HFBR-4505 [AVAGO]
Plastic Optical Fiber Cable and Accessories for Versatile Link Telecommunications switching systems; 塑料光纤电缆和附件多功能连接电信交换系统
| 型号： | HFBR-4505 |
| 厂家： | 
AVAGO TECHNOLOGIES LIMITED |
| 描述： | Plastic Optical Fiber Cable and Accessories for Versatile Link Telecommunications switching systems |
| 文件： | 总10页 (文件大小：267K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HFBR-RXXYYY Series (POF)
HFBR-EXXYYY Series (POF)
Plastic Optical Fiber Cable and Accessories
for Versatile Link
Data Sheet
Cable Description
Features
•ꢀ CompatibleꢀwithꢀAvagoꢀVersatileꢀLinkꢀFamilyꢀofꢀcon-
nectorsꢀandꢀfiberꢀopticꢀcomponents
TheꢀHFBR-R/EXXYYYꢀseriesꢀofꢀplasticꢀfiberꢀopticꢀcablesꢀ
areꢀ constructedꢀ ofꢀ aꢀ singleꢀ step-indexꢀ fiberꢀ sheathedꢀ
inꢀaꢀblackꢀpolyethyleneꢀjacket.ꢀTheꢀduplexꢀfiberꢀconsistsꢀ •ꢀ 1ꢀmmꢀdiameterꢀPlasticꢀOpticalꢀFiberꢀ(POF)ꢀinꢀtwoꢀ
ofꢀtwoꢀsimplexꢀfibersꢀjoinedꢀwithꢀaꢀzipcordꢀweb.
grades:ꢀꢀlowꢀcostꢀstandardꢀPOFꢀwithꢀ0.22ꢀdB/mꢀtypicalꢀ
attenuation,ꢀorꢀhighꢀperformanceꢀextraꢀlowꢀlossꢀPOFꢀ
withꢀ0.19ꢀdB/mꢀtypicalꢀattenuation
StandardꢀattenuationꢀandꢀextraꢀlowꢀlossꢀPOFꢀcablesꢀareꢀ
identicalꢀexceptꢀforꢀattenuationꢀspecifications.
Polyethyleneꢀ jacketsꢀ onꢀ allꢀ plasticꢀ fiberꢀ cablesꢀ com-
plyꢀwithꢀULꢀVW-1ꢀflameꢀretardantꢀspecificationꢀ(ULꢀfileꢀ
#ꢀE89328).
Applications
•ꢀ Industrialꢀdataꢀlinksꢀforꢀfactoryꢀautomationꢀandꢀplantꢀ
control
•ꢀ Intra-systemꢀlinks;ꢀboard-to-board,ꢀrack-to-rack
•ꢀ Telecommunicationsꢀswitchingꢀsystems
•ꢀ Computer-to-peripheralꢀdataꢀlinks,ꢀPCꢀbusꢀextension
•ꢀ ProprietaryꢀLANs
Cablesꢀareꢀavailableꢀinꢀunconnectoredꢀorꢀconnectoredꢀ
options.ꢀ Referꢀ toꢀ theꢀ Orderingꢀ Guideꢀ forꢀ partꢀ numberꢀ
information.
500
400
300
•ꢀ Digitizedꢀvideo
•ꢀ Medicalꢀinstruments
•ꢀ Reductionꢀofꢀlightningꢀandꢀvoltageꢀtransientꢀsuscep-
tibility
•ꢀ Highꢀvoltageꢀisolation
200
100
620
640
660
680
700
λ – WAVELENGTH – nm
Figure 1. Typical POF attenuation vs. wavelength.
Plastic Optical Fiber Specifications:ꢀHFBR-R/EXXYYY
Absolute Maximum Ratings
Parameter
Symbol
Min.
-55ꢀ
Max.
+85ꢀ
+85ꢀ
+70ꢀ
50ꢀ
Unit
°C
Note
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
StorageꢀandꢀOperatingꢀTemperatureꢀ
RecommendedꢀOperatingꢀTemperatureꢀ
InstallationꢀTemperatureꢀ
TS,O
TOꢀ
TIꢀ
FTꢀ
FTꢀ
rꢀ
ꢀ
-40ꢀ
°C
-20ꢀ
°Cꢀ
1
2
ShortꢀTermꢀTensileꢀ
Force
ꢀ
ꢀ
ꢀꢀꢀꢀ ꢀꢀꢀSingleꢀChannelꢀ
DualꢀChannelꢀ
ꢀ
Nꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
25ꢀ
35ꢀ
ꢀ
100ꢀ
ꢀ
N
ShortꢀTermꢀBendꢀRadiusꢀ
LongꢀTermꢀBendꢀRadiusꢀ
LongꢀTermꢀTensileꢀLoadꢀ
Flexingꢀ
mmꢀ
mm
N
3,ꢀ4
4
rꢀ
ꢀ
FTꢀ
ꢀ
1ꢀ
ꢀ
1000ꢀ
Cyclesꢀ
Mechanical/Optical Characteristics, T ꢀ=ꢀ-40ꢀtoꢀ+85°Cꢀunlessꢀotherwiseꢀspecified.
A
Parameter
Symbol
Min.
Typ.[5]
Max.
