AZ2110-1A-5DF [AZETTLER]

Power/Signal Relay, 1 Form A, SPST, Latched, 7.3VDC (Coil), 40A (Contact), 30VDC (Contact), DC Input, Random, AC/DC Output;
AZ2110-1A-5DF
型号: AZ2110-1A-5DF
厂家: AMERICAN ZETTLER, INC.    AMERICAN ZETTLER, INC.
描述:

Power/Signal Relay, 1 Form A, SPST, Latched, 7.3VDC (Coil), 40A (Contact), 30VDC (Contact), DC Input, Random, AC/DC Output

文件: 总3页 (文件大小:359K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
AZ2110/AZ2120  
40A MINIATURE  
POWER RELAY  
FEATURES  
40 Amp switching capability  
1 Form A, B and C contacts available  
DC coils to 120 VDC  
Low cost  
Life expectancy to 10 million operations  
Class B insulation standard  
Class F (155°C) version available  
Versatility of both PC and “Trace Saver” quick-connect  
terminals on contacts offered on the AZ2120 version  
GENERAL DATA  
Proof Tracking Index (PTI/CTI) 175  
Life Expectancy  
Mechanical  
Minimum operations  
1 x 107  
UL, CUR file E44211 including versions meeting UL 508 and  
UL 873 spacing and contact rating requirements; VDE  
40023154 (some models)  
Electrical  
1 x 105 at 30 A 120 VAC Res. (N.O.)  
Operate Time (max.)  
Max. 12 ms  
Typical: 8 ms  
Release Time (max.)  
Max. 5 ms  
Typical: 3.5 ms  
Dielectric Strength  
(at sea level for 1min)  
2500 Vrms contact to coil  
1500 Vrms between open contacts  
CONTACTS  
Arrangement  
SPDT (1 Form C)  
SPST (1 Form A and 1 Form B)  
Insulation Resistance 1000 megohms min. at 500 VDC, 20°C,  
Ratings  
Resistive load:  
50% RH  
Max. switched power: 900 W or 10000 VA  
Max. switched current: 40 A (Form A)  
Dropout  
Greater than 10% of nominal coil voltage  
30 A (Form B)  
Ambient Temperature At nominal coil voltage  
Max. switched voltage: 30 VDC or 300 VAC  
Operating  
Storage  
-55°C (-67°F) to 100°C (212°F) Class B  
-55°C (-67°F) to 125°C (257°F) Class F  
-55°C (-67°F) to 130°C (266°F) Class B  
-55°C (-67°F) to 155°C (311°F) Class F  
UL Rating: See chart for UL contact ratings.  
AZ2150 Series meets UL 508 Group A spacing  
and UL 873 refrigeration and safety control  
requirements. AZ2151Series meets UL 508 Group  
B spacing requirements.  
Vibration  
0.062" DA at 10–55 Hz  
20 g  
VDE Rating:  
AZ2110-1A - 25 A at 250 VAC, 10k cycles,  
Shock  
resistive  
Enclosure (optional)  
Terminals  
P.B.T. polyester  
AZ2110-1C - 20 A at 250 VAC, 10k cycles,  
resistive  
Tinned copper alloy, P.C. & quick connects,  
.250" wide, on top  
Note: Allow suitable slack on leads when wiring, and do  
Material  
Silver cadmium oxide  
not subject the terminals to excessive force.  
Resistance  
20 milliohms initially  
(at rated current, voltage drop method)  
Max. Solder Temp.  
Max. Solder Time  
Weight  
270°C (518°F)  
5 seconds  
COIL  
40 grams  
Power  
At Pickup Voltage  
500 mW  
(typical)  
NOTES  
Max. Continuous  
Dissipation  
2.2 W at 20°C (68°F) ambient  
1.8 W at 40°C (104°F) ambient  
1. All values at 20°C (68°F).  
Temperature Rise  
38°C (68°F) at nominal coil voltage - AZ2110  
33°C (59°F) at nominal coil voltage - AZ2120  
2. Relay may pull in with less than “Must Operate” value.  
3. Other coil resistances and sensitivities available upon request. Please  
contact the factory.  
