609176003016100 [KYOCERA AVX]
PCB Connector,;
| 型号： | 609176003016100 |
| 厂家： | 
KYOCERA AVX |
| 描述： | PCB Connector, PC 连接器 连接器支架 |
| 文件： | 总11页 (文件大小：1556K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Standard IDC 18-24 AWG: WTB
00-9176
INTER
CONNECT
The 917X series of surface mount Insulation Displacement Connectors (IDC)
were developed to meet the harsh automotive and industrial market
applications for connecting individual wires directly to a PCB ranging from 14
AWG to 28 AWG. This industry proven contact system has been tested to
automotive levels of shock, vibration, and temperature cycling to prove their
reliability and robustness. The simplicity of inserting a wire into the connector
with a small tool allows a wide range of devices to be connected to the PCB
without soldering. In SSL applications specifically, these connectors are used to
bring power and signal onto the PCB or are used to daisy chain multiple boards
together in a long string. While the IDC contact provides a gas-tight connection
to conductor of the wire, the housing has been designed to grab the insulation
of the wire to provide a positive strain relief even in the harshest conditions. In
case of repair, the wires can be removed and replace up to three times.
The 9176 series accepts 18 AWG to 24 AWG wires with an insulation diameter
ranging from 1.1mm to 2.1mm. These dual contact connectors support a 10
amp current rating with two large SMT solder tails per wire to provide maximum
stability on the PCB. Available in 1p-3p configuration, these connectors can be
end stackable for higher pin counts. The 9176 series also comes with optional
locking strain relief caps that act as the termination tool for severe vibration
applications.
APPLICATIONS
FEATURES AND BENEFITS
• Connecting discrete wire components
directly to the PCB
• Bringing power and signals onto a PCB
• Daisy chaining PCB’s together to create
a continuous string of boards
• IDC contact provides a gas-tight connection to the PCB for long term reliability
•
•
Connector housing captures the wire insulation for positive strain relief
Tested to automotive levels on shock, vibration and temperature cycling for
reliability
•
•
•
•
Low and high volume assembly tools to match production volumes
Reduced total applied cost versus solder or crimp processes
Optional thru and end caps lock in place to provide maximum strain relief
High temperature insulator capable to 260ºC reflow soldering processes
• Application Notes: refer to 201-01-124
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 10 Amp / Contact
• Voltage Rating: 300 VAC
• Operating Temperature:
-40ºC to +125ºC
• Insulator Material: Nylon 46: UL94V0
• Contact Material: Phosphor Bronze
• Plating: Tin over Nickel
• Durability: 3 Cycles
HOW TO ORDER
X
00X
0XX
06
00
9176
Insulator Color
9 = UL White
8 = UL Black
Special Order
Number of Ways
No of
Wire Gauge Size
Plating
Option
06 = Pure Tin
all over
Prefix
Series
Code
Accepted
Wire Gauge
18 Gauge
Wire
Cap Code
Code
Details
Ways
Insulation Pages 6-7
001
002
003
1
2
3
Page 3
Page 4
Page 5
001
011
022
032
Ø 1.6-2.1
Ø 1.6-2.1
Ø 1.1-1.6
Ø 1.1-1.6
021
021
016
016
Stranded
20 Gauge
Solid or Stranded
22 Gauge
Solid or Stranded
24 Gauge
Solid or Stranded
Certification: UL File #E90723
1
Standard IDC 18-24 AWG: WTB
00-9176
INTER
CONNECT
CONNECTOR/TOOLING PART NUMBER MATRIX
SERIES 9176 IDC
HAND INSERTION TOOLING*
ACCESSORY CAPS
Through Wire Wire Stop
Wire
Insulation
Plastic
Metal
(high volume)
Mass
Termination
N/A
AWG
Positions
Color
Part Number
(medium volume)
18
18
18
18
18
18
20
20
20
20
20
20
22
22
22
22
22
22
24
24
24
24
24
24
24
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
1p
1p
2p
2p
3p
3p
1p
1p
2p
2p
3p
3p
1p
1p
2p
2p
3p
3p
