AOZ8013 [AOS]
4-Line EMI Filter with Integrated ESD Protection; 4线EMI滤波器,集成ESD保护型号: | AOZ8013 |
厂家: | ALPHA & OMEGA SEMICONDUCTORS |
描述: | 4-Line EMI Filter with Integrated ESD Protection |
文件: | 总7页 (文件大小:328K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AOZ8013
4-Line EMI Filter with Integrated ESD Protection
General Description
Features
The AOZ8013 is an 4-line device integrating EMI filtering
with ESD protection for each line. It is designed to
suppress unwanted EMI/RFI signals and provide electro-
static discharge (ESD) protection in portable electronic
equipment. This state-of-the-art device utilizes AOS
• 4 lines for EMI filtering and ESD protection:
– Exceeds IEC 61000-4-2, level 4 (ESD) immunity test
– ±18kV (air discharge) and ±18kV (contact discharge)
2
• Trench Vertical Structure [TVS] ™ based technology
2
used to achieve excellent ESD clamping & filter
performance over the full operating display range
leading edge Trench Vertical Structure [TVS] ™
technology for superior clamping performance and filter
attenuation over the full operating display range. The
AOZ8013 has been optimized for protection of color LCD
displays and CCD camera lines in cellular phones and
other portable consumer electronic devices.
• Filter performance: -35db attenuation from 800MHz to
2.2GHz
• Low operating voltage: 5.0V
• Capacitance stability over wide range of voltages and
temperatures
The AOZ8013 consists of four identical circuits
comprised of TVS diodes for ESD protection, and a
resistor–capacitor network for EMI/RFI filtering.
• DFN package, 2.0 x 2.0mm
• Pb-free device
A series resistor value of 100¾ and a capacitance
value of 28pF are used to achieve -35dB minimum
attenuation from 800MHz to 2.2GHz. The TVS diodes
provide effective suppression of ESD voltages in excess
of ±18kV (air discharge) and ±18kV (contact discharge).
This exceeds IEC 61000-4-2, level 4 ESD immunity test.
• Green product
Applications
• EMI filtering and ESD protection for data lines
• LCD displays, camera interface, I/O interface
• Portable handheld devices, cell phones, PDA phones
The AOZ8013 comes in an RoHS compliant, 2.0mm x
2.0mm DFN package and is rated over a -40°C to +85°C
ambient temperature range.
Typical Application
D0
CH1
D1
CH2
LCD/Camera
Module
D2
CH3
D3
CH4
Figure 1.
www.aosmd.com
Rev. 1.8 August 2008
Page 1 of 7
AOZ8013
Ordering Information
Part Number
Ambient Temperature Range
-40°C to +85°C
Package
Environmental
AOZ8013DIL
DFN-8
RoHS Compliant
Green Product
All AOS Products are offering in packaging with Pb-free plating and compliant to RoHS standards.
Parts marked as Green Products (with “L” suffix) used reduced levels of Halogens, and are also RoHS compliant.
Please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information.
Pin Configuration
1
2
3
4
8
7
6
5
8
7
6
5
1
2
3
4
DFN-8
(Bottom View)
Top View
Pin Description
Pin Number
Pin Name
Pin Function
1, 8
2, 7
CH 1
CH 2
CH 3
CH 4
GND
Channel 1 Connections
Channel 2 Connections
Channel 3 Connections
Channel 4 Connections
Common Ground Connection
3, 6
4, 5
Exposed Pad
Rev. 1.8 August 2008
www.aosmd.com
Page 2 of 7
AOZ8013
Absolute Maximum Ratings
Exceeding the Absolute Maximum ratings may damage the device.
Parameter
Rating
Storage Temperature (TS)
-65°C to +150°C
±18kV
ESD Rating per IEC61000-4-2, contact(1)
ESD Rating per IEC61000-4-2, air(1)
ESD Rating per Human Body Model(2)
±18kV
±30kV
Notes:
1. IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = 330¾.
2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge = 1.5k¾.
Electrical Characteristics
TA = 25°C unless otherwise specified.
Symbol
Parameter
Conditions
Min. Typ. Max. Units
(3)(8)
VRWM
VBR
Reverse Working Voltage
5.0
8
V
V
Reverse Breakdown Volt-
age
IT = 1mA(4)
6
7
IR
Reverse Leakage Current
Signal Clamp Voltage
VRWM = 3.3V
0.1
µA
V
VCL
ILOAD = 12A, positive clamp(5)(6)
ILOAD = 12A, negative clamp(5)(6)
9.5
-8.5
RCH
fC
Total Series Resistance
Cut-off Frequency
IR = 20mA
85
100
90
115
¾
Measured with 50¾ source and 50¾ load
termination
MHz
Attenuation from 800MHz
to 2.2GHz
VR = 0V Measured with 50¾ source and 50¾
load termination
-35
-35
dB
dB
Attenuation from 800MHz
to 2.2GHz
VR = 5V Measured with 50¾ source and 50¾
load termination
Notes:
3. The working peak reverse voltage, VRWM, should be equal to or greater than the DC or continuous peak operating voltage level.
4. VBR is measured at the pulse test current IT.
5. Measurements performed using a 100ns Transmission Line Pulse (TLP) system.
6. Total capacitance is equal to 2 x CCH
.