Temperature  
Max. 130°C (266°F) Class B  
Max. 155°C (311°F) Class F  
4. Specifications subject to change without notice.  
10/23/13  
AZ2110/AZ2120  
RELAY ORDERING DATA  
STANDARD RELAYS: UL 508: 1/8” Clearance, 1/4” Creepage  
COIL SPECIFICATIONS  
ORDER NUMBER*  
Nominal  
Coil  
Max.  
Continuous  
VDC  
Coil  
Resistance  
10ꢀ  
Must  
Operate  
VDC  
Form A (SPST)  
Form C (SPDT)  
VDC  
5
6
9
12  
15  
18  
24  
48  
70  
110  
7.3  
8.9  
27  
40  
97  
155  
256  
3.75  
4.5  
6.75  
9.0  
11.25  
13.5  
18.0  
36.0  
52.5  
82.5  
AZ2110–1A–5D  
AZ2110–1A–6D  
AZ2110–1A–9D  
AZ2110–1A–12D  
AZ2110–1A–15D  
AZ2110–1A–18D  
AZ2110–1A–24D  
AZ2110–1A–48D  
AZ2110–1A–70D  
AZ2110–1C–5D  
AZ2110–1C–6D  
AZ2110–1C–9D  
AZ2110–1C–12D  
AZ2110–1C–15D  
AZ2110–1C–18D  
AZ2110–1C–24D  
AZ2110–1C–48D  
AZ2110–1C–70D  
13.9  
17.5  
22.5  
27.4  
36.1  
68.4  
104.4  
163.2  
380  
660  
2,560  
5,500  
13,450  
AZ2110–1A–110D AZ2110–1C–110D  
STANDARD RELAYS: 1/16” Clearance, 1/8” Creepage  
COIL SPECIFICATIONS  
ORDER NUMBER*  
5
7.3  
27  
3.75  
AZ2111–1A–5D  
AZ2111–1C–5D  
AZ2111–1C–6D  
AZ2111–1C–9D  
AZ2111–1C–12D  
AZ2111–1C–15D  
AZ2111–1C–18D  
AZ2111–1C–24D  
AZ2111–1C–48D  
AZ2111–1C–70D  
AZ2111–1C–110D  
6
8.9  
40  
4.5  
AZ2111–1A–6D  
AZ2111–1A–9D  
AZ2111–1A–12D  
AZ2111–1A–15D  
AZ2111–1A–18D  
AZ2111–1A–24D  
AZ2111–1A–48D  
AZ2111–1A–70D  
AZ2111–1A–110D  
9
13.9  
17.5  
22.5  
27.4  
36.1  
68.4  
104.4  
163.2  
97  
155  
256  
380  
6.75  
9.0  
12  
15  
18  
24  
48  
70  
110  
11.25  
13.5  
18.0  
36.0  
52.5  
82.5  
660  
2,560  
5,500  
13,450  
For quick  
* Substitute “1B” in place of the “1A” to indicate 1 Form B contact. To indicate Class F version, add suffix “F”.  
connect terminals on contacts substitute “2120” or “2121” in place of “2110” or “2111”.  
UL/CUR File E44211 Approved Contact Ratings  
Form A  
(NO)  
Form B  
(NC)  
Form C  
NO  
Load Type  
Cycles  
Volts  
NC  
General Purpose  
(Inductive)  
Resistive  
100,000  
30,000  
100,000  
100,000  
100,000  
100,000  
6,000  
125 or 240 VAC  
277 VAC  
125 or 240 VAC  
30 VDC  
277 VAC  
240 VAC  
250 VAC  
125, 240, 277 VAC  
277 VAC  
30 A  
30 A  
30 A  
20 A  
20 A  
15 A  
40 A  
6 A  
20 A  
15 A  
30 A  
15 A  
10 A  
3 A  
30 A  
30 A  
30 A  
20 A  
40 A  
6 A  
15 A  
30 A  
15 A  
10 A  
3 A  
Ballast  
6,000  
6,000  
Pilot Duty  
6,000  
125 VAC  
125 VAC  
125 VAC  
240 VAC  
277 VAC  
125 VAC  
240 VAC  
125 VAC  
800 VA  
800 VA  
690 VA  
1152 VA  
764 VA  
1 HP  
290 VA  
768 VA  
1/4 HP  
1 HP  
800 VA  
690 VA  
470 VA  
