Q45BB6D [BANNER]

Q45BB6 Series Sensors;


型号：	Q45BB6D
厂家：	Banner Engineering
描述：	Q45BB6 Series Sensors
文件：	总10页 (文件大小：731K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Q45BB6 Series Sensors

Datasheet

10 V dc to 30 V dc Photoelectric Sensors With Sinking and Sourcing Solid-State Outputs

•

Advanced one-piece photoelectric sensors with outstanding optical performance and

extremely rugged design

•

Operate from: 10 V dc to 30 V dc

Bipolar NPN (sinking)/PNP (sourcing) outputs on all models

Multiple sensing modes available: opposed, diffuse, retroreflective, and convergent,

plus glass and plastic fiber optic models

•

Selectable light/dark operate

Versatile plug-in modules available for output timing logic and/or signal strength

display

Highly visible Power, Signal (AID System ), and Output indicator LEDs

Choice of prewired 2 m (6.5 ft) or 9 m (30 ft) unterminated cable, plus Mini-style or

Euro-style quick-disconnect fittings

™

•

Versatile mounting options

Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67 rating

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Models

To order the 9 m (30 ft) cable models, add the suffix "W/30" to the cabled model number. Models with a quick disconnect

(QD) connector require a mating cable.

Opposed-Mode Emitter (E) and Receiver (R) Models

Because of their extremely high excess gain, these opposed-mode sensors are an excellent option

for sensing in contaminated or dirty areas, and are also the best choice for long-range sensing.

OPPOSED

Infrared, 880 nm

Models

Range

Cable

Supply Voltage

Output Type

Q456E Emitter

2-wire 2 m (6.5 ft) cable

4-wire 2 m (6.5 ft) cable

Q45BB6R Receiver

Q456EQ Emitter

Q45BB6RQ Receiver

Q456EQ5 Emitter

Q45BB6RQ5 Receiver

60 m (200 ft)

4-Pin Mini-style QD

4-pin Euro-style QD

10 V dc to 30 V dc

Bipolar NPN/PNP

U.S. Patent no. 4356393

Original Document

36578 Rev. E

11 November 2016

36578

Q45BB6 Series Sensors

Retroreflective-Mode Models

The visible red sensing beam of these sensors makes them very easy to align. Model

Q45BB6LP polarizes the emitted light and filters out unwanted reflections, making

sensing possible in applications otherwise considered unsuited to retroreflective

sensing. Specified using the model BRT-3 3-inch reflector (go to

RETRO

POLAR RETRO

www.bannerengineering.com additional information).

Visible red, 680 nm

(non-polarized)

Visible red, 680 nm

(polarized)

Non-Polarized

Models

Range

Cable

Supply Voltage

Output Type

Q45BB6LV

Q45BB6LVQ

Q45BB6LVQ5

4-wire 2 m (6.5 ft) cable

4-Pin Mini-style QD

4-Pin Euro-style QD

0.08 to 9 m (3 in to 30 ft)

10 V dc to 30 V dc

Bipolar NPN/PNP

Polarized

Cable

Models

Range

Supply Voltage

Output Type

Q45BB6LP

Q45BB6LPQ

Q45BB6LPQ5

4-wire 2 m (6.5 ft) cable

4-Pin Mini-style QD

4-Pin Euro-style QD

0.15 to 6 m (6 in to 20 ft)

10 V dc to 30 V dc

Bipolar NPN/PNP

Diffuse-Mode Models

These diffuse-mode models detect objects by sensing the reflection of their own emitted light. Ideal for

use when the reflectivity and profile of the object to be sensed are sufficient to return a large percentage

of emitted light back to the sensor. Model Q45BB6DX is the first choice for diffuse-mode applications

when there are no background objects to falsely return light.