Unit
Condition
ꢀ
ꢀ
Cableꢀ
Attenuationꢀ
StandardꢀCable,ꢀ
Typeꢀ"R"ꢀ
αOꢀ
ꢀ
0.15ꢀ
ꢀ
0.22ꢀ
ꢀ
0.27ꢀ
ꢀ
dB/mꢀ SourceꢀisꢀHFBR-15XXꢀ
ꢀ
(660ꢀmmꢀLED,ꢀ0.5ꢀNA)
ꢀ
ꢀ
ꢀ
ꢀ
ExtraꢀLowꢀLoss,ꢀ
Typeꢀ"E"
ꢀ
0.15ꢀ
0.19ꢀ
0.23ꢀ
ꢀ
ꢀ =ꢀ50ꢀmetersꢀ
ꢀ
ꢀ
Referenceꢀ
Attenuationꢀ
StandardꢀCable,ꢀ
Typeꢀ"R"ꢀ
αRꢀ
ꢀ
0.12ꢀ
ꢀ
0.19ꢀ
ꢀ
0.24ꢀ
ꢀ
dB/mꢀ Sourceꢀisꢀ650ꢀnm,ꢀ
ꢀ
0.5ꢀNAꢀmonochrometer,
ꢀ
ꢀ
ꢀ
ꢀ
ExtraꢀLowꢀLoss,ꢀ
Typeꢀ"E"ꢀ
ꢀ
ꢀ
0.12ꢀ
ꢀ
0.16ꢀ
ꢀ
0.19ꢀ
ꢀ
ꢀ
ꢀ
ꢀ =ꢀ50ꢀmetersꢀ
Noteꢀ7,ꢀFigureꢀ1
>2ꢀmeters
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
NumericalꢀApertureꢀ ꢀ
NAꢀ
DCꢀ
DJꢀ
l/vꢀ
ꢀ
0.46ꢀ
0.47ꢀ
1.00ꢀ
2.20ꢀ
5.0ꢀ
0.50ꢀ
ꢀ
Diameter,ꢀCoreꢀandꢀCladdingꢀ
Diameter,ꢀJacketꢀ
0.94ꢀ
1.06ꢀ
mm
mmꢀ
ꢀ
2.13ꢀ
2.27ꢀ
SimplexꢀCable
PropagationꢀDelayꢀConstantꢀ
MassꢀperꢀUnitꢀLength/Channelꢀ
CableꢀLeakageꢀCurrentꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ns/mꢀ Noteꢀ6
5.3ꢀ
g/mꢀ
nAꢀ
WithoutꢀConnectors
50ꢀkV,ꢀꢀ =ꢀ0.3ꢀmeters
ILꢀ
12ꢀ
RefractiveꢀIndexꢀ
ꢀ
Coreꢀ
nꢀ
1.492
1.417
Claddingꢀ
ꢀ
Notes:
1.ꢀꢀInstallationꢀtemperatureꢀisꢀtheꢀrangeꢀoverꢀwhichꢀtheꢀcableꢀcanꢀbeꢀbentꢀandꢀpulledꢀwithoutꢀdamage.ꢀBelowꢀ-20°Cꢀtheꢀcableꢀbecomesꢀbrittleꢀ
andꢀshouldꢀnotꢀbeꢀsubjectedꢀtoꢀmechanicalꢀstress.
2.ꢀꢀShortꢀTermꢀTensileꢀForceꢀisꢀforꢀlessꢀthanꢀ30ꢀminutes.
3.ꢀꢀShortꢀTermꢀBendꢀRadiusꢀisꢀforꢀlessꢀthanꢀ1ꢀhourꢀnonoperating.
4.ꢀꢀ90°ꢀbendꢀonꢀ25ꢀmmꢀradiusꢀmandrel.ꢀBendꢀradiusꢀisꢀtheꢀradiusꢀofꢀtheꢀmandrelꢀaroundꢀwhichꢀtheꢀcableꢀisꢀbent.
5.ꢀꢀTypicalꢀdataꢀareꢀatꢀ25°C.
6.ꢀꢀPropagationꢀdelayꢀconstantꢀisꢀtheꢀreciprocalꢀofꢀtheꢀgroupꢀvelocityꢀforꢀpropagationꢀdelayꢀofꢀopticalꢀpower.ꢀGroupꢀvelocityꢀisꢀv=c/nꢀwhereꢀcꢀisꢀ
theꢀvelocityꢀofꢀlightꢀinꢀfreeꢀspaceꢀ(3xl08ꢀm/s)ꢀandꢀnꢀisꢀtheꢀeffectiveꢀcoreꢀindexꢀofꢀrefraction.
7.ꢀꢀNoteꢀthatꢀαRꢀrisesꢀatꢀtheꢀrateꢀofꢀaboutꢀ0.0067ꢀdB/°C,ꢀwhereꢀtheꢀthermalꢀriseꢀrefersꢀtoꢀtheꢀLEDꢀtemperatureꢀchangesꢀaboveꢀ25°C.ꢀPleaseꢀreferꢀtoꢀ
Figureꢀ1ꢀwhichꢀshowsꢀtheꢀtypicalꢀplasticꢀopticalꢀfiberꢀattenuationꢀversusꢀwavelengthꢀatꢀ25°C.
