MIAD9D [BANNER]
MINI-BEAM® MIAD9 NAMUR Series Sensor;型号: | MIAD9D |
厂家: | Banner Engineering |
描述: | MINI-BEAM® MIAD9 NAMUR Series Sensor |
文件: | 总10页 (文件大小:909K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
MINI-BEAM MIAD9 NAMUR Series Sensor
Datasheet
No revision without agency approval.
•
Designed for use with approved amplifiers and intrinsically safe barriers in explosive
environments
•
•
•
NAMUR compliant sensors with MINI-BEAM performance and small size
Output 1 mA or less in the dark condiꢀon and 2 mA or more in the light condiꢀon
Models with integral cable or quick-disconnect
WARNING: Not To Be Used for Personnel Protecꢀon
Never use this device as a sensing device for personnel protecꢀon. Doing so could lead to serious injury or death.
This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety
applicaꢀons. A sensor failure or malfuncꢀon can cause either an energized or de-energized sensor output
condiꢀon.
Models
1
Model
Sensing Mode
Sensing Beam
Sensing Range
Output Type
MI9E Emiꢁer
MIAD9R Receiver
MIAD9LVAG
MIAD9LV
Opposed
Infrared, 880 nm
6 m (20 ꢁ)
Polarized Retroreꢂecꢀve
Retroreꢂecꢀve
Diffuse
Visible red, 650 nm
Visible red, 650 nm
Infrared, 880 nm
Infrared, 880 nm
50 mm to 2 m (2 in to 7 ꢁ)
5 m (16.4 ꢁ)
Constant Current
≤ 1.2 mA dark
≥ 2.1 mA light
MIAD9D
380 mm (15 in)
75 mm (3 in)
MIAD9W
Divergent Diffuse
MIAD9CV
16 mm (0.6 in)
43 mm (1.7 in)
Convergent
Visible red, 650 nm
Infrared, 880 nm
MIAD9CV2
MIAD9F
Fiber Opꢀc (Glass)
Range varies by sensing mode and
fiber opꢀcs used
Overview
MIAD9 Series NAMUR Sensors are small, rugged, self-contained two-wire sensors designed for
use with cerꢀfied intrinsically safe switching amplifiers and barriers (Approved Apparatus) with
intrinsically safe circuits. MIAD9 Series NAMUR sensors are designed in accordance with DIN
19234 (IEC/EN 60947-5-6) for operaꢀon via two-wire connecꢀon to a Approved Apparatus that
is controlled by the variable internal resistance of the sensor.
Gain
Adjustment
LED
Indicator
Blue (2)
No
Connection
These sensors vary the impedance across the sensor output, which passes 1 mA or less in the
“dark” condiꢀon and 2 mA or more in the “light” condiꢀon. A red LED on the rear of the sensor
lights whenever the sensor sees the “light” condiꢀon. A rugged, clutched, 15-turn sloꢃed brass
screw Gain control potenꢀometer enables precise adjustment of system sensiꢀvity.
No
Brown (1)
Connection
Figure 1. Features (rear of sensor, quick-
disconnect model shown)
Models are available with either a 2 m (6.5 ꢁ) or 10 m (30 ꢁ) long aꢃached PVC-covered cable,
or a 4-pin Euro-style quick disconnect (QD) connector. Quick disconnect models (with “Q” in
the model number suffix) use MQD9-4.. maꢀng cable (either straight or right angle connector;
see Quick-Disconnect (QD) Cables on page 7). Contact Banner Engineering for availability of
sensor models with 10 m (30 ꢁ) long aꢃached cable.
1
Only standard 2 m (6.5 ꢁ) cable models are listed. For 4-pin Euro-style Integral QD models: add suffix “Q” to the model number (for example, MIAD9RQ);
accessory maꢀng cable required.
Original Document
39616 Rev. L
21 March 2017
39616
®
MINI-BEAM MIAD9 NAMUR Series Sensor
Installaꢀon Instrucꢀons
Ex/HazLoc Applicaꢀons
WARNING:
•
•
Explosive Atmospheres/Hazardous Locaꢀons
The user has the responsibility to ensure that all local, state, and naꢀonal laws, rules, codes, or regulaꢀons
relaꢀng to the installaꢀon and use of this Banner device in any parꢀcular applicaꢀon are saꢀsfied. This
Banner device must be installed by Qualified Persons, in accordance with this document and applicable
regulaꢀons.
