MQDC-WDSS-0530 [BANNER]
K50 Pro Touch Button;
| 型号： | MQDC-WDSS-0530 |
| 厂家： | 
Banner Engineering |
| 描述： | K50 Pro Touch Button |
| 文件： | 总7页 (文件大小：991K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
K50 Pro Touch Button
Datasheet
50 mm Programmable Multicolor RGB Indicator with Independent Momentary or Latching Touch Button Output
•
Excellent immunity to false triggering by water spray, detergents, oils, and other foreign
materials
•
•
•
•
•
•
Programmable using Banner's Pro Editor software and Pro Converter Cable
Vibration feedback models available for an unmistakable touch confirmation
Up to 14 default colors with flash input in one unit
Devices are completely self-contained—no controller needed
Rated IEC IP67 and IP69K per DIN 40050-9
Standard Model
Ergonomically designed to eliminate hand, wrist, and arm stresses associated with repeated
switch operation; no physical force required to operate
•
•
•
•
•
•
12 V dc to 30 V dc operation
Can be actuated with bare hands or gloves; adjustable sensitivity using Pro Editor software
Compact models available for lower profile applications
Models constructed from FDA-grade materials available
Configurable input/output with Pro Editor software
Device can be configured to remember touch state on power loss using Pro Editor software
Compact Model
WARNING:
•
•
•
Do not use this device for personnel protection
Using this device for personnel protection could result in serious injury or death.
This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-
energized (off) output condition.
Models
Activation
Style Method
Output
Function
Family
K50
Housing
C
Output State
A
Color/Control
GRY3
Connector
QP
P
T
M
P = Pro
C = Compact*
Blank = Standard Dome
M = Momentary
L = Latching
Blank = 2 m PVC cable
Q** = 5-pin or 8-pin integral M12/Euro-style
quick disconnect, depending on model
QP = 150 mm (5.9 in) PVC cable with 5-pin
or 8-pin M12/Euro-style quick disconnect,
depending on model
T = Touch
TF = Touch, FDA-grade
TV = Touch, Vibration Feedback
TFV = Touch, FDA-grade, Vibration Feedback
A = Normally Open
GRY3 = Programmable Multicolor
(3 Color, 5-Pin)
RGB14 = Programmable Multicolor
(14 colors, 8-Pin)
* Not available in FDA-grade material or with vibration feedback
** Not available in FDA-grade material
Models with a quick disconnect require a mating cordset
Pro Editor
Use Banner's Pro Editor software and Pro Converter Cable to create custom
configurations by selecting different colors, flash patterns, and animations.
For more information visit www.bannerengineering.com/proeditor.
Original Document
207477 Rev. D
21 August 2019
207477
K50 Pro Touch Button
Wiring Diagrams
For the Vibration Feedback models, for all touch conditions, the default Vibration Feedback is On and the type of vibration
feedback is Steady.
GRY3 Models
NPN
PNP
Key
Pin 1 = Brown
Pin 2 = White*
Pin 3 = Blue
Pin 4 = Black
Pin 5 = Gray
1
3
1
3
–
+
12-30V dc
+
12-30V dc
–
Touch toggles output
4
2
5
4
2
5
Load
Load
*Can be configured as an
output using Pro Editor
software
1*
2
1*
2
Table 1: GRY3 Multicolor Color/Function Definition
Green
Yellow
Red
X
Input 1
Input 2
X
X
X
RGB14 Models
NPN
PNP
Key
Pin 1 = White
Pin 2 = Brown
Pin 3 = Green
Pin 4 = Yellow
Pin 5 = Gray*
Pin 6 = Pink
Pin 7 = Blue
Pin 8 = Red
2
7
2
+
–
12-30V dc
+
12-30V dc
–
7
1
3
8
4
5
6
1
Load
Load
Touch toggles output
3
8
4
1
2
3
1
2
3
*Can be configured as an
output using Pro Editor
software
5
4*
4*
6
Flash Input
Flash Input
Table 2: RGB Multicolor Color/Function Definition
Lime
Spring
Red
X
Yellow
Green
Cyan
Blue
Magenta
X
White
Amber
Rose
Orange
Sky Blue
Violet
X
Green
Green
Input 1
Input 2
Input 3