2
Four
connector
styles
are
available
for
termination
ofplasticꢀ
compatible
with
dual
combinations
of
horizontal
orverticalꢀ
ConnectoringꢀInstructions
for
more
detail).
Theconnectorsꢀ
The
tionꢀforꢀapplicationsꢀthatꢀrequireꢀaꢀcomponent-to-connec-
torꢀretentionꢀforceꢀofꢀ8ꢀNewtonsꢀ(1.8ꢀlb.).Theseꢀconnectorsꢀ
simplex
connector
provides
a
quick
and
stable
connec-
nonlatchingꢀduplexꢀconnector.Whenꢀinsertingꢀtheꢀduplexꢀ
connector.Whenꢀinsertingꢀtheꢀsimplexꢀlatchingꢀconnectorꢀ
lineꢀspliceꢀusingꢀtwoꢀsimplexꢀconnectors.Theꢀadaptersꢀareꢀ
Plastic Fiber Connector Styles
Connector Description
DUPLEX CONNECTOR STYLES
HFBR-4506 – Duplex
opticalꢀfiber:ꢀsimplex,ꢀsimplexꢀlatching,ꢀduplexꢀandꢀduplexꢀ
latching.ꢀAllꢀconnectorsꢀprovideꢀaꢀsnap-inꢀactionꢀwhenꢀ
matedꢀtoꢀVersatileꢀLinkꢀcomponents.ꢀSimplexꢀconnectorsꢀ
areꢀcolorꢀcodedꢀtoꢀfacilitateꢀidentificationꢀofꢀtransmitterꢀ
andꢀreceiverꢀconnections.ꢀDuplexꢀconnectorsꢀareꢀkeyedꢀ
soꢀthatꢀproperꢀorientationꢀisꢀensuredꢀduringꢀinsertion.ꢀIfꢀ
theꢀPOFꢀcable/connectorꢀwillꢀbeꢀusedꢀatꢀextremeꢀoperat-
ingꢀtemperaturesꢀorꢀexperienceꢀfrequentꢀandꢀwideꢀtem-
peratureꢀcyclingꢀeffects,ꢀtheꢀcable/connectorꢀattachmentꢀ
canꢀbeꢀstrengthenedꢀwithꢀanꢀRTVꢀadhesiveꢀ(seeꢀPlasticꢀ
HFBR-4526
Duplexꢀ connectorsꢀ provideꢀ convenientꢀ duplexꢀ cableꢀ
terminationꢀandꢀareꢀkeyedꢀtoꢀpreventꢀincorrectꢀinsertionꢀ
intoꢀduplexꢀconfiguredꢀmodules.ꢀTheꢀduplexꢀconnectorꢀisꢀ
VersatileꢀLinkꢀcomponentsꢀ(e.g.,ꢀtwoꢀhorizontalꢀtransmit-
ters,ꢀtwoꢀverticalꢀreceivers,ꢀaꢀhorizontalꢀtransmitterꢀwithꢀaꢀ
horizontalꢀreceiver,ꢀetc.).Theꢀduplexꢀnon-latchingꢀconnec-
areꢀmadeꢀofꢀaꢀflameꢀretardantꢀVALOXꢀUL94ꢀV-0ꢀmaterialꢀ
(ULꢀfileꢀ#ꢀE121562).
torꢀisꢀavailableꢀinꢀparchment,ꢀoff-whiteꢀ(HFBR-4506).
SIMPLEX CONNECTOR STYLES
HFBR-4501/4511 – Simplex
HFBR-4516 – Duplex Latching
, HFBR-4525
DUPLEX
CRIMP RING
HFBR-4526
areꢀavailableꢀinꢀgrayꢀ(HFBR-4501)ꢀorꢀblueꢀ(HFBR-4511).
Theꢀduplexꢀlatchingꢀconnectorꢀisꢀdesignedꢀforꢀruggedꢀ
applicationsꢀrequiringꢀgreaterꢀretentionꢀforceꢀthanꢀtheꢀ
HFBR-4503/4513 – Simplex Latching
latchingꢀconnectorꢀintoꢀaꢀmodule,ꢀtheꢀconnectorꢀlatchꢀ
mechanismꢀshouldꢀbeꢀalignedꢀwithꢀtheꢀtopꢀsurfaceꢀofꢀtheꢀ
dualꢀcombinationꢀofꢀhorizontalꢀorꢀverticalꢀVersatileꢀLinkꢀ
components.ꢀTheꢀduplexꢀlatchingꢀconnectorꢀisꢀavailableꢀ
inꢀgrayꢀ(HFBR-4516).