•
A Qualified Person is a person who, by possession of a recognized degree or cerꢀficate of professional
training, or who, by extensive knowledge, training and experience, has successfully demonstrated the
ability to solve problems relaꢀng to the subject maꢃer and work.
WARNING:
•
•
Explosion Hazard
Do not disconnect equipment unless the power has been switched off or the area is known to be non-
hazardous.
CAUTION: Electrostaꢀc Discharge (ESD)
Special Condiꢀons for Safe Use. Parts of the enclosure are non-conducꢀng and may generate an igniꢀon-capable
level of ESD. Cleaning of the equipment shall be done only with a damp cloth.
General Notes and Condiꢀons for Safe Use:
•
See Specificaꢀons and Wiring Diagrams for important informaꢀon concerning enꢀty parameters, permissible locaꢀons,
electrical connecꢀons and cerꢀficaꢀons.
•
In addiꢀon to the warning above concerning user responsibility, the installaꢀon must comply with the following:
◦
◦
All installaꢀons must comply with all manufacturer's instrucꢀons.
®
®
U.S. Installaꢀons: The relevant requirements of the Naꢀonal Electrical Code (ANSI/NFPA-70 (NEC ) and when
appropriate ANSI/ISA-RP12.06.01 Installaꢀon of Intrinsically Safe Systems for Hazardous (Classified) Locaꢀons.
◦
◦
Canadian Installaꢀons: The relevant requirements of the Canadian Electrical Code (CSA C22.1).
ATEX and IECEx Installaꢀons: The relevant requirements of EN 60079-14 and applicable Naꢀonal regulaꢀons.
•
•
Do not aꢃempt any repairs to this Banner device; it contains no field-replaceable parts or components. Tampering and/or
replacement with non-factory components may adversely affect the safe use of the system.
Approved Apparatus enꢀty parameters must meet the following requirements:
◦
◦
◦
◦
Voc or Vt ≤ Vmax
Ca ≥ Ci + Ccable
Isc or It ≤ Imax
La ≥ Li + Lcable
•
Sensor Enꢀty Parameters:
◦
◦
◦
◦
◦
Vmax (Ui) ≤ 15 V dc
Imax (li) ≤ 60 mA
Pi ≤ 225 mW
Ci = 0.3 μF
Li = 0 mH
•
Cable Enꢀty Parameters (if unknown):
◦
◦
Ccable = 60 pF/ꢁ
Lcable = 0.2 µH/ꢁ
•
•
•
The ambient operaꢀng temperature range of the Sensors is −40 °C to +70 °C (−40 °F to +158 °F).
For U.S. installaꢀons, Class II and III, Division 2 applies only to model numbers ending in a Q suffix.
For intrinsically safe installaꢀons, sensors must be used with cerꢀfied intrinsically safe switching amplifiers and barriers
(Approved Apparatus) with intrinsically safe circuits that limit supply voltage and current in the event of failures.
Associated Apparatus is not required for installaꢀon of the devices within a Division 2 hazardous (classified) locaꢀon when
installed per the Naꢀonal Electrical Code. The maximum voltage for Division 2 installaꢀon is 15 V dc. In Division 2 installaꢀons
(without Associated Apparatus), observe Explosion Hazard warning at the beginning of this secꢀon.
•
•
Associated Apparatus is not required for installaꢀon of the devices within a Division 2 hazardous (classified) locaꢀon when
installed in, or through the wall of a suitable enclosure with provision for connecꢀon of rigid metal conduit per the Canadian
Electrical Code, as acceptable to the local inspecꢀon authority having jurisdicꢀon. The maximum raꢀng for Division 2
installaꢀon is 15 V dc, 60 mA. In Division 2 installaꢀons (without Associated Apparatus), observe Explosion Hazard warning at
the beginning of this secꢀon.
•
Maximum non-hazardous area voltage that the Approved Apparatus (intrinsically safe circuit) is connected to must not exceed
250 V.
•
•
Intrinsic safety ground, if required for the Associated Apparatus, shall be less than 1 ohm.
