MTS360-2PP-W359359-C0002-ERA016-05K [AMPHENOL]

Hall Effect Sensor, Rectangular, Surface Mount, PACKAGE-8;


型号：	MTS360-2PP-W359359-C0002-ERA016-05K
厂家：	Amphenol
描述：	Hall Effect Sensor, Rectangular, Surface Mount, PACKAGE-8
文件：	总5页 (文件大小：290K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Mechatronics

Electromechanical

Sensors

Controls

Magnetic rotary angle and position sensor-control.

Contactless sensor.

MTS-360

Key features

• Simple & Robust magnetic design.

• Endless rotation.

• Programmable switch output.

• Programmable Linear Transfer

Characteristic:

(some positive slopes & one negative

slope can be programmed in the

same transfer characteristic;

up to 4 programmable points; see

last page)

The MTS-360 provides a true breakthrough in contactless sensor technology by combining a through-shaft design with 360º absolute

position feedback in an ultra miniature size. The result is the smallest fully featured rotary sensor on the market with reliability up

to 50 million cycles.

• Self-diagnostic features

• Over voltage protection and

reverse voltage protection.

With its tiny size of only 6mm x 17mm x 18mm (HxWxL), engineers can now integrate a fully featured rotary sensor directly on their

PCB without the packaging issues that typically accompany encoders or other absolute position devices. The exceptionally low profile

fits easily in places that were previously too small for pre-packaged rotary sensors.

Also upon request:

This ultra-miniature MTS-360 Rotary Position Sensor is ideal in optical imaging stabilization and precision biomedical devices, optical

zoom devices, consumer electronics, instrumentation, HVAC systems, automotive

• True full redundant version.

control systems, marine controls, fork lift trucks, farm equipment, cranes, low speed motor feedback, valve position sensors and

robotic and automation feedback system.

Applications

Mechanical specifications

• Non-Contacting long life

angle/position sensor.

Rotational life

(depends on application and mounting)

up to 50.000.000 cycles.

• Absolute rotary position sensor

• Pedal position Sensor.

Operating temperature

Sealing

up to -40ºC to +125ºC

IP50

• Turn counter.

• Throttle/EGR valve and gear

position sensor.

• Height & suspension sensor.

• Non-contacting potentiometer.

• Float-level sensor.

Electrical specifications

Linearity 1,2

Angular range

Output

±1% absolute (±0.5% check availability).

• Motor-shaft position sensor.

• Precision robotics, material

handling, industrial equipment,

HVAC monitoring & control, etc.

Programmable from 15 to 360 degrees (without dead band).

Analog (Ratiometric), PWM, Serial Protocol.

Switch output

Yes, programmable.

Angular Resolution

(depends on electrical angle and rotational speed)

Analog & PWM: up to 12 bits.

Serial Protocol (SPI): up to 14 bits.

Supply voltage

Supply current

5V ±10%

Typ 8.5mA for single version

Typ 17mA for redundant version

1 Others check availability.

Ferromagnetic materials close to the sensor (i.e. shaft, mounting surface) may affect the sensor’s linearity. Please contact Piher for advise.

Piher Sensors & Controls

Our product competencies and services:

Potentiometers | Position / angle sensors | Rotary switches | Incremental encoders

Printed circuit resistors | Mechatronics | Value added assemblies

-Page 1 of 5-

Mechatronics

Electromechanical

Sensors

Controls

Magnetic rotary angle and position sensor-control.

Contactless sensor.

MTS-360

How to order.

Simple output (analogic / PWM)

_ _ _ _ _ _

MTS360

_ _ _ _ _

_ _ _ _ _ _

_ _

_ _ _ _

Series

Voltage

supply

Switch

001

016

...

Electrical

rotation

angle

Output

function

PWM

Switch

Type

Output1

Temp. range

Frecuency (Hz.)

1 = simple

[empty] = none

W = switch

E = -40 to +85ºC

K= -40 to +125ºC

A = Analogic

P = PWM

C0000

C0001

F100

...

ERA015

ERA016

....

(see note 1)

F999

(see note 3)

316

359

(see note 4)

ERA360

(see note 2)

Simple output (SPI)

MTS360

_ _ _ _ _

_ _ _ _ _ _

_ _

Series

Electrical

rotation

angle

Output

function

Voltage

supply

Type

Output1

S = SPI

Temp. range

1 = simple

E = -40 to +85ºC

K= -40 to +125ºC

C0000

C0001

ERA015

ERA016

....

(see note 3)

ERA360

Redundant output (analogic / PWM)

_ _ _ _ _ _

_ _

_ _ _ _ _

_ _ _ _ _ _

_ _

MTS360

_ _ _ _

PWM

_ _ _ _

Series

Switch1

001

016

...

Switch2

001

016

...

Voltage

supply

Electrical

rotation

angle

Output

function

PWM

Switch1

Switch2

Type

Frecuency (Hz.)1 Frecuency (Hz.)2

[empty] = none

W = switch

[empty] = none

W = switch

2 = redundant

C0002

C0003

F100

...

F999

F100

...

F999

ERA015

ERA016

....

