PT00A-12-10P(SR)_技术文档

Table of Contents

Introduction, Amphenol^®Miniature Cylindrical

Page No.

Proprietary/MIL-C-26482 Series 1 connectors

covered in this catalog are widely used in gen-

eral duty and environmental applications,

both industrial and military.

General Information, Design Flexibility . . . . . . . . . . . . . . . . . . .1, 2

Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5

Insert availability Breakaway Twist Pull. . . . . . . . . . . . . . . . . . . . . . . 6

Alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Insert arrangement patterns . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

PT, SP, MS/PT Proprietary/MIL-C-26482, Series 1 Bayonet Coupling,

Solder Contacts

Markets that use this family of connectors include:

• Instrumentation

• Monitoring Equipment

• Machine Tool, Factory Automation

• Communications

General Information, Specifications, Service Class . . . . . . . . . . . 12, 13

PT00 (MS3110), SP00 wall mounting receptacle . . . . . . . . . . . . . . 14

PT01 (MS3111) cable connecting receptacle . . . . . . . . . . . . . . . . 15

PT02 (MS3112) SP02 box mounting receptacle . . . . . . . . . . . . . . 16

PT06 (MS3116) SP06 straight plug . . . . . . . . . . . . . . . . . . . . . 17

PT07 (MS3114) SP07 jam nut receptacle. . . . . . . . . . . . . . . . . . 18

PT08E, SP08E 90 degree plug . . . . . . . . . . . . . . . . . . . . . . . 19

PT Connectors with Printed Circuit Board Contacts -

• Geophysical

• Industrial Controls and Robotics

• Oil and Petrochemical Industries

• Rail/Mass Transit

• Military/Aerospace

If more information is needed concerning the con-

nectors covered in this publication, or if there are

special application needs, please contact:

box mount receptacle, jam nut receptacle. . . . . . . . . . . . . . . . . . 20

PTB, SPB thru bulkhead receptacle. . . . . . . . . . . . . . . . . . . . . 21

General Information, Specifications - PT hermetic . . . . . . . . . . . . . 22

PTIH (MS3113H) hermetic solder mounting receptacle. . . . . . . . . . . 23

PT02H hermetic box mounting receptacle . . . . . . . . . . . . . . . . . 24

PT07H (MS3114H) hermetic jam nut receptacle . . . . . . . . . . . . . . 25

PT Breakaway twist pull plug . . . . . . . . . . . . . . . . . . . . . . . . 26

PT, SP, MS/PT how to order . . . . . . . . . . . . . . . . . . . . . . . . 27

PT-SE, SP-SE, MS/PT-SE Proprietary/MIL-C-26482, Series 1 Bayonet Coupling,

Crimp Contacts

General Information, Specifications, Service Class . . . . . . . . . . . 28, 29

PT00SE (MS3120), SP00SE wall mounting receptacle . . . . . . . . . . . 30

MF00SE (MS3128) wall mounting receptacle . . . . . . . . . . . . . . . . 31

PT01SE (MS3121) SP01SE cable connecting receptacle . . . . . . . . . 32

PT02SE (MS3122) SP02SE box mounting receptacle . . . . . . . . . . . 33

MF02SE (MS3127) box mounting receptacle . . . . . . . . . . . . . . . . 34

PT06SE (MS3126), SP06SE straight plug . . . . . . . . . . . . . . . . . 35

PT07SE (MS3124) SP07SE jam nut receptacle . . . . . . . . . . . . . . 36

PT08SE, SP08SE 90 degree plug . . . . . . . . . . . . . . . . . . . . . 37

PT-SE Breakway twist pull plug . . . . . . . . . . . . . . . . . . . . . . . 38

PT-SE, SP-SE, MS/PT-SE how to order . . . . . . . . . . . . . . . . . . 39

PT-CE, SP-CE Bayonet Coupling, Crimp Contacts

General Information, Specifications, Service Class . . . . . . . . . . . 40, 41

PT00CE, SP00CE wall mounting receptacle . . . . . . . . . . . . . . . . 42

PT01CE, cable connecting receptacle . . . . . . . . . . . . . . . . . . . 43

PT02CE, SP02CE box mounting receptacle . . . . . . . . . . . . . . . . 44

PT06CE, SP06CE straight plug . . . . . . . . . . . . . . . . . . . . . . . 45

PT07CE, SP07CE jam nut receptacle. . . . . . . . . . . . . . . . . . . . 46

PT08CE, SP08CE 90 degree plug . . . . . . . . . . . . . . . . . . . . . 47

PT-CE Breakawat twist pull plug . . . . . . . . . . . . . . . . . . . . . . 48

PT-CE, SP-CE how to order. . . . . . . . . . . . . . . . . . . . . . . . . 49

PC Threaded Coupling, Solder Contacts

Amphenol Corporation

Amphenol Aerospace

Amphenol Industrial Operations

40-60 Delaware Avenue

Sidney, New York 13838-1395

Telephone: 607-563-5011

Fax: 607-563-5351

Please go to the Amphenol websites to view,

download and save this catalog and most all of

Amphenol interconnection product literature.

www.amphenol-industrial.com

www.amphenol-aerospace.com

Some miniature connector styles

h

are available in RoHS Compliant

versions. Please contact Amphenol

Industrial Operations for more

information.

2

Amphenol operates Quality Systems that are cer-

tified to ISO9001: 2000 by third party registrars.

General Information, Specifications, Service Class . . . . . . . . . . . 50, 51

PC00 wall mounting receptacle . . . . . . . . . . . . . . . . . . . . . . . 52

PC01 cable connecting receptacle . . . . . . . . . . . . . . . . . . . . . 53

PC02 box mounting receptacle . . . . . . . . . . . . . . . . . . . . . . . 54

PC06 straight plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

PC07 jam nut receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . 56

General Information, Specifications - PC hermetic . . . . . . . . . . . . . 57

PCIH hermetic solder mounting receptacle . . . . . . . . . . . . . . . . . 58

PC02H hermetic box mounting receptacle . . . . . . . . . . . . . . . . . 59

PC07H hermetic jam nut receptacle. . . . . . . . . . . . . . . . . . . . . 60

PC how to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

PC-SE, PC-CE Threaded Coupling, Crimp Contacts

General Information, Specifications, Service Class . . . . . . . . . . . . . 62

PC-SE, PC-CE how to order . . . . . . . . . . . . . . . . . . . . . . . . 63

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-68

Application tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Contacts, Power and Thermocouple Crimp. . . . . . . . . . . . . . . . . . . . 70

Contacts, Shielded Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . 71-76

Mounting Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Other Amphenol Miniature Cylindrical Connectors . . . . . . . . . . . . . . 78, 79

Amphenol Sales Office and Authorized Distributor Listing . . . . . . . . . . . . 80

NOTE:

The connector products in this brochure were formerly

known as Bendix^®products. These products are now

manufactured and sold under the Amphenol^®brand

name. The name “Amphenol” will replace the name

“Bendix” on products and literature in the future.

NOTE:

The Miniature MIL-C-26482, Series 2 connectors PTS-

DR and MS/PTS-DR (formerly in this catalog) are no

longer supplied with these designations. Amphenol now

®

supplies the Amphenol /Matrix MIL-C-26482, Series

2. (Military numbers include MS3470 - MS3472,

MS3474, - MS3476).

Please refer to page 78 for a brief description of the

®

Amphenol /Matrix MIL-C-26482, Series 2 bayonet

coupling connectors with crimp, rear insertable and rear

releasable contacts, and ask for catalog 12-071 for

detailed information on this series.

®

Amphe nol Miniature Cylindrica l Conne ctors

Proprietary/MIL-C-26482, Series 1

Amphenol^®Miniature Cylindrical connectors offer twice the number of contacts in just half the size of a Standard connector. These

miniature connectors, are available in several series, each with varying design characteristics and customer options to meet cost con-

siderations and provide maximum design flexibility. There are two styles within the family that are MS approved and qualified to MIL-

C-26482, Series 1, and in addition there are several proprietary styles.

Common features of all styles:

• All are for general duty applications and environmental sealing is achieved with the grommet and clamp design.

• Operating temperature is from –55°C to +125°; Operating voltage to 1000 VAC (RMS) at sea level.

• Pin and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and provide an

indefinite shelf life.

• All have resilient inserts which provide high dielectric strength and moisture barrier.

• A variety of shell finishes (including non-cadmium) and a variety of backend accessories are available within the styles.

Bayonet Coupling with Solder Contact Termination

PT, MS/PT (solder)

• MS and proprietary versions

Options

• 7 shell styles with 60 insert patterns

• Hermetic seal (glass fusion) recepta-

cle styles available

• Pressurized thru bulkhead recepta-

cle style available

• Factory installed solder contacts

• 3 point bayonet coupling and 5 key/keyway mating.

• Intermateable with all miniature series connectors except threaded

PC series.

PT Solder

jam nut receptacle and

mated straight plug

• MS/PT meets MIL-C-26482 Series 1, service classes E, F and P.

• MS/PT is UL recognized.

SP (solder)

• SP Series is a modification of the PT with same features except a

wider flange for back panel mounting

• Breakaway quick disconnect styles

• EMI filter protection styles

• Pre-installed coax solder contacts

are available

• Printed circuit board contacts are

available

Bayonet Coupling with Crimp Contact Termination

PT-SE, MS/PT-SE (crimp)

Options

• MS and proprietary versions

• Crimp rear insertable/front release contact termination. (closed entry

socket insert prevents probe damage).

• 6 shell styles with 47 insert patterns

• Breakaway quick disconnect style

available

PT Solder

wall mount receptacle

• 3 point bayonet coupling and 5 key/keyway mating.

• Intermateable with all miniature series connectors except threaded

PC series.

• Coax and thermocouple contacts are

available

• MS/PT-SE meets MIL-C-26482 Series 1, service classes E, F, P.

SP-SE (crimp)

• Modification of the PT-SE with wider flange for back panel mounting

PT-CE, SP-CE (crimp)

• Incorporates a special one-piece insert and grommet assembly

PT-SE Crimp

Threaded Coupling with Solder Contact Termination

wall mount receptacle

and mated straight plug

PC (solder) Proprietary

Options

• Double stub threaded coupling and single hole polarization.

• Factory installed solder contacts

• 5 shell styles with 60 insert patterns

• Hermetic receptacles available

• Pressurized thru bulkhead recepta-

cle style available

• Pre-installed coax solder contacts

are available.

Threaded Coupling with Crimp Contact Termination

Two threaded PC styles are offered in some shell sizes. Both have

crimp front release and front removable contacts, but they have differ-

ent retention systems.

PC-SE (crimp) Proprietary - with spring tower retention system

• Spring tower retention system

Options

• 5 shell styles (consult Amphenol for

availability of shell sizes and insert

patterns)

PC Threaded Crimp

straight plug and wall

mount receptacle

PC-CE (crimp) Proprietary - with nylon wafer dielectric system

1

®

Amphe nol Miniature Cylindrica l

design flexibility

The large family of miniature proprietary and MS style connectors provides for

many optional features and designs. In addition to the choices of bayonet or

threaded shells, solder or crimp termination within the style variations, there are

additional options that are shown here.

Hermetics

Hermetically sealed receptacles have fused compression glass sealed

inserts which provide envionrmental moisture sealing. There are three

hermetic styles within the PT bayonet series and three hermetic styles

within the PC threaded series.

Coaxial Contacts

Amphenol Miniature connectors can incorporate shielded coax

contacts. Size 8 and 12 crimp coax contacts are available in PT-SE,

SP-SE, MS/PT-SE. Factory installed size 8 and 12 solder type coax

contacts are available in PT, SP,MS/PT connectors. See coax contact

information pages at the end of this catalog.

26482 Connector with Hermetic 26482 Connector with PC Tail

Seal Insert and Coax Contacts

Contacts

Printed Circuit Board Tail Contacts

PT bayonet connectors in box mounting receptacle and jam nut receptacle styles are avail-

able with printed circuit board contacts. Standard PCB tails for MIL-C-26482 connectors

have gold plating, .0050 inches over nickel. See page 20 and call Amphenol for further infor-

mation.

Flex Circuitry

Flex termination assemblies for attaching cylindrical connectors to printed circuit boards are

available through the Amphenol division ACT, Advanced Circuit Technology. Flex can be

used with miniature 26482 connectors and it can be designed to meet specific length, current

carrying capacity and to fit the precise geometric shape of the connector to board package.

Flex circuity plugs into a printed circuit board and creates a self-locking terminal pad which

eliminates the need for an additional interconnect to the PCB.

26482 Connector with Flex

Breakaway, Twist Pull Miniatures

Quick disconnect “breakaway” styles are shown in this catalogs. These are available in PT

solder style plugs (page 26), PT-SE crimp style plugs (page 38) or PT-CE crimp style plugs

(page 48). Quick disconnect of the connector plug from the receptacle is accomplished with

axial pull on the lanyard. This instant decoupling and damage free separation is ideal for

weapons release and blind or difficult accessibility situations. Separation forces vary per

connector series. The plug and receptacle need to be fully mated before disengagement by

the lanyard pull.

Breakaway Twist Pull 26482

Filter Protection

Amphenol offers the FPT Series which combines the miniature PT

series with an EMI filter. Designed to provide EMI protection for

sensitive circuits, each circuit is individually filtered within the con-

nector, eliminating the need for costly and bulky exterior network

filters. Filter contacts are available in MF, HF, VHF, and UHF

ranges and are intermateable and intermountable with MIL-C-

26482 connectors. For further information see catalog 12-120,

Amphenol EMI Filter Transient Protection Connectors. (online at

www.amphenol-aerospace.com).

26482 Connector with EMI

Filter Protection

26482 Connector with Overmolded

Cable

Overmolded Cable

Overmold seals and cables can be designed for almost any industrial application. A variety

of materials are available: neoprene, hypalon and others; and a variety of lengths can be

designed to meet customer specifications. Overmold seals to the rear of the connector and

to the cable jacket providing moisture sealing.

2

®

Amphe nol Miniature Cylindrica l

connector selection guide

The accompanying chart is provided to assist the user in selecting

the appropriate type of miniature connector to meet the application

requirements. Further information can be found in specific sections

of this catalog.

Solder

Crimp

MS/

PT-SE PT-SE SP-SE PC-SE PT-CE SP-CE PC-CE

CHARACTERISTICS

Intermateable†

Contacts

PT

MS/PT

SP

PC

o

X

o

X

o

X

Solder

•

Crimp RI/FR

•

Contact Retention

System

Non-Removable

•

Removable

•

Coupling

Bayonet

Threaded

•

Standard Finishes††

Olive Drab Cadmium (003)

Anodic Coated (005)

Bright Cadmium (001)

Resilient Dielectric (–55°C to +125°C)

•

Temperature Range

Wide Mounting Flange

Hermetic Seal

•

SHELL STYLE AVAILABILITY

Wall Mounting Receptacle “00”

Cable Connecting Receptacle “01” ***

Box Mounting Receptacle “02”

Straight Plug “06”

•

**•

•

*•

•

*•

•

**•

•

Jam Nut Receptacle “07”

Thru-bulkhead Receptacle “TB”

Solder Mount Receptacle “I”

90° Plug “08”

*•

•

*•

•

*•

•

*•

•

RI/FR = Rear Insertion/Front Releasable

†

o intermates with o

X intermates with X

†† Optional finishes available. See “how to order” sections.

Available in hermetic version

** Dual mounting holes

*

*** This connector style is sometimes referred to as a cable connecting “plug.”

It does, however, mate with either a straight or 90 degree plug.

Amphenol^®/Matrix^®MIL-C-26482, Series 2 bayonet coupling connectors with rear insertable and rear releaseable

contacts are covered in another catalog - See pageXX for a brief description and see complete details in catalog 12-071

which is online at www.amphenol-aerospace.com.

3

®

Amphe nol Miniature Cylindrica l

insert availability

Solder Termination

Crimp Termination

Hermetic MS/PT-SE

Contact Size

Coax

PT

MS-PT

PC

PT-SE

SP-SE

PC-SE

PT-CE

SP-CE

PC-CE

Insert

Arrangement MS/PT

Total

Contacts

Service

Rating

PT

X

S

X

SP

X

S

X

PC

X

S

X

20

1

16

12

8

6-1

X*

X

1

2

I

8-2

X

2

I

8-3

X

3

I

8-4

X

4

I

8-33

8-98

X

3

I

3

I

10-2

2

I

10-5

X*

X

5

6

I

10-6

X

6

I

10-70

10-98

12-3

1

Coax

X

X*

X

6

I

3

4

II

12-4

X*

X

4

I

12-8

X

8

I

12-10

12-14

12-98

14-2

10

14

10

2

10

I

14

10

I

2

II

14-4

X

4

2

I

14-5

X

5

II

14-8

8

6

8

I

14-12

14-15

14-18

14-19

14-22

14-71

14-91 HV

14-AA

16-8

X

12

15

18

19

5

4

1

I

X

14

18

19

1

I

X*

X

I

X

I

X*

4

I

P

S

X

(02CE)

4

3

1

I

X*

3

**

X

4

I

X

8

1

II

16-23

16-26

16-70

16-76†††

16-99

18-5

23

26

15

14

23

5

22

26

14

8

I

X

I

1

5

N/A

X*

X

1

***

I

X

21

2

X*

5

8

II

I

18-8

8

18-11

18-30

X

11

30

11

II

I

X*

29

1

*Not available in MS version

**Flashover voltage 5,000 VAC (RMS)

***1500 VAC (RMS)

P designates Pin insert only.

†Size 12 contacts for #10 wire

††Not presently tooled

Sdesignates Socket insert only.

†††Contacts must be ordered separately

4

®

Amphe nol Miniature Cylindrica l

insert availability, cont.

Solder Termination

Crimp Termination

Hermetic MS/PT-SE

Contact Size

Coax

PT

MS-PT

PC

PT-SE

SP-SE

PC-SE

PT-CE

SP-CE

PC-CE

Insert

Arrangement MS/PT

Total

Contacts

Service

Rating

PT

SP

PC

20

32

16

12

8

18-32

18-71

18-72

18-75

18-76

18-80

18-91 HV

20-16

20-24

20-25

20-26

20-27

20-39

20-41

20-70

20-90 HV

22-7

X

32

9

I

X*

8

1

Coax, II

X

14

4

10

4

N/A

4

1

2

Coax

4

3

II

X

8

6

Coax, I

X*

X

6

**

X

16

24

25

26

27

39

41

14

7

16

II

24

25

20

27

37

41

10

7

I

6

I

X

I

X

2

I

4

Coax

X

Hi-Voltage

X*

X

7

Coax

22-21

22-25

22-32

22-34

22-36

22-41

22-55

22-70

22-71

22-72

22-78†††

22-96

24-31

24-51

24-61

24-71

24-79

X

21

25

32

34

36

41

55

19

9

21

25

II

X*

X

I

X

P

X

32

I

34

36

27

55

13

2

I

X

14

I

6

7

3

7

I, Coax

X

19

7

12

4

31

2

N/A

X*

Coax

7

7†

II

X

31

51

61

49

6

I

X*

X

47

61

45

1

4

I

X

2

5

N/A

Coax

*Not available in MS version

**Flashover voltage 5,000 VAC (RMS)

***1500 VAC (RMS)

†Size 12 contacts for #10 wire

††Not presently tooled

†††Contacts must be ordered separately

5

®

Amphe nol Miniature Bre a kaway Twis t Pull

insert availability

For further information regarding any additional

insert patterns available in Breakaway Miniature

connectors, please contact Amphenol Aerospace.

For availability of shielded coax contacts within

Breakaway Miniature connectors contact Amphe-

nol.The Breakaway style pages are: PT (solder)

breakaway plug is on page 26, the PT-SE (crimp)

breakaway plug is on page 38, and the PT-CE

(crimp) breakaway plug is on page 48.

Insert Availability - Breakway Twist Pull

Crimp

Solder

Termination

Contact Size

Service

Insert

Arrangement

Total

PT-CE

PT-SE

PT

X

Contacts

20

2

16

12

Rating

8-2

X

2

3

I

8-3

X

3

I

8-4

X

4

I

10-2

X

2

I

10-6

X

6

7

I

10-98

10-99

12-3

X

6

I

X

7

I

X

3

4

II

12-4

4

I

12-8

X

8

10

I

12-10

12-98

14-2

10

2

I

2

II

14-5

X

5

II

14-8

8

6

8

I

14-12

14-15

14-16

14-18

14-19

14-91

16-6

X

12

15

4

1

2

I

14

I

2

6

II

X

18

19

3

18

19

3*

I

H.V.

6

I

16-8

X

8

1

II

16-23

16-26

16-99

18-5

23

26

23

5

22

26

21

I

2

I

5

II

18-11

18-28

18-30

18-32

18-91

20-8

X

11

28

30

32

6

11

2

II

26

29

32

6*

I

X

1

I

H.V.

8

I

II

I

20-16

20-24

20-25

20-27

20-39

20-41

22-8

X

16

24

25

27

39

41

8

16

24

25

27

37

41

I

X

I

X

2

I

8

21

25

II

I

22-21

22-25

22-32

22-34

22-36

22-41

22-55

22-96

22-97

22-99

24-31

24-61

X

21

25

32

34

36

41

55

7

X

32

34

36

27

55

I

X

14

I

X

I

7†

II

I

X

16

11

31

61

16

11

31

X

61

I

* 5KV Voltage Rating

† Size 12 contact for #10 wire.

6

®

Amphe nol Miniature Cylindrica l

alternate positioning

Alternate Positioning

To avoid cross-plugging problems in applications requiring

the use of more than one miniature cylindrical connector of

the same size and arrangement, alternate insert rotations

are available as indicated in the accompanying chart.

Position W

Position X

Position Y

Position Z

As shown in the diagram at right, the front face of the pin

insert is rotated within the shell in a clockwise direction from

the normal shell key. The socket insert would be rotated

counterclockwise the same number of degrees in respect to

the normal shell key.

Views looking into front face of pin insert or rear of socket insert.

Insert Rotation

Degrees

Insert Rotation

Degrees

Shell

Size

Insert

Arrangement

Shell

Size

Insert

Arrangement

W

–

X

–

Y

–

Z

–

W

62

180

85

18

53

45

–

X

Y

Z

6

8

6-1

18

20

22

24

18-11*

18-30*

18-32*

18-71

18-72

18-75

18-76

18-80

18-91HV

20-16*

20-24

20-25

20-26

20-27

20-39*

20-41*

20-70

20-90

22-7

119

193

138

108

102

–

241

285

222

127

213

–

340

350

265

215

293

–

8-2*

58

60

45

90

–

122

210

97

–

8

8-3

–

8

8-4*

184

–

8

8-33*

8-98

–

8

–

10

12

14

16

18

10-2

45

90

–

90

151

–

315

180

–

10-5*

10-6*

10-70

10-98*

12-3*

12-4*

12-8

270

–

45

90

238

70

72

13

72

63

45

63

45

19

16

60

72

62

72

39

30

33

42

19

90

22

90

39

–

90

135

240

333

215

216

210

216

252

225

222

225

–

160

270

347

290

288

322

288

333

–

180

318

145

144

107

144

126

135

41

–

90

–

180

–

240

180

–

270

–

38

90

60

–

112

155

–

203

270

–

292

295

–

12-10*

12-14

12-98*

14-2

61

58

45

40

48

43

17

15

30

45

–

135

122

–

189

–

340

–

335

315

–

14-4*

14-5*

14-8

–

92

162

90

110

90

165

–

184

189

–

273

312

–

22-21*

22-25

22-32

22-34

22-36

22-41

22-55*

22-70

22-71

22-72

22-78

22-96*

24-31

24-51

24-61*

24-71

24-79

135

125

145

142

144

135

142

82

175

211

215

218

216

264

226

218

236

277

–

349

336

288

298

288

–

14-12*

14-15*

14-18*

14-19*

14-22

14-71

14-91HV

14-AA*

16-8*

16-23

16-26*

16-70

16-76

16-99*

18-5

155

180

315

–

234

270

–

314

312

270

339

–

60

–

191

200

41

45

54

158

60

41

–

152

270

–

180

–

331

–

41

–

275

216

–

338

286

–

225

171

180

131

–

255

313

270

205

–

122

–

324

281

–

66

55

180

156

97

–

223

263

–

340

315

–

18-8

* Available in Hermetic Class

7

®

Amphe nol Miniature Cylindrica l

insert arrangements

front face of pin inserts illustrated

D

C

A

B

A

C

A

C

B

A

B

Insert Arrangement

Service Rating

6-1

I

8-2

I

8-3

I

8-4

I

8-33

8-98

10-2

I

Number of Contacts

Contact Size

1

2

3

4

3

2

20

16

A

G

A

F

E

A

F

B

E

F

B

C

A

B

H

D

E

D

B

D

B

C

E

C

D

C

D

C

B

Insert Arrangement

Service Rating

10-5

10-6

10-70

Coax

1

10-98

12-3

II

12-4

12-8

I

Number of Contacts

Contact Size

5

6

3

4

8

20

8 Coax

20

16

20

A

E

B

A

E

C

H

B

A

H

F

B

D

A

F

H

G

B

C

E

B

E

D

C

A

B

G

K

J

C

L

D

M

G

C

K

J

K

D

C

J

R

F

D

F

D

N

E

P

Insert Arrangement

Service Rating

12-10

I

12-14

I

12-98

I

14-2

II

14-4

14-5

II

14-8

I

Number of Contacts

Contact Size

10

14

10

2

4

5

6

2

20

12

16

20 12

A

L

M

A

E

H

E

A

L

A

N

A

D

A

B

K

R

L

N

J

P

M

K

H

M

B

G

B

K

C

D

J

B

V

U

T

U

F

K

N

E

J

T

P

C

R

M

F

C

S

R

D

H

D

P

F

D

J

S

C

B

L

E

G

H

G

E

D

C

G

F

Insert Arrangement

Service Rating

14-12

I

14-15

I

14-18

I

14-19

I

14-22

I

14-71

I

14-91HV

Flashover

5,000 VAC (RMS)

Number of Contacts

Contact Size

8

4

14

1

18

19

1

4

3

1

3

20 16

20

20 12

16 8 Coax

20

For contact legend see page 61.

