首页 |元器件品牌

HLMA-QL00-PR034 [AVAGO]

T-3/4 SINGLE COLOR LED, AMBER, 1.78mm, PLASTIC PACKAGE-2;
HLMA-QL00-PR034
型号： HLMA-QL00-PR034
厂家： AVAGO TECHNOLOGIES LIMITED    AVAGO TECHNOLOGIES LIMITED
描述：

T-3/4 SINGLE COLOR LED, AMBER, 1.78mm, PLASTIC PACKAGE-2

光电
文件： 总9页 (文件大小：70K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
HLMA-Qx00, HLMA-Px00 HLMT-Px00 and HLMT-Qx00  
Subminiature High Performance AlInGaP LED Lamps  
Data Sheet  
SunPower Series  
HLMA-PF00, HLMA-PG00, HLMA-PH00, HLMA-PL00, HLMA-QF00, HLMA-QG00, HLMA-QH00,  
HLMA-QL00, HLMT-PG00, HLMT-PH00, HLMT-PL00, HLMT-QG00, HLMT-QH00, HLMT-QL00  
Description  
Features  
Subminiature flat top package  
Ideal for backlighting and light piping applications  
Flat Top Package  
The HLMX-PXXX flat top lamps use an untinted, nondif-  
fused, truncated lens to provide a wide radiation pattern  
that is necessary for use in backlighting applications. The  
flat top lamps are also ideal for use as emitters in light  
pipe applications.  
Subminiature dome package  
Nondiffused dome for high brightness  
Wide range of drive currents  
Colors: 590 nm Amber, 605 nm Orange, 615nm Red-  
dish-Orange, 622/626 nm Red, and 635 nm Red  
Dome Packages  
Ideal for space limited applications  
Axial leads  
Available with lead configurations for surface mount  
and through hole PC board mounting  
The HLMX-QXXX dome lamps use an untinted, nondif-  
fused lens to provide a high luminous intensity within a  
narrow radiation pattern.  
Lead Configurations  
Technology  
All of these devices are made by encapsulating LED chips  
on axial lead frames to form molded epoxy submini-  
ature lamp packages. A variety of package configuration  
options is available. These include special surface mount  
lead configurations, gull wing, yoke lead, or Z-bend. Right  
angle lead bends at 2.54 mm (0.100 inch) and 5.08 mm  
(0.200 inch) center spacing are available for through hole  
mounting. For more information refer to Standard SMT  
and Through Hole Lead Bend Options for Subminiature  
LED Lamps data sheet.  
These subminiature solid state lamps utilize one of the  
two newly developed aluminum indium gallium phos-  
phide (AlInGaP) LED technologies. The HLMT-Devices  
are especially effective in very bright ambient lighting  
conditions. The colors 590 nm amber, 605 nm orange,  
615nm reddish-orange, 622/626 nm red, and 635 nm red  
are available with viewing angles of 15° for the domed  
devices and 125° for the flat top devices.  
Device Selection Guide  
d  
(nm)  
Typ. IV  
(mcd)  
Package  
Description  
Domed,  
Viewing  
Angle 21/2  
15°  
Package  
Outline  
B
Part Number  
HLMA-QL00  
HLMT-QL00  
HLMA-QJ00  
HLMA-QH00  
HLMT-QH00  
HLMA-QG00  
HLMT-QG00  
HLMA-QF00  
HLMA-PL00  
HLMT-PL00  
HLMA-PJ00  
HLMA-PH00  
HLMT-PH00  
HLMA-PG00  
HLMT-PG00  
HLMA-PF00  
590  
590  
605  
615  
615  
626  
622  
635  
590  
590  
605  
615  
615  
626  
622  
635  
500  
1000  
500  
500  
800  
500  
1000  
500  
75  
Nondiffused,  
Untinted  
Flat Top,  
125°  
A
150  
75  
Nondiffused,  
Untinted  
75  
120  
75  
150  
75  
Absolute Maximum Ratings at TA = 25°C  
Parameter  
Peak Forward Current[2]  
Average Forward Current (IPEAK = 100 mA)[1,2]  
DC Forward Current[3,5,6]  
HLMA-xxxx  
HLMT-xxxx  
100  
Unit  
mA  
mA  
mA  
mW  
V
100  
30  
30  
50  
50  
Power Dissipation  
120  
130  
Reverse Voltage (IR = 100 μA)  
Transient Forward Current (10 μs Pulse)[5]  
Operating Temperature Range  
Storage Temperature Range  
LED Junction Temperature  
5
500  
mA  
°C  
–40 to +100  
–55 to +100  
110  
°C  
°C  
Lead Soldering Temperature [1.6 mm (0.063 in.) from body]  
SMT Reflow Soldering Temperature  
260°C for 5 seconds  
260°C for 20 seconds  
Notes:  
1. Maximum IAVG at f = 1 kHz.  
2. Refer to Figure 5 to establish pulsed operating conditions.  
3. Derate linearly as shown in Figure 4.  
4. The transient peak current is the maximum non-recurring peak current these devices can withstand without damaging the LED die and wire  
bonds. Operation at currents above Absolute Maximum Peak Forward Current is not recommended.  
