PPS-06TG05-06PA-003(976) [AMPHENOL]

Circular Connector, 6 Contact(s), Brass, Male, Plug, ROHS COMPLIANT;


型号：	PPS-06TG05-06PA-003(976)
厂家：	Amphenol
描述：	Circular Connector, 6 Contact(s), Brass, Male, Plug, ROHS COMPLIANT
文件：	总13页 (文件大小：1116K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Amphenol

PPS

Push Pull Series

The PPS is a miniature connector with push pull technology and RoHS compliant. It is

designed for use on equipment that is not submersed or left exposed to the elements for

prolonged periods, within Industrial and Ground Harsh Environment applications. To

mate, the plug is pushed onto the receptacle. The connector is locked in its rest position

and is released by pulling back the coupling nut.

The PPS has a small outside diameter and several inserts are available, including high-

density insert arrangements. The plugs can be fitted with EMC grounding fingers for

increased screening effectiveness. Amphenol Ltd offers full cable harness solutions with

overmoulding capabilities or, where preferred, a heat shrink boot can be used.

The plug has a black silver body and backshell with a black coupling nut. Other plating

finishes available are electroless nickel and both are chemical and NBC resistant.

Receptacles are available in black silver plating as standard and electroless nickel. All

metalwork is machined from brass for increased mating durability.

Amphenol

PPS - Insert Availability

RECEPTACLES – SOCKET CONTACTS ONLY

FRONT FACE VIEW

PPS 7 WAY

FRONT FACE VIEW

PPS 6 WAY

FRONT FACE VIEW

PPS 5 WAY

REAR FACE VIEW

PPS 7 WAY

REAR FACE VIEW

PPS 6 WAY

REAR FACE VIEW

PPS 5 WAY

PLUGS – PIN CONTACTS ONLY

FRONT FACE VIEW

PPS 5 WAY

FRONT FACE VIEW

PPS 7 WAY

FRONT FACE VIEW

PPS 6 WAY

REAR FACE VIEW

PPS 7 WAY

REAR FACE VIEW

PPS 6 WAY

REAR FACE VIEW

PPS 5 WAY

- 2 -

Insert Availability / Specifications

INSERT AVAILABILITY

5 # 22 AWG Contacts

05-05

05-06

05-07

6 # 22 AWG Contacts

7 # 22 AWG Contacts

CONTACT SPECIFICATIONS

Contact Resistance

5 mΩ initially

Less than 10 mΩ

Shell to Shell Conductivity

INSERT SPECIFICATIONS

Contact Arrangement

05-05 / 05-06 / 05-07

Working Voltage (Sea Level)

DWV (Sea Level)

115 Vac

500 Vac

1GΩ @ 500 Vdc

Insulation Resistance (Sea Level)

Current Rating (Individual Contact)

Current Rating (all Contacts Simultaneously)

ENVIRONMENTAL

-55^oC / +85^oC

Temperature

Salt Spray

500 hours subject to selected plating finish

As per MIL-C-26482 Series I

Fluids

Vibration and Shock

Sealing

MIL-C-26482 Series I

IP67 Unmated Bulkhead Connectors

IP64 Mated Pair Interface

MECHANICAL

Durability

Materials

1000 Matings

Shell : Brass – See Part No. information for plating options

Contacts : Turned, Gold Plated

Inserts and Seal : Proprietary Thermoplastic Polyester Elastomer

- 3 -

Table of Styles - Receptacles

PPS-07A05-XXSX-001(970)

Jam Nut Receptacle

PCB Contacts

.587

(14.80)

Ø .450 REF

(Ø 11.40)

.262

(6.65)

Ø .150 PCD

(Ø 3.80 PCD)

Ø .030

(Ø 0.78)

.393 A/F

(10.00 A/F)

Ø .300

(Ø 7.60)

.044

.152

.112

(2.85)

Panel Nut - Torque to 2.25Nm = 1.65 foot pounds force

All Dimensions are for reference only

(Dimensions in brackets are in mm)

PPS-07A05-XXSX-002(970)

Jam Nut Receptacle

Solder Bucket Contacts

.587

(14.80)

Ø .450 REF

(Ø 11.40 REF)

.262

(6.65)

.393 A/F

(8.60 A/F)

Ø .300

(Ø 7.60)

.831

(21.20)

Panel Nut - Torque to 2.25Nm = 1.65 foot pounds force

All Dimensions are for reference only

(Dimensions in brackets are in mm)