8

®

Amphe nol Miniature Cylindrica l

insert arrangements

front face of pin inserts illustrated

P

A

R

S

A

H

A

N

Y

B

A

R

P

A

T

B

R

H

P

M

C

F

N

G

B

S

U

B

a

U

G

b

D

C

Z

L

D

E

N

J

X

M

T

c

F

C

Z

V

F

D

C

B

K

L

K

M

W

Y

W

E

X

J

K

V

C

D

E

L

E

D

G

F

H

J

H

G

Insert Arrangement

Service Rating

14-AA

16-8

II

16-23

I

16-26

I

16-70

N/A

I

Number of Contacts

Contact Size

4

8

22

1

26

14

1

12

16

20 16

20

20 12 Coax

A

H

J

A

R

B

P

G

B

K

A

H

B

S

T

C

L

N

J

C

K

U

E

B

P

Y

Z

D

M

X

V

D

H

L

M

E

W

L

D

C

G

F

C

G

E

F

K

G

J

F

D

F

H

E

D

E

Insert Arrangement

Service Rating

16-76

16-99

I

18-5

18-8

18-11

II

Flashover

1.500 VAC (RMS)

II

5

I

Number of Contacts

Contact Size

8

1

5

21

2

8

11

20 12* 2 Coax*

20 16

12

16

*Contact Positions Optional

A

T

A

S

A

B

S

e

H

B

R

U

f

C

V

d

T

K

A

L

V

P

C

c

U

J

P

d

D

e

J

B

W

G

C

b

N

D

j

N

c

E

g

P

M

f

X

g

a

W

M

E

M

F

h

H

C

Y

b

X

Z

N

Y

L

F

G

L

G

D

a

Z

F

D

K

G

H

K

F

E

J

E

H

J

Insert Arrangement

Service Rating

18-30

I

18-32

I

18-71

II, Coax

18-72

N/A

Number of Contacts

Contact Size

29

1

32

8

1

10

4

20 16

20

16 8 Coax

20 12 Coax

A

C

A

F

H

B

D

B

D

C

A

G

C

E

B

F

D

C

E

Insert Arrangement

Service Rating

18-75

Coax

4

18-76

II

18-80

18-91 HV

Flashover

5,000 VAC (RMS)

I, Coax

Number of Contacts

Contact Size

3

1

6

2

6

8 Coax

12 Coax 8 Coax

20 8 Coax

20

9

®

Amphe nol Miniature Cylindrica l

insert arrangements

front face of pin inserts illustrated

A

L

A

N

R

U

A

B

L

A

M

X

V

K

P

X

S

B

T

B

C

M

S

C

W

N

D

B

K

H

R

D

S

a

c

Y

a

W

b

T

W

M

E

a

Y

C

J

V

P

E

b

J

Z

C

R

P

N

F

Z

X

J

Z

L

U

V

F

R

U

D

H

M

G

H

D

L

T

G

S

Y

E

K

G

E

K

H

J

F

Insert Arrangement

Service Rating

20-16

II

20-24

I

20-25

I

20-26

I

Number of Contacts

Contact Size

16

24

25

20

6

16

20

20 12

A

R

A

W

B

A

V

K

A

B

W

j

C

n

B

X

k

U

P

X

L

V

J

B

D

j

C

Y

a

S

C

a

T

k

i

U

N

i

Z

E

H

Z

b

D

s

m

Z

D

T

S

M

P

m

r

h

T

S

h

t

a

M

L

F

d

c

E

r

R

Y

U

G

g

b

g

b

q

n

d

F

p

q

e

P

R

F

H

C

f

c

f

c

X

V

G

N

K

G

D

P

W

d

e

L

N

J

H

G

M

N

F

E

K

J

M

K

L

H

Insert Arrangement

Service Rating

20-27

I

20-39

I

20-41

I

20-70

Coax

Number of Contacts

Contact Size

27

37

2

41

10

4

20

20 16

20

20 8 Coax

A

P

A

N

R

Z

N

B

M

B

F

B

P

X

Y

S

A

C

E

M

K

W

R

L

G

D

C

T

X

G

B

a

b

L

D

E

C

V

S

K

D

W

U

V

F

C

U

T

E

D

J

E

J

F

H

F

G

H

G

Insert Arrangement

Service Rating

20-90

22-7

Coax

7

22-21

II

22-25

I

Hi-Voltage

Number of Contacts

Contact Size

7

21

25

20

8 Coax

16

A

Z

A

T

Y

N

A

B

S

B

X

j

P

j

B

C

S

U

a

k

b

R

U

e

R

e

f

B

C

V

M

W

D

d

m

C

V

R

b

a

c

S

h

g

n

V

n

p

e

s

m

l

E

P

h

j

W

X

D

L

C

c

k

t

q

f

c

W

X

i

f

g

P

N

U

Z

d

l

T

D

F

N

r

E

d

L

K

D

b

e

T

g

f

h

d

j

E

G

Y

M

U

g

h

Z

k

F

S

c

Y

H

E

M

J

Y

a

F

X

V

F

b

Z

R

G

a

J

W

L

G

P

H

K

H

K

N

K

L

H

M

G

J

Insert Arrangement

Service Rating

22-32

I

22-34

I

22-36

I

22-41

I

Number of Contacts

Contact Size

32

34

36

27

20

14

16

20

10

®

Amphe nol Miniature Cylindrica l

insert arrangements

front face of pin inserts illustrated

A

V

p

U

A

B

T

A

N

A

V

F

H

J

S

C

n

M

B

W

K

B

m

F

B

X

AA

k

Y

Z

a

b

q

S

U

P

L

T

N

D

R

BB

J

C

U

S

L

J

C

E

z

y

G

r

CC

GG

FF

j

i

HH

EE

V

E

F

P

s

M

K

T

D

P

R

DD

N

t

x

u

H

D

R

G

h

w

v

c

g

M

d

G

E

C

H

F

f

e

L

H

J

K

D

Insert Arrangement

Service Rating

22-55

I

22-70

22-71

22-72

N/A

I, Coax

Number of Contacts

Contact Size

55

13

6

2

7

12

4

3

20

20 8 Coax

20

8 Coax

20 16 8 Coax

a

A

b

M

Z

A

B

c

A

Z

A

B

G

C

L

N

B

C

Y

P

Q

b

u

D

X

F

B

F

E

t

d

AA

Y

X

a

g

E

W

e

s

y

K

J

f

C

v

G

F

DD

BB

z

R

f

V

r

e

c

D

G

CC

g

U

W

H

d

S

q

w

x

h

H

V

T

p

T

E

C

U

E

i

J

n

S

j

G

F

m

k

K

R

D

L

D

P

M

N

Insert Arrangement

Service Rating

22-78

Coax

7

22-96

24-31

I

24-51

I

II

7

Number of Contacts

Contact Size

31

47

4

8 Coax

12 for

# 10 wire

16

20 12 Coax

A

a

Z

A

Z

B

d

b

a

B

Y

F

c

Y

C

t

b

C

s

c

v

u

X

D

w

t

z

D

HH

W

y

u

e

d

h

r

D

C

A

B

GG

FF

x

W

E

NN

JJ

AA

BB

E

s

f

q

e

V

U

PP

LL

y

V

F

MM

KK

r

F

g

p

f

EE

z

U

G

q

n

g

G

h

E

DD

AA

T

m

H

p

x

k

v

i

w

i

H

CC

m

BB

S

n

j

J

j

J

k

R

K

P

L

N

M

Insert Arrangement

Service Rating

24-61

I

24-71

N/A

2

24-79

Coax

Number of Contacts

Contact Size

61

45

20

2

1

5

20

16 8 Coax

20 8 Coax

Contact Legend

Contact Size

Symbol

20

16

12

HV

12 Coax

8 Coax

11

®

Amphe nol PT, SP, MS/PT

Proprietary/MIL-C-26482, Series 1

bayonet coupling and solder termination

Amphenol^®solder contact miniature cylindrical connectors

meet the most critical application needs. Design versatility

combined with high reliability performance makes these

series of Miniature Cylindrical Connectors ideal for environ-

mental sealing or pressurized applications.

wall mounting

receptacle

The MS/PT Series is qualified to MIL-C-26482, Series 1 and has

all the outstanding design characteristics and quality of the PT

Series. The SP Series is a modification of the PT, providing special

shells with a wide mounting flange for back panel mounting.

A corrosion resistant electrically conductive finish of cadmium

plate with an olive drab chromate after-treatment is used on the PT

and MS/PT. The SP is given a durable non-conductive hard anodic

“Alumilite”^®coating which provides abrasion protection and resis-

tance to corrosion.

cable connecting

receptacle*

Shell components for these series are aluminum. The dependable

5 key/keyway polarization with bayonet lock coupling assures pos-

itive mating with no chance of cross plugging. Spring tension pro-

vided by a wave washer in the coupling nut ensures maintenance

of interfacial seal between mating halves.

Both the insert and main joint gasket are molded from resilient

neoprene. This provides excellent moisture sealing at the gasket

and superior electrical isolation of the contact in the insert.

box mounting

receptacle

Both pins and sockets are machined from a copper alloy and are

gold plated. This gold plating eliminates contact corrosion and

offers an indefinite shelf life. Socket contacts for these series are a

closed entry design. A breakaway style plug is available in the PT

solder series. Hermetics receptacles are available in PT and MS/

PT solder series. Receptacles with printed circuit board contacts

are also available.

straight plug

PT Solder is UL recognized under file #E115497, Vol. 1, Sec. 5.

The PT, SP and MS/PT Series are intermateable and intermount-

able with all existing Miniature Cylindrical Series connectors

except for the threaded coupling PC Series.

jam nut

receptacle

Refer to pages 4-11 for insert arrangement availability.

PT, SP, MS/PT

CONTACT DATA/CONNECTOR RATINGS

Contact Specifications

Contact

Size

Test

Current

Maximum

Millivolt Drop†

Solder Well

Diameter

Solder Well

Depth

thru bulkhead

receptacle

+.004

.046

+.031

.125

20

16

12

7.5

13.0

23.0

55

50

–.000

+.005

.078

+.031

.188

–.003

–.000

+.004

–.002

+.031

–.000

42

.116

.188

breakaway

twist pull

plug

Service Rating

Recommended

Operating

AC Voltage

at Sea Level

Test Voltage AC (RMS), 60 cps

Service

Rating

Sea

Level

50,000

ft.

70,000

ft.

110,000

ft.

I

600

1,500

2,300

500

750

375

500

200

II

1,000

† Silver plated wire per MIL-C-26482

* This connector style is sometimes referred to as a cable connecting

“plug.” It does, however, mate with a straight or 90 degree plug.

12

PT, SP Service Classes

PT and SP connectors are available in the service

classes listed below. Each class, with the exception of

hermetic, offers one or more means of terminating or

supporting a cable or wire bundle. Class “W” is not

available in the SP Series.

“A”

general duty

“A”

General duty; back shell is threaded for con-

duit attachment of MS3057 cable clamp

“A” (SR) General duty, with strain relief clamp for

cable or wire bundle support

“C”

Pressurized receptacle; less than 1 cu. in.

per hour leakage at 30 psi over a tempera-

ture range of –65°F to +257°F

“E”

Environmental resistant connectors - sup-

plied with a multi-holed grommet and clamp-

ing nut for moisture-proofing individual open

wires

“E” (SR),

MS / “F”

strain relief

“E” (SR) Environmental resistant strain relief clamp

and grommet for moisture proofing individual

wires; provides added wire bundle support

“J”

Same as “W” class except with strain relief

“P”

Translucent nylon boot for retaining cus-

tomer-applied potting compounds; held in

place by a threaded ring

“P” (SR) Strain relief clamp suitable for retaining cus-

tomer applied potting compounds, with pro-

vision for wire support

“E”,

MS / “E”

open wire seal

“W”

Compressing clamp and neoprene gland for

moisture proofing multi-conductor jacketed

cables. Telescoping sleeves (MS 3420A)

can be used to adapt to cables smaller than

minimum close-down.

“H”*

Hermetically sealed with compression glass

inserts (see pages 22-25)

“P”,

MS / “P”

potting boot

Style with printed circuit board contacts- see page 20.

Breakaway style - see page 26.

MS/PT Service Classes

The MS/PT Miniature connector is available in the fol-

lowing certified service classes:

“E”

Environmental resistant connectors - sup-

plied with a multi-holed grommet and clamp-

ing nut for moisture-proofing individual open

wires

“W”

cable seal

“F”

“P”

Grommet seal with strain relief clamp

Translucent nylon boot for retaining cus-

tomer-applied potting compounds; held in

place by a threaded ring

13

PT00 (MS3110)

SP00

wall mounting receptacle

S

L

PT

.120 .005 Dia.

R

Q

M

(TP)

(.147 .005 Dia.ꢀ size 24)

SP

.150 .005 Dia.

4 Holes

R

S

A

(TP)

“W” Cable Seal

K

Z

L

TERMINATION ASSEMBLIES

“A” General Duty/

“C” Pressurized“

“A” (SR), “E” (SR), “P” (SR),

MS / “F” Strain Relief

“E” Open Wire Seal

“P” Potting Boot

N

D

L

V

PT00W-XX-XXX

G D H

N

D

N

D

“J” Cable Seal

XL

C

.375 MIN

PT00A-XX-XXX

SP00A-XX-XXX

PT00C-XX-XXX

PT00A-XX-XXX (SR)

SP00A-XX-XXX (SR)

PT00E-XX-XXX (SR)

SP00E-XX-XXX (SR)

PT00P-XX-XXX (SR)

SP00P-XX-XXX (SR)

MS3110F-XX-XXX

PT00E-XX-XXX

SP00E-XX-XXX

MS3110E-XX-XXX

PT00P-XX-XXX

SP00P-XX-XXX

MS3110P-XX-XXX

N

D

PT00J-XX-XXX

To complete part number see how to order on page 27.

MS3110J-XX-XXX

■

(MMC) located within .0025 of (TP)

Receptacle Front View

Receptacle Side View

M +.010

Class “A”, “C”

R

S

K +.020

–.010

Z

Max.

A

+.001

–.005

Q

V

(TP)

Max.

–.000

Shell

Size

L

Thread

D

Min.

L

N

Thread

Class A

PT

SP

PT

SP

PT

SP

Max.

PT

SP

Class 2A

PT

SP

Max. Max.

6

.469 .641 .688 .953 .348 .493 .524 .906 .431 .462 .3125-32 NEF

.468 .438 .175 1.553 .462 .3750-32 NEF

8

.594 .734 .812 1.047 .473 .493 .524 .906 .431 .462 .4375-28 UNEF .468 .438 .297 1.553 .590 .5000-28 UNEF

10

12

14

16

.719 .812 .938 1.125 .590 .493 .524 .906 .431 .462 .5625-24 NEF

.812 .938 1.031 1.250 .750 .493 .524 .906 .431 .462 .6875-24 NEF

.468 .438 .421 1.553 .717 .6250-24 NEF

.468 .438 .546 1.553 .834 .7500-20 UNEF

.906 1.031 1.125 1.344 .875 .493 .524 .906 .431 .462 .8125-20 UNEF .468 .438 .663 1.553 .970 .8750-20 UNEF

.969 1.125 1.219 1.438 1.000 .493 .524 .906 .431 .462 .9375-20 UNEF .468 .438 .787 1.553 1.088 1.0000-20 UNEF

18 1.062 1.203 1.312 1.516 1.125 .493 .524 .906 .431 .462 1.0625-18 NEF

20 1.156 1.297 1.438 1.672 1.250 .650 .650 1.125 .556 .556 1.1875-18 NEF

22 1.250 1.375 1.562 1.750 1.375 .650 .650 1.125 .556 .556 1.3125-18 NEF

24 1.375 1.500 1.688 1.875 1.500 .683 .683 1.188 .589 .589 1.4375-18 NEF

.531 .438 .879 1.553 1.216 1.1875-18 NEF

.531 .531 1.014 1.703 1.332 1.1875-18 NEF

.531 .531 1.134 1.703 1.460 1.4375-18 NEF

.498 .498 1.259 1.765 1.585 1.4375-18 NEF

Class “A” (SR), “E” (SR), “P” (SR), MS / “F”

Class “E”, MS / “E”

Class “P”, MS / “P”

Class “W”, “J”

L

D

Shell

C

D

G

H

L

N

L

N

D

L

N

XL

Size Thread Min.

Max.

Min.

Max.

Closed

–

Free

–

Max.

6

8

–

1.266

1.516

1.578

.440

.560

.192

.317

1.438

1.656

1.717

.484

.608

–

6-32

8-32

.240

.302

.428

.552

.615

.740

.928

.990

.125

.188

.312

.375

.500

.625

.750

.800

.812

1.922

2.047

2.078

2.344

2.406

.550

.168

.205

.338

.416

.550

.600

.635

.670

.740

.230

.312

.442

.539

.616

.672

.747

.846

.894

1.705

1.848

2.040

2.256

2.486

2.922

3.086

3.310

.547

.675

.812

.940

1.067

1.194

1.322

1.449

1.576

2.271

2.411

2.599

2.943

3.172

3.610

3.766

3.985

10

12

14

16

18

20

22

24

.875

.675

.685

.434

.734

1.000

1.125

1.188

1.438

1.625

1.719

.803

.813

.548

.858

.920

.930

.673

.984

1.047

1.165

1.290

1.418

1.543

1.057

1.175

1.301

1.430

1.555

.798

1.110

1.234

1.360

1.484

1.610

.899

1.024

1.149

1.274

All dimensions for reference only.

14

PT01 (MS3111)

cable connecting receptacle

L

S

M

Q

Y

S

A

“W” Cable Seal

L

K

Z

TERMINATION ASSEMBLIES

“A” General Duty

“A” (SR), “E” (SR), “P” (SR),

MS / “F” Strain Relief

“E” Open Wire Seal

“P” Potting Boot

N

D

L

V

PT01W-XX-XXX

N

D

G D H

N

D

N

“J” Cable Seal

XL

C

.375 MIN

PT01A-XX-XXX

PT01A-XX-XXX (SR)

PT01E-XX-XXX (SR)

PT01P-XX-XXX (SR)

MS3111F-XX-XXX

PT01E-XX-XXX

MS3111E-XX-XXX

PT01P-XX-XXX

MS3111P-XX-XXX

N

D

Note: This connector style is sometimes referred to as a cable connecting “plug”.

It does, however, mate with either a straight or 90 degree plug.

To complete part number see how to order on page 27.

PT01J-XX-XXX

MS3111J-XX-XXX

Recept. Front View

Receptacle Side View

M

Class “A”,

A

K

Q

V

Shell

Size

S

±.020

Y

±.020

+.001

–.005

+.020

–.010

L

Max.

+.016

–.000

Thread

Class 2A

Z

D

L

Max.

N

Max.

Thread

Class A

Max.

.948

1.166

Min.

.175

.297

.421

.546

.663

.787

.879

1.041

1.135

1.259

6

8

.688

.812

.938

.348

.473

.494

.650

.683

.906

.400

.535

.568

.3125-32 NEF

.4375-28 UNEF

.5625-24 NEF

.6875-24 NEF

.8125-20 UNEF

.9375-20 UNEF

1.0625-18 NEF

1.1875-18 NEF

1.3125-18 NEF

1.4375-18 NEF

1.553

1.703

1.765

.462

.590

.3750-32 NEF

.5000-28 UNEF

.6250-24 NEF

.7500-20 UNEF

.8750-20 UNEF

1.0000-20 UNEF

1.1875-18 NEF

1.4375-18 NEF

10

12

14

16

18

20

22

24

.938

1.062

1.156

1.250

1.344

1.438

1.562

1.688

1.812

.590

.906

.717

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.750

.906

.834

.875

.906

.970

1.000

1.125

1.250

1.375

1.500

.906

1.088

1.216

1.332

1.460

1.585

.906

1.125

1.188

Class “A” (SR), “E” (SR), “P” (SR), MS / “F”

Class “E”, MS / “E”

Class “P”, MS / “P”

Class “W”, “J”

L

D

Shell

C

D

G

H

L

N

L

N

D

L

N

XL

Size Thread Min.

Max.

Min.

Max.

Closed

Free

–

Max.

6

8

–

1.266

1.516

1.578

.440

.560

.192

.317

1.438

1.656

1.717

.484

.608

–

6-32

8-32

.240

.302

.428

.552

.615

.740

.928

.990

.125

.188

.812 1.922

.875 1.922

.550

.675

.803

.920

.168

.205

.338

.416

.550

.600

.635

.670

.740

.230

.312

.442

.539

.616

.672

.747

.846

.894

1.705

1.848

2.040

2.256

2.486

2.922

3.086

3.310

.547

.675

.812

.940

1.067

1.194

1.322

1.449

1.576

2.271

2.411

2.599

2.943

3.172

3.610

3.766

3.985

10

12

14

16

18

20

22

24

.685

.434

.734

.312 1.000 1.922

.375 1.125 1.922

.813

.548

.858

.930

.673

.984

.500 1.188 2.047 1.047

.625 1.438 2.078 1.165

.625 1.438 2.344 1.290

.750 1.625 2.344 1.418

.800 1.719 2.406 1.543

1.057

1.175

1.301

1.430

1.555

.798

1.110

1.234

1.360

1.484

1.610

.899

1.024

1.149

1.274

All dimensions for reference only.

15

PT02 (MS3112)

SP02

box mounting receptacle

S

R

(TP)

L

PT

.120 .005 Dia.

M

(.147 .005 Dia.ꢀ size 24)

SP

.150 .005 Dia.

4 Holes

R

A

N

S

(TP)

K

Z

PT02A-XX-XXX

SP02A-XX-XXX

* PT02C-XX-XXX

* SP02C-XX-XXX

* PT02E-XX-XXX

* SP02E-XX-XXX

MS3112E-XX-XXX

* PT02P-XX-XXX

* SP02P-XX-XXX

MS3112P-XX-XXX

* PT02W-XX-XXX

* SP02W-XX-XXX

To complete part number see how to order on page 27.

■

(MMC) located within .0025 of (TP)

*

The PT02 and SP02 box mounting receptacles are made only to complete a series;

no provision is made for accessories or potting on the rear skirt.

Receptacle Front View

Receptacle Side View

K

M

R

(TP)

+.020

–.010

+.010

–.000

Z

Max.

A

+.001

–.005

N

Dia.

Max.

S

Shell

Size

L

PT

.469

SP

PT

SP

PT

SP

Max.

.825

PT

SP

PT

SP

6

8

.641

.688

.953

.348

.473

.493

.650

.683

.524

.650

.683

.431

.556

.589

.462

.556

.589

.323

.449

.465

.526

.493

.438

.531

.497

.594

.734

.812

1.047

1.125

1.250

1.344

1.438

1.516

1.672

1.750

1.875

.825

10

12

14

16

18

20

22

24

.719

.812

.938

.590

.825

.573

.812

.938

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.750

.825

.699

.906

1.031

1.125

1.203

1.297

1.375

1.500

.875

.825

.823

.969

1.000

1.125

1.250

1.375

1.500

.825

.949

1.062

1.156

1.250

1.375

.825

1.073

1.199

1.323

1.449

1.076

1.109

All dimensions for reference only.