HFBR-4525
Theꢀsimplexꢀlatchingꢀconnectorꢀisꢀdesignedꢀforꢀruggedꢀ
applicationsꢀrequiringꢀaꢀgreaterꢀretentionꢀforceꢀ—ꢀ80ꢀNew-
tonsꢀ(ꢀ18ꢀlb.)ꢀ—ꢀthanꢀprovidedꢀbyꢀaꢀsimplexꢀnonlatchingꢀ
Feedthrough/Splice
HFBR-4505/4515 Bulkhead Adapter
intoꢀaꢀmodule,ꢀtheꢀconnectorꢀlatchꢀmechanismꢀshouldꢀbeꢀ
alignedꢀwithꢀtheꢀtopꢀsurfaceꢀofꢀtheꢀhorizontalꢀmodules,ꢀ
orꢀwithꢀtheꢀtallꢀverticalꢀsideꢀofꢀtheꢀverticalꢀmodules.ꢀMis-
alignmentꢀofꢀanꢀinsertedꢀlatchingꢀconnectorꢀintoꢀeitherꢀ
moduleꢀwillꢀnotꢀresultꢀinꢀaꢀpositiveꢀlatch.ꢀTheꢀconnectorꢀisꢀ
releasedꢀbyꢀdepressingꢀtheꢀrearꢀsectionꢀofꢀtheꢀconnectorꢀ
lever,ꢀandꢀthenꢀpullingꢀtheꢀconnectorꢀassemblyꢀawayꢀfromꢀ
theꢀmoduleꢀhousing.
TheꢀHFBR-4505/4515ꢀadapterꢀmatesꢀtwoꢀsimplexꢀconnec-
torsꢀforꢀpanel/bulkheadꢀfeedthroughꢀofꢀHFBR-4501/4511ꢀ
terminatedꢀplasticꢀfiberꢀcable.ꢀMaximumꢀpanelꢀthicknessꢀ
isꢀ4.1ꢀmmꢀ(0.16ꢀinch).ꢀThisꢀadapterꢀcanꢀserveꢀasꢀaꢀcableꢀin-
Theꢀsimplexꢀlatchingꢀconnectorꢀisꢀavailableꢀinꢀgrayꢀ(HFBR-
4503)ꢀorꢀblueꢀ(HFBR-4513).
availableꢀinꢀgrayꢀ(HFBR-4505)ꢀandꢀblueꢀ(HFBR-4515).ꢀThisꢀ
adapterꢀisꢀnotꢀcompatibleꢀwithꢀPOFꢀduplex,ꢀPOFꢀsimplexꢀ
latching,ꢀorꢀHCSꢀconnectors.
3
Plastic Optical Fiber Connector Absolute Maximum Ratings
Parameter
Symbol
Min.
-40ꢀ
-40ꢀ
0ꢀ
Max.
85ꢀ
Unit
°Cꢀ
Noteꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
StorageꢀandꢀOperatingꢀTemperatureꢀ
RecommendedꢀOperatingꢀTemperatureꢀ
InstallationꢀTemperatureꢀ
NutꢀTorqueꢀ
TS,O
TOꢀ
Tlꢀ
ꢀ
1
1
1
2
85ꢀ
°Cꢀ
70ꢀ
°Cꢀ
TNꢀ
ꢀ
ꢀ
0.7ꢀ
100ꢀ
N-mꢀ
OzF-in.
HFBR-4505/4515ꢀAdapter
ꢀ
ꢀ
Notes:
1.ꢀꢀStorageꢀandꢀOperatingꢀTemperaturesꢀreferꢀtoꢀtheꢀrangesꢀoverꢀwhichꢀtheꢀconnectorsꢀcanꢀbeꢀusedꢀwhenꢀnotꢀsubjectedꢀtoꢀmechanicalꢀstress.ꢀ
InstallationꢀTemperatureꢀrefersꢀtoꢀtheꢀrangesꢀoverꢀwhichꢀconnectorsꢀmayꢀbeꢀinstalledꢀontoꢀtheꢀfiberꢀandꢀoverꢀwhichꢀconnectorsꢀcanꢀbeꢀcon-
nectedꢀandꢀdisconnectedꢀfromꢀtransmitterꢀandꢀreceiverꢀmodules.
2.ꢀꢀRecommendedꢀnutꢀtorqueꢀisꢀ0.57ꢀN-m.
Plastic Optical Fiber Connector Mechanical/Optical Characteristics
T ꢀ=ꢀ-40ꢀtoꢀ+85°C,ꢀUnlessꢀOtherwiseꢀSpecified.
A
ꢀ Parameter
Part Number
Symbol
Min.
Typ.[1]
Max.