1p
1p
1p
2p
2p
3p
3p
Black
009176001001806 069176701601000 069176701701000
609176001021000 609176001021099
609176001021100 609176001021199
White 009176001001906 069176701601000 069176701701000
Black
White 009176002001906 069176701601000 069176701701000 069176701701002 609176002021100 609176002021199
Black 009176003001806 069176701601000 069176701701000 069176701701003 609176003021000 609176003021099
White 009176003001906 069176701601000 069176701701000 069176701701003 609176003021100 609176003021199
Black
White 009176001011906 069176701601000 069176701701000
Black
White 009176002011906 069176701601000 069176701701000 069176701701002 609176002021100 609176002021199
Black 009176003011806 069176701601000 069176701701000 069176701701003 609176003021000 609176003021099
White 009176003011906 069176701601000 069176701701000 069176701701003 609176003021100 609176003021199
Black
White 009176001022906 069176701602000 069176701702000
Black
White 009176002022906 069176701602000 069176701702000 069176701702002 609176002016100 609176002016199
Black 009176003022806 069176701602000 069176701702000 069176701702003 609176003016000 609176003016099
White 009176003022906 069176701602000 069176701702000 069176701702003 609176003016100 609176003016199
N/A
009176002001806 069176701601000 069176701701000 069176701701002 609176002021000 609176002021099
009176001011806 069176701601000 069176701701000
N/A
N/A
609176001021000 609176001021099
609176001021100 609176001021199
009176002011806 069176701601000 069176701701000 069176701701002 609176002021000 609176002021099
009176001022806 069176701602000 069176701702000
N/A
N/A
609176001016000 609176001016099
609176001016100 609176001016199
009176002022806 069176701602000 069176701702000 069176701702002 609176002016000 609176002016099
White 009176001032106 069176701602000 069176701702000
Black 009176001032806 069176701602000 069176701702000
White 009176001032906 069176701602000 069176701702000
Black
White 009176002032906 069176701602000 069176701702000 069176701702002 609176002016100 609176002016199
Black 009176003032806 069176701602000 069176701702000 069176701702003 609176003016000 609176003016099
White 009176003032906 069176701602000 069176701702000 069176701702003 609176003016100 609176003016199
* Hand Insertion Tooling - Universal Hand Tool 067000773001000; Consult Application Notes 201-01-124
N/A
N/A
N/A
609176001016100 609176001016199
609176001016000 609176001016099
609176001016100 609176001016199
009176002032806 069176701602000 069176701702000 069176701702002 609176002016000 609176002016099
2
Standard IDC 18-24 AWG: WTB
00-9176
INTER
CONNECT
18-24 AWG 1 WAY IDC CONNECTOR
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHOR BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 1.
3. CONTACTS DESIGNED TO ACCEPT BETWEEN 20AWG AND 24AWG SOLID
AND STRANDED WIRES. 18AWG WILL ONLY ACCEPT STRANDED WIRES,
SEE TABLE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS REFER TO
ELCO SPEC 201-01-106
6. APPLICATION NOTES 201-01-124.
7. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 6.
8. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 8.
9. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).
10. ALL DIMENSIONS 0.20 TOLERANCE SPECIFIED.
Code
Accepted
Wire Gauge
A
Wire
Insulation
B
001
011
18AWG Stranded
20AWG Solid and Stranded
0.72 Ø 1.6-2.1 2.1
0.60 Ø 1.6-2.1 2.1
0.47 Ø 1.1-1.6 1.6
0.37 Ø 1.1-1.6 1.6
022 22AWG Solid and Stranded
032 24AWG Solid and Stranded
SMT PCB LAYOUT
PURE TIN PADS
PACKING DETAILS
REEL QTY
LEADER
TRAILER
1000
480MM
120MM
3
Standard IDC 18-24 AWG: WTB
00-9176
INTER
CONNECT
18-24 AWG 2 WAY IDC CONNECTOR
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHOR BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 1.