16

PT06 (MS3116)

SP06

straight plug

S

L

J

Z

Q

“W” Cable Seal

L

TERMINATION ASSEMBLIES

“A” General Duty

“A” (SR), “E” (SR), “P” (SR),

MS / “F” Strain Relief

“E” Open Wire Seal

“P” Potting Boot

L

N

D

V

N

D

G D H

N

D

N

PT06W-XX-XXX

SP06W-XX-XXX

PTG06W-XX-XXX

C

“J” Cable Seal

.375 MIN

XL

PT06A-XX-XXX

SP06A-XX-XXX

PTG06A-XX-XXX

PT06A-XX-XXX (SR)

SP06A-XX-XXX (SR)

PTG06A-XX-XXX (SR)

PT06E-XX-XXX (SR)

SP06E-XX-XXX (SR)

PTG06E-XX-XXX (SR)

PT06P-XX-XXX (SR)

SP06P-XX-XXX (SR)

PTG06P-XX-XXX (SR)

MS3116F-XX-XXX

PT06E-XX-XXX

SP06E-XX-XXX

PTG06E-XX-XXX

MS3116E-XX-XXX

PT06P-XX-XXX

SP06P-XX-XXX

PTG06P-XX-XXX

MS3116P-XX-XXX

N

D

PT06J-XX-XXX

MS3116J-XX-XXX

To complete part number see how to order on page 27.

Plug Front View

Plug Side View

Q Thread

Class 2A

Class “A”

Shell

Size

S

Max.

L

Max.

Z

Max.

D

Min.

L

Max.

N

Max.

V Thread

Class A

J

6

8

.625

.750

.353

.415

.906

.3125-32 NEF

.4375-28 UNEF

.5625-24 NEF

.6875-24 NEF

.8125-20 UNEF

.9375-20 UNEF

1.0625-18 NEF

1.1875-18 NEF

1.3125-18 NEF

1.4375-18 NEF

.594

.672

.175

1.609

1.656

1.750

.462

.590

.3750-32 NEF

.5000-28 UNEF

.6250-24 NEF

.7500-20 UNEF

.8750-20 UNEF

1.0000-20 UNEF

1.1875-18 NEF

1.4375-18 NEF

.297

10

12

14

16

18

20

22

24*

.859

.906

.421

.717

1.013

1.156

1.281

1.319

1.531

1.656

1.776

.906

.546

.834

.906

.663

.970

.906

.787

1.088

1.216

1.332

1.460

1.587

.906

.879

1.062

1.125

1.014

1.135

1.259

Class “A” (SR), “E” (SR), “P” (SR), MS / “F”

Class “E”, MS / “E”

Class “P”, MS / “P”

Class “W”, “J”

D

Shell

C

D

G

H

L

N

L

N

D

L

N

L

N

XL

Size Thread Min.

±.010

Max.

Min.

Max.

Closed

Free

–

Max.

6

8

–

1.266

1.438

1.500

.440

.560

.192

.317

1.526

1.546

1.656

.484

.608

–

6-32

8-32

.240

.302

.428

.552

.615

.740

.928

.990

.125

.188

.312

.375

.500

.625

.750

.800

.812

1.906

2.047

2.078

2.250

2.312

.550

.168

.205

.338

.416

.550

.600

.635

.670

.740

.230

.312

.442

.539

.616

.672

.747

.846

.894

1.705

1.848

2.040

2.256

2.486

2.844

3.000

3.210

.547

2.271

2.411

2.599

2.943

3.172

3.610

3.766

3.985

10

12

14

16

18

20

22

24*

.875

.675

.685

.434

.734

.675

1.000

1.125

1.188

1.438

1.625

1.750

.803

.813

.548

.858

.812

.920

.930

.673

.984

.940

1.047

1.165

1.290

1.418

1.543

1.057

1.175

1.301

1.430

1.555

.798

1.110

1.234

1.360

1.484

1.610

1.067

1.194

1.322

1.449

1.576

.899

1.024

1.149

1.274

* Available in PT06 only

All dimensions for reference only.

17

PT07 (MS3114)

SP07

jam nut receptacle

S

H

M

Z

“A” General Duty/

“C” Pressurized Receptacle

PT07A-XX-XXX

S

A

J

PT07C-XX-XXX

R

P

K

TERMINATION ASSEMBLIES

“E” Open Wire Seal

“A” (SR), “E” (SR), “P” (SR), MS / “F” Strain Relief

“P” Potting Boot

M

Z

M

Z

M

Z

GD H

D N

N

A

J

C

L

R

P

L

P

L

PT07E-XX-XXX

SP07E-XX-XXX

MS3114E-XX-XXX

PT07A-XX-XXX (SR)

SP07A-XX-XXX (SR)

PT07E-XX-XXX (SR)

MS3114F-XX-XXX

PT07P-XX-XXX

MS3114P-XX-XXX

To complete part number see how to order on page 27.

Recept. Front View

Receptacle Side View

P Panel Thickness

Class “E”, MS / “E”

N

A Dia.

+.001

–.005

J Flat

+.000

–.010

K

+.011

–.010

R

Shell

Size

H

Thread

Class 2A UNEF

L

Max.

Z

±.016

S

M

Min.

.062

Max.

.125

.250

Z

M

Max.

±.040

6

8

.625

.750

.812

.348

.473

.405

.530

.125

.156

.696

.884

.917

.4375-28

.231

.261

.228

.568

.630

.660

.696

.884

.917

.604

.191

.221

.188

.938

.5625-24

.729

10

12

14

16

18

20

22

24

.875

1.062

1.250

1.375

1.500

1.625

1.812

1.938

2.062

.590

.655

.6875-24

.854

1.062

1.188

1.312

1.438

1.562

1.688

1.816

.750

.818

.8750-20

.979

.875

.942

1.0000-20

1.1250-18

1.2500-18

1.3750-18

1.5000-18

1.6250-18

1.104

1.229

1.354

1.510

1.635

1.760

1.000

1.125

1.250

1.375

1.500

1.066

1.191

1.316

1.441

1.566

Class “A” (SR), “P” (SR), MS / “F”

D

Class “E” (SR)

Class “P”, MS / “P”

Shell

Size Thread

C

D

Max.

D

Max.

L +.010

–.026

Max.

G

H

L

M

Thread

G

H

L

M

N

Z

6

8

–

.202

.327

.593

.718

.696

.884

.917

.484

.191

.221

.188

6-32

8-32

.250

.312

.438

.562

.625

.750

.938

1.000

.125

.188

.312

.375

.500

.625

.750

.800

.781

.844

.969

1.094

1.156

1.406

1.594

1.062

1.188

1.250

.696

.884

.917

6-32

8-32

.250

.312

.438

.562

.625

.750

.938

1.000

.125

.188

.312

.775 1.029 .696

.837 1.029 .696

.963 1.029 .696

.608

10

12

14

16

18

20

22

24*

.444

.734

.558

.858

.375 1.087 1.029 .696

.500 1.150 1.161 .696

.625 1.400 1.161 .696

.625 1.400 1.224 .884

.750 1.587 1.224 .884

.800 1.681 1.320 .917

.683

.984

.808

1.110

1.234

1.360

1.484

1.610

.909

1.034

1.159

1.284

* Size 24 strain relief available in PT only.

All dimensions for reference only.

18

PT08 E

SP08 E

90 degree plug

G

TERMINATION ASSEMBLIES

“E” Open Wire Seal, “E” (SR) Strain Relief

“P” Potting Boot 75 degrees

L

E

B

A

K

H

PT08E-XX-XXX

SP08E-XX-XXX

PT08E-XX-XXX (SR)

SP08E-XX-XXX (SR)

PT08P-XX-XXX

SP08P-XX-XXX

D

C

To complete part number see how to order on page 27.

All lockwire holes are .044 Dia. Min.

Plug Front View

Plug Side View

Class “E”, “E” (SR)

Class “P”

G

C

E

Shell

Size

Dia.

Max.

B

±.031

+.010

–.025

D

±.062

+.047

–.025

L

A

±.025

H

K

±.015

L

Max.

±.057

±.015

.312

.438

.516

.625

.656

.703

.766

.812

.918

8

10

12

14

16

18

20

22

24

.796

.921

.655

.749

.169

.170

.264

.310

.330

.444

.510

.515

.656

.941

1.191

1.254

1.316

1.562

1.625

1.719

1.751

.339

.393

.450

.519

.583

.621

.683

.739

.797

1.786

1.880

1.965

2.113

2.315

2.423

2.695

2.742

2.980

.469

.547

.625

.734

.750

.781

.859

.906

1.169

.438

.562

1.656

1.781

1.843

1.953

2.000

2.046

2.218

2.265

2.624

1.046

1.171

1.297

1.422

1.562

1.672

1.797

.812

.688

.905

.781

1.030

1.015

1.077

1.139

1.265

.890

1.000

1.125

1.234

1.374

All dimensions for reference only.

19

PT Conne ctors with

Printe d Circuit Board Contacts

S

4 HOLES

.120 .005 Dia.

(.147 .005 Dia.ꢀ size 24)

L

R

M

.030 .001

(TP)

Box Mounting Receptacle (PT02)

with PCB Contacts

R

S

A

N

(TP)

Order by applicable part number in chart below;

add insert arrangement number. Refer to insert availability

on pages 4-11.

■

(MMC) located within .0025 of (TP)

Z

K

Receptacle Front View

S

Receptacle Side View

M

Part Number*

A

K

N

Z

Shell

Size

PT02 with PCB

Contacts

R

(TP)

+.011

–.010

+.001

–.005

+.021

–.010

L

Max.

+.010

–.000

Dia.

Max.

+.040

–.050

6

8

71-570120-XXX

71-570121-XXX

71-570122-XXX

71-570123-XXX

71-570124-XXX

71-570125-XXX

71-570126-XXX

71-570127-XXX

71-570128-XXX

71-570129-XXX

.469

.594

.688

.812

.348

.473

.493

.650

.683

.825

.431

.556

.589

.323

.449

.380

.286

.253

10

12

14

16

18

20

22

24

.719

.938

.590

.825

.573

.812

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.750

.825

.699

.906

.875

.825

.823

.969

1.000

1.125

1.250

1.375

1.500

.825

.949

1.062

1.156

1.250

1.375

.825

1.073

1.199

1.323

1.449

1.076

1.109

All dimensions for reference only.

S

H

M

Z

Jam Nut Receptacle (PT07)

with PCB Contacts

A

J

S

All lockwire holes are .044 Dia. Min.

.030 .001

Order by applicable part number in chart below;

add insert arrangement number. Refer to insert availability

on pages 4-11.

R

P

K

Receptacle Front

View

Receptacle Side View

P Panel

Part Number*

PT07 with PCB

Contacts

H

A Dia.

+.001

–.005

J Flat

+.000

–.010

K

+.011

–.010

R

Z

Thickness

Shell

Size

+.017

–.016

S

±.010

M

Thread

Class 2A

+.025

–.035

±.010

.696

.884

.917

Min.

.062

Max.

.125

6

8

71-533720-XXX

71-533721-XXX

71-533722-XXX

71-533723-XXX

71-533724-XXX

71-533725-XXX

71-533726-XXX

71-533727-XXX

71-533728-XXX

71-533729-XXX

.625

.750

.812

.938

.348

.473

.405

.530

.125

.156

.4375-28 UNEF

.5625-24 UNEF

.6875-24 UNEF

.8750-20 UNEF

.376

.367

.334

10

12

14

16

18

20

22

24

.875

1.062

1.250

1.375

1.500

1.625

1.812

1.938

2.062

.590

.655

1.062

1.188

1.312

1.438

1.562

1.688

1.816

.750

.818

.875

.942

.125 1.0000-20 UNEF

.125 1.1250-18 UNEF

.125 1.2500-18 UNEF

.250 1.3750-18 UNEF

.250 1.5000-18 UNEF

.250 1.6250-18 UNEF

1.000

1.125

1.250

1.375

1.500

1.066

1.191

1.316

1.441

1.566

All dimensions for reference only.

* For RoHS compliance connectors with PCB contacts change “71”- to:

“58” designates conductive black zinc cobalt plating

“93” designates non-conductive black zinc cobalt plating

20

PTB

SPB

thru bulkhead receptacle

L

S

M

PTB

.120 .005 Dia.

R

P

(TP)

(.147 .005 Dia.ꢀ size 24)

SPB

.150 .005 Dia.

4 Holes

R

S

A

(TP)

K

* PTB-XX-XXX

* SPB-XX-XXX

* To complete part number add desired arrangement number (refer to pages 4 and 5 for insert availability) and add “PS”;

Example: PTB-18-32PS. If a rotation is required, use PTB-18-32PS and add W, X, Y or Z. Example: PTB-18-32 PSW.

The socket end of the insert always appears at the “P” dimension end of shell.

■

(MMC) located within .0025 of (TP)

Receptacle Front View

Receptacle Side View

M

R

P

A

+.001

–.005

K

+.016

–.000

(TP)

S

Max.

Shell

Size

L

+.010

–.000

PTB

.469

SPB

.641

PTB

.688

SPB

.953

±.005

PTB

.125

SPB

.188

.312

6

8

.348

.473

.625

.781

1.050

1.330

.562

.688

.594

.734

.812

1.047

1.125

1.250

1.344

1.438

1.516

1.672

1.750

1.875

10

12

14

16

18

20

22

24

.719

.812

.938

.590

.812

.938

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.750

.906

1.031

1.125

1.203

1.297

1.375

1.500

.875

.969

1.000

1.125

1.250

1.375

1.500

1.062

1.156

1.250

1.375

All dimensions for reference only.

21

PT

hermetic

Three shell styles are available in the hermetic PT bayonet

series:

•

PTIH (MS3113H)

PT02H

PT07H (MS3114H)

These hermetic connectors are only available with solder cup or

flat eyelet pin contacts in the MS/PT version. Socket contacts

are available in some proprietary PT versions. Other design

characteristics of the PT hermetic connector series are as fol-

lows:

solder

mounting

receptacle

Shell sizes: 8 through 24 (tin plated)

Contact count: 2 through 61. Refer to pages 4 and 5 for insert

availability for hermetics.

Current:

5.0 amp each #20 contact

10 amp each #16 contact

17 amp each #12 contact

Contacts are tin plated for PT; gold is optional

Dielectric Withstanding Voltage (sea level):

1500 volts (RMS) 60 cps, Service Rating I

2300 volts (RMS) 60 cps, Service Rating II

Compression glass inserts, permanently lettered

Helium Leakage: Less than 1.0 X 10^-6cc/sec.

at 15 psi differential

box

mounting

receptacle

Physical Shock: 100 G’s

Vibration: Exceeds MIL-E-5272 Procedure II

Thermal Shock: No deterioration or failure after 5 cycles

at –55°F to +257°F

Intermateability: Mates with MS3116 and PT06

Refer to pages 4-11 for insert arrangement availability.

jam nut

receptacle

22

PTIH (MS3113H)

hermetic solder mounting receptacle

L

W

G

A

N

.031 +.006

–.005

Z

*

PTIH-XX-XXX

** PTIY-XX-XXX

** MS3113H-XXCXXX

PTIH-XX-XXX (100)

†

†† PTIY-XX-XXX (100)

†† MS3113H-XXYXXX

To complete part number see how to order on page 27.

Solder cup pin contacts without interfacial seal

** Solder cup pin contacts with interfacial seal

Flat eyelet pin contacts without interfacial seal

*

†

†† Flat eyelet pin contacts with interfacial seal

Recept.

Front View

Receptacle

Side View

G

Dia.

Max.

A Dia.

+.001

–.005

L

N Dia.

+.001

–.005

W

+.011

–.010

Shell

Size

+.025

–.016

Z

Max.

.386

.418

6

8

.511

.636

.348

.473

.447

.509

.542

.438

.562

.094

.125

10

12

14

16

18

20

22

24

.761

.590

.672

.855

.750

.781

.980

.875

.906

1.105

1.229

1.323

1.449

1.574

1.000

1.125

1.250

1.375

1.500

1.031

1.156

1.250

1.375

1.500

All dimensions for reference only.

23

PT02H

hermetic box mounting receptacle

PT

S

.120 .005 Dia.

R

L

W

(.147 .005 Dia.ꢀ size 24)

(TP)

SP

.150 .005 Dia.

4 Holes

R

S

A

N

Z

(TP)

U

*

PT02H-XX-XXX

** PT02Y-XX-XXX

PT02H-XX-XXX (100)

†† PT02Y-XX-XXX (100)

†

To complete part number see how to order on page 27.

Solder cup pin contacts without interfacial seal

** Solder cup pin contacts with interfacial seal

Flat eyelet pin contacts without interfacial seal

†† Flat eyelet pin contacts with interfacial seal

*

†

■

(MMC) located within .0025 of (TP)

Receptacle Front View

Receptacle Side View

A Dia.

+.001

–.005

L

N Dia.

+.001

–.005

U

+.011

–.010

Shell

Size

R

(TP)

S

±.016

K

±.015

+.025

–.015

Z

Max.

6

8

.469

.594

.688

.812

.348

.473

.047

.079

.494

.556

.588

.438

.562

.062

.344

.377

10

12

14

16

18

20

22

24

.719

.938

.590

.672

.812

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.750

.781

.906

.875

.906

.969

1.000

1.125

1.250

1.375

1.500

1.031

1.156

1.250

1.375

1.500

1.062

1.156

1.250

1.375

All dimensions for reference only.

24

PT07H (MS3114H)

hermetic jam nut receptacle

S

H

M

Z

S

A

R

P

K

*

PT07H-XX-XXX

** PT07Y-XX-XXX

** MS3114H-XXCXXX

†

PT07H-XX-XXX (100)

†† PT07Y-XX-XXX (100)

†† MS3114H-XXYXXX

To complete part number see how to order on page 27.

Solder cup pin contacts without interfacial seal

** Solder cup pin contacts with interfacial seal

Flat eyelet pin contacts without interfacial seal

*

†

†† Flat eyelet pin contacts with interfacial seal

Receptacle Front

View

Receptacle Side View

P Panel Thickness

H Hex

+.017

–.016

A

+.001

–.005

K

+.043

–.016

M

+.031

–.000

R

Shell

Size

S

+.016

Thread

Class 2A

Z

Max.

.125

.250

Min.

.062

6

8

.812

.938

.625

.750

.348

.473

.094

.125

.696

.884

.917

.4375-28 UNEF

.5625-24 NEF

.6875-24 NEF

.8750-20 UNEF

1.0000-20 UNEF

1.1250-18 NEF

1.2500-18 NEF

1.3750-18 NEF

1.5000-18 NEF

1.6250-18 NEF

.206

.081

.048

10

12

14

16

18

20

22

24

1.062

1.250

1.375

1.500

1.625

1.812

1.938

2.062

.875

.590

1.062

1.188

1.312

1.438

1.562

1.688

1.812

.750

.875

1.000

1.125

1.250

1.375

1.500

All dimensions for reference only.

25

PT Bre akawa y

twist pull plug

4.500

±.250

The PT miniature breakaway connector has the follow-

ing design features:

L

J

+.010

–.025

• solder contacts, potted termination

.016

SOCKET INSERT

• instant decoupling of plug and receptacle with an

axial pull on the lanyard when they are fully mated

• intermateable with standard receptacles

• operating voltage to 900 VAC (RMS) at sea level

• same quick positive bayonet coupling and 5 key/

keyway polarization as other PT styles

+.010

–.025

.328

PIN INSERT

H

B

LANYARD PULLED TAUT

AGAINST A .200 ±.031 DIA MANDREL

A

Breakaway Plug

with PT Solder Contacts,

Potted Termination

71-3048XX-(

72-3048XX-(

)

Part

Number*

Shell

Size

A Dia.

Max.

B

Max.

H

±.016

J

L

Max.

±.010

71-304808

71-304810

71-304812

71-304814

71-304816

71-304818

71-304820

71-304822

71-304824

8

.875

1.125

1.281

1.438

1.562

1.718

1.875

2.031

2.156

.984

1.125

1.406

1.562

1.688

1.844

2.000

2.188

2.312

.327

.444

.353

.415

1.937

1.890

1.906

1.953

2.000

2.031

2.234

2.328

2.359

10

12

14

16

18

20

22

24

.558

.683

.808

.909

1.034

1.159

1.284

All dimensions for reference only.

* See Finish information below to determine prefix 71 or 72 in part number.

Drawing above shows standard lanyard length.

Order by Amphenol Propriety number as follows (example part number shown):

71 -

3048 18

-

32

P

1

2

3

4

1. Finish

“71”designates corrosion resistant olive drab cadmium plate

“72” designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and

corrosion resistance, 500 hour extended salt spray.

2. Connector Type Identification

3048 designates PT plug, solder, potted termination style

3. Shell Size and Insert Arrangement Number

See insert arrangement availability for Miniature Breakaway connectors on page 6. The numbers in the insert

arrangement are hyphenated. The number preceding the hyphen is the shell size. The number following the hyphen is

the insert arrangement number.

4. Contact Type/Alternate Insert Rotation

Pin Contacts

Socket Contacts

P designates pin, S designates socket for normal

positioning of inserts. When an alternate position

of the insert is required to prevent cross-mating

a different letter (other than P or S) is used. See

page 7 for description of alternate positions; then

convert to Amphenol proprietary coding by the

chart at right to complete the part number.

Amphenol Equates to Amphenol Equates to

Letter

MS letter

PW

Letter

MS letter

SW

G

I

H

J

PX

SX

K

M

PY

L

SY

PZ

N

SZ

26

PT, SP, MS/PT

how to order

PT, SP

MS/PT

MIL-C-26482, Series 1

Part number MS3110E20-41PW is shown as follows:

To more easily illustrate ordering procedure, part number PT00A-20-41PW(SR) is

shown as follows:

PT

00

A

-

20

-

41

P

W

(SR)

MS

311

0

E

20

-

41

P

W

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

See code below:

1. Connector Type

For Hermetic connectors part number

MS3113H20Y41PW is shown as follows:

“PT” designates standard olive drab, electrically conductive cadmium plate

bayonet lock connector with solder contacts

“SP” designates electrically non-conductive, hard anodic coated bayonet lock

connector with solder contacts and larger flange and mounting holes for

back panel mounting

MS

311

3

H

20 Y 41

P

7

W

8

1

2

3

4

5, 6

See code below:

1. “MS” designates Military Standard

2. Specification Number

“PTG” designates plug with grounding fingers

2. Shell Style

“311” designates basic family number for MIL-C-

26482, Series 1 solder type

3. Shell Style

“00”

“01”

“02”

“06”

“07”

“08”

“B”

designates wall mounting receptacle

designates cable connecting receptacle**

designates box mounting receptacle

designates straight plug

“0” designates wall mounting receptacle

“1” designates cable connecting receptacle**

“2” designates box mounting receptacle

“3” designates solder mount receptacle (hermetic

only)

designates jam nut receptacle

designates 90 degree plug cable support

designates thru bulkhead receptacle (pressurized)

designates solder mount receptacle (Hermetic only)

“I”

“4” designates jam nut receptacle

“6” designates straight plug

3. Service Classes

“A”

“C”

“E”

“J”

designates general duty back shell

designates pressurized receptacle

designates environmental resisting open wire seal with grommet and nut

designates clamp assembly for moisture proofing multi-jacketed cables,

with strain relief

designates assembly with potting boot

designates clamp assembly for moisture proofing multi-jacketed cables

designates hermetic* without interfacial seal

4. Service Class

“E” designates environmental resisting connector

“F” designates environmental resisting connectors

with strain relief

“J” designates clamp assembly for moisture proofing

multi-jacketed cables, with strain relief

“P” designates potted type with potting boot

“H” designates hermetic

“P”

W”

“H”

“Y”

5. Shell Size

designates hermetic* with interfacial seal

“20” designates shell size. Shell sizes 8 through 24

available.

4. Shell Size

“20” designates shell size. Shell sizes 6 through 24 available.

6. Insert Arrangement - Refer to pages 4-11 for insert

availability.

5. Insert Arrangement - Refer to pages 4-11 for insert availability.

“20 - 41” designates insert arrangement. (The number following the hyphen is

the number only that is used in the part number).

6. Contacts

“20 - 41” designates arrangement. (The number fol-

lowing the hyphen is the number only that is used in

the part number).

“P” designates pin contacts

“S” designates socket contacts

Hermetic version

“20Y41” designates insert arrangement; specify “Y”

for flat eyelet pin contacts, or “C” for solder cup pin

contacts

For ordering connectors with printed circuit board contacts, see pg. 20.