DIFFUSE

Infrared, 880 nm

Short Range

Models

Range

Cable

Supply Voltage

Output Type

Q45BB6D

Q45BB6DQ

Q45BB6DQ5

4-wire 2 m (6.5 ft) cable

4-Pin Mini-style QD

4-Pin Euro-style QD

45 cm (18 in)

10 V dc to 30 V dc

Bipolar NPN/PNP

Long Range

Cable

Models

Range

Supply Voltage

Output Type

Q45BB6DL

Q45BB6DLQ

Q45BB6DLQ5

4-wire 2 m (6.5 ft) cable

4-Pin Mini-style QD

4-Pin Euro-style QD

1.8 m (6 ft)

10 V dc to 30 V dc

Bipolar NPN/PNP

High Power

Cable

Models

Range

Supply Voltage

Output Type

Q45BB6DX

Q45BB6DXQ

Q45BB6DXQ5

4-wire 2 m (6.5 ft) cable

4-Pin Mini-style QD

4-Pin Euro-style QD

3 m (10 ft)

10 V dc to 30 V dc

Bipolar NPN/PNP

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 36578 Rev. E

Q45BB6 Series Sensors

Convergent-Mode Models

These sensors are ideal for reflective sensing of very small parts or profiles, and can accurately sense the

position of parts approaching from the side. Ignores all but highly reflective objects that are outside the

sensing range.

CONVERGENT

Visible red, 680 nm

Models

Focus

Cable

Supply Voltage

Output Type

Q45BB6CV

4-wire 2 m (6.5 ft) cable

4-Pin Mini-style QD

4-Pin Euro-style QD

4-wire 2 m (6.5 ft) cable

4-Pin Mini-style QD

4-Pin Euro-style QD

38 mm (1.5 in)

Q45BB6CVQ

Q45BB6CVQ5

Q45BB6CV4

Q45BB6CV4Q

Q45BB6CV4Q5

10 V dc to 30 V dc

Bipolar NPN/PNP

Spot Size at Focus:

1.3 mm (0.05 in)

100 mm (4 in)

10 V dc to 30 V dc

Bipolar NPN/PNP

Spot Size at Focus:

1.5 mm (0.06 in)

Glass Fiber Optic Models

These models are an excellent choice for glass fiber optic applications where faster sensor response is not

important. Their high excess gain means that opposed individual fibers can operate reliably in many very

hostile environments. Also, special miniature bifurcated fiber optic assemblies with bundle sizes as small as

0.5 mm (.020 in) diameter may be used successfully for diffuse-mode sensing when using sensor model

Q45BB6F(Q). For more information on compatible glass fiber optics, go to www.bannerengineering.com.

GLASS FIBER

Infrared, 880 nm and

Visible red, 650 nm

Range: Range varies by sensing mode and fiber optics used.

Infrared, 880 nm

Models

Cable

Supply Voltage

Output Type

Q45BB6F

Q45BB6FQ

Q45BB6FQ5

4-wire 2 m (6.5 ft) cable

4-Pin Mini-style QD

4-Pin Euro-style QD

10 V dc to 30 V dc

Bipolar NPN/PNP

Visible Red, 650 nm

Models

Cable

Supply Voltage

Output Type

Q45BB6FV

Q45BB6FVQ

Q45BB6FVQ5

4-wire 2 m (6.5 ft) cable

4-Pin Mini-style QD

4-Pin Euro-style QD

10 V dc to 30 V dc

Bipolar NPN/PNP

Plastic Fiber Optic Models

Lower in cost than glass fiber optics, plastic fiber optics are ideal for use in situations where environmental

conditions allow (for example, low levels of acids, alkalis, and solvents). Most are easily cut to length in the

field, and are available in a variety of sensing end styles. For more information on compatible plastic fiber

optics, go to www.bannerengineering.com.

PLASTIC FIBER

Visible red, 660 nm

Range: Range varies by sensing mode and fiber optics used.

Models

Cable

Supply Voltage

Output Type

Q45BB6FP

Q45BB6FPQ

Q45BB6FPQ5

4-wire 2 m (6.5 ft) cable

4-Pin Mini-style QD

4-Pin Euro-style QD

10 V dc to 30 V dc

Bipolar NPN/PNP

P/N 36578 Rev. E

www.bannerengineering.com - Tel: +1-763-544-3164

Q45BB6 Series Sensors

Overview

Status indicator LEDs for power, signal, and output are clearly visible beneath a raised dome in the sensor’s transparent o-

ring-sealed polycarbonate cover. Also located beneath the sensor’s o-ring-sealed cover are controls for light/dark operate

selection and the sensitivity adjustment.

•

The power indicator (green) lights when power is applied to the sensor.

The signal indicator (red) lights when the sensor sees its modulated light source and pulses at a rate proportional

™

to the strength of the received light signal; this is the AID Alignment Indicating Device .