Units
Temp. °C
Note
ꢀ RetentionꢀForce,ꢀ
ꢀ Connectorꢀtoꢀ
Simplex,ꢀ
HFBR-4501/4511ꢀ
FR-C
ꢀ
ꢀ
7ꢀ
3ꢀ
8ꢀ
ꢀ
ꢀ
ꢀ
Nꢀ
ꢀ
+25ꢀ
-40ꢀtoꢀ+85
2ꢀ
VersatileꢀLinkꢀTransmit-
tersꢀandꢀReceivers
SimplexꢀLatching,ꢀ
HFBR-4503/4513ꢀ
47ꢀ
11ꢀ
80ꢀ
ꢀ
ꢀ
ꢀ
+25ꢀ
-40ꢀtoꢀ+85
Duplex,ꢀ
HFBR-4506ꢀ
7ꢀ
4ꢀ
12ꢀ
ꢀ
ꢀ
ꢀ
+25ꢀ
-40ꢀtoꢀ+85
ꢀ ꢀ
DuplexꢀLatching,ꢀ
HFBR-4516ꢀ
ꢀ
ꢀ
50ꢀ
15ꢀ
80ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
+25ꢀ
-40ꢀtoꢀ+85
ꢀ TensileꢀForce,ꢀ
Simplex,ꢀ
FTꢀ
8.5ꢀ
22ꢀ
ꢀ
Nꢀ
ꢀ
3ꢀ
ꢀ ConnectorꢀtoꢀCableꢀ
HFBR-4501/4511
SimplexꢀLatching,ꢀ
HFBR-4503/4513
8.5ꢀ
22ꢀ
Duplex,ꢀHFBR-4506ꢀ
14ꢀ
14ꢀ
35
ꢀ ꢀ
DuplexꢀLatching,ꢀ
HFBR-4516
35ꢀ
ꢀ AdapterꢀConnectorꢀ
ꢀ toꢀConnectorꢀLossꢀ
HFBR-4505/4515ꢀwithꢀ
HFBR-4501/4511
α
CCꢀ
0.7ꢀ
1.5ꢀ
8ꢀ
2.8ꢀ
ꢀ
dBꢀ
Nꢀ
25ꢀ
ꢀ
4,ꢀ5ꢀ
6ꢀ
ꢀ RetentionꢀForceꢀ
ꢀ ConnectorꢀtoꢀAdapterꢀ
HFBR-4505/4515ꢀwithꢀ
HFBR-4501/4511
FR-B
FIꢀ
ꢀ
7ꢀ
ꢀ
ꢀ InsertionꢀForce,ꢀ
Simplex,ꢀ
HFBR-4501/4511
8ꢀ
30ꢀ
35ꢀ
Nꢀ
ConnectorꢀtoꢀVersatileꢀ
ꢀ ꢀ
LinkꢀTransmittersꢀandꢀ
Receiversꢀ
SimplexꢀLatching,ꢀ
HFBR-4503/4513
ꢀ
16ꢀ
Duplex,ꢀHFBR-4506ꢀ
ꢀ
ꢀ
13ꢀ
22ꢀ
46
ꢀ ꢀ
DuplexꢀLatchingꢀ
HFBR-4516
51ꢀ
Notes:
1.ꢀꢀTypicalꢀdataꢀareꢀatꢀ+25°C.
2.ꢀꢀNoꢀperceivableꢀreductionꢀinꢀretentionꢀforceꢀwasꢀobservedꢀafterꢀ2000ꢀinsertions.ꢀRetentionꢀforceꢀofꢀnon-latchingꢀconnectorsꢀisꢀlowerꢀatꢀelevatedꢀ
temperatures.ꢀLatchingꢀconnectorsꢀareꢀrecommendedꢀforꢀapplicationsꢀwhereꢀaꢀhighꢀretentionꢀforceꢀatꢀhighꢀtemperaturesꢀisꢀdesired.
3.ꢀꢀForꢀapplicationsꢀwhereꢀfrequentꢀtemperatureꢀcyclingꢀoverꢀtemperatureꢀextremesꢀisꢀexpected,ꢀpleaseꢀcontactꢀAvagoꢀTechnologiesꢀforꢀalternateꢀ
connectoringꢀtechniques.
4.ꢀꢀMinimumꢀandꢀmaximumꢀlimitꢀforꢀαCCꢀforꢀ0°Cꢀtoꢀ+70°Cꢀtemperatureꢀrange.ꢀTypicalꢀvalueꢀofꢀαCCꢀisꢀatꢀ+25°C.
5.ꢀꢀFactoryꢀpolishꢀorꢀfieldꢀpolishꢀperꢀrecommendedꢀprocedure.
6.ꢀꢀDestructiveꢀinsertionꢀforceꢀwasꢀtypicallyꢀatꢀ178ꢀNꢀ(40ꢀlb.).
4
Step-by-Step Plastic Cable Connectoring Instructions
Theꢀfollowingꢀstep-by-stepꢀguideꢀdescribesꢀhowꢀtoꢀtermi- Whenꢀusingꢀtheꢀduplexꢀconnectorꢀandꢀduplexꢀcable,ꢀtheꢀ
nateꢀplasticꢀfiberꢀopticꢀcable.ꢀItꢀisꢀidealꢀforꢀbothꢀfieldꢀandꢀ separatedꢀduplexꢀcableꢀmustꢀbeꢀstrippedꢀtoꢀequalꢀlengthsꢀ
factoryꢀ installation.ꢀ Connectorsꢀ canꢀ beꢀ easilyꢀ installedꢀ onꢀeachꢀcable.ꢀThisꢀallowsꢀeasyꢀandꢀproperꢀseatingꢀofꢀtheꢀ
onꢀcableꢀendsꢀwithꢀwireꢀstrippers,ꢀcuttersꢀandꢀaꢀcrimpingꢀ cableꢀintoꢀtheꢀduplexꢀconnector.
tool.
FinishingꢀtheꢀcableꢀisꢀaccomplishedꢀwithꢀtheꢀAvagoꢀꢀꢀ
HFBR-4593ꢀPolishingꢀKit,ꢀconsistingꢀofꢀaꢀPolishingꢀFixture,ꢀ
600ꢀgritꢀabrasiveꢀpaperꢀandꢀ3ꢀµmꢀpinkꢀlappingꢀfilmꢀ(3Mꢀ
Company,ꢀOC3-14).ꢀTheꢀconnectorꢀcanꢀbeꢀusedꢀimmedi-
atelyꢀafterꢀpolishing.