Maximum connector torque: 6 ꢁ-lbs.
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 39616 Rev. L
®
MINI-BEAM MIAD9 NAMUR Series Sensor
Wiring Connecꢀons
MIAD9 Series NUMAR sensors are intrinsically safe ONLY when used with cerꢀfied intrinsically safe switching amplifiers and barriers
(Approved Apparatus) with intrinsically safe circuits. Banner does not manufacture such devices; however, our applicaꢀons engineers
can refer you to suppliers of cerꢀfied devices that will interface with Banner sensors.
The user is responsible for proper installaꢀon and maintenance of this equipment, and must conform with the cerꢀficaꢀon
requirements relaꢀng to barriers and to maximum allowable capacitance and inductance of the field wiring. If in doubt about these
requirements, our applicaꢀons engineers can refer you to the appropriate authority.
Non-Hazard Area
Factory Mutual Approved
Hazard Area
Associated Apparatus
Apparatus
V dc Supply
–
+
Brown
Blue
+
–
Switched
Output
MIAD9 Series
NAMUR Sensor
DIN 19234
Switching Amplifier
(sensor power source
and monitor)
Speciꢂcaꢀons
Supply Voltage and Current
Output
5 to 15 V dc (provided by the amplifier to which the sensor is connected)
Constant current output: ≤ 1.2 mA in the “dark” condiꢀon and ≥ 2.1 mA in the
“light” condiꢀon
Adjustments
Output Response Time
15-turn sloꢃed brass screw GAIN (sensiꢀvity) adjustment potenꢀometer
(clutched at both ends of travel); located on rear panel and protected by a
clear gasketed acrylic cover
Opposed mode: 2 ms ON/400 μs OFF
All other modes: 5 ms ON/OFF (does not include amplifier response)
Indicators
Environmental Raꢀng
Red LED Alignment Indicator Device (AID) located on rear panel lights when
the sensor sees a “light” condiꢀon; pulse rate is proporꢀonal to signal
strength (the stronger the signal, the faster the pulse rate).
Banner tested to NEMA standards 1, 2, 3, 3S, 4, 4X, 6, 12 and 13
IEC IEC IP67
Operaꢀng Condiꢀons
Construcꢀon
Temperature: −40 °C to +70 °C (−40 °F to +158 °F)
Reinforced thermoplasꢀc polyester housing, totally encapsulated, o-ring
sealing, acrylic lenses, and stainless steel screws
Connecꢀons
PVC-jacketed 2-conductor 2 m or 9 m cables, or special 4-pin Euro-style quick-
disconnect (QD) fiꢄng are available; QD cables are ordered separately.
Applicaꢀon Note
Special Condiꢀons for Safe Use: Parts of the enclosure are non-conducꢀng
and may generate an igniꢀon-capable level of ESD. Cleaning of the equipment
must be done only with a damp cloth.
Cerꢀꢂcaꢀons
1725
IEC IECEx FMG 14.0029X
ATEX FM12ATEX0094X
FM CoC 0003046293 (US)
FM CoC 0003046293C (CAN)
Design Standards
ATEX (European)
Canada
EN 60079-0, EN 60079-11 and EN 60079-26
CAN/CSA C22.2: No.0-M91, No.142-M1987, No.157-92, No.213-M1987, No.1010.1, E60079-0 and E60079-11
FM Class 3600, 3610, and 3810; ANSI/ISA 61010-1 (82.02.01), 60079-0 and 60079-11
IEC 60079-0, IEC 60079-11
United States
IECEx
P/N 39616 Rev. L
www.bannerengineering.com - Tel: +1-763-544-3164
3
®
MINI-BEAM MIAD9 NAMUR Series Sensor
Approvals
MIAD9(a)(b), MI9E(b)
a = Sensing mode D, W, F, LV, LVAG, CV, CV2 or R.
b = Connecꢀon method Q or blank.
