NPC-1210-015-A-3-L [AMPHENOL]
ABSOLUTE, PEIZORESISTIVE PRESSURE SENSOR, 0.5%, 75-150mV, SQUARE, THROUGH HOLE MOUNT, DIP-8;型号: | NPC-1210-015-A-3-L |
厂家: | Amphenol |
描述: | ABSOLUTE, PEIZORESISTIVE PRESSURE SENSOR, 0.5%, 75-150mV, SQUARE, THROUGH HOLE MOUNT, DIP-8 输出元件 传感器 换能器 |
文件: | 总4页 (文件大小:298K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NPC-1210 Series
NovaSensor Medium/Low
Pressure Sensors
Features
Applications
• High sensitivity
• High accuracy
• Interchangeable
• Industrial automation
•ꢀAirꢀflowꢀmonitors
• Process control
• Temperature compensated 0°C to 60°C (32°F to
140°F)
• Medical equipment
• Underground cable leak detection
• Ventilation
• PCB mountable package
• DIP package
• Solid-state reliability
• Individual device traceability
• Respirator monitoring
Amphenol
Advanced Sensors
NPC-1210ꢀSeriesꢀSpecifications
Description
1
Pressure Sensor
-Out
+
-
-
A2
The NPC-1210 series of solid-state pressure sensors
are designed to provide a cost effective solution for
applications that require calibrated performance over
R
+In
5
100 kW
3.012V
4
1.5 mA
a wide temperature range. Packaged in a dual-in-line
Gain
Set
AmplifiedꢀFSO
configuration,ꢀtheꢀNPC-1210ꢀSeriesꢀisꢀintendedꢀforꢀ
printed circuit board mounting. Optional pressure port
andꢀleadꢀconfigurationsꢀprovideꢀsuperiorꢀflexibilityꢀinꢀ
lowꢀprofileꢀapplicationsꢀwhereꢀpressureꢀconnectionꢀ
6
100 kW
R
-
+
A3
+Out
+
I
3
orientation is critical.
-In
7ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ8ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ2
NC NC
The NPC-1210 series is based on NovaSensor’s
advanced SenStable® piezoresistive sensing
technology. Silicon micromachining techniques
are used to ion implant piezoresistive strain gages
intoꢀaꢀWheatstoneꢀbridgeꢀconfiguration.ꢀTheꢀNPC-
1210 Series offers the added advantage of superior
temperature performance over the temperature
compensated range of 0°C to 60°C (32°F to 140°F). A
gain set resistor is included to normalize the FSO for
fieldꢀinterchangeability.ꢀ
Ground
Lead
1
Connection
-Out
2
3
4
5,6ꢀ
7,8ꢀ
-In
+Out
+In
Gain-SetꢀResistor
NoꢀConnection
NPC-1210 Series Schematic Diagram
0.60 in (15.24 mm)
0.15 in
(3.8ꢀmm)
0.1 in
(2.54 mm)
8ꢀꢀꢀꢀꢀꢀ7ꢀꢀꢀꢀ6ꢀ 5
0.32 in
(8.1ꢀmm)
0.2 in
(5.1 mm)
G6
1
2
3
4
0.12 in (3.05 mm)
0.37 in (9.4 mm)
Diameter 0.127 in
(3.23ꢀmm),ꢀTwoꢀtubes
Used for positive differential (P2)
Not used
for gauge (P1)
Not used
for absolute
(1)
(3)
Ceramic
substrate
0.167 in
(4.2mm)
8Xꢀ0.07ꢀin
(1.78mm)
8Xꢀ0.34ꢀin
(8.6ꢀmm)
8Xꢀ0.02ꢀinꢀ(0.51ꢀmm)
1. All dimensions are for reference only.
2. Tube length: L = 0.49 in (12 mm), S = 0.33 in (8.3 mm), N = No tube
3. Lead pins can be either in the same or the opposite direction of the pressure tube. Option (1) has the leads
in the "Up" position, the same direction as the tube. Option (3) has the leads in the "Down" position, the
opposite direction from the tube.
4. Gauge and differential pressure devices are calibrated by applying pressure to the positive differential port (P2)
and venting to atmosphere the reference port (P1). Absolute pressure devices use only P1 to apply vacuum or
pressure.