3. CONTACTS DESIGNED TO ACCEPT BETWEEN 20AWG AND 24AWG SOLID AND
STRANDED WIRES. 18AWG WILL ONLY ACCEPT STRANDED WIRES, SEE TABLE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS
REFER TO ELCO SPEC 201-01-106. UL COMPONENTS REFER TO
ELCO SPECIFICATION 201-01-106UL.
6. APPLICATION NOTES 201-01-124.
7. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 6.
8. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 8.
9. FOR PRESS WIRE ASSEMBLY TOOLING REFER TO PAGE 9
10. FOR ACCESSORY CAPS REFER TO PAGE 6 AND 7.
10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).
11. ALL DIMENSIONS 0.20 TOLERANCE SPECIFIED.
Code
Accepted
Wire Gauge
A
Wire
Insulation
B
001
011
18AWG Stranded
20AWG Solid and Stranded
0.72 Ø 1.6-2.1 2.1
0.60 Ø 1.6-2.1 2.1
0.47 Ø 1.1-1.6 1.6
0.37 Ø 1.1-1.6 1.6
022 22AWG Solid and Stranded
032 24AWG Solid and Stranded
SMT PCB LAYOUT
PURE TIN PADS
PACKING DETAILS
REEL QTY
LEADER
TRAILER
1000
480MM
120MM
4
Standard IDC 18-24 AWG: WTB
00-9176
INTER
CONNECT
18-24 AWG 3 WAY IDC CONNECTOR
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHOR BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 1.
3. CONTACTS DESIGNED TO ACCEPT BETWEEN 20AWG AND 24AWG SOLID AND
STRANDED WIRES. 18AWG WILL ONLY ACCEPT STRANDED WIRES, SEE TABLE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS
REFER TO ELCO SPEC 201-01-106. UL COMPONENTS REFER TO
ELCO SPECIFICATION 201-01-106UL.
6. APPLICATION NOTES 201-01-124.
7. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 8.
8. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 8.
9. FOR PRESS WIRE ASSEMBLY TOOLING REFER TO PAGE 9
10. FOR ACCESSORY CAPS REFER TO PAGE 6 AND 7.
10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).
11. ALL DIMENSIONS 0.20 TOLERANCE SPECIFIED.
Code
Accepted
Wire Gauge
A
Wire
Insulation
B
001
011
18AWG Stranded
20AWG Solid and Stranded
0.72 Ø 1.6-2.1 2.1
0.60 Ø 1.6-2.1 2.1
0.47 Ø 1.1-1.6 1.6
0.37 Ø 1.1-1.6 1.6
022 22AWG Solid and Stranded
032 24AWG Solid and Stranded
SMT PCB LAYOUT
PURE TIN PADS
PACKING DETAILS
REEL QTY
LEADER
TRAILER
1000
480MM
120MM
5
Standard IDC 18-24 AWG: WTB
00-9176
INTER
CONNECT
60-9176-00X-0XX-X00
ACCESSORY CAP – THROUGH WIRE
ASSEMBLED
CONNECTOR
NOTES:
1. CAP FOR IDC WIRE TO BOARD CONNECTION, 1, 2 AND 3
WAY, THROUGH WIRE.
2. FOR USE WITH STANDARD 9176 IDC CONNECTORS, SEE
PAGE 2 FOR THE CORRECT PART CODE TO MATCH WIRE.
3. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS
SEE TABLE BELOW.
4. DIMENSIONS A, B AND TEXT, SEE TABLE BELOW.
5. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION
DIAMETERS 1.1MM TO 1.6MM AND 1.6MM TO 2.1MM.
6. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.
7. PACKED IN BAGS, 1000 PIECES PER BAG.
8. ONE WAY CAP ASSEMBLY AID, REFER TO PAGE 10.
9. ALL DIMENSIONS 0.20 TOLERANCE SPECIFIED.
Code
016
021
Slot A
1.00
1.50
Diameter B
1.60
Text
Ø1.6
Ø2.1
Color X00
Black 000
White 100
2.10
6
Standard IDC 18-24 AWG: WTB
00-9176
INTER
CONNECT
60-9176-00X-0XX-X99
ACCESSORY CAP – WIRE STOP
ASSEMBLED
CONNECTOR
NOTES:
1. CAP FOR IDC WIRE TO BOARD CONNECTION, 1, 2 AND 3
WAY, WIRE STOP.
