Q120RA-EU-AF2 [BANNER]

R-GAGEÂ® Q120RA-AF2 Sensor;


型号：	Q120RA-EU-AF2
厂家：	Banner Engineering
描述：	R-GAGEÂ® Q120RA-AF2 Sensor
文件：	总8页 (文件大小：438K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

R-GAGE Q120RA-AF2 Sensor

Datasheet

Radar-Based Dual-Zone Narrow-Beam Sensors for Detection of Moving and Stationary Targets

•

FMCW (true-presence) radar detects moving and stationary objects

Narrow beam pattern, high sensitivity, and long range

Two independent, adjustable sensing zones detect objects up to 40

meters away (131.2 ft)

•

Easy setup and configuration of range, sensitivity, and output with

simple DIP switches

Sensing functions are unaffected by wind, falling rain or snow, fog,

humidity, air temperatures, or light

Sensor operates in Industrial, Scientific, and Medical (ISM)

telecommunication band

Rugged IP67 housing withstands harsh environments

Protected by US patents

CAUTION: Make No Modifications to this Product

Any modifications to this product not expressly approved by Banner Engineering could void the user's

authority to operate the product. Contact Banner Engineering for more information.

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Models

Model

Sensing

Range

Connection

Supply

Voltage

Telecom Approval

Output

Telecom approved for US and

Brazil

Q120RA-US-AF2

Q120RA-EU-AF2

Two

independent

sensing

zones; 1 to

40+ meters

(131 ft)

12 to 30 V dc

12 to 24 V dc

5-wire 2 m (6.5

ft) Integral

cable

Telecom approved for Europe,

UK, Australia, New Zealand,

China, and Japan

DIP-switch-selectable

NPN or PNP; N.O. or

N.C.

Q120RA-KR-AF2

Telecom approved for South

Korea

Overview

The R-GAGE sensor emits a well-defined beam of high-frequency radio waves from an internal antenna. Some of this

emitted energy is reflected back to the receiving antenna. Signal processing electronics determine the distance from the

sensor to the object based on the time delay of the return signal. The sensor can be configured to two independent

sensing zones.

The two sensing zones are factory pre-set to default distances; they can be reconfigured for different distances using the

DIP switches on the side of the sensor. The sensor is plug-in ready for immediate operation.

The sensitivity is precalibrated at the factory, assuming that the sensing field will be clear of obstacles. The sensitivity can

be adjusted using the DIP switches on the side of the sensor.

Cabled models only are listed. For integral 5-pin Euro-style (M12) quick-disconnect fitting, add suffix "Q" to the model number

(for example, Q120RA-xx-AF2Q). QD models require a mating cordset; see Quick Disconnect (QD) Cordsets on page 8.

Original Document

157494 Rev. G

18 August 2016

157494

R-GAGE Q120RA-AF2 Sensor

1. Output LEDs: Yellow (output 1 energized); Red

(configuration)

2. Output LEDs: Yellow (output 2 energized); Red

(configuration)

3. Power LED: Green (power ON)

4. Signal Strength LED: Red (flashes in proportion to

the signal strength)

5. DIP switch row A

6. DIP switch row B

Access the DIP switches behind the threaded cap on the

sensor side

Figure 1. R-GAGE features

Zone 1

Zone 2

Figure 2. R-GAGE setpoint distances

EU, KR Models

2 m (6.6 ft)

US Model

Minimum Zone 1 setpoint distance

Maximum Zone 1 setpoint distance

3.5 m (11.5 ft)

30 m (98.4 ft)

5.5 m (18.0 ft)

55 m (180.4 ft)

30 m (98.4 ft)

4 m (13.1 ft)

55 m (180.4 ft)

Minimum Zone 2 (offset from Zone 1: 2 m to 25 m)

Maximum Zone 2 (offset from Zone 1: 2 m to 25 m)

Dead Zone

Sensor Configuration

The sensitivity and output configuration can be selected via the DIP switches on the side of the sensor. Use the included

spanner to open the screw-off cover on the side of the sensor and access the DIP switches.

Important: Tighten the DIP switch cover a full quarter turn after contact to maintain the watertight

seal.

DIP Switch Functions

Switches

Function

A1, A2, A3, A4

A5, A6, A7

Zone 1 Distance (detects objects from sensor face to this point)

Zone 2 Distance, Offset from Zone 1

Typical dead zone: 0.4 m (1.3 ft) for moving and 1.0 m (3.3 ft) for stationary targets, but varies with target reflectivity.

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 157494 Rev. G

R-GAGE Q120RA-AF2 Sensor

Switches

Function

Polarity

B1, B2, B3

B4, B5, B6

Sensitivity (higher sensitivity sees weaker objects and has a larger beam pattern)

Response Speed

Normally Open/Normally Closed output functionality

Not Used

DIP switch 1 is on the left and DIP switch 8 is on the right.