5. Drive currents between 10 mA and 30 mA are recommended for best long term performance.  
6. Operation at currents below 5 mA is not recommended, please contact your Avago sales representative.  
2
Part Numbering System  
HLMx - x x 00 - x x x xx  
Packaging Option  
00: Straight Leads, Bulk Packaging, Quantity of 500 parts  
11: Gull Wing Bend, Tape & Reel – 7" Reel  
12: Gull Wing Bend, Bulk  
14: Gull Wing Bend, Tape & Reel – 13" Reel  
21: Yoke Bend, Tape and Reel – 7" Reel  
22: Yoke Bend, Bulk  
24: Yoke Bend, Tape and Reel – 13" Reel  
31: Z-Bend, Tape and Reel – 7" Reel  
32: Z-Bend, Bulk  
34: Z-Bend, Tape and Reel – 13" Reel  
Color Bin Selection  
0: Full Color Bin Distribution  
B: Color Bins 2 & 3  
K: Color Bins 2, 3 & 4  
R: Color Bins 2 & 4  
W: Color Bins 2, 4, 6 & 7  
X: Color Bins 4, 6 & 7  
Maximum Iv Bin Options  
Please refer to the Iv Bin Table  
Minimum Iv Bin Options  
Please refer to the Iv Bin Table  
Color Options  
L: Amber 590 nm  
J: Orange 605 nm  
H: Reddish Orange 615 nm  
G: Red 622/626 nm  
F: Red 635 nm  
Package Options  
Q: Dome  
P: Flat Top  
3
Package Dimensions  
(A) Flat Top Lamps  
(B) Domed Lamps, Diffused and Nondiffused  
1.40 (0.055)  
1.65 (0.065)  
0.50 (0.020) REF.  
0.50 (0.020) REF.  
11.68 (0.460)  
10.67 (0.420)  
BOTH SIDES  
11.68 (0.460)  
CATHODE  
CATHODE  
10.67 (0.420)  
BOTH SIDES  
0.46 (0.018)  
0.56 (0.022)  
ANODE  
0.46 (0.018)  
0.56 (0.022)  
ANODE  
1.65 (0.065)  
1.91 (0.075)  
1.65 (0.065)  
1.91 (0.075)  
DIA.  
DIA.  
0.25 (0.010) MAX.  
0.25 (0.010) MAX.  
NOTE 2  
NOTE 2  
0.20 (0.008) MAX.  
0.20 (0.008) MAX.  
2.21 (0.087)  
1.96 (0.077)  
0.76 (0.030)  
0.89 (0.035)  
R.  
2.21 (0.087)  
1.96 (0.077)  
0.18 (0.007)  
0.23 (0.009)  
0.94 (0.037)  
1.24 (0.049)  
2.03 (0.080)  
1.78 (0.070)  
1.14 (0.045)  
1.40 (0.055)  
0.63  
0.38  
(0.025)  
(0.015)  
2.92  
(0.115)  
MAX.  
2.44 (0.096)  
1.88 (0.074)  
0.63 (0.025)  
0.38 (0.015)  
0.79 (0.031)  
0.53 (0.021)  
0.79 (0.031) MAX.  
2.08 (0.082)  
2.34 (0.092)  
0.18 (0.007)  
0.23 (0.009)  
2.08 (0.082)  
2.34 (0.092)  
CATHODE  
STRIPE  
CATHODE  
STRIPE  
NOTES:  
1. ALL DIMENSIONS ARE IN MILLIMETRES (INCHES).  
2. PROTRUDING SUPPORT TAB IS CONNECTED TO CATHODE LEAD.  
Package Mounting  
CATHODE  
TAB  
NO. ANODE DOWN.  
YES. CATHODE DOWN.  
Proper right angle mounting to a PC board to prevent protruding cathode tab from shorting to anode connection.  
4
Optical Characteristics at TA = 25°C  
Color,  
Viewing  
Angle  
Luminous  
Efficacy  
v[5]  
(lm/w)  
Typ.  