2. FOR USE WITH STANDARD 9176 IDC CONNECTORS, SEE
PAGE 2 FOR THE CORRECT PART CODE TO MATCH WIRE.
3. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS
SEE TABLE BELOW.
4. DIMENSIONS A, B AND TEXT, SEE TABLE BELOW.
5. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION
DIAMETERS 1.1MM TO 1.6MM AND 1.6MM TO 2.1MM.
6. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.
7. PACKED IN BAGS, 1000 PIECES PER BAG.
8. ONE WAY CAP ASSEMBLY AID, REFER TO PAGE 10.
9. ALL DIMENSIONS 0.20 TOLERANCE SPECIFIED.
Code
016
021
Slot A
1.00
1.50
Diameter B
1.60
Text
Ø1.6
Ø2.1
Color X00
Black 000
White 100
2.10
7
Standard IDC 18-24 AWG: WTB
00-9176
INTER
CONNECT
HAND INSERTION TOOLING
FOR SINGLE 18/24 GAUGE WIRE
UNIVERSAL HANDLE
Tool
Part Number
Details
6.35 A/F HEX
BIT HOLDER
06 7000 7730 01 000
HIGH PRODUCTION
MEDIUM PRODUCTION
Metal
Metal/Plastic
Max
Max
Tool
Tool
Insulation
Part Number
Dia
Insulation
Part Number
Dia
Ø
Ø
2.10
1.60
06 9176 7017 01 000
06 9176 7017 02 000
Ø
Ø
2.10
1.60
06 9176 7016 01 000
06 9176 7016 02 000
CLEARANCE AREA ON PCB FOR HAND TOOLING
2 WAY 3 WAY
1 WAY
8
Standard IDC 18-24 AWG: WTB
00-9176
INTER
CONNECT
INSERTION TOOLING
REQUIRES HAND PRESS WITH FLAT ROCK PLATES
2 WAY
3 WAY
HIGH PRODUCTION
Metal
Max
Insulation
Dia
No.
Tool
Part Number
of Ways
Ø2.10
Ø1.60
Ø2.10
Ø1.60
06 9176 7017 01 002
06 9176 7017 02 002
06 9176 7017 01 003
06 9176 7017 02 003
2
3
PCB RESTRICTED AREAS FOR PRESS ASSEMBLY TOOLING
2 WAY
3 WAY
NOTES:
1. DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.
2. MAXIMUM COMPONENT HEIGHT 1.00MM IN THIS AREA.
3. MAXIMUM COMPONENT HEIGHT 6.00MM IN THIS AREA.
4. THE SAME RESTRICTIONS APPLY TO ALL WIRE INSULATION DIAMETERS.
5. 2 AND 3 WAY TOOLS ONLY, FOR USE UNDER HAND PRESS WITH FLAT PLATES.
6. FOR HAND TOOLING REFER TO PAGE 8.
7. ALL DIMENSIONS 0.20 UNLESS TOLERANCE SPECIFIED.
9
Standard IDC 18-24 AWG: WTB
00-9176
INTER
CONNECT
HAND INSERTION TOOLING
FOR ONE WAY CAP INSERTION
CLEARANCE AREA ON PCB FOR HAND TOOLING
10
Standard IDC 18-24 AWG: WTB
00-9176
INTER
CONNECT
ASSEMBLED CONNECTOR
STANDARD CONNECTOR
CONNECTOR WITH CAP
NOTES:
1. ASSEMBLED HEIGHTS INCLUDE 0.10MM ALLOWANCE FOR PAD AND SOLDER THICKNESS.
NO ALLOWANCE HAS BEEN MADE FOR ANY SOLDER RESIST OR OTHER FEATURES.
2. WHEN THE WIRE IS ASSEMBLED THE INSULTATION SHOULD BE TRAPPED BY THESE EDGES.
11
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明