7. Insert Rotation - Refer to page 7.

“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from “normal position.

No letter required for normal (no rotation) position.

8. “SR” designates a strain relief clamp.

7. Contact Configuration

“P” designates pin contacts

“S” designates socket contacts

Indicate optional finishes as follows:

8. Insert Rotation- Refer to page 7.

“W”, “X”, “Y”, “Z” designate that insert is rotated in it

shell from “normal” position. No letter require fo nor-

mal (no rotation) position.

(003) olive drab cadmium plate (standard on “PT”)

(005) anodic coating - Alumilite^®(standard on “SP”)

(014) olive drab cadmium plate over nickel

(023) electroless nickel

(024) olive drab zinc cobalt plating

(424) electroless nickel finish with strain relief

(466) olive drab zinc cobalt plating with strain relief

(100) Suffix added for flat eyelet pin contacts in hermetic versions

*

Hermetic connectors are supplied with tin plated shells.

** This connector style is sometimes referred to as a cable connect-

ing “plug”. It does, however, mate with either a straight or 90

degree plug.

OR

h

RoHS Compliant finish suffix as follow:

(025) non-conductive black zinc cobalt plating

(027) conductive black zinc cobalt plating

(470) non-conductive black zinc cobalt plating

with strain relief

(476) conductive black zinc cobalt plating with strain relief

For ordering Miniature Breakaway PT Solder connec-

tors see pg. 26.

2

27

Amphe nol ^®PT-SE, SP-SE, MS/PT-SE

Proprietary/MIL-C-26482, Series 1

bayonet coupling and crimp termination

Amphenol^®SE crimp type miniature connectors provide

performance and versatility needed for applications

demanding high reliability and crimp removable contacts.

These crimp contacts are rear insertable/front release and

are held in position by an MS approved spring tower reten-

tion system.

wall mounting

receptacle

The MS/PT-SE Series is qualified to MIL-C-26482, Series 1 and

has all the outstanding design characteristics and quality of the

PT Series.

The SP-SE Series is a modification of the PT-SE, providing

special shells with a wide mounting flange for back panel

mounting.

cable

connecting

receptacle*

A corrosion resistant electrically conductive finish of cadmium

plate with an olive drab chromate after-treatment is used on the

PT-SE and MS/PT-SE. The SP-SE is given a durable non-con-

ductive hard anodic “Alumilite”^®coating which provides abra-

sion protection and resistance to corrosion.

Shell components for these series are aluminum. The depend-

able 5 key/keyway polarization with bayonet lock coupling

assures positive mating with no chance of cross plugging.

Spring tension provided by a wave washer in the coupling nut

ensures maintenance of interfacial seal between mating halves.

box mounting

receptacle

Both the insert and main joint gasket are molded from resilient

neoprene. This provides excellent moisture sealing at the gas-

ket and superior electrical isolation of the contact in the insert.

Both pins and sockets are machined from a copper alloy and

are gold plated. This gold plating eliminates contact corrosion

and offers an indefinite shelf life. Socket contacts for these

series are a closed entry design.

straight plug

Breakaway style plug is available in PT-SE crimp.

The PT-SE, SP-SE and MS/PT-SE Series are intermateable

and intermountable with all existing Miniature Cylindrical Series

connectors except for the threaded coupling PC Series.

jam nut

receptacle

Refer to pages 4-11 for insert arrangement availability.

*

This connector style is sometimes referred to as a cable connecting “plug”.

It does, however, mate with either a straight or 90 degree plug.

breakaway

twist pull

plug

28

PT-SE. SP-SE, MS/PT-SE

Contact Specifications

Maximum

Millivolt

Drop†

Contact

Size

Test

Current

Crimp Well

Diameter

Minimum

Well Depth

20

16

12

7.5

13.0

23.0

55

49

42

.049 ±.001

.067 ±.001

.100 ±.002

.267

.236

“SE”,

MS / “E”

Service Rating

open wire seal

Recommended

Operating

Test Voltage AC (RMS), 60 cps

Service

Rating

AC Voltage

at Sea Level

Sea

Level

50,000 70,000 110,000

ft.

I

600

1,500

2,300

500

750

375

500

200

II

1,000

† Silver plated wire per MIL-C-26482

PT-SE and SP-SE Service Classes

PT-SE and SP-SE connectors are available in the

three service classes listed below.

“SE” (SR),

MS / “F”

strain relief

clamp

“SE”

Open wire sealing - environmental resistant,

with a nut and grommet for moisture proof-

ing individual wires

“SE” (SR)Strain relief clamp - environmental resistant

strain relief clamp and grommet for moisture

proofing individual wires; provides added

wire bundle support

“SP”

Translucent nylon boot for retaining cus-

tomer applied potting compounds; held in

place by a threaded ring

Breakaway style - see page 38.

MS/PT-SE Service Classes

“SP”,

MS / “P”

potting boot

MS-SE series connectors are available in the following

certified service classes:

“E”

Open wire sealing - environmental resisting

connectors are supplied with a multi-hole

grommet and clamping nut for moisture

proofing individual open wires

“F”

“P”

Environmental resistant strain relief clamp

and grommet for moisture proofing individual

wires; provides added wire bundle support

Potting applications - these connectors are

supplied with a translucent nylon boot for

retention of customer applied potting com-

pound

29

PT00 SE (MS3120)

SP00 SE

wall mounting receptacle

S

T Dia.

R

4 Holes

(TP)

R

S

(TP)

TERMINATION ASSEMBLIES

“SE” (SR), MS / “F” Strain Relief

“SE” Open Wire Seal

“SP” Potting Boot

L

M

K

A

N

A

D N

A

G

N

M

K

M

K

PT00SE-XX-XXX

SP00SE-XX-XXX

MS3120E-XX-XXX

PT00SE-XX-XXX (SR)

SP00SE-XX-XXX (SR)

MS3120F-XX-XXX

PT00SP-XX-XXX

SP00SP-XX-XXX

To complete part number see how to order on page 39.

(MMC) located within .005 of (TP)

■

Receptacle Front View

Receptacle Side View

M

R

(TP)

S

Max.

T Dia.

± .005

+.010

–.000

P*

A Dia.

+.001

–.005

Max. Panel Thickness

Shell

Size

K

±.016

PT

.594

SP

PT

SP

PT

SP

PT

SP

PT

SP

8

10

12

14

16

18

20

22

24

–

.828

–

.120

.147

–

.473

.590

.062

.094

.431

.556

.589

–

.094

.219

–

.719

.812

.938

1.031

1.125

1.203

1.297

1.375

1.500

.954

1.141

1.266

1.360

1.453

1.532

1.688

1.766

1.891

.150

.462

.556

.589

.125

.219

.812

1.047

1.141

1.234

1.328

1.453

1.578

1.703

.750

.906

.875

.969

1.000

1.125

1.250

1.375

1.500

1.062

1.156

1.250

1.375

Class “SE”, MS / “E”

Class “SE” (SR), MS / “F”

Class “SP”, MS / “P”

Shell

Size

L

Max.

N Dia.

Max

G

Dia.

L

Max.

N

Max.

D Dia.

Max.

L

Max.

N Dia.

Max.

8

10

12

14

16

18

20

22

24

1.328

1.359

1.422

.560

.704

.125

.188

.312

.375

.500

.625

.750

.800

2.422

2.537

2.824

2.900

.781

.844

–

.444

.558

.683

.808

.909

1.034

1.159

1.284

1.656

1.750

1.782

.734

.825

.969

.858

.954

1.094

1.156

1.406

1.594

1.688

.984

1.080

1.204

1.330

1.454

1.580

1.110

1.234

1.360

1.484

1.610

* Back panel mounting

All dimensions for reference only.

30

MF00 SE (MS3128)

wall mounting receptacle

T¹ Dia.

4 Holes

S

R¹

(TP)

R

(TP)

R

R¹

S

(TP) (TP)

T Dia.

4 Holes

TERMINATION ASSEMBLIES

MS / “E” Open Wire Seal

MS / “F” Strain Relief

L

K

L

M

N

A

G F N

M

K

MF00SE-XX-XXX

MS3128E-XX-XXX

MF00SE-XX-XXX (SR)

MS3128F-XX-XXX

To complete part number see how to order on page 39.

(MMC) located within .0025 of (TP)

■

Receptacle Front View

Receptacle Side View

Class MS / “E”

Class MS / “F”

A Dia.

+.001

–.005

M

+.010

–.000

Shell

Size

S

Max.

T Dia.

T¹Dia.

±.005

K

±.016

L

N

F

G

Dia.

L

Max.

N

Max.

R

R¹

±.005

.120

.147

Max.

Min.

10

12

14

16

18

20

22

24

.719

.812

1.141

1.266

1.360

1.453

1.532

1.688

1.766

1.891

.150

.590

.750

.062

.094

.462

.556

.589

1.328

1.359

1.422

.685

.813

.297

.422

.547

.609

.734

.922

.984

.188

.312

.375

.500

.625

.750

.800

1.906

2.000

2.172

2.234

.891

1.016

1.141

1.203

1.469

1.656

1.750

.812

.938

.906

1.031

1.125

1.203

1.297

1.375

1.500

.875

.930

.969

1.000

1.125

1.250

1.375

1.500

1.057

1.175

1.301

1.428

1.533

1.062

1.156

1.250

1.375

All dimensions for reference only.

31

PT01 SE (MS3121)

SP01 SE

cable connecting receptacle

S

TERMINATION ASSEMBLIES

“SE” (SR), MS / “F” Strain Relief

“SE”, MS / “E” Open Wire Seal

“SP”, MS / “P” Potting Boot

L

N

A

G

N

A

D

N

A

K

PT01SE-XX-XXX

SP01SE-XX-XXX

MS3121E-XX-XXX

PT01SE-XX-XXX (SR)

SP01SE-XX-XXX (SR)

MS3121F-XX-XXX

PT01SP-XX-XXX

SP01SP-XX-XXX

MS3121P-XX-XXX

Note: This connector style is sometimes referred to as a cable connecting “plug”.

It does, however, mate with either a straight or 90 degree plug.

To complete part number see how to order on page 39.

Receptacle

Front View

Receptacle

Side View

Class “SE”, MS / “E”

Class “SE” (SR), MS / “F”

Class “SP”, MS / “P”

A Dia.

+.001

–.005

N

Dia.

Max.

N

Dia.

Max.

Shell

Size

S

Max.

K

±.018

L

Max.

G

Dia.

L

Max.

N

Max.

D

Dia.

L

Max.

8

10

12

14

16

18

20

22

24

.812

.955

.473

.590

.094

.115

1.522

1.709

.560

.685

.125

.188

.312

.375

.500

.625

.750

.800

2.422

2.537

2.824

2.900

.828

.891

–

.444

.558

.683

.808

.909

1.034

1.159

1.284

1.656

1.750

1.782

.734

1.048

1.142

1.236

1.329

1.455

1.579

1.709

.750

.813

1.016

1.141

1.203

1.469

1.656

1.750

.858

.875

.930

.984

1.000

1.125

1.250

1.375

1.500

1.057

1.175

1.301

1.428

1.555

1.110

1.234

1.360

1.484

1.610

All dimensions for reference only.

32

PT02 SE (MS3122)

SP02 SE

box mounting receptacle

S

L

R

M

(TP)

K

R

S

A

N

(TP)

T Dia.

4 Holes

D

PT02SE-XX-XXX

SP02SE-XX-XXX

MS3122E-XX-XXX

To complete part number see how to order on page 39.

(MMC) located within .0025 of (TP)

■

Receptacle Front View

Receptacle Side View

T

M

+.010

–.000

A

Dia.

+.001

N

Dia.

+.011

–.000

S

Dia.

±.005

D

Max.

R

Max.

Shell

Size

K

±.016

L

Max.

PT

SP

PT

SP

PT

SP

–

–.005

PT

SP

PT

SP

8

10

12

14

16

18

20

22

24

.594

–

.828

.954

–

.120

.147

.473

.312

.406

–

.062

.094

1.296

1.358

.431

.556

.589

–

.438

.562

.719

.812

.938

1.031

1.125

1.203

1.297

1.375

1.500

1.141

1.266

1.360

1.453

1.532

1.688

1.766

1.891

.150

.590

.219

.344

.462

.556

.589

.812

1.047

1.141

1.234

1.328

1.453

1.578

1.703

.750

.688

.906

.875

.812

.969

1.000

1.125

1.250

1.375

1.500

.938

1.062

1.156

1.250

1.375

1.062

1.188

1.312

1.438

All dimensions for reference only.

33

MF02 SE (MS3127)

box mounting receptacle

T¹ Dia.

4 Holes

S

L

R¹

(TP)

M

R

K

(TP)

R

R¹

S

A

N

(TP) (TP)

T Dia.

D

4 Holes

MF02SE-XX-XXX

MS3127E-XX-XXX

To complete part number see how to order on page 39.

(MMC) located within .0025 of (TP)

■

Receptacle Front View

Receptacle Side View

N

A

Dia.

+.011

–.000

Dia.

+.001

–.005

M

+.010

–.000

Shell

Size

S

Max.

T

T¹

±.005

D

Max.

K

±.016

L

R

R¹

±.005

Max.

1.266

1.328

10

12

14

16

18

20

22

24

.562

.688

.719

.812

.906

.969

1.062

1.156

1.250

1.375

.812

1.141

1.266

1.360

1.453

1.532

1.688

1.766

1.891

.120

.147

.150

.590

.750

.219

.344

.062

.094

.462

.556

.589

.938

.812

1.031

1.125

1.203

1.297

1.375

1.500

.875

.938

1.000

1.125

1.250

1.375

1.500

1.062

1.188

1.312

1.438

All dimensions for reference only.

34

PT06 SE (MS3126)

SP06 SE

straight plug

S

TERMINATION ASSEMBLIES

“SE” (SR), MS / “F” Strain Relief

“SE”, MS / “E” Open Wire Seal

“SP”, MS / “P” Potting Boot

L

N

G N

D N

Z pin contacts

Z¹ socket contacts

Z pin contacts

Z¹ socket contacts

Z pin contacts

Z¹ socket contacts

PT06SE-XX-XXX

SP06SE-XX-XXX

PTG06SE-XX-XXX

MS3126E-XX-XXX

PT06SE-XX-XXX (SR)

SP06SE-XX-XXX (SR)

PTG06SE-XX-XXX (SR)

MS3126F-XX-XXX

PT06SP-XX-XXX

SP06SP-XX-XXX

PTG06SP-XX-XXX

MS3126P-XX-XXX

To complete part number see how to order on page 39.

Plug

Front View

Side View

Class “SE”, MS / “E”

Class “SE” (SR), MS / “F”

Class “SP”, MS / “P”

Shell

Size

S Dia.

Max.

Z

Z¹

±.045

L

Max.

N

Max.

G

Dia.

L

Max.

N

Max.

D

Dia.

L

Max.

N Dia.

Max.

±.045

8*

10

12

14

16

18

20

22

24

.734

.859

.640

.579

1.328

1.297

1.359

.540

.685

.125

.188

.312

.375

.500

.625

.750

.800

2.413

2.528

2.753

2.830

.828

.891

.327

.444

1.750

1.766

.578

.734

1.031

1.156

1.281

1.391

1.531

1.656

1.777

.813

1.016

1.141

1.203

1.469

1.656

1.750

.558

.858

.930

.683

.984

1.057

1.175

1.301

1.428

1.533

.808

1.110

1.234

1.360

1.484

1.610

.909

1.034

1.159

1.284

* PT-SE, MS-SE and MS-SP only.

All dimensions for reference only.

35

PT07 SE (MS3124)

SP07 SE

jam nut receptacle

S

H

S

TERMINATION ASSEMBLIES

“SE” (SR), MS / “F” Strain Relief

“SE”, MS / “E” Open Wire Seal

“SP”, MS / “P” Potting Boot

L

M

K

R

K

J

N

J

F N

J

A

G N

A

R

P

R

P

PT07SE-XX-XXX

SP07SE-XX-XXX

MS3124E-XX-XXX

PT07SE-XX-XXX (SR)

SP07SE-XX-XXX (SR)

MS3124F-XX-XXX

PT07SP-XX-XXX

SP07SP-XX-XXX

MS3124P-XX-XXX

To complete part number see how to order on page 39.

All lockwire holes are .044 Dia. Min.

Receptacle Front

View

Receptacle Side View

P

A Dia.

+.001

–.005

J Flat

+.000

–.010

K

+.011

–.010

R

Panel Thickness

Shell

Size

H Hex

Max.

S

Max.

M

±.005

Thread

Class 2A

Min.

.062

Max.

.125

.250

8

10

12

14

16

18

20

22

24

.767

.892

.954

1.078

1.266

1.391

1.516

1.641

1.828

1.954

2.078

.473

.590

.530

.655

.125

.156

.696

.884

.917

.5625-24 UNEF

.6875-24 NEF

1.079

1.205

1.329

1.455

1.579

1.705

1.829

.750

.818

.8750-20 UNEF

1.0000-20 UNEF

1.1250-18 NEF

1.2500-18 NEF

1.3750-18 NEF

1.5000-18 NEF

1.6250-18 NEF

.875

.942

1.000

1.125

1.250

1.375

1.500

1.066

1.191

1.316

1.441

1.566

Class “SE”, MS / “E”

Class “SE” (SR), MS / “F”

Class “SP”, MS /”P”

Shell

Size

L

Max.

N

Max.

F

Min.

G Dia.

Free

L

Max.

N

Max.

G

Dia.

L

Max.

N Dia.

Max.

8

10

12

14

16

18

20

22

24

1.438

1.625

1.688

.749

.874

.234

.297

.422

.547

.609

.734

.922

.984

.125

.188

.312

.375

.500

.625

.750

.800

1.922

2.000

2.172

2.234

.828

.891

–

.444

.558

.683

.808

.909

1.034

1.159

1.284

1.656

1.922

1.951

.734

.858

.984

1.110

1.234

1.360

1.484

1.610

.999

1.016

1.141

1.203

1.469

1.656

1.750

1.124

1.249

1.374

1.530

1.655

1.780

All dimensions for reference only.

36

PT08 SE

SP08 SE

90 degree plug

G

TERMINATION ASSEMBLIES

“SE” Open Wire Seal, “SE” (SR) Strain Relief

“SP” Potting Boot 75 degrees

L

E

B

A

K

PT08SE-XX-XXX

SP08SE-XX-XXX

PT08SE-XX-XXX (SR)

SP08SE-XX-XXX (SR)

PT08SP-XX-XXX

SP08SP-XX-XXX

H

D

C

To complete part number see how to order on page 39.

All lockwire holes are .044 Dia. Min.

Plug

Front View

Side View

Class “SE”, “SE” (SR)

Class “SP”

H

G

C

E

Shell

Size

Dia.

Max.

B

±.031

+.010

–.025

D

±.062

+.047

–.025

L

Max.

A

±.025

K

L

Max.

±.015

.438

.516

.625

.656

.703

.766

.812

.918

±.015

10

12

14

16

18

20

22

24

.921

1.046

1.171

1.297

1.422

1.562

1.672

1.797

.749

.812

.170

.264

.310

.330

.444

.510

.515

.656

1.191

1.254

1.316

1.562

1.625

1.719

1.750

.393

.450

.519

.583

.621

.683

.739

.787

2.137

2.222

2.370

2.572

2.680

2.753

2.799

3.037

.547

.625

.734

.750

.781

.859

.906

1.181

.562

2.031

2.093

2.203

2.250

2.296

2.343

2.390

2.624

.688

.905

.781

1.030

1.015

1.077

1.139

1.250

.890

1.000

1.125

1.234

1.374

All dimensions for reference only.

37

PT-SE Bre akaway

twist pull plug

4.500 ±.250

The PT-SE miniature breakaway connector has the following

design features:

L

J

D

• crimp front release, front removable contacts in “SE” spring

tower retention system

• 3 styles available: potted termination, environmental style

and environment style with a strain relief

SOCKET

INSERT

C

INSERT

• instant decoupling of plug and receptacle with an axial

pull on the lanyard when they are fully mated

• intermateable with standard receptacles

B

• operating voltage to 900 VAC (RMS) at sea level

• quick positive bayonet coupling and 5 key/keyway polarization

LANYARD PULLED TAUT

AGAINST A .200 ±.031 DIA MANDREL

A

Breakaway PT-SE with Crimp Contacts,

Environmental

4.500 ±.250

5.000 ±.250

L

L2

1

71-3455XX-(

72-3455XX-(

)

J

D

SOCKET

INSERT

SOCKET

INSERT

C

INSERT

H

F

Breakaway PT-SE with Crimp Contacts,

Potted Termination

Breakaway PT-SE with Crimp Contacts,

Environmental with Strain Relief

71-4196XX-(

72-4196XX-(

)

71-2511XX-(

72-2511XX-(

)

Part

Number*

Part

Number*

Part

Number*

Shell

Size

A Dia.

Max.

B

Max.

C +.020 D +.020

F Dia.

±.016

H Dia.

±.016

J

L

Max.

L₁

Max.

L₂

Max.

–.000

.030

.092

–.000

.337

.399

±.010

71-419646

71-419647

71-419648

71-419649

71-419650

71-419651

71-419652

71-419653

71-251181

71-251182

71-251183

71-251184

71-251185

71-251186

71-251187

71-251188

71-345510

71-345512

71-345514

71-345516

71-345518

71-345520

71-345522

71-345524

10

12

14

16

18

20

22

24

1.125

1.281

1.438

1.562

1.718

1.875

2.031

2.156

1.125

1.406

1.562

1.688

1.844

2.000

2.188

2.312

.188

.312

.375

.500

.625

.750

.800

.444

.558

.353

.415

1.875

1.906

1.969

2.000

2.281

2.344

2.406

2.140

2.156

2.203

2.250

2.281

2.359

2.453

2.156

2.406

2.531

2.719

2.844

2.906

.683

.808

.909

1.034

1.159

1.284

All dimensions for reference only.

* See Finish information below to determine prefix 71 or 72 in part number.

Drawing above shows standard lanyard length.

Order by Amphenol Propriety number as follows (example part number shown):

71 -

4196 50

-

32

P

1

2

3

4

5

1. Finish

“71” designates corrosion resistant olive drab cadmium plate

“72” designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 hr.

extended salt spray.

2. Connector Type Identification

4196XX designates PT-SE plug, crimp, potted termination style

2511XX designates PT-SE plug, crimp, environmental with strain relief style

3455XX designates PT-SE plug, crimp, environmental

3. Shell Size

See part number columns in chart above for 2 digit number at end that correlates to the shell size. Example: ‘50’ correlates to shell size 18.

4. Insert Arrangement Number

See insert availability for Miniature Breakaway connectors on page 6. The number following the hyphen is the insert arrangement number.

5. Contact Type/Alternate Insert Rotation

Pin Contacts

Amphenol Equates to Amphenol Equates to

Socket Contacts

P designates pin, S designates socket for normal positioning of inserts. When an

alternate position of the insert is required to prevent cross-mating a different letter

(other than P or S) is used. See page 7 for description of alternate positions; then con-

vert to Amphenol proprietary coding by the chart at right to complete the part number.

Letter

G

I

MS letter

PW

PX

Letter

H

J

MS letter

SW

SX

K

M

PY

PZ

L

N

SY

SZ

38

PT-SE, SP-SE, MS/PT-SE

how to order

PT-SE, SP-SE

MS/PT-SE

MIL-C-26482, Series 1

To more easily illustrate ordering procedure, part number

MS3120E20-41PW is shown as follows:

To more easily illustrate ordering procedure, part number PT00SE-20-

41PW(SR) is shown as follows:

PT

00

SE - 20

-

41

P

W

(SR)

MS

312

0

E

20 – 41

P

W

1

2

3

4

5

6

7

8

See code below:

1

2

3

4

5

6

7

8

1. Connector Type

See code below:

“PT” designates standard olive drab, electrically conductive cadmium

plated, bayonet lock connector with crimp contacts

“MF” designates standard olive drab, electrically conductive cadmium

plated, bayonet lock connector with dual mounting holes, and

crimp contacts

“SP” designates electrically non-conductive, hard anodic coated,

bayonet lock connector with larger flange and mounting holes

for back panel mounting, and crimp contacts

1. “MS” designates Military Standard

2. Specification Number

“312” designates basic family for MIL-C-26482, Series 1

crimp type

3. Shell Style

“0”

“1”

“2”

“4”

“6”

“7”

designates wall mounting receptacle

designates cable connecting receptacle*

designates box mounting receptacle

designates jam nut receptacle

designates straight plug

“PTG” designates plug with grounding fingers

2. Shell Style

“00”

“01”

“02”

“06”

“07”

“08”

designates wall mounting receptacle

designates cable connecting receptacle*

designates box mounting receptacle

designates straight plug

designates jam nut receptacle

designates 90 degree plug

designates box mounting receptacle with dual

mounting holes

“8”

designates wall mounting receptacle with dual

mounting holes

4. Service Class

“E”

“F”

designates environmental resisting connector

designates environmental resisting connector with

strain relief

3. Service Classes

“SE” designates environmental crimp

“SP” designates potted type crimp

Both of the above are Amphenol proprietary versions of the MIL-C-

26482, Series 1 crimp contact connector and offer 15 lbs. contact reten-

tion for size 20 contacts; 25 lbs. for size 16 contacts.

