BML-S1G0-S7AD-M5EQ-D0 [BALLUFF]
Magnetically Coded Sensors;型号: | BML-S1G0-S7AD-M5EQ-D0 |
厂家: | Balluff |
描述: | Magnetically Coded Sensors |
文件: | 总3页 (文件大小:121K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Magnetically Coded Sensors
BML-S1G0-S77D-M5EQ-D0-S284
Order Code: BML0767
1) not included in scope of delivery, 2) Distance to tape, 3) Tape, 4) LED function indicator, 5) Active measurement
surface
Basic features
Electrical data
Additional features 01
Application
Real-time capable
linear/rotary motion
Current consumption max. at 24 V DC 70 mA
Current consumption max. at 5 V DC 220 mA
Approval/Conformity
cURus
CE
Hysteresis H max.
2 µm
Operating voltage Ub
Overvoltage protection
Power consumption
Switch-on delay max.
4.75...5.25 VDC/10...28 VDC
EAC
no
WEEE
≤ 1.5 W (no load)
1000 ms
Measuring principle
Series
absolute measuring system
S1G
Voltage-proof up to (GND to housing) 500 V DC
Display/Operation
Function indicator
Green LED
LED yellow
LED red
Electrical connection
Connection
Connector, M12x1-Male, 12-pin
Connection version
Polarity reversal protected
axial
no
Internet
www.balluff.com
eCl@ss 9.1: 27-27-07-05
1 / 3
Subject to change without notice: 278872
ETIM 6.0: EC002544
BML0767_0.38_2021-08-25
Magnetically Coded Sensors
BML-S1G0-S77D-M5EQ-D0-S284
Order Code: BML0767
Environmental conditions
Material
Altitude max.
2000 m
Housing material
Die-cast zinc, nickel plated,
Chrome-plated
Ambient temperature
EN 55016-2-3, Radiation
EN 60068-2-27, Continuous shock
EN 60068-2-27, Shock
EN 60068-2-6, Vibration
EN 60068-2-64, Noise
EN 61000-4-2, ESD
-20...70 °C
Housing material, surface protection nickel-plated
Industrial areas
150 g, 2 ms
Chrome-plated
100 g, 6 ms
Mechanical data
20 g, 10…2000 Hz
20 g, 5…2000 Hz
Severity Level 4
Severity Level 3
Severity Level 3
Severity Level 2
Diameter min.
Dimension
243 mm
16 x 18.5 x 80.3 mm
±0.5 mm
EN 61000-4-3, RFI
Lateral offset (Y)
Mounting part
Pitch max.
EN 61000-4-4, Burst
EN 61000-4-5, Surge
Through-hole 4.3 mm
±0.5 °
EN 61000-4-6, High-frequency fields Severity Level 3
Pole width
2 mm
EN 61000-4-8 Magnetic fields
Severity Level 5
1 mT (no effect)
Procedure direction
Roll max.
Lengthwise to tape
±0.5 °
Ext. magnetic fields max., in
operation
Tangential offset (X) max.
Weight
±0.5 mm
IP rating IEC 60529 (connector)
IP67
78 g
Overall system temperature
coefficient
10.5 ppm/K
Yaw max. ±
0.2 °
Relative humidity
≤ 90 %, non-condensing
Range/Distance
Storage temperature
-25...85 °C
Edge separation min.
Interpolation factor
Measuring range
0.11 µs
2000
Functional safety
4 m
MTTF (40 °C)
88 a
Non-linearity of sensor head, max.
Optimal read distance
Read distance
±2 µm
0.4 mm
0.01...0.8 mm
≤ 1 µm
1 µm
Interface
Bits, number
Clock
25 Bit
Repeat accuracy
RS422 differential signal
Resolution
Count direction
Differential signals
Error signal
Interface
rising
yes
Traverse speed max., absolute
interface
5 m/s
Traverse speed max., incremental
interface
5 m/s
yes
SSI
Digital A/B (RS422)
Interface coding
Preset
Gray
configurable via hardware PIN or
software tool
Real-time signals
SSI clock frequency max.
SSI clock frequency min.
SSI data
Digital A/B, RS422
900 kHz
70 kHz
1x error bit
1x null bit
23x position
Signal sequence
A before B = rising
Internet
www.balluff.com
eCl@ss 9.1: 27-27-07-05
2 / 3
Subject to change without notice: 278872
ETIM 6.0: EC002544
BML0767_0.38_2021-08-25
Magnetically Coded Sensors
BML-S1G0-S77D-M5EQ-D0-S284
Order Code: BML0767
Connector Drawings
Wiring Diagrams
Internet
www.balluff.com
eCl@ss 9.1: 27-27-07-05
ETIM 6.0: EC002544
3 / 3
Subject to change without notice: 278872
BML0767_0.38_2021-08-25
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明