- 4 -

Table of Styles - Receptacles

PPS-01T05-XXSX-002(970)

In Line Receptacle

Solder Bucket Contacts

CRIMP FERRULE

.466

.770

.314 A/F

(8.00 A/F)

(11.85)

(19.60)

Ø .405

Ø .300

(Ø 10.30) (Ø 7.60)

Ø .150

(Ø 3.80)

All Dimensions are for reference only

(Dimensions in brackets are in mm)

PPS-02T05-XXSX-002(970)

2 Hole Mounting Receptacle

Solder Bucket Contacts

.240

(6.10)

.345

.841

CRIMP FERRULE

Ø .122

(21.40)

(8.75)

(Ø 3.10)

.240

(6.10)

.690

(17.50)

Ø .300

(7.60)

.405

.240

(6.10)

Ø .150

(Ø 3.80)

.314 A/F

(8.00 A/F)

.240

(6.10)

.050

(1.30)

.690

(17.50)

All Dimensions are for reference only

(Dimensions in brackets are in mm)

- 5 -

Table of styles - Receptacles

PPS-02A05-XXSX-001(970)

2 Hole Panel Mount Receptacle

Pin Tail Contacts

.240

(6 10)

.345

(8.75)

Ø .122

(Ø 3.10)

.030

(0.78)

.240

(6.10)

Ø .300

(7.60)

.337

(3.55)

.690

.240

Ø .150 PCD

(Ø 3.80 PCD)

.045

(1.15)

.475

(12.10)

.152

(3.85)

.256

(6.50)

.050

(1.30)

.240

(6.10)

.690

(17.50)

All Dimensions are for reference only

(Dimensions in brackets are in mm)

PPS-02A05-XXSX-002(970)

2 Hole Panel Mount Receptacle

Solder Bucket Contacts

.833

(21.25)

.240

(6.10)

.345

(8.75)

Ø .122

(Ø 3.10)

.240

(6.10)

.337

.690

(17.50)

Ø .300

(Ø 7.60)

.337

(3.55)

.240

(6.10)

Ø .150 PCD

(Ø 3.80 PCD)

.050

(1.30)

.256

(6.50)

.475

(12.10)

.240

.690

(17.50)

(6.10)

All Dimensions are for reference only

(Dimensions in brackets are in mm)

390-0122-01

2 Hole Panel Mount Receptacle Gasket

.044

.042

(1.05)

(1.10)

All Dimensions are for reference only

(Dimensions in brackets are in mm)

Used on PPS-02T and PPS-02A

- 6 -

Table of Styles - Receptacles

Cut Out Details

Ø .123

Ø .121

(Ø 3.15)

(Ø 3.05)

Ø .361 ± .002

HOLE DIAMETER

(9.17MM +/- .051MM

Ø .425

(Ø 10.80)

.095 MIN / .118 MAX

PANEL THICKNESS

.335 ± .002 A/F

(2.4mm MIN / 3mm MAX)

PANEL CUT OUT ACROSS FLATS

(8.51mm +/- .051mm)

.515 CENTRES

(13.05 CENTRES)

All Dimensions are for reference only

(Dimensions in brackets are in mm)

390-5013

Receptacle Dust Cap – Colour Black

.425

(10.8)

.220

5.6mm

.250

(6.4)

All Dimensions are for reference only

(Dimensions in brackets are in mm)

PPS-6XXX-XXX

Jam Nut Receptacle to Header Assembly

LENGTH XX

SEE TABLE 1

MATING HALF

CONNECTOR

RS-311-6546

VARIANT

.025

LENGTH XXX

25MM

.050

50MM

.075

75MM

.100

100MM

125MM

150MM

.125

.150

Panel Nut - Torque to 2.25Nm =1.65 foot pounds force

Please contact Amphenol Ltd for full part numbering information

This is available with the following PPS Receptacle styles and in all Inserts: PPS-07A, PPS-01T, PPS-02A

- 7 -

Table of Styles - Plugs

PPS-06T05-XXPX-XXX

Non Grounded Plug complete with

Backshell and optional Crimp

Ferrule

1.24

Ø .452

(11.50)

.775

(19.75)

.314 A/F

(8.00 A/F)

TABLE 1

PART NUMBER

MAX. CABLE DIAMETER FOR FERRULE

PPS-06T05-XXPX-001

PPS-06T05-XXPX-002

PPS-06T05-XXPX-003

6.5MM

4.3MM

3.2MM

STRAIGHT FERRULE .001

(SEE TABLE 1 FOR SIZES)

TAPERED FERRULE .002

(SEE TABLE 1 FOR SIZES)

All Dimensions are for reference only

(Dimensions in brackets are in mm)

Torque backshells 15 inch lbs

Ferrule

Max. Cable Diameter

Options for Black Zinc Cobalt Plated

001

002

003

Parallel Ferrule

Taper Ferrule

5.6mm O.D.