Input 4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 207477 Rev. D
K50 Pro Touch Button
Specifications
Supply Voltage
Pro Editor Configuration
12 V dc to 30 V dc
Connection to Pro Editor software enables control of:
Animation: Steady, Flash, Two Color Flash, 50/50, 50/50 Rotate,
Chase, Intensity Sweep, Demo
•
Supply Current
175 mA maximum current at 12 V dc (exclusive of load)
93 mA maximum current at 24 V dc (exclusive of load)
82 mA maximum current at 30 V dc (exclusive of load)
•
Color: Green, Red, Yellow, Blue, White, Cyan, Magenta, Amber,
Rose, Lime Green, Orange, Sky Blue, Violet, Spring Green
•
•
•
Intensity: Low, Medium, High
Speed: Slow, Standard, Fast
Supply Protection Circuitry
Output State: Normally Open, Normally Closed, Momentary,
Latching, On Delay, Off Delay, Remember Touch State on Power
Loss
Protected against reverse polarity and transient voltages
Leakage Current Immunity
400 µA
•
•
•
Vibration Feedback: On, Pattern, Off
Touch Sensitivity: Low, Standard, High
Output Rating
Logic Type: Three State Advanced Control (F2 Mode), Seven
State Advanced Control (F2 Mode), Four State Full Logic (Custom)
One pin configurable as either an input or an output
Maximum load: 150 mA
ON-state saturation voltage: < 2 V dc at 10 mA; <2.5 V dc at 150 mA
OFF-state leakage current: <10 µA at 30 V dc
•
Pro Converter Cable required to interface between PC and indicator, see
accessories
Output Response Time
Default Indicator Characteristics
Power-Up Delay: 500 milliseconds maximum
Input Response: 40 milliseconds maximum
Output Response: 300 milliseconds maximum
Dominant
Wavelength (nm)or
Color Temperature
(CCT)
Color
Coordinates
Lumen
Output
(Typical at
1
Color
2
Touch Dwell Time
x
y
25 °C)
If touch dwells for longer than 60 seconds, the output will revert to the
untouched state
Green
Red
522
620
576
466
5700K
493
–
0.154
0.689
0.477
0.140
0.328
0.170
0.379
0.556
0.515
0.388
0.155
0.616
0.217
0.177
0.700
0.309
0.493
0.054
0.337
0.340
0.172
0.420
0.220
0.561
0.247
0.370
0.089
0.536
16.5
8.3
Vibration Feedback Characteristics
Max Total On-Time Per Touch: 3 seconds
Mechanical Life: 500,000 cycles
For all touch conditions, the default Vibration Feedback is On and the type
of vibration feedback is Steady
Yellow
Blue
23.8
4.6
White
25.1
18.4
11.1
15.7
9.1
Cyan
Operating Conditions
–40 °C to +50 °C (–40 °F to +122 °F)
Humidity: 90% at +50 °C maximum relative humidity (non-condensing)
Magenta
Amber
Rose
589
–
Environmental Rating
Standard Models: IEC IP67, IP69K per DIN 40050-9
Cabled models also meet IP69K per DIN 40050-9 if the cable and cable
entrance are protected from high-pressure spray
Lime Green
Sky Blue
Orange
Violet
562
486
599
–
21.4
19.5
12.1
9.7
FDA Models: IEC IP67, IP69K per DIN 40050-9
Mounting
M30 × 1.5 threaded base, maximum torque 4.5 N·m (40 in·lbf)
Spring
Green
508
17.0
Construction
Standard Model Base, Dome, and Nut: Polycarbonate
FDA Model Base, Dome, and Nut: FDA-grade copolyester
Vibration and Mechanical Shock
Required Overcurrent Protection
WARNING: Electrical connections must be
Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm
amplitude, 5 minutes sweep, 30 minutes dwell)
Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms duration, half sine
wave)
made by qualified personnel in accordance with
local and national electrical codes and
regulations.
Connections
5-pin or 8-pin integral M12/Euro-style quick disconnect, 2 m (6.5 ft) integral
PVC cable, or 5-pin or 8-pin 150 mm (5.9 inch) PVC cable with a M12/Euro-
style quick disconnect, depending on model
Overcurrent protection is required to be provided by end product
application per the supplied table.