NPC-1210 Series Package Diagram
ꢀꢀ
ꢀꢀ
ꢀꢀ
ꢀꢀ
•ꢀ15ꢀpsiꢀ(100ꢀkPa,ꢀ1.0ꢀbar)
•ꢀ30ꢀpsiꢀ(210ꢀkPa,ꢀ2.1ꢀbar)
•ꢀ50ꢀpsiꢀ(340ꢀkPa,ꢀ3.4ꢀbar)
•100ꢀpsiꢀ(690ꢀkPa,ꢀ6.9ꢀbar)
NPC-1210ꢀSeriesꢀSpecifications
Medium Pressure Sensors
Low Pressure Sensors
Pressure Ranges
Pressure Ranges
•ꢀGaugeꢀandꢀdifferential:ꢀ
•ꢀ Gaugeꢀandꢀdifferential:ꢀ
• 10 in H20ꢀ(2.5ꢀkPa,ꢀ0.025ꢀbar)ꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀ•ꢀ5ꢀpsiꢀ(34ꢀkPa,ꢀ0.34ꢀbar)
ꢀꢀ ꢀ•ꢀ15ꢀpsiꢀ(100ꢀkPa,ꢀ1.0ꢀbar)
ꢀꢀ ꢀ•ꢀ30ꢀpsiꢀ(210ꢀkPa,ꢀ2.1ꢀbar)
ꢀꢀ ꢀ•ꢀ50ꢀpsiꢀ(340ꢀkPa,ꢀ3.4ꢀbar)
ꢀꢀ ꢀ•ꢀ100ꢀpsiꢀ(690ꢀkPa,ꢀ6.9ꢀbar)
•ꢀAbsolute:ꢀ
ꢀ ꢀ
ꢀ•ꢀꢀ1ꢀpsiꢀ(6.9ꢀkPa,ꢀ0.069ꢀbar)
Parameter
Value
Units
Notes
Environmental
Temperature Range
Operating
–40 to 125 °C
0 to 60 °C
–55 to 150 °C
(-40° to 257°F)
(32°F to 140°F)
(–67 to 302 °F)
Compensated
Storage
•ꢀForꢀotherꢀpressureꢀranges,ꢀpleaseꢀcontactꢀNovaSensor.
Mechanical
Parameter
Value
Units
Notes
(0.005
lb)
Weight
2.5
g
Environmental
Temperature Range
Operating
Media
Compatibility
Compatible with
exposedꢀmaterials
7
–40 to 125 °C
0 to 60 °C
–55 to 150 °C
(-40° to 257°F)
(32°F to 140°F)
(–67 to 302 °F)
Positive
differential and
gauge ports
Dry gases
only
Compensated
Storage
Absolute.
negative
differential ports
Dry gases
only
Mechanical
(0.005
lb)
Weight
2.5
g
Parameter
Units
Minimum Typical
Maximum Notes
7
Media
Compatibility
Compatible with
exposedꢀmaterials
Performance Parameters *
FSO 10 inH2O
FSO 1 psi
mV
mV
mV
25
50
-2
50
75
—
70
110
2
2,ꢀ3
2,ꢀ3
3
Positive
differential and
gauge ports
Dry gases
only
Zero Pressure
Output
Absolute.
negative
differential ports
Dry gases
only
Linearity
%FSO
%FSO
-0.5
-0.1
—
—
0.5
0.1
4
Pressure
Parameter
Units
Minimum
Typical
Maximum
Notes
Hysteresis
Input
Impedance
W
2500
4000
-1.0
4000
5000
—
6000
6000
1.0
Performance Parameters *
FS Output (FSO) mV
75
-2
100
—
150
2
2,ꢀ3
Output
Impedance
W
Zero Pressure
Output
mV
3
Thermal
Accuracy–Span
%FSO
3,ꢀ5
Linearity
%FSO
%FSO
-0.1
-0.1
—
—
0.1
0.1
4,ꢀ8
Pressure
Thermal
Accuracy–Zero
%FSO
%/°C
-1.25
—
—
1.25
—
3,ꢀ5
Hysteresis
Input
Impedance
W
2500
4000
-0.5
4000
5000
—
6000
6000
0.5
Temperature
Coefficient–ꢀ
Resistance
0.22
5
Output
Impedance
W
Thermal
Hysteresis–Zero
%FSO
—
0.1
—
5
6
Thermal
%FSO
3,ꢀ5,ꢀ8
Accuracy–Span
InputꢀExcitationꢀ mA
—
1.5
—
2.0
—
Thermal
Accuracy–Zero
%FSO
%/°C
-0.5
—
—
0.5
—
3,ꢀ5,ꢀ8
Pressure
Overload
psi (bar)
5 (0.34)
Temperature
Coefficient–ꢀ
Resistance
0.2
5
* 1. Supply current = 1.5 mA and ambient temperature = 77°F (25°C),
unless otherwise noted. Gauge and differential pressure devices are calibrated
by applying pressure to the positive differential port (P2) and venting to
atmosphere the reference port (P1).