4.3mm O.D.

3.2mm O.D.

For Crimp Tool details, please refer to the back of this catalogue.

390-5012

Plug Dust Cap – Colour Black

.080

(2.0)

.220

(5.6)

.413

10.6mm

All Dimensions are for reference only

(Dimensions in brackets are in mm)

- 8 -

PPS Heatshrink Boots

For use with PPS-06T and PPS-06TG Plugs and PPS-01T In Line Receptacles

We have selected Heatshrink Boots from Hellermann Tyton. Heatshrink Boots from other manufacturers may

be used if appropriate.

100 Series – Bottle Shapes with Rib – MIL Style

This style is used in conjunction with the

backshell (see page 8), providing strain

relief and environmental sealing

Dimensions apply to all materials unless otherwise

indicated and dimensions in brackets are in mm

Fully recovered form (after heating)

Expanded (Min)

Recovered (Max)

Recovered Dimensions Fully Shrunk

Hellermann

Part No

±10%

-H

JØ

-H matl

±10%

matl

0.3976

(10.7)

0.3976

(10.7)

0.1811

(4.6)

0.1811

(4.6)

0.3110

(7.9)

(0.0787)

(2.0)

1.0

(25.4)

0.5709

(14.5)

0.1811

(4.6)

0.0512

(1.3)

0.0512

(1.3)

0.0394

(1.0)

113-4-G-WM250

1100 Series – Right Angle Shapes with Rib – MIL Style

The style provides strain relief for harness

systems when used in conjunction with

the backshell (see page 8)

Dimensions apply to all materials unless otherwise indicated

and dimensions in brackets are in mm

Fully recovered form (after heating)

Expanded (Min)

Recovered (Max)

Recovered Dimensions Fully Shrunk

Hellermann

Part No

JØ

±10%

0.6875

(17.3)

±10%

0.7969

(20.1)

±10%

0.6005

(15.2)

±10%

0.1614

(4.1)

±20%

0.0394

(1.0)

±20%

0.0394

(1.0)

0.6496

(16.5)

0.6496

(16.5)

0.3110

(7.9)

0.1496

(3.8)

1108-4-G-WM250

- 9 -

PPS Cable Assemblies

Amphenol Ltd can supply complete overmoulded cable harness solutions to your specifications. Detailed

below are some examples of what would be available on request. The following templates are of common

harness configurations – please consult factory for cable number allocation

UP TO 7 WAY SINGLE ENDED CABLE ASSEMBLY

XXX METRES

1.705 REF

.930 REF

LOCATOR RIB

END OF CABLE

TO BE

CUT FLUSH

NOTES:

1. THE MAIN KEY OF THE CONNECTOR IS TO BE IN LINE WITH THE LOCATION RIB

ON THE OVERMOULD.

2. ALL DIMENSIONS ARE FOR REFERENCE ONLY.

3. XXX PART NUMBER DENOTES CABLE LENGTH IN METRES

PPS - 5XXX - XXX

CONNECTOR SERIES

CABLE LENGTH

TECHNICAL DESCRIPTION –

CONSULT PRODUCT SUPPORT

PPS@AMPHENOL.CO.UK

All Dimensions are for reference only

(Dimensions in brackets are in mm)

UP TO 7 WAY DOUBLE ENDED CABLE ASSEMBLY

XXX METRES

1.705 REF

.930 REF

LOCATOR RIB

NOTES:

1. THE MAIN KEY OF THE CONNECTOR IS TO BE IN LINE WITH THE LOCATION RIB

ON THE OVERMOULD.