4. Shell Size

“20” designates shell size. Shell sizes 8 through 24 available.

5. Insert Arrangement

Refer to pages 4-11 for insert availability.

“20 - 41” designates insert arrangement. (The number following the

hyphen is the number only that is used in the part number).

6. Contacts

“P”

designates potted type with potting boot

5. Shell Size

“20” designates shell size. Shell sizes 8 through 24 available

6. Insert Arrangement

Refer to pages 4-11 for insert availability.

“20 - 41” designates insert arrangement. (The number follow-

ing the hyphen is the number only that is used in the part

number).

7. Contacts

“P” designates pin contacts

“S” designates socket contacts

8. Insert Rotation

“P” designates pin contacts

“S” designates socket contacts

7. Insert Rotation

Refer to page 7.

“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell

from the “normal” position. No letter required for normal (no

rotation) position.

Refer to page 7.

“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from “normal”

position. No letter required for normal (no rotation) position.

8. “SR” designates a strain relief clamp.

Indicate optional finishes as follows:

(003) olive drab cadmium plate (standard on “PT”)

(005) anodic coating - Alumilite^®(standard on “SP”)

(014) olive drab cadmium plate over nickel

(023) electroless nickel

*

This connector style is sometimes referred to as a cable connecting

“plug”. It does, however, mate with either a straight or 90 degree plug.

(024) olive drab zinc cobalt plating

For ordering Miniature Breakaway PT-SE Crimp connectors

see pg. 38.

(424) electroless nickel finish with strain relief

(466) olive drab zinc cobalt plating with strain relief

OR

RoHS Compliant finish suffix as follow:

(025) non-conductive black zinc cobalt plating

h

(027) conductive black zinc cobalt plating

(470) non-conductive black zinc cobalt plating with

strain relief

2

(476) conductive black zinc cobalt with strain relief

39

Amphe nol ^®PT-CE, SP-CE

bayonet coupling, crimp termination

Amphenol^®CE crimp type miniature connectors provide

performance and versatility needed for applications

demanding high reliability and crimp removable contacts.

These crimp contacts are rear insertable/front release and

are held in position by a nylon wafer retention system.

wall mounting

receptacle

The SP-CE Series is a modification of the PT-CE, providing

special shells with a wide mounting flange for back panel

mounting.

A corrosion resistant electrically conductive finish of cadmium

plate with an olive drab chromate after-treatment is used on the

PT-CE. The SP-CE is given a durable nonconductive hard

anodic “Alumilite”^®coating which provides abrasion protection

and resistance to corrosion.

cable

connecting

receptacle*

Shell components for these versions are aluminum. The

dependable 5 key/keyway polarization with bayonet lock cou-

pling assures positive mating with no chance of cross plugging.

Spring tension provided by a wave washer in the coupling nut

ensures maintenance of interfacial seal between mating halves.

Both the insert and main joint gasket are molded from resilient

neoprene. This provides excellent moisture sealing at the gas-

ket and superior electrical isolation of the contact in the insert.

box mounting

receptacle

Both pins and sockets are machined form a copper alloy and

are gold plated. This gold plating eliminates contact corrosion

and offers an indefinite shelf life. Socket contacts for these

series are a closed entry design.

Breakaway style plug is available in PT-CE crimp.

The PT-CE and SP-CE Series are intermateable and inter-

mountable with all existing Miniature Cylindrical Series connec-

tors except for the threaded coupling PC Series.

straight plug

Refer to pages 4-11 for insert arrangement availability.

*

This connector style is sometimes referred to as a cable connecting “plug.” It

does, however, mate with a straight or 90 degree plug.

jam nut

receptacle

breakaway

twist pull

plug

40

PT-CE, SP-CE

Contact Specifications

Maximum

Contact

Size

Test

Current

Millivolt

Drop†

Crimp Well

Diameter

Minimum

Well Depth

+.002

.045

20

16

7.5

55

49

.359

.234

–.001

+.004

.063

13.0

–.001

“CE”

open wire seal

Service Rating

Recommended

Operating

Test Voltage AC (RMS), 60 cps

Service

Rating

AC Voltage

at Sea Level

Sea

Level

50,000 70,000 110,000

ft.

I

600

1,500

2,300

500

750

375

500

200

II

1,000

†

Silver plated wire per MIL-C-26482

PT-CE, and SP-CE Service Classes

PT-CE and SP-CE Connectors are available in the

three service classes listed below.

“CE” (SR)

strain relief

“CE”

Open wire sealing – environmental resistant,

with a nut and grommet for moisture proof-

ing individual wires.

“CE” (SR)Strain relief clamp – environmental resistant

strain relief clamp and grommet for moisture

proofing individual wires; provides added

wire bundle support.

“CP”

Translucent nylon boot for retaining cus-

tomer applied potting compounds; held in

place by a threaded ring.

Breakaway style - see page 48.

“CP”

potting boot

41

PT00 CE

SP00 CE

wall mounting receptacle

S

PT

.120 .005 Dia.

(.147 .005 Dia.ꢀ size 24)

R

(TP)

SP

.150 .005 Dia.

4 Holes

R

S

(TP)

TERMINATION ASSEMBLIES

“CE” (SR) Strain Relief

“CE” Open Wire Seal

“CP” Potting Boot

L

K

A

D N

N

A

G

H

A

M

PT00CE-XX-XXX

SP00CE-XX-XXX

PT00CE-XX-XXX (SR)

SP00CE-XX-XXX (SR)

PT00CP-XX-XXX

SP00CP-XX-XXX

To complete part number see how to order on page 49.

■

(MMC) located within .005 Dia. of (TP)

Receptacle Front View

Receptacle Side View

K

+.025

–.010

M

+.010

–.000

Class “CE”

N

Class “CE” (SR)

Class “CP”

A

Dia.

+.001

–.005

R

(TP)

S

±.016

N

Dia.

Max.

Shell

Size

L

Dia.

G

H

L

D

Dia.

L

Max.

PT

SP

PT

.688

SP

PT

SP

PT

SP

Max.

Dia.

Max.

6

.469

.594

.719

.812

.641

.734

.812

.953

.348 .493 .524 .431 .462 1.468

.473 .493 .524 .431 .462 1.468

.590 .493 .524 .431 .462 1.468

.750 .493 .524 .431 .462 1.468

.875 .493 .524 .431 .462 1.468

.440

–

8

.812 1.047

.938 1.125

.560 .125

.685 .188

.813 .312

.797 2.031

.859 2.031

.984 2.031

.327

.444

.558

.683

.808

.909

1.683

1.750

1.782

.608

10

12

14

16

18

20

22

24

.734

.938 1.031 1.250

.858

.906 1.031 1.125 1.344

.930 .375 1.109 2.031

.984

.969 1.125 1.219 1.438 1.000 .493 .524 .431 .462 1.468 1.057 .500 1.172 2.156

1.062 1.203 1.312 1.516 1.125 .493 .524 .431 .462 1.468 1.175 .625 1.422 2.156

1.110

1.234

1.360

1.484

1.610

1.156 1.297 1.438 1.672 1.250 .650 .650 .556 .556 1.562 1.301 .625 1.422 2.266 1.034

1.250 1.375 1.562 1.750 1.375 .650 .650 .556 .556 1.562 1.428 .750 1.609 2.266 1.159

1.375 1.500 1.688 1.875 1.500 .683 .683 .589 .589 1.625 1.555 .800 1.703 2.328 1.284

All dimensions for reference only.

42

PT01 CE

cable connecting receptacle

S

TERMINATION ASSEMBLIES

“CE” (SR) Strain Relief

“CE” Open Wire Seal

“CP” Potting Boot

L

A

D H

N

A

G

H

A

K

PT01CE-XX-XXX

SP01CE-XX-XXX

PT01CE-XX-XXX (SR)

SP01CE-XX-XXX (SR)

PT01CP-XX-XXX

Note:This connector style is sometimes referred to as a cable connecting

“plug”. It does, however, mate with either a straight or 90 degree plug.

To complete part number see how to order on page 49.

Receptacle

Front View

Receptacle

Side View

Class “CE”

A Dia.

Class “CE” (SR)

H

Class “CP”

Shell

Size

S

±.016

+.001

–.005

K

±.016

L

Max.

N

Dia.

G

Dia.

L

Max.

D Dia.

Min.

L

Max.

N Dia.

Max.

Dia.

6

8

.688

.812

.348

.473

.094

.115

1.468

1.562

1.625

.440

.560

–

.125

.188

.312

.375

.500

.625

.750

.800

.797

1.982

2.114

2.207

2.219

.327

.444

.558

.683

.808

.909

1.034

1.159

1.284

1.702

1.796

1.827

.608

10

12

14

16

18

20

22

24

.938

.590

.685

.859

.734

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.750

.813

.984

.858

.875

.930

1.109

1.172

1.422

1.609

1.703

.984

1.000

1.125

1.250

1.375

1.500

1.057

1.175

1.301

1.428

1.555

1.110

1.234

1.360

1.484

1.610

All dimensions for reference only.

43

PT02 CE

SP02 CE

box mounting receptacle

L

S

M

R

(TP)

R

S

A

H N

(TP)

T Dia.

4 Holes

D

K

PT02CE-XX-XXX

SP02CE-XX-XXX

PT02CP-XX-XXX

SP02CP-XX-XXX

To complete part number see how to order on page 49.

(MMC) located within .005 of (TP)

■

Receptacle Front View

Receptacle Side View

T

K

+.025

–.010

M

+.010

–.000

A

Dia

+.001

S

±.016

Dia.

±.005

H

Dia.

N

Dia.

Max.

R

D

Shell

L

Size

PT

SP

PT

SP

PT

SP

–.005

PT

SP

Max.

PT

SP

Max.

PT

SP

8

.594

.734

.812

.938

1.047

1.125

1.250

1.344

1.438

1.516

1.672

1.750

1.875

.120

.147

.150

.473

.344

.406

.436

.312

.406

.436

.317

.441

.493

.650

.683

.524

.650

.683

1.250 .431

1.312 .556

1.312 .589

.462

.556

.589

.449

.573

10

12

14

16

18

20

22

24

.719

.812

.590

.812

.938

1.031

1.125

1.219

1.312

1.438

1.562

1.688

.750

.566

.699

.906

1.031

1.125

1.203

1.297

1.375

1.500

.875

.683

.823

.969

1.000

1.125

1.250

1.375

1.500

.808

.949

1.062

1.156

1.250

1.375

.899

1.073

1.199

1.323

1.449

1.034

1.155

1.279

All dimensions for reference only.

44

PT06 CE

SP06 CE

straight plug

S

TERMINATION ASSEMBLIES

“CE” (SR) Strain Relief

“CE” Open Wire Seal

“CP” Potting Boot

L

N

G N

D N

Z pin contacts

Z¹ socket contacts

Z pin contacts

Z¹ socket contacts

Z pin contacts

Z¹ socket contacts

PT06CE-XX-XXX

SP06CE-XX-XXX

PT06CE-XX-XXX (SR)

SP06CE-XX-XXX (SR)

PT06CP-XX-XXX

SP06CP-XX-XXX

To complete part number see how to order on page 49.

Plug

Front View

Side View

Class “CE”

Class “CE” (SR)

Class “CP”

S

Z

Z¹

Shell

Size

Dia.

Max.

+.035

–.040

+.035

–.040

L

N

Dia.

G

Dia.

H

Max.

L

Max.

D

Dia.

L

Max.

N Dia.

Max.

1.457

1.487

1.550

6

8

.609

.734

.772

.710

.631

.569

.440

.560

–

.125

.188

.312

.375

.500

.625

.750

.800

.797

2.019

2.144

2.175

2.237

.327

.444

.558

.683

.808

.909

1.034

1.159

1.284

1.707

1.832

.608

10

12

14

16

18

20

22

24

.844

.685

.859

.734

1.016

1.141

1.266

1.375

1.516

1.641

1.761

.813

.984

.858

.930

1.109

1.172

1.422

1.609

1.703

.984

1.057

1.175

1.301

1.428

1.555

1.110

1.234

1.360

1.484

1.610

All dimensions for reference only.

45

PT07 CE

SP07 CE

jam nut receptacle

S

H

S

TERMINATION ASSEMBLIES

“CE” (SR) Strain Relief

“CE” Open Wire Seal

“CP” Potting Boot

M

K

L

M

K

L

M

L

K

R

A

R

G N

D N

J

N

J

A

P

PT07CE-XX-XXX

SP07CE-XX-XXX

PT07CE-XX-XXX (SR)

SP07CE-XX-XXX (SR)

PT07CP-XX-XX

SP07CP-XX-XXX

To complete part number see how to order on page 49.

All lockwire holes are .044 Dia. Min.

Receptacle

Front View

Receptacle

Side View

Panel Thickness

Class “CE”

Class “CE” (SR)

Class “CP”

H

A

J

Hex.

+.017

–.016

Dia.

+.001

–.005

Flat

+.000

–.010

D

Dia.

Min.

N

Dia.

Max.

Shell

Size

S

±.016

K

±.016

M

±.005

L

Max.

N

Max.

G

Dia.

L

Max.

N

Max.

L

Max.

Min.

.062

Max.

.125

.250

8

10

12

14

16

18

20

22

24

.750

.875

.938

1.062

1.250

1.375

1.500

1.625

1.812

1.938

2.062

.473

.590

.530

.655

.125

.156

.696

.884

.917

.827

.733

.762

.730

.855

.125

.188

.312

.375

.500

.625

.750

.800

1.297

.797

.859

.984

.327

.444

.875

.969

.608

.734

1.062

1.188

1.312

1.438

1.562

1.688

1.812

.750

.818

.980

.558

.858

.875

.942

1.105

1.230

1.355

1.511

1.636

1.761

1.297 1.109

1.422 1.172

1.422 1.422

1.328 1.422

1.328 1.609

1.422 1.703

.683

.984

1.000

1.125

1.250

1.375

1.500

1.066

1.191

1.316

1.441

1.566

.808

1.110

1.234

1.360

1.484

1.610

.909

1.034

1.159

1.284

All dimensions for reference only.

46

PT08 CE

SP08 CE

90 degree plug

G

TERMINATION ASSEMBLIES

“CE” Open Wire Seal, “CE” (SR) Strain Relief

“CP” Potting Boot 75°

L

E

B

A

K

PT08CE-XX-XXX

SP08CE-XX-XXX

PT08CE-XX-XXX (SR)

SP08CE-XX-XXX (SR)

PT08CP-XX-XXX

SP08CP-XX-XXX

H

D

C

To complete part number see how to order on page 49.

All lockwire holes are .044 Dia. Min.

Plug

Front View

Side View

Class “CE”, “CE” (SR)

Class “CP”

G

C

E

Shell

Size

Dia.

Max.

B

±.031

+.010

–.025

D

±.062

+.047

–.025

L

A

±.025

H

±.015

K

±.015

L

±.057

Max.

1.906

2.031

2.093

2.203

2.250

2.296

2.343

2.390

2.624

8

10

12

14

16

18

20

22

24

.796

.921

.655

.749

.169

.170

.264

.310

.330

.444

.510

.515

.656

.941

1.191

1.254

1.316

1.562

1.625

1.719

1.751

.339

.393

.450

.519

.583

.621

.683

.739

.797

1.986

2.080

2.165

2.313

2.515

2.623

2.739

2.785

3.024

.469

.547

.625

.734

.750

.781

.859

.906

1.169

.312

.438

.516

.625

.656

.703

.766

.812

.918

.438

.562

1.046

1.171

1.297

1.422

1.562

1.672

1.797

.812

.688

.905

.781

1.030

1.015

1.077

1.139

1.265

.890

1.000

1.125

1.234

1.374

All dimensions for reference only.

47

PT-CE Bre akaway

twist pull plug

6.000 ± .250

The PT-CE miniature breakaway connector has the

following design features:

L

J

+.010

.016

• crimp front release, front removable contacts in

“CE” nylon wafer retention system

–.025

SOCKET INSERT

+.010

–.025

PIN INSERT

.328

• 2 styles available: potted termination and environ-

ment style with a strain relief

• instant decoupling of plug and receptacle with an

axial pull on the lanyard when they are fully

mated

H

B

• intermateable with standard receptacles

• operating voltage to 900 VAC (RMS) at sea level

• quick positive bayonet coupling and 5 key/key-

way polarization

A

LANYARD PULLED TAUT

AGAINST A .200 ± .031 DIA. MANDREL

Breakaway PT-CE with Crimp Contacts,

Potted Termination

71-2512XX-(

72-2512XX-(

)

6.000 ± .250

L

1

J

+.010

–.025

SOCKET INSERT

.016

A

Dia.

Max.

F

Dia.

H

Dia.

Part

Number*

Part

Number*

Shell

Size

B

Max.

J

L

Max.

L₁

Max.

.328

±.016 ±.016 ±.010

+.010

–.025

71-251209 71-339508

71-251210 71-339510

71-251211 71-339512

71-251212 71-339514

71-251213 71-339516

71-251214 71-339518

71-251215 71-339520

71-251216 71-339522

71-251217 71-339524

8

.875

.984

.125

.188

.312

.375

.500

.625

.327

.444

.558

.683

.808

.909

.353 1.937 2.937

.353 1.890 2.937

.353 1.906 3.000

.353 1.953 3.000

.353 2.000 3.187

.353 2.031 3.375

.415 2.234 3.375

.415 2.328 3.375

.415 2.359 3.625

10 1.125 1.125

12 1.281 1.406

14 1.438 1.562

16 1.562 1.688

18 1.718 1.844

20 1.875 2.000

22 2.031 2.188

24 2.156 2.312

INSERT

F

.625 1.034

.750 1.159

.800 1.284

Breakaway PT-CE with Crimp Contacts,

Environmental with Strain Relief

71-3395XX-(

72-3395XX-(

)

All dimensions for reference only.

* See Finish information below to determine prefix 71 or 72 in part number.

Drawing above shows standard lanyard length.

Order by Amphenol Propriety number as follows (example part number shown):

71 -

2512 50

-

32

P

1

2

3

4

5

1. Finish

“71” designates corrosion resistant olive drab cadmium plate

“72” designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 hr.

extended salt spray.

2. Connector Type Identification

2512XX designates PT-CE plug, crimp, potted termination style

3395XX designates PT-CE plug, crimp, environmental with strain relief style

3. Shell Size

See part number columns in chart above for 2 digit number at end that correlates to the shell size. Example: ‘50’ correlates to shell size 18.

4. Insert Arrangement Number

See insert availability for Miniature Breakaway connectors on page 6. The number

following the hyphen is the insert arrangement number.

Pin Contacts

Amphenol Equates to Amphenol Equates to

Socket Contacts

5. Contact Type/Alternate Insert Rotation

Letter

G

I

K

M

MS letter

PW

PX

PY

PZ

Letter

H

J

L

N

MS letter

SW

SX

SY

SZ

P designates pin, S designates socket for normal positioning of inserts. When an

alternate position of the insert is required to prevent cross-mating a different letter

(other than P or S) is used. See page 7 for description of alternate positions; then

convert to Amphenol proprietary coding by the chart at right to complete the part

number.

48

PT-CE, SP-CE

how to order

PT-CE, SP-CE

To more easily illustrate ordering procedure, part number

PT00CE-20-41PW (SR) is shown as follows:

PT

1

00 CE – 20 – 41

P

6

W

7

(SR)

8

2

3

4

5

See code below:

1. Connector Type

“PT” designates standard electrically conductive olive drab cadmium plated

bayonet lock connector with crimp contacts

“SP” designates electrically non-conductive, hard anodic coated bayonet

lock connector with large flange and mounting holes for back panel mount-

ing, and crimp contacts.

2. Shell Style

“00”

“01”

“02”

“06”

“07”

“08”

designates wall mounting receptacle

designates cable connecting receptacle*

designates box mounting receptacle

designates straight plug

designates jam nut receptacle

designates 90° plug

3. Service Class

“CE” designates environmental crimp

“CP” designates potted type crimp

Both of the above are Amphenol^®proprietary versions of the MIL-C-

26482, Series 1 crimp contact connector and offer 7 lbs. contact retention

for size 20 contacts; 9 lbs for size 16 contacts.

4. Shell Size

“20” designates shell size. Shell sizes 6 through 24 available.

5. Insert Arrangement

Refer to pages 4-11 for insert availability.

“20 – 41” designates insert arrangement. (The number following the

hyphen is the number only that is used in the part number).

6. Contacts

“P” designates pin contacts.

“S” designates socket contacts.

7. Insert Rotation

Refer to page 7.

“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “nor-

mal” position. No letter required for normal (no rotation) position.

8. “(SR)” designates strain relief clamp.

Indicate optional finishes as follows:

(003) olive drab cadmium plate (standard on “PT”)

(005) anodic coating - Alumilite^®(standard on “SP”)

(014) olive drab cadmium plate over nickel

(023) electroless nickel

(024) olive drab zinc cobalt plating

(025) non-conductive black zinc cobalt plating

(027) conductive black zinc cobalt plating

(424) electroless nickel finish with strain relief

(466) olive drab zinc cobalt plating with strain relief

(470) non-conductive black zinc cobalt plating with strain relief

(476) conductive black zinc cobalt with strain relief

* This connector style is sometimes referred to as a cable connecting “plug”.

It does, however, mate with either a straight or 90 degree plug.

For ordering Miniature Breakaway PT-CE Crimp connectors see page 48.

49

®

Amphe nol PC

threaded coupling and solder termination

Amphenol^®PC Series threaded coupling miniature cylin-

drical connectors incorporate solder contacts. The PC dou-

ble stub threaded coupling system cannot be cross

threaded, and is mechanically assisted while engaging and

disengaging.

Shell components are aluminum. Bright cadmium plating to

QQ-P-416 with a clear chromate after-treatment provides a

golden colored conductive finish. Single key/keyway polariza-

tion represents maximum simplicity in a design proven in mil-

lions of AN connectors.

wall mounting

receptacle

Both pins and sockets are machined from a copper alloy and

are gold plated. This gold plating eliminates contact corrosion

and offers an indefinite shelf life. Socket contacts for these

series are a closed entry design.

cable

connecting

receptacle*

Both the insert and main joint gasket are molded from resilient

neoprene. This provides excellent moisture sealing at the gas-

ket and superior electrical insulation of the contacts in the

insert.

The PC is intermateable and intermountable within the PC

threaded coupling series.

Refer to pages 4-11 for insert arrangement availability.

box mounting

receptacle

*

This connector style is sometimes referred to as a cable connecting “plug”.

It does, however, mate with either a straight or 90 degree plug.

PC-SE and PC-CE, which are threaded coupling and incorporate crimp

contacts, are briefly covered on pages 62 and 63. It is necessary to

contact Amphenol for ordering information on these types.

straight plug

jam nut

receptacle

50

PC

Contact Specifications

Maximum

Contact

Size

Test

Current

Millivolt

Drop†

Solder Well

Diameter

Solder

Well Depth

+.004

.046

+.031

.125

20

7.5

55

50

“A”

general duty

–.000

+.005

.078

+.031

.188

16

13.0

–.003

–.000

Service Rating

Recommended

Operating

Test Voltage AC (RMS), 60 cps

Service

Rating

AC Voltage

at Sea Level

Sea

Level

50,000 70,000 110,000

ft.

I

600

1,500

2,300

500

750

375

500

200

“E” (SR)

strain relief

II

1,000

† Silver plated wire per MIL-C-26482

PC Service Classes

PC connectors are available in the service classes

listed below. Each class except the hermetic seal

receptacle has one or more means of terminating or

supporting a cable or wire bundle.

“A”

General duty; back shell is threaded for con-

duit attachment of MS3057 cable clamp.

“E” MS / “E”

open wire seal

“A” (SR) General duty; with strain relief clamp for

cable or wire bundle support.

“C”

Pressurized receptacle; less than 1 cu. in.

per hour leakage at 30 psi over a tempera-

ture range of –65°F to +257°F in accor-

dance with BSC-C1P specification.