7. Measured at 25°C, VR = 2.5V, f = 1.0MHz.
8. Guaranteed by design.
Rev. 1.8 August 2008
www.aosmd.com
Page 3 of 7
AOZ8013
Typical Performance Characteristics
Typical Line Capacitance vs. Reverse Bias Voltage
(Normalized to Capacitance @ 2.5V)
Insertion Loss Characteristics
0
2.0
-5
-10
-15
-20
-25
-30
-35
-40
-45
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
-50
0.0
1.0
1
10
100
1000
10000
2.0
3.0
4.0
5.0
Frequency (MHz)
Reverse Biased Voltage (V)
Analog Crosstalk
0
-20
Clamping Voltage vs. Peak Pulse Current
(tperiod = 100ns, tr = 1ns)
12
11
10
9
-40
8
-60
7
5
-80
4
3
-100
0
2
4
6
8
10
12
1
10
100
1000
10000
Peak Pulse Current, I (A)
PP
Frequency (MHz)
Typical Resistance over Temperature
Forward Voltage vs. Forward Current
108
(tperiod = 100ns, tr = 1ns)
10
8
106
104
102
6
100
98
4
2
96
0
94
0
2
4
6
8
10
12
92
Forward Current (A)
-40 -30 -20 -10
0
5
15 25 35 45 55 65 75 85
Temperature (°C)
Insertion Loss vs. DC Bias
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
DC Bias (Volts)
Rev. 1.8 August 2008
www.aosmd.com
Page 4 of 7
AOZ8013
Package Dimensions, DFN 2.0 x 2.0 8L
b
D
E
R
E1
E
L
D1
TOP VIEW
BOTTOM VIEW
c
A1
A
Seating
Plane
SIDE VIEW
Dimensions in millimeters
Dimensions in inches
Symbols Min. Nom. Max.
Symbols Min. Nom. Max.
A
A1
b
0.70
0.00
0.18
0.15
0.75
0.02
0.80
0.05
0.30
0.25
A
A1
b
0.028 0.030 0.031
0.000 0.001 0.002
0.007 0.010 0.012
0.006 0.008 0.010
0.079 BSC
RECOMMENDED LAND PATTERN
0.25
0.50
0.25
c
0.20
c
D
2.00 BSC
1.50
D
D1
E
1.35
0.75
0.20
1.60
1.00
0.40
D1
E
0.053 0.059 0.063
0.079 BSC
0.90 1.70
2.00 BSC
0.90
E1
e
E1
e
0.030 0.035 0.039
0.020 BSC
0.50 BSC
0.30
0.30
L
L
0.008 0.012 0.016
0.008
1.50
R
0.20
R
aaa
bbb
ccc
ddd
0.15
aaa
bbb
ccc
ddd
0.006
UNIT: mm
0.10
0.004
0.10
0.004
0.08
0.003
Notes:
1. Dimensions and tolerances conform to ASME Y14.5M-1994.
2. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
3. Dimension b applied to metallized terminal and is measured between 0.10mm and 0.30mm from the terminal tip. If the terminal
has the optional radius on the other end of the terminal, dimension b should not be measured in that radius area.
4. Coplanarity ddd applies to the terminals and all other bottom surface metallization.
Rev. 1.8 August 2008
www.aosmd.com
Page 5 of 7
AOZ8013
Tape and Reel Dimensions, DFN 2.0 x 2.0 8L
Carrier Tape
P2
P1
D0
D1
E1
K0
E2
E
B0
T
P0
A0
Feeding Direction
UNIT: mm
Package
A0
B0
K0
1.00
D0
D1
E
E1
E2
P0
P1
P2
T
DFN 2x2 2.25
0.05
2.25
0.05
1.50
1.00
8.00
1.75
3.50
0.05
4.00
0.10
4.00
0.10
2.00 0.254
0.10
0.05 +0.1/-0 0.25/-0 +0.30/-0.1 0.10
0.02
Reel
W1
S
R
K
M
N
H
UNIT: mm
Tape Size Reel Size
M
N
W1
H
S
K
R
8mm
ø180
ø180.00 60.0
0.50
8.4
13.0
0.20
1.5
Min.
13.5
Min.
3.0
0.50
0.50 +1.5/-0.0
Leader / Trailer
& Orientation
Trailer Tape
300mm Min.
Components Tape
Orientation in Pocket
Leader Tape
500mm Min.
Rev. 1.8 August 2008
www.aosmd.com
Page 6 of 7
AOZ8013
Package Marking
AOZ8013DIL
(2.0 x 2.0 DFN)
PNOA
YWLT
Assembly Location Code
Option Code
Part Number Code
Underline Denotes Green Code
Year & Week Code
Assembly Lot Code
This data sheet contains preliminary data; supplementary data may be published at a later date.
Alpha & Omega Semiconductor reserves the right to make changes at any time without notice.
LIFE SUPPORT POLICY
ALPHA & OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body or (b) support or sustain life, and (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of
the user.
2. A critical component in any component of a life
support, device, or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
Rev. 1.8 August 2008
www.aosmd.com
Page 7 of 7
相关型号:
©2020 ICPDF网 联系我们和版权申明