2. ALL DIMENSIONS ARE FOR REFERENCE ONLY.

3. XXX PART NUMBER DENOTES CABLE LENGTH IN METRES

PPS - 5XXX - XXX

CONNECTOR SERIES

CABLE LENGTH

TECHNICAL DESCRIPTION

CONSULT PRODUCT SUPPORT

PPS@AMPHENOL.CO.UK

All Dimensions are for reference only

(Dimensions in brackets are in mm)

- 10 -

PPS Cable Assemblies

UP TO 7 WAY COILED SINGLE ENDED CABLE ASSEMBLY

XXX METRES

MIN 90MM REF

1.705 REF

.930REF

LOCATOR RIB

END OF CABLE TO BE

CUT FLUSH

NOTES:

1. THE MAIN KEY OF THE CONNECTOR IS TO BE IN LINE WITH THE LOCATION RIB

ON THE OVERMOULD

2. ALL DIMENSIONS ARE FOR REFERENCE ONLY

3. XXX IN PART NUMBER DENOTES CABLE LENGTH IN METRES

PPS - 5XXX - XXX

CONNECTOR SERIES

CABLE LENGTH

TECHNICAL DESCRIPTION

CONSULT PRODUCT SUPPORT

PPS@AMPHENOL.CO.UK

All Dimensions are for reference only

(Dimensions in brackets are in mm)

UP TO 7 WAY COILED DOUBLE ENDED CABLE ASSEMBLY

XXX METRES

MIN 90MM REF

1.705REF

.930 REF

LOCATOR RIB

NOTES:

1. THE MAIN KEY OF THE CONNECTOR IS TO BE IN LINE WITH THE LOCATION RIB

ON THE OVERMOULD

2. ALL DIMENSIONS ARE FOR REFERENCE ONLY

3. XXX IN PART NUMBER DENOTES CABLE LENGTH IN METRES

PPS - 5XXX - XXX

CONNECTOR SERIES

CABLE LENGTH

TECHNICAL DESCRIPTION

CONSULT PRODUCT SUPPORT

PPS@AMPHENOL.CO.UK

All Dimensions are for reference only

(Dimensions in brackets are in mm)

Any Cable Assembly Part Number will be issued at quotation or order placement stage by Amphenol Ltd only. For more details

please consult the factory.

- 11 -

PPS Connector Part Numbers

PPS - XX X 05 - XX X X - XXX (970)

Series

Plating Finish

Receptacle Only:

(970) - Black Silver Body and Black

Silver Panel Nut

(416) - Electroless Nickel Body

and Panel Nut

Plugs Only:

Style

(976) – Black Silver Body with

Electroless Nickel Coupling

Nut

06 – Plug, Threaded Shell only

07 – Jam Nut Receptacle

(Plain Shell only)

01 – In Line Receptacle

(Threaded Shell only)

02 – Two Hole Panel Mount Receptacle

Plug Cable Variant

001 – 6.3mm Parallel Ferrule

002 – 4.3mm Taper Ferrule

003 – 3.2mm Taper Ferrule

Receptacle Contact Style

001 – PCB Contacts

Mounting

T – Shell with Accessory Thread

Plug Shells Ungrounded

002 – Solder Bucket Contacts

TG – Shell with accessory Thread and

Grounding Spring for Plug only

A – Plain Shell Receptacle only

Keyway Orientation

Shell Size

05 only

Contact Type

P – Pin in Plugs only

S – Socket in Receptacle only

Number of Contacts

05 – 5 Contacts

06 – 6 Contacts

07 – 7 Contacts

STANDARD PLATING

Plugs

Omit Deviation – Black Silver Plated Body and Backshell with Black Coupling Nut

- 12 -

PPS – Crimp Tool

For Braid Termination Style 003

Crimp the Braid into place so that the ferrule butts up against the shoulder of the backshell. Use crimp tool

Daniels HX4 M22520/5-01 handle, crimp die set Daniels Y530 CAGE 11851 at setting 180.

Notice: Products are sold subject to Amphenol’s Standard Conditions of Sale. All specifications and statements contained

herein are believed to be correct at the time of printing but no representation or warranty, express or implied, is given as to any

specification or statement contained herein. Product specifications including performance characteristics are typical only and

subject to deviation. Specifications are also subject to change without notice. Users should not assume that all safety

measures are indicated or that other measures may not be required. No representation or warranty, express or implied, is given

that any use of products (including any stated or suggested use) does not infringe any patent, registered design or other third

party rights and no stated or suggested use of products can be taken to recommend any such infringement.

Amphenol

Thanet Way, Whitstable, Kent. CT5 3JF Tel: 01227 773200 Fax: 01227 276571

- 13 -

PPS-06TG05-06PA-003(976) [AMPHENOL]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E