Distance Settings

Zone 1 Distance

Distance

EU, KR

2 m (6.6 ft)

3.5 m (11.5 ft)

4 m (13.1 ft)

4.5 m (14.8 ft)

5 m (16.4 ft)

5.5 m (18.0 ft)

6 m (19.7 ft)

6.5 m (21.3 ft)

7 m (23.0 ft)

8 m (26.2 ft)

10 m (32.8 ft)

12 m (39.4 ft)

14 m (45.9 ft)

16 m (52.5 ft)

20 m (65.6 ft)

25 m (82.0 ft)

30 m (98.4 ft)

2.5 m (8.2 ft)

3 m (9.8 ft)

3.5 m (11.5 ft)

4 m (13.1 ft)

5 m (16.4 ft)

6 m (19.7 ft)

7 m (23.0 ft)

8 m (26.2 ft)

10 m (32.8 ft)

12 m (39.4 ft)

14 m (45.9 ft)

16 m (52.5 ft)

20 m (65.6 ft)

25 m (82.0 ft)

30 m (98.4 ft)

* Default settings

Zone 2 Distance Offset from Zone 1

Offset

2 m (6.6 ft)

4 m (13.1 ft)

6 m (19.7 ft)

8 m (26.2 ft)

10 m (32.8 ft)

15 m (49.2 ft)

20 m (65.6 ft)

25 m (82.0 ft)

NOTE: Highest sensitivity is achieved only if the sensing distance is 36 m (118.1 ft) or less.

P/N 157494 Rev. G

www.bannerengineering.com - Tel: +1-763-544-3164

R-GAGE Q120RA-AF2 Sensor

Sensitivity Selection

Sensitivity

8 (Highest)

7...

6 (High)

5...

4 (Medium)

3...

2 (Low)

1 (Lowest)

* Default settings

NOTE: Operation at a high sensitivity not guaranteed for a zone set beyond 45 m (147.6 ft)

Output Configuration

NPN / PNP

NPN

Normally Open / Closed

PNP

* Default settings

Response Speed

ON Total (ms)

OFF Total (ms)

Total (ms)

100

150

350

650

1030

720

6120

120

300

600

1000

600

6000

120

* Default settings

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 157494 Rev. G

R-GAGE Q120RA-AF2 Sensor

Specifications

Range

Indicators

Power LED: Green (power ON)

The sensor is able to detect a proper object (see Detectable Objects)

from 1 to 40+ m (3.3 to 131.2+ ft), depending on target

Signal Strength LED: Red, flashes in proportion to signal strength.

Steady on at 4x excess gain. Only indicates signal amplitude, not

target distance.

Output LEDs: Yellow (output energized) / Red (configuration)

See Overview on page 1

Detectable Objects

Objects containing metal, water, or similar high-dielectric materials

Operating Principle

Frequency modulated continuous-wave (FMCW) radar

Adjustments

Operating Frequency

DIP-switch-configurable sensing distance, sensitivity, response time,

and output configuration

US Models: 24.075–24.175 GHz, ISM Band

EU, KR Models: 24.050–24.250 GHz, ISM Band

Construction

Maximum Output Power

ERP: 3.3 mW, 5 dBm

Housing: ABS/polycarbonate

Lightpipes: Acrylic

Access Cap: Polyester

EIRP: 100 mW, 20 dBm

Supply Voltage

Operating Temperature

US, EU models: 12 to 30 V dc, less than 100 mA, exclusive of load

KR models: 12 to 24 V dc, less than 100 mA exclusive of load

– 40° to + 65° C (– 40° to + 149° F)

Environmental Rating

Supply Protection Circuitry

IP67

Protected against reverse polarity and transient overvoltages

Connections

Delay at Power-up

Integral 5-wire 2 m (6.5 ft) cable or M12 Euro-style QD fitting. QD

models require a mating cordset

Less than 2 seconds

Output Configuration

Certifications

DIP switch A8 selects Dual NPN (default) or PNP; DIP switch B7 selects

N.O. (default) or N.C. operation; 150mA each

· Zone 1 output: white wire

; ETSI/EN 300 440; FCC part 15; ANATEL Category II; KC mark -

MSIP/RRA; CMIIT Category G; ARIB STD T-73; for others, contact

Banner Engineering

· Zone 2 output: black wire

Country of Origin: USA

Output Protection

Protected against short circuit conditions

Response Time

DIP-switch-configurable ON/OFF response time

FCC ID: UE3Q120RAUS—This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Este equipamento opera em caráter secundário, isto é, não tem direito à

proteção contra interferência prejudicial, mesmo de estações do mesmo

tipo e não pode causar interferência a sistemas operando em caráter

primário.

SRD24-IO3B24100.2TR0.1 South Korea Class A Certification

(

)

P/N 157494 Rev. G

www.bannerengineering.com - Tel: +1-763-544-3164

R-GAGE Q120RA-AF2 Sensor

Dimensions

All measurements are listed in millimeters, unless noted otherwise.