•

The output indicator (amber) lights when the sensor’s output is conducting. This indicator is especially useful when

a timing logic module is used and signal and output conditions are not concurrent.

1. Sensitivity adjustment

2. LEDs

•

Green LED: Power on indicator

Red LED: Signal indicator

Amber LED: Output status indicator

3. Optional LED signal strength display

4. Optional timing adjustment

5. Optional timing adjustment

6. Light/dark operate switch

Wiring Diagrams

Q45BB6 Sensors with Attached Cable

Q456E Emitters with Attached Cable

Key:

1=Brown

2=White

3=Blue

4=Black

10-30V dc

–

10-30V dc

Load

NOTE: Wiring for quick disconnect (QD) models (model suffix Q and Q5) are functionally identical.

US patent no. 4356393

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 36578 Rev. E

Q45BB6 Series Sensors

Specifications

Supply Voltage and Current

Indicators

Indicator LEDs are clearly visible beneath a raised transparent Lexan

dome on top of the sensor.

10 V dc to 30V dc (10% maximum ripple), at less than 50 mA

(exclusive of load)

Power (green) LED lights whenever 10 V dc to 30V dc power is applied,

and flashes to indicate output overload or output short circuit

Signal (red) AID System LED lights whenever the sensor sees its

modulated light source, and pulses at a rate proportional to the

strength of the received light signal

Load (amber) LED lights whenever the output is energized

Optional 7-element LED signal strength display modules

Supply Protection Circuitry

Protected against reverse polarity and transient voltages

™

Output Configuration

Bipolar: one current sourcing (PNP) and one current sinking (NPN)

open-collector transistor

Output Rating

250 mA maximum each output up to 50 °C, derated to 150 mA at

70 °C (derates 5 mA/°C)

Off-state leakage current less than 1 µA

Output saturation voltage (both outputs) less than 1 V at 10 mA and

less than 2 V at 250 mA

Construction

Molded reinforced thermoplastic polyester housing, o-ring-sealed

transparent Lexan

hardware. Designed to withstand 1200 psi washdown. The base of the

cabled models has a ½-inch NPS integral internal conduit thread.

cover, molded acrylic lenses, and stainless steel

Output Protection Circuitry

Environmental Rating

Protected against false pulse on power-up and continuous overload or

short circuit of outputs

NEMA 6, IEC IP67

Connections

Output Response Time

PVC-jacketed 2 m (6.5 ft) or 9 m (30 ft) cables; or 4-pin Mini-style

(“Q” suffix models) or 4-pin Euro-style (“Q5” suffix models) quick-

disconnect (QD) fittings are available. QD cables are ordered

separately.

Opposed mode: 2 milliseconds ON, 1 millisecond OFF

All other sensing modes: 2 milliseconds ON/OFF

NOTE: 100 millisecond delay on power-up.

Output is non-conducting during this time.

Operating Conditions

Temperature: −40 °C to +70 °C (−40 °F to +158 °F)

90% at +50 °C maximum relative humidity (non-condensing)

Repeatability

Opposed mode: 0.25 milliseconds

All other sensing modes: 0.5 milliseconds

Response time and repeatability specifications are independent of

signal strength.

Application Notes

Optional output timing modules are available. See Output Timing Logic

and Signal Strength Display Modules on page 9.

Certifications

Adjustments

Beneath sensor’s transparent cover: Light/Dark Operate select switch

and multi-turn Sensitivity control (allows precise sensitivity setting –

turn clockwise to increase gain). Optional logic and logic/display

modules have adjustable timing functions (see Output Timing Logic and

Signal Strength Display Modules on page 9)

Dimensions

Opposed, Retro, and Diffuse Sensing Modes (Model Suffix E, R, D, DL, DX, LP, and LV)

Cabled Models

Mini-Style Quick-Disconnect

Models

Euro-Style Quick Disconnect

Models

54.1 mm

(2.13")

44.5 mm

(1.75")

Lens Centerline

50.8 mm

(2.00")

69.0 mm

(2.72")

6.4 mm (0.25")

87.6 mm

(3.45")

4.5 mm (#10) Screw

Clearance (2)

7.1 mm

(0.28")

30.0 mm

(1.18")

Internal Thread

(1/2–14NPSM)

ø 6.1 (0.24")

2m (6.5') Cable

External Thread

M30 X 1.5

External thread (M30 x 1.5)

hex nut supplied

Euro-style

QD Connector

14 mm (0.6")

15 mm (0.6")

Mini-style QD Connector

Lexan is a registered trademark of General Electric Co.