Overcurrent protection may be provided with external fusing or via Current
Limiting, Class 2 Power Supply.
Models with a quick disconnect require a mating cordset
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to www.bannerengineering.com.
Storage
–40 °C to +70 °C (–40 °F to +158 °F)
Supply Wiring (AWG)
Required Overcurrent Protection (Amps)
Certifications
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
1
Refer to the CIE 1931 (x,y) Chromaticity Diagram to show equivalent color with indicated color coordinates. Actual coordinates may differ 5%.
Values shown apply to dome models only. Compact models are 20% lower.
2
P/N 207477 Rev. D
www.bannerengineering.com - Tel: + 1 888 373 6767
3
K50 Pro Touch Button
Dimensions
Standard Models
Compact Models
35 mm
[1.38”]
17 mm
[0.67”]
55 mm
[2.17”]
37.0 mm
[1.46”]
48.0 mm
[1.89”]
66 mm
[2.6”]
M30 x 1.5
M12 x 1
Ø50 mm
[1.97”]
Ø50 mm
[1.97”]
All measurements are listed in millimeters [inches], unless noted otherwise.
Accessories
Pro Editor Hardware
MQDC-506-USB
CSB-M1251FM1251M
•
•
Pro Converter Cable
•
•
•
5-pin parallel Y splitter (Male-
Male-Female)
1.83 m (6 ft) M12/Euro-style quick
disconnect to Device and USB to
PC
For full Pro Editor preview
capability
•
Required for connection to Pro
Editor
Requires external power supply,
sold separately
PSW-24-1
ACC-PRO-CABLE5
•
•
24 V dc, 1 A power supply
•
Mating accessory for cabled and
terminal models
2 m (6.5 ft) PVC cable with M12/
Euro-style quick disconnect
•
150 mm (6 inch) PVC cable with
M12/Euro-style quick disconnect
•
Provides external power with
splitter cable, sold separately
•
•
Lever wire nuts included (qty 5)
x5
Required to connect cabled
models to Pro Converter Cable,
sold separately
MQDC-801-5M-PRO
•
•
•
8-pin to 5-pin double-ended
cordset
0.31 m (1 ft) PVC cable with M12/
Euro-style quick disconnects
Required to connect 8-pin Pro
Series-enabled devices to Pro
Converter Cable (MQDC-506-
USB), sold separately
Cordsets
5-Pin Threaded M12/Euro-Style Cordsets—Single Ended
Model
Length
Style
Dimensions
Pinout (Female)
MQDC1-501.5
MQDC1-506
MQDC1-515
0.50 m (1.5 ft)
1.83 m (6 ft)
4.57 m (15 ft)
2
1
44 Typ.
3
5
4
Straight
1 = Brown
2 = White
3 = Blue
M12 x 1
ø 14.5
MQDC1-530
9.14 m (30 ft)
4 = Black
5 = Gray
4
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 207477 Rev. D
K50 Pro Touch Button
5-Pin Threaded M12/Euro-Style Cordsets—Single Ended
Model
Length
Style
Dimensions
Pinout (Female)
MQDC1-506RA
MQDC1-515RA
1.83 m (6 ft)
4.57 m (15 ft)
32 Typ.
[1.26"]
30 Typ.
[1.18"]
Right-Angle
MQDC1-530RA
9.14 m (30 ft)
M12 x 1
ø 14.5 [0.57"]
5-Pin Threaded M12/Euro-Style Washdown Stainless Steel Cordsets—Double Ended
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-WDSS-0506
MQDC-WDSS-0515
1.83 m (6 ft)
2
1
4.57 m (15 ft)
3
4
5
Ø15.5 mm
Straight
Ø4.8 mm
1 = Brown
2 = White
3 = Blue
MQDC-WDSS-0530
9.14 m (30 ft)
43.5 mm
4 = Black
5 = Gray
8-Pin Threaded M12/Euro-Style Cordsets with Open-Shield
Model
Length
Style
Dimensions
Pinout (Female)