Thermal
Hysteresis–Zero
%FSO
—
0.1
—
5
6
2. Output span of unamplified sensor.
InputꢀExcitationꢀ mA
—
—
1.5
—
2.0
3. Compensation resistors are an integral part of the sensor package;
no additional external resistors are required. Pins 7 and 8 must be kept open.
The NPC-1210 is interchangeable only when used with the gain set resistor
shown in the schematic diagram. Maximum gain-set resistor mismatch is 2%.
4. Best fit straight line.
Pressure
Overload
Rated
3X
5. Temperature range 32°F to 140°F (0°C to 60°C), reference to 77°F (25°C).
6. 3X or 200 psi (13.78 bar) maximum, whichever is less.
7. Exposed materials are pyrex, ceramic, silicon, epoxy, RTV, and stainless steel.
8. 5 psi (0.34 bar) spec.: Linearity: 0.25 ±%FSO, TC-span:
0.75 ±%FSO, TC-zero: 0.75 ±%FSO. otherwise noted.
NPC-1210ꢀSeriesꢀSpecifications
Warranty
Ordering Information
Amphenol Advanced Sensors warrants its products
against defects in material and workmanship for 12
months from the date of shipment. Products not
subjected to misuse will be repaired or replaced.
Amphenol Advanced Sensors reserves the right
to make changes without further notice to any
productsꢀherein.ꢀNovaSensorꢀmakesꢀnoꢀwarranty,ꢀ
representation or guarantee regarding the suitability
ofꢀitsꢀproductsꢀforꢀanyꢀparticularꢀapplication,ꢀnorꢀ
does Amphenol Advanced Sensors assume any
liability arising out of the application or use of any
productꢀorꢀcircuitꢀandꢀspecificallyꢀdisclaimsꢀandꢀallꢀ
liability without limitation consequential or incidental
damages.ꢀTheꢀforegoingꢀwarrantiesꢀareꢀexclusiveꢀ
andꢀinꢀlieuꢀofꢀallꢀotherꢀwarranties,ꢀwhetherꢀwritten,ꢀ
oral,ꢀimpliedꢀorꢀstatutory.ꢀNoꢀimpliedꢀstatutoryꢀ
warrantyꢀofꢀmerchantabilityꢀorꢀfitnessꢀforꢀparticularꢀ
purpose shall apply.
The code number to be ordered may be specified as follows:
NPC-1210 (Medium Pressure)
Code
005
015
030
050
100
Pressure Range
5 psi (0.3 bar)
15 psi (1 bar)
30 psi (2 bar)
50 psi (3.4 bar)
100 psi (7 bar)
Code
Type
D
A
Differential
Absolute
Gauge
Code
1
ꢀ
ꢀ
Gꢀ
3
NPC-1210 - ___ -
number
___
-
___
-
*ꢀOrderꢀNPC-1210-XXXG-XNꢀinꢀplaceꢀofꢀNPC-1210-XXXD-XNꢀꢀꢀꢀꢀꢀꢀꢀ
The code number to be ordered may be specified as follows:
NPC-1210 (Low Pressure)
Code
10W
001
Pressure Range
10 in H2O (25 mbar)
1 psi (69 mbar)
Code
Type
Differential
Gauge
Code
1
D
Gꢀ
ꢀ
ꢀ
Lead Configurations
Up
Down
3
Code
L
S
Tube Options
Long
Short
NPC-1210 - ___ -
number
___
-
___
-
___
Typical model
www.amphenol-sensors.com
©ꢀ2017ꢀAmphenolꢀCorporation.ꢀAllꢀRightsꢀReserved.ꢀSpecificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.ꢀ
Other company names and product names used in this document are the registered trademarks or
trademarks of their respective owners.
Amphenol
Advanced Sensors
AAS-920-303D - 11/2017
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明