Materialsꢀneededꢀforꢀplasticꢀfiberꢀterminationꢀare:
1.ꢀꢀAvagoꢀ Plasticꢀ Opticalꢀ Fiberꢀ Cableꢀ (Example:ꢀ HFBR-
RUS500,ꢀ HFBR-RUD500,ꢀ HFBR-EUS500,ꢀ orꢀ HFBR-
EUD500)
Step 2
Placeꢀtheꢀcrimpꢀringꢀandꢀconnectorꢀoverꢀtheꢀendꢀofꢀtheꢀ
cable;ꢀtheꢀfiberꢀshouldꢀprotrudeꢀaboutꢀ3ꢀmmꢀ(0.12ꢀin.)ꢀ
throughꢀtheꢀendꢀofꢀtheꢀconnector.ꢀCarefullyꢀpositionꢀtheꢀ
ringꢀsoꢀthatꢀitꢀisꢀentirelyꢀonꢀtheꢀconnectorꢀwithꢀtheꢀrimꢀofꢀ
theꢀcrimpꢀringꢀflushꢀwithꢀtheꢀconnector,ꢀleavingꢀaꢀsmallꢀ
spaceꢀbetweenꢀtheꢀcrimpꢀringꢀandꢀtheꢀflange.ꢀThenꢀcrimpꢀ
theꢀringꢀinꢀplaceꢀwithꢀtheꢀcrimpingꢀtool.ꢀOneꢀcrimpꢀtoolꢀisꢀ
usedꢀforꢀallꢀPOFꢀconnectorꢀcrimpingꢀrequirements.
2.ꢀꢀIndustrialꢀRazorꢀBladeꢀorꢀWireꢀCutters
3.ꢀꢀ16ꢀ Gaugeꢀ Latchingꢀ Wireꢀ Strippersꢀ (Example:ꢀ Idealꢀ
StripmasterTMꢀtypeꢀ45-092).
4.ꢀꢀHFBR-4597ꢀCrimpingꢀTool
5.ꢀꢀHFBR-4593ꢀPolishingꢀKit
Forꢀ applicationsꢀ withꢀ extremeꢀ temperatureꢀ operationꢀ
orꢀ frequentꢀ temperatureꢀ cycling,ꢀ improvedꢀ connectorꢀ
toꢀcableꢀattachmentꢀcanꢀbeꢀachievedꢀwithꢀtheꢀuseꢀofꢀanꢀ
RTVꢀ(GEꢀCompany,ꢀRTV-128ꢀorꢀDowꢀCorningꢀ3145-RTV)ꢀ
adhesive.ꢀTheꢀRTVꢀisꢀplacedꢀintoꢀtheꢀconnectorꢀpriorꢀtoꢀ
insertionꢀofꢀtheꢀfiberꢀandꢀtheꢀfiberꢀisꢀcrimpedꢀnormally.ꢀ
TheꢀconnectorꢀcanꢀbeꢀpolishedꢀafterꢀtheꢀRTVꢀhasꢀcuredꢀ
andꢀisꢀthenꢀreadyꢀforꢀuse.
6.ꢀꢀOneꢀofꢀtheꢀfollowingꢀconnectors:
ꢀ
ꢀ
ꢀ
ꢀ
a)ꢀ HFBR-4501/4503ꢀ Grayꢀ Simplex/Simplexꢀ Latchingꢀ
ConnectorꢀandꢀHFBR-4525ꢀSimplexꢀCrimpꢀRing
b)ꢀ HFBR-4511/4513ꢀ Blueꢀ Simplex/Simplexꢀ Latchingꢀ
ConnectorꢀandꢀHFBR-4525ꢀSimplexꢀCrimpꢀRing
c)ꢀHFBR-4506ꢀParchmentꢀ(off-white)ꢀDuplexꢀConnectorꢀ
andꢀHFBR-4526ꢀDuplexꢀCrimpꢀRing
Note: By convention, place the gray connector on the trans
mittercableendandtheblueconnectoronthereceivercable
end to maintain color coding (different color connectors are
mechanically identical).
d)ꢀHFBR-4516ꢀGrayꢀLatchingꢀDuplexꢀConnectorꢀandꢀ
HFBR-4526ꢀDuplexꢀCrimpꢀRing
Step 1
Simplex connector crimp rings cannot be used with duplex
connectors and duplex connector crimp rings cannot be
used with simplex connectors because of size differences.
The simplex crimp has a dull luster appearance; the duplex
ring is glossy and has a thinner wall.
Theꢀzipꢀcordꢀstructureꢀofꢀtheꢀduplexꢀcableꢀpermitsꢀeasyꢀ
separationꢀofꢀtheꢀchannels.ꢀTheꢀchannelsꢀshouldꢀbeꢀsepa-
ratedꢀaꢀminimumꢀofꢀ100ꢀmmꢀ(4ꢀin)ꢀtoꢀaꢀmaximumꢀofꢀ150ꢀ
mmꢀ(6ꢀin)ꢀbackꢀfromꢀtheꢀendsꢀtoꢀpermitꢀconnectoringꢀ
andꢀpolishing.
