AT42QT1012 [ATMEL]
One-channel Toggle-mode Touch SensorIC with Power Management Functions; 单声道切换模式的触摸感觉的有电源管理功能
| 型号： | AT42QT1012 |
| 厂家： | 
ATMEL |
| 描述： | One-channel Toggle-mode Touch SensorIC with Power Management Functions |
| 文件： | 总6页 (文件大小：79K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Features
• Number of Keys:
– One toggle mode (touch-on/touch-off), plus programmable auto-off delay and
external cancel
– Configurable as either a single key or a proximity sensor
• Technology:
– Patented spread-spectrum charge-transfer (direct mode)
• Key outline sizes:
– 6 mm x 6 mm or larger (panel thickness dependent); widely different sizes and
One-channel
Toggle-mode
Touch Sensor
IC with Power
Management
Functions
shapes possible
• Electrode design:
– Solid or ring electrode shapes
• PCB Layers required:
– One
• Electrode materials:
– Etched copper, silver, carbon, Indium Tin Oxide (ITO)
• Electrode substrates:
– PCB, FPCB, plastic films, glass
• Panel materials:
– Plastic, glass, composites, painted surfaces (low particle density metallic paints
possible)
• Panel thickness:
AT42QT1012
– Up to 12 mm glass, 6 mm plastic (electrode size and Cs dependent)
• Key sensitivity:
– Settable via external capacitor (Cs)
• Interface:
– Digital output, active high or active low (hardware configurable)
• Moisture tolerance:
Summary
– Good
• Power:
– 1.8V ~ 5.5V; 32.5 µA at 1.8V
• Package:
– 6-pin SOT23-6 (3 x 3 mm) RoHS compliant
• Signal processing:
– Self-calibration, auto drift compensation, noise filtering
• Applications:
– Power switch replacement in countertop appliances, irons, battery powered toys,
heaters, lighting controls, automotive interior lighting, commercial and industrial
equipment such as soldering stations and cooking equipment
• Patents:
– QTouch® (patented charge-transfer method)
Note: This is a summary document.
A complete document is available.
For more information contact
www.atmel.com/touch.
9543CS–AT42–02/10
1. Pinout and Schematic
1.1
Pinout Configuration
OUT
VSS
1
2
3
6
5
4
TIME
VDD
SNS
SNSK
1.2
Pin Descriptions
Table 1-1.
Pin
Pin Listing
Name
Type
Comments
Output state. To switched circuit and output polarity selection
resistor (Rop)
1
OUT
O
2
3
Vss
P
Supply ground
SNSK
I/O
Sense pin. To Cs capacitor and to sense electrode
Sense pin. To Cs capacitor and multiplier configuration resistor
(Rm). Rm must be fitted and connected to either VSS or VDD.
4
5
6
SNS
Vdd
I/O
P
Power
Timeout configuration pin. Must be connected to either VSS,
VDD, OUT or an RC network.
TIME
I
I
Input only
Output only, push-pull
I/O
P
Input and output
Ground or power
O
2
AT42QT1012
9543CS–AT42–02/10
AT42QT1012
1.3
Schematic
Figure 1-1. Basic Circuit Configuration
(active high output, toggle on/off, no auto switch off)
Note: bypass capacitor to be tightly
wired between VDD and VSS and
kept close to pin 5.
VDD
5
SENSE
ELECTRODE
VDD
RS
1
3
OUT
SNSK
CS
4
SNS
Rop
6
TIME
VSS
2
2. Overview of the AT42QT1012
2.1
Introduction
The AT42QT1012 (QT1012) is a single key device featuring a touch on/touch off (toggle) output
with a programmable auto switch-off capability.
The QT1012 is a digital burst mode charge-transfer (QT™) sensor designed specifically for touch
controls. It includes all hardware and signal processing functions necessary to provide stable
sensing under a wide variety of changing conditions; only low cost, noncritical components are
required for operation. With its tiny low-cost SOT-23 package, this device can suit almost any
product needing a power switch or other toggle-mode controlled function, especially power
control of small appliances and battery-operated products.
A unique “green” feature of the QT1012 is the timeout function, which can turn off power after a
specified time delay ranging from minutes to an hour.
Like all QTouch® devices, the QT1012 features automatic self-calibration, drift compensation,
and spread-spectrum burst modulation in order to provide for the most reliable touch sensing
possible.
3
9543CS–AT42–02/10
Revision History
Revision No.
History
Revision A – August 2009
Revision B – September 2009
Revision CS – February 2010
Initial release for chip revision 2.4
Changes to Cs value.
Updated for chip revision 3.1
4
AT42QT1012
9543CS–AT42–02/10
AT42QT1012
Notes
5
9543CS–AT42–02/10
Headquarters
International
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Atmel Asia
Atmel Europe
Le Krebs
Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Unit 01-05 & 16, 19/F
BEA Tower, Millennium City 5
418 Kwun Tong Road
Kwun Tong
Kowloon
Hong Kong
8, Rue Jean-Pierre Timbaud
BP 309
78054 Saint-Quentin-en-
Yvelines Cedex
France
Tel: (852) 2245-6100
Fax: (852) 2722-1369
Tel: (33) 1-30-60-70-00
Fax: (33) 1-30-60-71-11
Touch Technology Division
1 Mitchell Point
Ensign Way
Hamble
Southampton
Hampshire SO31 4RF
United Kingdom
Tel: (44) 23-8056-5600
Fax: (44) 23-8045-3939
Product Contact
Web Site
Technical Support
Sales Contact
www.atmel.com
touch@atmel.com
www.atmel.com/contacts
Literature Requests
www.atmel.com/literature
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND
CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR
STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL,
PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR
LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the
right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information
contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are
not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
© 2010 Atmel Corporation. All rights reserved. Atmel®, Atmel logo and combinations thereof, QTouch® and others are registered trademarks,
QT™ and others are trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be registered trademarks or
trademarks of others.
9543CS–AT42–02/10
相关型号：
©2020 ICPDF网 联系我们和版权申明