PST360G2-B2AA-C0003-ERA015-REK [AMPHENOL]
Hall Effect Sensor, Board Mount,;
| 型号： | PST360G2-B2AA-C0003-ERA015-REK |
| 厂家： | 
Amphenol |
| 描述： | Hall Effect Sensor, Board Mount, 输出元件 传感器 换能器 |
| 文件： | 总5页 (文件大小：1329K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Mechatronics
Electromechanical
Sensors
Controls
Magnetic rotary hollow-shaft position sensor/control
Contactless sensor
PST-360
Key features
• Simple and robust magnetic design.
• High resolution (up to 14-bit).
• Ratiometric analog or PWM.
• Absolute position feedback up to
360º (keeps position on power loss).
• True full redundant version.
• Sealed construction for harsh
environments such as off-highway
and marine.
• Protected from dust, moisture,
vibration and extreme temperatures.
• Endless rotation.
• Fully programmable transfer
function output at the factory with
electrical outputs up to 360º.
• Self-diagnostic features.
• Over voltage protection and
reverse voltage protection.
• Extended voltage input supply
values.
The PST-360 through hole / hollow-shaft position sensors combine three critical design features; 1) through hole where the
shaft passes through the sensor, 2) high accuracy absolute position feedback over up to 360 degrees, and 3) a true non-contacting
sensing element. Piher’s design does not rely on gears or other rotating parts.
This innovative and unique patented design features the following advantages:
- Compliments the attributes of the target application.
- Mechanical integrity that matches customer’s application by design.
- Unique shaft mounted design that mounts at the pivot point of the application.
- No levers, connecting rods or mechanical interfaces needed.
Also upon request:
• Programmable switch output.
• CAN and SPI output.
- Adapts to shaft’s eccentricity, mounting tolerances and mechanical wear over the life of the application.
Industries served
• Automotive and On-highway (road
vehicles, trucks, recreational
vehicles, road sweepers).
• Off-highway (agriculture,
construction and forestry,
motorsport, airport operations).
• Material handling.
Mechanical specifications
Rotational life
up to 50.000.000 cycles.
-40ºC to +125ºC.
(depends on application and mounting)
Operating temperature
1
• Marine engines.
• Medical.
Electrical specifications
• Industrial.
Linearity
1
±1% absolute (0.5% upon request).
Applications
Programmable from 15 to 360 degrees.
Angular range
Output 2
• Non-contacting long life
angle / position sensor.
• Absolute rotary position sensor.
• Pedal position sensor.
• Throttle / EGR valve and gear
position sensor.
• Height and suspension sensor.
• Motor-shaft position sensor.
• Pivot point angle sensing.
• Off road / highway steering.
• Agricultural machinery hydraulic
lift arms, scoops, articulation/joints.
• Forklifts / material handling.
• Industrial pumps.
Analog (Ratiometric), PWM.
Serial protocol and CAN SAE J1939 upon request.
Switch output
Upon request. Programmable.
Angular Resolution
(depends on electrical angle and rotational speed)
Analog & PWM: up to 12 bits.
Serial Protocol (SPI): up to 14 bits.
Supply voltage
Supply current
1
Up to 25V.
Typ 8.5mA for single version.
Typ 17mA for redundant version.
:
• Accelerator / Steering / Shifter
position sensor for marine outboard
engine.
• Precision robotics, industrial
equipment, HVACR monitoring &
control, etc.
Piher Sensing Systems
Our product competencies and services:
Potentiometers | Position / angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
-Page 1 of 5-
Mechatronics
Electromechanical
Sensors
Controls
Magnetic rotary hollow-shaft position sensor/control
Contactless sensor
PST-360
How to order (example: PST360-1A-C0018-ERA190-05K)
Simple output
PST360G2
1
K
05
RE
(see note 3)
Redundant output
PST360G2
K
2
05
RE
(see note 3)
Full redundant output
PST360G2
05
K
3
3 = full redundant
05
(see note 3)
(1) Other rotors: check availability.
(2) The analog output is a ratiometric output, proportional to:
- For supply voltage 5V: to input supply voltage.
- For supply voltage RE: to 5V.