“E”

Environment resistant; with nut and grom-

met for moisture proofing individual wires.

“E” (SR) Environment resistant strain relief clamp and

grommet for moisture proofing individual

wires; provides added wire bundle support.

“P”, MS / “P”

potting boot

“P”

Translucent nylon boot for retaining cus-

tomer applied potting compounds; held in

place by a threaded ring.

“P” (SR) Strain relief clamp suitable for retaining cus-

tomer applied potting compounds, with pro-

vision for wire support.

“W”

cable seal

“W”

Compressing clamp and neoprene gland for

moisture proofing multi-conductor jacketed

cables. Telescoping sleeves (MS 3420A)

can be used to adapt to cables smaller than

minimum close down.

“H”*

Hermetically sealed with compression glass

inserts.

Refer to pages 57-60 for Hermetic Versions within the

PC solder series.

51

PC00

wall mounting receptacle

S

R

L

.120 .005 Dia.

4 Holes

A

M

Q

R S

K

Z

TERMINATION ASSEMBLIES

“E” Open Wire Seal

“A” General Duty/

“C” Pressurized

“A” (SR), “E” (SR), “P” (SR)

Strain Relief

“P” Potting Boot

“W” Cable Seal

L

V

N

D

G D H

N

D

N

D

N

C

.375 MIN

PC00A-XX-XXX

PC00C-XX-XXX

PC00A-XX-XXX (SR)

PC00E-XX-XXX (SR)

PC00E-XX-XXX

PC00P-XX-XXX

PC00W-XX-XXX

To complete part number see how to order on page 61.

Receptacle Side View

Receptacle

Front View

Class “A”, “C”

A

M

Q

V

Shell

R

S

Thread

Class 2A

K

L

+.000

–.010

Thread

Class 2A

Z

Max.

D

Min.

L

Max.

N

Max.

Thread

Class 2A

Size ±.005 ±.010

Max. Max.

6

8

.469

.594

.719

.688

.812

.938

.3750 DS

.5000 DS

.6250 DS

.7500 DS

.8750 DS

.490

.875

.416

.479

.3125-32 NEF

.466

.175

.297

.421

.546

.663

.787

.879

1.014

1.135

1.528

.462

.590

.717

.834

.970

.3750-32 NEF

.5000-28 UNEF

.6250-24 NEF

.7500-20 UNEF

.8750-20 UNEF

.4375-28 UNEF .466

1.528

10

12

14

16

.5625-24 NEF

.6875-24 NEF

.466

1.528

.812 1.031

.906 1.125

1.528

.8125-20 UNEF .466

.9375-20 UNEF .466

1.0625-18 UNEF .466

1.528

.969 1.219 1.0000 DS

1.528 1.088

1.528 1.216

1.588 1.332

1.588 1.460

1.0000-20 UNEF

1.1875-18 NEF

1.4375-18 NEF

18 1.062 1.312 1.1250 DS

20 1.156 1.438 1.2500 DS

22 1.250 1.562 1.3750 DS

.584 1.031

1.1875-18 NEF

1.3125-18 NEF

.527

Class “A” (SR), “E” (SR), “P” (SR)

Class “E”

Class “P”

Class “W”

D

Shell

C

D

G

H

L

N

L

N

D

L

N

L

N

Size Thread Min.

Dia.

Max.

Min.

Max.

Closed

–

Free

Max.

6

8

–

1.250

.440

.560

.685

.813

.930

.192

.317

.434

.548

.673

.798

.899

1.406

.484

.608

.734

.858

.984

–

6-32

8-32

.240

.302

.428

.552

.615

.740

.928

.125

.188

.312

.375

.500

.625

.750

.812 1.922

.875 1.922

1.000 1.922

1.125 1.922

.550 1.250

.675 1.250

.803 1.250

.920 1.250

.168

.205

.338

.416

.550

.600

.635

.670

.230

.312

.442

.539

.616

.672

.747

.846

1.680

1.823

2.015

.547

.675

.812

.940

10

12

14

16

18

20

22

1.188 2.047 1.047 1.250 1.057

1.438 2.078 1.165 1.250 1.175

1.406 1.110

1.406 1.234

1.562 1.360

1.562 1.484

2.231 1.067

2.461 1.194

2.835 1.322

2.999 1.449

1.438 2.344 1.290 1.434 1.301 1.024

1.719 2.344 1.418 1.434 1.430 1.149

All dimensions for reference only.

52

PC01

cable connecting receptacle

L

S

A

Q

Z

TERMINATION ASSEMBLIES

“A” General Duty

“A” (SR), “E” (SR), “P” (SR)

Strain Relief

“E” Open Wire Seal

“P” Potting Boot

“W” Cable Seal

L

V

N

D

G D H

N

D

N

D

N

C

.375 MIN

PC01A-XX-XXX

PC01A-XX-XXX (SR)

PC01E-XX-XXX (SR)

PC01P-XX-XXX (SR)

PC01E-XX-XXX

PC01P-XX-XXX

PC01W-XX-XXX

Note: This connector style is sometimes referred to as a cable connecting “plug”.

It does, however, mate with either a straight or 90 degree plug.

To complete part number see how to order on page 61.

Recept.

Front View

Receptacle

Side View

Class “E”

A

Q

V

Shell

Size

S

Max.

Thread

Class 2A

L

Max.

Thread

Class 2A

Z

Max.

D

L

N

Max.

Thread

Class 2A

Min.

.175

.297

.421

.546

.663

.787

.879

1.014

1.135

Max.

1.518

1.578

6

8

.442

.570

.3750 DS

.5000 DS

.6250 DS

.7500 DS

.8750 DS

1.0000 DS

1.1250 DS

1.2500 DS

1.3750 DS

.875

1.031

.3125-32 NEF

.4375-28 UNEF

.5625-24 NEF

.6875-24 NEF

.8125-20 UNEF

.9375-20 UNEF

1.0625-18 NEF

1.1875-18 NEF

1.3125-18 NEF

.924

1.081

.462

.590

.3750-32 NEF

.5000-28 UNEF

.6250-24 NEF

10

12

14

16

18

20

22

.697

.717

.814

.834

.7500-20 UNEF

.8750-20 UNEF

1.0000-20 UNEF

1.1875-18 NEF

1.4375-18 NEF

.950

.970

1.068

1.196

1.312

1.440

1.088

1.216

1.332

1.460

Class “A” (SR), “E” (SR), “P” (SR)

Class “E”

Class “P”

Class “W”

L

D

Shell

C

D

G

H

L

N

L

N

D

L

N

Size Thread Min.

Dia.

Max.

.440

.560

.685

.813

.930

Min.

Max.

Max. Closed Free

Max.

6

8

–

1.250

.192 1.406

.317 1.406

.434 1.406

.548 1.406

.673 1.406

.484

.608

.734

.858

.984

–

6-32

8-32

.240

.302

.428

.552

.615

.740

.928

.125

.188

.812

.875

1.922

2.047

2.078

2.344

.550

.168

.205

.338

.416

.550

.600

.635

.670

.230

.312

.442

.539

.616

.672

.747

.846

1.680

1.823

2.015

2.231

2.461

2.835

2.999

.547

.675

.812

.940

1.067

1.194

1.322

1.449

10

12

14

16

18

20

22

.675

.312 1.000

.375 1.125

.500 1.188

.625 1.438

.750 1.719

.803

.920

1.047

1.165

1.290

1.418

1.250 1.057

1.250 1.175

.798 1.406 1.110

.899 1.406 1.234

1.434 1.301 1.024 1.562 1.360

1.434 1.430 1.149 1.562 1.484

All dimensions for reference only.

53

PC02

box mounting receptacle

L

S

R

.120 .005 Dia.

4 Holes

A

M

R S

N

K

Z

PC02A-XX-XXX

* PC02C-XX-XXX

* PC02E-XX-XXX

* PC02P-XX-XXX

To complete part number see how to order on page 61.

* The PC02 Box Mounting Receptacle is made only to complete a series and no provision

is made for accessories or potting on the rear skirt.

Receptacle

Front View

Receptacle

Side View

A

K

M

Shell

Size

R

±.005

S

±.010

Thread

Class 2A

+.020

–.010

L

Max.

+.010

–.000

N

Max.

Z

Max.

6

8

.469

.688

.812

.3750 DS

.5000 DS

.6250 DS

.7500 DS

.8750 DS

1.0000 DS

1.1250 DS

1.2500 DS

1.3750 DS

.469

.562

.801

.988

.406

.469

.323

.466

.527

.594

.449

10

12

14

16

18

20

22

.719

.938

.573

.812

1.031

1.125

1.219

1.312

1.438

1.562

.699

.906

.823

.969

.949

1.062

1.156

1.250

1.073

1.199

1.323

All dimensions for reference only.

54

PC06

straight plug

.333 MAX

A

Z

S

Q

L

TERMINATION ASSEMBLIES

“A” General Duty

“A” (SR), “E” (SR), “P” (SR) Strain Relief

“E” Open Wire Seal

“P” Potting Boot

“W” Cable Seal

L

V

N

D

G D H

N

D

N

D

N

C

.375 MIN

PC06A-XX-XXX

PC06A-XX-XXX (SR)

PC06E-XX-XXX (SR)

PC06P-XX-XXX (SR)

PC06E-XX-XXX

PC06P-XX-XXX

PC06W-XX-XXX

To complete part number see how to order on page 61.

Plug Front

View

Plug

Side View

Class “A”

A

Q

V

Shell

Size

S

Max.

Thread

Class 2B

L

Max.

Thread

Class 2A

Z

Max.

D

L

Max.

N

Max.

Thread

Class 2A

Min.

.175

.297

.421

.546

.663

.787

.879

1.014

1.135

6

8

.604

.729

.3750 DS

.5000 DS

.6250 DS

.7500 DS

.8750 DS

1.0000 DS

1.1250 DS

1.2500 DS

1.3750 DS

.875

1.031

.3125-32 NEF

.4375-28 UNEF

.5625-24 NEF

.6875-24 NEF

.8125-20 UNEF

.9375-20 UNEF

1.0625-18 UNEF

1.1875-18 NEF

1.3125-18 NEF

.627

.783

1.534

1.613

.462

.590

.3750-32 NEF

.5000-28 UNEF

.6250-24 NEF

.7500-20 UNEF

.8750-20 UNEF

10

12

14

16

18

20

22

.854

.717

.979

.834

1.104

1.229

1.354

1.478

1.604

.972

1.088

1.216

1.332

1.460

1.0000-20 UNEF

1.1875-18 NEF

1.4375-18 NEF

Class “A” (SR), “E” (SR), “P” (SR)

Class “E”

Class “P”

Class “W”

D

Shell

C

D

G

H

L

N

L

N

D

L

N

L

N

Size Thread Min.

Dia.

Max.

Min.

Max.

Closed Free

Max.

6

8

–

1.250

.440

.560

.685

.813

.930

.192 1.406

.317 1.406

.434 1.406

.548 1.406

.673 1.406

.484

.608

.734

.858

.984

–

6-32

8-32

.240 .125

.302 .188

.812 1.906

.875 1.906

.550

.675

.803

.920

.168

.205

.338

.416

.550

.600

.635

.670

.230

.312

.442

.539

.616

.672

.747

.846

1.680

1.823

2.015

.547

.675

.812

.940

10

12

14

16

18

20

22

.428 .312 1.000 1.906

.552 .375 1.125 1.906

.615 .500 1.188 2.047 1.047

.740 .625 1.438 2.078 1.165

.740 .625 1.438 2.250 1.290

.928 .750 1.719 2.250 1.418

1.250 1.057

1.250 1.175

.798 1.406 1.110

.899 1.406 1.234

2.231 1.067

2.461 1.194

2.835 1.322

2.999 1.449

1.434 1.301 1.024 1.562 1.360

1.434 1.430 1.149 1.562 1.484

All dimensions for reference only

55

PC07

jam nut receptacle

S

H

F

M

P

Z

F

“A” General Duty/

“C” Pressurized Receptacle

PC07A-XX-XXX

S

PC07C-XX-XXX

A

R

K

TERMINATION ASSEMBLIES

“A” (SR), “E” (SR) Strain Relief

“E” Open Wire Seal

“P” Potting Boot

M

Z

M

Z

M

Z

D

N

G D H

A

R

A

R

A

R

P

L

P

L

P

L

PC07P-XX-XXX

PC07E-XX-XXX

PC07A-XX-XXX (SR)

PC07E-XX-XXX (SR)

To complete part number see how to order on page 61.

Receptacle Side View

Class “A”, “C”

Receptacle Front View

P

H

Hex

±.016

A

K

+.016

–.010

R

Panel Thickness

Shell

Size

F

S

±.010

Thread

M

±.010

Thread

Class 2A

Z

±.010

Class 2A

.3750 DS

.5000 DS

.6250 DS

.7500 DS

.8750 DS

1.0000 DS

1.1250 DS

1.2500 DS

1.3750 DS

Min.

.062

Max.

.125

.250

Max.

.232

.262

6

8

.286

.331

.375

.442

.486

.530

.573

.641

.685

.625

.750

.812

.938

.125

.156

.671

.797

.4375-28 UNEF

.5625-24 NEF

.6875-24 NEF

.8750-20 UNEF

1.0000-20 UNEF

1.1250-18 NEF

1.2500-18 NEF

1.3750-18 NEF

1.5000-18 NEF

10

12

14

16

18

20

22

.875

1.062

1.250

1.375

1.500

1.625

1.812

1.938

1.062

1.188

1.312

1.438

1.562

1.688

Class “E”

Class “A” (SR), “E” (SR)

Class “P”

Shell

Size

L

Max.

N

Max.

C

G

Dia.

H

Max.

L

Max.

P

Min.

D

L

Max.

N

Max.

Thread

Min.

.192

.317

.434

.548

.673

.798

.899

1.024

1.149

6

8

.692

.754

.605

.730

–

.665

.790

.484

.608

6-32

8-32

.125

.188

.312

.375

.500

.625

.750

.812

1.096

1.228

1.291

.240

.302

.428

.552

.651

.740

.928

10

12

14

16

18

20

22

.855

.875

.734

.980

1.000

1.125

1.188

1.438

1.625

.858

1.105

1.230

1.355

1.511

1.636

.984

1.110

1.234

1.360

1.484

All dimensions for reference only

56

PC

hermetic

Three shell styles are available in the hermetic PC threaded

series:

•

PCIH

PC02H

PC07H

These hermetic connectors are available with solder cup or flat

eyelet pin contacts. Socket contacts are available in some ver-

sions. Other design characteristics of the PC hermetic connec-

tor series are as follows:

solder

mounting

receptacle

Shell Size: 6 thru 22. (tin plated)

Contact count: 2 through 65. Refer to pages 4 and 5 for insert

availability for hermetics.

Current: 5.0 amp, each #20 contact;

10 amp, each #16 contact;

17 amp, each #12 contact.

Contacts: Fabricated from high nickel alloy and tin plated.

Dielectric Withstanding Voltage (sea level):

1500 volts (RMS) 60 cps Service Rating I;

2300 volts (RMS) 60 cps Service Rating II.

Compression glass inserts, permanently lettered.

Helium Leakage: Less than 1.0 X 10^-6cc/sec.

at 15 psi differential.

box

mounting

receptacle

Physical Shock: 100 G’s.

Vibration: Exceeds MIL-E-5272 Procedure II.

Thermal Shock: No deterioration or failure after

5 cycles at –55°F to +257°F.

Refer to pages 4-11 for insert arrangement availability.

jam nut

receptacle

57

PC

IH

hermetic solder mounting receptacle

L

S

A

W

N

Z

.031 +.006

–.005

* PCIH-XX-XXX

** PCIY-XX-XXX

To complete part number see how to order on page 61.

* Solder cup pin contacts without interfacial seal.

** Solder cup pin contacts with interfacial seal

Receptacle

Front View

Receptacle

Side View

N

S

A

L

Dia.

W

Shell

Size

Dia.

Max.

Thread

Class 2A

+.025

–.016

+.000

–.005

+.011

–.010

Z

Max.

6

8

.511

.636

.3750 DS

.5000 DS

.6250 DS

.7500 DS

.8750 DS

1.0000 DS

1.1250 DS

1.2500 DS

1.3750 DS

.422

.438

.562

.094

.125

.387

.418

10

12

14

16

18

20

22

.761

.672

.855

.781

.980

.906

1.105

1.229

1.323

1.439

1.031

1.156

1.250

1.375

All dimensions for reference only.

58

PC02H

hermetic box mounting receptacle

L

A

S

R

.120 .005 Dia.

4 Holes

K

N

R S

Z

T

* PC02H-XX-XXX

** PC02Y-XX-XXX

To complete part number see how to order on page 61.

* Solder cup pin contacts without interfacial seal.

** Solder cup pin contacts with interfacial seal

Receptacle Front

View

Receptacle Side View

N

A

L

Dia.

+.000

–.005

Shell

Size

R

±.005

S

±.010

Thread

Class 2A

K

±.016

+.010

–.000

T

Z

Max.

±.010

.062

6

8

.469

.594

.688

.812

.3750 DS

.5000 DS

.6250 DS

.7500 DS

.8750 DS

1.0000 DS

1.1250 DS

1.2500 DS

1.3750 DS

.047

.078

.469

.438

.562

.344

.377

10

12

14

16

18

20

22

.719

.938

.672

.812

1.031

1.125

1.219

1.312

1.438

1.562

.781

.906

.969

1.031

1.156

1.250

1.375

1.062

1.156

1.250

All dimensions for reference only.

59

PC07H

hermetic jam nut receptacle

M

S

F

Z

P

F

S

A

R

K

H

* PC07H-XX-XXX

** PC07Y-XX-XXX

To complete part number see how to order on page 61.

* Solder cup pin contacts without interfacial seal.

** Solder cup pin contacts with interfacial seal

Receptacle Front View

H

Receptacle Side View

Panel

Thickness

A

K

+.000

–.016

R

Shell

Size

F

Hex.

S

Thread

Class 2A

M

±.020

Thread

Class 2A

Z

+.010

±.016

+.010

Min

.062

Max.

.125

.250

+.010

6

8

.286

.331

.375

.442

.486

.530

.573

.641

.685

.625

.750

.812

.938

.3750 DS

.5000 DS

.6250 DS

.7500 DS

.8750 DS

1.0000 DS

1.1250 DS

1.2500 DS

1.3750 DS

.094

.125

.671

.797

.4375-28 UNEF

.5625-24 NEF

.6875-24 NEF

.8750-20 UNEF

1.0000-20 UNEF

1.1250-18 NEF

1.2500-18 NEF

1.3750-18 NEF

1.5000-18 NEF

.129

.034

10

12

14

16

18

20

22

.875

1.062

1.250

1.375

1.500

1.625

1.812

1.938

1.062

1.188

1.312

1.438

1.562

1.688

All dimensions for reference only.

60

PC

how to order

PC

To more easily illustrate ordering procedure, part number

PC00A-20-41PW (SR) is shown as follows:

PC

1

00

2

A

3

– 20 – 41

P

6

W

7

(SR)

8

4

5

See code below:

1. Connector Type

“PC” designates bright cadmium plated with clear chromate after treat-

ment, threaded coupling connector with solder contacts

2. Shell Style

“00”

“01”

“02”

“06”

“07”

“I”

designates wall mounting receptacle

designates cable connecting receptacle^†

designates box mounting receptacle

designates straight plug

designates jam nut receptacle

designates solder-mount receptacle (hermetic only)

3. Service Class

“A”

“C”

“E”

designates general duty back shell

designates pressurized receptacle

designates environmental resisting open wire seal with

grommet and nut

“P”

designates potted with potting boot

“W”

designates clamp assembly for moisture proofing, multi-

jacketed cables

“H”

“Y”

designates hermetic* seal (without interfacial seal)

designates hermetic* seal (with interfacial seal)

4. Shell Size

“20”

designates shell size. Shell sizes 6 through 24 available.

5. Insert Arrangement

Refer to pages 4-11 for insert availability.

“20 – 41” designates insert arrangement. (The number following the

hyphen is the number only that is used in the part number).

6. Contacts

“P”

“S”

designates pin contacts.

designates socket contacts.

7. Insert Rotation

Refer to page 7.

“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “nor-

mal” position. No letter required for normal (no rotation) position.

8. “(SR)” designates strain relief clamp.

Indicate optional finishes as follows:

(001) bright cadmium (standard on “PC”)

(003) olive drab cadmium plate

(005) anodic coating - Alumilite^®

(011) chromate treated (Iridite 14-2)

(014) olive drab cadmium plate over nickel

(023) electroless nickel

*

Hermetic connectors are supplied with tin plated shells.

†

This connector style is sometimes referred to as a cable connecting “plug”.

It does, however, mate with either a straight or 90 degree plug.

61

®

Amphe nol PC-SE, PC-CE

threaded coupling and crimp termination

PC-SE. PC-CE

Contact Specifications

Maximum

Millivolt

Drop†

Contact

Size

Test

Current

Crimp Well

Diameter

Minimum

Well Depth

20

16

12

7.5

13.0

23.0

55

49

42

.049 ±.001

.067 ±.001

.100 ±.002

.267

.236

Service Rating

Amphenol^®PC-SE Series threaded coupling miniature cylindri-

cal connectors incorporate crimp contacts in a spring tower

retention system.

Amphenol^®PC-CE Series threaded coupling miniature cylindri-

cal connectors incorporate crimp contacts in a nylon wafer

retention system to maintain contact position.

Recommended

Operating

Test Voltage AC (RMS), 60 cps

Service

Rating

AC Voltage

at Sea Level

Sea

50,000 70,000 110,000

Level

ft.

I

600

1,500

2,300

500

750

375

500

200

II

1,000

The PC double stub threaded coupling system cannot be cross

threaded, and is mechanically assisted while engaging and dis-

engaging.

† Silver plated wire per MIL-C-26482

PC-SE and PC-CE Service Classes

Shell components are aluminum. Bright cadmium plating to QQ-P-

416 with a clear chromate after-treatment provides a golden colored

conductive finish. Single key/keyway polarization represents maxi-

mum simplicity in a design proven in millions of AN connectors.

PC-SE and PC-CE connectors are available in the

three service classes listed below.

“SE”

Open wire sealing - environmental resistant,

with a nut and grommet for moisture proof-

ing individual wires

Both pins and sockets are machined from a copper alloy and are gold

plated. This gold plating eliminates contact corrosion and offers an

indefinite shelf life. Socket contacts for these series are a closed entry

design.

“SE” (SR)Strain relief clamp - environmental resistant

strain relief clamp and grommet for moisture

proofing individual wires; provides added

wire bundle support

Both the insert and main joint gasket are molded from resilient neo-

prene. This provides excellent moisture sealing at the gasket and

superior electrical insulation of the contacts in the insert.

“SP”

Translucent nylon boot for retaining cus-

tomer applied potting compounds; held in

place by a threaded ring

The PC-SE and PC-CE are only intermateable and intermountable

within the PC threaded coupling series.

Shell style drawing pages are not shown in this catalog for the PC-SE

and PC-CE styles. If connector drawings are needed please contact

Amphenol for assistance. Shell styles are currently available in these

series as follows:

“SE”

open wire seal

• PC00-SE, wall mounting receptacle

• PC01-SE, cable connecting receptacle

• PC02-SE, box mounting receptacle

• PC06-SE, straight plug

• PC08-SE, 90 degree plug

• PC06-CE straight plug (will mate with PC-SE receptacles and PC

solder receptacles)

“SE” (SR)

strain relief

Please contact Amphenol for complete information, as there may be

limitations in shell sizes within the PC-SE and PC-CE series.

Refer to pages 4-11 for insert arrangement availability.

* This connector style is sometimes referred to as a cable connecting “plug”.

It does, however, mate with either a straight or 90 degree plug.

“SP”

potting boot

62

PC-SE, PC-CE

how to order

PC-SE, PC-CE

To more easily illustrate ordering procedure, part number

PC-SE00A-20-41PW (SR) is shown as follows:

PC-SE 00 SP

–

20 – 41

P

6

W

7

(SR)

8

1

2

3

4

5

See code below:

1. Connector Type

“PC-SE” designates bright cadmium plated with clear chromate after

treatment, threaded coupling connector with crimp contacts, incorporat-

ing a spring tower retention system

“PC-CE” designates bright cadmium plated with clear chromate after

treatment, threaded coupkling connector with crimp contacts, incorpo-

rating a nylon waftr retention system to maintain contact postion

2. Shell Styles PC-SE - consult Amphenol for availability.

“00”

“01”

“02”

“06”

“08”

designates wall mounting receptacle

designates cable connecting receptacle^†

designates box mounting receptacle

designates straight plug

designates 90 degree plug

2. Shell Style PC-CE - consult Amphenol for availability.

“06” designates straight plug

3. Service Class

“SE” designates environmental crimp

“SP” designates potted type crimp

Both of the above are Amphenol^®proprietary versions of the MIL-C-

26482, Series 1 crimp contact connector and offer 7 lbs. contact reten-

tion for size 20 contacts; 9 lbs for size 16 contacts.)

