool-less Splice Connector
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
LMD Modular Connectors
FEATURES, OPTIONS & CONTACT DATA
LMD Plug
LMD Receptacle
Optional Keying
Post (Six position
keying capability)
Optional
Center
Jackscrew
Strain Reliefs
Pin or Socket Modules
(may be intermixed in plug
or receptacle housings
Module
Sealed or unsealed, accept rear release #8, #16, #20
and #22 gauge contacts (See pages 103-105 for the
variety of module types available)
Variety of Contacts
available. (accept #8
through #28 AWG wire)
LMD Features and Options
Contact Data
LMD’s module options provide a mix of both active and
passive devices within one connector. The features and
options of this series describe the design flexibility in this
connector series:
Contact Resistance
Dielectric
Withstand- Recommended
ing Voltage Working Voltage
Max.
Contact Wire
Test Current Max.
(amperes) Millivolts
Size
Size
AC (RMS)
AC (RMS)
•
LMD Standard components are molded of a U/L rated
94VO flame retardant, light-weight thermoplastic material.
Alternate white nylon material (provides resistance to
industrial oils and solvents) is available; consult Amphenol
Aerospace for availability.
22
28
5.0
1.5
73
54
22
20
16
8*
8
1800
600
20
24
7.5
3.0
55
45
1800
2300
2300
2300
600
900
900
900
16
20
13.0
7.5
49
46
•
•
•
•
•
•
The linear LMD connector may be used for rack and panel
or cable-to-cable applications.
12
14
23
17
42
40
Plug and receptacle housings may be front or rear panel
mounted.
8
10
46
33
26
28
Optional keying post provides six position keying
capability.
The optional center jackscrew provides ease of mating
and unmating and insures high reliability under vibration.
Contact Crimp
Tensile Strength
Contact Wire
Max.
Wire Insulation
Size
Size
Cable strain reliefs are available for internal attachment.
(See page 107).
Lbs. Min.
28
26
24
22
24
22
20
20
18
16
3
5
8
12
8
12
20
20
30
50
Variety of module types. Sealed and unsealed modules
accept rear release #8, #16, #20 and #22 gauge contacts.
Bussing, diode and relay modules available. PC tail
contacts are also available; consult Amphenol Aerospace.
22
.054
20
16
.083
.103
•
•
•
A variety of contacts accept #8 through #28 AWG wire.
Commercially available automated crimp terminating
equipment may be used.
Wired or unwired modules are rear inserted and held by
two retention tines. With the aid of a front release tool, the
modules are easily removed from the rear. (See pg. 107).
14
12
70
110
8*
8
.255
.255
10
8
150
220
Pin or socket modules may be intermixed in plug or
receptacle housings.
* with #12 wire well
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
LMD Modular Connectors
LMD HOUSINGS - HOW TO ORDER
HOW TO ORDER LMD HOUSINGS
Housings are ordered separately from modules and contacts. Housings
are available with 6 bays. Typical housing part number is shown as follows:
1.
2.
3.
4.
5.
6.
Housing
Material
Number
of Modules
Connector
Type
Coupling
Mechanism
Alternate
Keying
1. Connector Type
LMD
6
-0
P
J
3
LMD
2. Housing Material
RECEPTACLE HOUSING
6 BAY
0
designates standard black thermoplastic
designates white thermoplastic nylon material -
consult Amphenol for availability
F
5.045 (128.14)
.740
(18.80)
4.695 (119.25)
3. Number of Modules
A
B
C
D
E
F
cavities in plug or receptacle
housing (available in 6 only)
4
1
6
4.320 (109.73)
4. Connector Type
.175 (4.45) REF.
MOUNTING HOLE
FOR #8 SCREW TYPICAL
KEY POSITION INDICATOR
(6 KEY POSITIONS)
P
R
designates plug
designates receptacle
#12-24 THREAD
.944
(23.98)
5. Coupling Mechanism
1.100
(27.94)
J
K
E
designates jack-socket, rotating
designates jack-screw, fixed
designates without coupling mechanism
#10-32 NUT
FOR CHANGING
KEY POSITION
JACK SCREW
KEYING MECHANISM
6. Alternate Keying
3
6 positions of keying post: 1, 2, 3, 4, 5 or 6
designates keying hardware shipped unassembled
for field assembly
7
designates no alternate keying hardware. Keyed
through housing only.
