LEDRB70X70M [BANNER]
LED..B..M Series Backlights;
| 型号： | LEDRB70X70M |
| 厂家： | 
Banner Engineering |
| 描述： | LED..B..M Series Backlights |
| 文件： | 总3页 (文件大小：162K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LED..B..M Series Backlights
Datasheet
®
Visible red or infrared backlights in 2 sizes, for use with PresencePLUS P4 sensors
®
•
•
•
•
•
•
Diffused backlight for PresencePLUS P4 sensors
Continuous light and strobed operation, selectable via sensor software
Solid-state LED matrix, in two sizes
Direct connection to PresencePLUS P4 sensor (if sensor is powered by 24V dc)
Two sizes available; see models table
Bracket option(s) available for all models
Models
Model
LED Color
Wave Length
Active Area
LEDIB70X70M
LEDRB70X70M
LEDIB85X220M
LEDRB85X220M
Infrared
940 nm
660 nm
940 nm
660 nm
71 mm × 71 mm
(2.8 in × 2.8 in)
Visible Red
Infrared
85 mm × 220 mm
(3.35 in × 8.67 in)
Visible Red
To order the 9 m (30 ft) integral cable model, add the suffix “W/30” to the model number (for example, LEDIB70X70M W/30).
Specifications
Light Source
Construction
LED; see models table for wavelengths
Low-carbon steel with black zinc plating, acrylic window
Illumination
Useful Life
Diffused for use in applications needing a backlit light source.
10,000 hours (LED ON time). When operated within specifications, output
will decrease less than 30% after 10,000 hours and less than 40% after
20,000 hours.
Supply Voltage and Current
70 X 70 mm models: 24 V dc at 250 mA max.
85 x 220 mm models: 24 V dc at 500 mA max.
Voltage supplied by PresencePLUS P4 sensors, if operating at 24 V dc (see
sensor manual).
Operating Conditions
0 °C to 50 °C (32 °F to 122 °F)
90% at 50 °C (non-condensing) max. relative humidity
Certifications
Connections
2 m (6.5 ft) or 9 m (30 ft) attached PVC pigtail with 3-wire, 8 mm male Pico-
style connector
Original Document
116947 Rev. D
20 February 2019
116947
LED..B..M Series Backlights
Dimensions
All measurements are listed in millimeters [inches], unless noted otherwise.
110.4 mm
25.4 mm
(4.35")
(1.0")
8.2 mm
(0.32")
94.0 mm
(3.70")
15.8 mm
(0.62")
61.0 mm
(2.40")
71.0 mm
(2.80")
92.6 mm
(3.65")
46.2 mm
(1.81")
10.8 mm
(0.43")
13.8 mm
(0.54")
4x M4 x 0.7
(7.1 mm Deep)
19.7 mm
(0.78")
71.0 mm
(2.80")
Figure 1. Backlight, 70x70 mm model
220.0 mm
(8.66")
27.9 mm
(1.10")
25 mm
(0.98")
11.6 mm
(0.45")
85.0 mm
(3.3")
275.8 mm
(10.86")
6.9 mm
(0.27")
244.3 mm
(9.62")
17.4 mm
(0.69")
108.2 mm
(4.26")
73.5 mm
(2.89")
Figure 2. Backlight, 85x220 mm model
Clean the Light
Regularly remove dust, dirt, or fingerprints from the light source.
1. Blow off dust using anti-static compressed air.
2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris.
Important: Do not use any other chemicals for cleaning the light source.
2
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 116947 Rev. D
LED..B..M Series Backlights
Accessory Mounting Brackets
SMBABM
SMBACM
•
93
•
•
•
•
13-ga. zinc-plated low-
carbon steel
14-ga. zinc-plated low-
carbon steel
86
4X Ø4.6
(4) M4 Phillips flathead
screws included
•
(4) M4 socket-head cap
screws, washers and hex
key included
3X Ø8.7
For mounting the light from
the front
110
•
•
For mounting the light from
the rear
41
2X Ø4.6
Accommodates backlight
models LED..B70X70..
Accommodates backlight
models LED..B70X70..
SMBLB
•
Accommodates backlight
models LED..B85X220..
99
2X Ø6.8
2X Ø4.6
41
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not
cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO
BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES
RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT,
STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously
manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the
product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will
void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at
any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to:
www.bannerengineering.com.
For patent information, see www.bannerengineering.com/patents.
©
Banner Engineering Corp. All rights reserved
相关型号：
©2020 ICPDF网 联系我们和版权申明