Total Flux  
V (mlm)  
@ 20 mA[2]  
Typ.  
Peak  
Wavelength  
Dominant  
Wavelength  
d[3] (nm)  
Typ.  
Luminous Intensity  
IV (mcd) @ 20 mA[1]  
2 1/2  
peak (nm)  
Degrees[4]  
Typ.  
Part Number  
Min.  
160  
250  
250  
250  
250  
400  
400  
400  
250  
160  
160  
250  
400  
250  
1000  
160  
250  
250  
160  
25  
Typ.  
500  
–
Max.  
Typ.  
592  
592  
592  
592  
592  
592  
592  
592  
592  
609  
621  
621  
621  
621  
621  
635  
635  
635  
650  
592  
592  
592  
592  
592  
609  
621  
621  
635  
635  
640  
HLMA-QL00-S00xx  
HLMA-QL00-TU0xx  
HLMA-QL00-TUKxx  
HLMA-QL00-TVBxx  
HLMA-QL00-TVKxx  
HLMA-QL00-UV0xx  
HLMA-QL00-UVRxx  
HLMA-QL00-UWBxx  
HLMT-QL00-T00xx  
HLMA-QJ00-S00xx  
HLMA-QH00-S00xx  
HLMA-QH00-T00xx  
HLMA-QH00-UW0xx  
HLMT-QH00-T00xx  
HLMT-QH00-WX0xx  
HLMA-QG00-S00xx  
HLMA-QG00-TV0xx  
HLMT-QG00-T00xx  
HLMA-QF00-S00xx  
HLMA-PL00-N00xx  
HLMA-PL00-PRRxx  
HLMA-PL00-PRXxx  
HLMA-PL00-QRXxx  
HLMT-PL00-P0Wxx  
HLMA-PJ00-N00xx  
HLMA-PH00-N00xx  
HLMT-PH00-P00xx  
HLMA-PG00-N00xx  
HLMT-PG00-P00xx  
HLMA-PF00-N00xx  
–
250  
250  
250  
250  
250  
250  
250  
250  
800  
250  
250  
250  
250  
800  
800  
250  
250  
800  
250  
250  
250  
250  
250  
800  
250  
250  
800  
250  
800  
250  
590  
590  
590  
590  
590  
590  
590  
590  
590  
605  
615  
615  
615  
615  
615  
626  
626  
622  
635  
590  
590  
590  
590  
590  
605  
615  
615  
626  
622  
635  
15  
480  
480  
480  
480  
480  
480  
480  
480  
480  
370  
263  
263  
263  
263  
263  
150  
150  
150  
110  
480  
480  
480  
480  
480  
370  
263  
263  
150  
150  
110  
800  
800  
1250  
1250  
1250  
1250  
2000  
–
15  
–
15  
–
15  
–
15  
–
15  
–
15  
–
15  
1000  
500  
500  
500  
–
15  
–
15  
–
15  
–
15  
2000  
–
15  
500  
–
15  
3200  
–
15  
500  
–
15  
1250  
–
15  
1000  
500  
75  
–
15  
–
15  
–
125  
125  
125  
125  
125  
125  
125  
125  
125  
125  
125  
40  
200  
200  
200  
–
40  
–
63  
–
40  
150  
75  
75  
120  
75  
150  
75  
25  
–
25  
–
40  
–
25  
–
40  
–
25  
–
Notes:  
1. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be  
aligned with this axis.  
2. v is the total luminous flux output as measured with an integrating sphere.  
3. The dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the color of the device.  
4. 1/2 is the off-axis angle where the liminous intensity is 1/2 the peak intensity.  
5. Radiant intensity, Ie, in watts/steradian, may be calculated from the equation Ie = Iv/v, where Iv is the luminous intensity in candelas and v is  
the luminous efficacy in lumens/watt.  
5
Electrical Characteristics at TA = 25°C  
Forward Voltage  
VF (Volts)  
@ IF = 20mA  
Reverse Breakdown  
Voltage VR (Volts)  
@ IR = 100μA  
Thermal Resistance  
RθJ-PIN (°C/W)  
Part Number  
HLMA-Qx00  
HLMT-Qx00  
HLMA-Px00  
HLMT-Px00  
Typ.  
1.9  
2.0  
1.9  
2.0  
Max.  
2.4  
Min.  
5
Typ.  
25  
Typ.  
170  
170  
170  
170  
2.6  
5
20  
2.4  
5
25  
2.6  
5
20  
1.0  
0.5  
REDDISH  
ORANGE  
AMBER  
ORANGE  
RED 626 nm  
RED 635 nm  
0
550  
600  
650  
700  
WAVELENGTH – nm  
Figure 1. Relative intensity vs. wavelength.  