ATEX (European)
Canadian
II 1 G Ex ia IIC T5 Ta = -40°C to 70°C - 39616; Enꢀty
Enꢀty Parameters: U = 15 V dc, I = 60 mA, P = 225 mW, C = 0.3 μF, L = 0 mH.
i
i
i
i
i
IS / I,II,III / 1 / ABCDEFG / T5 Ta = -40°C to 70°C - 39616; Enꢀty
I / 0 / Ex ia / IIC / T5 Ta = -40°C to 70°C - 39616; Enꢀty
(Non-incendive) NI / I / 2 / ABCD / T5 Ta = -40°C to 70°C
Enꢀty Parameters: V
= 15 V dc, I
= 60 mA, P = 225 mW, C = 0.3 μF, L = 0 mH
Max i i i
Max
United States
IS / I,II,III / 1 / ABCDEFG / T5 Ta = 70°C - 39616; Enꢀty
I / 0 / AEx ia / IIC / T5 Ta = -40°C to 70°C - 39616; Enꢀty
(Non-incendive) NI / I / 2 / ABCD / T5 Ta = -40°C to 70°C
S / II,III / 2 / FG* / T5 Ta = -40°C to 70°C
*Class II and III, Division 2 applies only to model numbers ending in a Q suffix.
Enꢀty Parameters: V = 15 V dc, I = 60 mA, P = 225 mW, C = 0.3 μF, L = 0 mH
Max
Max
i
i
i
IECEx
Ex ia IIC T5 Ta= -40 °C to +70 °C - 35331; Enꢀty
Enꢀty Parameters: U = 15 V dc, I = 60 mA, C = 0.3 μF, L = 0 mH.
i
i
i
i
130848D
Performance Curves
Model
Excess Gain
Beam Paꢁern
Diffuse mode performance based on 90% reflectance white test card
1000
MI9E & MIAD9R
E
X
MI9E Emiꢁer
C
E
S
S
Opposed Mode
100
10
G
A
I
N
MIAD9R Receiver
1
0.01 m
(0.033')
0.10 m
(0.33')
1.0 m
(3.3')
10 m
(33')
DISTANCE
4
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 39616 Rev. L
®
MINI-BEAM MIAD9 NAMUR Series Sensor
Model
Excess Gain
Beam Paꢁern
Diffuse mode performance based on 90% reflectance white test card
1000
MIAD9LVAG
E
Retroreflective Mode
MIAD9LVAG
Retroreflective Mode
75 mm
3.0"
X
C
50 mm
100
E
2.0"
1.0"
0
25 mm
With BRT-3 Reflector
S
S
0
25 mm
50 mm
75 mm
1.0"
2.0"
3.0"
MIAD9LVAG
MIAD9LV
MIAD9D
10
G
A
I
With BRT-3 Reflector
N
1
0
1 m
(3')
2 m
(6')
3 m
(9')
4 m
(12')
5 m
(15')
0.01 m
(0.033')
0.10 m
(0.33')
1.0 m
(3.3')
10 m
(33')
DISTANCE
DISTANCE
1000
MIAD9LV
Retroreflective Mode
E
MIAD9LV
75 mm
3.0"
X
C
E
S
S
50 mm
25 mm
0
2.0"
1.0"
0
100
10
Retroreflective Mode
With BRT-3 Reflector
25 mm
50 mm
75 mm
1.0"
2.0"
3.0"
G
A
I
With BRT-3 Reflector
N
0
1 m
(3')
2 m
(6')
3 m
(9')
4 m
(12')
5 m
(15')
1
0.01 m
(0.033')
0.10 m
(0.33')
1.0 m
(3.3')
10 m
(33')
DISTANCE
DISTANCE
1000
100
10
MIAD9D
Diffuse Mode
MIAD9D
Diffuse Mode
E
15 mm
0.6"
X
C
E
S
S
10 mm
5 mm
0
0.4"
0.2"
0
5 mm
10mm
15 mm
0.2"
0.4"
0.6"
G
A
I
N
0
75 mm 150 mm 225 mm 300 mm 375 mm
1
(3")
(6")
(9")
(12")
(15")
1 mm
(0.04")
10 mm
(0.4")
100 mm
(4")
1000 mm
(40")
DISTANCE
DISTANCE
1000
MIAD9W
Divergent
Diffuse Mode
MIAD9W
Divergent Mode
E
X
C
E
S
S
15 mm
0.6"
10 mm
5 mm
0
0.4"