Afterꢀ cuttingꢀ theꢀ cableꢀ toꢀ theꢀ desiredꢀ length,ꢀ stripꢀ o ꢀ
approximatelyꢀ7ꢀmmꢀ(0.3ꢀin.)ꢀofꢀtheꢀouterꢀjacketꢀwithꢀtheꢀ
16ꢀgaugeꢀwireꢀstrippers.ꢀExcessꢀwebbingꢀonꢀtheꢀduplexꢀ
cableꢀmayꢀhaveꢀtoꢀbeꢀtrimmedꢀtoꢀallowꢀtheꢀsimplexꢀorꢀ
simplexꢀlatchingꢀconnectorꢀtoꢀslideꢀoverꢀtheꢀcable.
5
Step 4
Placeꢀtheꢀflushꢀconnectorꢀandꢀpolishingꢀfixtureꢀonꢀtheꢀdullꢀ
sideꢀofꢀtheꢀ3ꢀµmꢀpinkꢀlappingꢀfilmꢀandꢀcontinueꢀtoꢀpolishꢀ
theꢀfiberꢀandꢀconnectorꢀforꢀapproximatelyꢀ25ꢀstrokes.ꢀTheꢀ
fiberꢀendꢀshouldꢀbeꢀflat,ꢀsmoothꢀandꢀclean.
Step 3
Thisꢀcableꢀisꢀnowꢀreadyꢀforꢀuse.
Anyꢀexcessꢀfiberꢀprotrudingꢀfromꢀtheꢀconnectorꢀendꢀmayꢀ
beꢀcutꢀoff;ꢀhowever,ꢀtheꢀtrimmedꢀfiberꢀshouldꢀextendꢀatꢀ
leastꢀ1.5ꢀmmꢀ(0.06ꢀin)ꢀfromꢀtheꢀconnectorꢀend.
Note:Useofthepinklappingfilmfinepolishingstepresultsin
approximately 2 dB improvement in coupling performance
of either a transmitterreceiver link or a bulkhead/splice over
a 600 grit polish alone. This fine polish is comparable to the
Avago factory polish. The fine polishing step may be omitted
where an extra 2 dB of optical power is not essential, as with
shortlinklengths. Properpolishingofthetipofthefiber/con
nector face results in a tip diameter between 2.5 mm (0.098
in.) minimum and 3.2 mm (0.126 in.) maximum..
Insertꢀtheꢀconnectorꢀfullyꢀintoꢀtheꢀpolishingꢀfixtureꢀwithꢀ
theꢀ trimmedꢀ fiberꢀ protrudingꢀ fromꢀ theꢀ bottomꢀ ofꢀ theꢀ
fixture.ꢀThisꢀplasticꢀpolishingꢀfixtureꢀcanꢀbeꢀusedꢀtoꢀpolishꢀ
twoꢀsimplexꢀconnectorsꢀorꢀsimplexꢀlatchingꢀconnectorsꢀ
simultaneously,ꢀorꢀoneꢀduplexꢀconnector.
Note: The four dots on the bottom of the polishing fixture
are wear indicators. Replace the polishing fixture when any
dot is no longer visible. Typically, the polishing fixture can
be used 10 times; 10 duplex connectors or 20 simplex con
nectors, two at a time.
HFBR-4593 Polishing Kit
Place the 600 grit abrasive paper on a flat smooth surface,
pressing down on the connector, polish the fiber and the
connector using a figure eight pattern of strokes until the
connector is flush with the bottom of the polishing fixture.
Wipe the connector and fixture with a clean cloth or tissue.
6
HFBR-RMD010ꢀis
Connectored,ꢀDuplex,ꢀ10ꢀmeterꢀcable.
a
Standard
Attenuation,
Standard
Duplexꢀ markingsꢀonꢀtheꢀduplexꢀfiberꢀcableꢀtoꢀdifferentiateꢀbe-
tweenꢀtheꢀchannel.
HFBR-RMD100ꢀis StandardAttenuation,
a
Standard
Duplexꢀ
Ordering Guide for POF Connectors and Accessories
Plastic Optical Fiber Connectors
HFBR-4501ꢀ
HFBR-4511ꢀ
HFBR-4503ꢀ
HFBR-4513ꢀ
HFBR-4506ꢀ
HFBR-4516ꢀ
HFBR-4505ꢀ
HFBR-4515ꢀ
GrayꢀSimplexꢀConnector/CrimpꢀRing
BlueꢀSimplexꢀConnector/CrimpꢀRing
GrayꢀSimplexꢀLatchingꢀConnectorꢀwithꢀCrimpꢀRing
BlueꢀSimplexꢀLatchingꢀConnectorꢀwithꢀCrimpꢀRing
ParchmentꢀDuplexꢀConnectorꢀwithꢀCrimpꢀRing
GrayꢀDuplexꢀLatchingꢀConnectorꢀwithꢀCrimpꢀRing
GrayꢀAdapterꢀ(Bulkhead/Feedthrough)
BlueꢀAdapterꢀ(Bulkhead/Feedthrough)
Plastic Optical Fiber Accessories
HFBR-4522ꢀ
HFBR-4525ꢀ
HFBR-4526ꢀ
HFBR-4593ꢀ
ꢀ
500ꢀHFBR-0500ꢀProductsꢀPortꢀPlugs
1000ꢀSimplexꢀCrimpꢀRings
500ꢀDuplexꢀCrimpꢀRings
PolishingꢀKitꢀ(oneꢀpolishingꢀtool,ꢀtwoꢀpiecesꢀ600ꢀgritꢀ
abrasiveꢀpaper,ꢀandꢀtwoꢀpiecesꢀ3ꢀµmꢀpinkꢀlappingꢀfilm)ꢀ
PlasticꢀFiberꢀCrimpingꢀTool
HFBR-4597ꢀ
Ordering Guide for POF Cable
Cable Length Tolerances:
ForꢀExample:
Theꢀplasticꢀcableꢀlengthꢀtolerancesꢀare:ꢀ+10%/-0%.
HFBR-RUD500ꢀisꢀaꢀStandardꢀAttenuation,ꢀUnconnectored,ꢀ NOTE: Byꢀconvention,ꢀpre-connectoredꢀsimplexꢀPOFꢀca-
Duplex,ꢀ500ꢀmeterꢀcable.
blesꢀhaveꢀgrayꢀandꢀblueꢀcoloredꢀconnectorsꢀonꢀtheꢀop-
positeꢀendsꢀofꢀtheꢀsameꢀfiber;ꢀalthoughꢀoppositelyꢀcol-
ored,ꢀtheꢀconnectorsꢀareꢀmechanicallyꢀidentical.ꢀDuplexꢀ
POFꢀ cablesꢀ withꢀ duplexꢀ connectorsꢀ useꢀ color-ꢀ codedꢀ
HFBR-RLS001ꢀisꢀaꢀStandardꢀAttenuation,ꢀLatchingꢀSimplexꢀ
Connectored,ꢀSimplex,ꢀ1ꢀmeterꢀcable.
Connectored,ꢀDuplex,ꢀ100ꢀmeterꢀcable.
HFBR-
Length Codeꢀ
Cable Code
(measuredꢀfromꢀtipꢀofꢀconnectorꢀtoꢀtipꢀofꢀ
connector)
Rꢀ=ꢀStandardꢀAttenuationꢀPOF
Eꢀ=ꢀExtraꢀLowꢀLossꢀPOF
1-500ꢀmetersꢀinꢀ1ꢀmeterꢀincrementsꢀ
e.g.ꢀ015ꢀ=ꢀ15ꢀmeters
1-10ꢀmetersꢀinꢀ1ꢀdecimeterꢀincrementsꢀꢀ
e.g.ꢀ15Dꢀ=ꢀ1.5ꢀmeters
Connector Code
Uꢀ=ꢀUnconnectored
Nꢀ=ꢀStandardꢀSimplexꢀConnectors
Lꢀ=ꢀLatchingꢀSimplexꢀConnectors
Mꢀ=ꢀStandardꢀDuplexꢀConnectors
Tꢀ=ꢀLatchingꢀDuplexꢀConnectors
Channel Code
Sꢀ=ꢀSimplexꢀCable
Dꢀ=ꢀDuplexꢀZipcordꢀCable
Note:ꢀNotꢀallꢀpossibleꢀcombinationsꢀreflectꢀavailableꢀpartꢀnumbers.ꢀꢀ
PleaseꢀcontactꢀyourꢀlocalꢀAvagoꢀrepresentativeꢀforꢀaꢀlistꢀofꢀcurrentꢀavailableꢀcableꢀpartꢀnumbers.
7
Connector Applications
Attachment to Avago Versatile Link Fiber Optic Components
Bulkhead Feedthrough or Panel Mounting for HFBR-4501/4511 Simplex Connectors
8
Versatile Link Mechanical Dimensions
Fiber Optic Cable Dimensions
Panel Mounting – Bulkhead Feedthrough
1.0 POF
(0.039)
0.230 HCS
(0.009)
HFBR-4505 (Gray)/4515 (Blue) Adapters
Bulkhead Feedthrough with Two HFBR-4501/4511 Connectors
Allꢀdimensionsꢀinꢀmmꢀ(inches).
Allꢀdimensionsꢀ 0.25ꢀmmꢀunlessꢀotherwiseꢀspecified.
9
Versatile Link Mechanical Dimensions, continued
HFBR-4516 (Parchment) Duplex Latching Connector
HFBR-4506 (Parchment) Duplex Connector
HFBR-4503 (Gray)/4513 (Blue) Simplex Latching Connector
HFBR-4501 (Gray)/4511 (Blue) Simplex Connector
Allꢀdimensionsꢀinꢀmmꢀ(inches).
Allꢀdimensionsꢀ 0.25ꢀmmꢀunlessꢀotherwiseꢀspecified.
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2009 Avago Technologies. All rights reserved. Obsoletes 5988-3625EN
AV02-1848EN - March 31, 2009
相关型号：
HFBR-4506
Plastic Optical Fiber Cable and Accessories for Versatile Link Telecommunications switching systems
AVAGO
HFBR-4511
Plastic Optical Fiber Cable and Accessories for Versatile Link Telecommunications switching systems
AVAGO
HFBR-4513
Plastic Optical Fiber Cable and Accessories for Versatile Link Telecommunications switching systems
AVAGO
©2020 ICPDF网 联系我们和版权申明