8
PLUG HOUSING
6 BAY
Ordering information on modules, contacts and
strain reliefs is given on other pages of this LMD
catalog section that follow.
5.045 (128.14)
4.695 (119.25)
.740
(18.80)
F
E
D
C
B
A
4
1
4.320 (109.73)
.175 (4.45) REF.
MOUNTING HOLE
FOR #8 SCREW TYPICAL
KEY POSITION INDICATOR
(6 KEY POSITIONS)
#12-24 THREAD
1.000
(25.40)
.844
(21.44)
JACK SOCKET
KEYING MECHANISM
.375 (9.53) HEX
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
LMD Modular Connectors
MODULE CONTACT ARRANGEMENTS
Modules and contacts for LMD connectors are sold separately
from housings.
Pin Contact Size 22
Part number: LMD-4022-36LJ
Modules with 16 Size 22 Contacts
.830 MAX.
(21.06) MAX.
POLARIZING
KEYWAY
POLARIZING
KEYWAY
.589 (14.96)
.047
(1.19)
4
8
3
7
2
6
1
1
5
2
6
3
7
4
4
8
3
7
2
6
1
1
5
2
6
3
7
4
.174 (4.42)
5
9
8
5
9
8
.450
(11.43)
.500
(12.70)
.450
(11.43)
.450
(11.43)
.500
(12.70)
.450
(11.43)
12 11 10
9
10 11 12
12 11 10
9
10 11 12
16 15 14 13
13 14 15 16
16 15 14 13
13 14 15 16
.030
(0.76)
GREEN INK
STRIPE
.061 (1.55)
.450
(11.43)
.450
(11.43)
.450
(11.43)
.450
(11.43)
INTERFACIAL
SEAL
LOCATING
SHOULDER
LOCATING SHOULDER
Socket Contact Size 22
Part number: LMD-4122-96LD
1.117
(28.37)
.995
(25.27)
.648
(16.46)
.573
(14.55)
.563
(14.30)
.865
(21.97)
.863 MAX.
(21.92) MAX.
.047
(1.19)
.621 (15.77)
RETENTION
TINE
.132
(3.35)
.132
(3.35)
WIRE
SEAL
RETENTION
TINE
.061
(1.55)
GREEN INK
STRIPE
Socket
Module
Pin
Module
Sealed Socket
Module
Sealed Pin
Module
Contact Finish: Gold Plated
Part number: Part number:
LMD-3003-S LMD-3003-P
Part number:
LMD-4003-S
Part number:
LMD-4003-P
Pin Contact Size 20
Part number: LMD-4020-96LD
Modules with 9 Size 20 Contacts
Thermocouple
POLARIZING
KEYWAY
POLARIZING
KEYWAY
Part Number: LMD-4020-10( )*
.720 MAX.
(18.29) MAX.
3
6
9
2
5
8
1
4
7
1
4
7
2
5
8
3
6
9
3
6
9
2
5
8
1
4
7
1
4
7
2
5
8
3
6
9
.450
(11.43)
.500
(12.70)
.450
(11.43)
.450
(11.43)
.500
(12.70)
.450
(11.43)
.077
(1.96)
.546 (13.87)
.031 (0.79)
.450
(11.43)
.450
(11.43)
.450
(11.43)
.450
(11.43)
INTERFACIAL
SEAL
LOCATING
SHOULDER
.040
(1.02)
LOCATING SHOULDER
.1015 (2.58)
RED INK
STRIPE
1.117
(28.37)
.995
(25.27)
.648
(16.46)
Socket Contact Size 20
Part number: LMD-4120-96LD
.573
(14.55)
.563
(14.30)
.865
(21.97)
Thermocouple
Part Number: LMD-4120-10( )*
RETENTION
TINE
.132
(3.35)
.132
(3.35)
WIRE
SEAL
RETENTION
TINE
.656 MAX.