0.2"
0
100
10
5 mm
10mm
15 mm
0.2"
0.4"
0.6"
MIAD9W
G
A
I
N
1
0
25 mm
(1")
50 mm
(2")
75 mm 100 mm 125 mm
(3") (4") (5")
0.01 mm
(0.004")
1 mm
(0.04")
10 mm
(0.4")
100 mm
(4")
DISTANCE
DISTANCE
P/N 39616 Rev. L
www.bannerengineering.com - Tel: +1-763-544-3164
5
®
MINI-BEAM MIAD9 NAMUR Series Sensor
Model
Excess Gain
Beam Paꢁern
Diffuse mode performance based on 90% reflectance white test card
1000
1000
MIAD9CV
MIAD9CV
E
E
X
Convergent Mode
X
Convergent Mode
C
E
S
S
C
100
100
E
S
S
10
G
A
I
MIAD9CV
10
G
A
I
N
1
N
0.1 mm
(0.004")
1 mm
(0.04")
10 mm
(0.4")
100 mm
(4")
1
0.1 mm
(0.004")
1 mm
(0.04")
10 mm
(0.4")
100 mm
(4")
DISTANCE
DISTANCE
1000
MIAD9CV2
MIAD9CV2
Convergent Mode
E
X
C
E
S
S
3 mm
1.2"
Convergent Mode
2 mm
1 mm
0
0.08"
0.04"
0
100
10
1 mm
2 mm
3 mm
0.04"
0.08"
1.2"
MIAD9CV2
G
A
I
N
0
25 mm
(1")
50 mm
(2")
75 mm 100 mm 125 mm
(3") (4") (5")
1
1 mm
(0.04")
10 mm
(0.4")
100 mm
(4")
1000 mm
(40")
DISTANCE
DISTANCE
1000
MIAD9F
E
X
C
E
S
S
MIAD9F
Opposed Mode
Opposed Mode
Glass Fibers
75 mm
3"
50 mm
25 mm
0
2"
1"
0
100
10
IT13S
IT23S
IT23S Fiber
MIAD9F—Opposed
Mode
25 mm
50 mm
75 mm
1"
2"
3"
G
A
I
IT13S Fiber
N
0
100 mm 200 mm 300 mm 400 mm 500 mm
(4")
1
(8")
(12")
(16")
(20")
1 mm
(0.04")
10 mm
(0.40")
100 mm
(4.0")
1000 mm
(40")
DISTANCE
DISTANCE
1000
MIAD9F
E
X
C
E
S
S
MIAD9F
Diffuse Mode
1.8 mm
.075"
Diffuse Mode
Glass Fibers
1.2 mm
.06 mm
0
.050"
.025"
0
100
10
BT13S
BT23S
BT23S Fiber
.06 mm
1.2 mm
1.8 mm
.025"
.050"
.075"
MIAD9F—Diffuse Mode
G
A
I
BT13S Fiber
N
0
7.5 mm 15 mm 22.5 mm 30 mm 37.5 mm
1
(0.3")
(0.6")
(0.9")
(1.2")
(1.5")
0.1 mm
(0.004")
1 mm
(0.04")
10 mm
(0.40")
100 mm
(4")
DISTANCE
DISTANCE
6
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 39616 Rev. L
®
MINI-BEAM MIAD9 NAMUR Series Sensor
Dimensions
3.2 mm
(0.13")
12.2 mm (0.48")
30.7 mm
(1.21")
ø 3 mm Clearance (2)
24.1 mm
(0.95")
M18 x 1 x 15 mm Thread
(Mounting Nut Supplied)
2 m (6.5') Cable
Mounting Peg
(ø 6.3 mm x 2.5 mm)
19.1 mm
(0.75")
66.0 mm
(2.60")
27.4 mm (1.08")
Figure 2. Opposed, Retro, Diffuse, Convergent Models (Suffix E, R, LV, D, and CV)
M12 x 1 Thread
Quick-disconnect
Bezel
18.5 mm
(0.73")
18.0 mm
(0.71")
Fiber Optic Fitting
31.2 mm (1.23")
69.9 mm
(2.75")
13.2 mm
(0.52")
51.8 mm
(2.04")
Figure 3. Diffuse Models (suffix W)
Figure 4. Glass Fiber Models (suffix F)
Accessories
Quick-Disconnect (QD) Cables
4-Pin Threaded M12/Euro-Style Cordsets (for use with NAMUR sensors)
Model
Length
Style
Dimensions
Pinout (Female)
MQD9-406
MQD9-415
1.83 m (6 ꢁ)
4.57 m (15 ꢁ)