P/N 36578 Rev. E

www.bannerengineering.com - Tel: +1-763-544-3164

Q45BB6 Series Sensors

Convergent Sensor Models

(CV and CV4)

Glass Fiber Optic Models

(F and FV)

Plastic Fiber Optic Models

(FP)

60.5 mm

(2.38")

61.7 mm

(2.43")

59.9 mm

(2.36")

Performance Curves

Opposed

Excess Gain

Beam Pattern

1000

Effective Beam: 13 mm

Q45E/R

Opposed Mode

Q45E/R

Opposed Mode

1.5 m

60 in

100

1.0 m

0.5 m

40 in

20 in

0.5 m

1.0 m

1.5 m

20 in

40 in

60 in

0.1 m

0.33 ft

1.0 m

3.3 ft

10 m

33 ft

100 m

330 ft

12 m

40 ft

24 m

80 ft

36 m

120 ft

48 m

160 ft

60 m

200 ft

DISTANCE

Retroreflective Non-Polarized

Excess Gain Beam Pattern

Retroreflective Polarized

Excess Gain Beam Pattern

1000

Q45LP

Q45LV

Retroreflective Mode

100

Q45LV

Retroreflective Mode

Q45LP

Retroreflective

Mode

100

75 mm

3.0 in

75 mm

3.0 in

50 mm

25 mm

2.0 in

1.0 in

50 mm

25 mm

2.0 in

1.0 in

With BRT-3 Reflector

25 mm

50 mm

75 mm

1.0 in

2.0 in

3.0 in

25 mm

50 mm

75 mm

1.0 in

2.0 in

3.0 in

With BRT-3 Reflector

.01 m

.033 ft

.10 m

.33 ft

1.0 m

3.3 ft

10 m

33 ft

.01 m

.033 ft

.10 m

.33 ft

1.0 m

3.3 ft

10 m

33 ft

1.5 m

5 ft

3 m

10 ft

4.5 m

15 ft

6 m

20 ft

7.5 m

25 ft

3 m

10 ft

6 m

20 ft

9 m

30 ft

12 m

40 ft

15 m

50 ft

DISTANCE

Diffuse-mode performance curves are based on a 90% reflectance white test card.

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 36578 Rev. E

Q45BB6 Series Sensors

Diffuse Short Range

Diffuse Long Range

Excess Gain

Beam Pattern

Excess Gain

Beam Pattern

1000

100

Q45DL

Q45D

Diffuse Mode

Q45DL

Diffuse Mode

100

15 mm

0.6 in

75 mm

3.0 in

Q45D

Diffuse Mode

10 mm

5 mm

0.4 in

0.2 in

50 mm

25 mm

2.0 in

1.0 in

5 mm

10 mm

15 mm

0.2 in

0.4 in

0.6 in

25 mm

50 mm

75 mm

1.0 in

2.0 in

3.0 in

1.0 mm

0.04 in

10 mm

0.4 in

100 mm

4.0 in

1000 mm

40 in

100 mm 200mm 300 mm 400 mm 500 mm

4.0 in 8.0 in 12.0 in 16.0 in 20.0 in

.01 m

.033 ft

.10 m

.33 ft

1.0 m

3.3 ft

10 m

33 ft

0.6 m

2 ft

1.2 m

4 ft

1.8 m

6 ft

2.4 m

8 ft

3.0 m

10 ft

DISTANCE

Diffuse High Power

Excess Gain

Beam Pattern

1000

100

Q45DX

Diffuse Mode

Q45DX

Diffuse Mode

75 mm

3.0 in

50 mm

25 mm

2.0 in

1.0 in

25 mm

50 mm

75 mm

1.0 in

2.0 in

3.0 in

0.01 m

0.033 ft

0.1 m

0.33 ft

1.0 m

3.3 ft

10 m

33 ft

0.6 m

2 ft

1.2 m

4 ft

1.8 m

6 ft

2.4 m

8 ft

3.0 m

10 ft

DISTANCE

Convergent mode performance curves are based on a 90% reflectance white test card.