MQDC2S-806
MQDC2S-815
MQDC2S-830
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
44 Typ.
Straight
2
3
M12 x 1
MQDC2S-850
15.2 m (50 ft)
ø 14.5
4
1
7
6
5
MQDC2S-806RA
MQDC2S-815RA
MQDC2S-830RA
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
8
32 Typ.
[1.26"]
1 = White
2 = Brown
3 = Green
4 = Yellow
5 = Gray
6 = Pink
30 Typ.
[1.18"]
Right-Angle
7 = Blue
8 = Red
MQDC2S-850RA
15.2 m (50 ft)
M12 x 1
ø 14.5 [0.57"]
8-Pin Threaded M12/Euro-Style Cordsets with Open-Shield—Washdown, Stainless Steel
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-WDSS-0806
1.83 m (6 ft)
2
44 Typ.
3
4
1
7
Straight
MQDC-WDSS-0815
4.57 m (15 ft)
5
M12 x 1
ø 14.5
6
8
P/N 207477 Rev. D
www.bannerengineering.com - Tel: + 1 888 373 6767
5
K50 Pro Touch Button
8-Pin Threaded M12/Euro-Style Cordsets with Open-Shield—Washdown, Stainless Steel
Model
Length
Style
Dimensions
Pinout (Female)
1 = White
5 = Gray
6 = Pink
7 = Blue
8 = Red
2 = Brown
3 = Green
4 = Yellow
MQDC-WDSS-0830
9.14 m (30 ft)
Brackets
SMB30A
45
SMB30FA
•
83.2
•
Right-angle bracket with curved
slot for versatile orientation
Swivel bracket with tilt and pan
movement for precise
adjustment
C
61
•
Clearance for M6 (¼ in)
hardware
•
•
•
Mounting hole for 30 mm sensor
12-ga. 304 stainless steel
B
•
•
Mounting hole for 30 mm sensor
12-ga. stainless steel
68.9
36.3
B
A
Easy sensor mounting to
extrude rail T-slot
A
69
•
Metric and inch size bolt
available
Hole center spacing: A to B=40
Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5
Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 - 1.5 x 50
Hole size: B= ø 30.1
SMB30FVK
SMB30MM
•
•
•
V-clamp, flat bracket and
fasteners for mounting to pipe or
extensions
•
12-ga. stainless steel bracket
with curved mounting slots for
versatile orientation
57
70
46
A
118
C
Clamp accommodates 28 mm
dia. tubing or 1 in. square
extrusions
•
•
Clearance for M6 (¼ in)
hardware
57
B
Mounting hole for 30 mm sensor
30 mm hole for mounting
sensors
A
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
Hole size: A= ø 31
SMB30RAVK
SMB30SC
67
A
•
•
•
V-clamp, right-angle bracket
and fasteners for mounting
sensors to pipe or extrusion
•
•
•
Swivel bracket with 30 mm
mounting hole for sensor
B
Black reinforced thermoplastic
polyester
46
58
Clamp accommodates 28 mm
dia. tubing or 1 in. square
extrusions
Stainless steel mounting and
swivel locking hardware
included
90
57
30 mm hole for mounting
sensors
29
A
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
Hole size: A = ø 30.5
45
SMBAMS30P
SMBAMS30RA
45
•
•
Flat SMBAMS series bracket
•
•
•
•
Right-angle SMBAMS series
bracket
C
C
30 mm hole for mounting
sensors
30 mm hole for mounting
sensors
53
A
A
B
93
•
•
Articulation slots for 90°+
rotation
B
Articulation slots for 90°+
rotation
12-ga. 300 series stainless steel
48
12-ga. (2.6 mm) cold-rolled steel
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
6
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 207477 Rev. D
K50 Pro Touch Button
Ø A
TC-K50-CL
•
Touch cover
B
Diameter: A = 67 mm
Height: B = 42.5 mm
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not
cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO
BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES
RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT,
STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously
manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the
product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will
void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at
any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to:
www.bannerengineering.com.
For patent information, see www.bannerengineering.com/patents.
FCC Part 15 and CAN ICES-3 (B)/NMB-3(B)
This device complies with part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions:
1.
2.
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the manufacturer.
©
Banner Engineering Corp. All rights reserved
相关型号：
©2020 ICPDF网 联系我们和版权申明