MQDC-506-USB [BANNER]
Pro Editor Converter Cable;
| 型号： | MQDC-506-USB |
| 厂家： | 
Banner Engineering |
| 描述： | Pro Editor Converter Cable |
| 文件： | 总4页 (文件大小：1617K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Pro Editor Converter Cable
Datasheet
For use with Banner Pro Editor software and Banner Pro Series-enabled devices
•
•
Connects Pro Series-enabled devices to the PC-based Pro Editor software
Can be used with mating accessory ACC-PRO-CABLE5 for connection to devices with
an integral cable or terminal connection
•
•
Banner's Pro Editor software is free to download and available from the product page of
any Pro Series-enabled device or at www.bannerengineering.com/proeditor
Full preview capabilities are available with the use of power supply PSW-24-1 and
splitter CSB-M1251FM1251M
Note: When connected to a Microsoft Windows 10 device for the first time, the Pro Converter Cable
automatically installs the correct Microsoft driver.1 When connected to a Microsoft Windows 7 device for the
first time, the Pro Converter Cable drivers must be installed manually. For more information, see
www.bannerengineering.com/proeditor and search p/n 206058 to view the Pro Editor software instruction
manual.
Model
Adapter
Length
Connections
MQDC-506-USB
Pro Editor Software
1.83 m (6 ft)
USB and 5-pin M12/Euro-style quick disconnect
Pro Editor Software
Banner's Pro Editor software offers an easy way to configure Pro Series-enabled touch and
indicator devices, allowing users full control of device states and device logic modes.
Use the Pro Converter Cable to connect Pro Series-enabled devices to read, write, and
preview device states.
For more information, see www.bannerengineering.com/proeditor and search p/n 206058
to view the Pro Editor software instruction manual.
Features
PWR (Cable Power Indicator)
INF (Device Information Indicator)
LED Behavior
Condition
LED Behavior
Condition
PWR INF
Off
No power
Off
Device power off
Device power on
Device power fault
Slow flashing green (0.5 Hz)
Normal mode
Solid amber
Fast flashing red (10 Hz)
Figure 1. Pro Converter Cable LED
Indicators
1
®
®
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
Original Document
206059 Rev. C
11 March 2019
206059
Pro Editor Converter Cable
Full Preview Capabilities Setup (Recommended)
Key
A = Pro Converter Cable (MQDC-506-USB)
B = Splitter (CSB-M1251FM1251M)
C = PC running Pro Editor software
D = Any Banner Pro Series-enabled device (K50 shown)
E = Power Supply (PSW-24-1)
E
F = 8-Pin to 5-Pin Double-Ended Cordset
(MQDC-801-5M-PRO), required for 8-Pin models
A
C
D
B
F
Install the Pro Converter Cable Driver (Windows 7)
When connected to a PC running Microsoft Windows 7 for the first time, the Pro Converter Cable drivers must be installed
manually. To manually install the Pro Converter Cable driver on a Windows 7 device, follow these steps.
Note: After connecting the Pro Converter Cable to a PC running Microsoft Windows 7 the following message
may appear: "Device driver software not successfully installed".
1. Download the latest driver file from www.bannerengineering.com/proeditor.
2. Open Control Panel.
3. Open Device Manager (in the System and Security category). The Pro Converter Cable is listed as Communications
Translator under Other Devices with an exclamation mark icon next to it indicating that the device driver has not been
successfully installed.
4. Right-click on Communications Translator and select Update Driver Software....
5. Click Browse my computer for driver software.
6. Click Let me pick from a list of device drivers on my computer.
7. Make sure that Show All Devices is selected and click Next.
8. Click Have Disk....
9. Click Browse... and select the driver file. For example, banner0x00D2_cdc.inf.
10. Click OK.
11. A warning displays that the driver is unsigned. Click Yes.
The Pro Converter Cable is listed as a COM Port under Ports in Device Manager.
Specifications and Requirements
Pro Converter Cable Specifications
Pro Editor Software PC Requirements
Input Voltage
5 V dc from USB Type A connector
Indicators
2 LED indicators:
Green Flashing: Power on
Amber Solid: Device on
Red Flashing: Device power fault
Operating System
®
Screen Resolution
1366 × 768 full color minimum
®
Microsoft Windows operating
system versions 7 or 10
Output Voltage
20 V dc
Third-Party Software
.NET version 4.5.2 or higher
Hard Drive Space
20 MB
Banner Compatible Devices
Communications
USB
View compatible devices at
www.bannerengineering.com/
proeditor
5-pin M12/Euro-style quick
disconnect connector compatible
with Banner Pro Series-enabled
devices
Available USB port
Certifications
Important: Administrative rights are
required to install the Pro Editor software.
2
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 206059 Rev. C
Pro Editor Converter Cable
Accessories
Pro Editor Hardware
PRO-KIT
Includes:
PRO-KIT-K50
Includes:
•
Pro Converter Cable (MQDC-506-
USB)
•
Pro Series-enabled K50
(K50L2RGB7Q)
•
•
Splitter (CSB-M1251FM1251M)
Power Supply (PSW-24-1)
•
Pro Converter Cable (MQDC-506-
USB)
Splitter (CSB-M1251FM1251M)
Power Supply (PSW-24-1)
•
•
MQDC-506-USB
CSB-M1251FM1251M
•
•
Pro Converter Cable
•
•
•
5-pin parallel Y splitter (Male-
Male-Female)
1.83 m (6 ft) M12/Euro-style quick
disconnect to Device and USB to
PC
Required for connection to Pro
Editor
For full Pro Editor preview
capability
Requires external power supply,
sold separately
•
PSW-24-1
ACC-PRO-CABLE5
•
•
24 V dc, 1 A power supply
2 m (6.5 ft) PVC cable with M12/
Euro-style quick disconnect
Provides external power with
splitter cable, sold separately
•
Mating accessory for cabled and
terminal models
•
150 mm (6 inch) PVC cable with
M12/Euro-style quick disconnect
Lever wire nuts included (qty 5)
Required to connect cabled
models to Pro Converter Cable,
sold separately
•
•
•
x5
MQDC-801-5M-PRO
•
•
•
8-pin to 5-pin double-ended
cordset
0.31 m (1 ft) PVC cable with M12/
Euro-style quick disconnects
Required to connect 8-pin Pro
Series-enabled devices to Pro
Converter Cable (MQDC-506-
USB), sold separately
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not
cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO
BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES
RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT,
STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously
manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the
product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will
void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at
any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to:
www.bannerengineering.com.
For patent information, see www.bannerengineering.com/patents.
P/N 206059 Rev. C
www.bannerengineering.com - Tel: + 1 888 373 6767
3
Pro Editor Converter Cable
FCC Part 15 and CAN ICES-3 (B)/NMB-3(B)
This device complies with part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions:
1.
2.
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the manufacturer.
©
Banner Engineering Corp. All rights reserved
相关型号：
©2020 ICPDF网 联系我们和版权申明