Convergent (CV and CVQ Models)

Excess Gain Beam Pattern

Convergent (CV4 and CV4Q Models)

Excess Gain

Beam Pattern

1000

100

1000

100

Q45CV

Q45CV4

Convergent Mode

Q45CV4

Q45CV

3.8 mm

0.15 in

3.8 mm

0.15 in

Convergent Mode

2.5 mm

1.2 mm

0.10 in

0.05 in

2.5 mm

1.2 mm

0.10 in

0.05 in

1.2 mm

2.5 mm

3.8 mm

0.05 in

0.10 in

0.15 in

1.2 mm

2.5 mm

3.8 mm

0.05 in

0.10 in

0.15 in

1 mm

.04 in

10 mm

.4 in

100 mm

4 in

1000 mm

40 in

38 mm

1.5 in

75 mm 113 mm 150 mm 190 mm

3.0 in 4.5 in 6.0 in 7.5 in

1 mm

.04 in

10 mm

.4 in

100 mm

4 in

1000 mm

40 in

38 mm

1.5 in

75 mm 113 mm 150 mm 190 mm

3.0 in 4.5 in 6.0 in 7.5 in

DISTANCE

Glass fiber optic diffuse mode performance curves are based on a 90% reflectance white test card.

Glass Fiber Optic, Infrared (Opposed Mode) Glass Fiber Optic, Infrared (Diffuse Mode)

Excess Gain

Beam Pattern

Excess Gain

Beam Pattern

1000

100

1000

100

Q45F

Opposed Mode

IT23S Fibers

Diffuse Mode

Q45F

Diffuse Mode

150 mm

6.0 in

3.8 mm

0.15 in

Opposed Mode

100 mm

50 mm

4.0 in

2.0 in

2.5 mm

1.3 mm

0.10 in

0.05 in

IT23S Fibers

BT13S Fiber

BT23S Fiber

IT13S Fibers

BT23S Fiber

IT13S Fibers

50 mm

100 mm

150 mm

2.0 in

4.0 in

6.0 in

1.3 mm

2.5 mm

3.8 mm

0.05 in

0.10 in

0.15 in

BT13S Fiber

0.01 m

0.03 ft

0.1 m

0.33 ft

1.0 m

3.3 ft

10 m

33 ft

0.4 m

15 in

0.8 m

30 in

1.2 m

45 in

1.6 m

60 in

2.0 m

75 in

1 mm

0.04 in

10 mm

0.4 in

100 mm

4.0 in

1000 mm

40 in

25 mm

1 in

50 mm

2 in

75 mm 100 mm 125 mm

3 in 4 in 5 in

DISTANCE

P/N 36578 Rev. E

www.bannerengineering.com - Tel: +1-763-544-3164

Q45BB6 Series Sensors

Glass Fiber Optic, Visible Red (Opposed Mode)

Glass Fiber Optic, Visible Red (Diffuse Mode)

Excess Gain

Beam Pattern

Excess Gain

Beam Pattern

1000

100

1000

100

Q45FV

Diffuse Mode

Q45FV

Opposed Mode

Q45FV

Opposed Mode

Q45FV

30 mm

1.2 in

3.0 mm

0.12 in

Diffuse Mode

20 mm

10 mm

0.8 in

0.4 in

IT23S Fibers

2.0 mm

1.0 mm

0.08 in

0.04 in

IT23S Fibers

BT13S Fiber

BT23S Fiber

10 mm

20 mm

30 mm

0.4 in

0.8 in

1.2 in

IT13S Fibers

BT13S

Fiber

IT13S Fibers

1.0 mm

2.0 mm

3.0 mm

0.04 in

0.08 in

0.12 in

BT23S Fiber

1 mm

0.04 in

10 mm

0.4 in

100 mm

4.0 in

1000 mm

40 in

100 mm 150 mm 200 mm 250 mm 300 mm

4 in 6 in 8 in 10 in 12 in

1.0 mm

0.04 in

10 mm

0.4 in

100 mm

4 in

1000 mm

40 in

5 mm

0.2 in

10 mm

0.4 in

15 mm

0.6 in

20 mm 25 mm

0.8 in 1.0 in

DISTANCE

Plastic fiber optic Diffuse mode performance curves are based on a 90% reflectance white test card.