4. Shell Size

“20”

designates shell size. Please contact Amphenol for complete

information, as there may be limitations in shell sizes with the PC-SE

and PC-CE series.

5. Insert Arrangement

Refer to pages 4-11 for insert availability.

“20 – 41” designates insert arrangement. (The number following the

hyphen is the number only that is used in the part number).

6. Contacts

“P”

“S”

designates pin contacts.

designates socket contacts.

7. Insert Rotation

Refer to page 7.

“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “nor-

mal” position. No letter required for normal (no rotation) position.

8. “(SR)” designates strain relief clamp.

Indicate optional finishes as follows:

(001) bright cadmium (standard on “PC”)

(003) olive drab cadmium plate

(005) anodic coating - Alumilite^®

(011) chromate treated (Iridite 14-2)

(014) olive drab cadmium plate over nickel

(023) electroless nickel

†

This connector style is sometimes referred to as a cable connecting “plug”.

It does, however, mate with either a straight or 90 degree plug.

63

PT, SP, PC

accessories – sealing plugs, flange gaskets,

potting boots

SEALING PLUGS – FOR PT, SP, PC

Amphenol^®

Part

Number

10-405996-12 MS27488-12

10-405996-16 MS27488-16

10-405996-20 MS27488-20

A

Dia.

±.010

.121

.083

.060

B

Dia.

±.005

.171

.133

.090

C

B

DIA

Contact

Size

12

16

20

MS

Number

C

±.010

.564

Color

Code

Yellow

Blue

.135 +.030

–.025

Red

A

DIA

How to Order: Order by 10- (Proprietary) or MS part number as shown in chart above.

SEALING PLUG

MS27488-XX

10-405996-XX

MOUNTING FLANGE GASKETS – FOR PT, SP, PC

.130 DIA SIZE 6 TO 22

.156 DIA SIZE 24

.160 DIA 10-150949

PT, SP, PC

10-101949

10-150949

S

F

PT, PC

10-101949

SP

10-150949

F

Shell

Size

6

8

10

12

14

16

18

20

22

24

R

±.010

.469

.594

.719

.813

.906

.969

1.063

1.156

1.250

1.375

S

±.010

.688

.812

.938

1.031

1.125

1.219

1.312

1.438

1.563

1.688

R

±.010

.641

.734

.812

.938

1.031

1.125

1.203

1.297

1.375

1.500

S

±.010

+.016

–.000

.375

.500

.625

.750

T

±.008

R

S

.953

1.047

1.125

1.250

1.344

1.438

1.516

1.672

1.750

1.875

.024

T

R

.875

1.000

1.125

1.250

1.375

1.500

MOUNTING FLANGE GASKET

10-101949-XX

10-150949-XX

How to Order: For PT, PC: 10-101949-XX (complete order number with desired shell size).

For SP: 10-150949-XX (complete order number with desired shell size).

75° POTTING BOOTS – FOR PT, SP, PC

B

E

Shell

Size

B

Max.

D

±.015

E

±.015

.438

.562

.688

.781

.890

1.000

1.125

1.234

1.374

L

Max.

.766

.830

.861

.916

.936

.959

15º

REF

8

10

12

14

16

18

20

22

24

.433

.493

.552

.643

.658

.689

.750

.794

1.070

.312

.438

.516

.625

.656

.703

.766

.812

.918

D

L

1.052

1.073

1.310

75° POTTING BOOT

10-101988-XX

How to Order: 10-101988-XX (complete order number with desired shell size).

All dimensions for reference only.

64

PT, SP, PC

accessories – clamps

CLASS “E” STRAIN RELIEF CLAMP – FOR PT, SP, PC

Shell

Size

B

Max.

C Thread

Class 2B

D

Min.

G

Max.

L

Max.

L

8

10

12

14

16

18

20

22

24

.550

.675

.803

6-32 NC

8-32 NC

.240

.302

.428

.552

.615

.740

.928

.812

.875

.930

1.000

1.125

1.188

1.438

1.719

B

D G

.920

.930

1.047

1.165

1.291

1.418

1.533

1.062

1.093

C

CLASS “E” STRAIN RELIEF CLAMP

10-101971-XX

How to Order: 10-101971-XX X

Add desired

Add desired finish suffix^†

shell size

“1” designates bright cadmium with clear chromate

“3” designates olive drab cadmium

“5” designates Alumilite^®

Not for use with jam nut style connectors.

CLASSES “A” & “P” STRAIN RELIEF CLAMP – FOR PT, SP, PC

C

L

Shell

Size

B

Max.

Thread

Class 2B

D

Min.

G

Max.

+.010

–.020

8

10

12

14

16

18

20

22

24

.540

.665

.793

6-32 NC

8-32 NC

.240

.302

.428

.552

.614

.740

.928

.938

.812

.875

.843

.975

B

D G

1.000

1.125

1.188

1.438

1.719

.910

1.037

1.155

1.281

1.408

1.533

.975

C

1.007

CLASSES “A” & “P” STRAIN

RELIEF CLAMP

10-101980-XX

How to Order: 10-101980-XX X

Add desired

Add desired finish suffix^†

shell size

“1” designates bright cadmium with

clear chromate

“3” designates olive drab cadmium

“5” designates Alumilite^®

Not for use with jam nut style connectors.

CLASS “A” CABLE CLAMPS – FOR PT, SP, PC

V Thread

Shell

Size

Amphenol^®

Part Number

A

±.031

B

Max.

C

V

Dia. Min.

Thread

10

12

14

16

18/20

22/24

97-3057-1004

97-3057-1007

97-3057-1008

97-3057-1010

97-3057-1012

97-3057-1016

.795

.850

.920

.927

1.015

.842

.995

1.120

1.216

1.403

1.683

.3125

.4375

.5625

.6250

.7500

.9375

.6250-24

.7500-20

.8750-20

1.0000-20

1.1875-18

1.4375-18

B

How to Order: Order by 97-3057-XXXX number listed above. Standard finish is olive

drab zinc alloy. Consult Amphenol, Sidney, NY for alternate finishes.

C

A

CLASS “A” CABLE CLAMP

97-3057-XXXX

†

Standard accessory finishes are “1” bright cadmium with clear chromate for PC

types, “3” olive drab cadmium for PT and MS/PT types, “5” Alumilite^®for SP types.

Electroless nickel plating is also available on some items; consult Amphenol, Sid-

ney, NY

All dimensions for reference only.

65

PT, SP, MS/PT

accessories – protection caps

RECEPTACLE PROTECTION CAPS – FOR PT, SP, MS/PT

C

B

B Dia.

+.010

–.000

C Dia.

+.010

–.000

G

Dia.

Max.

L

X

Shell

Size

+.020

–.000

Std. & MS

RA, CA, NA RAL/CAL/NAL

MS only

L

6

8

.328

.454

.578

.703

.844

.454

.578

.703

.577

.706

.816

1.000

1.128

1.257

1.367

1.496

1.624

1.747

.563

.603

3.000

3.500

4.000

5.000

10

12

14

16

18

20

22

24

+.010

–.005

G

.140

DIA

.891

1.016

1.141

1.266

1.391

1.516

1.614

.969

X

1.094

1.219

1.343

1.453

RECEPTACLE PROTECTION CAP

FOR PT, SP, MS/PT CONNECTORS

How to Order Proprietary Receptacle Caps:

Wall Receptacle Caps:

10-101960- XX X

10-101960-XXX

MS3181-XXX

(Wall Receptacle)

10-101961-XXX

(Cable Connecting

Receptacle)

10-101964-XXX

MS3181-XXX

(Jam Nut Receptacle)

Cable Connecting Receptacle Caps: 10-101961- XX X

Jam Nut Receptacle Caps:

10-101964- XX X

Add desired shell size

Add desired finish suffix^†

“1” designates bright cadmium with clear chromate

“3” designates olive drab cadmium

“5” designates Alumilite^®

Proprietary caps are supplied with standard bead chains only (as shown in draw-

ing at left). For other chain options, an MS version cap should be ordered.

How to Order MS Version Receptacle Caps:

Wall Receptacle Caps:

MS3181- XX -CA for sash chain

-CAL for long sash chain

-RA for rope chain

-RAL for long rope chain

MS3181- XX -NA for sash chain

-NAL for long sash chain

Jam Nut Recept. Caps:

Shell size

MS versions are supplied with standard anodize finish only. For other finish

options a proprietary cap should be ordered.

PLUG PROTECTION CAPS – FOR PT, SP, MS/PT

N Dia.

+.001

–.005

.348

.473

.590

.750

L Dia.

+.025

–.015

X

.140 +.010

Shell

Size

6

8

10

12

14

16

18

20

22

24

Std. & MS

CA, RA

MS only

CAL/RAL

–.005

L

DIA

FOR SIZE 24

.532

.594

.627

3.000

3.500

4.000

5.000

.125 +.010

–.005

DIA

N

FOR SIZE 6-22

.875

1.000

1.125

1.250

1.375

1.500

X

PLUG PROTECTION CAP

FOR PT, SP, MS/PT CONNECTORS

MS3180-XXX

10-101957-XXX

How to Order Proprietary Plug Caps: 10-101957-XX X

Add desired shell size

Add desired finish suffix^†

“1” designates bright cadmium with clear chromate

“3” designates olive drab cadmium

“5” designates Alumilite^®

Proprietary caps are supplied with standard bead chains only (as shown in draw-

ing at left). For other chain options an MS version cap should be ordered.

†

Standard accessory finishes are “1” bright cadmium with clear chro-

mate for PC types, “3” olive drab cadmium for PT and MS/PT types,

“5” Alumilite^®for SP types. Electroless nickel plating is also available

on some items; consult Amphenol, Sidney, NY

How to Order MS Version Plug Caps: MS3180- XX -CA for sash chain

-CAL for long sash chain

All dimensions for reference only.

Shell size

-RA for rope chain

-RAL for long rope chain

MS versions are supplied with standard anodize finish only.

For other finish options a proprietary cap should be ordered.

66

PC

accessories – protection caps

RECEPTACLE PROTECTION CAPS – FOR PC

C

B Dia.

+.010

–.000

C Dia.

+.010

–.000

B

Shell

Size

A Thread

Class 2B

G

L

X

Max.

.520

.648

.776

.902

1.030

1.157

1.284

1.412

1.507

Max.

±.250

L

A

6

8

10

12

14

.3750 DS

.5000 DS

.6250 DS

.7500 DS

.8750 DS

.328

.454

.578

.703

.844

.454

.578

.703

.448

3.000

3.500

4.000

+.010

–.005

G

.891

.125

DIA

1.016

1.141

1.266

1.391

1.516

16 1.0000 DS

18 1.1250 DS

20 1.2500 DS

22 1.3750 DS

.969

X

1.094

1.219

1.343

RECEPTACLE PROTECTION CAP

FOR PC CONNECTORS

How to Order Proprietary Receptacle Caps for PC connectors only:

Wall Receptacle Caps: 10-101950- XX X

Cable Connecting Receptacle Caps: 10-101951- XX X

10-101950-XXX

(Wall Receptacle) (Cable Connecting

Receptacle)

10-101951-XXX

10-101956-XXX

(Jam Nut Receptacle)

Jam Nut Receptacle Caps:

10-101956- XX X

Add desired shell size

Add desired finish suffix^†

“1” designates bright cadmium with clear chromate (standard for PC)

“3” designates olive drab cadmium

“5” designates Alumilite^®

Caps for PC connectors are supplied only in proprietary versions with standard

bead chains only (as shown in drawing at left).

PLUG PROTECTION CAPS – FOR PC

B

Shell

Size

A Thread

Class 2A

+.010

–.000

G

Max.

L

Max.

X

±.250

L

A

6

8

.3750 DS

.5000 DS

.6250 DS

.7500 DS

.8750 DS

1.0000 DS

1.250 DS

1.2500 DS

1.3750 DS

.328

.454

.578

.703

.844

.399

.526

.643

.770

.897

1.025

1.152

1.279

1.416

.557

3.000

3.500

4.000

10

12

14

16

18

20

22

G

X

.969

1.094

1.219

1.343

PLUG PROTECTION CAP

FOR PC CONNECTORS

10-101955-XXX

How to Order Proprietary Plug Caps for PC only: 10-101955-XX X

Add desired shell size

Add desired finish suffix^†

“1” designates bright cadmium with clear chromate (standard for (PC)

“3” designates olive drab cadmium

“5” designates Alumilite^®

Caps for PC connectors are supplied only in proprietary versions with standard

bead chains only (as shown in drawing at left).

†

Standard accessory finishes are “1” bright cadmium with clear chromate for PC

types, “3” olive drab cadmium for PT and MS/PT types, “5” Alumilite^®for SP

types. Electroless nickel plating is also available on some items; consult Amphe-

nol, Sidney, NY

All dimensions for reference only.

67

PT, SP, PC

accessories – dummy receptacles, “O” rings,

plastic dust caps

DUMMY RECEPTACLES – FOR PT, SP, MS/PT

S

Proprietary Version

MS Version

R¹

M

+.030

–.000

N

+.001

–.005

.473

.590

.750

.150 DIA. +.004

S¹

M

Shell

Size

K

±.010

R

S

S¹

–.002

R

R¹

4 HOLES

±.005

±.010

(TP)

K

8

10

12

14

16

18

20

22

24

.062

.462

.556

.589

.734

.812

.938

1.031

1.125

1.203

1.297

1.375

1.500

1.047

1.125

1.250

1.344

1.438

1.516

1.672

1.750

1.875

.594

.719

.828

.954

.812

.906

.969

1.062

1.156

1.250

1.375

1.047

1.141

1.234

1.328

1.453

1.578

1.703

R

S

.875

N

R¹ S¹

1.000

1.125

1.250

1.375

1.500

DUMMY RECEPTACLE

FOR PT, SP, MS/PT CONNECTORS

MS3115-XXX

10-150921-XXX

How to Order Proprietary Dummy Receptacles: 10-150921-XX X

Add desired shell size

Add desired finish suffix^†

“1” designates bright cadmium with clear chromate

“3” designates olive drab cadmium

“5” designates Alumilite^®

How to Order MS Version Dummy Receptacles: MS3115-XX X

Add desired shell size

Add desired finish suffix^†

-A designates Alumilite^®

-L designates electroless nickel

-W designates olive drab cadmium

NEOPRENE “O” RINGS – FOR PC

J

T

Shell

Size

Amphenol®

Part Number

J Dia.

±.010

T Dia.

±.003

6

8

10-101937-6

10-101937-8

10-101937-10

10-101937-12

10-101937-14

10-101937-16

10-101937-18

10-101937-20

10-101937-22

.172

.328

.406

.531

.641

.781

.906

.984

1.109

.031

10

12

14

16

18

20

22

NEOPRENE “O” RING

FOR PC CONNECTORS

10-101937-XX

How to order “O” rings: Order by 10- (Proprietary) only as shown

in chart above.

PLASTIC DUST CAPS

FOR PT, SP

FOR PC

Shell

Size

Plug

Plastic Dust Cap

Receptacle

Plastic Dust Cap

How to Order Plastic Dust Caps:

Shell

Size

Plug

Plastic Dust Cap

Receptacle

Plastic Dust Cap

To the basic order number add the dust cap size to

match connector plug or receptacle shell size, as

shown in the tables above.

Example: 10-70506-12 would be the correct order

number for a plastic dust cap for a PT00 receptacle,

shell size 10.

6

10-70500-8

10-70506-8S

10-70506-10

10-70506-12

10-70506-14

10-70506-16

10-70506-18

10-70506-20

10-79506-22

10-70506-24

10-70524-1

6

8

10-70576-6

10-70576-8

10-70500-8

10-70500-10

10-70500-12

10-70500-14

10-70576-18

10-70576-20

10-70576-22

10-70576-8

10-70500-8

10-70500-10

10-70500-12

10-70500-14

10-70500-16

10-70500-18

10-70500-20

10-70500-22

8

10-70506-12

10-70500-12

10-70506-16

10-70506-18

10-70506-20

10-70506-22

10-70506-24

10-70524-1

10

12

14

16

18

20

22

24

10

12

14

16

18

20

22

All dimensions for reference only.

10-70506-28

68

Application Tools

“SE”, “CE”

The following data includes information pertaining to the application tools for crimping, insert-

ing and removing size 20, 16, and 12 contacts incorporated in Amphenol^®Miniature Cylindri-

cal Connectors.

All crimping tools included are the “full cycling” type, and when used as specified by the manu-

facturer, provide reliable crimped wire to contact termination.

Tool frames and turret heads are available from approved tool manufacturers; consult Amphe-

nol, Sidney, NY for listings.

Assembly instructions are available online at www.amphenol-aerospace.com

See the following:

L-786 for SE assembly instructions

L-658 for CE assembly instructions

L-555 for solder type instructions

CRIMPING TOOLS

FOR PT-SE, SP-SE, PC-SE, MS/PT-SE

(MIL-C-26482, Series 1) Connectors

FOR PT-CE, SP-CE, PC-CE (Proprietary)

Connectors

MS Tool Part Number

Contact

MS Tool Part Number

Contact

Size

Tool Frame

M22520/1-01

Turret Head

M22520/1-02

Size

Tool Frame

M22520/1-01*

Turret Head

20

*

16

12

* Use Daniels TH254 or equivalent

INSERTION/REMOVAL TOOLS

FOR PT-SE, SP-SE, PC-SE, MS/PT-SE

(MIL-C-26482, Series 1) Connectors

Insertion Tool

Removal Tool

MS

Part Number

Contact

Amphenol^®

Contact

Insertion Pliers Insertion Tool

Amphenol^®

Contact

Amphenol^®

Contact

Part Number

Contact

Size

Insertion Tool Removal Tool Removal Tool

20

16

12

11-8107-20

11-8107-16

–

11-7401-20

11-7401-16

–

M81969/17-03

M81969/17-04

M81969/17-05

11-7880-20

11-7880-16

–

M81969/19-07

M81969/19-08

M81969/19-09

FOR PT-CE, SP-CE, PC-CE (Proprietary)

Connectors

Insertion/Removal Tool

Contact

Size

Contact Insertion

Contact Removal Tool

Kit

Pliers

20

16

11-6782

11-6781

11-6900

69

Contacts - Powe r and The rmocouple Crimp

for miniature cylindrical connectors

The following tables provide part number information for crimp contacts

used in Amphenol^®Miniature Cylindrical Connectors. For additional infor-

mation, consult Amphenol, Sidney, NY.

CRIMP CONTACTS for MIL-C-26482, Series 1

(PT-SE, SP-SE) Connectors

Pins

Sockets

Amphenol^®

Proprietary

Number

Contact Accommodates

Size Wire Size

Proprietary

Number

MS Number

20

20, 22 & 24 AWG M39029/31-240 10-314980-20P M39029/32-259 LP-597820-355

16, 18 & 20 AWG M39029/31-228 10-314980-16P M39029/32-247 10-257982-16F

16

12

12 & 14 AWG

16 AWG

M39029/31-235 10-807100-125 M39029/32-254 10-807103-125

20-16

16-20

12-10

10-330930-20F

10-330932-16F

10-330938-12F

10-807155-205

10-330933-16F

10-330939-12F

20 AWG

12 AWG

CRIMP CONTACTS for PT-CE (Proprietary) Connectors

Pins

Sockets

Amphenol^®

Proprietary

Number

Contact Accommodates

Size Wire Size

Amphenol^®

Proprietary Number

20

20, 22 & 24 AWG 10-189000-20F

16 AWG 10-195962-20F

16, 18 & 20 AWG 10-189004-16F

10-597817-351

10-195963-20F

10-189006-16F

20-16

16

THERMOCOUPLE CONTACTS for Miniature Connectors

Pins

Proprietary Part Number

Sockets

Proprietary Part Number

Size

Material

Chromel

Alumel

CE

SE

CE

SE

10-252900-21P

10-252900-22P

10-330940-21P

10-330940-22P

10-252900-21S

10-252900-22S

10-330940-21S

10-330940-22S

16

Crimp

Termination

Iron

Constantan

Chromel

Alumel

10-252900-1P

10-252900-2P

10-252900-3P

10-252900-4P

10-314910-1P

10-314910-2P

10-314910-3P

10-314910-4P

10-330940-1P

10-330940-2P

10-330940-3P

10-330940-4P

10-252900-1S

10-252900-2S

10-252900-3S

10-252900-4S

10-314910-1S

10-314910-2S

10-314910-3S

10-314910-4S

10-330940-1S

10-330940-2S

10-330940-3S

10-330940-4S

20

Crimp

Termination

Iron

Constantan

Chromel

Alumel

20

Solder

Termination^††

Iron

Constantan

†† Listed are insertable/removable contacts; however, it is intended that contacts be terminated with solder.

For additional thermocouple contact information, consult Amphenol, Sidney, NY.

See L-776 for thermocouple contact termination instructions. These are online at www.amphenol-aerospace.com

For PCB contacts for miniature connectors, see page 20.

70

Coaxial Contacts

for miniature cylindrical connectors

Amphenol^®Miniature Connectors can incorporate shielded coax contacts.

The Miniature family is built around MIL-C-26482 specifications, with Mil-

approved and proprietary styles offered. Normal operating voltage for Minia-

ture cylindricals with power only contacts is up to 1,000 VAC (RMS) at sea

level.

Miniature Cylindricals offer these features for contact termination

flexibility:

Solder Coax Contact

for use in Miniature Solder Type Connectors

•

Several insert arrangements that can incorporate:

• Size 8 & 12 Crimp Coax contacts for Crimp type

• Size 8 & 12 Solder Coax contacts for Solder type

Wide selection of connector shell styles and sizes

Standard power contact options within the various connector styles

include: solder type, crimp front release, crimp rear release

Coax contacts are designed to the same high performance standards as

power contacts. Coax and power contacts may be intermixed with no deg-

radation of connector reliability.

•

No mis-mating or cross-plugging with insert rotation and keyway

polarization.

Pin Crimp Coax Contact

for use in Miniature Crimp SE Type Connectors

GENERAL ORDERING INFORMATION

Amphenol Miniature Cylindricals are normally supplied with a full complement

of power contacts, separately packaged. Coax contacts are ordered by part

number as referenced in the part number charts on the following pages of this

catalog, and are substituted for the power contacts at the time of the cable or

equipment assembly. If the application is for coax only, the connector may be

ordered less contacts and no power contacts will be supplied.

Installation instructions for the coax contacts for Miniature Connectors are

provided in Amphenol documents as follows: L-633 for solder type; L-613 for

SE type; L-660 for CE type.

Socket Crimp Coax Contact

for use in Miniature Crimp SE Type Connectors

HOW TO ORDER:

A. Select the coax contacts designed for the cable being used from the appli-

cable charts in this catalog for each Miniature type (solder, SE or CE).

B. Select a connector insert from those shown on pages60-63 which will

accommodate the quantity and size of coaxial contacts needed plus any

power contacts required. Note: Size 8S and 12S contacts are used with

connector inserts through shell size 18 only. For larger connector shell

sizes, use size 8L contacts.

C. Determine the Miniature Cylindrical type, shell style, finish, service class

and insert rotation required for your application.

D. Consult Amphenol, Sidney NY with the pertinent cable, contact, insert

arrangement and connector style choices for complete connector part

number.

71

Coaxial Contacts

for miniature cylindrical connectors, cont.

®

Amphenol Coaxial Contacts designed for use in Miniature Cylindrical Connectors

offer the same durability advantages and design benefits for reliable interconnection as the

Amphenol coax contacts used in high performance D38999 connectors. A variety of military

and commercial shielded cables are accommodated within the miniature cylindrical series.

Amphenol supplies coax contacts for solder, crimp SE and crimp CE connector styles.

Other features of the coax for miniature cylindricals include:

•

Miniature coax design has an outside nut within the

assembly for fast, reliable assembly of contact to cable.

TYPICAL MINIATURE CRIMP COAX

SOCKET CONTACT has crimp socket outer

contact with a solder pin inner contact

All types feature solder style inner contacts and crimp

style outer contacts for reliable cable termination

Miniature coax crimp type contacts are designed for use

in Miniature crimp series connectors

Miniature coax solder type contacts are designed for

use in Miniature solder series connectors. These

come pre-installed into the solder connector.