44 Typ.
2
3
1
4
Straight
M12 x 1
ø 14.5
MQD9-430
9.14 m (30 ꢁ)
1 = Brown
2 = Blue
P/N 39616 Rev. L
www.bannerengineering.com - Tel: +1-763-544-3164
7
®
MINI-BEAM MIAD9 NAMUR Series Sensor
4-Pin Threaded M12/Euro-Style Cordsets (for use with NAMUR sensors)
Model
Length
Style
Dimensions
Pinout (Female)
MQD9-406RA
MQD9-415RA
1.83 m (6 ꢁ)
4.57 m (15 ꢁ)
32 Typ.
[1.26"]
30 Typ.
[1.18"]
Right-Angle
MQD9-430RA
9.14 m (30 ꢁ)
M12 x 1
ø 14.5 [0.57"]
Brackets
SMB312S
SMB46U
70
B
C
•
•
Right-angle
U bracket for sensor
protecꢀon
•
Stainless steel 2-axis, side-
mount bracket
46
•
14-ga. 316 stainless steel
B
54
A
32
A
20
65
A = 4.3 × 7.5, B = diam. 3, C = 3 × 15.3
Hole center spacing: A = 16.0
Hole size: A = 16.5 × 18.7, B = 34.0 × 13.0
SMB312B
SMB18A
30
24
23
•
Right-angle mounꢀng
bracket with a curved slot
for versaꢀle orientaꢀon
12-ga. stainless steel
18 mm sensor mounꢀng
hole
51
•
Stainless steel 2-axis,
boꢃom-mount bracket
C
41
•
Includes mounꢀng foot
A
B
•
•
A
B
46
C
•
Clearance for M4 (#8)
hardware
A = diam. 6.9, B = 4.3 × 10.5, C = 3.1 ×
15.2
Hole center spacing: A to B = 24.2
Hole size: A = ø 4.6, B = 17.0 × 4.6, C = ø 18.5
SMB312PD
SMB18FA..
66
B
•
Right-angle mounꢀng
bracket with a curved slot
for versaꢀle orientaꢀon
•
Swivel bracket with ꢀlt and pan
movement for precision
adjustment
A
46
•
•
12-ga. stainless steel
18 mm sensor mounꢀng
hole
•
•
•
Easy sensor mounꢀng to
B
extruded rail T-slots
69
A
Metric and inch size bolts
available
18 mm sensor mounꢀng hole
41
•
Clearance for M4 (#8)
hardware
C
32
Hole size: B=ø 18.1
Hole center spacing: A to B = 24.2
Hole size: A = ø 4.6, B = 17 × 4.6, C = ø 18.5
Model
Bolt Thread (A)
3/8 - 16 × 2 in
M10 - 1.5 × 50
SMB18FA
Note: Not for use with plasꢀc fiber opꢀc sensors
SMB18FAM10
SMB18FAM12
n/a; no bolt included. Mounts
directly to 12 mm (½ in) rods
8
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 39616 Rev. L
®
MINI-BEAM MIAD9 NAMUR Series Sensor
SMB46L
SMB18Q
54
•
•
•
Right-angle
L bracket
14-ga. 316 stainless steel
•
•
Right-angle ꢂanged bracket
18 mm sensor mounꢀng
hole
46
A
•
12-ga. stainless steel
65
41
B
C
A
30
27
Hole center spacing: A to B = 24.2
Hole size: A = ø 4.6, B = 17.0 × 4.6, C = ø 19.0
Hole center spacing: A = 16.0
Hole size: A = 16.5 × 18.7
SMB46S
SMB18SF
51
43
65
16
•
•
•
Right-angle
S bracket
14-ga. 316 stainless steel
•
18 mm swivel bracket with
M18 × 1 internal thread
Black thermoplasꢀc polyester
Stainless steel swivel locking
hardware included
B
•
•
42
54
25
A
A
B
Hole center spacing: A = 36.0
Hole size: A = ø 5.3, B = ø 18.0
Hole center spacing: A = 16.0
Hole size: A = 16.5 × 18.7, B = 34.0 × 10.0
SMB3018SC
SMB18UR
67
C
•
•
•
18 mm swivel side or
•
2-piece universal swivel
bracket
300 series stainless steel
Stainless steel swivel
locking hardware included
barrel-mount bracket
B
Black reinforced
thermoplasꢀc polyester
Stainless steel swivel
locking hardware included
•
•
A
59
137
•
Mounꢀng hole for 18 mm
sensor
B
64
29
A
42
Hole center spacing: A = 50.8
Hole size: A = ø 7.0, B = ø 18.0
Hole center spacing: A = 25.4, B = 46.7
Hole size: B = 6.9 × 32.0, C = ø 18.3
SMB30SUS
SMBAMS18P
67
•
•
•
Side-mount swivel with
•
•
•
Flat SMBAMS series bracket
extended range of moꢀon
with 18 mm hole
C
Black reinforced thermoplasꢀc
polyester