(16.56) MAX.
.077
.482 (12.24)
(1.96)
Socket
Module
Pin
Module
Sealed Socket
Module
Sealed Pin
Module
.031 (0.79)
Part number: Part number:
LMD-3001-S LMD-3001-P
Part number:
LMD-4001-S
Part number:
LMD-4001-P
.077
(1.96)
RED INK
STRIPE
.1015
(2.58)
Contact Finish: Gold Plated
*Complete thermocouple part number with
code letter for desired contact material as
follows:
Module part numbers are for black thermoplastic material. Consult Amphenol
Aerospace for availability of any other module materials.
P = Chromel
R = Alumel
N = Constantan
C = Copper
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
LMD Modular Connectors
MODULE CONTACT ARRANGEMENTS, CONT.
Modules and contacts for LMD connectors are sold separately
from housings.
Pin Contact Size 16
Part number: LMD-4016-96LD
Thermocouple
Part Number: LMD-4016-10( )*
Modules with 4 Size 16 Contacts
.821 MAX.
(20.85) MAX.
POLARIZING
KEYWAY
POLARIZING
KEYWAY
.132
(3.35)
.561 (14.25)
1
3
2
4
2
1
1
3
2
2
1
.046 (1.17)
.450
(11.43)
.500
(12.70)
.450
(11.43)
.450
(11.43)
.500
(12.70)
.450
(11.43)
4
3
4
4
3
.062
(1.57)
.450
(11.43)
.450
.450
(11.43)
.450
.102
(2.59)
BLUE INK
STRIPE
(11.43)
(11.43)
INTERFACIAL
SEAL
LOCATING
SHOULDER
LOCATING SHOULDER
Socket Contact Size 16
Part number: LMD-4116-96LD
1.141
(28.98)
.995
(25.27)
.648
(16.46)
.573
(14.55)
.563
(14.30)
.889
(22.58)
Thermocouple
Part Number: LMD-4116-10( )*
.821 MAX.
(20.85) MAX.
RETENTION
TINE
.156
(3.96)
.156
(3.96)
WIRE
SEAL
RETENTION
TINE
.132
(3.35)
.497 (12.62)
.046 (1.17)
Socket
Module
Pin
Module
Sealed Socket
Module
Sealed Pin
Module
.112
(2.84)
.102
(2.59)
BLUE INK
STRIPE
Part number: Part number:
LMD-3005-S LMD-3005-P
Part number:
LMD-4005-S
Part number:
LMD-4005-P
Contact Finish: Gold Plated
*Complete thermocouple part number with
code letter for desired contact material as
follows:
P = Chromel
R = Alumel
N = Constantan
C = Copper
Modules with 1 Size 8 Contacts
Pin Contact Size 8
Part number: LMD-4008-36L
POLARIZING
KEYWAY
.959 MAX.
(24.36) MAX.
1
1
.450
(11.43)
.500
(12.70)
.450
(11.43)
.559 (14.20)
.046 (1.17)
.450
(11.43)
.450
(11.43)
.3045 .231
(7.73) (5.87)
LOCATING SHOULDER
.142
(3.61)
1.141
(28.98)
.819
(20.80)
.719
(18.26)
Socket Contact Size 8
Part number: LMD-4108-36L
.895 MAX.
(22.73) MAX.
.156 (3.96)
.156 (3.96)
.495 (12.57)
.406 DIA.
(10.31 DIA.)
.406 DIA.
(10.31 DIA.)
.046 (1.17)
RETENTION
TINE
.3045 .231
(7.73) (5.87)
.257
(6.53)
Socket
Module
Pin
Module
Part number: Part number:
LMD-3004-S LMD-3004-P
Contact Finish: Gold Plated
Module part numbers are for black thermoplas-
tic material. Consult Amphenol Aerospace for
availability of any other module materials.
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
相关型号:
©2020 ICPDF网 联系我们和版权申明