1152 VA 768 VA  
764 VA  
1 HP  
290 VA  
275 VA  
30,000  
100,000  
6,000  
100,000  
6,000  
1/4 HP  
1 HP  
Motor Load  
6,000  
3 HP  
1 HP  
2 HP  
1 HP  
30,000  
100,000  
30,000  
125 or 277 VAC  
125 VAC  
3/4 HP  
96 LRA  
30 FLA  
82.8 LRA  
27 FLA  
80 LRA  
30 FLA  
60 LRA  
20 FLA  
15 A  
5 A  
TV–5  
3/4 HP  
60 LRA  
20 FLA  
82.8 LRA  
27 FLA  
60 LRA  
20 FLA  
60 LRA  
20 FLA  
15 A  
5 A  
TV–5  
Definite Purpose  
(LRA-Locked Rotor)  
(FLA-Full Load)  
33 LRA  
10 FLA  
33 LRA  
10 FLA  
100,000  
30,000  
125 VAC  
240 VAC  
277 VAC  
33 LRA  
10 FLA  
3 A  
3 A  
33 LRA  
10 FLA  
3 A  
3 A  
TV–3  
TV–3  
100,000  
Tungsten  
6,000  
6,000  
6,000  
6,000  
25,000  
25,000  
125 VAC  
240 VAC  
120 VAC  
240 VAC  
120 VAC  
120 VAC  
TV–5  
TV–3  
TV–3  
Note: See AZ2100 Data Sheet for more complete UL and CUR approved contact ratings.  
10/23/13  
AZ2110/AZ2120  
Maximum Switching Capacity  
40  
NO  
Coil Temperature Rise - AZ2110  
Coil Temperature Rise - AZ2120  
30  
20  
NC  
160  
140  
120  
100  
80  
160  
140  
120  
100  
10  
8
80  
30A  
25A  
30A  
AC RESISTIVE  
LOAD  
6
5
60  
60  
25A  
20A  
15A  
0A  
40  
40  
20A  
15A  
0A  
4
3
2
20  
20  
DC RESISTIVE  
LOAD  
0
0
40ꢀ  
60ꢀ  
80ꢀ  
100ꢀ 120ꢀ  
140ꢀ 160ꢀ 180ꢀ 200ꢀ  
40ꢀ  
60ꢀ  
80ꢀ  
100ꢀ 120ꢀ  
140ꢀ 160ꢀ 180ꢀ 200ꢀ  
Percent of Nominal Coil Voltage (at 20˚C)  
Percent of Nominal Coil Voltage (at 20˚C)  
1
10  
20  
30  
40  
60  
80 100  
200 300  
VOLTAGE  
MECHANICAL DATA  
AZ2110 / AZ2111  
.140 x .010  
(3.56 x 0.25)  
.618  
(15.7)  
.032 x .062  
(0.81 x 1.57)  
TERMINALS  
.970  
(24.65)  
.025 x .005  
(0.63 x 0.125)  
1.20  
(30.5)  
.045 x .045  
(1.14 x 1.14)  
TERMINALS  
.025 x .025  
(0.63 x 0.63)  
TERMINALS  
PC BOARD LAYOUT  
AZ2120/ AZ2121  
.081 .003  
DIA (4 PLC'S)  
(2.06 .076)  
.140 x .010  
(3.56 x 0.25)  
.991 x .010  
(25.2 x 0.25)  
.400  
(10.2)  
.300 (7.6)  
1.00  
(25.38)  
.900 (22.86)  
.025 x .005  
(0.63 x 0.125)  
.043 .003  
(1. 09 .076)  
.150 (3.8)  
.350 (8.9)  
Terminal eliminated  
on AZ 2110/AZ 2120  
Version  
.550 (14.0)  
.700 (17.8)  
1.165 x .010  
(29.6 x 0.25)  
Viewed toward  
terminals  
WIRING DIAGRAM  
Viewed toward  
AZ2111/2121 VERSION  
AZ2110/2120 VERSION  
terminals  
4
4
3
3
2
4
4
2
4
3
5
5
3
5
2
6
2
6
2
6
1
5
1
5
1
5
1
1
1
1 FORM A  
1 FORM B 1 FORM C  
(SPDT)  
1 FORM A  
1 FORM B 1 FORM C  
(SPDT)  
(SPST-NO) (SPST-NC)  
(SPST-NO) (SPST-NC)  
Dimensions in inches with metric equivalents in parentheses. Tolerance:  
.010"  
10/23/13  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY