K70ABT2XGHQ [BANNER]
EZ-LIGHT® Touch K70 Series Illuminated Buttons;
| 型号： | K70ABT2XGHQ |
| 厂家： | 
Banner Engineering |
| 描述： | EZ-LIGHT® Touch K70 Series Illuminated Buttons |
| 文件： | 总5页 (文件大小：346K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
EZ-LIGHT Touch K70 Series Illuminated
Buttons
Datasheet
Lighted Touch Button with Bipolar Outputs
•
Excellent immunity to false triggering by water spray, detergents, oils, and
other foreign materials
•
•
•
Rugged, cost-effective, and easy-to-install touch button with multicolor light
Momentary versions remain activated as long as touch is present
Latching versions start up not activated and toggle between activated and not
activated on successive touches
•
Ergonomically designed to eliminate hand, wrist, and arm stresses associated
with repeated switch operation; require no physical force to operate
•
•
Can be actuated with bare hands or in gloves
12 V to 30 V operation
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Models
Light (not
activated)
1
Model
Function
Output
Light (activated)
Connection
K70ALBT2XGHQ
K70RLBT2XGHQ
K70ABT2XGHQ
K70RBT2XGHQ
K70ALBT2GGHQ
K70RLBT2GGHQ
K70ABT2GGHQ
K70RBT2GGHQ
K70ALBT2RGHQ
K70RLBT2RGHQ
K70ABT2RGHQ
K70RBT2RGHQ
Bipolar, N.O.
Bipolar, N.C.
Bipolar, N.O.
Bipolar, N.C.
Bipolar, N.O.
Bipolar, N.C.
Bipolar, N.O.
Bipolar, N.C.
Bipolar, N.O.
Bipolar, N.C.
Bipolar, N.O.
Bipolar, N.C.
Latching
-
Green
Momentary
Latching
Integral 5-pin M12/Euro-
style male quick
Green
Red
Green
Green
disconnect (QD)
Momentary
Latching
Momentary
1
Integral 5-pin M12/Euro-style quick disconnect models are listed.
•
To order the 150 mm (6 in) PVC cable model with a 5-pin M12/Euro-style PVC connector, replace the suffix "Q" with "QP"
in the model number. For example K70ALBT2XGHQP.
•
•
To order the 2 m (6.5 ft) PVC cable model, omit the suffix "Q" in the model number. For example, K70ALBT2XGH.
Models with a quick disconnect require a mating cordset.
Original Document
189840 Rev. C
22 July 2016
189840
®
EZ-LIGHT Touch K70 Series Illuminated Buttons
Specifications
Supply Voltage
Indicator Lumens
Color
12 V to 30 V dc
Typical Wavelength
Typical Intensity (lm)
Supply Current
< 220 mA maximum current at 12 V dc (exclusive of load)
< 110 mA maximum current at 30 V dc (exclusive of load)
Green
Red
525 nm
625 nm
45
26
Supply Protection Circuitry
Protected against reverse polarity and transient voltages
Output Rating
Connections
Maximum load: 150 mA
Integral 5-pin M12/Euro-style male quick disconnect (QD); 2 m (6.5 ft)
unterminated PVC-jacketed cable; or 150 mm (6 in) PVC cable with a
5-pin M12/Euro-style male quick disconnect (QD)
ON-State saturation voltage: < 2 V dc at 10 mA ; < 2.5 V dc at 150
mA
OFF-State leakage current: < 10 µA at 30 V dc
Mounting
Output Response Time:
M30 × 1.5 threaded base; maximum torque 4.5 N·m (40 in·lbf)
Momentary models: 50 ms ON and OFF
Latching models: 150 ms ON and OFF
Construction
Housing and dome: Polycarbonate
Mounting nut: PBT
Environmental Rating
Required Overcurrent Protection
IEC IP65
WARNING: Electrical connections must be
made by qualified personnel in accordance
with local and national electrical codes and
regulations.
Storage
−40 °C to +70 °C (−40 °F to +158 °F)
Operating Conditions
−40 °C to +50 °C (−40 °F to +122 °F)
90% at +50 °C maximum relative humidity (non-condensing)
Overcurrent protection is required to be provided by end product
application per the supplied table.
Overcurrent protection may be provided with external fusing or via
Current Limiting, Class 2 Power Supply.
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to http://
www.bannerengineering.com.
Vibration and Mechanical Shock
Vibration 10 Hz to 55 Hz 1.0 mm p-p amplitude per IEC 60068-2-6
Shock 30G 11 ms duration, half sine wave per IEC 60068-2-27
Power-Up Delay
300 ms
Latching models start up in a non-activated state
Supply Wiring
(AWG)
Required Overcurrent Protection
(Amps)
Certifications
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
Dimensions
R31.8
[1.25]
70.0
[2.76]
63.5
[2.50]
49.7
[1.96]
20.9
[.82]
24.9
[.98]
M30 x 1.5-6g
M12 x 1-6g
8.0
[.32]
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 189840 Rev. C
®
EZ-LIGHT Touch K70 Series Illuminated Buttons
All measurements are listed in millimeters [inches], unless noted otherwise.
Wiring Diagrams
Color Key
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
1
3
+
12-30V dc
–
2
4
5
Load
Load
Not Used
NOTE: Cabled wiring diagrams are shown. Quick disconnect (QD) wiring diagrams are functionally identical.
Accessories
Cordsets
5-Pin Threaded M12/Euro-Style Cordsets—Single Ended
Model
Length
Style
Dimensions
Pinout (Female)
MQDC1-501.5
MQDC1-506
MQDC1-515
0.50 m (1.5 ft)
1.83 m (6 ft)
4.57 m (15 ft)
44 Typ.
Straight
M12 x 1
2
MQDC1-530
9.14 m (30 ft)
ø 14.5
1
4
3
MQDC1-506RA
MQDC1-515RA
1.83 m (6 ft)
4.57 m (15 ft)
5
32 Typ.
[1.26"]
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
30 Typ.
[1.18"]
Right-Angle
MQDC1-530RA
9.14 m (30 ft)
M12 x 1
ø 14.5 [0.57"]
5-Pin Threaded M12/Euro-Style Cordsets—Washdown Stainless Steel
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-WDSS-0506
MQDC-WDSS-0515
1.83 m (6 ft)
4.57 m (15 ft)
2
1
4
3
Ø15.5 mm
5
Straight
1 = Brown
2 = White
3 = Blue
Ø4.8 mm
MQDC-WDSS-0530
9.14 m (30 ft)
43.5 mm
4 = Black
5 = Gray
P/N 189840 Rev. C
www.bannerengineering.com - Tel: +1-763-544-3164
3
®
EZ-LIGHT Touch K70 Series Illuminated Buttons
5-Pin Threaded M12/Euro-Style Cordsets—Washdown, with Shield
Model
Length
Style
Dimensions
Pinout (Female)
MQDCWD-506
1.83 m (6 ft)
2
1
4
42 Typ.
[1.65"]
3
5
ø 15.0
[0.57"]
Straight
MQDCWD-530
9.14 m (30 ft)
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
M12 x 1
Brackets
SMB30A
45
60
85
•
Right-angle bracket with
curved slot for versatile
orientation
Clearance for M6 (¼ in)
hardware
Mounting hole for 30 mm
sensor
45
SSA-MBK-EEC1
C
B
•
•
Single 30 mm hole
8 gauge steel, black finish
(powder coat)
61
•
•
•
80
B
A
•
Front surface for customer
applied labels
69
A
12-ga. stainless steel
Hole center spacing: A to B=40
Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5
Hole size: A = ø 7 , B = ø 30
SMB30FVK
SMB30MM
•
•
•
V-clamp, flat bracket and
fasteners for mounting to
pipe or extensions
Clamp accommodates 28
mm dia. tubing or 1 in.
square extrusions
•
12-ga. stainless steel bracket
with curved mounting slots
for versatile orientation
Clearance for M6 (¼ in)
hardware
Mounting hole for 30 mm
sensor
57
70
46
A
118
C
•
•
57
B
A
30 mm hole for mounting
sensors
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
Hole size: A= ø 31
45
SMB30RAVK
SMBAMS30P
A
•
•
•
V-clamp, right-angle bracket
and fasteners for mounting
sensors to pipe or extrusion
Clamp accommodates 28
mm dia. tubing or 1 in.
square extrusions
30 mm hole for mounting
sensors
•
•
Flat SMBAMS series bracket
30 mm hole for mounting
sensors
C
46
A
93
•
•
Articulation slots for 90°+
rotation
12-ga. 300 series stainless
steel
B
90
57
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
Hole size: A = ø 30.5
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp.
4
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 189840 Rev. C
®
EZ-LIGHT Touch K70 Series Illuminated Buttons
Copyright Notice
Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not
intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product
warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any
©
time. For the most recent version of any documentation, refer to: www.bannerengineering.com.
Banner Engineering Corp. All rights reserved.
www.bannerengineering.com - Tel: +1-763-544-3164
相关型号：
©2020 ICPDF网 联系我们和版权申明