Stainless steel swivel locking
hardware included
Arꢀculaꢀon slots for 90+°
rotaꢀon
12-ga. (2.6 mm) cold-rolled
steel
78
B
58
29
A
B
A
45
Hole center spacing: A = 50.8, B = 24.1
Hole size: A = ø 7, B = ø 7.6
Hole center spacing: A = 26.0, A to B = 13.0
Hole size: A = 26.8 × 7.0, B = ø 6.5, C = ø 19.0
P/N 39616 Rev. L
www.bannerengineering.com - Tel: +1-763-544-3164
9
®
MINI-BEAM MIAD9 NAMUR Series Sensor
SMB30SK
SMBAMS18RA
68
•
Flat-mount swivel bracket with
•
•
•
Right-angle SMBAMS series
A
extended range of moꢀon
bracket with 18 mm hole
40
B
•
•
Black reinforced thermoplasꢀc
polyester and 316 stainless steel
Stainless steel swivel locking
hardware included
Arꢀculaꢀon slots for 90+°
rotaꢀon
12-ga. (2.6 mm) cold-rolled
steel
57
C
48
78
A
45
B
Hole center spacing: A = 50.8
Hole size: A = ø 7, B = ø 18
Hole center spacing: A = 26.0, A to B = 13.0
Hole size: A = 26.8 × 7.0, B = ø 6.5, C = ø 19.0
Repairs and Translaꢀons
Obtain assistance with product repairs by contacꢀng your local Banner Engineering Corp distributor or by calling Banner directly at (763)
544-3164. Access literature translated into your naꢀve language on the Banner website at www.bannerengineering.com or contact
Banner directly at (763) 544-3164.
Para reparaciones de productos, por favor contacte a su distribuidor local de Banner Engineering o llame a Banner directamente al (763)
544-3164. Vea la literatura traducida en su idioma en el siꢀo web Banner en www.bannerengineering.com o comuníquese con Banner
directamente al (763) 544-3164.
Pour vous aider lors de la réparaꢀon de produits, contactez votre distributeur Banner local our appelez directement Banner au (763)
544-3164. La documentaꢀon traduite dans votre langue est disponible sur le site internet de Banner www.bannerengineering.com ou
contactez directement Banner au (763) 544-3164.
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture which, at the ꢀme it is returned to the factory, is found to have been defecꢀve during the warranty period. This warranty does not cover
damage or liability for misuse, abuse, or the improper applicaꢀon or installaꢀon of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discreꢀon of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY
OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT
DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligaꢀons or liabiliꢀes relaꢀng to any product previously
manufactured by Banner Engineering Corp. Any misuse, abuse, or improper applicaꢀon or installaꢀon of this product or use of the product for personal protecꢀon applicaꢀons when the
product is idenꢀfied as not intended for such purposes will void the product warranty. Any modificaꢀons to this product without prior express approval by Banner Engineering Corp will void the
product warranꢀes. All specificaꢀons published in this document are subject to change; Banner reserves the right to modify product specificaꢀons or update documentaꢀon at any ꢀme.
Specificaꢀons and product informaꢀon in English supersede that which is provided in any other language. For the most recent version of any documentaꢀon, refer to:
www.bannerengineering.com.
©
Banner Engineering Corp. All rights reserved
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明