(3) 05: 5V ±10%
RE: 7V - 25V
(4) Other output functions available check availability.In the How To Order reference, enter CXXXX meanwhile the new output function reference is not defined.
E.g.:PST360-1A-CXXXX-ERA190-05K
(5) Leave empty if no applicable. Default frequency is 200 Hz
Piher Sensing Systems
Our product competencies and services:
Potentiometers | Position / angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
-Page 2 of 5-
Mechatronics
Electromechanical
Sensors
Controls
Magnetic rotary hollow-shaft position sensor/control
Contactless sensor
PST-360
Dimensions
Hollow shaft diameter 14mm.
Recommended
shaft dimensions.
D
13,85
± 0,02
50
12
CW
Metal Insert
Metal Insert
A
62,0
38
Rotor - Detail A
n
r
Piher Sensing Systems
Our product competencies and services:
Potentiometers | Position / angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
-Page 3 of 5-
Mechatronics
Electromechanical
Sensors
Controls
Magnetic rotary hollow-shaft position sensor/control
Contactless sensor
PST-360
Dimensions
Hollow shaft diameter 17mm.
Recommended
shaft dimensions.
± 0,02
50
12
CW
Metal Insert
Metal Insert
A
62,0
38
e
R
Rotor - Detail A
n
n
N
N
F
H
d
m
t
d
p
Mounting instructions
1.- Place the component on a flat surface.
e
e
2.- Fit the shaft of the application (see recommended shaft dimensions) through the sensor's rotor avoiding any mechanical play/wobble.
3.- Fasten the two M5 screws (M5 washers are recommended).
d
s,
Piher Sensing Systems
Our product competencies and services:
Potentiometers | Position / angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
-Page 4 of 5-
Mechatronics
Electromechanical
Sensors
Controls
Magnetic rotary hollow-shaft position sensor/control
Contactless sensor
PST-360
Connections scheme
O
N
C
Simple analog output connection wiring scheme. Other versions available upon request.
Brown = Power supply.
Blue = Ground.
Black = Signal output.
White = Not used.
Grey = Not used.
Fly leads with Wire: 0.35mm². TXL SAE J1128.
Check availabiity for the connector options.
Output examples
Disclaimer
Ferromagnetic parts close to the sensor, including the shaft, may modify the performance of the sensor. Therefore, this has to be communicated
to Piher for prior analysis.
Contact
No external magnetic perturbations are considered on the application where the sensor is mounted. If so, amplitude and direction of flux density
generator type and characteristics (magnet, cable, motor...) must be notified to Piher.
Piher Sensors & Controls SA
The product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate design information.
Polígono Industrial Municipal
Vial T2 Nº22
31500 Tudela - Spain
Tel: +34-948-820450
Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Piher”), disclaim
any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described
herein.
Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein
to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Piher’s terms and conditions of sale,
including but not limited to the warranty expressed therein, which apply to these products.
sales@piher.net
www.piher.net
No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of
Piher.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated.
Customers using or selling Piher products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully
indemnify Piher for any damages arising or resulting from such use or sale. Please contact authorised Piher personnel to obtain written terms
and conditions regarding products designed for such applications.
C
a
el
Product names and markings noted herein may be trademarks of their respective owners.
3
e
e
Information contained in and/or attached to this catalogue may be subject to export control regulations of the European Community, USA, or
other countries. Each recipient of this document is responsible to ensure that usage and/or transfer of any information contained in this document
complies with all relevant export control regulations. If you are in any doubt about the export control restrictions that apply to this information,
please contact the sender immediately. For any Piher Exports, Note: All products / technologies are EAR99 Classified commodities. Exports from
the United States are in accordance with the Export Administration Regulations. Diversion contrary to US law is prohibited.
11
a
e
Piher is an AmphenolTM company.
/EC
/
/
0
o
0
H
S
2
Pb
o
c
)
All Piher products can be adapted to meet customer´s requirements.
Due to continuous process improvement, specifications are subject to change without notice.
Please always use the datasheets published at our website www.piher.net for the most up-to-date information.
v290818
Piher Sensing Systems
Our product competencies and services:
Potentiometers | Position / angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
-Page 5 of 5-
相关型号：
©2020 ICPDF网 联系我们和版权申明