50.75

Mounting holes

Indicator LEDs

159.5

140.79

Cover for DIP switch

M12/Euro-style QD

6.5

90.8

Beam Pattern

Typical Beam Pattern (with BRTR-CC20E Radar

Target, Radar Cross Section = 50 m²)

Typical Beam Pattern (with 4 different targets) at

highest sensitivity level

Left-Right Beam Pattern

20 m

Target 4

10 m

Sensitivity 8

Sensitivity 1

Target 1

-10 m

-20 m

-10 m

-20 m

10 m

20 m

30 m

40 m

50 m

10 m

20 m

30 m

40 m

50 m

Up-Down Beam Pattern

20 m

10 m

20 m

10 m

0 m

Target 4

Sensitivity 8

Sensitivity 1

Target 1

10 m

20 m

-10 m

-20 m

10 m

20 m

30 m

40 m

50 m

10 m

20 m

30 m

40 m

50 m

Distance

1–8: Indicates sensitivity level

1: Weak Object (Radar cross section = 0.25 m²)

2: Car (Radar cross section = 3 m²)

3: Large Truck (Radar cross section = 50 m²)

4: Passenger Train (Radar cross section = 300 m²)

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 157494 Rev. G

R-GAGE Q120RA-AF2 Sensor

NOTE: The effective beam pattern depends on the sensitivity level and target properties.

Windows

The R-GAGE sensor can be placed behind a glass or a plastic window, but the configuration must be tested and the

distance from the sensor to the window must be determined and controlled prior to installation. There is typically a 20%

signal reduction when the sensor is placed behind a window.

Polycarbonate at 4 mm thickness performs well in most situations, but the performance depends on filler materials.

Thinner (1 to 3 mm) windows have high reflection. The amount of reflection depends on the material, thickness, and

distance from the sensor to the window.

Locate the sensor in a position of minimum reflection from the window, which will repeat every 6.1 mm of distance

between the sensor and the window. The positions of maximum reflection from the window repeat between the minimums,

and decrease in effect until the window is approximately 150 mm (5.9 in) away. Consult the factory for pre-tested window

materials which can be used at any distance without issue.

Additionally, the face of the window should be protected from flowing water and ice by use of a flow diverter or hood

directly above the window. Falling rain or snow in the air in front of the window, light water mist, or small beads on the

face of the window are typically not an issue. However, a thick, continuous surface of water or ice directly on the face of

the window can be detected as a dielectric boundary.

Wiring

Wiring Key:

1. Brown

2. White

12-30V dc

–

3. Blue

4. Black

5. Gray (Do not connect)

Load 1

Load 2

NOTE: Banner recommends that the shield wire

(QD cordsets only) be connected to earth ground

or dc common. Shielded cordsets are

shield (QD cordset)

recommended for all QD models.

Accessories

SMBQ240SS1

SMBWSQ120

•

Sensor mounting plate and

pivoting bracket

•

Rear-Mount Protective

Metal Enclosure

•

Provides ± 20° of tilt in one

axis for enhanced sensor

alignment

•

Supports both horizontal

and vertical sensor

mounting

•

12 gauge stainless steel

•

Required if the R-GAGE is

exposed to rain or snow

Prevents buildup of water

or ice from interfering

with sensor performance

Sensor can mount on

bracket horizontally or

vertically

SMBQ240SS2

•

Add-on accessory to be

used in conjunction with

SMBQ240SS1

Provides ± 20° of tilt in

second axis for maximum

control of sensor alignment

12 gauge stainless steel

P/N 157494 Rev. G

www.bannerengineering.com - Tel: +1-763-544-3164

R-GAGE Q120RA-AF2 Sensor

Quick Disconnect (QD) Cordsets

5-Pin Threaded M12/Euro-Style Cordsets—with Shield

Model

Length

Style

Dimensions

Pinout (Female)

MQDEC2-506

MQDEC2-515

MQDEC2-530

1.83 m (6 ft)

4.57 m (15 ft)

9.14 m (30 ft)

44 Typ.

Straight

M12 x 1

MQDEC2-550

15.2 m (50 ft)

ø 14.5

MQDEC2-506RA

MQDEC2-515RA

MQDEC2-530RA

1.83 m (6 ft)

4.57 m (15 ft)

9.14 m (30 ft)

32 Typ.

[1.26"]

1 = Brown

2 = White

3 = Blue

30 Typ.

[1.18"]

4 = Black

5 = Gray

Right-Angle

MQDEC2-550RA

15.2 m (50 ft)

M12 x 1

ø 14.5 [0.57"]

NOTE: Pin 5 is not used.

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.

will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty

period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE

OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE

LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,

CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER

ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product

previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection

applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval

by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product

specifications or update documentation at any time. For the most recent version of any documentation, refer to: www.bannerengineering.com.

Q120RA-EU-AF2 [BANNER]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E