(see note 3)

Outputs

316

359

316

359

(see note 4)

ERA360

AA = Analogic

PP = PWM

Temp. range

(see note 2)

E = -40 to +85ºC

K= -40 to +125ºC

(see note 1)

Redundant output (SPI)

_ _

_ _ _ _ _

_ _ _ _ _ _

_ _

MTS360

Series

Voltage

supply

Electrical

rotation

angle

Output

function

Type

Outputs

SS = SPI

Temp. range

E = -40 to +85ºC

K= -40 to +125ºC

2 = redundant

C0002

C0003

ERA015

ERA016

....

(see note 3)

ERA360

Other product configurations will be studied case by case.

Notes

(1) The analog output is a ratiometric output, proportional to input supply voltage.

(2) Leave empty if no applicable.

Switch function diagram:

Positive slope

Negative slope

SW On

SW Off

SW On

SW Off

360º

(3) Other output functions available check availability.In the How To Order reference, enter CXXXX meanwhile the new output function reference is not defined.

(4) Leave empty if no applicable. Default frequency is 200 Hz

Piher Sensors & Controls

Our product competencies and services:

Potentiometers | Position / angle sensors | Rotary switches | Incremental encoders

Printed circuit resistors | Mechatronics | Value added assemblies

-Page 2 of 5-

Mechatronics

Electromechanical

Sensors

Controls

Magnetic rotary angle and position sensor-control.

Contactless sensor.

MTS-360

Options.

• Special outputs slopes and protocols.

• Full redundant version with switches.

• Energy harvesting versions.

• Fast versions.

• Connectors.

• IP sealing.

• Shaft interfaces.

• Contact the factory for other options.

Dimensions.

Rotor is shown at zero position.

Sensor is delivered at random

position.

8.5

2.3

4.05

1.15

2.2

3.05

1.6

11.6

Recommended shaft.

-0.05

Piher Sensors & Controls

Our product competencies and services:

Potentiometers | Position / angle sensors | Rotary switches | Incremental encoders

Printed circuit resistors | Mechatronics | Value added assemblies

-Page 3 of 5-

Mechatronics

Electromechanical

Sensors

Controls

Magnetic rotary angle and position sensor-control.

Contactless sensor.

MTS-360

Mounting instructions.

Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).

Always observe Electro Static Discharge control procedures whenever handling semiconductor products.

Recommended reflow profile.

Heat used to

melt solder

paste

Max. temp 250ºCs

200ºC*

30-45 s

Preheat temp. 150ºC*

Between 60-120 s

Room temp.

* Melting point temp. depends on solder properties

The recommended reflow profile is provided as a guideline. Optimal profile may differ due to oven type, assembly layout or other design or process variables.

Customers should verify actual device performance in their specific application and reflow process. Please contact Piher if you require additional support.

Connections scheme.

Simple analog output version connection scheme.

Description

Supply voltage

Switch output*

Signal output**

Ground

7 6 5

Ground

2 3 4

* If the feature is not used in the application, please connect to ground

** Piher can supply the recommended wiring diagram

Piher Sensors & Controls

Our product competencies and services:

Potentiometers | Position / angle sensors | Rotary switches | Incremental encoders

Printed circuit resistors | Mechatronics | Value added assemblies

-Page 4 of 5-

Mechatronics

Electromechanical

Sensors

Controls

Magnetic rotary angle and position sensor-control.

Contactless sensor.

MTS-360

Output.

C0002 (redundancy)

C0000

100%

90%

50%

10%

0º

90º

180º

270º

360º

0º

90º

180º

270º

360º

C0003 (redundancy)

C0001

100%

90%

50%

45%

20%

10%

0º

90º

180º

270º

360º

0º

90º

180º

270º

360º

Disclaimer

The product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate design information.

Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Piher”), disclaim any and all liability for any errors,

inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described herein.

Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by

law. The product specifications do not expand or otherwise modify Piher’s terms and conditions of sale, including but not limited to the warranty expressed therein, which apply

to these products.

No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Piher.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Piher

products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Piher for any damages arising or resulting from such use

or sale. Please contact authorised Piher personnel to obtain written terms and conditions regarding products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Information contained in and/or attached to this catalogue may be subject to export control regulations of the European Community, USA, or other countries. Each recipient of this

document is responsible to ensure that usage and/or transfer of any information contained in this document complies with all relevant export control regulations. If you are in any

doubt about the export control restrictions that apply to this information, please contact the sender immediately. For any Piher Sensors & Controls SA. Exports, Note: All products

/ technologies are EAR99 Classified commodities. Exports from the United States are in accordance with the Export Administration Regulations. Diversion contrary to US law is

prohibited.

Piher is an AmphenolTM company.

Contact

ISO 14001

BUREAU VERITAS

Certification

Tel: +34-948-820450

Note: All Piher products can be adapted to meet customer´s requirements.

Due to continuous process improvement, specifications are subject to change without notice.

Please always use the datasheets published at our website www.piher.net for the most up-to-date information.

sales@piher.net

www.piher.net

v261118

Piher Sensors & Controls

Our product competencies and services:

Potentiometers | Position / angle sensors | Rotary switches | Incremental encoders

Printed circuit resistors | Mechatronics | Value added assemblies

-Page 5 of 5-

MTS360-2PP-W359359-C0002-ERA016-05K [AMPHENOL]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E