50  
40  
30  
20  
50  
40  
30  
20  
10  
10  
0
0
1.0  
1.5  
2.0  
2.5  
3.0  
1.0  
1.5  
2.0  
2.5  
3.0  
VF – FORWARD VOLTAGE – V  
VF - FORWARD VOLTAGE - V  
Figure 2a. Forward current vs. forward voltage. HLMA-xxxx.  
Figure 2b. Forward current vs. forward voltage. HLMT-xxxx.  
6
2.5  
2.0  
1.5  
4.0  
3.0  
2.0  
1.0  
0
1.0  
0.5  
0
0
10  
20  
30  
40  
50  
0
10  
20  
30  
40  
50  
60  
IF - DC FORWARD CURRENT - mA  
IF - DC FORWARD CURRENT - mA  
Figure 3a. Relative luminous intensity vs. DC forward current. HLMA-xxxx.  
Figure 3b. Relative luminous intensity vs. DC forward current. HLMT-xxxx.  
50  
40  
RTJ-A = 380 qC/W  
30  
RTJ-A = 476 qC/W  
20  
10  
0
0
20  
40  
60  
80  
100  
TA – AMBIENT TEMPERATURE – qC  
Figure 4. Maximum forward current vs. ambient temperature.  
50  
50  
f ≥ 1 KHz  
40  
40  
f ≥ 1 KHz  
f ≥ 300 Hz  
30  
30  
20  
10  
0
f ≥ 100 Hz  
20  
10  
0
50  
75  
100  
50  
58  
67  
75  
83  
92  
100  
IPEAK – PEAK FORWARD CURRENT – mA  
IPEAK – PEAK FORWARD CURRENT – mA  
Figure 5a. Maximum average current vs. peak forward current. HLMA-xxxx.  
Figure 5b. Maximum average current vs. peak forward current. HLMT-xxxx.  
7
1.0  
0.9  
0.8  
0.7  
0.6  
0.5  
0.4  
0.3  
0.2  
0.1  
0
-50  
-40  
-30  
-20  
-10  
0
10  
20  
30  
40  
50  
ANGULAR DISPLACEMENT – DEGREES  
Figure 6. Relative luminous intensity vs. angular displacement for 15° device.  
1.1  
1.0  
0.9  
0.8  
0.7  
0.6  
0.5  
0.4  
0.3  
0.2  
0.1  
0
100 90 80 70 60 50 40 30 20 10  
0 10 20 30 40 50 60 70 80 90 100  
ANGULAR DISPLACEMENT – DEGREES  
Figure 7. Relative luminous intensity vs. angular displacement for 125° device.  
Color Bin Limits  
Intensity Bin Limits  
Package  
Bin  
0
Min.  
Max.  
Bin  
N
P
Min.  
25  
Max.  
50  
Yellow  
Full Distribution  
Full Distribution  
3
584.0  
586.5  
589.0  
591.5  
594.0  
587.5  
590.0  
592.5  
595.0  
597.5  
40  
80  
2
Q
R
63  
125  
200  
320  
500  
800  
1250  
2000  
3200  
5000  
4
100  
160  
250  
400  
630  
1000  
1600  
2500  
6
S
7
T
Orange  
0
U
V
2
599.0  
601.5  
603.8  
606.8  
602.5  
604.0  
608.2  
611.2  
3
W
X
4
5
Y
8
Mechanical Option Matrix  
Mechanical  
Option Code  
Definition  
00  
Straight Leads, Bulk Packaging, Quantity of 500 Parts  
11  
12  
14  
21  
22  
24  
31  
32  
34  
Gull Wing Leads, 12 mm Tape on 7 in. Dia. Reel, 1500 Parts per Reel  
Gull Wing Leads, Bulk Packaging, Quantity of 500 Parts  
Gull Wing Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel  
Yoke Leads, 12 mm Tape on 7 in. Dia. Reel, 1500 Parts per Reel  
Yoke Leads, Bulk Packaging, Quantity of 500 Parts  
Yoke Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel  
Z-Bend Leads, 12 mm Tape on 7 in. Dia. Reel, 1500 Parts per Reel  
Z-Bend Leads, Bulk Packaging, Quantity of 500 Parts  
Z-Bend Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel  
Note:  
All categories are established for classification of products. Products may not be available in all catego-  
ries. Please contact your local Avago representative for further clarification/information.  
For product information and a complete list of distributors, please go to our website: www.avagotech.com  
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.  
Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. Obsoletes 5989-4442EN  
AV02-0309EN - April 27, 2011  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明