AZ767-1A-5DE [AZETTLER]
Power/Signal Relay, 1 Form A, SPST, Latched, 8.3VDC (Coil), 5A (Contact), 150VDC (Contact), DC Input, Random, AC/DC Output;型号: | AZ767-1A-5DE |
厂家: | AMERICAN ZETTLER, INC. |
描述: | Power/Signal Relay, 1 Form A, SPST, Latched, 8.3VDC (Coil), 5A (Contact), 150VDC (Contact), DC Input, Random, AC/DC Output |
文件: | 总2页 (文件大小:121K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AZ767
SPDT SUBMINIATURE
POWER RELAY
FEATURES
• Small footprint
• Low cost
• Class B insulation standard
• Epoxy sealed version available
• 10 Amp switching
• UL, CUR file E44211
• VDE Pending
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 5 A 240 VAC Res.
Operate Time (typical) 8 ms at nominal coil voltage
CONTACTS
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Dielectric Strength
2500 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Ratings
Resistive load:
Max. switched power: 150 W (SPST-NO) standard
1250 VA (SPST-NO) standard
90 W (SPST-NO) sensitive
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Dropout
Greater than 5% of nominal coil voltage
750 VA (SPST-NO) sensitive
90 W (SPDT)
750 W (SPDT)
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 90°C (194°F), standard
-40°C (-40°F) to 105°C (221°F), sensitive
-40°C (-40°F) to 130°C (266°F)
Max. switched current: 10 A AC SPST-NO standard
5 A DC SPST-NO standard
3 A AC/DC SPST-NO sensitive
3 A AC/DC SPDT
Max. switched voltage:150* VDC or 380 VAC
Storage
Vibration
0.062" DA at 10–50 Hz
10 g operating, 100 g damage
P.B.T. polyester
Shock
*Note: If switching voltage is greater than 30VDC, special
precautions must be taken. Please contact the factory.
Enclosure
Rated Load
UL, CUR
Form A
Terminals
Tinned copper alloy, P.C.
270°C (518°F)
10 A at 125 VAC, Res., 30k cycles [1]
10 A at 125 VAC, General Use., 100k cycles [2]
5 A at 250 VAC, General Use, 100k [1][2]
5 A at 30 VDC, Res., 100k cycles [1][2]
300 W at 120 VAC Tungsten [2]
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
5 seconds
80°C (176°F)
3 A at 250 VAC, General Use, 100k cycles [1][2]
sensitive
Max. Immersion Time 30 seconds
3 A at 30 VDC, Res., 100k cycles [1][2] - sensitive
5 A at 125 VAC, Res., 100k cycles [1] - sensitive
10 LRA / 1.5 FLA at 120 VAC, 100k cycles [1]
1/10 HP at 125 VAC, 100k cycles [1]
1/16 HP at 250 VAC, 100k cycles [1]
8 A at 250 VAC, General Use, 100k cycles [2] - sensitive
high capacity
Weight
6 grams
COIL
Power
At Pickup Voltage
(typical)
253 mW standard
113 mW sensitive
Form C
3 A at 250 VAC, General Use, 100k cycles [1][2]
3 A at 30 VDC, Res., 100k cycles [1][2]
[1] silver cadmium oxide [2] silver nickel
Max. Continuous
Dissipation
1.25 W at 20°C (68°F) ambient
Temperature Rise
41°C (74°F) at nominal coil voltage, standard
22°C (40°F) at nominal coil voltage, sensitive
Material
Silver cadmium oxide or silver nickel
Resistance
<100 milliohms initially
(24 V, 1 A voltage drop method)
Temperature
Max. 130°C (266°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
3/19/10
AZ767
RELAY ORDERING DATA
STANDARD RELAYS
COIL SPECIFICATIONS
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
Max. Continuous
VDC
Coil
Form A (SPST)
Form C (SPDT)
VDC
Resistance 1ꢀ0
3
2.25
5.0
20
AZ767–1A–3D
AZ767–1A–5D
AZ767–1A–6D
AZ767–1A–9D
AZ767–1A–12D
AZ767–1A–18D
AZ767–1A–24D
AZ767-1A-48D
AZ767–1C–3D
AZ767–1C–5D
AZ767–1C–6D
AZ767–1C–9D
AZ767–1C–12D
AZ767–1C–18D
AZ767–1C–24D
AZ767-1C-48D
5
3.75
4.5
8.3
55
6
10.0
15.0
20.0
30.0
40.0
80.0
80
9
6.75
9.0
180
12
18
24
48
320
13.5
18.0
36.0
720
1,280
5,120
*For silver nickel contacts change “-1A” to “-1AB” or “-1C” to “-1CB”. Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated version.
SENSITIVE RELAYS
COIL SPECIFICATIONS
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
Max. Continuous
VDC
Coil
Form A (SPST)
VDC
Resistance 1ꢀ0
3
2.25
7.5
12.5
15.0
22.4
30.0
44.7
59.2
45
AZ767–1A–3DS
AZ767–1A–5DS
AZ767–1A–6DS
AZ767–1A–9DS
AZ767–1A–12DS
AZ767–1A–18DS
AZ767–1A–24DS
5
3.75
4.5
125
6
180
9
6.75
9.0
400
12
18
24
720
13.5
18.0
1600
2800
*For silver nickel contacts change “-1A” to “-1AB”. For high capacity silver nickel contacts change “-1A” to “-1ABT”. Add suffix “E” for epoxy sealed
version. Add suffix “A” for gold plated version.
MECHANICAL DATA
PC BOARD LAYOUT
.059
[1.50]
.073
[1.85]
.100
[2.54]
.058
[1.49]
.417 MAX.
[10.59]
.300
[7.62]
.740 MAX.
[18.80]
5xø.052 - FORM C
4xø.052 - FORM A
.441
[11.20]
FORM C ONLY
[ø1.3]
VIEWED TOWARD TERMINALS
WIRING DIAGRAM
.614 MAX.
[15.59]
5
4
.147
[3.73]
1
2
3
.073
[1.85]
FORM C ONLY
VIEWED TOWARD TERMINALS
Dimensions in inches with metric equivalents in parentheses. Tolerance:
.010"
3/19/10
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明