TYPICAL ELECTRICAL PERFORMANCE

Size 8 and 12 Coax Contacts

Contact Resistance:

Center @ 1 Amp, 170 millivolts max. voltage drop @ 25°C

Outer @ 12 Amps, 150 millivolts max. voltage drop @ 25°C

TYPICAL MINIATURE CRIMP COAX PIN

CONTACT has crimp pin outer contact

with a solder socket inner contact

Dielectric Withstanding Voltage:

Size 8: 1,300 VAC Rms @ sea level

Size 12: 1,000 VAC Rms @ sea level

Size 8 & 12: 250 VAC Rms @ 50,000 ft.

Insulation Resistance

5,000 megohms minimum @ 25°C

Typical VSWR for size 8 & 12 PT-SE Types II & III only:

1.2 + .12F (GHz) up to 10 GHz

EXPLANATION OF TYPE CLASSIFICATIONS:

PT-SE Type I is moisture seal design with internal O-ring.

PT-SE Type II is 50 ohm impedance matched version. Contacts ter-

minated to other than 50 ohm cables are therefore not matched.

PT-SE Type III is 50 ohm contact, non-serviceable after assembly

Solder and CE Types are non-impedance matched contacts.

CONTACT FINISHES:

Suffix

Finish

1

2

3

4

5

E

F

H

0.00020 min. silver over copper flash

0.00005 min. gold (Knoop hardness 130-200) over silver

0.00010 min. gold (Knoop hardness 130-200) over silver

0.00010 min. gold (Knoop hardness 130-200) over copper

0.00005 min. gold (Knoop hardness 130-200) over nickel

0.00005 min. gold (Knoop hardness 90 max.) over copper

0.00005 min. gold (Knoop hardness 130-200) over copper

0.00010 min. gold (Knoop hardness 130-200) over copper

72

Coaxial Contacts

for miniature cylindrical connectors, cont.

solder (MIL-C-26482 Series 1 type) - application data

MATING

PIN DIA

H

L

F

G

SOCKET

L

H

F

MATING

G

PIN DIA

NOTE: All contacts of the same size and the same inner and outer contact

diameters (G & H) will mate with each other.

SOLDER COAX CONTACTS

For use in Miniature Solder Type Connectors: PT, SP, MS/PT and PC Styles

Dimensional Data

(See Drawings above)

Contact Part Number

Crimp Ferrule Tools

L

Contact

Size

Length Ref.

Retainer Nut

Wrench

F

Cable

H

Dia.

±0.001

G

Dia.

Across

Flats

±0.004

MIL-T-22910/7-1

Tool

Use with Die Part

Number

MIL-C-22520/5-01

Tool

Use with Die Part

Number

MIL-C-22520/10-01

Tool

Use with Die Part

Number

Socket

Pin Socket

RG-58C/U,

RG-141A/U,

RG-303/U

0.040

± 0.001

M22520/5-05 (B)

M22520/5-41 (B)

21-33020-2

21-33019-2

8S

0.219

0.280

1.114 1.115

M22910/7-15 (B)

M22520/10-07 (B)

11-8676-2

0.040

± 0.001

RG-59B/U,

RG-62A/U,

RG-62B/U,

RG-210/U

21-33020-1

21-33020-3

21-33019-1

21-33019-3

8L

8S

0.219

0.280

1.176 1.177

1.114 1.115

M22910/7-18 (B)

M22910/7-16 (B)

M22520/5-45 (B)

M22520/5-43 (B)

11-8676-3

11-8676-2

0.040

± 0.001

RG-142B/U,

Times MI51115

0.040

± 0.001

21-33020-7* 21-33019-7*

RG-161/U,

RG-174A/U,

RG-179B/U,

RG-187A/U,

RG-188A/U,

RG-316/U

M22520/5-03 (A)

M22520/5-08 (A)

M22520/5-35 (B)

0.0300

± 0.0005

21-33020-32* 21-33019-32*

12S

0.140

0.172

1.092 1.093

M22910/7-12 (B)

M22520/10-05 (A)

11-8676-1

0.040

± 0.001

M22520/5-03 (B)

M22520/5-33 (B)

RG-178B/U

RG-196A/U

21-33020-4

21-33019-4*

8S

0.219

0.140

0.280

0.172

1.114 1.115

1.092 1.093

M22910/7-11 (B)

M22520/10-05 (B)

11-8676-2

11-8676-1

0.0300

± 0.0005

M22520/5-03 (B)

M22520/5-33 (B)

21-33020-31† 21-33061-31*†

21-33020-5* 21-33019-5*

12S

RG-180B/U,

RG-195A/U,

Raychem

0.040

± 0.001

M22520/5-05 (B)

M22520/5-41 (B)

8S

0.219

0.280

1.114 1.115

M22910/7-15 (B)

M22520/10-07 (B)

11-8676-2

5022D1312-9

Raychem

5021D1331-9

0.040

± 0.001

M22520/5-05 (B)

M22520/5-41 (B)

21-33020-6* 21-33019-6*

21-33020-33 21-33061-33

8S

0.219

0.140

0.280

0.172

1.114 1.115

1.092 1.093

M22910/7-15 (B)

M22910/7-13 (B)

11-8676-2

11-8676-1

Thermatics

2929-29

0.0200

± 0.0005

12S

M22520/5-37 (B)

NOTE: Contacts can be ordered by part numbers given in chart

* Consult Amphenol, Sidney NY for availability

NOTE: Size 8S and 12S contacts are used with connector inserts through

CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers

indicate applicable die closure. Commercial equivalents with the same die closure

dimension may be used.

shell size 18 only. For larger connector shell sizes, use size 8L contacts.

CONTACT FINISH: For all contacts in this series feature 0.000050 minimum

gold (Knoop hardness 130-200).

†

21-33020-31 and 21-33061-31 only mate with each other

73

Coaxial Contacts

for miniature cylindrical connectors, cont.

crimp SE (MIL-C-26482 Series 1 type) - application data

L

F

G

H

G

H

MATING

PIN DIA

MATING

PIN DIA

F

SOCKET

NOTE: All contacts of the same size and the same inner and outer contact

diameters (G & H) will mate with each other.

SE CRIMP COAX CONTACTS

For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, MS/PT-SE and PC-SE Styles

Dimensional Data

(See Drawings above)

Installation Tools

Finish

on

Mating

Parts

(See

Contact Part Number

Crimp Ferrule Tools

L

Retainer

Nut

Wrench

Type

(See

Pg. 23)

Contact

Size

Length Ref.

F

Cable

H

Dia.

±0.001

G

Across

Flats

±0.004

MIL-T-22910/7-1 MIL-C-22520/5-01 MIL-C-22520/10-0

Insertion Removal

Dia.

Tool

Pg. 23)

Socket

Pin Socket

Use with Die Part Use with Die Part Use with Die Part

Number

21-33012-21 21-33011-21

21-33012-25 21-33011-25

8

I

II

2

4

RG-55B/U,

RG-142A/U, 21-33038-21 21-33037-21

RG-142B/U, 21-33038-25* 21-33037-25

8

I

II

0.0355

±0.0010

M22520/5-05 (A)

M22520/5-19 (B)

11-8369-5 11-7880-8

11-8660-5 11-8154-1

0.218

0.280 1.156 1.144 M22910/7-17 (B)

0.280 1.156 1.144 M22910/7-15 (B)

M22520/10-07 (A) 11-8676-2

M22520/10-07 (B) 11-8676-2

RG-223/U

21-33138-21( )* 21-33137-21( )*

21-33138-25( )* 21-33137-25( )*

8

I

II

**

2

21-33012-22 21-33011-22

21-33012-26 21-33011-26

8

I

II

RG-58C/U,

21-33038-22* 21-33037-22

RG-141A/U,

8

I

II

0.0355

±0.0010

M22520/5-05 (B)

M22520/5-41 (B)

11-8369-4 11-7880-8

11-8660-4 11-8154-1

4

21-33038-26* 21-33037-26*

RG-303/U

21-33138-22( )* 21-33137-22( )

21-33138-26( )* 21-33137-26( )*

8

I

II

**

RG-59B/U,

RG-62A/U,

RG-62B/U,

21-33012-36 21-33011-36

21-33038-36* 21-33037-36

8

II

2

4

0.0355

±0.0010

11-8369-5 11-7880-8

11-8660-5 11-8154-1

0.218

0.280 1.156 1.144 M22910/7-18 (B) M22520/5-45 (B)

11-8676-3

RG-210/U 21-33138-36( )* 21-33137-36( )

21-33012-37* 21-33011-37*

RG-140/U,

RG-302/U

**

2

0.0355

±0.0010

M22520/5-05 (A)

0.280 1.156 1.144 M22910/7-17 (B)

M22520/5-19 (B)

11-8369-5 11-7880-8

11-8660-5 11-8154-1

21-33038-37* 21-33037-37*

4

M22520/10-07 (A) 11-8676-2

21-33138-37( )* 21-33137-37( )*

**

21-33012-34 21-33011-34

21-33012-30 21-33011-30

8

I

II

2

4

21-33038-34 21-33037-34

21-33038-30 21-33037-30

8

I

II

0.0355

±0.0010

11-7880-8

11-8154-1

0.218

0.280 1.156 1.144

11-8676-2

RG-161/U,

21-33138-34( )* 21-33137-34( )*

RG-174A/U,

8

I

II

**

2

M22520/5-03 (A)

M22910/7-12 (B) M22520/5-08 (A) M22520/10-05 (A)

21-33138-30( )* 21-33137-30( )*

RG-179B/U,

RG-187A/U,

RG-188A/U,

RG-316/U

11-8369-2

11-8660-2

21-33012-1

21-33012-4

21-33011-1

21-33011-4

12

I

II

M22520/5-35 (B)

21-33038-1* 21-33037-1*

21-33038-4 21-33037-4*

12

I

II

0.0200

±0.0005

11-7880-12

11-8154-2

4

0.128

0.218

0.128

0.172 1.092 1.072

0.280 1.156 1.144

11-8676-1

11-8676-2

21-33138-1( )* 21-33137-1( )

12

I

**

21-33138-4( )* 21-33137-4( )* 12

II

21-33012-35 21-33011-35

21-33038-35 21-33037-35

21-33138-35( )* 21-33137-35( )*

21-33012-3* 21-33011-3*

8

I

2

4

0.0355

±0.0010

11-7880-8

11-8154-1

**

12

I

II

RG-178B/U,

RG-196A/U

M22520/5-03 (B)

M22520/5-33 (B)

11-8369-1

11-8660-1

2

4

M22910/7-11 (B)

M22520/10-05 (A)

21-33012-5

21-33038-3* 21-33037-3*

21-33038-5 21-33037-5*

21-33011-5

12

I

II

0.0200

± 0.0005

11-7880-12

11-8154-2

0.172 1.092 1.072

11-8676-1

21-33138-3( )* 21-33137-3( )* 12

21-33138-5( )* 21-33137-5( )* 12

I

II

**

NOTE: Contacts can be ordered by part numbers given in chart

* Consult Amphenol, Sidney NY for availability

** See finish options for SE crimp Miniature contacts listed on page 70. Replace the paren-

thesis of the contact part number with the finish suffix number. However, you should con-

su

l

t Am

p

henol

Sidney

N

Y

r

e

garding the availability of all finish choices for each part

CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indi-

cate applicable die closure. Commercial equivalents with the same die closure dimension

m

a

y be used

74

Coaxial Contacts

for miniature cylindrical connectors, cont.

crimp SE (MIL-C-26482 Series 1 type) - application data, cont.

NOTE: All contacts of the same size and the same inner and outer contact

diameters (G & H) will mate with each other.

SE CRIMP COAX CONTACTS

For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, MS/PT-SE and PC-SE Styles

Dimensional Data

(See Drawings pg. 25)

Installation Tools

Finish

on

Mating

Parts

(See

Contact Part Number

Crimp Ferrule Tools

L

Type

(See

Pg. 23)

Retainer

Nut

Wrench

Contact

Size

Length Ref.

F

Cable

H

Dia.

±0.001

G

Across

Flats

±0.004

MIL-T-22910/7-1 MIL-C-22520/5-01 MIL-C-22520/10-0

Insertion Removal

Dia.

Tool

Socket

Pin Socket

Pg. 23)

Use with Die Part Use with Die Part Use with Die Part

Number

21-33012-24 21-33011-24

21-33012-46* 21-33011-46*

8

I

II

2

4

RG-180B/U, 21-33038-24 21-33037-24

RG-195A/U 21-33038-46* 21-33037-46*

8

I

II

0.0355

± 0.0010

M22520/5-05 (B)

M22520/5-41 (B)

11-8369-4 11-7880-8

11-8660-4 11-8154-1

0.218

0.128

0.280 1.156 1.144 M22520/7-15 (B)

M22520/10-07 (B) 11-8676-2

21-33138-24( )* 21-33137-24( )*

21-33138-46( )* 21-33137-46( )*

8

I

II

**

Raychem

9527E1118,

RG-180B/U,

RG-195A/U

0.0200

± 0.0005

Daniels GS200 Tool with G2P330 or

M22520/31-01 Tool with Positioner M22520/31-02

11-8674- 11-7880-12

21-33106-40( ) 21-33105-40( ) 12

III

**

0.899 0.879

0.172 1.092 1.072

0.280 1.156 1.144

12

11-8154-2

21-33012-6* 21-33011-6*

21-33012-7* 21-33011-7*

12

I

II

2

4

RG-188 or

RG-316

Double Braid

21-33038-6* 21-33037-6*

21-33038-7* 21-33037-7*

12

I

II

0.0200

± 0.0005

11-8369-2 11-7880-12

11-8660-2 11-8154-2

11-8676-1

21-33138-6( )* 21-33137-6( )* 12

21-33138-7( )* 21-33137-7( )* 12

I

II

M22910/7-13 (B) M22520/5-37 (B)

**

21-33012-44 21-33011-44

21-33038-44* 21-33037-44*

21-33138-44( )* 21-33137-44( )*

21-33012-28 21-33011-28

21-33038-28* 21-33037-28*

21-33138-28( )* 21-33137-28( )*

8

II

I

2

4

Thermax

50C-25A-

DS-1

0.0355

± 0.0010

11-8369-4 11-7880-8

11-8660-4 11-8154-1

0.128

11-8676-2

**

2

RG-195

Double Braid

0.0355

± 0.0010

11-8369-4 11-7880-8

11-8660-4 11-8154-1

I

4

0.280 1.156 1.144 M22910/7-16 (B) M22520/5-43 (B)

I

**

21-33012-23 21-33011-23

21-33012-27 21-33011-27

8

I

II

2

4

RG-122/U,

Raychem

5022E5111

21-33038-23* 21-33037-23*

21-33038-27 21-33037-27

8

I

II

0.0355

± 0.0010

M22520/5-05 (B)

0.280 1.156 1.144 M22520/7-15 (B)

M22520/5-41 (B)

11-8369-4 11-7880-8

11-8660-4 11-8154-1

21-33138-23( )* 21-33137-23( )*

21-33138-27( )* 21-33137-27( )*

8

I

II

0.218

M22520/10-07 (B) 11-8676-2

**

21-33012-31 21-33011-31

21-33038-31 21-33037-31

21-33138-31( )* 21-33137-31( )*

21-33012-39 21-33011-39

21-33038-39* 21-33037-39*

21-33138-39( )* 21-33137-39( )*

21-33012-40* 21-33011-40

21-33038-40* 21-33037-40*

21-33138-40* 21-33137-40( )*

21-33012-43 21-33011-43

21-33038-43 21-33037-43

8

I

2

4

Raychem

9530D5314

I

8

I

**

2

8

II

Raychem

9527A1317

0.0355

± 0.0010

M22520/5-05 (B)

0.280 1.156 1.144 M22910/7-15 (B)

M22520/5-41 (B)

11-8369-4 11-7880-8

11-8660-4 11-8154-1

8

4

0.218

0.128

M22520/10-07 (B) 11-8676-2

8

**

2

8

M22520/5-03 (A)

Raychem

7527A1318

0.0355

± 0.0010

11-8369-2 11-7880-8

11-8660-2 11-8154-1

8

4

0.280 1.156 1.144 M22910/7-12 (B) M22520/5-08 (A) M22520/10-05 (A) 11-8676-2

M22520/5-35 (B)

8

**

2

Westrex

199-49-1,

Tensolite

12

0.0200

± 0.0005

M22520/5-03 (B)

M22520/5-33 (B)

11-8369-1 11-7880-12

11-8660-1 11-8154-2

4

0.172 1.092 1.072 M22910/7-11 (B)

M22520/10-05 (B) 11-8676-1

21-33138-43( )* 21-33137-43( )* 12

**

30850/87T-1

NOTE: Contacts can be ordered by part numbers given in chart

* Consult Amphenol, Sidney NY for availability

** See finish options for SE crimp Miniature contacts listed on page 70. Replace the paren-

thesis of the contact part number with the finish suffix number. However, you should con-

sult Amphenol, Sidney, NY regarding the availability of all finish choices for each part

number.

CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indi-

cate applicable die closure. Commercial equivalents with the same die closure dimension

may be used.

75

Coaxial Contacts

for miniature cylindrical connectors, cont.

crimp CE (MIL-C-26482 Series 1 type) - application data

MATING

PIN DIA

H

MATING

PIN DIA

G

L

F

H

F

G

SOCKET

NOTE: All contacts of the same size and the same inner and outer contact

diameters (G & H) will mate with each other.

CE CRIMP COAX CONTACTS

For use in Miniature Crimp Type Connectors: PT-CE, SP-CE and PC-CE Styles

Dimensional Data

(See Drawings above)

Crimp Ferrule Tools

L

Contact Part Number

Installation Tools

Retainer

Contact

Size

Length Ref.

F

Cable

Nut

MIL-C-22520/10-01 Wrench

Tool

G

Dia.

H

Dia.

Across

Flats

±0.004

MIL-T-22910/7-1

Tool

MIL-C-22520/5-01

Tool

± 0.001 ±0.001

Socket

Pin Socket

Insertion Removal

Use with Die Part

Number

Use with Die Part

Number

Use with Die Part

Number

RG-58C/U,

RG-141A/U, 21-33024-1 21-33023-1

RG-303/U

M22520/5-01 (B)

M22520/5-41 (B)

11-8369-4

11-7310

8

0.040

0.219

0.280 1.239 1.285

0.280 1.039 1.085

M22910/7-15 (B)

M22910/7-11 (B)

M22520/10-07 (B) 11-8676-2

M22520/10-05 (B) 11-8676-2

11-8660-4

RG-178B/U,

M22520/5-03 (B)

M22520/5-33 (B)

11-8369-1

11-7310

21-33024-2 21-33023-2

RG-196A/U

11-8660-1

NOTE: Contacts can be ordered by part numbers given in chart

Consult Amphenol, Sidney NY for availability

*

CONTACT FINISH: for all contacts in this series feature 0.000050 minimum gold (Knoop hardness 130-200).

CRIMPING TOOLS: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die

closure. Commercial equivalents with the same die closure dimension may be used.

76

Mounting Re c omme ndations

for miniature cylindrical connectors

FLANGE MOUNTED CONNECTORS

All flange mounting PC and PT connectors use standard MS

mounting dimensions. They cannot be back panel mounted

due to coupling clearance. The PTB (thru-bulkhead) type con-

nector must also be back panel mounted on one side. Flange

gaskets are available for both series, see page 64.

4 HOLES

.120 Dia. for Shell Sizes 6-22

PC & PT

.147 Dia. for

Size 24 PT

No. 4 Screw

for PC & PT

No. 6 Screw

for SP and for

Size 24 PT

R

(TP)

.150 Dia. for

SP only

R

(TP)

D

Dia.

Shell

Size

D Dia.

PC & PT

SP

.641

.734

.812

.938

1.031

1.125

1.203

1.297

1.375

–

PC & PT

SP

.439

.563

.680

.859

.984

1.108

1.233

1.358

1.483

–

6

8

.469

.594

.323

.449

R

2

10

12

14

16

18

20

22

24

.719

.573

.812

.699

.906

.823

R

2

SECTION

CUT-OUT

.969

.949

1.062

1.156

1.250

1.375

1.073

1.199

1.323

1.449

JAM NUT MOUNTINGS

The jam nut design has become very popular because it allows

bench wiring of harness assemblies. The labor saving often off-

sets the added cost of the jam nut receptacle which is due to

the self contained “O” ring and the extra nut. The PC series

mounts in a round hole and can be pinned to prevent rotation.

The PT series mounts in a “D” mounting hole and does not

require pinning.

F

B

F

R

P

R

+.010

–.000

B

+.000

–.010

Panel Thickness

Shell

Size

F

±.010

Min.

.062

Max.

.125

.250

6

8

.447

.572

.420

.542

.286

.331

.375

.442

.486

.530

.573

.641

.685

–

CUT-OUT FOR

PT ONLY

10

12

14

16

18

20

22

24

.697

.669

PIN LOCATION FOR PC ONLY

SECTION

.884

.830

1.007

1.134

1.259

1.384

1.507

1.634

.955

1.084

1.208

1.333

1.459

1.575

HERMETIC RECEPTACLES

HERMETIC RECEPTACLE MOUNTINGS

This series must be mounted in such a way as to preserve the

hermetic seal provided by the glass insert. Mounting data for

box and jam nut receptacles is given above. Cut-out required

for solder mounting receptacles (N) is given below.

N

The finish of each of these hermetic

receptacles is fused electro-deposited

tin for easy solderability, and protected

by a special lacquer for optimum shelf

life. The lacquer will not interfere with

any soldering operation.

Low temperature solder should be used

and the addition of a solder fillet at

arrow points on drawing at right is rec-

ommended. Care must be taken that

the operating temperature of the final

assembly does not rise above the melt-

Shell

Size

N

Max.

6

8

.458

.582

10

12

14

16

18

20

22

.692

.801

JAM NUT

BOX

SOLDER

RECEPTACLE

.926

CUT-OUT

RECEPTACLE

(See dimensions

above)

RECEPTACLE

(See dimensions

above)

1.051

1.176

1.395

1.375

77

Othe r Amphe nol Miniature Cylindrical

Conne c tors

MIL-C-26482, Series 2

MIL-C-26482, Series 2 connectors are provided with the Amphe-

nol^®/Matrix^®family of miniature cylindricals These are bayonet

coupling type, and they feature crimp contacts that are rear insert-

able and rear releasable.

There are six shell styles available and 34 insert arrangements.

Military part numbers of the Matrix MIL-C-26482 family include the

following:

MS3470 wall mounting receptacle with narrow flange

MS3472 wall mounting receptacle with wide flange

MS3471 cable connecting receptacle

MS3474 jam nut receptacle

MS3476 straight plug

MS3475 plug with RFI grounding fingers

See catalog 12-071 for more information.

Geophysical Miniature Cylindricals

MIL-C-26482

Designed for the Geophysical industry’s rugged environments, the

Series 2

Amphenol^®Geophysical Series connector has custom features

that provide reliability in extreme temperature and moisture condi-

tions.

The unique shell design provides stronger shells along with an

anodized (nonconductive) finish for greater salt, corrosion and

abrasion resistance. Coupling nuts are manufactured with round

detent holes and are sold separately for greater customer flexibil-

ity. See product data sheet #146.

RJ Field Bayonet MIL-C-26482 Cylindricals

Amphenol PCD division provides MIL-C-26482 bayonet coupling

cylindrical connectors with an RJ45 Ethernet interface*. These are

Geophysical

Miniature Cylindricals

designed for use in all levels of harsh environments from industrial

to mil-aero applications providing IP67 protection from dust, fluids,

vibration, shock and traction. The Amphenol^®RJ Field allows the

use of Ethernet Class D/Cat 5 and Cat 5e connections for 10

BaseT, 100 Base TX, or 1000 BaseT networks. It works with any

standard RJ45 cordset with no extra tooling. It also offers rein-

forced EMI protection.

For more information go online to www.rjfield.com or ask for the

Field Series brochure.

*

Other Field Series products are available through Amphenol PCD. These include

RJF TV within MIL-DTL-38999 Series III threaded coupling connectors, and RJF

544 within ECTA push-pull plastic shell coupling.

RJ Field Bayonet

MIL-C-26482 Cylindricals

78


型号：	PT00A-12-10P(SR)
厂家：	Amphenol
描述：	MIL Series Connector, 10 Contact(s), Aluminum Alloy, Male, Solder Terminal, Receptacle 连接器
文件：	总80页 (文件大小：1799K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PT00A-12-10P(SR) [AMPHENOL]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E