Plastic Fiber Optic (Opposed Mode) Plastic Fiber Optic (Diffuse Mode)

Excess Gain

Beam Pattern

Excess Gain

Beam Pattern

1000

100

1000

100

Q45FP

Opposed Mode

Diffuse Mode

PBT46U Fiber

Q45FP

45 mm

1.8 in

Q45FP

18 mm

0.75 in

Opposed Mode

PIT46U Fibers

Diffuse Mode

30 mm

15 mm

1.2 in

0.6 in

12 mm

6 mm

0.50 in

0.25 in

PBT46U Fiber

PIT46U Fibers

PIT26U Fibers

15 mm

30 mm

45 mm

0.6 in

1.2 in

1.8 in

6 mm

12 mm

18 mm

0.25 in

0.50 in

0.75 in

PIT26U Fibers

PBT26U Fiber

1 mm

0.04 in

10 mm

0.4 in

100 mm

4.0 in

1000 mm

40 in

0.1 mm

0.004 in

1 mm

0.04 in

10 mm

0.4 in

100 mm

4 in

10 mm

0.4 in

20 mm

0.8 in

30 mm

1.2 in

40 mm 50 mm

1.6 in 2.0 in

25 mm

1.0 in

50 mm

2.0 in

75 mm 100 mm 125 mm

3.0 in 4.0 in 5.0 in

DISTANCE

Accessories

Corsets

4-Pin Threaded M12/Euro-Style Cordsets

Model

Length

Style

Dimensions

Pinout (Female)

MQDC-406

MQDC-415

MQDC-430

1.83 m (6 ft)

4.57 m (15 ft)

9.14 m (30 ft)

44 Typ.

Straight

M12 x 1

ø 14.5

1 = Brown

2 = White

3 = Blue

MQDC-450

15.2 m (50 ft)

4 = Black

4-Pin Mini-Style Cordsets

Model

Length

Style

Dimensions

Pinout (Female)

MBCC-406

1.83 m (6 ft)

3.66 m (12 ft)

MBCC-412

52 Typ.

7/8-16UN-2B

ø 25.5

Straight

1 = Brown

2 = White

3 = Blue

MBCC-430

9.14 m (30 ft)

4 = Black

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 36578 Rev. E

Q45BB6 Series Sensors

Retroreflective Targets

Banner offers a wide selection of high-quality retroreflective targets. See

www.bannerengineering.com for complete information.

NOTE: Polarized sensors require corner cube type

retroreflective targets. Non-polarized sensors may use

any retroreflective target.

Brackets

SMB30C

SMB30MM

•

30 mm split clamp, black

PBT bracket

•

12-ga. stainless steel bracket

with curved mounting slots

for versatile orientation

•

Stainless steel mounting

hardware included

•

Clearance for M6 (¼ in)

hardware

Mounting hole for 30 mm

sensor

Mounting hole for 30 mm

sensor

Hole center spacing: A=ø 45

Hole size: B=ø 27.2

Hole center spacing: A = 51, A to B = 25.4

Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1

SMB30SC

•

Swivel bracket with 30 mm

mounting hole for sensor

Black reinforced

thermoplastic polyester

Stainless steel mounting and

swivel locking hardware

included

Hole center spacing: A=ø 50.8

Hole size: A=ø 7.0, B=ø 30.0

Output Timing Logic and Signal Strength Display Modules

Q45 sensors easily accept the addition of output timing logic and signal strength display functions. Display modules have a

™

seven-element display that gives a more precise indication of excess gain than does the AID system LED that is standard

on Q45 sensors. The modules listed below may be used with all Q45BB6 sensors. Refer to the module's datasheet for more

information.

Models

45LM58

45LM58D

45LMD

Logic and/or Display Function

Programmable output timing logic

Programmable output timing logic plus signal strength display

Signal strength display only (no timing function)

P/N 36578 Rev. E

www.bannerengineering.com - Tel: +1-763-544-3164

Q45BB6 Series Sensors

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.

will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty

period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE

OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE

LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,

CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER

ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product

previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection

applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval

by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product

specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most

recent version of any documentation, refer to: www.bannerengineering.com.

Q45BB6D [BANNER]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E