LEDWB300X150PW2-XQ [BANNER]
LED Series Sealed Backlights;型号: | LEDWB300X150PW2-XQ |
厂家: | Banner Engineering |
描述: | LED Series Sealed Backlights |
文件: | 总5页 (文件大小:355K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LED Series Sealed Backlights
Datasheet
For use with any Vision System
•
•
•
•
•
•
•
•
•
•
•
Rugged, waterproof housing, rated IEC IP67
Mounts directly from the back or surface mount using available brackets
Smooth exterior for easy cleaning
Diffused backlights for any Vision System
Continuous or strobed operation is selectable via sensor software
Solid-state LED matrix, in four sizes
Available in four visible colors plus infrared
Extremely bright light
Completely non-corrosive
Extremely even intensity edge-to-edge
M12 connector
Models
Models
LED Color
Wavelength
Lighted Area
LEDIB75X150PW2-XQ
LEDRB75X150PW2-XQ
LEDBB75X150PW2-XQ
LEDGB75X150PW2-XQ
LEDWB75X150PW2-XQ
LEDIB150X150PW2-XQ
LEDRB150X150PW2-XQ
LEDBB150X150PW2-XQ
LEDGB150X150PW2-XQ
LEDWB150X150PW2-XQ
LEDIB225X150PW2-XQ
LEDRB225X150PW2-XQ
LEDBB225X150PW2-XQ
LEDGB225X150PW2-XQ
LEDWB225X150PW2-XQ
LEDIB300X150PW2-XQ
LEDRB300X150PW2-XQ
LEDBB300X150PW2-XQ
LEDGB300X150PW2-XQ
LEDWB300X150PW2-XQ
Infrared
Visible Red
Blue
850 nm
633 nm
469 nm
525 nm
6500 K
850 nm
633 nm
469 nm
525 nm
6500 K
850 nm
633 nm
469 nm
525 nm
6500 K
850 nm
633 nm
469 nm
525 nm
6500 K
75 mm x 150 mm (2.95 in x 5.91 in)
Green
White
Infrared
Visible Red
Blue
150 mm x 150 mm (5.91 in x 5.91 in)
225 mm x 150 mm (8.86 in x 5.91 in)
300 mm x 150 mm (11.81 in x 5.91 in)
Green
White
Infrared
Visible Red
Blue
Green
White
Infrared
Visible Red
Blue
Green
White
Original Document
149837 Rev. F
14 March 2019
149837
LED Series Sealed Backlights
Specifications
Light Source
Connections
LED; wavelengths:
Integral 5-pin M12/Euro-style quick disconnect, accessory cordset
required
LED Color
Wavelength
Operating Conditions
Temperature: 0 °C to +50 °C (+32 °F to +122 °F)
Humidity: 95ꢀ maximum relative humidity (non-condensing)
Infrared
Visible Red
Blue
850 nm
633 nm
469 nm
525 nm
6500 K
Illumination
Green
Diffused for use in applications needing a backlit light
Useful Life
White
B50/L50 Lifetime > 100,000 hours (Infrared, Red)
B50/L50 Lifetime > 90,000 hours (Blue, Green, White)
Supply Voltage and Current
Construction
Black Valox housing; acrylic window
75 mm x 150 mm models: 24 V dc 10ꢀ ꢁ 550 mA maximum
150 mm x 150 mm models: 24 V dc 10ꢀ ꢁ 1.1 A maximum
225 mm x 150 mm models: 24 V dc 10ꢀ ꢁ 1.65 A maximum
300 mm x 150 mm models: 24 V dc 10ꢀ ꢁ 2.2 A maximum
Use only with a suitable Class 2 power supply (UL) or SELV power supply (CE)
™
Environmental Rating
IEC IP67
Certification
This device complies with part 15 of the FCC Rules and CAN ICES-3 (A)/NMB-3(A). Operation is subject to the following two conditions:
1.
2.
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3 (A)/NMB-3(A). These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the manufacturer.
Dimensions
All measurements are listed in millimeters [inches], unless noted otherwise.
75 mm × 150 mm models
M5 - 0.8 X 4
2
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 149837 Rev. F
LED Series Sealed Backlights
150 mm × 150 mm models
M5 - 0.8 X 4
225 mm × 150 mm models
25.45
[1.002]
167.87
[6.609]
180.1
[7.091]
272.74
[10.738]
242.6
[9.551]
260.32
[10.249]
286.23
[11.269]
150
[5.906]
M5 - 0.8 X 4
P/N 149837 Rev. F
www.bannerengineering.com - Tel: + 1 888 373 6767
3
LED Series Sealed Backlights
300 mm × 150 mm models
M5 - 0.8 X 4
Wiring
PresencePlus Pro
Controller Terminal
Block
Cable Wire
Color
Continuous On
Mode
Wire Purpose
Power Wires
Strobed Mode
1
2
Brown (1)
Blue (3)
+24 V dc
common
+24 V dc
common
Pin 01
Pin 02
Active Low: open
Open — Active Low
Strobe Polarity
Control
Gray (5)
open
Pin 02 — Active
High
Active High: connect to common (Blue wire)
0 V dc = ON (Active Low)
0 V dc = OFF (Active High)
Strobe common
+5 V dc to 24 V dc = OFF (Active
Low)
White (2)
Black (4)
open
open
Pin 04
Pin 02
Strobe Voltage
Wires
+5 V dc to 24 V dc = ON (Active
High)
(2) Strobe (+/0)
(1) +24V dc
(3) Common
(4) Strobe Common
(5)Active High/Active Low
Figure 1. Pinouts for Mating Cable
1
2
For Banner-supplied wire.
When connecting the light to a PresencePLUS Pro controller terminal block, the controller supply must be 24 V dc 10ꢀ.
4
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 149837 Rev. F
LED Series Sealed Backlights
Accessories
Cordsets
5-Pin Threaded M12/Euro-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MQDC20-506
MQDC20-515
1.83 m (6 ft)
2
1
4
4.57 m (15 ft)
42 Typ.
[1.65"]
3
5
Straight
1 = Brown
2 = White
3 = Blue
M12 x 1
ø 15 [0.59"]
MQDC20-530
9.14 m (30 ft)
4 = Black
5 = Gray
5-Pin Threaded M12/Euro-Style Cordsets—Stainless Steel Nut
Model
Length
Style
Dimensions
Pinout (Female)
MQDC20SS-506
MQDC20SS-515
1.83 m (6 ft)
2
1
4
4.57 m (15 ft)
42 Typ.
[1.65"]
3
5
Straight
1 = Brown
2 = White
3 = Blue
M12 x 1
MQDC20SS-530
9.14 m (30 ft)
ø 15 [0.59"]
4 = Black
5 = Gray
Accessory Brackets
SMBBSSM
2X Ø6.8
35
•
316 stainless steel bracket
and hardware
2X Ø5.5
180
•
Includes 2 brackets; four
M5 socket drive, button
head screws to attach to
light
10.75
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not
cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO
BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES
RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT,
STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously
manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the
product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will
void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at
any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to:
www.bannerengineering.com.
For patent information, see www.bannerengineering.com/patents.
©
Banner Engineering Corp. All rights reserved
相关型号:
©2020 ICPDF网 联系我们和版权申明